Ask for an uninitialized byte array, since we're about to memset(3) it
anyway. And don't overwrite the initial byte either.
Change-Id: I2caa2ef395ad5684416e6cd336c0444de7787b5d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It took me several minutes reading the code to figure out why it was
there. It wasn't immediately obvious.
Change-Id: Ic36b3fd24ce84a1b08c73986d3b7ab8a5bfff133
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This actually looks very wrong. First, it would try to read bits for
len == 0, which means it was actually reading the implicit NUL from
QByteArray (so valgrind would never catch the error).
Second, there was a corner case for testing the 8th bit (bit 7) in the
last byte. For len == 8 or 16 at the beginning of the last loop, it
would read bits[len / 8], which is again the implicit NUL from
QByteArray.
Compare to testBit (simplified):
return d.constData()[1+(i>>3)] & (1 << (i & 7)) != 0;
Task-number: QTBUG-11625
Change-Id: Idb361163de596b629cab42f2367ddd09456c2a98
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
The check is bogus anyway. It was bogus when it was added. The bug is
not because of "GCC on IRIX", it's simply a GCC bug and was probably
tied to some GCC versions. It should have been reported and followed up.
I don't even remember what GCC versions we had on the IRIX machines
(plastkrakk, I can't remember the other two machine names). But I could
bet they were GCC 3.4 or 4.0.
Change-Id: I84ce4e1ad68bb0520b63c210f841e0c604dbd03a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The ! binds to a only, which is most likely wrong here.
Change-Id: I4aa09407a8acc68f97bef474781193774e4a7597
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Before we went through non hidden indexes, but we never considered
the visual order. This patch fixes that issue.
Though it was wrong before, it probably never was a big problem
since it was unlikely that the tree (on logical index 0) was
swapped or hidden, but
658e42e77a
makes it more likely that problems with wrong focus could occur.
Change-Id: Ic7b6cd2df1f8638be1a7c9e6df27f428685869fc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make the documented QScopedPointer functions that take rvalue
references visible in the documentation.
Task-number: QTBUG-32675
Change-Id: If65af91d9379a6c0486e43c33434cca8505fc5c3
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
qdoc interprets the double-ampersand in function parameters
using rvalue references (e.g. 'Type &&other') incorrectly
as a logical AND operator, resulting in a syntax error.
This change works around the issue by treating '&' the same
as '*', and defining Q_COMPILER_RVALUE_REFS for qdoc.
Task-number: QTBUG-32675
Change-Id: I499611f16f22c33ff5b878da0cd59d67ddf53d72
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
The new Cocoa event dispatcher made apparent some deficiencies in the
way the dialog helpers were being hidden. In particular, we would not stop
a dialog helper's modal loop when closing the dialog, resulting in the
auto-tests hanging. Also, since the QApplication event loop is runnig with
[NSApp run] in the stack, the previous workarounds are no longer needed.
Task-number: QTBUG-24321
Change-Id: Ifba713c286638d78a699c319a15683d09714f06f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Since we don't spin any QEventLoop, we need to make sure events posted
by the window system interface are processed.
Change-Id: I0e7b541d86a7a14f2ecd3702e7cbdbdee9920859
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We follow the same pattern as for iOS and Windows ports, making
sure the user's main() runs in a platform friendly environment. In
this particular case, it means calling the user's main() during the
call of NSApplicationMain(), and calling the user's main() function
(renamed to qMain() as in Windows) after receiving
NSApplicationDidFinishLaunchingNotification. In practice, this means
that NSApp is running when qMain() is called, and therefore when
QCoreApplication::exec() is called.
For those command-line utilities running on QGuiApplication, or any
deriving class, and that do not provide a bundle, we override the main
bundle's dictionary and get NSApplicationMain() to run as usual.
Added cocoa/cocoamain "subdir" to build libqtcocoamain.a (together with
cocoa/cocoaplugin -- plugins/platforms/cocoa is made a subdirs project).
This library is linked against all GUI Qt apps and provides the actual
main() function. It also catches the launching NSApplication notifications,
and calls the user's qMain() function. Note that this will happen in the
same cases when the user's application will run with the Cocoa QPA plugin.
Launch related code in QCocoaApplicationDelegate is moved to libqtcocoamain,
QNSApplication is removed (but sendEvent: redirection still there), and
code in QCocoaEventDispatcher dealing with calling [NSApp run] and related
has been removed since it's become unreachable.
