Amends commit 0756cc1eae.
The generic instantiation of this function had a std::nullptr_t *
parameter, but callers had special code to pass a nullptr there because
we never needed a value of a nullptr (it's always a null pointer). For
example, in compare_ptr_helper():
auto lhsFormatter = Internal::pointerToString<QObject>;
auto rhsFormatter = Internal::genericToString<std::nullptr_t>;
return compare_helper(t1 == nullptr, "Compared QObject pointers are not the same",
const_cast<const QObject *>(t1), nullptr,
lhsFormatter, rhsFormatter, actual, expected, file, line);
But in debug mode, some compilers did emit a load from this memory
location, causing a crash. So we just specialize this function to avoid
such.
We had a test for this... except it was never reached because the
earlier QCOMPARE() had already failed. For the test, this amends
commit ae02188233.
Conflict resolution for 6.8: regenerated the expected output for
tst_selftest.
Fixes: QTBUG-133330
Change-Id: I2cd3bb475788431c6a0dfffd28e730e8b613e033
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit e19b633c468123526660b40ae110f46090682c76)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
(cherry picked from commit 042e713cb7800f97c10d2d75a717ceb3e41ab29a)
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By wrapping the use of the timeout value in QTRY_IMPL in a lambda that
feeds the user input through the std::chrono::milliseconds constructor
with std::chrono_literals in-scope, the macros continue to work with
raw integral values as well as chrono literals not finer than
millisecond granularity.
Port all higher-level macros to pass a chrono literal and port some
uses in tst_selftests.
[ChangeLog][QtTest] The QTRY_*_WITH_TIMEOUT macros now also accept
chrono literals (was: int milliseconds).
Fixes: QTBUG-121746
Change-Id: Ib38406fc005a0a2c4ae3fd009760f73ad8bed355
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
QPalette specifically has quite a large amount of output (1363
characters) when toString
is called on it. We should make sure that we can fit that in our
failure messages. This patch does that by increasing the limit from
1024 characters to 4096.
Fixes: QTBUG-5903
Fixes: QTBUG-87039
Pick-to: 6.5 6.6
Change-Id: I1dc5078ad05858bb6542c3a06c6b84711af79e4f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
a611a9f537 (in Qt 5) added support for
mixed-type comparisons through QCOMPARE. That commit added a new
overload for qCompare taking two types, T1 and T2; but it also left the
same-type qCompare(T, T) overload around, guarded by a Qt 6 version
check.
The mixed-type version is however not a generalization of the same-type
one, because it won't work if one of the arguments doesn't participate
in FTAD. Case in point: braced-init-lists. In Qt 5 this worked:
QCOMPARE(some_container, {42});
but in Qt 6 it does not work any more. The mixed-type overload fails
deduction (can't deduce T2); in Qt 5 the same-type overload deduced
T=SomeContainer, and {42} was used to select a constructor for
SomeContainer.
--
There's a partial, straightforward workaround for this: default T2 to
T1 in the mized-type overload. In that case T2 has a "fallback" if it
cannot be deduced. This is partial because of course doesn't address
the case in which T1 cannot be deduced, but I don't think that is
common at all.
QList is special here, because it has qCompare overloads that makes it
comparable with arrays, initializer lists and more. I don't like that
very much -- we should probably have a qCompare(input_range,
input_range) overload, but that's an exercise for C++20.
Change-Id: I344ba33167829984978cd8d649a1904349a9edab
Pick-to: 6.5 6.6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The recently added test for QTestEventLoop produced a message which
the TAP test-logger mis-parses. Since that message shall soon go away
(when I fix the bug the new test exists to verify), modify one of
cmptest's QVERIFY2() messages to trip up the same bug, so we can spot
any regressions on this in future (after the imminent fix to this TAP
issue).
Change-Id: Ibbe9931c01c75df529c9571e2bbdbd34010dd9ec
Reviewed-by: Jason McDonald <macadder1@gmail.com>
In the process, simplify the latter while adding some actual
time-variation for the QTRY_* loop to navigate round - based on the
extendedcompare test's ClassWithDeferredSetter. Testing remains
primitive, but is at least a bit more thorough.
Pick-to: 6.4
Change-Id: I40be8fb485f3f18f0a4f4bc62ad36cccac691979
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Before 0681a2dd5a, QCOMPARE'ing types
for which no QTest::toString specialization exists did not output
Actual and Expected lines on failure, as that would only print <null>
for both values (which then look like the same value, confusingly).
Commit 0681a2dd5a changed that behavior,
and started printing the confusing <null> values.
Take care of the logic in the formatFailMessage function: if both values
are nullptr, then print only the variable names, but not the confusing
<null> text representation of the values.
Remove dead and duplicated code related to the formatting logic, add a
self-test function, and update the expected_cmptest files.
Fixes: QTBUG-104867
Pick-to: 6.4
Change-Id: I4be98e79f91196b14690a2cc0a68ffd50b431a45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add formatting for registered enumerations based on QMetaEnum
and unregistered enumerations as hex values.
