The color editor factory example is removed and part of the codes are
used as snippets.
Fixes: QTBUG-119985
Pick-to: 6.7 6.6
Change-Id: I421e473e7db09a5af7543b80b87a338d8ff2ab7e
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
In the Addressbook example, any entry whose name doesn't start
with a letter will not appear in any of the categories,
but it will still exist. These entries would make the
"There are currently no contacts in your address book" page
disappear even when no entries could be found in the categories.
Check if a new entry has a name that doesn't start with a letter,
and if so, don't add it as a contact. Also, notify user that names
must start with a letter when this happens.
Fixes: QTBUG-124254
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I7f25711785ec7a82852a0f37d9f096cc3af41576
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Projects were modified using the tool at:
https://git.qt.io/alcroito/cmake_refactor
A couple of examples had to be adapted manually, due to them including
more than one app per example subdirectory.
The INSTALL_EXAMPLESDIR and INSTALL_EXAMPLEDIR assignments were
removed.
The install(TARGETS) calls were modified according to our
documentation snippets for qt_generate_deploy_app_script.
A qt_generate_deploy_app_script call was added for each executable
target.
Note that the deployment step will be skipped in the CI for now,
because we enable QT_DEPLOY_MINIMAL_EXAMPLES and thus
QT_INTERNAL_SKIP_DEPLOYMENT, and also because standalone examples
are not enabled yet, and deployment is disabled for in-tree (so
no-standalone-example) prefix builds.
The install(TARGETS) calls for each example will still run,
installing the examples into an installed_examples directory, that
will not be archived by the CI.
Pick-to: 6.7
Task-number: QTBUG-102056
Task-number: QTBUG-102057
Change-Id: Ida389bbad41710b2ae5da4d95e2d85be9e0cd9ce
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Example takes precedent over build system file type.
According to QUIP-18 [1], all examples file should be
LicenseRef-Qt-Commercial OR BSD-3-Clause
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: Id348a89884bb309b96abb31077f14a51086b5d0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
The essence of the example was already fully quoted in the
model/view documentation. Move the code into a snippet
source, and update the screenshot.
Fixes: QTBUG-119976
Pick-to: 6.7 6.6
Change-Id: Id2f10bb26a650419969bbfa9b76cb74babd3319e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Andreas Eliasson <andreas.eliasson@qt.io>
- Use QStringView.
- Use a list of a pair-like struct to represent the state instead
of 2 lists.
- Use qsizetype.
- Use constLast() to avoid detaching.
Pick-to: 6.6
Change-Id: Icc3586451f081f6166fece52675d5379160f51da
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add a test running QAbstractItemModelTester on the model.
Pick-to: 6.6
Change-Id: I40c141c7e754ca05234da611534bd65e456be2fb
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
- Use QStringView.
- Use a list of a pair-like struct to represent the state instead of
2 lists.
- Use qsizetype.
- Use constLast() to avoid detaching.
Pick-to: 6.6
Change-Id: I5ff8a17a4d583a7d2a0a11a52c29b9117280382c
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Add a test running QAbstractItemModelTester on the model.
Pick-to: 6.6
Change-Id: I6ea5d34308357409b9a13eb0271392c8d171addd
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
- Use unique_ptr instead of manual memory management
- Improve consistenty in variable name with the simpletreemodel
childrenNumber -> row, m_ prefix for member variables
Change-Id: Iface30c2224c2b1db7c623a9e6fcbb449c556f3e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use std::unique_ptr to manage items tree memory allocations. This also
use the new string literals operator.
Change-Id: Iab002b5dc612b75cef0be10862e263c6c6c013c1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The code is mostly an implementation of a model based on QStorageInfo,
shown in an otherwise uninteresting tree view.
Pick-to: 6.5 6.6
Change-Id: Id6ce70d71ddc9bcd6e82a9ee12f5e1af159eac7a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The relevant bits are a two-line snippet.
Pick-to: 6.6 6.5
Change-Id: Id1731e5bc6585b1d1fd684817b39d19ad0a8a9cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The 'sdi' example is a candidate for removal, so point at the
spreadsheet example instead, which is not.
Pick-to: 6.5
Change-Id: I4405f2421db8be79898a38ca4f3fa1ea5fe0280b
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
On small screen devices such as iPhone targets, the save file dialog is
using a non-native dialog, and it doesn't fit the screen real estate to
the extent that the [Ok] button is clipped away.
