QWidget::setParent might be called to change the window flags, without
changing the parent. For those cases, we don't have to clear the focus.
Decouple the newParent state from the wasCreated flag. In most places
where newParent was tested, wasCreated was either tested previously and
can't be false anyway, or the code executed is irrelevant for widgets
that are not yet created (there can't be a paint manager). In the
remaining case, test wasCreated explicitly to maintain existing logic.
Add test for the cases where the previous code broke the focus, both
for QWidget and QDialog.
Fixes: QTBUG-93005
Pick-to: 6.2
Change-Id: I39dc179c2d348054de3927aa8b69eecef4935511
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The Cocoa QPA plugin no longer tracks popups, but dispatches enter/leave
events when popups show and hide. So the special handling in tests and
QWidgetWindow can go away now.
Change-Id: Ib6ef00689de231996e5e57ecdd8fd0d4c861d68b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since macOS doesn't give us any event when a modal window opens,
we need to do so ourselves explicitly so that the current mouse
window gets a leave event when e.g. a popup opens, and an enter
event when the popup closes again. The case for modal dialogs is
partially handled by QGuiApplication already.
Note: We cannot rely on the transientParent of the opening/closing
window, as it's nullptr for QMenu windows even if the QMenu has
a widget parent.
Add a test for enter/leave events when a secondary window opens,
covering both the dialog and the popup case. For the dialog case,
we sometimes get two Enter events when the dailog closes, which
we have to tolerate for now.
To make the test pass on b2qt platforms, fix the offscreen plugin
to explicitly send enter/leave events in the same way as Cocoa
now does.
Fixes: QTBUG-78970
Pick-to: 6.2
Change-Id: If45e43e625e8362c3502c740154f6a6a8962b9e9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Showing, hiding, and showing a window can result in the Xcb QPA plugin
warning about
qt.qpa.xcb: internal error: void QXcbWindow::setNetWmStateOnUnmappedWindow()
called on mapped window
The point of the test is to verify that we get a paint event on a window
that is shown again after having been hidden, not to verify that async
windowing systems can handle a show/hide/show sequence. So wait for the
window being exposed before we hide it.
Pick-to: 6.2 5.15
Change-Id: If91a9926613645e78e332dacff34bd57e4034b6f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test passes consistently in local test runs on macOS 10.15.
Change-Id: I6f05b27d3cbf930475a435c41db267a00b1726b0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Move the status setting and resetting back into handleClose so that we
don't end up with it being set if handleClose is never called in response
to a close attempt. This can happen when QWindow's platform window has
already been destroyed.
Since QWindow::close handles that case gracefully and returns true,
we can safely call it multiple times.
Add test coverage to verify that we get exactly those close event
calls that we want.
Change-Id: Ica77bf17c26d923c3b79b1e5a688addbc88a6277
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test was failing because it didn't account for the platform behavior.
Task-number: QTBUG-30040
Pick-to: 6.2
Change-Id: I7c523c06f0bfa459c1532cee721718bebc1858c4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Also when closed by destruction, which as of today doesn't call
QWidget::close and therefore also not QWindow::close.
Pick-to: 6.2
Change-Id: I426255e2274eae9262243c769df2264fbaa915b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to close the window, end full screen mode on macOS, and free
platform resources. This is all done by QWindow::close. QWindow::close
closes the platform window, triggering a closeEvent to QWidgetWindow,
which then calls QWidgetPrivate::close_helper.
This way, closing a window via QWidget::close, QWindow::close, or
interactively by the user are all equivalent.
The QCloseEvent generated by the widget needs to be spontaneous for
window-system generated events (i.e. the user clicked the close button),
and non-spontaneous if the window closes because of a call to
QWindow::close. To keep track of whether the event originated in an
explicit call to QWindow::close, add a boolean to the QWindowPrivate.
Add a test case that verifies that the window resources is destroyed,
and that events are delivered as they should.
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Fixes: QTBUG-46701
Pick-to: 6.2
Change-Id: Iacb6a2c8d5e880b16b0c8f0c9257ed94bed36f5b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The plan for QObject::connect() (perfect) forwarders, such as
QWidget::addAction(), was to just use a variant of the Detection Idiom
to see whether QObject::connect() with the arguments as given would
compile and SFINAE out the forwarder otherwise.
It turns out that the "functor" overload of QObject::connect(), in
particular, is severly underconstrained and accepts e.g. QKeySequence
as a function object, only erroring out via a static_assert() in the
body of the function, and thus at instantiation time and not, as
needed, at overload resolution time.
At the same time, we don't really want QObject::connect() to SFINAE
out on argument mismatches between signal and slot, because the
resulting error messages would be ... unkind to users of the API. We
would like to keep the static_assert()s for easier error reporting.
Reconciling these two contradicting requirements has so far eluded
this author, so for now, to unblock progress, we explicitly black-
and, in one case, white-list possible arguments. Because QKeySequence,
in particular, is implicitly constructible from int(!), and therefore
any enum type(!), incl. Qt::ConnectionType, we need to do way too much
coding in the addAction() constraints. Hopefully, we'll be able to fix
the issue at the root cause, in QObject, before Qt 6.3 is out, but
until then, this is an ok-ish stop-gap measure.
Add thorough overload set checks (positive ones only, for now) to
tst_qwidget and tst_qmenu.
Change-Id: Ia05233df818bc82ecc924fc44c1b349af41cbbf1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... even though the documentation states that the action takes
ownership of the widget.
Change-Id: Ie5520fbda295a5a2774ff8b82165070e9d49e310
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Changing anything on a QWindow's QSurfaceFormat has zero and null
effects once the underlying native window has been created. Letting
QWidget update the format is wrong in this case, because we always
expect that the value returned from QWindow::format() reflects
reality.
