Saving strings with embedded zero-bytes (\0) as CFStrings would
sometimes fail, and only write the part of the string leading
up to the first zero-byte, instead of all the way to the final
zero-terminator. This bug was revealed by the code-path that
falls back to storing e.g. QTime as strings, via the helper
method QSettingsPrivate::variantToString().
We now use the same approach as on platforms such as Windows
and WinRT, where the string produced by variantToString() is
checked for null-bytes, and if so, stored using a binary
representation instead of as a string. For our case that
means we fall back to CFData when detecting the null-byte.
To separate strings from regular byte arrays, new logic has
been added to variantToString() that wraps the null-byte
strings in @String(). That way we can implement a fast-path
when converting back from CFData, that doesn't go via the
slow and lossy conversion via UTF8, and the resulting QVariant
will be of type QVariant::ByteArray. The reason for using
UTF-8 as the binary representation of the string is that
in the case of storing a QByteArray("@foo") we need to
still be able to convert it back to the same byte array,
which doesn't work if the on-disk format is UTF-16.
Task-number: QTBUG-56124
Change-Id: Iab2f71cf96cf3225de48dc5e71870d74b6dde1e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch initializes a local GLuint that gets
checked after an if() chain that assigns it but
does not match all cases.
Change-Id: I132c26fa944f11c7b77131906ff8143a7b57c10f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In case a project uses C++/CX extensions via /ZW compile flag including
qfunctions_winrt.h resulted in a compile error about duplicate
definition of Started due to namespace usages.
Change-Id: I8913522eafbabae77dd7d17187f202e555b0275f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
If len == 0, we didn't write anything to 'tmp', but get_hex_rgb()
unconditionally reads tmp[0] (aliased to name[0] in get_hex_rgb()).
Fix by terminating the tmp array, thus ensuring that the comparison
against '#' in get_hex_rgb() fails.
Introduced in a41393d0bc.
Coverity-Id: 171477
Change-Id: I53952aff7035813ed6abc74d402953bc9cfa76f1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Instead of the manual logic for computing test data locations, we use the
locations from baseWritableLocation, but make sure to put them all under
'.qttest' in the home directory. This approach handles more cases for test
data, and also plays nice with locations that are not in the home directory
due to being containerized (and hence do not need a separate test data scope).
Change-Id: Iea4f21acb75c0191be35a3619c05143e8929bd6e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A fair amount of tests are skipped if we can't write to the system scope,
eg on iOS. Without this detection they will fail.
Change-Id: I8257f1f24e69dae88925c20d2bff851e81701405
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
it does not appear that the tests actually use these flags in any way;
they don't include any (actual) d-bus headers and have no ifdefs.
and the qdbus module already pulls in the flags via QMAKE_USE (in the
case where they are defined at all, i.e., dbus-linked).
Change-Id: Ie6bc6da7d1dd96da7b73f2d0fe45576936715874
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the gl_integrations_plugin_base.pri included by this file already does
it.
Change-Id: I172401a431081da903b82e97829c2517ef6204df
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
amends 26a05fc09 (which in turn was a cleanup of 38abd6537).
Change-Id: I6159a3cfe468db048faf1c396143dd3869f7e72b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
there is no point in testing !win32 explicitly any more, as configure
will take this into account already.
Change-Id: Idfca46feece6451509b405a4afc2b7205667c5bb
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
convert the ugly config.tests/[...]/freetype.pri file into a custom
callback in configure.pri, and reinstate pkg-config use for freetype.
subsequently, use QMAKE_USE for the actual library references.
this fixes in particular cross-builds, as the new configure was not
passing the necessary information to the test any more, so the old .pri
file misbehaved.
Task-number: QTBUG-54911
Change-Id: I5fc9c254334a2675f7db4d54df4c77637e8e2487
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
it's now possible to declare references which don't cause linking (or
cause only linking).
make use of this in the xcb-static library.
Change-Id: Ic429e0a1200b3a333738ea8d8e576ff64b6cac21
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes it possible for features added via CONFIG to use QMAKE_USE*,
as default_post.prf is processed before all features in CONFIG.
Change-Id: Id0812a0fb1aa5e658548bd2bc6003234085545e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since QCocoaEventDispatcher::processEvents() resets the interrupt
state, this may prevent a higher level event loop from returning.
