When inserting rows to a branch with no columns
the tester should not complain about indexes being invalid
Pick-to: 6.1 6.0 5.15
Change-Id: I466f4e5140b10f6dcf65a71f109c2d3be7336507
Reviewed-by: David Faure <david.faure@kdab.com>
If you have a property myprop of type float, testReadWritePropertyBasics
would happily accept
testReadWritePropertyBasics(myObject, 1, 2, "myProp")
The test would then fail when setting bindings, as we would try to
install a binding of type int on a float property, which gets rejected
at runtime.
To prevent unexpected failures, verify that the types match before doing
any further checks.
Change-Id: I3893563fce0e11f9e20afa7c6a1e1fe0385382ab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Add a check that setting a binding on the read-only property has no
effect, nor does trying to change its value via such a binding.
Change-Id: Id7b55cd53256961faface7ef155225664cdee97a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When rows are removed from a model with no columns,
the test should not report a problem if indexes are invalid
Fixes: QTBUG-92886
Pick-to: 6.1 6.0 5.15
Change-Id: I7a042dfdb2575f87208a00cbed13db3869807f84
Reviewed-by: David Faure <david.faure@kdab.com>
This patch adds helper methods to test bindable properties in the QTest
lib. These methods can be useful in many Qt modules, so we decided to
have them in qtbase.
For now they are in the private header, because we are not sure that
they can be useful for the end users.
Task-number: QTBUG-89874
Change-Id: I6738728df1bcd895758008ef2ade0d3693802c3e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@insta.fi>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QT_TESTCASE_BUILDDIR was implicitly defined by Qt::Test target for
library users in Qt5. By default, this definition will point to
CMAKE_CURRENT_BINARY_DIR. This logic works similarly to qmake logic.
From user's perspective it might be useful to not rely on standard
search paths, but specify own. This can be done by setting the
QT_TESTCASE_BUILDDIR property for the user's target. CMake will
substute the value of the QT_TESTCASE_BUILDDIR property into the
QT_TESTCASE_BUILDDIR definition.
The implicit QT_TESTCASE_SOURCEDIR also seems to be useful. According
to the current logic, it points to CMAKE_CURRENT_SOURCE_DIR.
Fixes: QTBUG-92079
Change-Id: I8a9065f08e859c713b3c8cc08142a9ced0677770
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Section titles are valid targets for QDoc's autolinker. When
they are identical to other valid link targets, such as for
example a class, these sections may cause invalid links.
Pick-to: 6.0 6.1
Fixes: QTBUG-91141
Change-Id: Ie9a6258d2bf83932335976d8c0b5fc59f2028ae5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Allow passing command line arguments such as -AppleLocale, that override
user preferences for the test process.
Change-Id: I9e58e91fcb01a36f9d6c64ef52369308be5e95b5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Other affected rows have also been fixed．
Change-Id: Ie0a32f724bd2e40e7bfacfaa43a78190b58e4a21
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Pick-to: 6.1 6.0 5.15
Change-Id: I9d3f7ca2022b17559dd5bdd5c6bb8c85e89c3f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt is now always built with CMake.
The "cmake" keyword for QtTest blacklists remains for now. Removal is
tracked in QTBUG-90545.
Change-Id: I0011d56176a07c82698b2eb9aa330e77efa6cd34
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Add a qCompare() overload for qsizetype, preventing it
falling back to the slow code path pre-formatting expected/actual.
toString() should use the correct format from the already present
int-types (see macro TO_STRING_IMPL).
Complements 94aa350621.
Task-number: QTBUG-38890
Change-Id: Ieb8cea7de086141a2c80f93b4c1be01572be96df
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add an enumeration for system-out and alog element
for it. Redirect the messages types that are not warnings/errors
to this element. For compatibility, write it out only
if it is not empty. Rename enumerations and members accordingly.
[ChangeLog][QtTestLib] In JUnit XML, output that is
not a warning/error is now logged under <system-out>
instead of <system-err>.
Fixes: QTBUG-86540
Change-Id: I55598eafa7dafa486ac5a8221029c332ff47413b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
d25589e052 mistakenly changed the code
to use toString() from the QTest namespace. Call toString()
unqualified and move the compareSequence() helper out of the
internal namespace.