ChangeLog: [Qt for Mac] Make QGuiApplication::exec() run within NSApplicationMain()
Change-Id: I790e5138c29aac2e0215a9147d0148fece40ca22
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Currently just a convenience method for setNameFilters(), it uses
QMimeType to create a name filter from the glob patterns and
description defined in each MIME type.
In the longer term, this API could be used to do proper mimetype-based
filtering using QMimeDatabase::mimeTypeForFile() in the builtin
QFileDialog (aka "not native"), instead of only looking at globs via the
name filters.
Change-Id: I0edccf5f30c514481b47cd100d743d1ed7a24024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Before:
=======
Qt User Interface Compiler version 5.2.0
Usage: uic [options] <uifile>
-h, -help display this help and exit
-v, -version display version
-d, -dependencies display the dependencies
-o <file> place the output into <file>
-tr <func> use func() for i18n
-p, -no-protection disable header protection
-n, -no-implicit-includes disable generation of #include-directives
for forms generated by uic3
-g <name> change generator
After:
======
Usage: uic [options] [uifile]
Qt User Interface Compiler version 5.2.0
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --dependencies Display the dependencies.
-o, --output <file> Place the output into <file>
-p, --no-protection Disable header protection.
-n, --no-implicit-includes Disable generation of #include-directives.
--postfix <postfix> Postfix to add to all generated classnames.
--tr, --translate <function> Use <function> for i18n.
-g, --generator <java|cpp> Select generator.
Arguments:
[uifile] Input file (*.ui), otherwise stdin.
Notes:
* "-dependencies" etc. still work.
* -n option still has effect, but technically not only for ui3 files
* the fact that the <uifile> parameter is optional wasn't documented
* -postfix option was undocumented
* -translate alternative for -tr was undocumented
The last two points show the benefit of using QCommandLineParser.
Change-Id: Ie05cfb9bbe50f4ac2788aa7b6011b2daa1acde6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before:
=======
Qt resource compiler
Usage: rcc [options] <inputs>
Options:
-o file write output to file rather than stdout
-name name create an external initialization function with name
-threshold level threshold to consider compressing files
-compress level compress input files by level
-root path prefix resource access path with root path
-no-compress disable all compression
-binary output a binary file for use as a dynamic resource
-namespace turn off namespace macros
-project Output a resource file containing all
files from the current directory
-version display version
-help display this information
Undocumented: -verbose and -list !
After:
======
Usage: rcc [options] inputs
Qt Resource Compiler version 5.2.0
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-o, --output <file> Write output to <file> rather than stdout.
--name <name> Create an external initialization function with <name>.
--root <path> Prefix resource access path with root path.
--compress <level> Compress input files by <level>.
--no-compress Disable all compression.
--threshold <level> Threshold to consider compressing files.
--binary Output a binary file for use as a dynamic resource.
--namespace Turn off namespace macros.
--verbose Enable verbose mode.
--list Only list the files, do not generate code.
--project Output a resource file containing all files from the current directory.
Arguments:
inputs Input files (*.qrc).
Change-Id: If20958afd6c01df5d0d755e13e8581bc1cb9af51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Maliit upstream has its own IC which is more advanced than this one, as well as
being supported.
Change-Id: I4b820fc7f39468e53c113699c4c43c75d490f65b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jan Arne Petersen <jan.petersen@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Pekka Vuorela <pvuorela@iki.fi>
The application state is tied to the QtActivity lifecycle.
Mapping of states between Android and Qt is as follows:
onResume --> ApplicationActive
onPause --> ApplicationInactive
onStop --> ApplicationSuspended
Change-Id: Iefef08d6c7a7fde28fba1f4886882458cda6a0c0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Starting with Windows Vista, we can control the compositing window
manager using the DWM APIs. This allows us to make truly transparent
OpenGL windows.
We also have to detect and listen if compositing is enabled, otherwise
enabling transparency will cause glitches all over the place.
This (partially) fixes
Task-number: QTBUG-28214
Change-Id: I0fe1ec7adec8181b788c32de03c59142731d9e7f
Done-with: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Commit 93ffb81df6 introduced this bug. As
it is in the header, it affects downstreams.
