The subpixel RGB alpha values were not converted from host endian to RGBA
order before being used as RGBA ordered.
Task-number: QTBUG-58619
Change-Id: I18e1c9df902c7e9001a0e511f06fc953dd7afa3e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Extends the short-cut of not fetching destination to also apply to
the RGB64 painting. This saves reading and converting destination pixels
when they will be fully replaced with source pixels.
Since ARGB32 was switched to using the RGB64 drawhelpers, and ARGB32 is
particularly expensive to read, this change is important to avoid
performance regression.
Change-Id: If3a2439140d6364e8429783cfa786bd000cfab45
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It is never written after initialization, and accessed concurrently
outside mutex protection, so make sure that it never changes by
marking it as const.
Change-Id: Ib28b2e8b3067d596a95d1699165a6ebfb15fe674
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Instead of relying on specific notifications to change the window
state we now evaluate the state based on the current window state.
This allows us to get rid of windowShouldZoom in the window delegate,
making window state handling work for foreign windows as well, and
also allows us to re-evaluate the state in more places, such as
when moving a window, which may bring it out of maximized state.
The full screen state is tracked by a helper category that doesn't
just rely on the styleFlag, but also on the full screen notifications.
This is needed as macOS will complain if you try to go in or out of
fullscreen while a transition is in effect.
The differentiation between performFoo: and foo: has been removed,
as the latter works in both cases and doesn't rely on the button
being visible/enabled.
These changes fixes many observed quirks in the window state handling
that also resulted in making it hard to write tests that relied on
the fullscreen/maximized operations always working.
Change-Id: I0538c42d9223a56f20ec9156f4939288e0750552
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adding 0 each time will obviously not produce a new identifier each
time...
Also use static initialization for QBasicAtomicInt.
A default-constructed static QBasicAtomicInt at function scope
will be dynamically initialized. It will still be zero-initialized,
but at least GCC adds guard variables for such objects.
When using aggregate initialization, the guard disappears.
Amends 265db5ad9b.
Change-Id: Ia71290cf26c486dcbcc74381f12cd0c4712d6019
Reviewed-by: David Faure <david.faure@kdab.com>
Use F16C or ARM FP16 if available at compile time.
Configure check added because older clang compilers have F16C defines
and flags but not all the intrinsics.
Change-Id: I71f358b8fd003e70ab8fcf35097414591e485112
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use of XInput 2 may result in regressions. For example we call
XISelectEvents for each window every time a device plugs/unplugs.
It causes significant delays when there are many native windows.
Change-Id: I60b799bb667d0e4bca1f9c52cdaa07b04bcc749f
Task-number: QTBUG-57013
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
By making the destructor (usually the first non-inline, non-pure,
virtual function, and therefore the trigger for most compilers to emit
the vtable and type_info structures for the class in that TU)
out-of-line, vtables and, more importantly, type_info structures for
the class are pinned to a single TU. This prevents false-negative
dynamic_cast and catch evaluation.
Since the classes are already exported, users of these classes are
unaffected by the change, and since it's private API, we don't need to
avoid adding code to the out-of-line destructor until Qt 6.
While at it, de-inline also the empty default implementations of
virtual (non-dtor) functions.
Task-number: QTBUG-45582
Change-Id: I3e6f37eab1dee0db445f6c13638a43ca3bf6ac62
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt::Desktop exists to support QDesktopWidget, which predates the QScreen
API. QWidget internally has checks that prevents you from reparenting a
QWidget into a QDesktopWidget, so we should have the same limitations on
the QWindow level. This allows platform plugins to implement Qt::Desktop
as simple (possibly shared) wrappers around QScreen without having to
allocate native window resources for each desktop window.
Change-Id: Ia1bac506febd3d827a6e0b8ad3bfd95be0cc7f9d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We require lambda support in the compiler since Qt 5.7, so drop
the guard macro.
Apart from MSVC 2013, all our supported compiler also support
char16_t:
- VxWorks uses GCC 4.8, which supports char16_t since 4.5.
- ICC supports char16_t since v12.1; we require v14+.