(reality being the settings with which the underlying native resource
was created, which is typically frozen after QWindow::create(), not
the state of some QWidget attribute. There are certain exceptions to
this, such as when preparing to recreate the underlying native window,
in which case one will want to update all relevant fields of the
format based on the current values of the widget attributes, which is
exactly what QWidgetPrivate::create() implements, and that's good.)
Such a mismatch can have fatal consequences when OpenGL and friends
are involved, but this always depends heavily on the platform and
windowing system. For example, claiming that the alpha buffer size is
0 when the native window was created with 8, or vice versa, can break
OpenGL-related code (both in Qt itself and in applications), that
tries to create a QOpengGLContext configured based on what
QWindow::format() returns. If that format describes settings that are
incompatible with the actual underlying native window, we end up with
the classic Invalid pixel format, EGL_BAD_MATCH, and alike errors.
This is exactly what is happening when a QOpenGLWidget (or
QQuickWidget) is placed in a QDockWidget where one of the ancestors is
forced to native (winId() was called or WA_NativeWindow was set). When
undocking, various code paths in QWidget will try to update the opaque
flag of the widget, which in turn calls updateIsTranslucent. Now, if
this function unconditionally changes the alphaBufferSize in the
QWindow's QSurfaceFormat (even though this is completely futile to do,
it has no visible effect in practice), we get the problem described
above: rendering breaking down due to OpenGL contexts created with a
pixel format incompatible with the native window.
Prevent all this by not touching the format once the QWindow has a
QPlatformWindow. This is the right thing to do, regardless of the bug
in question: a window's (or context's or any other native resource
wrapping class's) format must describe the underlying native resource
and must never deviate, unless we are preparing to create a new native
resource underneath.
When it comes to the autotest, this changes the test added in
555661b625c40f21a6a3e4c73e928a6e8a46db20: the autotest logic is
inverted because what we should test for is that the QSurfaceFormat
stays untouched once the application makes a - futile - attribute
change on the widget.
Fixes: QTBUG-85714
Pick-to: 6.2 6.1
Change-Id: I7bf90711867e8a0fd474895625bf9530a7821fd5
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
child->widget() returns null if the layout item is not a widget.
Thus, calling removeWidget(nullptr) will remove all non-widget items
such as layouts or strechers.
Change-Id: I772c1158d0f7e8e2850b6e571b0405a2896f09b8
Pick-to: 6.0 6.1 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Those tests don't fail anymore and show in CI as BPASS, so we
can safely, hopefully, unblock them
Task-number: QTBUG-87429
Fixes: QTBUG-68974
Fixes: QTBUG-69166
Fixes: QTBUG-87403
Fixes: QTBUG-87411
Fixes: QTBUG-69083
Fixes: QTBUG-69084
Fixes: QTBUG-87426
Pick-to: 6.1
Change-Id: I831b955116c0f465319b9c5fc726dd98804d1c00
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
contentsMargins is a Q_PROPERTY on a QLayout. Qt 6.1 introduced
QLayout::unsetContentsMargins() to reset the contents margins to the
"default" ones (that the user can't know); that's the textbook
description of a RESET function for the property.
Add some tests also for unsetContentsMargins.
[ChangeLog][QtWidgets][QLayout] The unsetContentsMargins() function now
acts as the RESET function for the contentsMargins property.
Change-Id: I463d88363c11f4a15ad3d6af71401d8698de1d41
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QGridLayout::takeAt() and QLayoutItem *itemAt() only check the upper bound.
If the index < 0, these function will return invalid pointer.
Fixes: QTBUG-91261
Pick-to: 5.15 6.0 6.1
Change-Id: Idfb9fb6228b9707f817353b04974da16205a835c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Wayland doesn't support explicit window activation, so the
qWaitForWindowActive() function won't actually wait for the
window to be active.
On platforms like this, we just QTRY_VERIFY() for the window
activation instead.
Task-number: QTBUG-91418
Change-Id: I5f728e6a6bcaac283c026b60e6378b9d5aaf1be5
Reviewed-by: Liang Qi <liang.qi@qt.io>
The test assumed that a window was registered as the active
one immediately when it was exposed. This created a race
condition on Wayland, where we would often get the wrong
active window when simulating the events.
Task-number: QTBUG-91418
Change-Id: Ie41fe5adb339bbb43d5ee5db400a198e479de386
Reviewed-by: Liang Qi <liang.qi@qt.io>
Several tests failed due to side effects of client side
decorations. We explicitly disable this when initializing
the test to make things go smoother.
In addition, the setToolTip() test tries to set the mouse
cursor position programmatically, which is not possible
on Wayland.
And finally, the qWaitForWindowActive() falls back to
qWaitForWindowExposed() on platforms where explicit window
activation is not supported. This fixes a few issues, but
in cases like focusProxy(), it means we aren't actually
waiting for the WindowActivation event. Instead of testing
for exposed twice on such platforms (Wayland), we replicate
the logic from qWaitForWindowActive() instead and rely on
automatic window activation. If it fails, we do a QSKIP, so
this shouldn't cause any flaky test failures at least.
Task-number: QTBUG-91418
Change-Id: I767c881e7cdc91f43ad357294a2c6240ab1af43c
Reviewed-by: Liang Qi <liang.qi@qt.io>
Applications on macOS are automatically activated (put into the foreground),
when launched from the Finder, or via 'open' on the command line. But when
launched from the terminal, e.g. foo.app/Contents/MacOS/foo, the application
will launch in the background (inactive).
In Qt we override this behavior, activating the app even when launched from
the terminal, as a convenience, as long as the application is a GUI application.
Unfortunately this means that when tst_qapplication launches a subprocess that
is a GUI app, it will steal activation from tst_qapplication, which in turn
will break tests that later try to activate a window and check that the window
is then active. The window will not be active until the application is active.
We can work around it by preventing Qt from activating the application, but
ideally we'd find a better solution to this, as we don't want to sprinkle
overrides all over our tests.