[ChangeLog][QtTest] QtTest now prints values of QFlags that failed to
compare with QCOMPARE.
Task-number: QTBUG-65845
Change-Id: I3eae6d20d3c0d72441ca6c4037d9a8dafa4b6357
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently, when two colors are equal except for their alpha values,
QCOMPARE produces the following failure message:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #ff0000
Expected (colorB): #ff0000
By using the HexArgb format instead of the default HexRgb, we can
see the full hex string, with alpha values included:
FAIL! : tst_Test::test() Compared values are not the same
Actual (colorA): #88ff0000
Expected (colorB): #ffff0000
Task-number: QTBUG-55574
Change-Id: Id82c60a1b473ac6025a6f6ac560fce95a910d782
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Output regions as a compact list of rectangles:
QRegion(2 rectangles, 50x200+100+200, 200x50+10+10)
Change-Id: I62e42bd30897a1d31b28e0cbd6afe7fa8ecf2664
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QMetaEnum::key(n) returns the n-th key, which is not necessarily the one
of value n. For the key of value n, we want QMetaEnum::valueToKey(n).
Change-Id: Ic90fe6b1cbe84978a02fffff141bf4a06074917a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QTestLib] It is now possible to use variables of
types with an explicit operator bool in the QVERIFY macro.
Change-Id: I2685df164a616f6a065d689867daa9ea1de78e08
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a QCOMPARE of values of type QColor fails, their
name will now be printed.
Task-number: QTBUG-51124
Change-Id: I76565daa338f038ea4f452e47705e638d94eaeee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As these are strongly typed, they won't implicitly convert to int, so make sure
to cast explicitly.
Change-Id: Ic8daa31c528bbd8f399ab401d0963e13db191312
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Only QStringList was handled before, now any QList is handled.
A specialization for QStringList is still needed though, due to the way
template matching works.
Example with QList<int>. Before:
FAIL! : tst_QTextCodec::threadSafety() Compared values are not the same
Loc: [../tst_qtextcodec.cpp(2057)]
After:
FAIL! : tst_QTextCodec::threadSafety() Compared lists differ at index 0.
Actual (res2.toList()): '0'
Expected (mibList): '3'
Loc: [../tst_qtextcodec.cpp(2057)]
Change-Id: If0fdec3236ddb78a679ee549aba569ef5571c395
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Changed selftests unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ic53a70423ecafeb342cc05ae6d7dee795533d205
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Introduce a specialization for qCompare(QImage,QImage) that
checks isNull, size and format and outputs verbose messages.
Check isNull, size similarly for QPixmap.
Add an autotest:
- Add test to cmptest and make it a GUI application since
QImage requires QGuiApplication.
- Make testlib/selftests capable of running X11-GUI applications
by passing DISPLAY.
- Ignore stderr output for cmptest
- Add test data
Change-Id: I2b29c7822fbeedf2b22c90889739ed7ff859ce92
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The old test only verified the behaviour of QCOMPARE when comparing
lists that were different. Add data rows for comparing empty lists and
non-empty lists that are equal.
Note that testlib currently does not report passing data rows (only
failing rows and completely passing test functions), so the new data
rows do not cause any change in the expected test output.
Change-Id: I137650ce0ca6250cee36bd9cb74b01f8abd4e89c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The (disabled) alive selftest contained a test for the QStringList
specialization of the QTest::qCompare template. This test is unrelated
to the rest of the alive selftest, so move it to the cmptest selftest,
where QCOMPARE is tested.
Change-Id: Ic6f0e491dd3b3ce8b4ca1d49666a099815575eaa
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Each QVariant instance has internal storage which may be
used for well-know basic types. This patch changes the
behavior by delegating type dependent operation to QMetaType
class which knows more types than QVariant itself.
The patch significantly reduce amount of code in QVariant
implementation.
There are few side effects of this patch:
- better performance:
* for Core types when using Gui (QGuiVariant is able to
construct Core types)
* for small custom types (QVariant::Private::Data is used for all
types that has size small enough)
- comparing two QVariants can give different result for small custom
types (binary comparison instead of pointer comparison)
Change-Id: Ic17fa500d6a882110bfba896fd456c8e6c7a63a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Thiago Macieira
Marc Mutz
Lucie Gérard
Mitch Curtis
Giuseppe D'Angelo
Edward Welbourne
Volker Hilsheimer
Friedemann Kleint
David Skoland
Lars Knoll
Jarek Kobus
Allan Sandfeld Jensen
Liang Qi
Marc Mutz
Friedemann Kleint
Jani Heikkinen
Robin Burchell
Matti Paaso
Oswald Buddenhagen
Frederik Gladhorn
David Faure
Sergio Ahumada
Stephen Kelly
Iikka Eklund
Jason McDonald
Kurt Korbatits
Friedemann Kleint
Jędrzej Nowacki