We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- Remove the casting operator of QFuture<T> to T. It calls
QFuture::result(), which may lead to undefined behavior if the user
has moved the results from QFuture via QFuture::takeResult() before
trying to do the conversion.
- Disable implicit conversion of QFuture<T> to QFuture<void>, by making
the constructor explicit. If the users really intend to do the
conversion, they should do it explicitly.
[ChangeLog][Source-Incompatible Changes][QFuture] Implicit conversions
of QFuture<T> to T and to QFuture<void> have been disabled. Use
QFuture::result() or QFuture::takeResult() where you need to convert
QFuture<T> to T. Use the explicit QFuture<void>(const QFuture<T> &)
constructor to convert QFuture<T> to QFuture<void>.
Change-Id: I153d4137d36365b1611ac934fb3ac2eb667fdd6c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
These operators don't do what the user might expect and may lead to
confusing results.
[ChangeLog][Source-Incompatible Changes][QFuture] The comparison
operators of QFuture have been removed. They were comparing the
underlying d-ptrs instead of comparing the results (as the users
might expect), which is not very helpful for the users point of view.
Change-Id: I80a887610eac38b60329128cca52cdb5fb515207
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As requested by a ### Qt 6 comment. This then implied a few other
functions weren't constexpr, which broke some tests.
Task-number: QTBUG-85700
Change-Id: I6522a9b2d7a74e117442121400a1d7198d323967
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These classes should not inherit from each other
anymore in Qt 6. The reason is that this makes
the 95% case of using a non-recursive mutex
much slower than it has to be.
This way, QMutex can now inline the fast path
and be pretty much as fast as QBasicMutex is
in Qt 5. They actually use the same code paths
now. The main difference is that QMutex allows
calling tryLock() with a timeout, which that
is not allowed for QBasicMutex.
[ChangeLog][QtCore][QMutex] QMutex does not support
recursive locking anymore. Use QRecursiveMutex for that
purpose. QRecursiveMutex does not inherit QMutex anymore
in Qt 6.
Change-Id: I10f9bab6269a9181a2e9f534fb72ce65bc76d989
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Proposed during API review
Change-Id: I9c43e1915c50803ab69bfe07a91c05d2224b86c4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Changed QPromise::addResult() to return bool value. True is returned
when result is added and false is returned when e.g. promise is in final
state (canceled or finished) or when addResult() is called twice with
the same index as argument (in which case new value is rejected)
Updated QFutureInterface::reportFinished() that accepts optional result
as argument to align with other result adding methods. This function
is "internal" only (as of now), so no documentation update is needed
Change-Id: I2d63069246e5e5c8cf04529c22bb296faaaae53d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
One can call addResult(value, index) twice and consequently set the
value twice by the same index. This seems rather strange and probably
should not be allowed. This commit rejects setting results when there's
already a valid result by that index. Consequently, this fixes memory
leaks caused by N-times-called addResult(..., index)
Fixes: QTBUG-86828
Change-Id: I77494f2cb73ce727ffad721cfcdcaa420899eb25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QFuture::takeResult() currently returns std::vector instead of QList,
because QList does not support move-only types. Disable this method
until QList is fixed to work with move-only types in Qt 6.1.
Also did minor doc-fixes.
Change-Id: I87feaf75d9433a3b540edd00039c3e21d6994985
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Pending results were never cleared by result store. This led to memory
leaks when the results never transitioned to "visible" results
Change-Id: I674302eb51542ad5f4d918da68d616428c73ae9f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since we drop the lock while deleting threads, we need to handle
the queue possibly being accessed and changed by the pool threads
while clear() is running.
Pick-to: 5.15
Fixes: QTBUG-87092
Change-Id: I7611edab90520454278502a58621e299f9cd1f6e
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These were now always defined, hence redundant.
Leave the #define in place so that we can verify we actually do always
define it, in a #else of an existing #if check on it.
Change-Id: Iea4c3dbc8f9982268bcf81da5ef17fe2ebf5c462
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Just starting 20 threads to test this won't cut it if
the machine you're testing on has an ideal thread count
of 16 or larger.
Change-Id: Icba8f00aa836fec6da41c71b318e9e17bdd47c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Since waiting for a spy employs polling, it may happen
that while waiting for a startedSpy we had received already
a signal for finishedSpy. This explains current flakiness.