Fixes: QTBUG-90699
Pick-to: 6.1 6.0 5.15
Change-Id: If53a86548002b739df0c0a7153d6244924a4a205
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When setting the application's focus widget we search for the next
child widget that can hold the focus and call its setFocus() method,
which also updates focus widgets of all its parent wigets.
In case if the focus widget is the active window itself, we only set it
as the application's focus widget, but we don't update the focus widget
of the active window itself. Because of this the focusWidget() method
always results nullptr for the active window. This prevents from setting
the focus back to active window after the focus has changed (for example
after a context menu is closed, as in the bugreport).
Transfer the focus to active window by calling the setFocus() method, as
it is done in case of transferring the focus to any other widget.
Pick-to: 6.0 5.15
Fixes: QTBUG-85846
Change-Id: I91ebf182fd5bb7d451a1186e2f3e38c8d48acc4e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a default font was not registered for the widget's class, it returns the default font of its nearest registered superclass.
Fixes: QTBUG-89910
Pick-to: 5.15 6.0
Change-Id: I6e6b2c6a0044462f84db9f76a03be0c6cfaaae8e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
setTabOrder was not considering the case, when a child widget has
its focus proxy set to its parent widget. This happens, for example,
for the QLineEdit that is nested inside the QAbstractSpinBox.
For such cases the lastFocusChild was calculated incorrectly, and, as
a result, such child widgets were not correctly positioned in the
focus chain. This could lead to an error while backtabbing.
Here is a brief example. Suppose we have 3 widgets arranged like this:
auto spinBoxOne = new QDoubleSpinBox;
auto spinBoxTwo = new QDoubleSpinBox;
auto button = new QPushButton;
Then the default widget focus order is:
- spinBoxOne
- lineedit (from spinBoxOne)
- spinBoxTwo
- lineedit (from spinBoxTwo)
- button
Before this commit setting the explicit tab order changed the focus
order in the following way:
QWidget::setTabOrder(spinBoxOne, spinBoxTwo);
QWidget::setTabOrder(spinBoxTwo, button);
- spinBoxOne
- spinBoxTwo
- button
- lineedit (from spinBoxOne)
- lineedit (from spinBoxTwo)
In this case, backtabbing from spinBoxOne actually leads us to
lineedit (from spinBoxTwo), which refers to spinBoxTwo.
And so we're stuck in a loop.
This commit fixes the issue by handling such special case, and
preserving correct focus order.
Note: the actual unit-test in this patch uses QLineEdit instead of
QPushButton, because one can't tab to buttons on macOS by default.
However the general idea is the same.
Pick-to: 6.0 5.15
Fixes: QTBUG-81097
Change-Id: I5d16da7733a4d63f809cab28b8ca9e116b87cffa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Android packages the test instead of qapplication folder, thus the
BLACKLIST file for Android tests needs to be in "test" folder
instead.
Task-number: QTBUG-87666
Task-number: QTBUG-87025
Change-Id: I065072fa8a030cf9d15e057869e74a8c736c80ab
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This makes it feature comparable with QAction, and makes it possible
to use as a backend for QAction, and fixes a few missing alternative
keybindings in qtwidgets.
Change-Id: Iaefc630b96c4743fc5ef429dc841870ddd99fc64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
All QFontDatabase APIs are static, use them accordingly.
Task-number: QTBUG-88114
Change-Id: I0e4a7508646037e6e2812611262eed8b6d7ad3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
CMake builds are special and need to know the path to the source dir.
This is handled automatically by QTEST_MAIN, but tst_qapplication
doesn't use QTEST_MAIN. Thus we need to call
QTEST_SET_MAIN_SOURCE_PATH manually.
Task-number: QTBUG-87137
Change-Id: Ib2c461f0da0a3d9a2f571f37476b750a606065f7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Testing the mouseMoveCount before XFAIL'ing before then testing the
mouseRelaseCount was anyway wrong.
Change-Id: I666f143ff15088562fc63f833f5785f870de6f26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Silence the warning, and test event delivery in addition.
Change-Id: I59c49a2ac70ecd32429116b76643700a7ad5ce3e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_QApplication::sendEventsOnProcessEvents() and
tst_QItemDelegate::editorKeyPress()
There is some issue with the glib event dispatcher.
Task-number: QTBUG-87137
Pick-to: 5.15
Change-Id: I79a983192edef3c3560a4296cc9dea2dfc2ee1b0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change lots of code to avoid the deprecated operator+() or implicit
casts to int.
Change-Id: I0c343cd5b28603afdf1214eefb85e928313345e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a source incompatible change for widget implementors.
Leaving the old enterEvent as a virtual overload is problematic due to
shadowing. Best to make a clean cut, widget reimplementors will get a compile
time warning if they mark their override as such, or if they try to call the
parent class implementation.
Addresses ### Qt 6 comment.
[ChangeLog][QtWidgets][QWidget] The virtual enterEvent handler now receives
a QEnterEvent, which contains information about mouse position and button
states, rather than a plain QEvent.
Change-Id: I233f594fd79c0c090983b3db8532913d00132fde
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Follows the QWindow semantics, and is a replacement for creating
a QWidget with a QDesktopScreenWidget as the parent.
We can now remove much of the special handling of QDesktopWidget and
the Qt::Desktop window type, and get rid of QDesktopScreenWidget.
Add a manual test that allows local testing. Our CI environments
only have a single screen, and no multi-head display server setup
which is the primary case where QWidget::setScreen is interesting.
For the more common case of a virtual desktop, QWidget::setScreen
has no real impact (just as QWindow::setScreen doesn't).
Change-Id: Id0099e069d316741bacd8c795c396ccad37be297
Fixes: QTBUG-85483
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
A QWindow should only become Active when it's inside an
NSWindow that is Key. If the NSWindow is not key, we need
to wait for it to be so, and handle window activation
from QCocoaWindow::windowDidBecomeKey() instead. Otherwise
Qt will report a QWindow as Active when, in reality, it
is not.