For example, calling QMenu::exec() and, as a result of an action
being triggered, the application calls QCoreApplication::processEvents()
after QMenu::hideEvent(). In this case, the menu event loop can be
stuck until we run another event loop.
Task-number: QTBUG-53947
Change-Id: If7efe1c3c07f7222c695195cbb4f41715e49b02e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Wayne Arnold <wayne.arnold@autodesk.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The "args" variable would contain the original -spec XXX flags in
addition to the -spec macx-xcode passed in the system command invocation
below. The last use of -spec takes effect, so this code was entirely
ineffective. Consequently, uikit/default_post.prf in the nested qmake
call thought it's still the top-level call and thus added xcodebuild
again, which caused an infinite recursion.
Change-Id: Ie98d8a7f3c1cd875f4a4146af9a66a66b48cc6cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In setData(), the old code both called Private::addNode(),
which creates a QFileSystemNode and adds it to the parent's
QHash of children, and also re-purposed the old node by
taking it out of the children hash, adjusting the fileName
member of the node and putting it back into the children
hash under the new name, where it would overwrite the node
just added under the same (new) name in addNode(). Since
the hash stores naked pointers, no-one deletes the node
that was put into the hash first.
Fix by dropping the addNode() call completely.
Change-Id: I0c37917fd0ffd74716393786c69b5bb172aa372e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The layout isn't actually created until endLayout() or setLineWidth() is
called. So in the case where this was not done, the height of the line
would be 0, thus multiple lines would be placed on top of each other, at
y == 0.
[ChangeLog][QtGui][Text] Fixed QStaticText when manually breaking lines
and no text width was set.
Task-number: QTBUG-56346
Change-Id: I7f6ed6260545882f05fe39b21134315eca7401b9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
To correct following type of error message:
Cannot find 'isValidPartOfObjectPath(...)' in \fn ....
Change-Id: I25850c69307511dc9a24a0c937fd219d4d3cb084
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
Fixes the mapping of the rare multimedia Print key, adds the real
mapping of the Print Screen key.
Also adds a mapping for few other short-cut keys that were added in 5.6
Change-Id: I931bf1eed062536e1be2aa6aa6f19d773bb5ec55
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
this is, in fact, not the same as --proxies=system, and the old
configure handles this by putting special cases before the catch-all
patterns. we achieve this by trying the verbatim names (of all options,
which is admittedly a tad inefficient) before applying the -qt/-system
transformation.
Change-Id: Ic85a9d76d6e8ca95b2e1b5566f047f4b7ac38b98
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- generic --* options are defined to be booleans, without the
possibility of having an additional parameter
- -qt and -system options don't exist in the --* form
- --foo=bar options exist only in the --* form
Task-number: QTBUG-55610
Change-Id: Ib0480ac6f479df48045c9de8e854a525862ee363
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
every repo's .qmake.conf is expected to do it already.
Change-Id: I87ed75d80493d8f1c4548c5b9dadfdaf07b86d7e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a relic from the early times of the modularization.
Change-Id: I9ca46fa6457bf9ca207b6be1f0637f0349569ddf
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this actually fixes the build when ssl is not enabled, as the openssl
features are in the not included network-private module.
Change-Id: Ibafae9867af493da184a45cf3981628d475d37a6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
now that the bat file is responsible for displaying the help in addition
to bootstrapping configure, the exe file should not shadow it any more.
amends c027cffbe.
Change-Id: I5c8a52f59ff455575e646fae55cd214db98a3736
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The QFileInfo 'info' is only used in code conditional on
QT_NO_FILESYSTEMWATCHER, so move the definiton into the
conditionally-compiled block, too.
Turn it into an rvalue while at it.
Change-Id: I9983bfdcd0b32d0abecf7c588973a60df9de8cbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For dllexport, the signatures has to match. We therefore must add the
missing inline keyword.
This is now similar to how e.g. qsize.h does it.
Change-Id: I4de227c7ae8522d5b36a4d9200953cf364eb03d4
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It fails on iOS as well, and likely also tvOS and watchOS.
Change-Id: Idfce98a5aeccb5680f6b4c6e66b526dd7922156d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
They don't modify "this", so they should be const. Mark
the existing non-const overloads for removal in Qt 6.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree now have const overloads.