The fix is to connect to lambdas instead and update
the hit count accordingly. Inside lambdas we also
ensure the correct order for started / finised signals.
After waitForFinished() unblocks we ensure that possible
pending asynchronous signals (started / finished) are processed
and check the final state.
Task-number: QTBUG-83076
Change-Id: I16963ef9c011cb613d7b409d3e3032303a942336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Currently QFuture::waitForFinished() exits as soon as the future is not
in the running state. If the user calls it before
QPromise::reportStarted() is called, it will exit immediately, because
nothing is running yet. Fix the behavior to wait for the finished state.
[ChangeLog][Important Behavior Changes][QtCore] Fixed the behavior of
QFuture::waitForFinished() to wait until the future is actually in the
finished state, instead of exiting as soon as it is not in the running
state. This prevents waitForFinished() from exiting immediately, if at
the moment of calling it the future is not started yet.
Task-number: QTBUG-84867
Change-Id: I12f5e95d8200cfffa5653b6aa566a625f8320ca8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Made QPromise::swap public, added free standing swap() for
QFutureInterface and QPromise. Updated QPromise special member
functions. Extended tests
Task-number: QTBUG-84977
Change-Id: I5daf6876df306d082441dbcdf5ae4dee3bfc0ead
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use aggregation instead. Prepare for using QPromise instead of QFutureInterface.
Task-number: QTBUG-84702
Change-Id: Ic88564dca8c83a178a281cb843032292210a6d25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is in preparation for regenerating them with the new qt_foo
prefixed APIs.
Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As we require C++17 now. The configure-time test checking for
future/async is left in for the moment being.
Change-Id: Ifde39d420673f70a2277f5a645bfaad30935a381
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Documented QPromise. Added snippets under auto tests
to ensure they are compiled and run in CI.
Task-number: QTBUG-81586
Change-Id: I20084e38f9d2f6fc8540f95ee03ec3d2827177e8
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QPromise and QFuture created from it share the same internal state
(namely, QFutureInterface object). QPromise provides high-level
management of the shared resource, ensuring thread-safe behavior
on construction and destruction (also taking into account
QFuture::waitForFinished() semantics).
QFuture acts as a primary controller of QPromise via action
initiating methods such as suspend() or cancel(). QPromise is
equipped with methods to check the status, but the actual
handling of QFuture action "requests" is user-defined.
[ChangeLog][QtCore][QPromise] Added QPromise class to accompany
QFuture. It allows one to communicate computation results and
progress to the QFuture via a shared state.
Task-number: QTBUG-81586
Change-Id: Ibab9681d35fe63754bf394ad0e7923e2683e2457
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Deprecated the pause-related APIs of QFuture* classes and
added alternatives having "suspend" in the name instead.
With 2f15927f01 new
isSuspended()/suspended() APIs have been added to QFuture* classes for
checking if pause/suspension is still in progress or it already took
effect. To keep the naming more consistent, renamed:
- setPaused() -> setSuspended()
- pause() -> suspend()
- togglePaused() -> toggleSuspended()
- QFutureWatcher::paused() -> QFutureWatcher::suspending()
Note that QFuture*::isPaused() now corresponds to (isSuspending() ||
isSuspended()).
[ChangeLog][Deprecation Notice] Deprecated pause-related APIs of
QFuture and QFutureWatcher. Added alternatives having "suspend" in
the name instead.
Change-Id: Ibeb75017a118401d64d18b72fb95d78e28c4661c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Because setting QFutureInterface to paused state does not mean that
the computations that are already in progress will stop immediately,
it may be useful to get notified when pause actually takes effect.
Introduced the QFutureWatcher::suspended() signal, to be emitted when
there are no more computations in progress, and no more result ready
or progress reporting signals will be emitted, i.e. when pause took
effect. Added {QFuture, QFutureWatcher}::isSuspended() methods for
checking if pause took effect.
QtConcurrent will now to send QFutureCallOutEvent::Suspended event
when the state is paused and there are no more active threads.
[ChangeLog][QtCore][QFutureWatcher] Added a new QFutureWatcher::suspended()
signal, to be emitted when pause took effect, meaning that there are no
more computations in progress. Added {QFuture, QFutureWatcher}::isSuspended()
methods for checking if pause took effect.
