We only want to change the capitalization if the QScriptAnalysis flag
was Lowercase, Uppercase or SmallCaps.
Task-number: QTBUG-17485
Change-Id: Icbecb09b06a9153866ae81d592b3f6779c2dafb5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
They are still internal, but all Qt5 modules will be able to use
them then.
Change-Id: I42ab656115b0976ca959293dfd664ec071f35dbf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This will make it possible (in Qt 6) to remove the enums listing
metatype ids. As it is constexpr, it can be used in switch statements
just like enums, as enum values, and as template specialization values.
Change-Id: I51293674c403714e34cb8a8b8953522fc97a740a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
If the used font engine is of type QFontEngine::Multi, then we already have
both the "font engine runs" and the stripped glyph indicies for the kerning
-> just call the actual font engine's doKerning() method.
If the font engine is not of type QFontEngine::Multi, then we could safely
avoid the glyph indicies extra manipulations.
Change-Id: Ia8899e6d7beecfd391b050683ac41c21465336e4
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
The only complicated aspect to this was deferring EGLsurface
re-creation as a result of window geometry changes (e.g. when we
receive an orientation change event). To allow this to be done
in a controlled way we defer the surface manipulation until the
next call to QQnxGLContext::makeCurrent().
Change-Id: I8062d3e4d19220a822fbc3b8ca563bb1e3be09d0
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
First, check that the option in question hasn't been already enabled
by the compiler, via compiler switches. If it has been, then we don't
need to verify anything, and we can assume that it's safe to use such
instructions. For example, on an x86-64 build, qCpuHasFeature(SSE2) is
always a constant true.
If the compile-time check fails, then we proceed to try and detect the
processor features at runtime. But instead of insisting on a call to
qDetectCPUFeatures, allow the code using the detection to read from a
variable and simply test it for values. Only if the variable isn't
initialised should it make a function call. The Q_ASSUME allows this
code to be very efficient even with multiple uses of qCpuHasFeature.
Change the uninitialised value from -1 to 0 so that simpler
instructions can be used to check for non-initialisation.
The qDetectCPUFeatures function is renamed to qDetectCpuFeatures to
match the Qt coding style and also to catch uses this code that need
to be adapted.
Change-Id: I24ca5a6ad21075e2e249e1a4f8f5057b8f68ce7c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
canConvert() and convert() use the metaobject to convert such types.
Change-Id: Ic05e74c5c2423b4b9682b88adc856a16dcba4cff
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This will allow conversion between pointers to compatible QObject
derived types.
Change-Id: I19e08934571fb3f1b91e594892214041fe5f6a11
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
If the default settings already include the necessary flags, do not
override the compiler flags, possibly lowering support. This allows
the user to specify a higher setting for a Qt build, such as what
MeeGo did (it enabled SSSE3 support in all builds).
Additionally, this prevents us from passing -msse2 or -arch:SSE2
options to x86-64 builds, as SSE2 is a mandatory part of that
architecture. This silences a warning from MSVC that the option is
unknown in 64-bit builds.
Change-Id: I6e2969b672bcac87168c245b8be3309e8cc49224
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Now QWidget::show() will be the same as QWidget::showFullScreen() if the
style hint is set.
This is consistent with QQuickView now.
De-inline related methods to make it easier to change them later
without breaking compatibility.
Change-Id: I843ac6f846428217bfc5dc9f1d0a554de9d0c08f
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The dependencies on QFont, QBrush, QIcon are all in QtGui, so there's
little sense to still have these classes in QtWidgets.
This also copies and pastes a version of QWidgetItemData as
QStandardItemData inside qstandarditemmodel_p.h.
Change-Id: Ibafc5a30748e7ce0b54753309ae6dc4a797fc20e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
- Add infrastructure to QWindowSystemInterface.
- Add a setter for enabling framestrut events
to QPlatformWindow.
- Add Windows implementation, pass keyboard modifiers.
QDockWidget relies on it for docking.
Task-number: QTBUG-26296
Change-Id: I9d84b356e9a5eb341f57b6f51f34b6b494ff7f87
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Change-Id: I71f1052f614f4e926acf2c2b76963770f7b35c96
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The Q_COMPILER_NOEXCEPT feature indicates whether this compiler has
support for noexcept. Note that the GCC C++11 status page does not
list this feature, but investigation into the source code as well as
testing reveals it's supported since GCC 4.6.
Also add Q_DECL_NOEXCEPT, to be used to declare that a function throws
no exceptions, and Q_DECL_NOEXCEPT_EXPR(x), which declares that the
function throws no exceptions if x evaluates to true. In C++98 mode,
these macros expand to empty -- the old C++98 and C++03 exception
specification is deprecated and considered harmful.
Change-Id: Ic84901d13eceb06dcc7f025a4b7fc8b250769be9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QtPlatformSupport is a static library. It should never export
anything, so Q_PLATFORMSUPPORT_EXPORT is unnecessary.
QtSql, QtXml, QtDBus, QtOpenGL and QtPrintSupport now have the macros
on their own source trees. It's possible these modules might be
separated out from qtbase in the future. For QtDBus, the macros are
moving back to where they used to be. This also leaves qglobal.h only
creating the macros for QtCore, QtGui, QtWidgets and QtNetwork, the
core libraries.
Q_CANVAS_EXPORT, Q_OPENVG_EXPORT and Q_COMPAT_EXPORT aren't used
anywhere in the Qt sources, so simply delete them. And the
Q_QUICK1_EXPORT macro in the static section was wrong, so remove it
too.