- ONX uses a GCC which supports char16_t in the compiler,
but is equipped with a stdlib that does not sport char16_t
support, which is why we revoke its Q_C_UNICODE_STRINGS in
qcompilerdetection.h. But we don't need stdlib support, we
only need the core language feature.
This is the only platform where this patch actually changes
something. It removes the, rather unfair, pessimization of
the platform which could have supported the static-storage-
duration implementation of QStringLiteral instead of the
fallback, which uses dynamic memory (QString::fromUtf8()).
- GCC and Clang support char16_t since 4.5 and 3.0, resp.,
which is far below our minimum compiler requirements in
effect since Qt 5.7.
- On Windows, MSVC supports char16_t since 2015 only, and we
still support 2013, but on Windows, wchar_t is the same size
as char16_t, so instead of u"str" we can fall back to L"str".
So simplify the implementation of QStringLiteral by assuming
that all these feature are present, adding noexcept to the
lambda to make noexcept() queries return true.
This allows us to guarantee:
[ChangeLog][QtCore] QStringLiteral is now guaranteed to be
evaluated at compile-time. The last platform (QNX) to use the
QString::fromUtf8() fallback has been ported to allocate the
string data statically, too.
Change-Id: I7920d7a77001e5c5550e7c7d57ceb7c51c9eb443
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A variable of static storage duration that is not zero-initialized
takes up space in the DATA segment of the executable. By making the
counters start at zero and adding the initial value afterwards, we
move them over to the BSS segment, which does not take up space in
the executable.
Wrap atomics used across function boundaries into small functions,
to avoid code duplication and to increase readability.
Change-Id: Ida6ed316ecb8fe20da62a9577161349e14de5aed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Systematic testing in tst_QStringApiSymmetry revealed a bug in
QStringRef::toLatin1(): a null input did not result in a null output,
but an empty one. This is fixed, for consistency with
QString::toLatin1(), and QString(Ref)::toUtf8(), which behaved
correctly already.
The same bug was found in QString(Ref)::toLocal8Bit(), which is
particularly hideous, as it's documented to fall back to toLatin1(),
which preserves null inputs. Fixed, too.
[ChangeLog][QtCore][QString] toLocal8Bit() now preserves nullness of
the input QString (outputs null QByteArray).
[ChangeLog][QtCore][QStringRef] toLocal8Bit() and toLatin1() now
preserve nullness of the input QStringRef (output null QByteArrays).
Change-Id: I7026211922c287e03d07e89edbad2987aa646e51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QDeadlineTimer will eventually support CLOCK_MONOTONIC_COARSE on Linux,
so let's be safe before that change appears.
Change-Id: I9b423f1b71194205b27afffd14a383a7e9f66a9d
Reviewed-by: Stéphane Fabry, Cutesoft <stephane.fabry@gmail.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
3e9db01a2e4be5034d10d6eeafd65d0a8609615b entered dev after the 5.8
branch.
Change-Id: I4139d5f93dcb4b429ae9fffd14a349e85e62a298
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It was unnecessary, since we only cached the static types, which are all
generated by the macro anyway. The way it was implemented, this produced
data races that are strictly-speaking UB, even if all the threads were
writing the same values to the same data locations.
This commit changes a little the code to simplify, since we're changing
those lines anyway.
Task-number: QTBUG-58851
Change-Id: Idc5061f7145940f987dffffd14a30047846e3113
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The button in the title bar is used both for going into full screen and
maximizing (zooming) the window. We can't hide/disable it unless both
Qt::WindowFullscreenButtonHint and Qt::WindowMaximizeButtonHint are
off.
This means that when Qt::WindowMaximizeButtonHint is off, it's still
going to be possible to Option-click the button to maximize the
window, but this is less of a concern than hiding the full screen
button when Qt::WindowFullscreenButtonHint is set.
Change-Id: I70dbe27b3197fe22c1781277f8bf9a818d71d04d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The previous logic relied on QPlatformWindow::setWindowState() being
synchronous and delivering the QPA event before returning to QWindow,
in which case window->windowState() would still refer to the old
state. Async platforms can now report the previous state correctly.