Fixes: QTBUG-12152
Change-Id: I88f2ad24d800cd6293dec63977d45bd35f9a09f0
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
When QFutureWatcher (or QFutureInterface) is paused, it doesn't
mean that it will take effect immediately: the pending tasks may
still be in progress and keep reporting results. At the moment
QFutureWatcher will queue those events and report only with the
next resume. This behavior is wrong, QFutureWatcher should not
decide when to report events, the sender should decide when is the
right time. There's no benefit in reporting already happened events
with delay. Because of this, even the pause event itself was being
reported after resume.
Fixed the behavior by removing the logic of queueing events when
the state is set to "paused". It seems unlikely that the users of
QFutureWatcher rely on reporting events with delay.
[ChangeLog][Important Behavior Changes][QtCore] QFutureWatcher will not
immediately stop delivering progress and result ready signals when the
future is paused. At the moment of pausing there may be still computations
that are in progress and cannot be stopped. Signals for such computations
will be still delivered after pause, instead of being postponed and
reported only after next resume.
Fixes: QTBUG-12152
Change-Id: I9f0b545ac096578c52cc72d60575c018c01e3368
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Added QFuture::onCanceled() method, for attaching handlers to be called
when the QFuture gets canceled.
Change-Id: I1f01647d6173ba0c1db6641e14140108b33ac7c4
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Introduced QtFuture::connect(sender, signal) function returning a
QFuture object, which is resolved when the signal is emitted.
Task-number: QTBUG-81589
Change-Id: Idbe301eb247b468b9b34f3470c3359d6a7af2f3a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Added asserts to insure the invariant declared in the documentation.
Canceled future object is not valid, hence we don't need to handle
this case separately.
Fixes: QTBUG-83389
Change-Id: Ib0653ef40cd3135574a91740e4ce2c6dc4da8a71
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use the move-only versions of result reporting and getting operations,
if the type of QFuture is not copyable.
Task-number: QTBUG-81941
Change-Id: Ic9fa978380e2c24e190e68d974051a650b0e5571
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Added QFuture::onFailed() method, which allows attaching handlers for
exceptions that may occur in QFuture continuation chains.
Task-number: QTBUG-81588
Change-Id: Iadeee99e3a7573207f6ca9f650ff9f7b6faa2cf7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replaced the internal ExceptionHolder for storing QException* by
std::exception_ptr. This will allow to report and store exceptions
of types that are not derived from QException.
Task-number: QTBUG-81588
Change-Id: I96be919d8289448b3e608310e51a16cebc586301
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QFuture's original design pre-dates C++11 and its
introduction of move semantics. QFuture is documented
as requiring copy-constructible classes and uses copy
operations for results (which in Qt's universe in general
is relatively cheap, due to the use of COW/data sharing).
QFuture::result(), QFuture::results(), QFuture::resultAt()
return copies. Now that the year is 2020, it makes some
sense to add support for move semantics and, in particular,
move-only types, like std::unique_ptr (that cannot be
obtained from QFuture using result etc.). Taking a result
or results from a QFuture renders it invalid. This patch
adds QFuture<T>::takeResults(), takeResult() and isValid().
'Taking' functions are 'enabled_if' for non-void types only
to improve the compiler's diagnostic (which would otherwise
spit some semi-articulate diagnostic).
As a bonus a bug was found in the pre-existing code (after
initially copy and pasted into the new function) - the one
where we incorrectly report ready results in (rather obscure)
filter mode.
Fixes: QTBUG-81941
Fixes: QTBUG-83182
Change-Id: I8ccdfc50aa310a3a79eef2cdc55f5ea210f889c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added QFuture::then() methods to allow chaining multiple asynchronous
computations.
Continuations can use the following execution policies:
* QtFuture::Launch::Sync - the continuation will be launched in the same
thread in which the parent has been executing.
* QtFuture::Launch::Async - the continuation will be launched in a new
thread.
* QtFuture::Launch::Inherit - the continuation will inherit the launch
policy of the parent, or its thread pool (if it was using a custom one).
* Additionally then() also accepts a custom QThreadPool* instance.
Note, that if the parent future gets canceled, its continuation(s) will
be also canceled.
If the parent throws an exception, it will be propagated to the
continuation's future, unless it is caught inside the continuation
(if it has a QFuture arg).
Some example usages:
QFuture<int> future = ...;
future.then([](int res1){ ... }).then([](int res2){ ... })...
QFuture<int> future = ...;
future.then([](QFuture<int> fut1){ /* do something with fut1 */ })...
