Which will be used to represent timer IDs. Thanks to Marc for the idea
to use "a strongly typed int".
QTimer got a new id() method that returns Qt::TimerId (can't overload
timerId()). Various classes in qtbase have a member named timerId(), but
a new method is needed anyway in QTimer so id() it is (this is the
reason QChronoTimer only has id() and no timerId()). Besides
timer.timerId() has an extra "timer".
This commit fixes the inconsistency between QObject using `0` timer id
to indicate "failed to start", while QTimer::timerId() returned `-1` to
indicate "timer is inactive". QTimer::id(), being a new method and all,
now returns Qt::TimerId::Invalid, which has value `0`, so that the
values match between the two classes. Extend the unittests to ensure
QTimer::timerId()'s behavior is preserved.
[ChangeLog][Core][QObject] Added Qt::TimerId enum class, that is used to
represent timer IDs.
Change-Id: I0e8564c1461884106d8a797cc980a669035d480a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QObject::startTimer() returns 0 in case of failure, for example when
someone tries to register a timer with a negative interval.
However, QTimer internally uses -1 as an invalid timer id.
This could lead to a situation when the timer was not really started,
but QTimer::isActive() returned true.
This patch fixes it in two ways:
- check the return value of QObject::startTimer() and treat 0 as an
error.
- do not treat 0 as a valid timer id when calculating the active state.
As a drive-by: move the `using namespace std::chrono_literals;`
declaration to the top of tst_qtimer.cpp, so that we do not need to
repeat it in each test case.
Fixes: QTBUG-122087
Pick-to: 6.7 6.6 6.5
Change-Id: I0e21152b2173ebb5fb0dada1b99a903a321ca9c4
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
There's no point to the file if it has no content.
Change-Id: Ie0deb59a63d5f7a654fcab1218e0a814710072ff
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The same test code is compiled by two different modules' tests, which
won't be obvious to the reader of the code unless it's pointed out
explicitly.
Change-Id: I99dba6eb186939c372636c5c1fc29799003d32a7
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's used to build different variations of the unittest,
linking against QtCore-only/QtGui, with/without GLib, that's four
individual tests.
Change-Id: Iaf0f37041dbb148134631f86be99feaa881a8ce8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The bindable property tests were not using the QTestPrivate helpers, so
add a new test which uses them.
The new tests revealed a binding loop for the interval property.
Fix it in a usual way by explicitly removing the binding and using
{set}ValueBypassingBindings() in the setter.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: If94f57938da449a68e3527aead5ebd55ba410adb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The was introduced with the rewrite of QMetaObject::invokeMethod() in
commit 0f76e55bc4, because we have an
optimization for zero timers to avoid creating a temporary
QSingleShotTimer object. The old implementation did attempt to normalize
the target slot name, but did so because it looked metamethods up using
QMetaObject::indexOfMethod:
int idx = meta->indexOfMethod(sig.constData());
if (idx < 0) {
QByteArray norm =
QMetaObject::normalizedSignature(sig.constData());
idx = meta->indexOfMethod(norm.constData());
}
The new implementation does not use this method so it didn't need to
attempt to normalize.
I am fixing this only in QTimer and not in QMetaObject::invokeMethodImpl
(even though it is trivial to do so) because I don't believe spaces in a
pure string to invokeMethod were ever expected to work:
QMetaObject::invokeMethod(obj, "slotName ", Qt::QueuedConnection);
The Q_ARG and Q_RETURN_ARG (for code not recompiled) still does
normalization inside QMetaType::fromName().
Fixes: QTBUG-116060
Pick-to: 6.5 6.6
Change-Id: I964c2b1e6b834feb9710fffd177cac60c83ef413
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Everyone must have this by now. This test was 1193 ms of CMake time.
Since this was a PUBLIC feature, I've left it around with a constant
condition.
Change-Id: Ifbf974a4d10745b099b1fffd177754538bbff245
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I28b6d3815c5f43d2c33ea65764f6f3f8f129eaf3
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amend 4d90c4e74a by clarifying why
moving the QSingleShotObject to the receiver's thread is a good
idea. Move that logic into a separate function and use that also
for the string-based connection.
Optimize the implementation by delaying the timer creation until
after we have moved the QSingleShotTimer object to the target
thread, using a queued metacall if needed to create the timer.
This avoids the creation of the timer in the wrong thread and
then the recreation of the timer in the new thread when QObject
handles QEvent::ThreadChange.
To avoid that the timer is created when it has already expired in
real time, use a deadline timer and fire timeout immediately when
it has expired by the time we get the metacall.
Since the timerId might now not be initialized in the constructor,
initialize it to -1.
Augment the crossThreadSingleShotToFunctor test function by
deliberately not starting the thread until the deadline expired.
[ChangeLog][Core][QTimer] Single-shot timers with a string-based
connection are now started in the receiver's thread, not in the
thread that creates the timer.
Task-number: QTBUG-112162
Change-Id: I3fc94c34c21d9f644da41a2e4c2da479980b8580
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 4d90c4e74a, after which the test
became flaky. We need to wait for the functor to be called before
quitting the thread, otherwise we have no guarnatee that any of the
queued metacall events have been processed by the thread. Since
QThread::quit is thread-safe, we can just call it from within the
functor. This guarantees that at least one of the single-shot timers
is processed before we quit.