Change-Id: Ib9148fe23fb62be55b7e3a0ccf63d32c71dc2ad3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QPlatformWindow::screenForGeometry uses the screen where the center
of the window is, but native application use the one which intersects
with the bigger area. It might not be the same.
Change-Id: I831a5fcaea0e293e9f0f93ef5e562cce57fae2f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
GHS compiler is not fully compliant with iec559.
Therefore we need to replace is_iec559 assertion
with separate checks to build quint16.
Change-Id: I88c57e394b8d4e7899ee7d4a13cbfbac9436b2fc
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the QFileDialog receives a language change event, and native
dialogs are used, this code path dereference a nullptr in the qFileDialogUi member.
Protect by checking the return value of QFileDialogPrivate::usingWidgets() as
done in other places deferencing qFileDialogUi.
Fixes a crash in GammaRay
Change-Id: I3e9eb81c75d9fc983519a58c5ec06e316ac80263
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the QSemaphore::tryAcquire() call times out, we mustn't
touch *res, because there was no happens-before relation
established between *res = result in the lambda and our
returning *res;
Fix by returning a default-constructed hash in that case.
Add a strategic std::move().
The same problem exists in runOnAndroidThreadSync(), but
I have no idea how to solve it, because there the shared
object is the runnable itself.
Change-Id: I9a2c431144c169fbd545763555d96153143a11bf
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The code obtained an iterator into a QHash under mutex protection,
then dropped the lock, dereferenced the iterator several times and
only retook the lock to erase the element from the QHash.
This is very smelly. QHash provides no official iterator validity
guarantees, and the container isn't const, either (which would imply
thread-safety). In particular, the dereference into the container
outside the critical section is cause for concerns.
Simplify the code, removing any doubts about its race-freedom, by
taking the payload item out of the hash before dropping the lock, and
using only the local strong reference in the remainder of the
function.
The only other references to g_pendingPermissionRequests are
insertions with unique-by-construction keys in QtAndroidPrivate's
requestPermissions(), so there was no reason to keep the item in the
hash for the whole duration of the sendRequestPermissionsResult()
call.
Change-Id: I39fe0803b13b3046d1f0fd9c8e96c531406d57da
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Update the QSyntaxHighlighter examples to use the new QRegularExpression
class in place of QRegExp.
Fix typos. Remove duplicated snippet. Replace lengthy section of
duplicate text in highlight(..) with a note to see the detailed
description.
Task-number: QTBUG-58494
Change-Id: Id8d94bddbed52e6e52feac107f6fc84e2fe4518a
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Solves a data race found by TSan.
Since thread and threadId are QAtomicPointer, I've removed the explicit
initialization in the QThreadData constructor
Task-number: QTBUG-58855
Change-Id: I4139d5f93dcb4b429ae9fffd14a34082f2683f76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
1. Do not use Q_GLOBAL_STATIC to hold QAtomicInt or QMutex, use
file-static QBasicAtomicInt and QBasicMutex instead. They are
zero-initialized PODs.
2. Use only QMutexLocker to lock mutexes.
Also wrap the atomic counter into a next...() function, as done
elsewhere.
Change-Id: I4b14ac0de9d4cb6780b1f1372c2b5fc88e918e4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
$ git grep -we futexFlagSupport
src/corelib/thread/qmutex_linux.cpp:static QBasicAtomicInt futexFlagSupport = Q_BASIC_ATOMIC_INITIALIZER(-1);
The last user of this variable was removed in 9ef59b5.
Change-Id: I818a13a481ad25baa5ff7d389a737b8801adcfcc
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Call the Win32 API GetDesktopWindow() to obtain a HWND of the desktop
instead of calling QApplicationPrivate::getHWNDForWidget() for desktop
windows. This allows for lazily creating desktop platform windows.
Observed in some tests where no window is visible.
Change-Id: I97074f69606b3d74f3fbc90acb4a077d52eeb84d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Calling setScreen() on a QWindow doesn't move the window to that screen
unless the new screen is a separate virtual desktop, as the window
geometry is what determines the position of the window within each
virtual desktop.