Change-Id: I02e86927e648153ca7c0b66ac945a7f99cc4cd89
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Distance fields are stored using a one-byte alpha component per pixel, a
format that QImage doesn't currently support. The Indexed8 format was used
instead, limiting what could be done with the QImage.
This patch introduces a new private class, QDistanceField, with a similar
API to QImage and using the Alpha8 pixel format. Unlike QImage which
aligns scanlines on a 4-byte boundary, QDistanceField tightly packs
scanlines together.
Task-number: QTBUG-30908
Task-number: QTBUG-32861
Change-Id: Ic273259ea07dfbd2b81a6358c0ca11a2330eb749
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This reverts commit 9fa1bdeeb2 which
is no longer needed because the Android NDK now contains a
toolchain without the bug for which it was a work-around.
Task-number: QTBUG-31051
Change-Id: I601ba2fccb927ee7e818644de4474700e2eec8f1
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Controlling the layout from different functions is not easy, so
lets move it to the setupLayout function.
Change-Id: I3120a2e98b2f8425befa135595d4ad7ce1b8ca56
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Makes it possible for QElapsedTimer to be non-POD.
Change-Id: I5ffc59c7a93c187a4a814e6959f8383fa8d4cc44
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
If we're compiling for Pentium or better CPUs, then we know that the
CPUID instruction is present (I think it was introduced in late 486s,
actually). So don't try to detect it. Simply assume it's there and then
execute it.
This means that if you compile Qt for Pentium (or higher) and run it on
an i386 or i486, you'll get a SIGILL (or whatever your OS produces for
an #UD processor exception). If the CPU detection code even got run --
SIGILL might happen for any other instructions found along the way.
Change-Id: Iacd4a94a51363a609a61fc2bfd2e218fb290272d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The exception message might contain valuable information about what went
wrong, so we should print the message.
Change-Id: I50c986d4c18cf6115017fcc92363c946be45024d
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Comparing the value of two jobjects are not safe, as it's not guaranteed
that two jobjects that is referencing the same object,
will have the same value. To make things worse two jobjects might have
the same value even though they reference two different objects...
Change-Id: I997ea8abfb8c687c342b261bba3848cbbd741633
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
On Android, it's possible to reach the condition when window == 0
if you hit the Back key, since the previous bail-out is disabled
for this case. To avoid a null-pointer dereference, an extra
check is required.
Change-Id: Ic898cd82dd6e52c24505dd2248c98efcefc15b1c
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The documentation says that we scroll one pixel
Quote:
"QAbstractItemView::ScrollPerPixel (value 1)"
"The view will scroll the contents one pixel at a time."
However until now Qt has tried to be smarter than the
documentation, but is actually getting in the way of the user,
where a manual set value to setSingleStep will continuingly
be overwritten (on e.g resize).
This patch ensures the behavior described in the documentation
for the vertical headers - and leaves the control to the user.
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
scrollbars will now by default only scroll 1 pixel when scrollMode
is set to scrollPerPixel. That is it will (when scrollMode is
scrollPerPixel) do what is stated in the documentation, and no
longer automatically adjust the scrollbars singleStep. The user
can now control that value.
Task-number: QTBUG-7232
Change-Id: I8a61d3100be65d0c4ee32aad58caed019aa2669c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Instead of using the fake "outputdir" to force qdoc
to generate a relative path to the actual output dir,
it now uses the value of HTML.outputsubdir, or just
"html" if HTML.outputsubdir is not specified.
Task-number: QTBUG-32580
Change-Id: I45c79a788e102213e6d343a7ed108a3d17d94759
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The QCommandLineParser class provides a means for handling the command line options.
QCoreApplication provides the command-line arguments as a simple list of strings.
QCommandLineParser provides the ability to define a set of options, parse the
command-line arguments, and store which options have actually been used, as
well as option values.
Done-with: Laszlo Papp <lpapp@kde.org>
Change-Id: Ic7bebc10b3f8d8dd06ad0f4bb897c51d566e3b7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not clear why they were added, but they aren't needed anymore.
Change-Id: I1d919deefdbd6a71fa255eeac1a8543c33ba390d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Before a call to erase on a shared instance would imply that the
item was inserted into the shared data (i.e all instances)
Change-Id: I655ccf04b1ad9bf82e6bfade58929538fa7df000
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures correct detach when insert with an iterator is
called on a shared instance (i.e same behavior as QVector)
Change-Id: Id660eacd3cc7b633456dfa989997bbad747e1df2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ib3cfb5363c86b400886c80b75b0c20ca854ce801
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before calls to erase on a shared instance would in release mode
imply that items were removed from the shared data (i.e all instances).
