According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This was disabled in d0d1d74033, I guess
accidentally, by a too-wide conditional. The change the same commit
applied to QtNetworkSettings didn't make the same mistake.
I am also opportunistically updating the conditional to QT_CONFIG (I
missed this in 9d4579c1cd) and adding the
Linux-specific check, as the AF_NETLINK implementation does not rely on
getifaddrs() or if_nametoindex().
Drive-by fix indentation.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177ef8fcb11b4e1e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove all "#undef QT_NO_FOREACH" white-listing from source files.
Previous commits have removed all remaining Q_FOREACH/foreach uses in
this sub-tree.
Also remove one source file from NO_PCH_SOURCES in CMakeLists.txt.
Task-number: QTBUG-115839
Change-Id: I02cf994eda720c028e613407342fbd6658fa62b1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The loops were iterating over a temporary, so use a local const auto
variable to hold it, and use ranged-for.
Drive-by, make the for-loop variable const& instead of copying it,
for any object that has a d-pointer (QNetworkAddressEntry, QHostAddress,
QNetworkInterface).
Task-number: QTBUG-115839
Change-Id: If96c0b2a6142fe2fa2ed45ed7e2435cc1f80e005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All of these fall into the trivial category: loops over (readily made)
const local containers. As such, they cannot possibly depend on the
safety copy that Q_FOREACH performs, so are safe to port as-is to
ranged for loops.
There may be more where these came from, but these were the ones that
stood out as immediately obvious when scanning the 100s of uses in
qtbase, so I preferred to directly fix them over white-listing their
files with QT_NO_FOREACH (which still may be necessary for some files,
as this patch may not port all uses in that file).
Pick-to: 6.6 6.5
Task-nubmber: QTBUG-115839
Change-Id: I7b7893bec8254f902660dac24167113aca855029
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I000cd3b0809b6417c3b1ab520e4de746afee71fc
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Adds docker support and makes it no longer skip the whole test
if there is no docker or network server.
Pick-to: 6.2 6.3
Change-Id: Ie98496df338a804d5c9842cce372e3410fdf9990
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Without features getifaddrs and ipv6ifname we cannot
get correct IPV6 information for interfaces.
Pick-to: 6.2 6.3
Change-Id: I7f8c4e68d345160d218fde8db640440f3324014e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
SIOCGIFNAME is now supported on QEMU.
This reverts commit 42b3ed763f.
Change-Id: I79caa371dc798464ab76851d2ea3189ec9eb0c57
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Windows apparently has special code to deal with those addresses. If all
your network interfaces are up and have acquired addresses, then the
link-local network at 169.254.0.0/16 is unreachable. I had never caught
this because both my Windows VM and my bare metal Windows have inactive
interfaces (like the Bluetooth PAN one) and, when inactive, Windows
assigns a link-local address. But in the CI, the interface(s) were all
up and running, causing this issue.
Unix systems don't treat IPv4 link-local any differently, so they always
worked, so long as any interface was up and there had to be one to reach
the network test server.
This commit reworks the test to add test addresses based on the
addresses found on up & running interfaces (see tst_qudpsocket.cpp). For
IPv4, we flip the bits in the local portion of the address. For IPv6, we
add a node with an address I generated randomly (non-universal), with
the same scope.
Fixes: QTBUG-65667
Change-Id: I568dea4813b448fe9ba6fffd15dd9f482db34991
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This allow retrieving the value of the known PMTU for the current
socket. This works on Linux (IPv6 and IPv4) and FreeBSD (IPv6 only) --
the other OSes don't have the necessary API.
Note: do we need add IP_MTU_DISCOVER?
Change-Id: I6e9274c1e7444ad48c81fffd14dcaf97a18ce335
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We document that -1 is not a valid value. The Windows structure's type
is unsigned, so the value is actually ULONG_MAX.
Change-Id: Ic632b4163d784b83951cfffd14f668645c4da3a9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtNetwork][QNetworkInterface] Added dnsEligibility() to
QNetworkAddressEntry to indicate whether the address is eligible or not
for publication in DNS or similar mechanisms.
Change-Id: Id3ae5f853d964358ac1ab19b525334a426e0e052
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtNetwork][QNetworkInterface] Added preferredLifetime() and
validityLifetime() to QNetworkAddressEntry that report the remaining
lifetime of the address in the network interface.
Change-Id: I292b84e2193979446e43344b0727642812cba630
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... so that it comments the actual code, not what this code was before.
Change-Id: Ib191b9d7bd3ae3cda39a15f0f711cb1dd3c5c2b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We don't need to bother the network test server with a TCP SYN packet.
All we need is for the local operating system to figure out the IP
address it would use to send a packet to the test server. We can do that
with QUdpSocket.
Also, the network test server hasn't been called "fluke.troll.no" for
almost a decade.
Change-Id: I209fcd5dbc2b4e5381cffffd14df65ccc7133247
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Function if_indextoname fails on qemu because SIOCGIFNAME is not
supported. Expect failure if emulation is detected.
Change-Id: I53b41286d82458661e7fa723af385f323582ce7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's possible to configure an interface so that it isn't the case. I have
no idea if this is a valid scenario, but the unit test shouldn't enforce
that.
ip addr can report:
inet 192.168.1.1/32 brd 192.168.1.255 scope global vlan0
valid_lft forever preferred_lft forever
Change-Id: I8de47ed6c7be4847b99bffff141c337575760bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
These are for faster lookups between ID and name when one doesn't need
the full information set about the interface.
Change-Id: I7de033f80b0e4431b7f1ffff13f98d448a705c3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Assam Boudjelthia
Lucie Gérard
Thiago Macieira
Ahmad Samir
Marc Mutz
Alexandru Croitor
Friedemann Kleint
Pasi Petäjäjärvi
Fabian Kosmale
Joerg Bornemann
David Skoland
Samuli Piippo
Jarek Kobus
Mårten Nordheim
Leander Beernaert
Liang Qi
Tuomas Heimonen
Timur Pocheptsov
Sami Nurmenniemi
Liang Qi
Jani Heikkinen
Friedemann Kleint