After 7369c31ca1f446e81eda1c93ba13767ffcd83efe, unaccepted touch points
were not grabbed anymore in calls to activateImplicitTouchGrab. However,
gesture recognition relies that widgets for which a gesture has been
partially recognized grab also unaccepted touch points.
Add a parameter to allow the implicit grabbing to take place also for
unaccepted event points.
Add test case that replays touch events similar to what Squish is doing,
and fails without this fix.
Pick-to: 6.2
Change-Id: Idb0b20301b1827be57a03013a59043d97c2ee7b6
Reviewed-by: Stefan Gehn <stefan.gehn@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Expose QWidgetRepaintManager's data structures so that we can write
unit tests, and verify that they are correct after moving opaque
widgets (which triggers the accelerated move code path).
Improve the compareWidget logic to not rely on screen grabbing
(which requires permissions), but instead use QPlatformBackingStore's
toImage function, which is faster and more reliable, and also doesn't
require us to show the UI we want to grab full screen in order to
avoid issues with overlapping windows etc.
Change-Id: Iff2ea419f03a390ab6baca26814fef6ff45f7470
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On some platforms, such as X11 and Wayland with some compositors,
QMenu could be a popup window, which should be set a transient parent
to get relative position, which is requested by Wayland.
Added transientParentWindow() for QMenuPrivate like QDialogPrivate.
Fixes: QTBUG-68636
Pick-to: 6.2
Change-Id: I6d8880cb008ecf61a4c005898b38e3953379a13d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Added to QWidgetRepaintManager test case, which is the only place where
the function is used.
Includes a helper that creates a complex scene with opaque children,
which will be used in additional unit tests.
Change-Id: I0e0188dd560923a552a8967d8e992dc17cc849d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When you are editing in a QTextEdit and press enter to start a new line,
calling insertBlock() with no arguments tries to preserve the current
charFormat and blockFormat. That is often OK:
- if you hit enter at the end of a list item, you probably want another
item in the same list
- if you are writing code inside a code block, you're probably just
writing the next statement on the next line: stay in the same block
- margins, indents, tab positions should stay the same (but hopefully
your editor has UI to manually reset the block format to default
in case you are not continuing in the same style)
But there are some exceptions we can apply to be helpful:
- nobody ever wants to follow an <hr/> with another one (but
hopefully the application has an action to insert one manually)
- a heading is more likely to be followed by a paragraph, or perhaps
a smaller heading; another heading at the same level is unlikely.
We need to reset the char format, not only the block format, because
the large font and heavy font weight are stored there.
- when adding to a todo list, hitting enter at the end of the last task,
let's assume the next task is not yet done, so it will be unchecked
by default (else, why are you writing a todo list at all)
To achieve that, we need to customize the formats and call the
insertBlock() overload that takes them. The no-argument insertBlock()
will continue to preserve the formats, because it's an old API that is
used for much more than interactive editing.
Additionally, word processors tend to let you end a list (for example)
by hitting enter twice. In that case, you stay in the same paragraph
that you created the first time you hit enter, but now the formats are
reset to default, so that you can go on typing an ordinary paragraph,
rather than having to mouse up to the toolbar to select the paragraph
style in a combobox, or something like that. So we now do that: reset
both block and char formats after you hit enter on a blank line; but if
you then hit enter again, after the block format has been reset, then
you will get the actual blank line (empty block) inserted.
[ChangeLog][QtWidgets][QTextEdit] Hitting enter at the end of a line
with a special block format (horizontal rule, heading, checklist item)
now makes some "smart" adjustments to avoid retaining properties that
are unlikely to be continued on the next line. Hitting enter twice now
resets block and char formats to default.
Fixes: QTBUG-48815
Task-number: QTBUG-80473
Fixes: QTBUG-97459
Change-Id: I3dfdd5b4c0d9ffb4673acc861cb7b5c22291df25
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
We need to check whether the horizontal header's selection includes the
index for the row at the top, rather than for row 0, as the index we
check is based on the scrolled position of the header, so would never be
included in the top row when the view is scrolled. This is correctly
done in selectRow already.
Add a test case that simulates selection of rows and columns by clicking
on the header.
Fixes: QTBUG-98444
Pick-to: 6.2
Change-Id: I2fa1b32bf75dc96225b40145b713bf7e2ffc29dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The first sub window added will activate itself automatically, and
isActive is set to true. Therefore the call to setActiveSubWindow to
activate the first sub window will be ignored.