But when mapping a QWindow that doesn't have a position explicitly set by
the user, we try to resolve a reasonable position for it. In that case we
should take the QWindow screen into account, as setting it to a non-primary
screen is a good indication that the user wants the window to end up on
that screen. If that's the case, it should override the logic of using
the transient parent or the cursor position to choose which screen to
place the window on.
Change-Id: I591d872a93913173b20eb3da19aa63118fcf6b12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We can defer the creation until the window is shown.
Change-Id: I3d5b45ae59ee0925996cf12cd46dd574c8c6ef95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since QVector is implicitly shared, don't re-generate the same
two color tables all over again, but create them once and keep
them around in a Q_GLOBAL_STATIC.
Change-Id: I9a8d32021d8cc327264f2818a23beaae67fe3ee8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
NVIDIA 370 introduced new calls needed to work with eglstreams in the
wayland window system
Task-number: QTBUG-58299
Change-Id: I606b143d3016f365b0d5ca4bc163b99289afbea1
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
All implementations of QCollator::sortKey() can benefit from
moving their CollatorKeyType into the QCollatorSortKeyPrivate
on construction.
So make the QCollatorSortKeyPrivate ctor a perfect forwarder
for its m_key member, and add std::move() calls where they
were missing (in all but one case, lvalues were passed).
Make the ctor explicit, as it should have been from the
beginning.
Change-Id: I2a1cdda5fd23990ace019b963df895c621a1fa85
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QThreadPool maintains three containers of QThreadPoolThread*:
- allThreads, a QSet
- waitingThreads, a QQueue
- expiredThreads, also a QQueue
None of the operations on allThreads make use of QSets fast lookup.
The only functions called on it are isEmpty(), count(), insert(),
and swap().
Since therefore QSet adds nothing but overhead, causes indeterminism
(e.g. when deleting threads in Private::reset()) and code bloat, use
the same container for allThreads that underlies QQueue: QList.
Port insert() to append(). Add an assert to verify that we're not
running into an ABA problem here (but this should never fire, since
we're never deleting threads except in Private::reset(), where we
do remove them from allThreads), just in case.
Saves ~0.5KiB in text size on optimized Linux AMD64 GCC 7.0 builds.
Change-Id: I53a4d5ef2c204420f7c8852f1e72ab3d6ea43d08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add proper support for 'so' and 'bundle' suffixes. Qt wrongly assumes
.so libraries are not versioned on Apple platforms, which is
wrong. Also, the shared library .bundle which is what Apple recommends
instead of .so, are also versioned (not to be confound with the
different Core Foundation bundles, which are directory hierarchy).
For more info, see http://docstore.mik.ua/orelly/unix3/mac/ch05_03.htm.
Especially the part that reads:
"Loadable modules, called bundles in Mac OS X, have the file type
MH_BUNDLE. Most Unix-based software ports usually produce bundles with a
.so extension, for the sake of consistency across platforms. Although
Apple recommends giving bundles a .bundle extension, it isn't
mandatory."
Task-number: QTBUG-50446
Change-Id: Iacd5136397a12d65d83821434f332eb602550b4b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And if __AES__ or __PCLMUL__ is defined, then we expect wmmintrin.h to
exist.
Change-Id: I445bb15619f6401494e8fffd149db77dc513e071
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Now that notification callbacks are delivered directly to QCocoaWindow,
it doesn't make sense to then send them to QPA via QNSView. By skipping
the QNSView roundtrip we also enable window state notifications for
foreign windows.
As an optimization we no longer flush all window system events, but use
the new synchronous API to deliver the window state change event.
Change-Id: I529b625fbe22e664c34a51bcd4448d1bf0392e6b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I4f7df9abcd580297a40fd9dd16a26f5f93e1c4c7
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The function is only used from inside the #ifndef ES2 blocks,
causing it to fail compilation with a default configuration
on iOS (where warnings are errors).
