To enable setting a default priority for all requests to a given site.
Fixes: QTBUG-121669
Change-Id: Icd8a9c59e4afb0432c65f84cc8115ae0c7f85506
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
1XX statuses are not final statuses, and testing 'error' on it is not
necessarily very meaningful. Furthermore the internal handling of
these statuses changes in Qt 6.8.
Fixes: QTBUG-108068
Pick-to: 6.7
Change-Id: I9c18c579cd310266273eccd2aee2e032f60538e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Make QNetworkAccessManager to discard all informational (1xx) replies
from HTTP servers with the exception of 101.
According to RFC 9110:
"A client MUST be able to parse one or more 1xx responses received
prior to a final response, even if the client does not expect one.
A user agent MAY ignore unexpected 1xx responses."
Status code 101 is an exception because we use it to upgrade to http2
cleartext when it is enabled.
Fixes: QTBUG-108068
Change-Id: I415ff053180a43f0c7ff1b4b2a60fd114ce08ac9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
This test uses socketpair which is not available on vxworks, so it fails
to compile.
Task-number: QTBUG-115777
Pick-to: 6.7
Change-Id: I46f3b4ebd937dc4ca2511381dd58451434e6a2fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I've noticed that on some Windows systems, the resolver refuses to
resolve IPv6-only addresses. But it can still do reverse resolution from
IPv6.
Change-Id: I5dd50a1a7ca5424d9e7afffd17adfe739ded932e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our ideal scenario was to run python to run its getnameinfo()... so just
use getnameinfo() directly. This also avoids the problem of Python not
being present and our falling back to nslookup.
Pick-to: 6.7
Change-Id: I5dd50a1a7ca5424d9e7afffd17adfc830386306f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Instead of separate QJsonObject and QJsonArray types.
Resulted from API-review
Pick-to: 6.7
Change-Id: I977d692d3709a8c3aa872683ddda54a143c25e67
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This naming should make it clearer that (successful) calls to
readJson(), readBody(), and readText() consume the data received
so far.
Resulted from API-review
Pick-to: 6.7
Change-Id: I09ca9eac598f8fc83eecb72c22431ac35b966bf5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Note: documentation will be updated in a follow-up commit
This commit makes QRestReply and QRestAccessManager
classes lighter, non-owning wrappers. Furthermore their
APIs don't duplicate the wrapped QNetwork* APIs.
This makes it easier to use / opt-in to these helpers
in pre-existing applications which are based on
QNetworkAccessManager and QNetworkReply.
Since APIs are no longer duplicated, the QRest
classes are more obviously a convenience _wrapper_,
as opposed to being an alternative vertical stack.
In practice this change consists of:
- QRestAM never instantiates QNetworkAccessManager,
but accepts it via constructor. It does not take
ownership of the QNetworkAccessManager.
- QRestReply accepts QNetworkReply via constructor. It
does not take ownership of the QNetworkReply
- Signals and most duplicated functions are removed
from both QRestAM and QRR.
- QRestReply is no longer a QObject
- Since QRestAM doesn't have much to report anymore,
the debug operator is dropped.
Resulted from API-review
Pick-to: 6.7
Change-Id: Ib62d9cc2df41cac631396a84bb7ec4d2d54b0c8c
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Version 883ced078a83f9d79a98933145425c221a5e51f0, fetched on
2024-01-25.
[ChangeLog][Third-Party Code] Updated the public suffix list to upstream
SHA 883ced078a83f9d79a98933145425c221a5e51f0.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Task-number: QTBUG-121325
Change-Id: I95e82b5c351218c1641e11e7a166ae21be2c5ad6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It is needed for proper inet socket address working
on this platform.
Pick-to: 6.7
Task-number: QTBUG-115777
Change-Id: Icde7ff7baf257762339f5f72a783c92f6b297a46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code did not handle the path where we didn't have a challenge.
We cannot recover from that so we just have to fail the request.
Amends fe1b668861
Pick-to: 6.7 6.6 6.6.2 6.5 6.2
Fixes: QTBUG-121515
Change-Id: Ie39a92e7439785a09cad28e8f81599a51de5e27f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QHttpHeaderParser::headers() method is changed to return QHttpHeaders.
QAuthenticatorPrivate::parseHttpResponse() method is changed to work with QHttpHeaders.
QHttpNetworkHeader::header() method is updated to return QHttpHeaders.
Tests are updated.
Task-number: QTBUG-120133
Change-Id: I20a18b509acd7a8b8d93884cff8349519d64293e
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
We need a way for users to consume the complete contents of
QHttpHeaders.
Until now, the only way was
for (const auto &name : h.names())
use(h.value/combinedValue(name));
which is quadratic.