In debug mode it would assert.
This patch improves the behavior to detach and erase items
specified by the iterator(s) (i.e same behavior as QVector)
Change-Id: I89b69446cb1ffd43a98402b7ab1ec9a59bceb8e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Change-Id: Ia44db84fc1388d92308bf0d2b32539ac4d53850b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before a call to erase on a shared instance would imply that the
item was removed from the shared data (i.e all instances)
This patch improves the behavior to detach and erase the item
specified by the iterator (i.e same behavior as QVector)
Since QSet uses QHash it improves QSet the same way.
Change-Id: I850b1efcf7bdfc85ceddb23128b048af95f75063
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Each time we call if_nametoindex, if_indextoname or somesuch, the libc
needs to open a socket, make an ioctl, and close the socket. Since we've
got most of the information we need anyway in the data from
getifaddrs(3), let's just use it
Change-Id: I572c212a27c4b9ffe57980b36f75bb04e6d5cf29
Reviewed-by: Jonas Gastal <gastal@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
moc actually generates the right code for getters returning a pointer
to the type in question, or a reference to the type (a reference, one
would assume, does not require code changes). However, the same
extension is not valid for the setter: it can't receive the new value
by pointer.
Therefore, let's soft-deprecate the feature by removing its existence
from the documentation.
Task-number: QTBUG-33091
Change-Id: I27844213e051ec7fafeb4744089a0653aea6f1f3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qdoc runs the preprocessor, so it probably skipped the definition for
this class.
Change-Id: I10933134d0c20131dd25e15bee914ebfac358b10
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
If m_window is invalid, devicePixelRatio returns 0, which leads to
adverse effects in other parts of the code. For example,
qquickshadereffectsource.cpp will get stuck in an infinite loop
trying to multiply 0 by 2.
Task-number: QTBUG-32975
Change-Id: Ie3db86f1f459df018ebce67bcb4226f6cffe854e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Prevent windows from being recreated due to screen changes which
can cause GL widgets to stop updating among other things.
EnumMonitors returns only one temporary monitor named "WinDisc"
when locked. Do not remove monitors when that happens.
Task-number: QTBUG-33062
Change-Id: Ia2247bb04b3e10f99f594245f84238b5f9044f70
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Corrected style issues pointed out in review.
Task-number: QTBUG-31801
Change-Id: Ibbc4e5f8dcd8ca129ae945b5e62b15daed47d86d
Reviewed-by: Martin Smith <martin.smith@digia.com>
This approach follows the same one used by the Cocoa event dispatcher.
Change-Id: I2813b09beae07d90477c9ca506924058ace13f34
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Change-Id: Ie9ae40e3f7e2631c461ad01b6e5a4640c0b773c9
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Change-Id: If34953b171676f0246c2fb5e60c59f59350863ec
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Now that it lives in QPlatformSupport, will be fleshed out more, and
might be used on OSX at some point in time. Still iOS specific, as
none of the iOS API usages have been ifdef'ed.
Change-Id: Ib7fde6403ef2dfef175a6f306a85d58027569a30
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We resize the render-buffer based on the CALayer of the UIView that's
backing the QPlatformWindow, so the logic in defaultFramebufferObject()
to determine if a resize is needed should be based on the relationship
between the render buffer-and the CALayer, not the render-buffer and
the QPlatformWindow.
There is still an issue of the QPlatformWindow and its UIView/CALayer
not being in sync, but that's a separate issue.
Change-Id: I84f617d07ec64fea0d027473e9720523eeae0c7a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The XCB backend runs a thread which gets events out of the XCB event
queue and feeds it to the main thread via another queue. This queue is
protected by a mutex.
However, when the event thread exits, it cleans up after itself and
frees all remaining entries in the queue. This code messed with the
event queue without acquiring the needed mutex and left behind a list
full of stale pointers.
Fix this and protect the freeing with the correct mutex and clear the event
queue afterwards.