Change-Id: I4f76c6371bd9125c7d1c919685df4a870eeb62f0
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
We have observed that MSVC 2013 gets lost with the overloads that this
header adds, causing compilation bugs. This is believed to be a compiler
bug, but it's not something we can work around.
Task-number: QTBUG-58555
Change-Id: I536c32a88bff44dab37afffd14a1bad1d31dc16d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Glen Mabey <Glen.Mabey@swri.org>
Since 5.7, QIODevice::peek() implementation is based on transaction
mechanism. While technically it's correct, seeking backward on a
buffered random-access device clears the internal buffer that affects
the performance of reading.
To solve the problem, this patch implements peek mode directly inside
the reading procedure.
Task-number: QTBUG-56032
Change-Id: Ic5269f76e44c491a0309e13aba87fa7cf7b9259f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move device-dependent part of the code into the private function for
further reusing by peek() procedure.
Task-number: QTBUG-56032
Change-Id: Iedceafe4b0bab109ca5c64ad274d779efe87c27b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We're already using it, for example in qpaintengine_pic.cpp:502:
d->s << p << ti.text() << fnt << ti.renderFlags() << [...]
^
[ChangeLog][QtCore][QFlags] Added operator<< and operator>> for
streaming QFlags into and out of QDataStreams.
Change-Id: I33dc971f005a4848bb8ffffd1478e79d6102d1bc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
the file contains no code.
this avoids complaints from ar/ranlib in static/bootstrapped builds.
Change-Id: Iee22ffc61a5f9ea8c25f5455b7e8e017ac521624
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of merely defaulting it to off on android and windows.
this reflects actual reality.
Change-Id: I880254138bedd07124aa00096a06dd6e1803feb9
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Qt::ForeignWindow implies Qt::Window, which QtWidgets interprets as a top
level window, but this is not the case on a QtGui level. A foreign window
can be a child window as well, so we have to make sure the QWindow state
is not propagated to QWidget, which would result in the QWidget becoming
top level.
Change-Id: Ie0c2d769ce92e6988a4d62da46f5fc2da74bdf08
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Calling QWindow::destroy() is documented to "release the native platform
resources associated with this window.", but in the case of foreign windows
we do not control the native platform resource, so we shouldn't destroy
the platform window until the QWindow is destroyed.
This also allows code paths to defer to the platform window to answer
questions like winId() instead of having to duplicate the ID on the
QWindow side in _q_foreignWinId.
Change-Id: Ie00ee570bdddde958d97d49edcba2bc1bf519a99
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Simplifies code at call sites and allows for refactoring how to decide
if a window is foreign or not at a later point.
Change-Id: Icc51a83bac187f4975535366b53b4990832b6c82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since they are all used in a typical application, this reduces the
number of memory allocations (thus, the overhead) as well as the
state-keeping in the libc atexit() functions.
Change-Id: Ifaee7464122d402991b6fffd14a0e59457ad9cb7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If these lists weren't created in the first place, then they are empty.
We don't need to create it in order to conclude that. Unlike most
Q_GLOBAL_STATICS, these are almost never used and yet they were
always created due to where they were checked.
Since we're calling exists() before, there are two consequences: first,
since the list already exists, we're not allocating memory so it cannot
throw std::bad_alloc when being accessed. Second, since we've just
checked it exists, we can use QGlobalStatic's operator*(), which is
slightly faster than operator()(). The weird &(*list) syntax is only to
avoid changing the rest of the code that used a pointer
Change-Id: Ifaee7464122d402991b6fffd14a0e44f533dc3d9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
exporting the freetype dependency caused qtwayland to break with
-qt-freetype, as the helper libraries' module pri files are not
installed (for good reasons)
after f9a80e06a, no actual user of FontDatabaseSupport needs access to
the transitive dependencies anyway (one of the headers has a fontconfig
dependency, but it's not used outside the module itself), so hiding them
again is just fine.
this partially reverts ec774500f.
Task-number: QTBUG-56666
Change-Id: I9e68a7e0725a92833b856c9ffdbec61c8aa5fed2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that's where the files are actually used nowadays.
also removes an obsolete (and bogus) gui export.
