This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CI metrics show that this test was flaky ~38 time in 3 days.
The problem is old: after we get a surface, a window manager can still
decide to re-position the window.
The fix is to simply send the touch event in a position where it is sure
to hit the window (usually the offset is the title bar height).
The blacklisting seems to not have worked, I could reproduce the failure
on a linux/xcb machine.
Change-Id: I5229fe020ba75c984fd3b6c322ad00d769707573
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The usual:
- delete return values of QLayout::takeAt(), replaceWidget()
- delete styles
- delete top-level widgets
- delete actions
Either by naked delete, QScopedPointer or allocation on the
stack instead of the heap.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/widgets/kernel.
Change-Id: I8cc217be114b2e0edf34ad8d60dbf722f900bb7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by UBSan:
tst_qapplication.cpp:1754:48: runtime error: member access within address 0x7ffda11f2220 which does not point to an object of type 'SpontaneousEvent'
0x7ffda11f2220: note: object is of type 'QMouseEvent'
The code attempted to model the layout of a QEvent with another class
that allows public access to the memory location that (hopefully)
corresponds to QEvent::spont, gaining access by casting a QEvent
object to that specifically-crafted class.
Fix by the using the existing QSpontaneKeyEvent::setSpontaneous()
call, which, despite its name, works for all QEvent subclasses, and
which has already been fixed to not invoke UB (in bc087db).
Change-Id: I7db8b8a8a823f7d61ab17375142d19dc3874fea5
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If QT_NO_LIBRARY isn't set we cannot test QCoreApplication's library
path functions and none of the plugin and library related tests are
applicable. Also, examples that rely on dynamic plugin loading for
their core functionality obviously don't work.
Change-Id: I2d381ee1bc8d944e1181557895a7e92a364fd778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Two (?) tests can fail: what they actually try to test is that our application
quits on the second single shot timer (2 s. timeout) and not on the first one
(timeout 1 s.) - on the first timeout we either ignore event, or we still have another
window and should not quit yet, on the second timeout we actually do quit the app.
The test checks this in a quite fragile way, counting the number of timeouts for the third 100 ms
timer. It looks like on OS X (VM-only) there is some delay (~500-600 ms) before we receive the
first timeout so the count is always 14 or less, making the test to fail.
Change-Id: I9e8728e6c956025d91528f4195982767a5d3d320
Task-number: QTBUG-46164
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Make styleHints a static member variable of QGuiApplicationPrivate and
fix accessor accordingly. Extend tst_QApplication::settableStyleHints()
to run without QApplication instance as well and add a similar test
to QGuiApplication.
Task-number: QTBUG-44499
Change-Id: I42b92ef38f7dd512d08d70accfa7dd4f09a22f01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Currently Qt uses the QPlatformIntegration::StyleHint
SynthesizeMouseFromTouchEvents to check whether to synthesize mouse
events from touch events. But not only platform plugins can produce
touch events, they can be created by e.g. QTest::touchEvent() and in
this case we almost definitely need synthesizing regardless of the
platform.
This commit introduces a QTouchDevice::MouseEmulation capability which
replaces use of the QPlatformIntegration::SynthesizeMouseFromTouchEvents.
So it's possible to pass QTouchDevice without this capability to
QTest::touchEvent() and be sure that mouse events will be synthesized.
Notice that touch pads always emulate mouse events.
As a result we can activate some tests which were disabled for specific
platform configurations by commits 6c1670d8c2
and e9760f1559.
Change-Id: Idc82fa4007a095fc1cb5934979361b0023d2b793
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The QPanGesture recognizer requires single-point touch events. The touch
implementation in Qt 4 would test Qt::WA_TouchPadAcceptSingleTouchEvents
and forward single touch events if set.
Making this work in Qt 5 is a little bit more involved since the platform
plugins don't know about widgets.
Change the Cocoa touch implementation to send single-point touch events
to QWidgetWindow windows only. Make QApplication forward single-point
touch events only if the target widget has the
Qt::WA_TouchPadAcceptSingleTouchEvents attribute set.
Task-number: QTBUG-35893
Change-Id: I68712a5e3efb4ece7a81ca42f49c412e525eeb3a
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
When clicking on a widget currently focused, w/o having Qt::ClickFocus
set as focus policy, the focus should stay on the widget and not get
propagated to the widget's parent.
Task-number: QTBUG-34042
Change-Id: I53f1153829cc7228de02a90e38125b5cf4ee5008
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Introduce QStyleHintsPrivate and introduce internal
setters called by QApplication.
Task-number: QTBUG-33991
Change-Id: Id61f8b1e2b5c9cfd7b4713aaded66e93e6f63719
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Instantiate widgets on the stack to ensure they are destroyed
when the QApplication instance goes out of scope.
Introduce waitForWindowExposed() to make sure events are in sync.
Task-number: QTBUG-32125
Change-Id: Ia54e2fa9a7c2e279353c4514a6735e326edf35ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Unit test by Friedemann Kleint <Friedemann.Kleint@digia.com>
Task-number: QTBUG-31569
Change-Id: I526d33d4f88a41f6ac349098476bc45af6c841b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove redundant includes, remove references to deprecated
QApplication::GuiServer (passing that has no effect anymore), and use
QStyleFactory instead of referencing QWindowStyle directly (about to
become an internal class).
Change-Id: I08f94993a55ce6039c7694d8f7019cbd53594edc
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Added ThemeHint::TabAllWidgets as a mean to access that platform
specific bool. The default implementation returns always true when
querying QPlatformTheme::themeHint().
Several auto-tests had to be updated to reflect for qt_tab_all_widgets'
type change. One XFAIL removed from tst_QApplication::focusChanged().