In addition, the open file dialog and the save file dialog doesn't
cooperate very well on platforms such as iOS without more plumbing.
Since using the file dialog is out of the scope for this example we
remove all usages of it.
Pick-to: 6.5
Change-Id: Ie165355ed0b671d93e44d2d55791156367b0ea5c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We (almost) only build apps, for which PRIVATE linkage makes more sense.
Change-Id: I09a509c3fb33a00cdfdede687b3f95d638f42091
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Some CMakeLists.txt files did link to Qt6::PrintSupport twice. Also
unify formatting and order of the linker step.
Change-Id: I4af935c5dc3de6c243aad8511b0803ceaa872589
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This is what we promote also in the documentation.
Change-Id: If91aebafe861b0c934acbb2c69afd182abc3345d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This allows to fix the warning:
qtbase/examples/widgets/itemviews/addressbook/addresswidget.cpp:115:
warning: loop variable ‘str’ of type ‘const QString&’ binds to a
temporary constructed from type ‘const char* const’
[-Wrange-loop-construct]
Pick-to: 6.4
Change-Id: Ibbfa7f9e85fe9ef79291f9da3d161667286b282e
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
CMAKE_INCLUDE_CURRENT_DIR is not necessary anymore for moc since
CMake 3.8: https://cmake.org/cmake/help/latest/release/3.8.html#other-changes
CMAKE_AUTORCC should not be used anymore. Instead, we now use
qt_add_resources() or similar
Enable CMAKE_AUTOUIC only if .ui files are present.
Pick-to: 6.3
Task-number: QTBUG-87643
Change-Id: I835e2994cd5dba9918136999499b9077961b616c
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Also consolidate several find_package(Qt6 ...) calls in one call.
Task-number: QTBUG-98867
Change-Id: Idfd5e71f46d4489fac7411cbfadb84437a0658f3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
These are left-overs from the initial qmake2cmake conversion.
Pick-to: 6.2
Change-Id: Ie15c9ff022ea4566d10c1ba74599de9af83d29a7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
targetSquare judges which square the position falls in. The point
scaling calculation method should not be used. The return value of
QPoint operator/ will be rounded up. Modified to separate the x and
y of position to calculate.
Fixes: QTBUG-81842
Change-Id: I70375185a78ba47efe01be3fd490e0fb0f456e17
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The former is QT_DEPRECATED_SINCE(6, 4).
Change-Id: I9e60639651b0832f1e3d3282d15dd0ab0b22d819
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Examples are intended to show how to build against an installed Qt.
Building them as part of the main build means the way the Qt targets
are defined and created are not representative of an end user's build.
By building them as separate projects using ExternalProject, we can
more closely replicate the intended audience's environment. This
should allow us to catch more problems earlier.
Having examples built as part of the main build also creates problems
with some static builds where a tool built by the main build is needed
during configure time. This happens with other repos like qtdeclarative
but not (currently) with qtbase. Converting the examples in qtbase to
be built using ExternalProject is intended as a demonstrator for how
other repos can do similar. Until other repos are converted, they will
continue to work as they did before, with examples as part of the main
build for non-static builds only.
The new build-externally behavior is only supported for non-prefix
builds with this change. Prefix builds will continue to use the old
non-external method. Support for building examples externally in
prefix builds will be a separate change.
Task-number: QTBUG-90820
Fixes: QTBUG-91068
Change-Id: I2304329940568dbdb7da18d54d5595ea7d8668bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- Start in root folder so that large directories (/bin/, Windows)
are easily reachable
- Remove the line edit and navigate by double clicking instead
since this is more in line with expectations
- Use a QPlainTextEdit for logging
- Make the log message more informative
- Add icons
Change-Id: Ia3cd7fc143efef80772923291f0b711913aa47be
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
MohammadHossein Qanbari
Chris Lerner
Alexandru Croitor
Lucie Gérard
Alexey Edelev
Assam Boudjelthia
Volker Hilsheimer
Friedemann Kleint
Ahmad Samir
Tor Arne Vestbø
Carl Schwan
Kai Köhne
Amir Masoud Abdol
Jan Arve Sæther
Marc Mutz
Ivan Solovev
Tang Haixiang
Joerg Bornemann
Marc Mutz
Craig Scott