Change-Id: I4551aad798acb6ce8c0abe43a2fcb8e5ac64a2d4
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
I didn't even try to understand what the old code was trying to do;
once you're told by a user that the code is wrong, you see that it is.
Fixed by just using the row as passed to takeRow() instead of trying
to do some storage-index calculations. The m_matrix indexing operator
does it all for us.
Added a test that checks that the expected field widget gets
returned. Fixed expected test data that was wrong, and just checking
that the implementation behaves as implemented, instead of as
documented.
Amends change 8fbae648db.
[ChangeLog][QtWidget][QFormLayout] The functions takeRow() and
removeRow(), new in 5.8.0, now take and remove the correct row.
Task-number: QTBUG-58693
Task-number: QTBUG-15990
Change-Id: I7185ccbc6c03e2579741cad5c0c821d3ed165474
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Seems to be a write-only variable and QThread::currentThreadId has no
side-effects.
Change-Id: Ifaee7464122d402991b6fffd14a0c8666968dfe4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Give QCollator access to QLocalePrivate::bcp47Name(), to avoid
both the latin-1 -> UTF-16 conversion in QLocale::bcp47Name(),
as well all as
- the replace('-', '_').toLatin1() call in ICU
- the toLocal8Bit() call in macOS
- the toUtf8() call in Windows
implementations of QCollatorPrivate::init().
This is safe, since, according to https://tools.ietf.org/html/bcp47,
a BCP47 name only contains US-ASCII (ALPHA used, which is defined by
https://tools.ietf.org/html/rfc5234 to be [a-zA-Z] only).
Change-Id: Id56befb1b5a7983494d848cdabf7ebeda377cf9f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When a non-QString-backed mode (via the (QChar*, int) ctor) was added
for Qt 4.5, the author forgot to adjust the setCaseSensitivity()
function. It still uses q_pattern instead of (p.uc, p.len) as the
pattern for which to create the skip-table. Since there is no
setPattern() overload for this mode, the correctness of the matcher is
not harmed by this, but its performance degrades to that of a linear
scan: the skip-table, being filled from an empty pattern, will be
all-zeros, sending bm_find() into the 'possible match' case at every
character.
Since matching is still correct, but slow, it's not possible to write
a test for this. I did, however, leave my attempts in the auto-test,
for when we add QStringView overloads of setPattern() which will then
be able to expose the bug.
Change-Id: I7b803e8624b0352a0a974900affbbfc0c260d93b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The intention when using an overload that takes (const QChar*, int)
instead of a QString is probably to avoid creating a QString in the
first place. If the implementation stabbs the user in the back by
internally creating a QString just so it can call QString::compare()
on it, then that is rather unacceptable.
QCollator is already a friend of QString, so, absent QStringView,
resolve to calling compare_helper().
Change-Id: Ia7de1a095e3e310bd1b9957ed67291cc9cc95b32
Reviewed-by: David Faure <david.faure@kdab.com>
In fafdb171e0 a potential nullptr deref
was fixed, but it changed the hierarchy of accessible objects.
The new hierarchy would prefer to send a parent object that represents
the application, but macOS needs the window to be in the hierarchy for
VoiceOver to behave as expected.
Tweak it so that we give the window as parent again, not the app.
Change-Id: I5f7f59b07d0966c8bcf96968e4ed65eba9e05be6
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This looks like an underlying issue in the model/view implementation
which relies on accessible interfaces that are not representing a qobject.
We know it's not perfect and needs fixing, but for now at least don't crash.
[ChangeLog][macOS][Accessibility] A common crash in accessibility on macOS was fixed.
See QTBUG-39008
Task-number: QTBUG-39008
Task-number: QTBUG-54776
Task-number: QTBUG-56043
Task-number: QTBUG-57146
Change-Id: I16b161914d4bc3cbc0beee37d468243bf7788d1e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
- No such parameter 'image' in QImage::toCGImage()
- Can't link to 'toNSImage()
Change-Id: Ida559fb1211d1e196d9a9a50d97566124e82eb2f
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
The key is immutable except for assignment and swap,
so don't run the risk of auto-detaching and use the
explicit-detach version of QSharedDataPointer.