Adding the usual iterators and operator[] would require us to
expose the underlying value_type, which we're not ready to do, yet.
So we added nameAt() and valueAt() functions in previous commits to
enable efficient indexed iteration without the need to expose a
value_type. Having added those, we can now remove names(), which had
the wrong value_type (QByteArrays are by definition UTF-8 in Qt, while
header names are L1), and is no longer needed to facilitate iteration.
In QNetworkRequestFactory, temporarily use toMultiMap() because we
need the combinedValue() of all headers here. The fix will be to make
QNetworkRequest QHttpHeaders-aware, but that's a Qt 6.8 thing, even
though we should still de-pessimize this code for Qt 6.7 with private
API.
Resulted from API-review.
Pick-to: 6.7
Change-Id: I65086ef4c62e22554ae7325a846bebc08b44916f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We need a way for users to consume the complete contents of
QHttpHeaders.
For now, the only way is
for (const auto &name : h.names())
use(h.value/combinedValue(name));
which is quadratic.
Adding the usual iterators and operator[] would require us to
expose the underlying value_type, which we're not ready to do, yet.
So add nameAt() and (in a previous commit) valueAt() functions to
enable efficient indexed iteration without the need to expose a
value_type.
Return by QLatin1StringView, not QAnyStringView, because that
statically encodes the actual encoding used (and required by HTTP
specs and promised by the class documentation, so it won't need to
change). For the setters, we want to be accomodating QString,
QByteArray, etc, which is why those take QAnyStringView.
Resulted from API-review.
Pick-to: 6.7
Change-Id: I0153c5aad0f6260b5dbc963de0aaf4ef42fdd4f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
We need a way for users to consume the complete contents of
QHttpHeaders.
For now, the only way is
for (const auto &name : h.names())
use(h.value/combinedValue(name));
which is quadratic.
Adding the usual iterators and operator[] would require us to
expose the underlying value_type, which we're not ready to do, yet.
So add valueAt() and (in a follow-up) nameAt() functions to enable
efficient indexed iteration without the need to expose a value_type.
Resulted from API-review
Pick-to: 6.7
Change-Id: I863f59618cea5682386ce26b66b4b1655eac7950
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
A QMultiMap is used, while only qset.h is included.
FTBFS w/o precompiled headers.
Include qmap.h as well.
Pick-to: 6.7 6.6 6.5
Change-Id: I5f6e1d204bfa94cc6a81f6883c7a7b0ee1e9963c
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
For use in QtGRPC.
There is some duplication between this code and the code in
QHttp2ProtocolHandler. But let's not change the implementation of
the protocol handler after the 6.7 beta release. Nor do I think we
should do it for 6.8 LTS. So let's just live with the duplication
until that has branched.
Pick-to: 6.7
Fixes: QTBUG-105491
Change-Id: I69aa38a3c341347e702f9c07c27287aee38a16f2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This test doesn't fail anymore on CI.
Task-number: QTBUG-90545
Change-Id: I3ccf5a4378ba48e0b1e3ce81b0fdd8ab010f75a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There's several ways to compare HTTP headers, and arguably
the need for it is not very high. For the time being users can use
different accessors and compare in ways that make sense for
their use cases.
Consequently since HTTP headers are no longer trivially comparable,
it makes also comparing the request factories more 'moot' because
headers are a central piece of request information. So removed
comparison from request factory as well.
These comparisons can be restored later if a clear understanding
on it's need, and on how it should be best done, emerges.
Resulted from API-review
Pick-to: 6.7
Change-Id: Idb5ab3710268b52a8e59656db8cc7de82f0ae511
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The json return type and function naming has gone back
and forth. Let's go with QJsonDocument after all, and add new
overloads in future if necessary.
Pick-to: 6.7
Task-number: QTBUG-119002
Change-Id: I3f9de0e6cba7d5c52d016d252d65b81f345af050
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Provides the possibility to read text data as it arrives, instead
of needing to wait until the whole body is received.
Pick-to: 6.7
Task-number: QTBUG-119002
Change-Id: I64f90148fd41a77c4ae2d5dbd6194a924a9f3a86
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The vast majority of header fields appear only once, but there was no
efficient way to get that value: values() returns as a
QList<QByteArray> (allocating) while combinedValue() returns a
QByteArray constructed from values().join() (also allocating).
It follows that the QHttpHeaders API is incomplete (lacks an efficient
basis of operations in EoP terms).
Add a value() function that returns either the value or a
user-provided fall-back as a QByteArrayView. Unlike values() and
combinedValue(), this function can be noexcept, greatly improving
codegen for callers.
