Changing the default section size requires that we inform the parent
view of the header about size changes, and that we update the header
so that we repaint with the new section sizes. This didn't happen.
The private setDefaultSectionSize implementation does all that. However,
QHeaderView only remembers if the default section size was explicitly
overridden; it doesn't care if individual sections were resized, and
overwrites explicitly resized sections. This breaks QTreeView, where
calls to setColumnWidth resizes individual sections, but a style change
(e.g. when setting a style sheet, which results in posted events) would
then overwrite all section sizes with a new default.
To fix that, only resize those sections to the new default that had the
old default before.
This still breaks tests that assume that changing the default section
size will affect sections that have been explicitly resized. To make
those tests pass, and to minimize behavior changes, also resize sections
to the new default section size if they don't have a valid size before,
and adjust the problematic test to resize all sections to 0.
[ChangeLog][QtWidgets][QHeaderView] Changing the defaultSectionSize no
longer affects sections that don't have the old default size.
Fixes: QTBUG-116013
Change-Id: I02fee3f7fda66f4d982bacea1b4a8b14c896bb65
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
(cherry picked from commit 32578a088db5769e919a4ec5ebf33346479e7a68)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Ia26ea1623a00f17765d5530882dd83480e3bb9b8
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: Id6b4fb78c8ee52a5f5eb2a9737991e7ed648f710
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
When a slot is connected to the modelReset signal before the model is
set on the view, then such a slot might try to resize the columns or
rows to fit the contents before the view had a chance to perform layout
work.
In that case, the while-loop that calculated the size hint of a rows
(or column) by checking the size hint of each cell might not exit, as
cached information about visual indexes would be invalid.
To prevent this, don't loop over the cells if the actual last row/column
of the model (after the reset) is less than the first (cached) visible
row/column. Also, make sure we increase the counter for number of
rows/columns processed with each iteration.
Add a test (that loops infinitely without the fix, resulting in the
test being killed by the framework), and make the 'actual' variables
constant for clarity.
Fixes: QTBUG-124301
Pick-to: 6.7
Change-Id: I0adb2f1e8a1e78760ef7c19e9686c9572eca8be6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We now call setDefaultSectionSize with the new default section size.
This clamps the value to min/max section size and it will resize
affected sections.
Pick-to: 6.5 6.6
Fixes: QTBUG-116013
Change-Id: I39849aca8d0672629ce0b3ca244038c27e045d4b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I3c0d1a63c474969e5eaee5fdbb1bb0229482fc5b
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a table view adds its first row, QHeaderView::initializeSections()
is called. It initializes the vertical header view with the number of
added sections. Subsequently QHeaderView::sectionsInserted() is called
with the same amount of newly added rows/sections.
That leads to the initial amount of sections being 2x the number of
rows added in the first go. In other words, the table view will display
at least one row more than the underlying table model has.
This patch adds an OR condition to the early return check at the
beginning of QHeaderView::sectionsInserted(). The method returns early
if the number of sections equals the number of respective sections
(rows in this case) in the model.
An autotest is added in tst_QTableView::rowsInVerticalHeader().
Fixes: QTBUG-114225
Pick-to: 6.6 6.5
Change-Id: I895444f025591981965562e54e2335391db52357
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The function is used the internal window activation machinery and
should not be called by user code.
Many tests still use this function, and should be ported over to
QWidget::activateWindow(). For now they are using the private
helper in QApplicationPrivate, so that we can progress with the
public API deprecation.
Change-Id: I29f1575acf9efdcbae4c005ee9b2eb1bb0c8e5b5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The test task191545_dragSelectRows relied on the fact
that the view is not scrolling. But on a small screen,
it scrolls automatically.
Fixes: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: I691361c965ab03d8a012f2b83715c7c96d990ec5
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The view.resize() command has no effect if the requested
size is smaller than the screen. So the view has space for
the whole model. It then won't scroll, so scrolling cannot
be tested.
This patch enlarges the model so that scrolling is always
necessary and thus possible.
Task-number: QTBUG-87407
Pick-to: 6.2 6.3
Change-Id: Ibff512158d9c16be120a69c7328b6d0ae2c3b551
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As with QHoverEvent, it's better to require globalPos rather than
"initialized to QCursor::pos(), which may not be appropriate" as the
docs have pointed out for many years now. This removes the remaining
calls to QCursor::pos() in event constructors.