Fixes: QTBUG-89737
Pick-to: 6.0
Change-Id: I8452a0aead7771ad13a5b95438b54e202ccce76b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When debugging a spurious failure it's extremely useful to
run the test repeadtly into a debugger until a failure appears.
When that happens, one wants to immediately start debugging.
In so far, this has only been possible by placing breakpoints
inside Qt itself (when a failure is logged). Add another way:
an env variable, similar to QT_FATAL_WARNINGS, that makes
any failure fatal (terminate() gets called. Bonus: you can
control the termination handler!)
[ChangeLog][QtTestLib][QtTest] When the QTEST_FATAL_FAIL
environment variable is set to a non-zero value, a test
immediately aborts its execution. This is useful to debug
intermittent failures.
Change-Id: If2395f964ea482c30b8c8feab98db7fdee701cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The usual behavior for env variables is that any nonzero
value means "enable", so do the same for a couple of QTestLib
env vars. While at it: document them.
Change-Id: I854285df5d7af5be771f9d6532ddec5d8a6f8987
Pick-to: 6.0
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Q_MOVABLE_TYPE was conceived before C++ had move semantics. Now, with
move semantics, its name is misleading. Q_RELOCATABLE_TYPE was
introduced as a synonym to Q_MOVABLE_TYPE. Usage of Q_MOVABLE_TYPE
is discouraged now. This patch replaces all usages of Q_MOVABLE_TYPE
by Q_RELOCATABLE_TYPE in QtBase. As the two are synonymous, this
patch should have no impact on users.
Pick-to: 6.0
Change-Id: Ie653984363198c1aeb1f70f8e0fa189aae38eb5c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The Professional CMake book suggests always using explicit linkage with
target_link_libraries, so let's use that.
Whether to use PUBLIC or PRIVATE depends on the context. But let's
be conservative and advise on using PRIVATE by default.
Task-number: QTBUG-88935
Pick-to: 6.0
Change-Id: I12b80ee85be9f6916f1e4dea6b1c9cb29e03c20f
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tests can run faster now, but we still expect calculations based on
the timestamp (such as QEventPoint::velocity()) to be correct.
Change-Id: Ie962604c9ebd139384dcd89a157de66b4b773cc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These look like leftovers (API flaws).
Construction of QFileInfo from QString (or similar) should be not
implicit, as QFileInfo construction is expensive (might hit the file
system), and this may have users overlook APIs (for instance build a
QFileInfo out of QDirIterator::next(), instead of using ::fileInfo();
using QDir::entryList instead of entryInfoList; etc.).
Leave an opt-out mechanism to ease porting.
Fix a handful of usages around qtbase, with at least a couple of them
likely to be actual "sloppy" code.
[ChangeLog][Potentially Source-Incompatible Changes][QFileInfo] Most
QFileInfo constructors are now explicit. The
QT_IMPLICIT_QFILEINFO_CONSTRUCTION macro is provided to keep old code
working.
Change-Id: Ic580e6316e67edbc840aa0c60d98c7aaabaf1af6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The RegisterMethodArgumentMetaType had been changed to take a QMetaType
instead of a type id in 0161f00e50.
Unfortunately, the usage of it in QSignalSpy was missed. This patch
adjusts the metacall to correctly use a QMetaType.
Moreover, use parameterMetaType instead of parameterType to benefit from
metatypes which are already resolved at compile time.
Task-number: QTBUG-88260
Fixes: QTBUG-88356
Change-Id: Id8fa46581a005d62818971ea24d8aa2e39dcd6d0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The content in the porting guides are closer to a changelog than
a porting guide. At this point, it is easier for maintainers and
contributors to write in a changelog than a guide. This change
should help with readability and is closer to the usage of
"Changes" in documentation.
Part of a rename in other submodules.
Task-number: QTBUG-87156
Change-Id: Ib59de7976fae19e7b39962e80161df6628e4070b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Few breaking changes. Some things moved header, but as they didn't
change namespace, naming or signature, and the old headers now include
the 'new' headers, it is SC anyway.
Change-Id: I6b0556049f6d9203dcf7420317a14992fbe85a80
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Partial revert of 5866b82e24.
The function is still in the QTest namespace.
Change-Id: I5e25b405baf07e61781ca4a527601ef0bf8ce6a4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was ported to qsizetype after the cast was introduced
Change-Id: I00caff1d960f403990f93fcec6a7969e62b4cc99
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The non-versioned one's do miss some properties. It's therefore best
to not advocate using them.