Found in API review.
Pick-to: 6.7
Task-number: QTBUG-107042
Change-Id: I2da20815fd46fdd7f150c224f41eee53abed313e
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Clean up the C'n'P in the test a bit before adding tests of new
functions.
Pick-to: 6.7
Task-number: QTBUG-107042
Change-Id: I2da20815fd46fdd7f150c224f41eee53abed313d
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was forgotten when we originally fixed the hardcoded 1_1 version.
Pick-to: 6.7 6.6 6.5
Change-Id: Iff3148d79466dac2830fe9a63d954aead96fb0ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It is somewhat common HTTP method with RESTful use cases
(partial updates on resources)
Task-number: QTBUG-114637
Change-Id: Id252d3f4b54c3ebb8df5c93259e64a4af2d0ca2f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added to both QNetworkRequestFactory and QRestAccessManager
Task-number: QTBUG-114717
Change-Id: Ibca55bba548a034a0da7ea60550642c150b63dc2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Provide users with means to use more modern time/duration type.
Please note that since QTimer does not currently support
timeouts larger than 'int' milliseconds, the limit on how long
durations can be expressed, remains. This should not
be an issue in practice with network requests, as a typical
int32 system can express timeouts of ~24 days.
[ChangeLog][QtNetwork][QNetworkAccessManager] Add std::chrono
support for transfer timeout.
[ChangeLog][QtNetwork][QNetworkRequest] Add std::chrono support
for transfer timeout.
Fixes: QTBUG-118714
Change-Id: If85678a5994c59bac5926e47f98c9cfeb2a07c30
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
These include:
- readyRead(), signal for indicating new data availability
- bytesAvailable(), function for checking available data amount
- downloadProgress(), signal for monitoring download progress
Task-number: QTBUG-114717
Change-Id: Id6c49530d7857f5c76bd111eba84525137294ea7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The class provides a way to represent server-side service endpoints.
With RESTful applications these endpoints typically have a need for
repeating requests fields such as headers, query parameters,
bearer token, base URL, SSL configuration. This class allows setting
of the repeating parts, while allowing the setting of changing parts
on a per-request basis.
[ChangeLog][QtNetwork][QNetworkRequestFactory] Added a new convenience
class to help with the needs of repeating network request details
imposed by the server-side service endpoints, which is common
with RESTful applications.
Task-number: QTBUG-113814
Change-Id: Iabcfaed786949ffbb0ad0c75297d0db6ecc1a3cc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
New QHttpHeaders class for use in place of
std::pair<QBA,QBA>, QMap<QBA>, and QMultiMap/Hash<QBA,QBA>
to represent HTTP headers.
[ChangeLog][QtNetwork][QHttpHeaders] New QHttpHeaders class
Task-number: QTBUG-107042
Change-Id: I54766886a491acfc9a813a3414322a75011acb9d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It previously had to kludge a 1900-to-1999 date into a 1950-to-2049
range; it can now tell QDTP to do that for it. In particular, this
fixes a problem with 00-02-29, which failed to parse using 1900 as
base year so couldn't be corrected to 2000-02-29, which is now the
date it finds directly.
Task-number: QTBUG-46843
Change-Id: I7ac936bdfb15b78daed5d237c5d921c800af4951
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove the following CIs from BLACKLIST files as they are no longer
used:
- msvc-2015
- msvc-2017
- windows-7sp1
- opensuse-42.3
- ubuntu 16.04/18.04/20.04
- rhel 6.6/7.4/7.6
- redhatenterpriselinuxworkstation-6.6
Change-Id: Ief9550e3455a1ed211d978933262c8d5557b0fec
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
It fails frequently. Might have to blacklist the entire test case, or
even skip when running on qemu, if this doesn't help.
Task-number: QTBUG-119616
Pick-to: 6.6
Change-Id: I446612c0fb5b2afc021aeb2fab9be010ac071acd
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
When SSL backends were broken out as plugins, various tests were
suppressed since the code they test is now in a plugin, no longer part
of the network libraries.
The ASN.1 test is, however, fairly self-contained, so just compile it
with the relevant plugin sources (which are likewise self-contained)
and brute-force the paths to line up for the test.
Task-number: QTBUG-46843
Change-Id: I778489e68b7361a7fd55c88d2a35257ad6a58c46
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Mårten Nordheim
Juha Vuolle
Mate Barany
Tasuku Suzuki
Lucie Gérard
Łukasz Matysiak
Thiago Macieira
Tomasz Kozłowski
Lena Biliaieva
Axel Spoerl
Joerg Bornemann
Marc Mutz
Edward Welbourne
Christian Ehrlicher
Volker Hilsheimer