Change-Id: Ib7e63b374f26af527a668c7f7d863c4168a4446d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Before 0a93db4d82 we would polish the
application palette even when it was the default palette, as we
always recreated the system palette each time a style was set.
After the change we skipped polishing the palette unless it was set
by the user, under the assumption that the style would set its
own default palette if it wanted to override the system palette.
This turned out to break the style's ability to slightly tweak the
palette via polish (versus the more full on standardPalette approach).
We now polish both the default palette and user palettes, and we do
so as part of the normal palette update logic. This ensures that
the style also gets a chance to polish the palette when the platform
theme changes.
The polish will not have an effect on the resolve mask of the palette,
as the polish is conceptually the same as a base palette, and should
not affect e.g. Qt::AA_SetPalette.
Fixes: QTBUG-85469
Fixes: QTBUG-85188
Pick-to: 5.15
Change-Id: I869e9c442b177de4f1dc49eb75220709306f4d12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt::UNICODE_ACCEL had no effect since at least Qt 4.0. We can drop
it in Qt 6. The whole Qt::Modifier enumeration is still widely
used, so we can't drop it yet, but we should aim at doing so in
Qt 7. Add a note.
[ChangeLog][QtCore][Qt::Modifier] The Qt::UNICODE_ACCEL enumerator
has been removed. It had no effect since Qt 4.0.
[ChangeLog][QtCore][Qt::Modifier] Usage of the enumerators in
the Qt::Modifier enumeration is discouraged. The enumeration
will likely get removed in the next major version of Qt.
Change-Id: If25f30d920878d32903b91a38044f5da042c7eab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Amend d934fd7f54, which was too naive in
assuming that any change to the popup stack while a popup had been
pressed into should result in mouse move events to be delivered without
buttons.
Instead, add a new flag that is set explicitly when the qt_popup_down
widget is closed, and remove buttons from the move move events only when
that flag is set.
Add the sorely missing test case as well, even if we have to accept that
not all behavior can be tested reliably. Ie. on macOS, the simulated
mouse event differs from the event we do get from the QPA plugin or the
system; on Xcb, some of the behavior depends on the window manager.
This is something we could try to clean up for Qt 6.
Change-Id: Ibf0a0a6fb7d401915057365788947e5a35aa20c3
Fixes: QTBUG-84926
Task-number: QTBUG-82538
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fixes regression introduced in b4981f9d4c,
due to which it was possible to back-tab into a widget even though it or
its focusProxy had a NoFocus policy.
As a drive-by, split the complicated if-statement up a bit for improved
readability.
Change-Id: Ib0ac2604076e812e340b11534c23ae8ae958d082
Fixes: QTBUG-76924
Pick-to: 5.15 5.12
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Starting from Qt 5.11 QWindow::event is called after QDialog::closeEvent
which would cause a crash if "delete this" was called on closeEvent. The commit
that changed this was e0b5ff4ad5. Added
a check before QWindow::event call utilizing QPointer to prevent the
function call in case object is destroyed by a user in close event handler.
Change-Id: I64a4a0f3271714e55bf7e806177f0d8b39b67fa3
Fixes: QTBUG-84222
Pick-to: 5.15 5.12
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Tests focusProxyAndInputMethods and
multipleToplevelFocusCheck will be blacklisted
Task-number: QTBUG-84259
Change-Id: I7d5baf1e700192eed3c7c8dcfe671e247f11b8c7
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The class is documented as obsolete, and the majority of APIs is marked
as deprecated. In this first phase, remove all explicitly deprecated
APIs and trivial implementations.
The test case is complete removed; what's left when code that uses any
of those deprecated methods is removed is not testing anything
meaningful.
For some methods, there is no practical replacement using QScreen yet,
and QDesktopWidget is still used in QWidget internals. Those require
refactoring to only use QScreen before the rest can be removed.
Change-Id: I8f7c968ec566820077221d37b817843758d51d49
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rather than have a paletteChanged() signal which can be connected to for
tracking when the application palette has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated paletteChanged() signal
in favor of QEvent::ApplicationPaletteChanged.
Change-Id: I95da211e30590e357007cc14d8ee266baceba7b3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... without moving the mouse.
This allows to update drop action and cursor.
Task-number: QTBUG-56218
Task-number: QTBUG-82934
Pick-to: 5.15
Change-Id: I8b0ac2a008a9dbcc4c2d6abce282e6f169c2f542
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Handle wheel grabbing via wheel_widget in a single place, and
propagate events in the same way for all (spontaneous) events.
Handle ScrollMomentum the same way as ScrollUpdate to allow
partial sequences.
Fix the incorrect ignoring of wheel events by default; like all
other input events, they are now again accepted by default and
ignored in the default event handler implementation of QWidget.
This way, implementing the handle suffices to accept the event.
Note that QWidget::wheelEvent doesn't need to be changed, as the
event is ignored there today (an oversight of the change made in
f253f4c3, perhaps).
This also fixes changing of direction of a wheel event while
the event sequence is grabbed by a widget.
Change-Id: Ia0f03c14dede80322d690ca50d085898a0497dbe
Fixes: QTBUG-67032
Task-number: QTBUG-79102
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This amends 23b998fa45, and the commits
3e7463411e and
947883141d. This change restores the
pre-5.13.1 behavior of setFocusProxy to not move focus away from a
previously set focus proxy.
With the previous changes, focus would move away from a proxy when a
new proxy is set, if the old proxy had focus. While there are arguments
in favor of this behavior, it is a change of behavior that shouldn't
be introduced to 20+ years old functionality in order to fix the real
bugs addressed by the initial commits.
Instead, move focus only to the new proxy when the focus widget was
the widget that gets a focus proxy.
[ChangeLog][QtWidgets][QWidget] setFocusProxy no longer moves focus
away from a previously set focus proxy, restoring pre-Qt 5.13.1
behavior.