Task-number: QTBUG-52430
Task-number: QTBUG-69433
Task-number: QTBUG-100324
Change-Id: I076dae56f37abaad7085cc95dddee453a80a45f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We need to check whether the horizontal header's selection includes the
index for the row at the top, rather than for row 0, as the index we
check is based on the scrolled position of the header, so would never be
included in the top row when the view is scrolled. This is correctly
done in selectRow already.
Add a test case that simulates selection of rows and columns by clicking
on the header.
Fixes: QTBUG-98444
Pick-to: 6.2
Change-Id: I2fa1b32bf75dc96225b40145b713bf7e2ffc29dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QTableView stored the current row/column selection start in an own
variable instead using currentSelectionStartIndex. This leads to an
inconsistent behavior when the selection is done with a click on the
header and then in a cell (and the other way round)
Fixes: QTBUG-92561
Change-Id: I4c8bda3a938de451b6eff2819141e86a6870fbef
Pick-to: 6.1 6.2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QTableViewPrivate::heightHintForIndex()/widthHintForIndex() did not
honor spans and therefore returned too big values.
Fixes: QTBUG-89116
Change-Id: I52948902b7eaaa27c092ed39da68950c3840e8e4
Pick-to: 5.15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change lots of code to avoid the deprecated operator+() or implicit
casts to int.
Change-Id: I0c343cd5b28603afdf1214eefb85e928313345e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When the view was already sorted by the column and order given to
sortByColumn(), a resort was not triggered which is a regression since
d0f909f8db.
Therefore don't rely on sortIndicatorChanged() in this case and trigger
an explicit sort as it's done when no user-triggered sorting is enabled
Fixes: QTBUG-86268
Change-Id: I3ec30ab81f304d5a19cef6d67b8a81c21b4a112d
Pick-to: 5.15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
viewOptions returned a QStyleOptionViewItem object. Such a method
can never support newer versions of the option structure.
Most styleable QWidget classes provide a virtual method
initStyleOption that initializes the option object passed in as a
pointer, e.g QFrame, QAbstractSpinBox, or QComboBox.
Follow that API convention, but name it initViewItemOption, as the
QStyleOptionViewItem struct contains information about the item as
well as the widget itelf.
This is a source incompatible change that will go unnoticed unless
existing subclasses mark their overrides as 'override', or call
the removed QAbstractItemView::viewOption virtual function.
[ChangeLog][QtWidgets][QAbstractItemView] The virtual viewOptions
method that previously returned a QStyleOptionViewItem object has
been renamed to initViewItemOption, and initializes a
QStyleOptionViewItem object that's passed in through a pointer.
Change-Id: Ie058702aed42d77274fa3c4abb43ba302e57e348
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When topLeft and bottomRight are different in QAIV::dataChanged(), the
current implementation simply calls QWidget::update() without checking
if the affected cells are visible. This results in a big performance hit
when cells are updated frequently.
Now try to compute the exact update rect by iterating through the
modified indexes.
Fixes: QTBUG-58580
Change-Id: I97de567d494e40ed8cdb1ea1f5b3cf3a2f60455e
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
There's a timing issue that affects the position of the vertical
scrollbar when scrolling by pixels.
Change-Id: I29d73574785be539a5870b498a902b1aba887e9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move the feature to corelib so that the QMetaType enumeration
values can be properly excluded and there is no need for a
dummy class.
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Task-number: QTBUG-76493
Change-Id: I02499ebee1a3d6d9a1e5afd02517beed5f4536b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
When the first column is hidden or not visible in the current viewport,
it is not possible to deselect the current row.
Fix it by passing the correct column to
QItemSelectionModel::selectedRows() when testing if the current index is
selected.
Fixes: QTBUG-79092
Change-Id: I9d8082d2b29ad2f799156aee910c6ff6e3217771
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Volker Hilsheimer
Frédéric Lefebvre
Jonas Karlsson
Lucie Gérard
Alexandru Croitor
Axel Spoerl
Friedemann Kleint
Ahmad Samir
Marc Mutz
Tor Arne Vestbø
Andreas Buhr
Shawn Rutledge
Christian Ehrlicher
Joerg Bornemann
Assam Boudjelthia
Lars Knoll
Lars Schmertmann
Jarek Kobus
Oliver Wolff
Leander Beernaert
Qt Forward Merge Bot
Johan Klokkhammer Helsing