Change-Id: I50bdf86e783338f814903b25979721f788a7becf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
That's the targetted, correct way of defining a static library.
Change-Id: I43c23bf7e1bc5fb07bbb55720a320eaca680b038
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: I55dcc1d188a2c45a11b0ab6a194625b50906eca9
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
QCalendarWidget currently uses Qt::Sunday as the default first day
of the week. It has been suggested that a better user experience
would see the calendar's locale be used instead.
Task-number: QTBUG-19811
Change-Id: I4441bf9ffd52213ef622a4a7f498530b7cc9e110
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
There can be occurences of \qmlclass where there is no C++ class (for a
pure QML Type for example). QDoc will ignore searching for a C++ class
when '0' is specified as second argument to the \qmlclass command.
Change-Id: I09c8c7ad302daffb0723a49967951ca623e646e4
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The Maemo-specific function have been renamed a bit to prevent them
clashing with the more generic stuff.
Task-number: QTBUG-25865
Change-Id: Id55693159e15d5a0c679546eb48308feb48acac9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Some documenters are using two topic commands in a single qdoc
comment. This is only allowed for \qmlproperty so that multiple QML
properties can be documented with a single comment. qdoc now reports
an error for all other combinations of multiple topic commands.
Task Nr: QTBUG-26345
Change-Id: I1f9a6d2502ccffa76c2d41f961be3750014a0a56
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
These can't happen async, as otherwise the geometry of the widget is
changed too late, having the effect that QWidget::show_sys() would
overwrite the window geometry again.
Change-Id: Id60d009867a5b282ac14c112c872af1075660732
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
When calling SetWindowPos in QWindowsWindow::setWindowState_sys we must
inform the QWidget about the new size we have set.
Task-number: QTBUG-26226
Change-Id: I42b01125f50a94cdb97026c74f5445f9ff47d8ba
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
If mask was set to a widget before the widget was shown,
the mask was not applied.
Also, if toplevel widgets were set a mask in Windows, the mask was
applied to frame coordinates instead of client coordinates.
Ported relevant code from Qt4 to fix these issues.
Change-Id: Id6187cf4952b81b5b60c167e2fd284b7dc83ed9c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
PlatformSupport is no longer shared and there should be no plugin
factory in it otherwise it will break plugin loading.
Since PlatformInputContext is already in QtGui, so move QPlatformInput-
ContextPlugin/Factory to resolve the platforminputcontexts plugin
loading problem. And remove platformsupport-private dependency from
existing inputcontexts plugin.
Change-Id: If4cb766470b8f9c8b72157da86cb33b4e1ff09e3
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
QPair is small and is no problem to include from
qdatastream.h. However, including QDataStream from qpair.h means
including QIODevice and QObject too.
Change-Id: I344321e9f68438008ec329a165135c3a346c6058
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QT_NODLL is replaced by QT_STATIC, but the latter is implied if
QT_BOOTSTRAPPED is already defined. Therefore, simply remove the
QT_NODLL definitions.
Change-Id: Iac7ec0b494b7a78197c25d59547f45eaf92d7465
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Primary goal, make the front page of the Qt GUI module a bit more
clarifying and avoid downstream references inside the Qt GUI docs.
Change-Id: Icbcfbb64b93963add889bf83711daa9575885c02
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
qobject.h includes it, but only if QT_NO_QOBJECT isn't defined. It is
during the build of the bootstrapped tools.
Change-Id: I8fc921fb17c283358af263a6932b763a21209d40
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Copy-and-paste error; the doc was based on QObject::receivers.
Change-Id: I4f6ce716d388328e0345e8457cbc99fff323ce41
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since QStateMachine inherits QState, QStateMachine::finished() and
QState::finished() are the same thing.
Task-number: QTBUG-14553
Change-Id: I7df2f815be377c19aeee393e9a2ce124183dc5e1
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Do not go searching for a parent window handle in
setMask_sys() as this causes for example MDI areas
to set masks that show the child only.
Fix breakage introduced by 8e280d1e18 .
Change-Id: I57de41d16985ebc8d3fc81153a671f2e2807b1eb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Now QQuickView::showFullscreen() works as expected.
QQuickView has no fallback for platforms without window state support,
as opposed to QWidget.
Change-Id: I9c41fe563ea1f6d117eaebd3ea1db87465142b85
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This fixes a painting glitch where the window would stay in the old
position with the old rotation until it got repainted.
Change-Id: Id9de256b525760e8b32e55a87549efeccca151e0
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
filterEvent for QPlatformInputContext is already used for auto repeat
key, x11FilterEvent also need to be filtered.
Task-number: QTBUG-25795
Change-Id: I3db87fdffdb5b01404047e905793ae6e10bb1e90
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
foreach already knows how to iterate over the values without the need to create an intermediate qlist
Change-Id: I4622a36fbdbf536a75f26b42e32488a77d078f02
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Yann Bodson
Stephen Kelly
Konstantin Ritt
Sean Harmer
Holger Hans Peter Freyther
Thiago Macieira
Jonathan Liu
Jeremy Katz
Thomas McGuire
Giuseppe D'Angelo
Friedemann Kleint
Marc Mutz
Pekka Vuorela
Frederik Gladhorn
Mitch Curtis
Casper van Donderen
Kent Hansen
Laszlo Agocs
Martin Smith
Joerg Bornemann
Miikka Heikkinen
Weng Xuetian
Gatis Paeglis
Gunnar Sletta
Adrian Carpenter
Albert Astals Cid