Change-Id: Ie49cf6241b76be86d8cebbc931f7226a3f6a14e5
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Since QPlatformTheme covers all dialogs whereas QPlatformDialogHelper is
really only for the native dialogs then the SnapToDefaultButton hint is
moved as it has relevance for all dialogs
Task-number: QTBUG-32631
Change-Id: I1dce0bb4abcd4cfd39c4a199a33fc7078176ab4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On BB10, NAVIGATOR_WINDOW_INACTIVE is called before
NAVIGATOR_WINDOW_INVISIBLE, already triggering handleWindowGroupDeactivated()
Change-Id: I7d82c0220fe8dc8e87bfa2b31af6085c7d1d6cee
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
On Playbook, rendering should happen when the application is thumbnailed,
therefore we need to send a window activated event to resume rendering once
the thumbnail is restored from the minimized state.
Change-Id: I0fa5da483dc101e25f718e52859a66edfe5c66c7
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
We retain each modal NSWindow as long as its modal session is running,
and we should release it every time that modal session ends.
Task-number: QTBUG-32728
Change-Id: Ia30c9c2d15be1350e7150a0d3c2f530a2fe4f38b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This would also cause an extra paint in QQuickStyleItem, resulting
in the frame being erased for those styles not having a frame width
set (e.g., fusion and GTK).
Change-Id: I7a9371c540cd31fd9f1400a51c4ec57582996dd2
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
There wasn't any example documentation besides json.html, which doesn't
actually describe usage of the various QJson* classes.
This also makes each QJson* class page link back to json.html.
Change-Id: If5ad6493d2728df0cec7bdbbc5790f0b755f816c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This enables both modes for TalkBack,
explore-by-touch and the normal swiping mode.
It is partially inspired by the BarGraphView example
of the Google/Android Eyes-Free project.
Note that for any accessibility to work you'll need
a device with api level 16 at least.
Using reflection we should be able to dynamically pick up
the classes if we have the high enough api level.
Change-Id: I11b93bead451483782a1711434d45c8f9a35996f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The API is broken and available in individual functions.
Don't make it more complicated than necessary to implement
the interfaces for new widgets.
Change-Id: Ie408c369ef05b2b8e7ac666b25153d090fcf3aae
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Since we await giving focus to a focus object until a press
release, it also makes sense to await activating a window until
a press release, since they both have to do with focus. By doing
so, the input panel now stays open if the user selects a line edit
in one window when a line edit in another window still has focus. We
also avoid activating a window in case of a touch cancel (e.g as
a result of the user flicking or triggering a gesture).
Change-Id: Ic00c4be69c257fceb10ce2d5a81cb490ea93710f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
qdoc's \include command now works as expected.
This command is only for including a file that
contains qdoc comments that contain qdoc commands
to be processed by qdoc. The file to be included
should have the .qdocinc suffix, although qdoc
will accept any suffix now. The file must be in
one of the directories specified by the sourcedirs
variable in the qdocconf file.
Task-number: QTBUG-33046
Change-Id: I45ea08932b4218aae369469968117fb5132f764b
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
To avoid duplicate files for examples, the files
are named this way. Suppose you have an example
called mandelbrot. The example is in a subdirectory
named mandelbrot, and there is a \example command
somewhere like this:
\example mandelbrot
In this case, the mandelbrot example is in the QtCore
module. Then the name of the example page will be:
"qtcore-mandelbrot-example"
...and the names of the example files will be:
"qtcore-mandelbrot-main-cpp.html"
"qtcore-mandelbrot-mandelbrot-pro.html"
"qtcore-mandelbrot-mandelbrotwidget-cpp.html"
"qtcore-mandelbrot-mandelbrotwidget-h.html"
"qtcore-mandelbrot-renderthread-cpp.html"
"qtcore-mandelbrot-renderthread-h.html"
Task-number: QTBUG-32580
Change-Id: Ic4445fd65b679523d6d94a8b0c19289d049ef0b0
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This may happen when we have namespaces and the qualified name is used
to scope an enum.
Task-number: QTBUG-32933
Change-Id: Ic4923bbfb138387bae1e3694172661ace8342089
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After sending authentication, we need to revert all states to be able
to read the HTTP header again. Before, we would not try to read an
HTTP header after sending authentication.
Change-Id: Id4b95eda9881a37bcfbae0570756bb3e4918a568
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns.qt@gmail.com>
moc's C++ is not 100% accurate, so better process the invalid macro with
a warning rather than an error.
Such errors occurred in the QSKIP macro with variadic arguments since
that macro is defined conditionally.