In the examples above all continuations will run in the same thread as
future.
QFuture<int> future = ...;
future.then(QtFuture::Launch::Async, [](int res1){ ... })
.then([](int res2){ ... })..
In this example the continuations will run in a new thread (but on the
same one).
QThreadPool pool;
QFuture<int> future = ...;
future.then(&pool, [](int res1){ ... })
.then([](int res2){ ... })..
In this example the continuations will run in the given thread pool.
[ChangeLog][QtCore] Added support for attaching continuations to QFuture.
Task-number: QTBUG-81587
Change-Id: I5b2e176694f7ae8ce00404aca725e9a170818955
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
This makes it easier to create one without having to create
a derivative class. The patch also adds a path to avoid using
QRunnable directly in QThreadPool.
Change-Id: I9caa7dabb6f641b547d4771c863aa6ab7f01b704
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The concept was a nice idea to avoid accidental detach() calls
in implicitly shared containers, but it conflicts with a C++11
compatible API for them, with signatures for modifying methods
taking a const_iterator as argument and returning an iterator
(e.g. iterator erase(const_iterator)).
Change-Id: Ia33124bedbd260774a0a66f49aedd84e19c9971b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The macro is not documented, so not part of the public Qt API. It is
made obsolete by the alignof keyword in C++11.
Remove the usage of the macro across qtbase, in particular the
workarounds for compilers that didn't support alignof, and that will
not be supported in Qt 6.
The macro definition is left in place, no need to break existing
code.
Task-number: QTBUG-76414
Change-Id: I1cfedcd4dd748128696cdfb546d97aae4f98c3da
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This fixes the qatomicinteger magic by making $$basename work for one
particular case.
qthreadstorage still needs investigation.
Task-number: QTBUG-78221
Change-Id: I7bb38f6ca24273bcf0443ab25685c8e815814c3c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In all of these cases, the effect of the change is local to one file.
Change-Id: I3bda3aadee3b42e7797183c2330183390b92d1f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the recursive mutex use case out of QMutex into a separate class,
unsurprisingly called QRecursiveMutex. As an immediate benefit, 90% of
the QMutex users now enjoy a constexpr QMutex ctor.
This change prepares for a real split in Qt 6, so that both use-cases
are no longer bundled up in one class.
[ChangeLog][QtCore][QMutex] Added QRecursiveMutex as a replacement of
QMutex(QMutex::Recursive).
Change-Id: I79b8724e8a8ee65e4bd0f06acd76103fe4197b8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... except for tests, which manually undefine the macro.
Like QT_NO_FOREACH, this is a technical way to keep JSI-free
modules JSI-free going forward.
Change-Id: Icf1342da00a700f42f9e32a253d1cdb94c38dd7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Wait for the result at the target index if the future
is running and the iterator index is past the current
result count.
Determine if there is a result at the target index
after waitForResult() returns, and return -1/end if
not.
Also support decrementing the end iterator. In this
case wait for the future to finish in order to get
the final result count.
Task-number: QTBUG-59811
Change-Id: I8fcc711bab2e72c3c5196a55b794d25e18bb324d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Replacing the qmake test with the one corelib/thread/thread.pri uses
for those classes.
Change-Id: Ie803190b821736c89b056ae51b7dfe92046189eb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "boot2qt" platform needs to be blacklisted,
not "ubuntu-18.04".
This reverts commit 0d49ac0ffc.
Change-Id: I768a66c56f5fc7e0771473152579ed1c01bbbdb9
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I53d5238ff36706eb9c6f8eb04b954ec595ca30de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
"terminate" and "terminated" both fail on Android since
QThread::terminate not supported on Android. So we should skip them.
Task-number: QTBUG-68596
Change-Id: Id0d1dde2cfa02bb2978e5dd16087bf8f3bf112b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This autotest fails on QEMU armv7 builds.
Task-number: QTBUG-68866
Change-Id: Idb4bf39712a22c40f6d779a46ad2dd1f456ef48b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This was originally added so that you could replace a T with
QAtomicInteger<T> in the same class and still keep ABI. However, for
legacy reasons, on 32-bit x86, types larger than 4 bytes keep an old
1990s alignment of only 4 bytes, but modern std::atomic<T> for those 8-
byte types enforces an alignment of 8 bytes. Therefore, the requirement
to keep alignment is not possible to guarantee.
