Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: Ia733105c5b6f28e22af511ced5271e45782da12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initialize a deleter for a new object, created by
QSharedPointer::create(), only after the object is actually
constructed.
[ChangeLog][QtCore][QSharedPointer] Fixed undefined behavior when
creating an object with QSharedPointer::create() and its conscructor
throws an exception.
Task-number: QTBUG-49824
Change-Id: I07f77a78ff468d9b45b8ef133278e8cdd96a0647
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Seems like an obvious omission.
[ChangeLog][QtCore][QVariant] Can now convert QUuid to and from
QByteArray, not just QString.
Change-Id: Ib56ae86ca0c27adaf1e095b6b85e64fe64ea8d18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSysInfo::productType() returned "osx" for all versions of macOS, even
10.12. Change 3e2bde3578 was incorrect.
[ChangeLog][Important Behavior Changes] QSysInfo::productType() and
QFileSelector behavior on macOS was restored to match what Qt used to
return in version 5.7.0 and earlier. The behavior found in Qt 5.6.2,
5.7.1 and 5.8.0 is removed.
[ChangeLog][Future Compatibility Notice] The identifiers that
QSysInfo::productType() and QFileSelector will use to identify macOS
systems will change in Qt 6.0 to match the Apple naming guidelines which
will be current then.
Task-number: QTBUG-59849
Change-Id: Ib0e40a7a3ebc44329f23fffd14b2b39392210c4f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
It is incorrect to collapse a "symlink/.." segment because the parent
directory of the symlink's target may not be the directory where the
symlink itself is located.
[ChangeLog][QtCore][QDir] Fixed a bug that caused QDir::mkpath() to
create the wrong directory if the requested path contained a symbolic
link and "../".
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e367730a1e24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
std::nullptr_t is nullary: it accepts only one value, nullptr. So we
don't need to read or write anything. This commit simply adds the two
operators that allow generic code to operate on std::nullptr_t if
required.
This commit also adds the actual use to QMetaType::load/save, even
though there's no change in behavior.
[ChangeLog][QtCore][QDataStream] Added operator<< and operator>>
overloads that take std::nullptr_t, to facilitate generic code.
Change-Id: Iae839f6a131a4f0784bffffd14aa37e7f62d2740
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Backtrace logging tests were not passing for arm. Added compile option
-funwind-tables to support backtrace on arm.
Task-number: QTBUG-59966
Change-Id: I5e2443b1e3a644a239dab68db990e75ae8fade24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Alignment test was not compiling or passing on GCC / arm
- Using C++11 alignas() enforces maximum limit for the alignment, which
at least on GCC / arm is __BIGGEST_ALIGNMENT__ multiplied by 8
- On GCC 6.2.0 / x86_84, maximum alignment accepted by alignas is 128
- On GCC 5.3.0 / arm, maximum alignment accepted by alignas is 64
- This change calculates biggest tested alignment on ARM targets
and compilers supporting alignas() to the value calculated
from __BIGGEST_ALIGNMENT__
Task-number: QTBUG-55492
Change-Id: If2b70000ff9cdc5ae8c5a00e39f79efcc6ba1221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu does not report /proc/self/maps size correctly. Added expected
failure for it
Change-Id: I4019884702b8f9a33717b02e79c9e0c042b2449f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The SHA3 family is a modified version of Keccak. We were
incorrectly calculating Keccak (and even *testing* Keccak!),
but claiming it was SHA3.
To actually calculate SHA3, we need invoke Keccak on the original
message followed by the two bits sequence 0b01, cf. §6.1 [1].
[1] http://dx.doi.org/10.6028/NIST.FIPS.202
[ChangeLog][QtCore][QCryptographicHash] QCryptographicHash now
properly calculates SHA3 message digests. Before, when asked
to calculate a SHA3 digest, it calculated a Keccak digest instead.
Task-number: QTBUG-59770
Change-Id: Iae694d1a1668aa676922e3e00a292cddc30d3e0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unix mmap(2) system calls do allow for mapping beyond the end of the
file, though what happens after you try to dereference the pointers it
gives is unspecified. POSIX[1] says that implementations shouldn't allow
it:
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified portions
of the last page of an object which are beyond its end. References
within the address range starting at pa and continuing for len bytes to
whole pages following the end of an object shall result in delivery of
a SIGBUS signal.
However, Linux allows this in read-write mode and extends the file
(depending on the filesystem).
Windows MapViewOfFile never allows mapping beyond the end.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/mmap.html
Change-Id: Ie67d35dff21147e99ad9fffd14acc8d9a1a0c38d
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Test tst_LargeFile::mapFile fails on Qemu for files over 4Gb.
Fixed by limiting maxSizeBits to 28 (must be n*4 and < 32).
- Bug QTBUG-21175 is also effective on ARM targets. Fixed by
expecting failure also on ARM.
Change-Id: I9103727e618a17259b4785ec8c284f3bb60ebea7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensures that numbers representable as 64-bit integer
are not printed using exponent notation.
Some JSON implementations such as the one of the Go
standard library expect this in the default
conversion to int.
Change-Id: Ic3ac718b7fd36462b4fcabbfb100a528a87798c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
mkdir(data2) depended on mkdir(data1) being run before, or it would
fail. In addition, the rmdir() test required the equivalent mkdir() test
being run before. So drop these annoying dependencies and make the tests
cleaner by having clear separation of the test data and merging the two
tests into one
The entryList() test still depends on the testdir being clean: it will
fail if mkdirRmdir() previously failed.
