Remove dead code
Make logic to position test widgets more consistent across test functions
Consistent cursor positioning logic
Get rid of unnecessary event processing
Reduce calls to qWait with hard coded values
Use qWaitFor to establish asynchronous preconditions
Ignore expected warning messages
Expect-fail (instead of blacklist or skip) some tests that always fail
Ignore unpredictable events in childEvents test
Split large "render" test in multiple test functions
Task-number: QTBUG-52974
Task-number: QTBUG-26424
Change-Id: I206e114c2c1d9801e08600d3341c2738dc881f17
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QWidget::setParent might be called to change the window flags, without
changing the parent. For those cases, we don't have to clear the focus.
Decouple the newParent state from the wasCreated flag. In most places
where newParent was tested, wasCreated was either tested previously and
can't be false anyway, or the code executed is irrelevant for widgets
that are not yet created (there can't be a paint manager). In the
remaining case, test wasCreated explicitly to maintain existing logic.
Add test for the cases where the previous code broke the focus, both
for QWidget and QDialog.
Fixes: QTBUG-93005
Pick-to: 6.2
Change-Id: I39dc179c2d348054de3927aa8b69eecef4935511
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The Cocoa QPA plugin no longer tracks popups, but dispatches enter/leave
events when popups show and hide. So the special handling in tests and
QWidgetWindow can go away now.
Change-Id: Ib6ef00689de231996e5e57ecdd8fd0d4c861d68b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since macOS doesn't give us any event when a modal window opens,
we need to do so ourselves explicitly so that the current mouse
window gets a leave event when e.g. a popup opens, and an enter
event when the popup closes again. The case for modal dialogs is
partially handled by QGuiApplication already.
Note: We cannot rely on the transientParent of the opening/closing
window, as it's nullptr for QMenu windows even if the QMenu has
a widget parent.
Add a test for enter/leave events when a secondary window opens,
covering both the dialog and the popup case. For the dialog case,
we sometimes get two Enter events when the dailog closes, which
we have to tolerate for now.
To make the test pass on b2qt platforms, fix the offscreen plugin
to explicitly send enter/leave events in the same way as Cocoa
now does.
Fixes: QTBUG-78970
Pick-to: 6.2
Change-Id: If45e43e625e8362c3502c740154f6a6a8962b9e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test passes consistently in local test runs on macOS 10.15.
Change-Id: I6f05b27d3cbf930475a435c41db267a00b1726b0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Move the status setting and resetting back into handleClose so that we
don't end up with it being set if handleClose is never called in response
to a close attempt. This can happen when QWindow's platform window has
already been destroyed.
Since QWindow::close handles that case gracefully and returns true,
we can safely call it multiple times.
Add test coverage to verify that we get exactly those close event
calls that we want.
Change-Id: Ica77bf17c26d923c3b79b1e5a688addbc88a6277
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also when closed by destruction, which as of today doesn't call
QWidget::close and therefore also not QWindow::close.
Pick-to: 6.2
Change-Id: I426255e2274eae9262243c769df2264fbaa915b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The plan for QObject::connect() (perfect) forwarders, such as
QWidget::addAction(), was to just use a variant of the Detection Idiom
to see whether QObject::connect() with the arguments as given would
compile and SFINAE out the forwarder otherwise.
It turns out that the "functor" overload of QObject::connect(), in
particular, is severly underconstrained and accepts e.g. QKeySequence
as a function object, only erroring out via a static_assert() in the
body of the function, and thus at instantiation time and not, as
needed, at overload resolution time.
At the same time, we don't really want QObject::connect() to SFINAE
out on argument mismatches between signal and slot, because the
resulting error messages would be ... unkind to users of the API. We
would like to keep the static_assert()s for easier error reporting.