In other words: you may not replace T with QAtomicInteger<T> or
std::atomic<T> and assume no ABI breakages in all platforms.
This is a requirement to implement atomicity. An 8-byte type aligned to
only a 4-byte boundary could cross a 16-byte boundary or, worse, cross a
cacheline boundary. Crossing the 16-byte boundary could be bad on some
processors, but crossing the cacheline boundary (addresses ending in
0x3C, 0x7C, 0xCC and 0xFC, or 4 out of 64 possible addresses or 6.25%)
is always bad: the CPUs cannot guarantee an atomic load or store
operation.
See also <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71660>.
Task-number: QTBUG-67858
Change-Id: If90a92b041d3442fa0a4fffd15283e4615474582
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
These two places were sort of manually implementing QTRY_VERIFY except that they
never time out.
Change-Id: I136e6c7400194327c0475c6acfc019825ccec1b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Use QSignalSpy::wait or QTRY_VERIFY instead. This shaved off ~200 ms of the
running time of the test and is more reliable.
Some unconditional qWait()s still remain in this test. They are giving an
opportunity for the wrong thing to happen and thus are not waiting for any
specific condition to be fulfilled.
Task-number: QTBUG-63992
Change-Id: I25a4470fe8d6a5b8b5039b3ed77321d24faa1707
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the thread that got woken up by release() is supposed to release()
to wake up another thread, we were deadlocking. This happened because we
cleared the bit indicating that there was contention when the first
release(). Instead of storing a single bit, we now store the number of
threads waiting.
Task-number: QTBUG-66875
Change-Id: I72f5230ad59948f784eafffd15193873502ecba4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
all of these iterator classes already have a member operator+, which allows iter+int.
This commits addes non-member operator+, which allows int+iter, and forwards to the member
QList and QArrayData iterators now satisfy RandomAccessIterator concept
Change-Id: I25c1dd8cea299e735d5a5e288dbe23dc1d7a1933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also drops a few instances where the dependency was purely runtime,
especially for examples.
Change-Id: I2a0476f79928143596bdb3b8f01193af90574ae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This test makes sure that we do not introduce a regression where the
threads exited the inner loop over the queue before the queue was
empty. This was triggered by calling tryTake at least maxThreadCount
times, which left the same number of null pointers in the queue
and caused the inner loop to exit too soon for all the threads.
Change-Id: I3a9d800149b88d09510ddc424667670b60f06a33
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The issue was introduced by eaee1209f0, so
it affected only 5.9.2.
[ChangeLog][QtCore][QSemaphore] Fixed a regression that would make
tryAcquire() not to wait forever if the timeout was a negative
value. Note: new code is advised to only use -1 to indicate "forever",
as some other functions taking timeout periods do not accept other
values.
Task-number: QTBUG-64413
Change-Id: I57a1bd6e0c194530b732fffd14f58fce60d5dfc9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Allows setting the stack size for the thread pool
worker threads. Implemented using QThread::stackSize.
Task-number: QTBUG-2568
Change-Id: Ic7f3981289290685195bbaee977a23e0c3c49bf0
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tryAcquireWithTimeout(0.2s) was already blacklisted and
now the same failed with "(2s)".
Task-number: QTBUG-58745
Change-Id: I82363238c08056d2969a7616e3a6e5af080d537d
Reviewed-by: Liang Qi <liang.qi@qt.io>
In the spirit of std::thread, which takes a function to call and its
parameters, and runs it in a new thread. Since the user might want to
connect to signals, move QObjects into the new thread, etc., the new
thread is not immediately started.
Although technically all of this _should_ be implementable in pure
C++11, there is nothing in the Standard to help us not reinvent all the
plumbing: packing the decay'd parameters, storing them, invoking the
function over the parameters (honoring INVOKE/std::invoke semantics).
std::function does not do the job, as it's copiable and therefore does
not support move-only functors; std::bind does not have INVOKE
semantics.
I certainly do not want to reimplement all the required facilities
inside of Qt. Therefore, the full blown implementation requires C++17
(std::invoke).
In order to make this useful also in pre-C++17, there are two additional
implementations (C++11 and C++14) that support just a callable, without
any arguments passed to it. The C++11 implementation makes use of a
class to store and call the callable (even move-only ones); basically,
it's what a closure type for a C++14 lambda would look like.