Task-number: QTBUG-24372
Change-Id: Ie1f0486c19898fe54c53aa4a27e378485075e512
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The tst_QApplication::args() auto-test sets the style to windows style
but there is no way to reset the style back to the native one. This
makes tst_QApplication::focusChanged() fail on Mac in some cases,
since not all the styles respond the same way to tab vs. strong
focus changes.
Change-Id: I91e39c1dd0fad4d90f3a13ab50a5e9758922ac28
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Commit 7808ec79 changes QApplication to synthesize
mouse events from (unhandled) touch events.
On Mac OS X this creates a conflict for two-finger
scroll swipes, which generates both touch events and
mouse wheel events: scrolling in QTextEdit will also
select the text.
Add a SynthesizeMouseFromTouchEvents platform style
hint that enables the event synthesising. Set to true
by default and false in Cocoa.
Change-Id: I1ffa5a141476aa38b81ce92a87eff676c7ec2276
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).
Also remove the qmake hack that adds private headers to all tests
Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This patch implement the equivalent of
468626e99a90d6ac21cb311cde05c658ccb3b781 in qtdeclarative but for
QtWidgets.
If a widget doesn't accept a touch event, then QApplication gives it
another try by synthesizing a corresponding mouse event. This way
QtQuick and QtWidget behave in a similar way, removing the need for
platform backends to try to emulate a mouse event from a touch event
unconditionally.
Also add relevant unit tests and adjust old QApplication ones.
Change-Id: Iddbf6d756c4b52931a9d1c314b50d7a31dbcdee9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
A virtual method was reimplemented to return an always-empty string,
probably a leftover from a refactoring.
This fix showed that tst_qwidget_window was buggy: between Qt4 and Qt5,
a "Before" became "After", which made "Before" unused, and was masking
the fact that the app name was empty by default. In addition, the
earlier Qt5 change that made the app name default to argv[0] now requires
updating this test, now that it's actually working.
Change-Id: I5360026821a9b95bedd0ff09dba3d51a22e542b7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
We need to let the QGuiApplication determine whether quitting is appropriate
based on whether there are visible top level QWindows after the last top-level
QWidget was closed.
This solves the issue raised here: http://thread.gmane.org/gmane.comp.lib.qt.user/1880
The transientParent is the QWindow equivalent of parentWidget on QWidget, so the test
in QGuiApplication::shouldQuit is similar to the one in QApplication::shouldQuit.
Change-Id: I500eff8d5887f24415180134b3a4be3c630a896f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Use this to store the loop-level counter needed by QCoreApplication
when determining when it is safe to delete an object.
This removes the hack to hijack the QEvent::d pointer (even though
the pointer is unused).
Change-Id: I91c0b1aa00235ec6e13feb30bf928e56d2f80026
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since it deals with paths, let's use the proper path-handling
functions.
Change-Id: I896d2c472dfd675e9ff247657447178702f178be
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Part of this test was skipped on Mac OS X, due to a bug in timer
handling. This bug has been fixed[1] and the test now passes again.
[1] https://codereview.qt-project.org/#change,21953
Task-number: QTBUG-24319
Change-Id: Iad0a315cfdfcfb007e8aa9243cfef4b2f2b33895
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Screens need to be destroyed in reverse order to ensure the primary
screen stays valid when other screens are destroyed.
Task-number: QTBUG-24300
Change-Id: I9d9d710aa67ec045baa8bf292833ffe7d9eea935
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QFINDTESTDATA to locate the helper applications.
Change-Id: I604d10e37c9367f2e95225864edf5bf705f1d961
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The tab key behavior in Qt5 no longer respects the "Text boxes and lists
only" tab navigation option in OSX, which is the default. This is a
regression since Qt4.
Task-number: QTBUG-24372
Change-Id: I54c1663f8fb259dd847083432102a0bfad7dd69c
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Change-Id: I70c324e6fcfd2bba3ab44837c5ce2c007de8896f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The first block of tst_QApplication::quitOnLastWindowClosed() hangs
on Mac OS X, so skip that block for now.
tst_QApplication::testDeleteLAter() both hangs and fails on Mac OS X,
so skip the test and XFAIL the failure.
Task-number: QTBUG-24318
Task-number: QTBUG-24319
Change-Id: Ice11292d84e63215f1bb9e03f3ef369943d1d887
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Liang Qi
Oliver Wolff
Kari Oikarinen
Christian Ehrlicher
Kevin Funk
Friedemann Kleint
Lars Knoll
Stephan Binner
Frederik Gladhorn
Ulf Hermann
Tor Arne Vestbø
Marc Mutz
Shawn Rutledge
Friedemann Kleint
Jani Heikkinen
Liang Qi
Maurice Kalinowski
Ulf Hermann
Morten Johan Sørvig
Simon Hausmann
Nico Vertriest
Oswald Buddenhagen
Timur Pocheptsov
Shawn Rutledge
Alexander Volkov
Matti Paaso
Morten Johan Sørvig
Friedemann Kleint
Oswald Buddenhagen
Frederik Gladhorn
Christoph Schleifenbaum
Maurice Kalinowski
Andrew Knight
Stephen Kelly
Debao Zhang
Axel Waggershauser
Pasi Petäjäjärvi
Sergio Ahumada
J-P Nurmi
Gabriel de Dietrich
Jens Bache-Wiig
Mitch Curtis
Iikka Eklund
Morten Johan Sorvig
Paul Olav Tvete
Thiago Macieira
Friedemann Kleint
Kevin Ottens
David Faure
Rohan McGovern
Kurt Korbatits
Oswald Buddenhagen
Bradley T. Hughes
Debao Zhang
Kevin Krammer
Miikka Heikkinen
Jason McDonald