It is also causing problem in boost header (cf task QTBUG-29331)
Task-number: QTBUG-29331
Change-Id: Ice6a01b675286540d6470c8e36920b7efd39b540
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
I have not located any significant behavior changes in this,
and it is annoying having too much similar code in different
branches.
The main change is a removal of Qt::AlignLeft, but
the icon Label should be in its own column.
Change-Id: Iaf07fc503075e61e2af1a93d5fc9e6e34a24451d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This patch moves some layout handling to a new function.
That will be helpful later since we can re-use the new function.
Change-Id: I4cc846f9958d9530ec2b07292093b94bd27ee055
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
They are:
3 Intel 80386 or equivalent
4 Intel 80486 or equivalent
5 Intel Pentium, Pentium MMX, AMD K6 and a few others
6 everything since the Intel Pentium Pro and AMD Athlon
By necessity, this means all 64-bit builds have a family of 6. That
matches the family number that the CPUID instruction produces.
Change-Id: I5dc7344976f8da65938f44310b89ade4fe3f1a28
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rather than trying to make it lock-free (which requires double-bookkeeping of
4 atomic ints!), just lock the mutex before calling it.
tst_bench_qthreadpool shows no difference whatsoever between the two
solutions, I get 0.005 msecs per iteration in startRunnables().
Of course looping over calls to activeThreadCount() is a bit slower,
from 0.0002 msecs per iteration to 0.00027 msecs, i.e. 35% more.
But polling activeThreadCount() from the app is a really wrong thing to
do anyway, this benchmark was just for my own curiosity about the
price of a mutex in a function that sums up 4 ints.
What matters is start() performance, which is unchanged (0.00007 msecs
is just noise compared to a 0.005 total, that's 1.4%).
Change-Id: I993444eef8bc68eff9badd581fae3626dfd1cc6d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes the wrong value for path() and fileName() when a
path or file name actually contains a '%'.
userInfo() and authority() are not individual getters, they combine
two or more fields, so full decoding isn't possible (e.g. username
containing a ':').
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
defaults to decoded mode in the getters and setters for userName,
password, host, topLevelDomain, path and fileName. This means a '%'
in one of those fields is now returned (or set) as '%' rather than "%25".
In the unlikely case where the former behavior was expected, pass PrettyDecoded
to the getter and TolerantMode to the setter.
Change-Id: Iaeecbde9c269882e79f08b29ff8c661157c41743
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling them and not using the return value makes no sense.
And it's even worse -- in autotests people might call those
functions without wrapping them in QVERIFY(), effectively
not testing anything.
Change-Id: I2c90d1c85963ff1f35f00653d536a9252c2fcc48
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In delegates we get into trouble with calling showPopup in
setEditorData (edit by double click) - and that is not reasonable.
The user has requested edit - and therefore it is natural to save
a click for the user and show the popup at once.
However that fails since we have the mouse down and as soon as we
release the mouse we will call hidePopup.
This patch ensures that the mouseReleaseEvent, that caused the
problem is only considered if we have had a mousePressEvent.
Change-Id: Ibe031fcb9ad2158f6969e41127bbb5f651b9cae6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The anonymous union isn't supported and can be replaced with a reinterpret_cast.
Change-Id: Ic76a31f36e61d910db16312d7a6c4bdc728aa825
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Layered (translucent/non-opaque) windows do not receive WM_PAINT,
expose events need to be generated. Improve
6800728d09 to handle transient
children as well.
Task-number: QTBUG-17548
Change-Id: Id113604512692dfbea1f2b10d0db3068213cf599
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The call was resulting in inifinite recursion on OSX 10.9 when Qt was
built against the 10.7 SDK, as qt_mac_get_fixed_pitch uses QFontMetrics
to resolve the pitch, and we would end up in the font resolver again
when asking for the metrics.
The CoreText font-database already takes care of resolving whether or
not a font family is fixed-pitch, so the code is likely a leftover
from the ATSUI-days, and can be removed.
Task-number: QTBUG-31803
Change-Id: I37c90fa637927eb4adc16c0fd556c4c46c456034
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When suspending the app we would destroy the surface twice,
causing libEGL to output a warning on the second attempt.
We would also destroy the surface before all references were
released which is not 100% nice. We don't need to call the
super class implementation at all, since we are managing
the EGL surface ourselves.