An alternative implementation could've used some of the existing
facilities inside QObject::connect implementation that store a functor
(for the connect() overload connecting to free functions), namely:
the QtPrivate::QFunctorSlotObject class. However:
* QFunctorSlotObject does not support move-only callables (see
QTBUG-60339);
* QFunctorSlotObject itself is not a callable (apparently by design),
and requires to be wrapped in a lambda that calls call() on it;
* the moment QTBUG-60339 is solved, we'd need the same handwritten
closure to keep QFunctorSlotObject working with move-only callabes.
So: just use the handwritten one.
The C++14 implementation is a simplified version of the C++11 one,
actually using a generalized lambda capture (corresponding to the
handwritten C++11 closure type).
All three implementations use std::async (with a deferred launch policy,
a nice use case for it!) under the hood. It's certainly an overkill for
our use case, as we don't need the std::future, but at least std::async
does all the plumbing for us.
[ChangeLog][QtCore][QThread] Added the QThread::create function.
Change-Id: I339d0be6f689df7d56766839baebda0aa2f7e94c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It has started failing recently on the CI, too.
Task-number: QTBUG-58745
Change-Id: I4c8834917e6455d00c300549ed448b06da75d5bc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Let's take the beginning of the description: WaitForSingleObjectEx can
be up to 16 milliseconds early. This is proven by the fact that there
are tests doing:
wait(waitTime);
QVERIFY(timer.elapsed() >= waitTime - systemTimersResolution);
and failing.
Task-number: QTBUG-59337
Change-Id: Iae839f6a131a4f0784bffffd14a9a79523d69d94
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
ResultStore never actually exists, only ResutStoreBase does. So casting to
ResultStore<T> and calling its member functions is UB. Put the type dependent
function as template member functions within ResultStoreBase and so we don't
need QtPrivate::ResultStore anymore.
Same goes for the iterator.
Change-Id: I739b9d234ba2238977863df77fde3a4471a9abd2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The cancel() function added in 5b11e43e for Qt 5.5 suffers from a
number of problems:
First, if runnable->autoDelete() is true, then the function suffers
from the ABA problem (see documentation written for trytake()).
Second, if runnable->autoDelete() is false, due to cancel() throwing
away crucial information instead of returning it, the caller cannot
know whether the runnable was canceled (and thus has to be deleted),
wasn't found or is currently executing (and thus mustn't be deleted),
or has finished executing (and can be used to extract the result).
Deprecate this dangerous API and replace it with the much more useful
Private::stealRunnable(), promoted to public API and renamed to
tryTake() for consistency with the rest of Qt.
Described the various caveats in the function's documentation.
[ChangeLog][QtCore][QThreadPool] The cancel() function suffers from
several subtle issues and has been replaced with a new tryTake()
function.
Change-Id: I93125935614087efa24b3e3969dd6718aeabaa4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This is a simple RAII class that makes semaphore releasing
reliable in the face of exceptions and early returns.
This code originates from KDTools' KDSemaphoreReleaser[1], but
has been extensively reworked to support C++11 move semantics.
[1] https://docs.kdab.com/kdtools/2.3.0/class_k_d_semaphore_releaser.html
[ChangeLog][QtCore][QSemaphore] Added a new RAII class, QSemaphoreReleaser,
to reliably perform release() calls.
Change-Id: I6aff64d37cc0882b17c4419817bde60b542f34d9
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The future tests don't need QtConcurrent as QFuture and friends are in
QtCore. The printdevice test doesn't use QtNetwork and the lancelot as
well as the testlib tests don't use QtXml.
Change-Id: I150ac99b36682aa23ad22ba943266eb0f0952838
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was so slow it was blacklisted on all platforms for timing out.
This patch lowers the timeout to a 5th and tries removing the blacklist.
Change-Id: Ib28b21de572517c548a14300f26815598efe91e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
allowed code such as
mutex.try_lock_for(10us)
to compile, which is misleading, since it's actually a zero-
timeout try_lock().
Feedback from the std-discussions mailing list is that the
wait_for functions should wait for _at least_ the duration
given, because that is the natural direction of variance
(tasks becoming ready to run might not get a CPU immediately,
causing delays), while an interface that documents to wait
_no more_ than the given duration is promising something it
cannot fulfill.
Fix by converting the given duration to the smallest number
of milliseconds not less than the original duration. If that
is not representable in an int, use INT_MAX, emulating the
effect of a spurious wakeup, which are allowed to happen if
the function returns false in that case.