Change-Id: If9fb15692d2d1536930f86d043d688236d4b778a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Turn the list of newRow() calls into a for loop over a constexpr
data structure.
Fixes the GCC note:
tst_qgraphicsview_2.cpp:47:13: note: variable tracking size limit exceeded with -fvar-tracking-assignments, retrying without
and speeds up compilation of the file from 13s to 2.5s on my
machine.
Task-number: QTBUG-38890
Change-Id: I4f0b3565c7df64b286d1d32eb3f3d6bf4df92609
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The old code is broken because it was passing signal.outputArgs as inputArgs
variable of writeArgList, fix can not be passing signal.outputArgs as outputArgs
of writeArgList since that ignores the first of the list, so i added a new function
that does the right thing
Change-Id: If54484e04880d5dcebfedb9d478ee0e9faf37baa
Task-number: QTBUG-21577
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Re-apply change 6e850af09d,
the code for which has gone missing.
This prevents sending tablet events as both mouse
and tablet events, which confuses the double-click
detection code in QGuiApplication::processMouseEvent()
when tablet->mouse event synthesis is enabled.
Task-number: QTBUG-54399
Task-number: QTBUG-51617
Task-number: QTBUG-47007
Change-Id: I6183906d4ce2b8cdc617d34e22a9dcf999eef51d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Added the binary compatibility test data files for Qt 5.7 for QtBase
Change-Id: I5b19571f5e266c52622027d820062afa5fd4fbf3
Reviewed-by: Sergio Ahumada <sahumada@texla.cl>
CFAbsoluteTime is measured in seconds, represented by a double,
so when converting milliseconds to CFAbsoluteTime we may get a
slight error due to missing precision in double to represent
the milliseconds exactly. By rounding to the closest millisecond
when converting back, we avoid truncating and being one ms off.
Change-Id: If1e99f97b000fb8cb893ddfc5d7ba81096c0ea88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
In tst_QCompleter, two completers were leaked because they
had no parent and setCompleter() calls don't reparent.
Fixed by giving them parents.
In tst_QUndo*, fix lots of leaked QActions by storing them
in a QScopedPointer. There were some half-hearted attempts
to clean them up with manual deletes, but I ported these to
scoped pointers, too, to make the code more robust in the
face of failures.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/widgets/util.
Change-Id: Icc5248cc9cf4514540915924df1c4d9e09c071fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QXcbClipboard failed to delete the various QMimeData instances
it owns.
For m_xClipboard, where the two QXcbClipboardMime instances are
never the same, fix the leak by using a scoped instead of a
naked pointer.
For m_clientClipboard, where the two QMimeData could be identical
objects, keep the naked pointers, but delete the objects manually
in the QXcbClipboard destructor, paying attention to the case
where they're the same object.
Change-Id: I5ce0e3e8fcec068aeb344ca806cdf2667378e946
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It unifies handling of QByteArray's size limit in read(), readLine()
and will be used in a follow-up change which optimizes the performance
of QIODevice::peek() function.
Change-Id: Idb9fbbe14d9632ee267d2a0e47c8a88603c024a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As already done by the iOS, Mir, and Haiku platform plugins.
Change-Id: I449f396dbf234e27206625b178c7d20e3f5b956f
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The order in which exclusive builds are added affects the order of
values in SUBTARGETS. xcodebuild.mk parses the value of SUBTARGETS in
the Makefile and selects the first entry, which would always be
release-iphonesimulator regardless of the build type. This obviously
caused -sdk iphoneos builds to fail.
This patch switches the order of in which exclusive builds are added so
that the entries which are not present in a particular build type are
always added last.
Change-Id: I306d6f7430c1dff3d741a8c5182b7af81d000e7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Liang Qi
Frederik Schwarzer
Tor Arne Vestbø
Laszlo Agocs
Maurice Kalinowski
Marc Mutz
Sergio Martins
Oswald Buddenhagen
Gabriel de Dietrich
Jake Petroules
Peter Varga
Eskil Abrahamsen Blomfeldt
Nico Vertriest
Allan Sandfeld Jensen
Jan Arve Saether
Giuseppe D'Angelo
Albert Astals Cid
Morten Johan Sørvig
Milla Pohjanheimo
Anton Kudryavtsev
Alex Trotsenko