Reconciling these two contradicting requirements has so far eluded
this author, so for now, to unblock progress, we explicitly black-
and, in one case, white-list possible arguments. Because QKeySequence,
in particular, is implicitly constructible from int(!), and therefore
any enum type(!), incl. Qt::ConnectionType, we need to do way too much
coding in the addAction() constraints. Hopefully, we'll be able to fix
the issue at the root cause, in QObject, before Qt 6.3 is out, but
until then, this is an ok-ish stop-gap measure.
Add thorough overload set checks (positive ones only, for now) to
tst_qwidget and tst_qmenu.
Change-Id: Ia05233df818bc82ecc924fc44c1b349af41cbbf1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Changing anything on a QWindow's QSurfaceFormat has zero and null
effects once the underlying native window has been created. Letting
QWidget update the format is wrong in this case, because we always
expect that the value returned from QWindow::format() reflects
reality.
(reality being the settings with which the underlying native resource
was created, which is typically frozen after QWindow::create(), not
the state of some QWidget attribute. There are certain exceptions to
this, such as when preparing to recreate the underlying native window,
in which case one will want to update all relevant fields of the
format based on the current values of the widget attributes, which is
exactly what QWidgetPrivate::create() implements, and that's good.)
Such a mismatch can have fatal consequences when OpenGL and friends
are involved, but this always depends heavily on the platform and
windowing system. For example, claiming that the alpha buffer size is
0 when the native window was created with 8, or vice versa, can break
OpenGL-related code (both in Qt itself and in applications), that
tries to create a QOpengGLContext configured based on what
QWindow::format() returns. If that format describes settings that are
incompatible with the actual underlying native window, we end up with
the classic Invalid pixel format, EGL_BAD_MATCH, and alike errors.
This is exactly what is happening when a QOpenGLWidget (or
QQuickWidget) is placed in a QDockWidget where one of the ancestors is
forced to native (winId() was called or WA_NativeWindow was set). When
undocking, various code paths in QWidget will try to update the opaque
flag of the widget, which in turn calls updateIsTranslucent. Now, if
this function unconditionally changes the alphaBufferSize in the
QWindow's QSurfaceFormat (even though this is completely futile to do,
it has no visible effect in practice), we get the problem described
above: rendering breaking down due to OpenGL contexts created with a
pixel format incompatible with the native window.
Prevent all this by not touching the format once the QWindow has a
QPlatformWindow. This is the right thing to do, regardless of the bug
in question: a window's (or context's or any other native resource
wrapping class's) format must describe the underlying native resource
and must never deviate, unless we are preparing to create a new native
resource underneath.
When it comes to the autotest, this changes the test added in
555661b625c40f21a6a3e4c73e928a6e8a46db20: the autotest logic is
inverted because what we should test for is that the QSurfaceFormat
stays untouched once the application makes a - futile - attribute
change on the widget.
Fixes: QTBUG-85714
Pick-to: 6.2 6.1
Change-Id: I7bf90711867e8a0fd474895625bf9530a7821fd5
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Several tests failed due to side effects of client side
decorations. We explicitly disable this when initializing
the test to make things go smoother.
In addition, the setToolTip() test tries to set the mouse
cursor position programmatically, which is not possible
on Wayland.
And finally, the qWaitForWindowActive() falls back to
qWaitForWindowExposed() on platforms where explicit window
activation is not supported. This fixes a few issues, but
in cases like focusProxy(), it means we aren't actually
waiting for the WindowActivation event. Instead of testing
for exposed twice on such platforms (Wayland), we replicate
the logic from qWaitForWindowActive() instead and rely on
automatic window activation. If it fails, we do a QSKIP, so
this shouldn't cause any flaky test failures at least.
Task-number: QTBUG-91418
Change-Id: I767c881e7cdc91f43ad357294a2c6240ab1af43c
Reviewed-by: Liang Qi <liang.qi@qt.io>
setTabOrder was not considering the case, when a child widget has
its focus proxy set to its parent widget. This happens, for example,
for the QLineEdit that is nested inside the QAbstractSpinBox.
For such cases the lastFocusChild was calculated incorrectly, and, as
a result, such child widgets were not correctly positioned in the
focus chain. This could lead to an error while backtabbing.