Change-Id: I53645e65ed4de4e0100e59905c024cdfe40be0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The QT.<module>.DEFINES assignment in pri files needs to take into
account the module name when computing the define name. This is the
MODULE value that qmake specifies.
In CMake that would be the value of CONFIG_MODULE_NAME.
Previously the value of the define was computed in
qt_internal_module_info() without taking into account the module name.
While qt_internal_module_info() ended being used also for plugins and
other target types, the defines computed by it were meant to be used
only for Qt modules.
Thus remove the <result>_define assignment from
qt_internal_module_info and move its computation directly into
qt_internal_add_module, taking into account the value of
CONFIG_MODULE_NAME.
The only other use of module_define was in qt_internal_add_plugin but
that was merely a long overdue copy-paste error, qmake doesn't
propagate QT_FOO_LIB defines for plugins.
As result, a define special case in testlib is not needed anymore,
because the define is now computed properly.
Finally, QT_FOO_LIB should not be used while building the Qt module
itself, so instead of using PUBLIC_DEFINES option of
qt_internal_extend_target, use target_compile_definitions(INTERFACE)
directly.
Change-Id: I4d44f7461bac2f0c09aec3e995d02dfe36e00883
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Dynamic models which use fetchMore to asynchronously fill subdirs
(like KDirModel) return true in hasChildren() for dirs that are expected
to have children (so that the "+" shows in the treeview) but do not
actually have children readily available.
They will be inserted later on once the async listing job is done
(as a result of fetchMore triggering that job).
So QAbstractItemModelTester should use rowCount instead, to find out
if there are children present.
This detected a bug in QConcatenateTablesProxyModel: it returned
a non-zero rowCount for its items, while it's flat.
Change-Id: Idcdc86159f1fc79ed5297075dfcf30c09896287a
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Ensures that the backtrace is interleaved with the header and
footer that we print ourselves.
Change-Id: I728f4a05be31e345687cbb5fefe49f76dbe8ae36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Address an old ### Qt 5 comment. The method has been documented as deprecated
and replaced by QProcess::processId since at least Qt 5.9, so we can first
properly flag it as such for 5.15.2, and remove it from Qt 6 in a follow-up
commit.
Change-Id: Ic4e3351740617083b16723db8eef7a341bccfbf6
Pick-to: 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
addBFail() asserts on the file being non-null. The convention seems to
be "Unknown File" for cases where we cannot determine the file.
Change-Id: I3a4d0130352d77d75f264fad6f3bd47c6700ef4c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Change-Id: I53021781a25c141db5d5fc6771192cd8d6ed732a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This makes it easier to know which values to use in BLACKLIST files
for a flaky test, for example.
Pick-to: 5.15
Change-Id: I12af99d68f97e016aa42be9ae9d70de5fc0a58ed
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also add existing such docs to the new document group
Task-number: QTBUG-84051
Change-Id: I76f033f0846e09943f249d2beeb1606869eef382
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Some tests, particularly the asynchronous ones that depend on the
QTRY_*() macros, have call-backs in which a test can fail, but the
macro used to test for failure only returns from the call-back, so the
test doesn't know to fail.
Make sure the QTRY_*() macro gives up if that happens, so that the
test function at least gets control back and can notice that it's
failed. Even if they don't check, they'll fail sooner, where they
might otherwise have been stuck in a loop that would never exit until
the watchdog timer shoots the test down (and Coin ends up with a
debugger back-trace and no output from later tests).
Change-Id: I622a53117de5e97d23dd22e04e5cd20361a54651
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fix our API, so that QStringList and QList<QString> are the
same thing.
This required a bit of refactoring in QList and moving the
indexOf(), lastIndexOf() and contains() method into
QListSpecialMethods. In addition, we need to ensure that
the QStringList(const QString&) constructor is still available
for compatibility with Qt 5.
Once those two are done, all methods in QStringList can be moved
into QListSpecialMethods<QString>.
Change-Id: Ib8afbf5b6d9df4d0d47051252233506f62335fa3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change partially reverts change
a0e0b51001.
Replacing the QTest specific sleep function with QThread::msleep()
was not a good idea. The reason is that QThread::msleep() will force
the thread to sleep to x mseconds, even if a signal woke the thread
in the meantime.