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e35972d2a3d8
Reviewed-by: David Faure <david.faure@kdab.com>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Task-number: QTBUG-59218
Change-Id: Ic839a36af1ecab39da0c3394c34181b6717e24e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QUrl::isRelative(str) would be false for such files, so first check for
file existence before doing any URL parsing.
Change-Id: I51b6229251ad94877ac408b2f8018456d3e10a36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit e0ea0f6178 optimized QChar <->
QString(Ref) comparisons by adding more overloads to avoid creating
QStrings from QChars just to compare them.
But these new overloads made existing comparisons to QChar ambiguous.
This was known at the time for QChar/int comparisons.
It has since turned out that also comparing to '\0' is ambiguous,
ie. not comparing to int or char per se is ambiguous, but comparing to
nullptr constants is, because QString(const char*) is just as good a
candidate as QChar(char)/QChar(int).
Since we allow QString/QChar comparisons, it seems logical to solve
the problem by adding QChar<->nullptr overloads.
[ChangeLog][QtCore][QChar] Disambiguated comparisons with nullptr
constants such as '\0', which 5.8.0 broke. As a consequence,
QChar<->int comparisons are no longer deprecated, as this was a failed
attempt at fixing the ambiguity.
Change-Id: I680dd509c2286e96894e13078899dbe3b2dd83bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has started failing recently on the CI, too.
Task-number: QTBUG-58745
Change-Id: I4c8834917e6455d00c300549ed448b06da75d5bc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
in the vain hope to get the CI unstuck again.
Change-Id: I1b01bb1d59a8850f68d1d80838f5606f4159bcbd
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Fixes the bug in QFile which allowed opening a file with reserved
characters in its name. If the name is a long file path, CreateFile
opens a file with a truncated name instead of failing, so we have
to catch reserved characters ourselves.
[ChangeLog][Windows] Fixed a bug that caused QFile to create
files with truncated names if the file name was invalid. Now,
QFile::open correctly fails to create such files.
Task-number: QTBUG-57023
Change-Id: I01d5a7132054cecdfa839d0b8de06460039248a3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Stale Lock files in the future can happen in some situations. For exemple
two computers with different clocks access the same file system. It could
be that one of the timestamp is totaly off (several years into the future).
[ChangeLog][QtCore][QLockFile] Fixed a deadlock occurring if a corrupted
lock file's modification time is in the future.
Change-Id: I8dac98a0e898c76bcef67f8c195e126c996b6add
Reviewed-by: David Faure <david.faure@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Let's take the beginning of the description: WaitForSingleObjectEx can
be up to 16 milliseconds early. This is proven by the fact that there
are tests doing:
wait(waitTime);
QVERIFY(timer.elapsed() >= waitTime - systemTimersResolution);
and failing.
Task-number: QTBUG-59337
Change-Id: Iae839f6a131a4f0784bffffd14a9a79523d69d94
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
ResultStore never actually exists, only ResutStoreBase does. So casting to
ResultStore<T> and calling its member functions is UB. Put the type dependent
function as template member functions within ResultStoreBase and so we don't
need QtPrivate::ResultStore anymore.
Same goes for the iterator.
Change-Id: I739b9d234ba2238977863df77fde3a4471a9abd2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Parameters passed by value, like local function variables, are subject
to NRVO/return-by-move already, so adding std::move, even disguised as
qMove(), makes Clang warn about a pessimizing move.
Change-Id: I7d59bfee4cf7ecddee0874ee489367044c702643
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QLocale::matchingLocales() simply created each locale using the basic
data, without (unless the matching conditions stipulated Language C)
applying number-options hacks that it applies everywhere else, when
creating the C locale. Thus the C locale in its returned list (if it
wasn't the only entry) ended up with the default number options,
without omiting separators in numbers. Thus QLocale::c() didn't
actually appear as an entry in the list. Discovered while
investigating QTBUG-58947.
Added a dumb autotest that checks various ways of getting the C locale
do actually give us equal locale objects. Fixed matchingLocales() to
apply the same hack as is used elsewhere for the C locale.
Change-Id: I263f31da623052b63171f5b5a83c65802383df21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit eab7efd1 increased the timeout for this test, but apparently 10
seconds are still not enough. Set the timeout to a minute.
Task-number: QTBUG-59075
Change-Id: Iebab8e5c73c4858ca90063a82aedfbb2546a62cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
C0 to DF take one continuation byte; E0 to EF take two.
It's invalid UTF-8 anyway, but at least this is what the test row meant:
overlong sequence with 3 bytes of what should have been two.
This updates the comment to match the character that we were actually
testing.
Change-Id: I85a8bd6da2c44f52b4e3fffd14a75df2600487aa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Tor Arne Vestbø
Liang Qi
Ihor Dutchak
Marc Mutz
Thiago Macieira
Sami Nurmenniemi
Kai Koehne
Giuseppe D'Angelo
Tony Sarajärvi
Marius Kittler
Ulf Hermann
Edward Welbourne
David Faure
Anton Kudryavtsev
Jesus Fernandez
Olivier Goffart
Joerg Bornemann