Here is a brief example. Suppose we have 3 widgets arranged like this:
auto spinBoxOne = new QDoubleSpinBox;
auto spinBoxTwo = new QDoubleSpinBox;
auto button = new QPushButton;
Then the default widget focus order is:
- spinBoxOne
- lineedit (from spinBoxOne)
- spinBoxTwo
- lineedit (from spinBoxTwo)
- button
Before this commit setting the explicit tab order changed the focus
order in the following way:
QWidget::setTabOrder(spinBoxOne, spinBoxTwo);
QWidget::setTabOrder(spinBoxTwo, button);
- spinBoxOne
- spinBoxTwo
- button
- lineedit (from spinBoxOne)
- lineedit (from spinBoxTwo)
In this case, backtabbing from spinBoxOne actually leads us to
lineedit (from spinBoxTwo), which refers to spinBoxTwo.
And so we're stuck in a loop.
This commit fixes the issue by handling such special case, and
preserving correct focus order.
Note: the actual unit-test in this patch uses QLineEdit instead of
QPushButton, because one can't tab to buttons on macOS by default.
However the general idea is the same.
Pick-to: 6.0 5.15
Fixes: QTBUG-81097
Change-Id: I5d16da7733a4d63f809cab28b8ca9e116b87cffa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is a source incompatible change for widget implementors.
Leaving the old enterEvent as a virtual overload is problematic due to
shadowing. Best to make a clean cut, widget reimplementors will get a compile
time warning if they mark their override as such, or if they try to call the
parent class implementation.
Addresses ### Qt 6 comment.
[ChangeLog][QtWidgets][QWidget] The virtual enterEvent handler now receives
a QEnterEvent, which contains information about mouse position and button
states, rather than a plain QEvent.
Change-Id: I233f594fd79c0c090983b3db8532913d00132fde
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Follows the QWindow semantics, and is a replacement for creating
a QWidget with a QDesktopScreenWidget as the parent.
We can now remove much of the special handling of QDesktopWidget and
the Qt::Desktop window type, and get rid of QDesktopScreenWidget.
Add a manual test that allows local testing. Our CI environments
only have a single screen, and no multi-head display server setup
which is the primary case where QWidget::setScreen is interesting.
For the more common case of a virtual desktop, QWidget::setScreen
has no real impact (just as QWindow::setScreen doesn't).
Change-Id: Id0099e069d316741bacd8c795c396ccad37be297
Fixes: QTBUG-85483
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A QWindow should only become Active when it's inside an
NSWindow that is Key. If the NSWindow is not key, we need
to wait for it to be so, and handle window activation
from QCocoaWindow::windowDidBecomeKey() instead. Otherwise
Qt will report a QWindow as Active when, in reality, it
is not.
Change-Id: Ib7e63b374f26af527a668c7f7d863c4168a4446d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes regression introduced in b4981f9d4c,
due to which it was possible to back-tab into a widget even though it or
its focusProxy had a NoFocus policy.
As a drive-by, split the complicated if-statement up a bit for improved
readability.
Change-Id: Ib0ac2604076e812e340b11534c23ae8ae958d082
Fixes: QTBUG-76924
Pick-to: 5.15 5.12
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Starting from Qt 5.11 QWindow::event is called after QDialog::closeEvent
which would cause a crash if "delete this" was called on closeEvent. The commit
that changed this was e0b5ff4ad5. Added
a check before QWindow::event call utilizing QPointer to prevent the
function call in case object is destroyed by a user in close event handler.
Change-Id: I64a4a0f3271714e55bf7e806177f0d8b39b67fa3
Fixes: QTBUG-84222
Pick-to: 5.15 5.12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Rather than have a paletteChanged() signal which can be connected to for
tracking when the application palette has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated paletteChanged() signal
in favor of QEvent::ApplicationPaletteChanged.
Change-Id: I95da211e30590e357007cc14d8ee266baceba7b3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This amends 23b998fa45, and the commits
3e7463411e and
947883141d. This change restores the
pre-5.13.1 behavior of setFocusProxy to not move focus away from a
previously set focus proxy.