When showing the mdiarea, all sub windows will be activated in the order
in which they were added, so the active window will always be the last
sub window added.
Fix this by setting isActive to false so that setActiveSubWindow
activates the first sub window when the mdiarea becomes active.
Fixes: QTBUG-92037
Pick-to: 6.2
Change-Id: Id4a793e2059803c1a4ada916fdae2d3cc02cdf06
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Don't crash if the font does not have any families set.
Pick-to: 6.2
Task-number: QTBUG-97995
Change-Id: I8dc2f2fc00309b6fff6d4a661ec6d659f30808af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If QFontComboBox is instantiated in the form of new and call
QFontDatabase::addApplicationFont, QFontComboBoxPrivate::_q_updateModel()
will be called when the program exits, at this time qApp will crash.
Fix this by when program exiting, QFontComboBoxPrivate don't need
call _q_updateModel().
Fixes: QTBUG-98099
Done-With: Konstantin Ritt <ritt.ks@gmail.com>
Pick-to: 5.15 6.2
Change-Id: I3df3d19c3d1971288d60f2eef386262befbf396b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In paintAndFlush, QWidgetRepaintManager subtracts opaque children if
the target isn't overlapped and isMoved is set to true. So in moveRect,
set isMoved to true after the blitting of movable areas, and reset it to
false if we have overlapped sibling or child regions. Otherwise, moving
so far that sourceRect is invalid (none of the original pixels are
visible after the move) we end up in a code path that sets isMoved to
true even with overlapping children or siblings, which then breaks
paintAndFlush's assumptions.
Reuse the test case written by Sergiy Korobov <tiamatenko@gmail.com> in
earlier attempts to fix this bug.
Fixes: QTBUG-26269
Pick-to: 6.2
Change-Id: If7443863f5eee79a80220cd587522122f42a21e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since QMainWindow::setMenuWidget accepts a QWidget (allowing users to
implement their own menu widget), we need to use qobject_cast on the
stored widget to see if it is a QMenuBar before calling QMenuBar APIs.
This qobject_cast may return nullptr.
Pick-to: 6.2
Fixes: QTBUG-98247
Change-Id: Iff1dbd24fa7ca09098fe49c179770356c966251d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTabBar implements wheelEvent to move the current index up or down. This
is useful for clicky mouse wheels, but a bad user experience when using
a kinetic wheel or touch pad, as every pixel movement will change the
current index.
Instead, scroll the entire tab bar when the wheel event comes from a
device that supports scroll phases, without changing the current index.
As drive-by's, fix the test introduced in aa09bea00c to
not leak memory or leave a test-specific style set on the QApplication
instance, which can break other tests.
Also, make relevant layout code in QTabBar respect the usesScrollButtons
property, const'ify local variables, and return an accepted QWheelEvent
if the event resulted in a change.
[ChangeLog][QtWidgets][QTabBar] Scrolling with a kinetic wheel or touch
pad scrolls the entire tab bar, without changing the current index.
Change-Id: I990e51466dd25c741877bbf0e197449f897a9efb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The slider is very touch friendly from macOS 11 on, and the knob is quite
large. Give it some extra pixels, and adjust the test accordingly.
Pick-to: 6.2
Task-number: QTBUG-98093
Change-Id: Iedf6db1081cdd4013ca29ce760aea1e0361b1123
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Check that a file name, not the full path, contains a dot.
Fixes: QTBUG-59401
Pick-to: 5.15 6.2
Change-Id: I193b2ae457a3ac6a460524dbf200786eb3461cef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
After special processing for hover, QPushButton::mouseMoveEvent()
needs to call the base class function, like every virtual override
should, to continue processing other logic. Amends
3310e13a17
Fixes: QTBUG-97937
Pick-to: 6.0 6.2
Change-Id: Ic2e111d6c38371e0aa04423f5fb26c52717bf5fb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Relying on QCursor::pos makes tests fragile and prevents multi-seat support.
Instead, record the mouse position in the already existing event handling,
and use that instead. Styles might use either WA_Hover or enable mouse
tracking for the widget to enable hover-effects, so we need to support both.
Fix the scenario where a newly inserted tab ends up under the mouse, which
was previously not handled correctly (only the case of removing a tab was).