Change-Id: Icf2ad7cba5b860014aeef91cb274c442a2ab9d42
Fixes: QTBUG-83720
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
For kinetic wheel events, Qt tries to make sure that all events in the
stream go to the widget that accepted the first wheel event.
It did so by directing all events from the stream to the widget from
which the spontaneous event was returned as accepted.
However, that widget might have passed the event on to some other
widgets; e.g QScrollArea forwards wheel events from the viewport to the
relevant scroll bar. The event might then have come back accepted only
because parent propagation kicked in (the scrollbar might not accept
the event, so the parents get a chance, and some parent's scrollbar
ultimately accepts the event).
In this scenario, the wheel widget would be the viewport under the
mouse, when it should have been the scrollbar of the parent. The
next events from the stream were then delivered to a widget that didn't
scroll; and parent propagation is not (and should not be) implemented
for the case where Qt has a wheel widget.
Instead, make the first widget that accepts any initial wheel event
the wheel widget, even if the event was not spontaneous. With this
change, all events from the stream are delivered to the widget that
actually handled the event. That has the effect that ie. a viewport
of a scroll area only gets the first event; all following events are
delivered directly to the scrollbar.
The test case added simulates the different scenarios - nesting of
scroll areas, classic wheel events and a stream of kinetic wheel
events.
[ChangeLog][QtWidgets][QApplication] Wheel events from a device that
creates an event stream are correctly delivered to the widget that
accepts the first wheel event in the stream.
Change-Id: I5ebfc7789b5c32ebc8d881686f450fa05ec92cfe
Fixes: QTBUG-79102
Pick-to: 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When hiding a popup by clicking outside of its area, a window is closed.
Depending on the platform specific implementation details, this can
result in multiple calls to QWidgetPrivate::setVisible(false). The first
one from the handling of the close event in QWidgetWindow::event; the
second from the destruction of the window in QWindow::event.
Since the first call already sets the Qt::WA_WState_Hidden flag before
calling QWidgetPrivate::hide_helper, we can test if the flag is set
and skip the second call if it is.
The included test does not reproduce the issue, as that issue only
reproduces if the close event is generated by the mouse event handling
in the Cocoa platform plugin (which doesn't call QWidget::close, but
rather sends a native close event to the platform window). However, it
verifies that the fix doesn't introduce any regressions.
Change-Id: Id0eda9326a8adf0cc1f6a3840f9ac0b635ab39a1
Fixes: QTBUG-79134
Pick-to: 5.15
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the declaration, leave them in as comments so that the gaps in the
numbering of the values doesn't create confusion.
Change-Id: I92ff299416896c471e7c7d80b988cd4642b6b756
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Rather than have a fontChanged() signal which can be connected to for
tracking when the application font has changed, then it is better to
use the event that is sent to all windows and the application itself.
That way it is easy for a window/widget or item that cares about the
change to the application font to catch it in the event() function.
[ChangeLog][QtGui][QGuiApplication] Deprecated fontChanged() signal in
favor of QEvent::ApplicationFontChanged.
Change-Id: Iae8e832238fc85e385a52305bc04f16e597454b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This follows up on commits 3e7463411e and
947883141d.
The changing of the pointer of QApplicationPrivate does not transfer
focus properly. It updates the pointer, but it doesn't deliver events
or update the widget hierarchy's focus chain. The result is that
multiple line edits might show a blinking cursor.
Instead, use QWidget::setFocus when the focus proxy has changed while
it had focus, and pass OtherFocusReason rather than NoFocusReason.
Add a basic test for QWidget::focusProxy, which exercises this code
path and verifies that pointers are consistent when focus changes as
a side effect of modifying the focusProxy.
Change-Id: I15a4d868bab2b590cfe4a1daa6a3c8cebc9c9ca2
Fixes: QTBUG-83720
Fixes: QTBUG-79707
Pick-to: 5.15
Reviewed-by: David Faure <david.faure@kdab.com>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
DeleteLaterWidget is a main application window of the test. So, its
show() function should be called explicitly before starting the main
event loop. Otherwise, it remains hidden for the whole time, which
causes an incorrect emission of QApplication::lastWindowClosed signal
when a dialog window is closed in the middle of the test.
Also, fix synchronization between deferred deletion and timer event.
Change-Id: Id3ce5adbcd9e5e22508825c52025eeea70202354
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Quit the event loop once the object is destroyed.
Change-Id: I6df1cfe867daacb6af56eb84646be91d98a2f545
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test can trigger timeouts in COIN, split into subtests.
Change-Id: I1fa5d52422275f89b2858d90c5979632aa7058e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Duplicating the number of classes is a high price to pay to be able to
have some QAction functionality behave differently, or be only available
in widgets applications.
Instead, declare the entire API in QtGui in QAction* classes, and
delegate the implementation of QtWidgets specific functionality to
the private. The creation of the private is then delegated to the
Q(Gui)ApplicationPrivate instance through a virtual factory function.
Change some public APIs that are primarily useful for specialized tools
such as Designer to operate on QObject* rather than QWidget*. APIs that
depend on QtWidgets types have been turned into inline template
functions, so that they are instantiated only at the caller side, where
we can expect the respective types to be fully defined. This way, we
only need to forward declare a few classes in the header, and don't
need to generate any additional code for e.g. language bindings.
Change-Id: Id0b27f9187652ec531a2e8b1b9837e82dc81625c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When _NET_WM_STATE_HIDDEN is not contains in the _NET_WM_STATE
window property, the window should not be considered to be minimized
According to
https://specifications.freedesktop.org/wm-spec/1.3/ar01s05.html
_NET_WM_STATE_HIDDEN should be set by the Window Manager to indicate
that a window would not be visible on the screen if its desktop/viewport
were active and its coordinates were within the screen bounds. The
canonical example is that minimized windows should be in the
_NET_WM_STATE_HIDDEN state. Pagers and similar applications should use
_NET_WM_STATE_HIDDEN instead of WM_STATE to decide whether to display a
window in miniature representations of the windows on a desktop.