With the previous changes, focus would move away from a proxy when a
new proxy is set, if the old proxy had focus. While there are arguments
in favor of this behavior, it is a change of behavior that shouldn't
be introduced to 20+ years old functionality in order to fix the real
bugs addressed by the initial commits.
Instead, move focus only to the new proxy when the focus widget was
the widget that gets a focus proxy.
[ChangeLog][QtWidgets][QWidget] setFocusProxy no longer moves focus
away from a previously set focus proxy, restoring pre-Qt 5.13.1
behavior.
Change-Id: Icf2ad7cba5b860014aeef91cb274c442a2ab9d42
Fixes: QTBUG-83720
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
Rather than have a fontChanged() signal which can be connected to for
tracking when the application font has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated fontChanged() signal in
favor of QEvent::ApplicationFontChanged.
Change-Id: Iae8e832238fc85e385a52305bc04f16e597454b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This follows up on commits 3e7463411e and
947883141d.
The changing of the pointer of QApplicationPrivate does not transfer
focus properly. It updates the pointer, but it doesn't deliver events
or update the widget hierarchy's focus chain. The result is that
multiple line edits might show a blinking cursor.
Instead, use QWidget::setFocus when the focus proxy has changed while
it had focus, and pass OtherFocusReason rather than NoFocusReason.
Add a basic test for QWidget::focusProxy, which exercises this code
path and verifies that pointers are consistent when focus changes as
a side effect of modifying the focusProxy.
Change-Id: I15a4d868bab2b590cfe4a1daa6a3c8cebc9c9ca2
Fixes: QTBUG-83720
Fixes: QTBUG-79707
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
If a widget backed by a QWindow is moved we need to translate the window
geometry into a position relative to the parent widget. In most cases this
was incidentally working due to widgets backed by QWindows always having
QWindow parents too, so the QWindow position was applicable to the widget
as well. But when Qt::WA_DontCreateNativeAncestors is used this is no
longer the case, and we would end up with a widget geometry that included
the parent positions all the way up to the next native widget.
The updatePos() function has been squashed into handleMoveEvent(), since
we need to ensure the position in the move event sent to the widget is
correct as well.
Change-Id: I55894ad7ab42a6d4d65e446a332ecdd7dcdcc263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When a window is closed, then it will cause the child windows to be
closed as well as a result. Therefore in order to ensure that they are
shown again as a result, we need to remove the WA_WState_ExplicitShowHide
attribute if the widget was not already hidden before. This enables us to
test for this attribute when calling showChildren(), so that if the
window has a windowHandle then we can make sure that this widget is shown
again.
Fixes: QTBUG-73021
Change-Id: I1186242b889899dfcd38d782a67567348e2055ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since 9c8d1ca18b, the test would fail
when High DPI scaling is enabled:
FAIL! : tst_QWidget::translucentWidget() Compared QImages differ in device pixel ratio.
Actual (actual): 2
Expected (expected): 1
.\tst_qwidget.cpp(8913) : failure location
Set the device pixel ratio on the expected pixmap to fix this.
Change-Id: I517495931c2c6b1f49125bb4b5836e304bdbf545
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Base it on QWidgetPrivate::associatedScreen(), but make a larger
effort to find a screen in case the widget is not shown yet.
Rename QDesktopScreenWidget::screen() to something else to avoid
clashes.
Task-number: QTBUG-62094
Task-number: QTBUG-53022
Change-Id: I36ba5ef5f0645a4ac89da0b38a391f7057b2f49c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Quoting a blog from 2009, "this class is responsible for figuring out which parts
of the window surface needs to be updated prior to showing it to screen, so it's
really a repaint manager."
https://blog.qt.io/blog/2009/12/16/qt-graphics-and-performance-an-overview/
What better time to do the rename than 10 years later!