This would cause qWaitFor() to not call processEvents(), in some cases,
leading to flakyness and test failures in tests that rely on timing,
such as the animation tests in Qt Qml.
Change-Id: I0ad132cdf32be5813b2e73552d772251fe1d7f89
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The inLoop boolean is unused, so remove it. At the same time, there is
another boolean that might just as well become a bitflag, so that we
can add more members in the future, should the need arise after all.
Since we then need to explicitly initialize the member, add a standard
QObject constructor.
Change-Id: I51245829c1b1192fde62592fb972da6ea2a88e11
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simply use QThread::msleep() to implement it.
Change-Id: I37c255fc70951715edc489d9f67669b01af380b1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends fe4794f70e
Depending on the types, the generic QTest::toString version might be
used, which returns nullptr.
Change-Id: Ic60675057181629d1cf9cb22e7508d57c026a0ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
High-DPI pixmaps are always enabled, and cannot be disabled.
Change-Id: I01a006b404e5431582b64ef812974c1c022b39ae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Better to provide the correct meta type to convert to.
Change-Id: I8e0d46e4ba482186201c157e302c03874bd38e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We extend configurejson2cmake to read the "commandline"
information from configure.json. This data is then translated to CMake function
calls and written it into commandline.cmake files.
We extend QtProcessConfigureArgs.cmake to pick up those commandline.cmake
files to feed our command line handling code, which is a
re-implementation of the command line handling in qt_configure.prf.
The command line handler sets INPUT_xxx variables, similar to
configure/qmake's config.input.xxx variables. The INPUT_xxx values are
translated
- to -DFEATURE_xxx=ON/OFF arguments if the input represents a feature,
- to corresponding CMake variables if such a variable is known,
- or to -DINPUT_xxx=yyy CMake arguments.
Configure arguments that have an entry in
cmake/configure-cmake-mapping.md are actually implemented. Other
arguments are likely to need more work.
Task-number: QTBUG-85373
Change-Id: Ia96baa673fc1fb88e73ba05a1afb473aa074b37d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The file src_qtestlib_qtestcase was built twice,
causing duplicate main symbols
Change-Id: I18750b87eee27603d9f56129fd6c30fddf4a4828
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
As defined by https://llg.cubic.org/docs/junit/
Change-Id: Ic7683f3d49c529674f8467d591528d4a65d3add8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The attributes are, like the elements, maintained in reverse
order in the underlying QTestCoreList, so we need to iterate
them backwards when printing out the resulting XML to reflect
the order they were added.
This results in e.g.:
<testcase name="passingBenchmark" result="pass">
Instead of:
<testcase result="pass" name="passingBenchmark">
Change-Id: Ic2eeab8de05ffedd0c41977358d5b40ff77878b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Instead of deferring the creation of the test suite until logging
stops, we create it up front, matching the logic of adding test
elements on test function enter.
Change-Id: I78b1ccdfde5493d78ef478d4b3c45d5a49358979
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simplifies debugging of issues where the watchdog thread is involved.
Change-Id: I4862167bca4a942c7d4319a9374f1f83f292d831
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
We don't want the signal dumper to pick up signals that our own
test machinery produces, such as the ones emitted from the watchdog
thread startup and shutdown. This would otherwise produce:
tst_Signaldumper::initTestCase() Signal: QThread(7fc969e0d870) started ()
At startup, and at shutdown even more confusingly:
tst_Signaldumper::UnknownTestFunc() Signal: QThread(7fc969e0d870) finished ()
Change-Id: I9e81fa168eaa92551d38d5576973bbf95ac23364
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make sure we can handle qsizetype as an integer when appending
test data. This is required for backwards compatibility with Qt 5,
so people don't have to rewrite all their test cases.
QCOMPARE can handle mixed types, tthe only method that requires manual
changes now is QTEST(list.size(), "testrow_expecting_int").
Change-Id: I40723b239e0160cefc05745aa35a75de8599ac08
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This change is motivated by the comment from bc087db59:
Qt 6: remove everything except QSpontaneKeyEvent::setSpontaneous()
Task-number: QTBUG-82978
Change-Id: I5f46ca366c193c06235f88022ec22c6848fbb7b0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also add a ; where it is missing.
Task-number: QTBUG-82978
Change-Id: Ic5d2a07363c25ab641d234baca89bc62238458cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Certain tests fail only on CMake configurations. We need the
capability to ignore these failures, without removing the
qmake-built-Qt coverage for now.