Change-Id: Ie1ab2ea8561d0018b5f16ac8cdf3296313a0a92c
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
It is not guaranteed that buffers are cleared when they
are allocated. So don't use a buffer for the root window,
and clear buffers for the actual content.
Change-Id: I42939baec03fa05968c83bbf2739ab8d1d70c8be
Reviewed-by: Matt Hoosier <matt.hoosier@garmin.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Currently the QDateTime::addDays/Months/Years methods copy all the
d member variables themselves, but this is bad practice as it means 3
more places where we have to get the copy code correct. Instead use
the copy constructor to do what it's meant to. This saves more changes
when we add proper OffsetFromUTC and TimeZone support.
Change-Id: Ie2641d0cb58405335206edcce2e2db30702b78bf
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The minimum SDK version supported should be set to 9, since this
is required by Qt. We also set the target SDK version to 14, since
this will remove certain compatibility features, like the overflow
button in the action bar.
Task-number: QTBUG-30860
Change-Id: Iddd0eba2e802d03c5fe6e9b5da626808bbbad71d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Previous name caused a conflict with another page with the same name.
This page will replace the one in qtdoc.
Task-number: QTBUG-32580
Change-Id: Ifda8841feaab4def6c16972a027947f75ccb7739
Reviewed-by: Martin Smith <martin.smith@digia.com>
This allows platforms to dynamically alter their keyboard
shortcuts, for example if they are user-configurable on that
platform. Current behavior remains the same.
QEvent previously used the hardcoded values in QKeySequencePrivate so
this was modified to use QKeySequence::keyBindings().
In order to keep the speed of QEvent's former binary search, we moved
this code to QPlatformTheme::keyBindings(), making it faster for all
keyBinding lookups.
As we now need to search by StandardKey instead of by shortcut the list
is reordered and a test is changed to reflect that.
Change-Id: Iefb402fbbe8768be2208ce036f3c2deed72dcc6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Currently the default for QSplitter::opaqueResize is hard coded,
which is less than ideal. Instead this should be provided as a
style hint via QStyle so as to give a more uniform look to all
applications.
Change-Id: I5711811f7b672e36aafcd292ed320308570a0390
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of loading HB face in QFreetypeFace::getFace(), defer allocation
until the first FT font engine for that face gets initialized;
then, QFreetypeFace "reparents" and manages the loaded HB face.
Change-Id: I2ac8ead4c6ed25d341af9c9cf0c34dfb979f8390
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This reverts commit aa1b4c0943.
It turns out that the bug is caused by a different mask constant
in Windows 8 which should not take effect in pre-Windows 8.
Change-Id: I1ad502262dae42856c07d48ee3bc9dc032ab379b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since it's possible to call the function on an
empty model, return failure in that case.
Change-Id: I0a0eabe917da3e6294bdd616a85579f6dc894ec8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
XI2 sends events for individual touch points, but QTouchEvent
sends all of them with a stationary state if they didn't change.
If a touch pressed event is received, and the next XI2 event
is about a different touch point, we wouldn't update the state
of the previously pressed touch point.
Change-Id: I1ebcbea1cea54872064ef7710e2aac7b0b41cd70
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
C99 defines the "I" macro in complex.h. qobjectdefs_impl.h can be
indirectly included in user code, which raises the possibility of a name
clash if the user's compiler supports C99 and the user includes
complex.h
Change-Id: Ie79ec7baf2d49a34b66a01556c7e57324303dc04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests use local coordinates, but window->geometry() gives the
global position on the window, i.e. offset by the size of the
decoration.
Change-Id: Id63ffd7e160b77ddb0f5563d8c3c65c36ad45e89
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
After change 4dbf574b7a touch worked
only if XI2_DEBUG is turned on. That is because it creates the
QTouchDevice and calls QWindowSystemInterface::registerTouchDevice,
which must be done at startup so we can receive events.
Change-Id: I9446d72bc702fbd819bf26bcdc2a3d657180f642
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We don't use exceptions anyway, so we can safely ignore this warning.
Task-number: QTBUG-32833
Change-Id: Id78cb99770f37a076de3a95721ba40795a8a7b57
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
With a _NET_WM_PING message, a window manager can check if an
application still works or if it froze. The WM sends such a message to
the application window and the application sends the message back to the
root window.