Change-Id: Ibf3c3bc8c7df64ac03d72e1f71d296b62d832fee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It was added for Symbian almost 10 years ago (d7057e7c1f1a), for a somewhat
dubious use-case. The Symbian code is since long gone (ae30d7141), so the
remaining pieces are just adding complexity to the already intricate workings
of the QtWidgets backingstore/painting logic.
Task-number: QTBUG-8697
Change-Id: I82af610a8ac26719c588ac63f06b4501f59b400d
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
(cherry picked from commit 2e0b0be2ce)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Replace the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
- Modify the tests to make them build when deprecated APIs disabled:
* Make the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods
are enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, add tests for the replacement
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Task-number: QTBUG-76541
Change-Id: I6aaf0a1369c479fb880369a38f2b8e1e86b46934
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QApplicationPrivate::focus_widget became a dangling pointer
in the following scenario:
A widget first gets focus and later on gets a focus proxy.
QApplicationPrivate::focus_widget was still pointing to the initial widget.
Upon destruction, QWidget::hasFocus() [which follows to the focus proxy
and then compares with focus_widget] was therefore false for both
widgets. So QWidget::clearFocus() didn't call
QApplicationPrivate::setFocusWidget(0) for either of them. As a
result, focus_widget remained set, and became dangling.
In real life, this happened with a QWebEngineView, which the application
gave focus to upon creation. At that time it doesn't have a focus proxy
yet. That happens later, in QWebEngineViewPrivate::widgetChanged.
https://bugs.kde.org/show_bug.cgi?id=381793
Change-Id: Ifee610bb76a2d4d2797b98ece9bffe5fffe3c6a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The public QWidget::create still has them, but we don't need to
propagate them on - that just makes debugging the window creation
flow harder.
The window argument to QWidget::create is technically used to
guard an early exit in the function, but to keep behavior the
same we leave it for now.
Change-Id: Ic0287575aa25f1272e216adc1b75e34d6f55f6d9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
RenderHint::HighQualityAntialiasing and NonCosmeticDefaultPen are
obsolete since Qt5 but not marked as such. Therefore add
Q_DECL_ENUMERATOR_DEPRECATED_X now so those two enumerations can be
removed with Qt6.
[ChangeLog][QtGui][QPainter] HighQualityAntialiasing and
NonCosmeticDefaultPen are marked as deprecated and don't have an effect
anymore
Change-Id: Ib0c966a078a1d23d492d0255288e2066c50e87b6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QWidgetPrivate::updateIsTranslucent sets the surface format of the
window with the alpha based on the translucency attribute, so we need
to call this function when the attribute value changes. The test can
confirm that the window's requested surface format has changed, we
can't rely on what is actually set, and don't have to rely on
hard-coded values like 8bit alpha.
While WA_NoSystemBackground needs to be set for WA_TranslucentBackground
to have an effect, we can't clear the attribute when clearing
translucency (as it might have been set explicitly).
Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff
Fixes: QTBUG-60822
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
81e298a51d fixed a case where the focus
chain was screwed up when the order was already correct. This worked
correctly in most cases but not when the next focus widget of the first
one had Qt::NoFocus.
The optimization check if lastFocusChildOfFirst is the same as second is
thrown away since it now does not longer screw up the focus chain and
the save would only be four pointer assignments.
Fixes: QTBUG-75388
Task-number: QTBUG-10907
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Change-Id: I581ed532156c34ea970123afd063194aab016304
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Move the fuzz check introduced by
6309062722 to a shared header for
reuse. Use it in in more places to account for rounding errors
introduced by odd window frame sizes when scaling is active.
- Use the test widget size to ensure windows do not violate the
minimum decorated window size on Windows when scaling is inactive
on large monitors.
Task-number: QTBUG-46615
Change-Id: Icf803a4bc2c275eadb8f98e60b08e39b2ebebedd
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Use nullptr
- Fix C-style casts
- Fix redundant bool expressions
- Fix else after return
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax
- Remove unused variables
- Streamline code in some cases
Change-Id: I1350b382b0b7d0f3198039fdc78892cfa1dd498d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that MSVC (presumably) supports templates, we can merge the QRect
and QRegion versions of the functions into one.
