Using REQUIRED as a prefix instead of suffix works better with
OPTIONAL_COMPONENTS, and is also the order in the CMake manual.
Task-number: QTBUG-98867
Pick-to: 6.2
Change-Id: I1ab68408b95d8edf06272a3b9fceccd8d8e597fc
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
QXmlDocumentLocator was introduced, so that QDomBuilder can work with
both QXmlStreamReader and QXmlInputSource. It had two subclasses -
QDomDocumentLocator and QSAXDocumentLocator, to allow getting line and
column numbers while parsing, depending on the implementation.
QSAXDocumentLocator was removed when removing SAX-based implementation
(79e0374143), and now it doesn't make
sense to keep QXmlDocumentLocator/QDomDocumentLocator, we can get line
and column numbers form QXmlStreamReader directly.
Change-Id: I75f4a776472ee31ddc3685a999f356be9bf47ac5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The command-pair was recently deprecated.
The replacement code should produce an output that is equal to the
previous one.
Task-number: QTBUG-98499
Change-Id: If26e0d85a174ebc3858b638c34d7f43637eab46d
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This restores the Qt 5 behavior in Qt 6, but prepares for disabling it
in Qt 7. We want to deprecate the current behavior, as it makes it
unclear who is responsible for calling close.
Fixes: QTBUG-97747
Pick-to: 6.2
Change-Id: I2c99eb96667e784576d8850085068ca334d75b16
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This should restrict changes that
introduce new warnings.
Change-Id: I7e4b5d9d5d84b7c336509c380bc7e6d86e360f4a
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
customFilters defined in .qdocconf are not supported anymore by Qt
Assistant since Qt 5.13. Therefore remove them from all .qdocconf files,
also to avoid cargo-culting them to new help modules.
Task-number: QTBUG-95987
Change-Id: I664391460637d2e859348da0338e1a4a3ee9f570
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Replace the hardcoded cpp exports with a generated one where it's
applicable.
Task-number: QTBUG-90492
Change-Id: Idc160b594987b2c765e75bd669aae851b4366282
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove the configure.json and configure.pri files that
were used for the qmake-based configure.
Remove the .prev_*.cmake files that were a by-product of
configurejson2cmake.py.
Pick-to: 6.2
Task-number: QTBUG-89536
Change-Id: Ie827562f7fd2513d59f69234d77b8b93124ea78e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Either the condition 'if(oldChild)' is redundant or there is possible
null pointer dereference: oldChild.
Pick-to: 6.1
Change-Id: I28971cfa33294679ddd325158669b422b3a1c2eb
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
* Remove heading that causes QDoc's autolinker to link incorrectly.
* Clean up language a bit while at it.
* Drop a double space.
Fixes: QTBUG-89283
Pick-to: 6.0
Change-Id: Ice778d66deab384b66eb50b790670c9e3c8b0e84
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
QXmlSimpleReader was moved to qt5compat. In the qt6 migration guide, we
would like to point to it. This patch adds qt5compat to the dependencies
of QtXml documentation in order to be able to do this.
Task-number: QTBUG-88533
Pick-to: 6.0
Change-Id: Ifaad595862b80d31310ed594e21168cec56133a0
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
The Professional CMake book suggests always using explicit linkage with
target_link_libraries, so let's use that.
Whether to use PUBLIC or PRIVATE depends on the context. But let's
be conservative and advise on using PRIVATE by default.
Task-number: QTBUG-88935
Pick-to: 6.0
Change-Id: I12b80ee85be9f6916f1e4dea6b1c9cb29e03c20f
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We've decided that QScopedPointer shouldn't be movable,
because it would break the semantics of being "scoped"
(the pointer/pointee won't survive the scope).
Then, QScopedPointer shouldn't allow for take() either.
If you need those semantics, reach for unique_ptr.
[ChangeLog][QtCore][QScopedPointer] The take() function
has been deprecated. This was an API mistake, as it
allowed the pointer/pointee to escape from the scope,
defeating the point of the QScopedPointer class. If you
need such semantics, use std::unique_ptr (and call
release()).
Change-Id: I3236f085f763b04eb98e3242abc06f7c54fb3d8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The content in the porting guides are closer to a changelog than
a porting guide. At this point, it is easier for maintainers and
contributors to write in a changelog than a guide. This change
should help with readability and is closer to the usage of
"Changes" in documentation.
Part of a rename in other submodules.
Task-number: QTBUG-87156
Change-Id: Ib59de7976fae19e7b39962e80161df6628e4070b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The non-versioned one's do miss some properties. It's therefore best
to not advocate using them.
Change-Id: I53645e65ed4de4e0100e59905c024cdfe40be0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Check the reference count before deleting. Patch
as contributed on bug report.
Pick-to: 5.15 5.12
Fixes: QTBUG-86547
Change-Id: I2cb197e3eeda7ade2442c23f6b4f1ae6ff2ff810
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also add existing such docs to the new document group
Task-number: QTBUG-84051
Change-Id: I76f033f0846e09943f249d2beeb1606869eef382
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
It has been deprecated and will live in qt5compat from now on.
Fixes: QTBUG-86480
Change-Id: I3744c7cee058d51d0fce633a174ab1a0f9235d2c
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
This follows up on commit d273076b44
which left a comment asking for the clean-up this finishes.
Task-number: QTBUG-85700
Change-Id: I1c6896a42a09b873302ad7ec8273879f2a4a4ce6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Content for the deprecated SAX interface was removed, remove rest of
the linking as well.
Pick-to: 5.15
Change-Id: Idd233a821139837b779e551aeba914114500e39e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This gives some source incompatibilities, most of them can be
handled by using auto instead of QStringRef explicitly.