And since QTimer::singleShot has special code paths for 0-ms timers
(going through an explicitly queued QMetaObject::invokeMethod call
rather than through an actual QSingleShotTimer object), we need to run
the test logic with different timeouts to cover both code paths.
Task-number: QTBUG-112162
Pick-to: 6.5 6.2 5.15
Change-Id: Ide1e7b4b74dcbda72144a0d73ef5f64b0694ddbc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For single-shot timers, at least. QSingleShotTimer had either an
optimization or the only way to make new-style slot invocations by
storing the QSlotObject pointer and calling it directly. Instead of
doing that, let's just actually connect and let QObject handle the
actual delivery.
[ChangeLog][QtCore][QTimer] Fixed a bug that caused slots connected to
single-slot timers using the new-style connection mechanism to be
delivered in the wrong thread.
Fixes: QTBUG-112162
Pick-to: 5.15 6.2 6.5
Change-Id: Idd5e1bb52be047d7b4fffffd174eadb227ab65ee
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Both QTimer's and QObjectPrivate's destructors print a warning if the
current object lives on another thread and has an active timer:
QWARN : tst_QTimer::moveToThread() QObject::killTimer: Timers cannot be stopped from another thread
QWARN : tst_QTimer::moveToThread() QObject::~QObject: Timers cannot be stopped from another thread
This timer is used to ask the thread to quit, which in turn allows us to
destroy this QObject without a cross-thread warning. Because it's
already fired once and done its duty, we can make sure it's not active
by simply making it single-shot.
Pick-to: 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465067b27c044b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
__has_include(<chrono>) is always true, because C++11 chrono include
is required since 6.0.
Pick-to: 6.4 6.3 6.2
Change-Id: I50cb92571bf4f1f86e2f3f2b5f486dd3c3f30f4a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some tests in corelib/kernel need threading support, but they are not
guarded against compilation if Qt is built without threading.
Such tests have been disabled in this case.
Change-Id: I2f5dc9582f2a59b6af2a9e56638b045dca06193d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Don't rely on transitive include from qobject.h, which will go away.
Change-Id: I99dd97ff4fb1d0632d040daab0bffa2d7b85d3ae
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A recent change ( a7ca8b1a28 )
led to failure of binding removal in setInterval().
This was fixed by introducing setterScope.
This patch add unit tests for this regression.
Change-Id: Ic8da1f2d82ad6c8ccd81c9b1eff72d42cf75f28a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The tst_qtimer::zeroTimer unit test was relying on
QCoreApplication::processEvents processing all pending
events. However, for the glib backend, this is not the case.
For the glib backend, if there is an event of high
priority pending, low priority events are not processed.
This patch changes the test to use the overload with
timeout of processEvents, which does process events
until there are no more events or the timeout is reached.
Fixes: QTBUG-84291
Change-Id: I429141507b8603b57a191efa21f154493d75cc9e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looks this is redundant in fact and unneeded. The check can never be
evaluated to true, since if so, it would mean it had failed in the
previous iteration, in which we already handled the exit from the loop.
Fixed also some comments.
Task-number: QTBUG-83419
Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before, we used not so accurate QTest::qWait(50)
to measure the accuracy of more precise timer's interval.
In addition, the checked range for remainingTime (50, 200)
was probably wrong, since by definition it couldn't be more than 150,
as we started the timer with interval of 200 and waited at least 50.
In this fix we have additional "tester" timer to measure remainingTime
of "tested" timer. The "tester" is a singleShot timer with interval of
50, and is started together with "tested" timer. Whenever the "tested"
timer timeouts, it restarts the "tester" timer - this is done desired
number of times (2 by default, like in the original test).
The test itself lies now inside tester's lambda. We fix the tested
range (at least 1, no more than 150). The minimum value could in
theory be greater, but it's enough to test that it's not overdue.
Finally, we wait for expected number of test runs. We give it twice
as much time as is in theory needed.
Task-number: QTBUG-83419
Task-number: QTBUG-58519
Change-Id: I43836d787d804f22bb66515ebb215d040189c4f3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
CMake doesn't support removing subdirectories therefore one need to
convert all removal to conditional adds. The resulting code doesn't
win a beauty contest. That is because handle_subdir works on already
processed strings which means it doesn't have access to the boolean
operations. As such it can not minimize the expressions, but it works
and in the most simple cases it is pretty good.
The patch re-generates CMakeLists.txt under tests/auto/corelib/kernel
excluding qcoreapplication, qmetatype, qmimedata, qobject, qtimer,
which are suffering from unrelated problems, like for example Gui,
pthread linkage issues.
Change-Id: I18a02f6eda7a3b41b1313211c8bc9ce277bb67be
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Ahmad Samir
Ivan Solovev
Lucie Gérard
Edward Welbourne
Thiago Macieira
Alexandru Croitor
Volker Hilsheimer
Friedemann Kleint
Marc Mutz
Konrad Kujawa
Mikolaj Boc
Andreas Buhr
Joerg Bornemann
David Skoland
Edward Welbourne
Lars Knoll
Jarek Kobus
Tony Sarajärvi
Leander Beernaert
Tor Arne Vestbø
Daniel Smith
Jędrzej Nowacki