The function has been renamed to invalidateBackingStore to better
reflect what it's doing.
Change-Id: I0e94a0cabd286cf97f2ba718a42ee0425f59d3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Replace all occurrences of QApplication::set/resetOverrideCursor with
the QGuiApplication::set/resetOverrideCursor since it's a static
function of QGuiApplication.
Change-Id: Ic898ab50a7ad4ed2bc9c6acb26cf4a979c2f82af
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test works for me with KWin and is blacklisted on most linux platforms.
Let's try to remove the blacklisting next.
Using qWait right in front of the QTRY_VERIFY does not add any value.
Task-number: QTBUG-26424
Change-Id: I2dcd5fb3f3cbb64e190c777231b791d1ad9dd704
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's not possible to ask for window activation on Wayland, and some Wayland
compositors—such as Weston—don't give window focus to newly created window
either.
Task-number: QTBUG-62188
Change-Id: Ibebb2a14e03127fec703d79498627fccf65b2f88
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Windows 10 windows contain an invisible area within the NC window frame
on which the mouse cursor is enabled to perform resizing. This change
captures the geometry of the invisible margins and considers it when
moving a window, so that, for instance, a move(0,0) does not generate
gap between the window and the beginning of screen.
[ChangeLog][Windows] The dimensions of invisible margins inside the
frames of Windows 10 windows will now be disregarded in the positioning
of Qt windows to avoid a misplaced look (offset by a few pixels from
the expected position).
Task-number: QTBUG-55762
Change-Id: I1f537756eb1a093f78b919de9d44992528199700
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][QtWidgets] QApplication no longer sends a mouse move event
to the entered widget if it sends synthetic enter and leave events.
Task-number: QTBUG-67736
Change-Id: I75daaffd53f1ddc2bc4d7df67382cbc22d3eb6fc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Drop the useless copy 'r' of 'region', reuse 'r' for the rects in 'region',
to clean up the region handling in verifyColor().
Change-Id: I8e159976b4b0152823be864488d2ef25d7cb0078
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A "compound widget" is a widget that has a focus proxy set to an inner
child. This is normal for complex black-box components where focus handling
is delegated to the children. Since the compound can have several
children, a local tab order might exist between them.
The current implementation of setTabOrder had no idea about
compound widgets. As such, when connecting two compounds in the
tab chain, it would just break up their inner tab order and
cause tabbing to ignore children other than the proxy.
The new implementation recognizes compound widgets, and add some
extra code to figure out the correct tab targets. This way, the
local tab order between the children will be preserved.
This implementation was inspired by the patches of Marek Wieckowski posted
in the linked bug report, and later modified by Nikita Krupenko.
[ChangeLog][Widgets] QWidget::setTabOrder() will now preserve the local
tab order inside a widget if it has a focus proxy set to an inner child.
Task-number: QTBUG-10907
Change-Id: I0673d39d70ec8c6bf64af30bf978d67c651b2f3c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Skip based on support for window activation instead of platform. Makes it clear
why the tests are skipped, and also enables them automatically if we implement
a shell extension that adds support for it.
Task-number: QTBUG-66849
Change-Id: I322aba5ce5f8db651db7b71f223ffacec037c920
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Change-Id: I7dbe9c7a91301e0002f9e1827f6d0b495d2b9ec5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test assumes that resizing a QWidget to 0x0 will result in the
QWindow ending up with that size, and hence not being exposed, but
this is not the case. On a QWindow level we treat 0x0 as a trigger
for the platform layer to set the default size, and the window
ends up exposed.
Ideally QWindows should allow 0x0 sizes, but this is a bigger change.
In the meantime, we skip the tests so that other changes can be
integrated without the test failing.