For mutter/GNOME Shell, without _NET_WM_STATE_HIDDEN, window manager
will not reply XCB_ICCCM_WM_STATE_ICONIC settings in WM_CHANGE_STATE
client message.
Task-number: QTBUG-76147
Task-number: QTBUG-76354
Task-number: QTBUG-68864
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Ic9d26d963979b7f0ef4d1cf322c54ef8c40fa004
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
If a widget backed by a QWindow is moved we need to translate the window
geometry into a position relative to the parent widget. In most cases this
was incidentally working due to widgets backed by QWindows always having
QWindow parents too, so the QWindow position was applicable to the widget
as well. But when Qt::WA_DontCreateNativeAncestors is used this is no
longer the case, and we would end up with a widget geometry that included
the parent positions all the way up to the next native widget.
The updatePos() function has been squashed into handleMoveEvent(), since
we need to ensure the position in the move event sent to the widget is
correct as well.
Change-Id: I55894ad7ab42a6d4d65e446a332ecdd7dcdcc263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
This test fails sporadically on OpenSUSE, with the widget receiving
multiple resize events. Assuming that window management kicks in at
unpredictable moments and changes the geometry of the managed widget
possibly in several steps, we try to turn off all window management
on X11.
Change-Id: I7d2120c02eb870040b2ee94986a2ac5608d5a423
Fixes: QTBUG-66345
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Provide pointer to member function overloads for the QShortcut ctor. The
ctor with two functors but no contexts is not provided since it creates
ambiguousness.
[ChangeLog][QtWidgets][QShortcut] QShortcut ctor has now pmf overloads
Fixes: QTBUG-77816
Change-Id: Ic9a759cde5150dbb94c2fd351b88ee8e447e0852
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Only the widgets/kernel tests were made to compile since also
the buttons depend on the action feature and it would become too
involved.
Task-number: QTBUG-69478
Change-Id: Id5bf88bc108f2bbb14dce8625bfdcb7eb0deb8e3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Simply moving QAction to QtGui was not deemed possible since
it operates on a set of controls of some kind. The approach to
extract a base class was taken instead, named QGuiAction
following the QGuiApplication scheme. QAction remains in
widgets, but changes base class.
For QActionGroup, the functions addAction(text/icon), which
create an action, cannot be implemented in QtGui, hence a base
class is needed, too (unless they are deprecated and removed).
- Extract base classes providing functionality not based on
QtWidgets, using virtuals in QGuiActionPrivate to provide
customization points
- Change QActionEvent to take QGuiAction, removing
the need to forward declare QAction in QtGui
[ChangeLog][QtGui] Added QGuiAction(Group) and made the equivalent
existing classes in Qt Widgets derive from them. This provides
basic functionality for implementing actions in QML.
Task-number: QTBUG-69478
Change-Id: Ic490a5e3470939ee8af612d46ff41d4c8c91fbdf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When a window is closed, then it will cause the child windows to be
closed as well as a result. Therefore in order to ensure that they are
shown again as a result, we need to remove the WA_WState_ExplicitShowHide
attribute if the widget was not already hidden before. This enables us to
test for this attribute when calling showChildren(), so that if the
window has a windowHandle then we can make sure that this widget is shown
again.
Fixes: QTBUG-73021
Change-Id: I1186242b889899dfcd38d782a67567348e2055ee
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Move the feature to corelib so that the QMetaType enumeration
values can be properly excluded and there is no need for a
dummy class.
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Task-number: QTBUG-76493
Change-Id: I02499ebee1a3d6d9a1e5afd02517beed5f4536b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
QDesktopWidget is marked as obsolete in docs, but it is not yet
completely deprecated, some of its methods are still in use.
Replace uses of the following methods marked as obsolete:
- QDesktopWidget::screenNumber(QWidget*) -> QWidget::screen()
- QDesktopWidget::screenGeometry(QWidget*) -> QWidget::screen()->geometry()
- QDesktopWidget::availableGeometry(QWidget*) -> QWidget::screen()->availableGeometry()
Task-number: QTBUG-76491
Change-Id: I2cca30f2b4caa6e6848e8190e09f959d2c272f33
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Note that android builds will be broken after this merge and
regeneration, because we don't currently handle the minimum required
changes that were brought in with the Android multi ABI support
that comes from 5.14.
This will have to be addressed in a separate change.
For now the build on Android will fail while compiling due to incorrect
generation of LIB_SUFFIX with QT_ARCH.
Change-Id: Ia4a871f4b7ddd0da11caf5f34e10a599a97bb55d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
- Replaced the usages of the following deprecated APIs:
* QDesktopWidget::screenCount() -> QGuiApplication::screens().size()
* QDesktopWidget::screenGeometry(int) -> QGuiApplication::screens().at()
* QDesktopWidget::screenNumber(QPoint) -> QGuiApplication::screenAt(QPoint)
- Added notes for the QWidget *QDesktopWidget::screen(int), which
currently has no replacement.
- Fixed the tests to build conditionally, only when these APIs are
enabled.
Task-number: QTBUG-76491
Change-Id: I2fdec96d0a6a4fc782c53549b05a5556412b8305
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since 9c8d1ca18b, the test would fail
when High DPI scaling is enabled:
FAIL! : tst_QWidget::translucentWidget() Compared QImages differ in device pixel ratio.
Actual (actual): 2
Expected (expected): 1
.\tst_qwidget.cpp(8913) : failure location
Set the device pixel ratio on the expected pixmap to fix this.
Change-Id: I517495931c2c6b1f49125bb4b5836e304bdbf545
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QShortcut::event() did not call the base class implementation
QObject::event() which caused that e.g. QEvent::DeferredDelete was not
handled.
Fix it by calling QObject::event() when the event was not handled.