Change-Id: Ib2cfe5981e6dfe375d6208289ff58247ef9d4870
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... by not creating three temporary QVectors just to concatenate them.
There's no QVectorBuilder, so what works well with QStrings doesn't
work well at all with QVectors. The chaining of op+ causes three
temporary QVectors to be created and thrown away.
Instead, use clear() (which preserves the vector's capacity these days),
followed by four op+=.
Change-Id: I300bd35544ea41037d28db0f48f210c33c826b85
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
The setData method of an item view would get an incorrect value of a
QDialog's result. This patch changes the order of functions called to
fix that.
[ChangeLog][QtWidgets][QDialog] Fixed a bug where accessing the result
of QDialog's result could yield an incorrect value in some situation
like using it as a delegate for item views.
Task-number: QTBUG-6018
Task-number: QTBUG-12156
Task-number: QTBUG-14430
Change-Id: I6ee4b6e8cacf6a806631c05c6c5dbcff925df65e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Clang 3.8's undefined-behavior sanitizer checks that the
declared type of the object is a base class of the
dynamic type of the object on each access to a member
of a class type.
It therefore requires the typeinfo for these types,
which for polymorphic types is emitted in the TU where
the vtable is emitted, too.
QDBusConnectionPrivate is a polymorphic non-exported class,
so this failed at link-time. Ditto for the other case.
Fix by autotest-exporting the classes.
Also, where applicable, de-inline the dtors, so the
vtable (and typeinfo) are pinned to one TU, and the
ctor, just because it's the correct thing to do.
Change-Id: I991f81f88d2a48e85d94d9f3ac61473c0b7056d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the default dpi of 100 to calculate physical size of the display,
if KMS output returns 0 as the size and the size was not set via
environment variable.
Change-Id: If310592b2694a46d2fab464b21ec1765a5033933
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Fix warnings:
src/network/access/qhstspolicy.cpp:158: warning: Undocumented parameter 'expiry' in QHstsPolicy::setExpiry()
src/network/access/qhstspolicy.cpp:178: warning: Undocumented parameter 'include' in QHstsPolicy::setIncludesSubDomains()
src/network/access/qhstspolicy.cpp:178: warning: Can't link to 'includeSubdomains()'
src/widgets/kernel/qsizepolicy.cpp:402: warning: Cannot find 'transposed(...)' in '\fn' QSizePolicy QSizePolicy::transposed()
src/widgets/kernel/qsizepolicy.h:165: warning: No documentation for 'QSizePolicy::transposed()'
src/widgets/util/qundostack.cpp:164: warning: Undocumented parameter 'obsolete' in QUndoCommand::setObsolete()
Fix the signature of the QStaticByteArrayMatcher member functions. The warnings
src/corelib/tools/qbytearraymatcher.cpp:372: warning: Cannot find 'indexIn(...)' in '\fn' QStaticByteArrayMatcher::indexIn(const char *haystack, int hlen, int from)
src/corelib/tools/qbytearraymatcher.cpp:382: warning: Cannot find 'indexIn(...)' in '\fn' QStaticByteArrayMatcher::indexIn(const QByteArray &haystack, int from)
remain, though since apparently qdoc is thrown off by the constructor.
Change-Id: I157359a881ff3fbc80d2eeb52dd5c27249d009c4
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove the line setting the DPR from the source; the image
is moved.
Task-number: QTBUG-58653
Task-number: QTBUG-58645
Change-Id: I2de94681459dba1d69dee06da44617fb9fa35bcc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It's better to save icons in $XDG_RUNTIME_DIR or
$XDG_CACHE_HOME paths than in $TMPDIR as these
places are readable from the desktop environment
when an app is ran confined in a sandbox (as in
snap packages)
Change-Id: I1a3e4c5714f8ea51034d18fb87cead87ed21d6be
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
As explained in
https://blogs.kde.org/2009/03/26/how-crash-almost-every-qtkde-application-and-how-fix-it-0
creating dialogs on the stack is a bad idea if the
application or the dialog's parent window can be closed
by means other than user interaction (such as a timer or
an IPC call). Since we cannot know whether Qt is used to
build such an application, we must assume it is, create
the dialog on the heap, and monitor its lifetime with a
QPointer.