Clean up the repaint management when the hovered tab changes; just call
update on the old rect, and then later update on the new rect; there's no
need to make a copy first, updates are posted and compressed.
Add a unit test that makes sure that we paint tabs that should be under the
mouse in the hovered state. Since not all styles enable hovering and/or
mouse tracking in all cases, use a style sheet for those styles that don't.
Change-Id: I7cdbb18e9e04b52651e273680fec87b50cb81e05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Amends 17c1ebf8bf, which introduced logic
that recognizes double clicks to avoid duplicate clicked() emits. If a
slot connected to doubleClicked opens a dialog, then the release-event
will not be seen by the item view, leaving the flag incorrectly set and
preventing the next clicked signal.
Fixes: QTBUG-97853
Pick-to: 6.2 5.15
Change-Id: Iced83e8c66a763672f522265435dc52a745227e4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Otherwise, the button state maintained by Qt when using the offscreen
plugin is not reset, breaking following tests.
Pick-to: 6.2
Task-number: QTBUG-97964
Change-Id: Ib37fd038e214863e1e316dc3d41e9d28c157b1f8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
QTest's simulation of mouse move events currently uses QCursor::setPos
and then processes events. This is unreliable across platforms.
This test relies on the event processing and either way has inverted
logic in the paint event; the painted region needs to at least include
the tab's rect, not the other way around. Also, the mouse move wasn't
needed here at all, and some styles don't have a different style for
pressed tabs anyway.
Pick-to: 6.2
Change-Id: Ib8f6f7be017ff87458e96ec419edcd065dd75b15
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Calculate effect bounds for the updated region when drawing the effect
so that the whole affected area gets updated. The effect bounds have
already been added to the region so it doesn't need to be handled in
the drawing function.
Pick-to: 6.2 5.15
Fixes: QTBUG-96240
Change-Id: I0c317311622e6299fb1a3015541408d1d83c93de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTabBar caches the rects for the tabs to avoid costly recalculation of
each tab's size hint. That cache is only updated via layoutTabs if the
entire tab bar is resized or modified. However, when a style sheet is
set that calculates a different size hint for tabs that are selected,
then the tab bar also needs to be laid-out when the current tab changes.
To minimize the cost, compare the cached size for the new current tab
with its new size hint, and re-layout the tabs when they are different.
Fixes: QTBUG-6905
Fixes: QTBUG-8209
Pick-to: 6.2
Change-Id: I110444d18938c2b3446ee58e4a8c6c472b5f12c3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Menus can be represented by a menu action, and if that menu action has
been hidden or disabled, then the submenu is not accessible from the
parent menu or menu bar to which it was added. Don't walk the menu
action chain further when checking whether the shortcut should trigger.
Note that this is unrelated to the menu being visible or not; we
obviously want to trigger shortcuts for actions that only live in a menu
that has not been shown, otherwise the shortcut would be rather
pointless.
Pick-to: 6.2
Fixes: QTBUG-25743
Change-Id: I48735e17352989bbc84a72263e4828f519b78095
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Some item views, such as QListView in icon mode, implement a selection
rectangle with which the user can "lasso" items. So far, dragging that
rectangle did not trigger auto scroll, so unless an item near the edge
was selected, the user had to stop the lassoing and scroll manually to
reach more items.
Since QAbtractItemView implements auto scrolling for drag'n'drop, we can
use that mechanism also when the selection rectangle is dragged. This
requires some modifications:
We need to make sure that scrolling the view during a drag-selection
generates mouse move events so that the selection is extended and the
rectangle is updated in subclasses.
And we need to stop using QCursor::pos to get the position of the mouse
pointer, as this makes the auto-scrolling untestable. Instead, record
the mouse position last seen during a mouseMove or dragMoveEvent in
content-coordinates (identical to pressedPosition).
As a drive-by, fix some coding-style issues in nearby code.
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-96124
Change-Id: I426f786e5842ae9f9fb04e9d34dc6d3379a6207f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Instead of plumbing QWidgetWindow close events via handleCloseEvent,
we just implement closeEvent directly. This allows QWindow do save
the state of the window/widget before the close event, so that we
know whether we should trigger lastWindowClosed handling, even if
the window was deleted as a result of the close event.
This also relieves QGuiApplication and QApplication from dealing
with the close logic in their notify functions, so that these
functions can focus on the propagation of events -- not how the
event is handled.