The keyword is enabled when Qt is built with CMake. So it doesn't
matter if the final test is built with CMake or qmake.
Task-number: QTBUG-85364
Change-Id: I157fe3d9254b589ef1e84022c01f4487ff834d27
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make QPair an alias for std::pair, and qMakePair just a forwarder
towards std::make_pair.
Why? Fundamentally to ditch a bunch of NIH code; gain for free
structured bindings, std::tuple and std::reference_wrapper
compatibility, and so on.
Breakages:
* Some that code manually forward declares QPair.
We don't care about it (<QContainerFwd> is the proper way).
* Some code that overloads on std::pair and QPair. Luckily
it's mostly centralized: debug, metatypes, testing macros.
Just remove the QPair overload.
* Usages of qMakePair forcing the template type parameters.
There are a handful of these in qtbase, but only one was actually
broken.
* std::pair is NOT (and will never likely be) trivially copiable.
This is agreed to be a mistake done by practically all implementations
in C++11, can can't be fixed without breaking ABI.
Some code using QPair assuming it's trivially copiable may break;
exactly one occurrence was in qtbase.
* QMetaType logic extracts the type names in two different ways,
one by looking at the source code string (e.g. extracted by moc)
and one via some ad-hoc reflection in C++. We need to make
"QPair" (as spelled in the source code) be the same as "std::pair"
(gathered via reflection, which will see through the alias)
when compared. The way it's already done e.g. for QList is
by actually replacing the moc-extracted name with the name
of the actual type used in C++; do the same here.
On libc++, std::pair is actually in an inline namespace --
i.e. std::__1::pair; the reflection will extract and store
"std::__1::pair" so we need an ad-hoc fix to QMetaType.
[ChangeLog][QtCore][QPair] QPair is now an alias to std::pair,
and does not exist as a class in Qt any more. This may break
code such as functions overloaded for both QPair and std::pair.
Usually, the overload taking a QPair can be safely discarded,
leaving only the one taking a std::pair. QPair API has not changed,
and qMakePair is still available for compatibility (although
new code is encouraged to use std::pair and std::make_pair
directly instead).
Change-Id: I7725c751bf23946cde577b1406e86a336c0a3dcf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove '/' as an example directory. We do not want to retrieve the
directory tree of the entire system.
Change-Id: I1caa7ef659dfe326515a4d81193682dacb373856
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Please use qt_windows.h instead, so we avoid having min/max defined.
Change-Id: Ic1b29666c427bf24556da5494af45ee5953ae827
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Qt 5.4 is not documented anymore since quite some time.
Change-Id: I6811ead502178f7acbed8cf450e42d7fd33ae29b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QTest::toString allocates memory by calling qstrdup; that memory must
be freed by the caller.
Change-Id: I218bc57b3312fdd9195fb49eaed7d20df4bf717c
Fixes: QTBUG-84081
Coverity-Id: 186979
Covierty-Id: 186980
Pick-to: 5.15
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The message to ignore is given in source code, hence UTF-8; it was
being ingested as local 8-bit, which lead to problems when a debug
message wasn't 7-bit clean and the system's native encoding wasn't
UTF-8. Modified QtTest's selftest to check encoding failure.
Pick-to: 5.15
Change-Id: I898744a450115b6d2ee992f1d3b36d8efaeeff7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The widget snippet was sometimes ignored, because the printsupport
dependency was not explicit in the top-level src.pro file. This lead
to a situation that, if printsupport by chance was already built,
it was tested, otherwise silently ignored.
This shows that having requires(qtHaveModule()) inside src/ is actually
harmful, and they are therefore removed from snippets.pro. Also, the
dependencies for the snippets projects are now moved to a central place
so that the correctness is easier to check.
Pick-to: 5.15
Change-Id: Ice051fa04848040e206c78361fbbcf680383c6b2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
We hope this shall avoid some flaky failures noticed in quick tests,
e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was
recently seen failing with 3.88e-11 != 0. This required some revision
to test data in the testlib selftest for floats; the resulting
expected output differs in details but not in which tests pass or
fail. QEMU, naturally, made life difficult, requiring special-case
code in the test-driver.
[ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as
equal when qFuzzyIsNull() is true for both of them.
Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Fixes
error C2124: divide or mod by zero
when compiling the test code (enabled by
713cd83200).