Instead of using manual resource management, add a
minimal implementation of QAutoPointer, and use that in
all static get*() functions.
Task-number: QTBUG-54693
Change-Id: I6157dca18608e02be1ea2c2defbc31641defc9d1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Clang complained about a missing override:
qgtk3menu.h:58:14: error: 'tag' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
Change-Id: I681cdeb93d35848ae39c1af289973b436e8ea60e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is private API, and used nowhere else except in qcollator*,
so don't export these classes.
Change-Id: I217fde97c60ab0a3e19774ed5a6eed8b156fff1d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a QFile object is reused, the atEnd() method may return incorrect
values. The reason for this is that QFileDevicePrivate::cachedSize is
not cleared. Setting cachedSize = 0 in the close() method fixes this issue.
Task-number: QTBUG-57698
Change-Id: I828a2cf844e98d581098f2c781fa47d2cd3275ce
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QDateTimeEdit (QtWidgets) inherits its Private class from
QDateTimeParser.
By making the destructor (usually the first non-inline, non-pure,
virtual function, and therefore the trigger for most compilers to
emit the vtable and type_info structures for the class in that TU)
out-of-line, vtables and, more importantly, type_info structures for
the class are pinned to a single TU. This prevents false negative
dynamic_cast and catch evaluation.
Since the class is already exported, users of these classes are
unaffected by the change, and since it's private API, we don't need
to avoid adding code to the out-of-line destructor until Qt 6.
Task-number: QTBUG-45582
Change-Id: Id57289a7eff13564dddeca0af1c45a6180c36c48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the QtConcurrent code snippets to use the new QRegularExpression
class in place of the deprecated QRegExp.
Change-Id: I1366f902fc46bbeccc4013dd8adcf5fbfda13aed
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
... to make user code buildable with gcc [-Werror=zero-as-null-pointer-constant].
Change-Id: Ifef52e406c1f7d5a260612ec27922d1805aea6e2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Document version updated in commit
f4ac14944d as 1.4.1.
Change-Id: Ia890158d2e9b5d5dccea9a56342d0261dd0210cb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Implements a generic version of alphamapblit and alphargbblit so we can have
gamma-corrected blending of text outside of only RGB32 formats.
Change-Id: Ide960276357546558dd713aab66d2af0f2a09a2a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
On macOS, the code that read the plist is using
QByteArray::fromRawCFData. When we return the data directly
we need to detach the QByteArray so that it does not point
CFData's data that will get deallocated just after the call.
Task-number: QTBUG-58531
Change-Id: If829a304b986c99c8fc2aeeb992f2d539a4eef3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a black font is used, such as Arial Black, it would cause
the font to appear to be rendered twice, particularly at large
point sizes. This is down to the synthesizing of the bold
aspect, however since the font is actually weighted as black
this is not required.
Change-Id: Ie32e0da8bc67c94123631253854312ed5c25ad9f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Allan Sandfeld Jensen
Marc Mutz
Tor Arne Vestbø
Alexander Volkov
Dmitry Shachnev
Thiago Macieira
Frederik Schwarzer
Samuel Gaist
Olivier Goffart
Kimmo Ollila
Kevin Funk
Aaron Linville
Heikki Haveri
Friedemann Kleint
Jesus Fernandez
Liang Qi
Nico Vertriest
Oswald Buddenhagen
Dominik Holland
Filipe Azevedo
Laszlo Agocs
Eskil Abrahamsen Blomfeldt
Alex Trotsenko
Andy Nichols
Frederik Gladhorn
Vyacheslav Koscheev
Samuli Piippo
Marco Trevisan (Treviño)
Aleksey Lysenko
Kai Koehne
Thierry Bastian
Andy Shaw