In the above example, the try_lock_for call is now equivalent
to
mutex.tryLock(1);
The tryLock() docs state that the actual waiting time does
not exceed the given milliseconds, but fixing that is a
separate issue.
Change-Id: Id4cbbea0ecc6fd2f94bb5aef28a1658be3728e52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test fails on Windows occasionally with values just short of 800, the lowest
observed being 791. It is probably rounding somehow to 10ms segments, so allow
it to be up to 10 ms too fast.
Change-Id: Ie28e9f61588b68a9060a006f78eedc3a26d05155
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The adoptedThreads test never spawned any thread causing a test error
later on. Hence add a winrt version using __beginthreadex which exists
for that platform.
Change-Id: I04f980218713df20cb41d804d732e0c99b958489
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Now QBasicMutex is Lockable and QMutex is TimedLockable, which means they can
be used in std::lock_guard, std::unique_lock, std::lock, etc.
[ChangeLog][QtCore][QMutex] QMutex now fully models the TimedLockable
concept by providing the try_lock, try_lock_for and try_lock_until
functions, therefore making it usable in Standard Library lock
management classes and functions.
Change-Id: I7c691481a5781a696701e1ab78186b5cefbd6a87
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This requires fixing the test on Windows: QMutex internally uses
WaitForSingleObjectEx which can wake up early, according to the system
timer resolution:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms687069(v=vs.85).aspx#waitfunctionsandtime-outintervals
QTime must be so slow that it hides the early wakes, but QElapsedTimer is
accurate enough to make the test fail unless we add back some tolerance to
compensate for the early wakeups.
Change-Id: I20b38af9c87a0b0e38a19b9bff1c3c24975c78f5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drop addSub() test. It executes exactly the union of fetchAndAdd()
and fetchAndSub(), which have already had their UBs fixed.
No need to do fixes in duplicated code.
Change-Id: Ib72caab0310fce3ff9a40c261d8a38518f91ecaf
Reviewed-by: David Faure <david.faure@kdab.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Signed integer overflows and underflows are undefined
behavior. A test that invokes UB tests nothing, because
the standard permits any outcome.
Fix by guarding the respective operations so
they are not executed if they would overflow
or underflow.
Change-Id: I40354ee88f40e4b47b70eac7790dc3a79ac70a57
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
[ChangeLog][Important Behavior Changes] Starting with Qt 5.7, Qt
requires a C++11 compiler with support for C++11 atomics. This affects
user code too: Qt headers no longer compile with a C++98 compiler. The
minimum compiler versions for this release are:
* Clang 3.4 (found in XCode 5.1)
* GCC 4.7
* Microsoft Visual Studio 2012
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f496ea9363f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's accessed by QFutureWatcherBase::isFinished(), potentially before
anything has set it. It gets to be initially true until setFuture()
has given it us unfinished future and set it false.
Add a regression test for matching state in future and watcher.
Task-number: QTBUG-12358
Change-Id: Iae7bdaa434ab80f518afe4d7d55df99c391991a4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This test when running on Windows has a race condition since in qthread_win.cpp the
finished signal is emitted before everything is cleaned up.
Change-Id: I3c03d9a245e297e8f79b2be2c34398bf7bac9bae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Assam Boudjelthia
Sona Kurazyan
Edward Welbourne
Lars Knoll
Andrei Golubev
Allan Sandfeld Jensen
Alexandru Croitor
Liu Yang
Jarek Kobus
Tor Arne Vestbø
Friedemann Kleint
Giuseppe D'Angelo
Oliver Wolff
Vitaly Fanaskov
Timur Pocheptsov
Liang Qi
Simon Hausmann
Leander Beernaert
Qt Forward Merge Bot
Volker Hilsheimer
Frederik Gladhorn
Daniel Smith
Marc Mutz
Tobias Hunger
Morten Johan Sørvig
Joerg Bornemann
Tony Sarajärvi
Ulf Hermann
Joni Jäntti
Mårten Nordheim
Thiago Macieira
Kari Oikarinen
Eric Lemanissier
Svenn-Arne Dragly
Kevin Funk
Sami Nurmenniemi
Olivier Goffart
Allan Sandfeld Jensen
Maurice Kalinowski
Liang Qi
Friedemann Kleint
Simon Hausmann
Jani Heikkinen
Maurice Kalinowski
Edward Welbourne
Frederik Gladhorn