[ChangeLog][Important API changes] QXmlStream now uses QStringView
insteead of QStringRef in it's API. Using auto forvariables returning
a QStringRef in Qt 5 should lead to code that can be used against both
Qt versions.
Fixes: QTBUG-84317
Change-Id: I6df3a9507276f5d16d044a6bdbe0e4810cf99440
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
We extend configurejson2cmake to read the "commandline"
information from configure.json. This data is then translated to CMake function
calls and written it into commandline.cmake files.
We extend QtProcessConfigureArgs.cmake to pick up those commandline.cmake
files to feed our command line handling code, which is a
re-implementation of the command line handling in qt_configure.prf.
The command line handler sets INPUT_xxx variables, similar to
configure/qmake's config.input.xxx variables. The INPUT_xxx values are
translated
- to -DFEATURE_xxx=ON/OFF arguments if the input represents a feature,
- to corresponding CMake variables if such a variable is known,
- or to -DINPUT_xxx=yyy CMake arguments.
Configure arguments that have an entry in
cmake/configure-cmake-mapping.md are actually implemented. Other
arguments are likely to need more work.
Task-number: QTBUG-85373
Change-Id: Ia96baa673fc1fb88e73ba05a1afb473aa074b37d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move the QIODevice::OpenMode enum into a base class, so that
we can remove the full QIODevice (and thus QObject) dependency
from qdatastream.h and qtextstream.h.
This is required so that we can include QDataStream in qmetatype.h
without getting circular dependencies.
As a nice side effect, QDataStream and QTextStream can now inherit
QIODeviceBase and provide the OpenMode enum directly in their
class scope.
Change-Id: Ifa68b7b1d8d95687ed032f6c9206f92e63bfacdf
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
kernel\qmetaobjectbuilder.cpp(1279): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
kernel\qmetaobjectbuilder.cpp(1432): warning C4267: '+=': conversion from 'size_t' to 'int', possible loss of data
sax\qxml.cpp(1275): warning C4267: 'argument': conversion from 'size_t' to 'int', possible loss of data
text\qfontsubset.cpp(920): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
text\qfontsubset.cpp(920): warning C4267: 'initializing': conversion from 'size_t' to 'const int', possible loss of data
text\qtextengine.cpp(2664): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
text\qtextengine.cpp(2665): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
text\qtextengine.cpp(2706): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
text\qtextengine.cpp(2707): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
itemviews\qbsptree.cpp(60): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
kernel\qprintengine_win.cpp(1558): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
qsql_odbc.cpp(804): warning C4267: 'argument': conversion from 'size_t' to 'SQLINTEGER', possible loss of data
qsql_odbc.cpp(822): warning C4267: 'argument': conversion from 'size_t' to 'SQLINTEGER', possible loss of data
qsql_odbc.cpp(1585): warning C4267: 'initializing': conversion from 'size_t' to 'int', possible loss of data
qsql_odbc.cpp(1602): warning C4267: 'argument': conversion from 'size_t' to 'int', possible loss of data
qwindowsmime.cpp(770): warning C4267: '+=': conversion from 'size_t' to 'int', possible loss of data
windows\qwindowsmime.cpp(770): warning C4267: '+=': conversion from 'size_t' to 'int', possible loss of data
Change-Id: I04fbe17b9782f4c2704933fc005449b1e992475e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a namespaceURI parameter to the following methods of QDomNode:
firstChildElement(), lastChildElement(), nextChildElement() and
previousChildElement()
Those methods can now be used to filter for elements with a specific
namespaceURI without the need to use QDomNodeList.
[ChangeLog][QtXml][QDom] Added namespaceURI parameter to browse methods
like firstChildElement() to filter for elements with certain namespaces
without the need of QDomNodeList.
Change-Id: Ic2cfe8c6d5d5f6b5fcf27165df15bce54ad0f23a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Qt 5.4 is not documented anymore since quite some time.
Change-Id: I6811ead502178f7acbed8cf450e42d7fd33ae29b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is Qt 6, so Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT6 is the same as
Q_DECLARE_SHARED.
Let's hope we'll collectively get better at detecting missing
Q_DECLARE_SHARED so we won't need a
Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT7 in the future.
Change-Id: I3da9faff4c66b64a3b257309012a2a10a6c6d027
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Just so we can get this cleaned up as well and remove it from
Qt Core.
Change-Id: I2b5b821b039ce2c024ec3cb7338a1a9becdd2157
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no real dependency to QTextCodec in those files anymore.
Change-Id: Ifaf19ab554fd108fa26095db4e2bd4a3e9ea427f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QStringConverter instead. Also change the default
encoding of QTextStream to utf8.
Change-Id: I30682e75fe0462d1a937539f773640c83a2d82e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a first step add setEncoding/encoding() methods that use the
QStringConverter::Encoding enum, and port all uses of setCodec()/
codec() over to the new API.
Internally QTextStream still uses QTextCodec, this will be ported
over to QStringConverter in a follow-up change.
Change-Id: Icd764cf47b449b57f4ebd010c2dad89e6717d6c0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the auto test accordingly, and at the same time remove
all uses of QTextStream (as they aren't required).
Change-Id: I71b7cf6a6b54ea59507f27d5d2d04cc5ae5885fc
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Kai Köhne
Sona Kurazyan
Luca Di Sera
Fabian Kosmale
Venugopal Shivashankar
Jonas Kvinge
Alexey Edelev
Joerg Bornemann
Paul Wicking
Zou Ya
Nico Vertriest
Andreas Buhr
Giuseppe D'Angelo
Jerome Pasion
Zhang Sheng
Karsten Heimrich
Topi Reinio
Lars Knoll
Alexandru Croitor
Friedemann Kleint
Edward Welbourne
Linus Jahn
Marc Mutz