All QFontDatabase APIs are static, use them accordingly.
Task-number: QTBUG-88114
Change-Id: I0e4a7508646037e6e2812611262eed8b6d7ad3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This attribute is now on by default.
Change-Id: I7c9d2e3445d204d3450758673048d514bc9c850c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove usages of Qt::AA_UseHighDpiPixmaps from examples/.
This flag is now on by default, and can't be disabled.
Task-number: QTBUG-83092
Change-Id: Ie28622f816da2fe28d4ab272d45ea20bd051d5f3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Duplicating the number of classes is a high price to pay to be able to
have some QAction functionality behave differently, or be only available
in widgets applications.
Instead, declare the entire API in QtGui in QAction* classes, and
delegate the implementation of QtWidgets specific functionality to
the private. The creation of the private is then delegated to the
Q(Gui)ApplicationPrivate instance through a virtual factory function.
Change some public APIs that are primarily useful for specialized tools
such as Designer to operate on QObject* rather than QWidget*. APIs that
depend on QtWidgets types have been turned into inline template
functions, so that they are instantiated only at the caller side, where
we can expect the respective types to be fully defined. This way, we
only need to forward declare a few classes in the header, and don't
need to generate any additional code for e.g. language bindings.
Change-Id: Id0b27f9187652ec531a2e8b1b9837e82dc81625c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
printsupport features are only available if the module is available for
the configuration. Every printer feature check has to be coupled with a
check for the module itself.
Change-Id: Id2ca84e71d5d74463d0ff35e8b18b252a779a883
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
These examples show very tiny UI elements on Android devices,
thus enabling HighDPI.
Task-number: QTBUG-80717
Change-Id: I813801d5249dc1fcfc6f61a8d146f60dd19901f6
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The idea is to reserve device() to return a pointer to a QInputDevice
in the future, which is in sync with QQuickPointerEvent::device()
and with QTouchEvent::device().
Change-Id: Ifda6e8aea72d5121955b31bdcbd91bf1bfa4cec4
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
The following signals have been removed:
- void activated(const QString &);
- void highlighted(const QString &);
Task-number: QTBUG-81845
Change-Id: I61b552d9258987d4252202953aaf4909f9bd718e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Checking for QT_CONFIG(printdialog) is not enough when printsupport is
completely disabled since then the macro will throw an error. Therefore
add an additional check 'defined(QT_PRINTSUPPORT_LIB)' before using the
QT_CONFIG macro.
Fixes: QTBUG-81626
Change-Id: Ie9898f057cdd6bf9daf4ba9135987cb6e901e7bf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
They're value types, so we should show them being used as such.
Change-Id: If9f0c366fac66306b7861f04e2f047540d444acc
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
src/corelib/serialization/qjsonvalue.cpp:174: (qdoc) warning: No such parameter 'n' in QJsonValue::QJsonValue()
...
examples/widgets/doc/src/icons.qdoc:584: (qdoc) warning: Command '\snippet (//! [24])' failed at end of file 'widgets/icons/mainwindow.cpp'
src/corelib/text/qbytearray.cpp:5177: (qdoc) warning: clang found diagnostics parsing \fn QByteArray::FromBase64Result::operator QByteArray() const
error: out-of-line definition of 'operator QByteArray' does not match any declaration in 'QByteArray::FromBase64Result'
src/corelib/serialization/qjsonarray.cpp:178: (qdoc) warning: Overrides a previous doc
src/corelib/serialization/qjsonarray.cpp:140: (qdoc) warning: (The previous doc is here)
src/corelib/serialization/qjsonobject.cpp:1016: (qdoc) warning: clang found diagnostics parsing \fn QJsonValueRef QJsonObject::iterator::operator[](int j) const
error: out-of-line definition of 'operator[]' does not match any declaration in 'QJsonObject::iterator'
src/corelib/serialization/qjsonobject.cpp:1267: (qdoc) warning: clang found diagnostics parsing \fn QJsonValue QJsonObject::const_iterator::operator[](int j) const
error: out-of-line definition of 'operator[]' does not match any declaration in 'QJsonObject::const_iterator'
src/corelib/tools/qhash.cpp:2641: (qdoc) warning: Overrides a previous doc
src/corelib/tools/qhash.cpp:1492: (qdoc) warning: (The previous doc is here)
src/corelib/tools/qhash.cpp:2659: (qdoc) warning: Can't link to 'unit()'
src/corelib/text/qchar.cpp:274: (qdoc) warning: Undocumented enum item 'Script_Sundanese' in QChar::Script
src/corelib/text/qchar.cpp:274: (qdoc) warning: No such enum item 'Script_Sundaneseo' in QChar::Script
src/network/ssl/qsslsocket.cpp:1514: (qdoc) warning: Can't link to 'QSslConfiguration::addDefaultCaCertificate()'
src/widgets/widgets/qtabwidget.cpp:581: (qdoc) warning: Undocumented parameter 'visible' in QTabWidget::setTabVisible()
Change-Id: I05c2a4884873850b684fa94036cd90db1a6e7726
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of polishing the (possible) system palette. Makes the checkbox
for "Use style's standard palette" actually work for the custom style,
and is how styles are supposed to provide their own preferred palette.
Change-Id: I3228ef45c023d0d058e48ff0fc14f094367b2008
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Allows running the example with -style foo or QT_STYLE_OVERRIDE.
No changes to documentation needed.
Change-Id: Id7cef450f13faabd118badde51afb7273439c9fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Relying on the hard clipping of QRegion widget masks to create
non-rectangular windows is a solution from a bygone era. The result
looks horrible with today's eyes, particularly on a high-dpi
screen. Update the example to create smooth anti-aliased edges using
translucent window bacground.
Task-number: QTBUG-64229
Change-Id: I8859d61177d2a2dc446632c23f27f42050e0d7c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The example is useful as a gallery for widgets in
which case the custom Norwegian Wood style is not primarily interesting.
Change-Id: I96e304f97edeb43da6e8f572e01a768b1317722c
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Volker Hilsheimer
Alexandru Croitor
Alexander Volkov
Morten Johan Sørvig
Tor Arne Vestbø
Lars Schmertmann
Jarek Kobus
Shawn Rutledge
Simon Hausmann
Qt Forward Merge Bot
Oliver Wolff
Lars Knoll
Assam Boudjelthia
Vitaly Fanaskov
Liang Qi
Sze Howe Koh
Christian Ehrlicher
Edward Welbourne
Leander Beernaert
Friedemann Kleint
Olivier Goffart
Eirik Aavitsland
Ulf Hermann