Fixes: QTBUG-66809
Change-Id: Ideebc980bc658f8f2b9ec4417e738bccda5eeab5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Base it on QWidgetPrivate::associatedScreen(), but make a larger
effort to find a screen in case the widget is not shown yet.
Rename QDesktopScreenWidget::screen() to something else to avoid
clashes.
Task-number: QTBUG-62094
Task-number: QTBUG-53022
Change-Id: I36ba5ef5f0645a4ac89da0b38a391f7057b2f49c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Quoting a blog from 2009, "this class is responsible for figuring out which parts
of the window surface needs to be updated prior to showing it to screen, so it's
really a repaint manager."
https://blog.qt.io/blog/2009/12/16/qt-graphics-and-performance-an-overview/
What better time to do the rename than 10 years later!
Change-Id: Ibf3c3bc8c7df64ac03d72e1f71d296b62d832fee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It was added for Symbian almost 10 years ago (d7057e7c1f1a), for a somewhat
dubious use-case. The Symbian code is since long gone (ae30d7141), so the
remaining pieces are just adding complexity to the already intricate workings
of the QtWidgets backingstore/painting logic.
Task-number: QTBUG-8697
Change-Id: I82af610a8ac26719c588ac63f06b4501f59b400d
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
(cherry picked from commit 2e0b0be2ce)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It was added for Symbian almost 10 years ago (d7057e7c1f1a), for a somewhat
dubious use-case. The Symbian code is since long gone (ae30d7141), so the
remaining pieces are just adding complexity to the already intricate workings
of the QtWidgets backingstore/painting logic.
Task-number: QTBUG-8697
Change-Id: I82af610a8ac26719c588ac63f06b4501f59b400d
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
... in case of a test failure. QAutoPointer is private API, but here we can use it.
Change-Id: I45b734385cd13fdea95d0100f2d8152f969612f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This change makes the PREFIX parameter a required parameter if the
target does not specify a default. This way the behavior is clear when
reading the code: add_qt_resource() without PREFIX means it must come
frmo the target.
Change-Id: I79024e70e7b4d32a5164b93aa08ec9ff409b2d39
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
- Replace the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Build docs for deprecated APIs conditionally, based on deprecation
version. Remove the docs of methods deprecated since 5.0.0, these
methods are not compiled anymore.
- Modify the tests to make them build when deprecated APIs disabled:
* Make the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods
are enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, add tests for the replacement
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Task-number: QTBUG-76541
Change-Id: I6aaf0a1369c479fb880369a38f2b8e1e86b46934
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QApplicationPrivate::focus_widget became a dangling pointer
in the following scenario:
A widget first gets focus and later on gets a focus proxy.
QApplicationPrivate::focus_widget was still pointing to the initial widget.
Upon destruction, QWidget::hasFocus() [which follows to the focus proxy
and then compares with focus_widget] was therefore false for both
widgets. So QWidget::clearFocus() didn't call
QApplicationPrivate::setFocusWidget(0) for either of them. As a
result, focus_widget remained set, and became dangling.
In real life, this happened with a QWebEngineView, which the application
gave focus to upon creation. At that time it doesn't have a focus proxy
yet. That happens later, in QWebEngineViewPrivate::widgetChanged.
https://bugs.kde.org/show_bug.cgi?id=381793
Change-Id: Ifee610bb76a2d4d2797b98ece9bffe5fffe3c6a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The public QWidget::create still has them, but we don't need to
propagate them on - that just makes debugging the window creation
flow harder.
The window argument to QWidget::create is technically used to
guard an early exit in the function, but to keep behavior the
same we leave it for now.
Change-Id: Ic0287575aa25f1272e216adc1b75e34d6f55f6d9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
RenderHint::HighQualityAntialiasing and NonCosmeticDefaultPen are
obsolete since Qt5 but not marked as such. Therefore add
Q_DECL_ENUMERATOR_DEPRECATED_X now so those two enumerations can be
removed with Qt6.
[ChangeLog][QtGui][QPainter] HighQualityAntialiasing and
NonCosmeticDefaultPen are marked as deprecated and don't have an effect
anymore
Change-Id: Ib0c966a078a1d23d492d0255288e2066c50e87b6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Remove the mainW, edit widget member variables from the test and use
widgets instantiated on the stack in the tests.
For the data-driven tests, use a static QScopedPointer, which is
reset by a newly introduced TestEnd action.
The book-keeping logic maintaining a list of shortcuts can then be
removed.
The setupShortcut() helpers are simplified and the special case
TestWidget::SendKeyEvent is replaced by a lambda in
keypressConsumption().
Task-number: QTBUG-76493
Change-Id: I15dfa86dfa0666ed8288b7190e37cdb862c261c8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QWidgetPrivate::updateIsTranslucent sets the surface format of the
window with the alpha based on the translucency attribute, so we need
to call this function when the attribute value changes. The test can
confirm that the window's requested surface format has changed, we
can't rely on what is actually set, and don't have to rely on
hard-coded values like 8bit alpha.
While WA_NoSystemBackground needs to be set for WA_TranslucentBackground
to have an effect, we can't clear the attribute when clearing
translucency (as it might have been set explicitly).
Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff
Fixes: QTBUG-60822
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Use nullptr
- Fix static method invocations
- Use QString() instead of QString("")
- Use override
- Use member initialization
- Remove unimplemented code related to status bars
- Use Qt 5 connection syntax
- Fix apparent oversights in ambiguousItems() and
unicodeCompare(),where the 2nd shortcut was assigned to the wrong button
- Use Q_ENUM for the enumerations which will output the value in
QCOMPARE and automatically declare them to be a metatype
- Use enums in helper function signature for clarity
Task-number: QTBUG-76493
Change-Id: I0ed6ee7ee8dc2dbb48160a8383e6ed29164c3449
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The completer popup has focus, making QShortcut direct to it's window
rather than to the window the completer belongs to. As QShortcut handles
the case for Tool windows that have a parent, but doens't do the same
for popups. And they shouldn't be treated the same way, as a context
menu popup for a e.g. text edit should in fact block the text edit's
shortcuts while open.