Change-Id: I8b586b53a53b1df1d8630c1acb635c60f191bb4b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends 32edae5e26, which introduced a
timeout after which the restored state is discarded. If this timeout
hits during a CI run, then the test is expected to
fail.
Implement a lambda that watches for the restored state to disappear.
This happens primarily when restoring a fullscreen state, where some
desktop environments scroll in a new virtual desktop. It should not
happen for other data tags.
Change-Id: I5ff43a4e1857eca17a5d4fe2b47add1f70636e8d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
On systems that asynchronously resize the window to maximized or full
screen state, the window will become visible in its normal geometry
before it gets the final size by the windowing system. This might cause
multiple resize events, to each of which the widget's layout responds
with a call to its setGeometry implementation.
The QMainWindowLayout is special in that it will shrink dock widgets if
there is not enough space for them, but it doesn't grow them back once
there is. With the initial resize event being for a smaller size than
what was restored, the state is not restored correctly, but remains in
the state that fit into the smallest size with which setGeometry got
called.
To fix this, we have to keep the restored state around until the window
either gets a size that is large enough for it to fit, or until we can
be reasonably certain that the windowing system is done resizing the
window while transitioning it to the maximized or full screen state.
Since across the various platforms and windowing systems there is no
reliable way to know when the window reaches its final size, we have
to use a timer that we (re)start for each call to setGeometry with a
size that's not large enough. Once the timer times out, we have to
give up; then the last layout state calculated is the final state.
To calculate the size of the layout, introduce a function to the
QDockAreaLayout that returns the size required for the current sizes
of the docks. Refactor sizeHint and minimumSize (which were identical)
into a helper template that takes member-function pointers to call the
respective method from the dock area layout's content items.
Add a test case for various permutations of the scenario. The timeout
of 150ms is based on running this test case repeatedly on various
desktop platforms and X11 window managers.
Fixes: QTBUG-46620
Change-Id: I489675c2c40d3308ac8194aeb4267172b2fb38be
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Cocoa sends QWidget the state-change notification after the window has
been resized already, at which point we cannot store the normal geometry
anymore.
Handle zoom and full screen callbacks prior to the state changing
to store the geometry in QCocoaWindow. We do not need to handle
minimized state, as the window will still reflect the original
geometry.
Return the stored value from an override of
QPlatformWindow::normalGeometry so that QWidget gets the correct values
even though the new state is already active.
Fix the tst_QWidget::normalGeometry test to make it pass on all
platforms by waiting for the window to actually have transitioned to
the new state before comparing geometries. Both macOS and Windows fully
pass; on Xcb, deminimizing a window using setWindowState does not work,
which is why the test was partially skipped (confirmed by visual
testing). Move those problematic, complex test cases to the end so
that most cases are covered on Xcb as well.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Pick-to: 6.2
Change-Id: I518a5db9169b80e8fa25fe4fa2b50bd1ea0e6db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Doing so results in bailing out early for a widget that hasn't been
shown yet, or otherwise resulted in creating extra and topextra,
which means the normalGeometry will not reflect the widget's geometry.
Pick-to: 6.2
Change-Id: Ieb85e9a6109ae34fe20d79e3c12f4517f827a590
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since commit 7ba75d0 we close the QWindow in QWidget::close for native
widgets and trigger the closeEvent in QWidgetWindow. However, if the
widget's window handle is not a top level window, QWindow::close()
will not close the window, failing in this way to deliver the
closeEvent and call the close handling in QWidgetPrivate::handleClose.
To fix, call handleClose() from QWidget::close for such widgets.
Task-number: QTBUG-74606
Pick-to: 6.2
Change-Id: Ied342eced3340aaf19b5443762935b1a5fc5c27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The signal is emitted from QGuiApplication these days.
Pick-to: 6.2
Change-Id: I7423cd4808e8df86960f225fd6e4a12a1a4f11f3
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QAbstractScrollAreaPrivate::layoutChildren() positions the viewport, but
did not take the overshoot from scrolling with a scroller into account.
If the scroll area was resized during a scroll, then this resulted in the
roll back overcompensating for the overshoot, placing the viewport outside
the visible area.
Fix this by taking the overshoot into account when positioning the
viewport.
Add a test case. We have to use QWindow-based mouse event simulation, as
the QWidget based move events use QCursor::setPos, which doesn't reliably
go through the gesture framework.