Since change Ia04268b0 / commit d8090022f "Move the X11 system tray code
from widgets into XCB-plugin.", Qt selects StructureNotifyMask on the
root window. Due to this, we now also receive replies to _NET_WM_PING
and treat them like a _NET_WM_PING request.
This caused an endless loop as soon as any _NET_WM_PING was seen where
Qt would send a _NET_WM_PING to itself and handle it again and again.
Fix this by ignoring _NET_WM_PING messages that are sent to the root
window. According to EWMH, such messages can only be replies to
_NET_WM_PING and GTK does this, too.
Task-number: QTBUG-32957
Change-Id: I1b0aa682f99b17d633baacc14b18b3adca7a1aba
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
In our benchmarks this makes removeLast more than twice as fast.
(That is on my core I7 laptop with gcc on linux).
It changes the alloc test to be an assert rather than an if.
Change-Id: Id55195b9b7880e54a89be4dd9d6228d94aff23c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We kept using qInstallMsgHandler in testlib to not break test cases using
it too. However, this breaks tests using qInstallMessageHandler ...
ChangeLog: QTestLib: Test cases have to use qInstallMessageHandler instead
of the (deprecated) qInstallMsgHandler
Task-number: QTBUG-32391
Change-Id: I3bd95d9b0a48749243a5dd3e074df8ebcbc07dce
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This patch fixes the warning uncoverd by the -Xlint:unchecked option
by parametrising the generics with wildcards.
src/org/qtproject/qt5/android/QtActivityDelegate.java:315:
warning: [unchecked] unchecked call to getMethod(String,Class<?>...) as a member of the raw type Class
Method m = initClass.getMethod("setActivity", Activity.class, Object.class);
Change-Id: I665e9dfd6d64c92a491d68c838ad02bde275d604
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Though the worst case memory usage was improved in
b800d8b94a the best case usage changed.
Since best case is the same as worst case in Qt5, we should
use as little as possible, which this patch ensures.
We reduce the memory usage from 3 to 2 ints per section - which is
half of worst case in Qt4. There seems to be no bigger cost in
performance doing that. The recalcSectionStartPos is still very fast.
This patch limits the maximum section size to (2^20) ~ 1.000.000 pixels.
This alleviates
Task-number: QTBUG-32325
Change-Id: I9b7530030a31b4e35cf1ca9e32c6b936f5ea9790
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QFontEngineMulti::stringToCMap() stores the fallback engine index
in a glyph index'es high byte, which means the maximum fallback engine index
it can store is 255, so limit the number of tries we're doing to this value.
Otherwise we could end up with `fontEngineMulti->engine(glyph >> 24) == 0`
after successful stringToCMap() call.
Task-number: QTBUG-30412
Change-Id: I06907a39186fd207f3ce4b732a1a54e615744082
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in scanning any of it.
qdoc already excludes itself (and will hopefully move out of qtbase
soon), so not adding it here.
Change-Id: I84356c0988be386de331bb7879b3ebd2108526a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
whatever it was used for is long gone.
Change-Id: Ifab7ae7968b1ab65982b1a6414274b3502bbc3d0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Optimize the parser of the X11 compose tables. Parsing these was
responsible for over 90% of the startup time in Qt 5.1.
Change-Id: Ifddc3f30828791e51a755f92791c26ffe43a9cd3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Thiago Macieira
Tobias Hunger
Oswald Buddenhagen
Thorbjørn Martsum
Konstantin Ritt
Topi Reinio
Gabriel de Dietrich
David Faure
David Faure
John Layt
Robin Burchell
Yoann Lopes
Giuseppe D'Angelo
Frederik Gladhorn
Stephen Kelly
Sean Harmer
Eskil Abrahamsen Blomfeldt
Mitch Curtis
Christian Strømme
Martin Smith
Friedemann Kleint
Christian Kandeler
Daiwei Li
Nico Vertriest
Tor Arne Vestbø
Uli Schlachter
Andy Shaw
Takumi Asaki
Rafael Roquetto
BogDan Vatra
J-P Nurmi
Richard Moe Gustavsen
Olivier Goffart
Peter Hartmann
Shawn Rutledge
Andreas Holzammer
Leonard Lee
Jerome Pasion
David Edmundson
Rohan Garg
Jocelyn Turcotte
Sze Howe Koh
Martin Jones
Jonas Gastal
Sergio Ahumada
Kai Koehne
Corentin Jabot
Ryohei Ikegami
Lars Knoll