Task-number: QTBUG-61953
Change-Id: Ib17187b4afd1b06eaa76653be18e93abea555b59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Fix the condition in QWidgetPrivate::resolveLocale() to decide whether
to propagate locale: make it match setLocale_helper()'s condition when
deciding whether to propagate to descendants. This lead to a
QDateTimeEdit's calendar popup not getting told what locale to use
correctly, unless we setLocale() on it overtly, which then blocked
propagation of locale changes to it unless QDateTimeEdit manually
propagated the changes.
Fix the documentation of WA_WindowPropagation to mention locale as
also being propagated (which it was in several places, only neglecting
this one in resolveLocale).
[ChangeLog][QWidget][Qt::WA_WindowPropagation] Propagate locale
consistently, along with font and palette, within the widget
hierarchy. Previously, locale was propagated on ancestral
setLocale(), but not on creation of the descendant.
Task-number: QTBUG-59106
Change-Id: I92270f7789c8eda66a458274a658c84c7b0df754
Reviewed-by: David Faure <david.faure@kdab.com>
This reflects QWidget API, and restores some behavior from Qt4.
Some WM can have several state at the same time. On Plasma for example,
when a window is both maximized and minimized, the "maximized" checkbox
is checked from the taskbar entry.
The API of QPlatformWindow was changed to take a QFlag and the platform
plugins were adapted.
- On XCB: Always send the full state to the WM. And read the full state.
- On Windows: The code was originally written with '&' in Qt4, and was changed
to == when porting. Some adaptation had to be made so the states would be
preserved.
- On macOS: Only a single state can be set and is reported back for now,
with the possibly to expand this in the future.
- Other platforms: Just do as before with the effective state.
Task-number: QTBUG-57882
Task-number: QTBUG-52616
Task-number: QTBUG-52555
Change-Id: I7a1f7cac64236bbd4c591f796374315639233dad
Reviewed-by: Gunnar Sletta <gunnar@crimson.no>
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
If a floating QWidget has a parent on a different screen, its DPI was
still inherited from the parent instead of taken from the screen.
The only reason we did was in case there is a customDpi set.
(customDpi is a private thing that is only used in designer to change
the appearance of the previewed widget)
So instead of recursing into QWidget::metric for each ancestor, just
use a for loop to find if one parent has a customDpi. If no customDpi
is found, then return the DPI of the right screen.
Task-number: QTBUG-58959
Task-number: QTBUG-48242
Change-Id: Ie6e9e48cdd10234994c0919ba3aea9b0cdb52494
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Ensure that tablet moves are delivered iff tabletTracking is true.
Task-number: QTBUG-26116
Change-Id: Iaa360e181f0c6484cfbde6fa5365f2f0dc77433a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Updating the focus child means the focus object of the window has changed.
We need to report this to QtGui immediately so that it can e.g. inform the
input context of the new focus object, before widgets reacting to the focus
events start calling update() on the input method.
Change-Id: Ie3f7b835591e71519e3f384c2abdad53242c9736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Volker Hilsheimer
Tor Arne Vestbø
Marc Mutz
Laszlo Agocs
Eskil Abrahamsen Blomfeldt
Ivan Solovev
Giuseppe D'Angelo
Kirill Burtsev
Liang Qi
Allan Sandfeld Jensen
Lars Knoll
Morten Johan Sørvig
Richard Moe Gustavsen
Friedemann Kleint
Lars Schmertmann
Jarek Kobus
Shawn Rutledge
Oliver Wolff
Miika Pernu
Andy Shaw
Tor Arne Vestbø
Qt Forward Merge Bot
VaL Doroshchuk
Ulf Hermann
Christian Ehrlicher
Johan Klokkhammer Helsing
Sona Kurazyan
David Faure
Alexander Volkov
Frederik Gladhorn
Gatis Paeglis
Joerg Bornemann
Andre de la Rocha
Kari Oikarinen
Thiago Macieira
Kevin Funk
Joni Jäntti
Oswald Buddenhagen
Sergio Martins
Mitch Curtis
Sami Nurmenniemi
Edward Welbourne
Olivier Goffart