Pick-to: 5.15
Change-Id: I2ae39426fc0012f79714ff3d6484d792cab4bd92
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
This amends b3e4be2d8b.
When building testlib with QtGui linked:(use "QT = core-private gui"
in src/testlib/testlib.pro)
Undefined symbols for architecture x86_64:
"QAbstractItemModelTester::verify(bool, char const*, char const*, char const*, int)", referenced from:
QTestPrivate::testDataGuiRoles(QAbstractItemModelTester*) in qabstractitemmodeltester.o
Change-Id: Ideb10ddd6717fed8d9f91f75bbfc9d5a22104730
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This patch adds the equivalent of testlib's selfcover.pri and is enabled
for both testlib and the respective selftests test.
This patch also fixes the selftests so that they can run without
FEATURE_testlib_selfcover enabled.
Change-Id: I15913de2d572ac79804ce3e652cee66de74318f8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The command is deprecated and has no effect apart from generating
a documentation warning.
Change-Id: I30871bfd6975f8268930cce99993a8579242fdb8
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Takes care of the first round of todos and deprecations for Qt6 in
qevent.
Not touching anything that might interfere with changing the class
hierarchy as the file also suggest.
Change-Id: If72d63d8932f1af588785bf77b34532358639a63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
The built in crash reporter on macOS will by default not show the
dialog if the application is not one that will run in the foreground.
Change-Id: I0020520ae2f14a0e2f84fdca1d80ec6fe1247ffd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we had one test function that just did
tst_Mouse::f1()
{
QTest::mouseMove(w, QPoint(0,0));
}
and another test function that did
tst_Mouse::f2()
{
QTest::mouseMove(w, QPoint(500,500));
}
their corresponding event timestamps were only 1 apart from each other.
This meant that any code that tried to estimate the velocity of a mouse
cursor would get a really high velocity estimate inside f2(). This would
come as a surprise to most people. So to avoid this, we add a 500 ms
timestamp delay between each test function call.
In theory this could also prevent generating a mouseDoubleClickEvent
when a pair of test functions containing a press-release sequence was
run, but there is a separate pre-existing mechanism to handle that case.
Change-Id: Icd4fc35853c09f080466d22411208c7b5c4174b5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The reporter was probably named 'xunit' based on the historical use of
xUnit to refer to testing frameworks derived from Smalltalk's SUnit.
These frameworks typically added their own prefix, e.g. JUnit for Java,
RUnit for R, etc.
The most popular of these was the JUnit framework, and the corresponding
XML output produced by the Ant built tool became somewhat of a de facto
standard, which is probably why we chose to model our reporter after it.
Nowadays however, naming it 'xunit' is problematic as there is actually
a testing famework named xUnit.net, typically shortened to, you guessed
it: xunit.
Test report consumers will typically have a junit mode, and an xunit
mode, and the latter could easily be mistaken for what testlib outputs,
unless we clarify this.
The clarification also allows us to safely extend our support for the
JUnit XML format to incorporate some elements that are nowadays common,
but where we are lagging behind the standard.
[ChangeLog][QTestLib] The formerly named 'xunitxml' test reporter has
been renamed to what it actually is: a JUnit test reporter, and is now
triggered by passing -o junitxml to the test binary.
Change-Id: Ieb20d3d2b5905c74e55b98174948cc70870c0ef9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Luca Beldi
Andreas Buhr
Fabian Kosmale
Sona Kurazyan
Ivan Solovev
Alexey Edelev
Nico Vertriest
David Faure
Paul Wicking
Samuli Piippo
Tor Arne Vestbø
Venugopal Shivashankar
Hou Lei
Liang Qi
Joerg Bornemann
Friedemann Kleint
Christian Kandeler
David Skoland
Giuseppe D'Angelo
Kai Koehne
Mitch Curtis
Topi Reinio
Jerome Pasion
Shawn Rutledge
Volker Hilsheimer
Mårten Nordheim
Alexandru Croitor
Lars Knoll
Allan Sandfeld Jensen
Ulf Hermann
Edward Welbourne
Morten Johan Sørvig
Andy Shaw
Thiago Macieira
Jarek Kobus
Lars Schmertmann
Oliver Wolff
Qt Forward Merge Bot
Martin Koller
Tor Arne Vestbø
Leander Beernaert
Simon Hausmann
Jan Arve Sæther
Linus Jahn