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-94769
Pick-to: 5.15 6.2
Change-Id: Idf650c91e5a9cffa996e23e743939243b1d4fcc0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test passes, the functionality is implemented in QCocoaWindow.
Task-number: QTBUG-8857
Pick-to: 6.2
Change-Id: I2f4b3a39cec1aaaf4351753b590f35e280503461
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- when there is no intersection between the current selection and the
spans collection, get ranges for all cells, just as if no span exists
- when there is an intersection between the current selection and the
spans collection, get separate ranges for each cell (as before)
This fixes the regular case of selecting multiple non-spanned cells
after some cells are merged (get a single range for all cells instead of
separate range for each cell). However, when selecting together a group
of spanned and non-spanned cells, you still get a separate range for
each cell. But this is normal behavior in similar applications; for
example in LibreOffice, you cannot select and merge spanned and
non-spanned cells: an error dialog tells you that it's not allowed.
Done-with: Christos Kokkinidis
Pick-to: 6.2
Fixes: QTBUG-255
Change-Id: Ic38f9a064a1f499825e7f750668013fc2dc564ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add operators as hidden friends, add test case to make sure that
basic value-type operations are possible with this type.
Task-number: QTBUG-255
Change-Id: I7fbf453aa16084c0b2a0079487cacb4e092ff664
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The skip-reason only cites Qt/X11. Convert the #ifdef into a platform
name check instead. The test also fails with the offscreen plugin, so
skip it for that as well.
Pick-to: 6.2
Change-Id: I49607b89f4b32359e81e1d9aadff2c3e03035c53
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDialog overrides setVisible to set focus on the default push button, or
(if there is no such button), make the first autoDefault push button the
default button. QDialog also explicitly sends a FocusIn event to the
focus widget in the dialog.
All this should not be done if the dialog does not become active after
getting shown, which will be prevented if the WA_ShowWithoutActivating
attribute is set.
Add a test case.
Fixes: QTBUG-8857
Pick-to: 6.2
Change-Id: If47021a4721a280ba45e95b43d0424cdacd9b4ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For a widget that implements height-for-width, the vertical scrollbar
becoming visible might be just enough to make the scrollbar unnecessary.
In that situation, the scrollbar flips on and off continuously.
To avoid that situation, make the width of the widget smaller until the
height fits without scrollbar, up to the point where we have space for
the scrollbar anyway.
The calcuation here is assumed to be cheap, but depends on the
heightForWidth implementation in the widget. Running the while-loop a
few dozen times should have no performance impact during resizing
and laying out the scroll area contents.
Add a test that confirms that within a brief period of time we only get
the one hide-event we expect.
Done-with: Zou Ya <zouya@uniontech.com>
Fixes: QTBUG-92958
Pick-to: 6.2 5.15
Change-Id: I0faeb5f9b1a226aada958c18333d9c2ac8203dd1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When setCurrentIndex is called by removeTab, the old current index
might no longer be valid. Only update the lastTab value of the new
current tab if the old current index is still valid.
As a drive-by, use the validIndex helper function.
Fixes: QTBUG-94352
Pick-to: 6.2
Change-Id: I945e2093a90a1fccbba86d32b1113f83fedd41de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
On a mobile device, selecting text in a line edit brings up the text
action popup for select/copy/cut. In a spinbox where the user changes the
value using the buttons, this can be very irritating, without providing
any usability - the user is unlikely to start typing, at least not
without first transferring focus into the lineedit first to bring up the
keyboard.
This style hint allows styles to override the default behavior of
QAbstractSpinBox. Implement the customization for the Android style, and
add a test case for QSpinBox.
[ChangeLog][QtWidgets][QStyle] A new style hint, SH_SpinBox_SelectOnStep,
specifies whether pressing the up/down buttons or keys in a spinbox will
automatically select the text.
Fixes: QTBUG-93366
Change-Id: If06365a7c62087a2213145e13119f56544ac33b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
On macOS, when showing a window, we decide if it should be made
key and therefore active, if the app has no active modal session
or if the window's worksWhenModal returns true.
However, the window needs to be made key also when a modal window
is present, but not visible. Add this condition when checking if
the window needs to be made key.
This makes the behavior consistent with what happens when a modal
is minimized on macOS. The input focus is passed to the next window,
and the window appears active, even if it can not be interacted with.