However, the completer popup is special, in that it explicitly makes the
widget completes for its focusProxy, which is what we can use to fix
this issue.
Change-Id: Ie7177d39668b3af14a1d9e0ee5d93eca9c67c8af
Fixes: QTBUG-4485
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
81e298a51d fixed a case where the focus
chain was screwed up when the order was already correct. This worked
correctly in most cases but not when the next focus widget of the first
one had Qt::NoFocus.
The optimization check if lastFocusChildOfFirst is the same as second is
thrown away since it now does not longer screw up the focus chain and
the save would only be four pointer assignments.
Fixes: QTBUG-75388
Task-number: QTBUG-10907
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Change-Id: I581ed532156c34ea970123afd063194aab016304
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
They are going to be deprecated soon.
Use a lambda to mimic the adjacent addActions() calls.
Also, I didn't want to add a scope or extend the lifetime
of the return value of actions() until the end of the
function, and
for (QAction *action : actGroup.action())
would detach. I'd've made it a helper function, but it's
used only once, so... a lambda.
Change-Id: I2b3aae463036fd61a9cca7b4ef991b8752869bf3
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use a fuzz check (cf 6309062722) and a minimum
size similar to tst_qwidget to make the test pass on large monitors with or
without active scaling.
Change-Id: I5a9e28e38e1d007057894c349c94f0e6fe12009c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Use nullptr
- Fix C-style casts
- Fix redundant bool expressions
- Fix else after return
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax
- Remove unused variables
- Streamline code in some cases
Change-Id: I1350b382b0b7d0f3198039fdc78892cfa1dd498d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Use nullptr
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax; use lambdas where applicable
to remove helper slots
- Streamline code in some cases
- Replace helper function to convert touch points by the one in
QWindowSystemInterfacePrivate
- Use a logging category for the debug outpt, silencing some output
Change-Id: Ia46c7ad7c08f3afc8e5869ea99b66e406de97781
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This way we don't need to run rcc during cmake time
Change-Id: Id92111bce6c2b6798f3b18552cea82c8d07c4fc0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Move the fuzz check introduced by
6309062722 to a shared header for
reuse. Use it in in more places to account for rounding errors
introduced by odd window frame sizes when scaling is active.
- Use the test widget size to ensure windows do not violate the
minimum decorated window size on Windows when scaling is inactive
on large monitors.
Task-number: QTBUG-46615
Change-Id: Icf803a4bc2c275eadb8f98e60b08e39b2ebebedd
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Skip based on support for window activation instead of platform. Makes it clear
why the tests are skipped, and also enables them automatically if we implement
a shell extension that adds support for it.
Task-number: QTBUG-66849
Change-Id: I322aba5ce5f8db651db7b71f223ffacec037c920
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
DragEnter events always should start with the default state, which
is accepted = false. This was a copy-and-paste error introduced by
f8944a7f07.
Fixes: QTBUG-73977
Change-Id: I34b3ea97c9b4f4fc040a9e6f1befd6124533361d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When using a style that wants to draw into the layout's margin (like
macOS style does with group box titles), parts of the widgets would be
clipped by the parent if the available margin is smaller than necessary.
This moves the x/y coordinates to at least 0/0, and adjusts width and
height accordingly.
[ChangeLog][QtWidgets][QLayout] Prevent clipping of group box titles
on macOS (and similar styles that draw into layout margins)
Change-Id: I32148a92858c13fb2325da4d0a2a58996e0e8930
Fixes: QTBUG-67608
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When set to ExclusiveOptional, the new exclusionPolicy property let the
user uncheck the active checkable action in an exclusive group.
[ChangeLog][QtWidgets][QActionGroup] Added new exclusionPolicy
property. Set it to ExclusiveOptional to allow unchecking the active
checkable action in an exclusive group.
Change-Id: I61a9885cfd076d631cddf8c08313e4b488e5dc38
Fixes: QTBUG-71160
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test passes, according to our metrics it kept on failing on 16.04
and on OpenSuse.
This reverts commit d2015b4d06.
Change-Id: Ibe81f848238d9df651a74f9fd82ac636c2c249f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Now that MSVC (presumably) supports templates, we can merge the QRect
and QRegion versions of the functions into one.
The function has been renamed to invalidateBackingStore to better
reflect what it's doing.
Change-Id: I0e94a0cabd286cf97f2ba718a42ee0425f59d3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Volker Hilsheimer
Dimitrios Apostolou
Edward Welbourne
Tor Arne Vestbø
Marc Mutz
Laszlo Agocs
Allan Sandfeld Jensen
Piotr Srebrny
Assam Boudjelthia
Giuseppe D'Angelo
Zhang Yu
Eskil Abrahamsen Blomfeldt
Samuli Piippo
Sona Kurazyan
ChunLin Wang
Ivan Solovev
Joerg Bornemann
Liang Qi
David Skoland
Friedemann Kleint
Alexandru Croitor
Kirill Burtsev
Lars Knoll
Morten Johan Sørvig
Shawn Rutledge
Karsten Heimrich
Richard Moe Gustavsen
Lars Schmertmann
Jarek Kobus
Oliver Wolff
Miika Pernu
Heikki Halmet
Andy Shaw
Alexander Volkov
Qt Forward Merge Bot
Alex Trotsenko
Tor Arne Vestbø
Simon Hausmann
JiDe Zhang
VaL Doroshchuk
Leander Beernaert
Ulf Hermann
Christian Ehrlicher
Frederik Gladhorn
Johan Klokkhammer Helsing
Daniel Smith
Ville Voutilainen
David Faure
Alexander Volkov
Tony Sarajärvi
Tobias Hunger
Jędrzej Nowacki
Gatis Paeglis
Simone Gaiarin
Jan Arve Saether