Fixes: QTBUG-85574
Pick-to: 5.15 6.2
Change-Id: I204d4f912128f4a46840789fc2ee08e1b2716bfc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Closing a window with a native child results in the native child's
QWidgetWindow being closed. That explicitly calls setVisible(false)
on the child, which will still have the ExplicitShowHide attribute
set from the initial (explicit) show. Even though we then reset
the ExplicitShowHide, the WState_Hidden attribute will still be
set, so Qt considers the window to have been hidden, and not show
it again when the parent becomes visible.
Add a test case.
Fixes: QTBUG-96286
Fixes: QTBUG-79012
Fixes: QTBUG-71519
Change-Id: I482e6d5236c959d82ce66798176b259a3176972c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Remove dead code
Make logic to position test widgets more consistent across test functions
Consistent cursor positioning logic
Get rid of unnecessary event processing
Reduce calls to qWait with hard coded values
Use qWaitFor to establish asynchronous preconditions
Ignore expected warning messages
Expect-fail (instead of blacklist or skip) some tests that always fail
Ignore unpredictable events in childEvents test
Split large "render" test in multiple test functions
Task-number: QTBUG-52974
Task-number: QTBUG-26424
Change-Id: I206e114c2c1d9801e08600d3341c2738dc881f17
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Item views can open an editor widget on the first key press, and need to
take special care not to break input methods. The initial key press
starts compositing by the system input method, which is then interrupted
by the focus transfer to the editor.
To solve this problem, the widget needs to keep focus while the initial
composition is ongoing, and only transfer focus to the editor once the
composition is either accepted or cancelled by the user. Add a state flag
that is set during this initial preedit phase.
During this initial composition, the item view will receive all input
method events, and needs to forward these to the open, but not yet focused
editor for the user to get the correct visual feedback during the preedit
phase. The item view also needs to report to input method queries on
behalf of the editor to make sure that the IM UI is correctly positioned
without covering the user input.
Implement a test that simulates the sequences through synthesized
QInputMethodEvents; we can't simulate the entire system input stack.
Fixes: QTBUG-54848
Change-Id: Ief3fe349f9d7542949032905c7f9ca2beb197611
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
At the current state, Qt::WA_StaticContents is not respected on any
platform, and optimizations for opaque widgets is not implemented on
Cocoa.
Task-number: QTBUG-73117
Change-Id: I48b7b0c4436da5a609fdbe51bb1c9789a2a059bd
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QWidget::setParent might be called to change the window flags, without
changing the parent. For those cases, we don't have to clear the focus.
Decouple the newParent state from the wasCreated flag. In most places
where newParent was tested, wasCreated was either tested previously and
can't be false anyway, or the code executed is irrelevant for widgets
that are not yet created (there can't be a paint manager). In the
remaining case, test wasCreated explicitly to maintain existing logic.
Add test for the cases where the previous code broke the focus, both
for QWidget and QDialog.
Fixes: QTBUG-93005
Pick-to: 6.2
Change-Id: I39dc179c2d348054de3927aa8b69eecef4935511
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The Cocoa QPA plugin no longer tracks popups, but dispatches enter/leave
events when popups show and hide. So the special handling in tests and
QWidgetWindow can go away now.
Change-Id: Ib6ef00689de231996e5e57ecdd8fd0d4c861d68b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since macOS doesn't give us any event when a modal window opens,
we need to do so ourselves explicitly so that the current mouse
window gets a leave event when e.g. a popup opens, and an enter
event when the popup closes again. The case for modal dialogs is
partially handled by QGuiApplication already.
Note: We cannot rely on the transientParent of the opening/closing
window, as it's nullptr for QMenu windows even if the QMenu has
a widget parent.
Add a test for enter/leave events when a secondary window opens,
covering both the dialog and the popup case. For the dialog case,
we sometimes get two Enter events when the dailog closes, which
we have to tolerate for now.
To make the test pass on b2qt platforms, fix the offscreen plugin
to explicitly send enter/leave events in the same way as Cocoa
now does.
Fixes: QTBUG-78970
Pick-to: 6.2
Change-Id: If45e43e625e8362c3502c740154f6a6a8962b9e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Dimitrios Apostolou
Volker Hilsheimer
Liang Qi
Shawn Rutledge
Zhang Yu
Yuhang Zhao
Alexander Volkov
Eskil Abrahamsen Blomfeldt
Zhang Hao
Li Xi
ChunLin Wang
Antti Määttä
Tor Arne Vestbø
Doris Verria
Qiang Li