In QAuthenticator "detach()" does not do what you expect.
First off it doesn't detach at all, and secondly it will reset the phase
that the authentication is in. This last part is intended, but it has
one issue: if setUser/setPassword is called with the same arguments
every time we ask for credentials then we never reach a fail-state since
it thinks we will have a new chance to authenticate.
Pick-to: 5.15
Change-Id: I02e2e42242220f3fced3572323e6492429cf173e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's problematic if we have already used these credentials and it
failed. Since then we emit authenticationRequired only for QNAM to
intercept it and "helpfully" suggest we use the same credentials again.
By moving on we can check the cache or ask the user about the necessary
credentials.
Pick-to: 5.15
Change-Id: Idaac5ae71167462369b66194ab6b1f77113d636a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Although this is more of a QNAM thing.
In some cases what we load from the cache might be credentials we have
already tried (and failed with, thus leading us to emit the
authenticationRequired signal). With this patch we will fall through
more often and ask the user for credentials.
Pick-to: 5.15
Change-Id: If2a556883c3ea5b0b225f4df273d38353b552b54
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Windows only so far, need a similar patch for *nix, or an alternate
approach when there is no server set up.
Pick-to: 5.15
Task-number: QTBUG-85123
Change-Id: Iff7a6b1540a2f1984153a237eea07c7bb1970064
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we compiled without support for it then we shouldn't consider it an
option either.
Pick-to: 5.15
Change-Id: If6e0a6afa738f375e360bf3d439196b39e47bee8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It has been in Qt for some years now and 6.0 marks a good point to
enable it by default. The exception is connectToHostEncrypted where we
still require the users to enable it explicitly since there's no logical
way to disable it.
[ChangeLog][QtNetwork][QNetworkAccessManager] HTTP/2 is now enabled by
default.
Fixes: QTBUG-85902
Change-Id: Ia029a045727cc593d77df9eb3a5888522ad19199
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It really could only manifest itself if you started a request and then
immediately cancelled it and then started another one to the same
site. But only if in a certain race outcome - the connection that the
backend was establishing had to finish connecting after aborting but
before a new request had been queued!
Change-Id: I7cad2cf4ac1f64cc838498cefa076cd2c6d26701
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mostly related to qstrlen().
Change-Id: I69e2052c83766e4fc466ed398d0d0eac011a77ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
While it's possible to instantiate safe_delete using a nullptr, the
check in if-statement is 99.9(9) % of time redundant and equal
to if (true && object). Some compilers will issue a compilation
error (if warnings are treated as errors for example).
Change-Id: Ib593dc53deb6d2e4b77ea5c896610dc536c61b7c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android 11's SELinux rules block the RTM_GETLINK requests that
qnetworkinterface_linux.cpp needs to make. So disable this completely
and fall back on the older rimplementation. Bionic has some workarounds
in their getifaddrs() implementation to make this work.
Fixes: QTBUG-86394
Pick-to: 5.15 5.15.1
Change-Id: I87447a0ecdee4dc7b506fffd163180c2b1db7835
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Remove compile warning for -Wdeprecated-declarations.
Change-Id: I747c8a390f26cfc4626e40c4684034c394bbf3c9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
It triggers when connecting to localhost (or when using socks proxy) and
is nothing you can act on most of the time, so change it to qCDebug.
Change-Id: I669fbde4fa0ed194703ea6a4dab13790aa771852
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Makes the QNetworkAccessBackendFactory a real interface to be used in
plugins. Requires exporting some classes but they're not made public
yet.
Removes unused features and functions.
Some things are likely still unused due to being specific for HTTP
but the HTTP network replies don't use this backend system.
Changes QNetworkAccessBackend to use a more traditional
read(char*, qint64) function for the "downloaded" data.
And an optional readPointer if supported. So far no backends have it
so it's somewhat useless, but it may be useful going forward.
If not it shall be deleted
Converts all current backends to the new setup
Easy enough, also gets rid of some unused functions.
Task-number: QTBUG-80340
Change-Id: I9339e6c6eb394c471c921f5cafd3af6175936399
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While we initially wanted to just disable the functionality the way it
is currently built forces people to do a full build of Qt just to enable
it. Instead of doing this half-measure let's just remove the code
completely from QtBase and rather prepare QtNetwork to handle being a
plugin that can be compiled at any time.
Task-number: QTBUG-80340
Change-Id: I19155c8c167cf932088f01b2a9706d0e7ab792d1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
And put a note about it in the documentation
Change-Id: I29126e4a80f83c256190e03b8fe01f3c869fd46d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And not the ssl configuration we have on the reply since it's missing
e.g. the newly received session ticket.
Change-Id: Idfeb09012a847605a76d1fe4fb881c663d019b4a
Reviewed-by: Peter Hartmann <peter@edelhirsch.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
and not just the active one(s). When starting the connection with
HTTP/2 and calling QNetworkReply::ignoreSslErrors() it would previously
only ignore the errors in the single active channel that was used, but
if we then fall back to HTTP/1.1 then we'll use the 5 other channels as
well, and those would then fail due to the ignored ssl errors.
Change-Id: I7aeb5b59897dd3a53579f0d38bd255bc2d97c2bb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And don't use int based type mapping anymore.
Change-Id: I456e76d1933ef646a7bd39ce565886b89e938a44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It works as follows:
- user calls write(const QByteArray &);
- this function keeps a pointer to the chunk and calls a regular
write(data, len);
- write(data, len) calls a virtual writeData();
- subclass calls a new QIODevicePrivate::write();
- QIODevicePrivate::write() makes a shallow copy of
the byte array.
Proposed solution is fully compatible with existing subclasses.
By replacing a call to d->writeBuffer.append() with d->write(),
subclasses can improve their performance.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: I24713386cc74a9f37e5223c617e4b1ba97f968dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Remove obsolete functions and enumeration values
- Remove QObject * parameter from QMetaProperty accessors
- Fix renamed enumerations in QSsl
- Fix list items to be \li
- Fix function signatures and variable names
Change-Id: I37c7e6bf2c8ff92bc7b82620bae0a27796f866ab
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QAbstractSocket::abort() is not a virtual function and
QSslSocket::abort() does not override it. Having two alternatives
requires a dynamic typecasting and violates the principles of object-
oriented programming.
Due to the BC, we were unable to fix that in Qt5. Now, we can modify
QSslSocket::close() to handle QAbstractSocket::abort() requests and
remove the duplicate.
Change-Id: I49d6f32a571ae6e35b08cb366816f917e580dae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
1. Remove a useless forward declaration of a non-existing class.
2. Simplify the cipher filtering.
3. A missing private key (when local cert is present) found
by the Qt, not OpenSSL, so no need in asking OpenSSL for errors
in queue.
3. Fix a potential double-free (for opaque keys).
4. read/write BIOs normally owned by SSL object, but if
we fail to allocate any of them, we return early,
potentially failing to free the one that was allocated.
Change-Id: Ifb52fbc9fd1a38f101bd7ff02e79b82d6eb7e5b0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After calling this function, the user expects that the connection is
terminated, I/O device is closed and the socket is ready for a new
attempt. But, if the socket was disconnected before the call, close()
is not called and I/O device remains opened.
Because QAbstractSocket::close() and QIODevice::close() can handle
reentering, we can call close() unconditionally, which makes
the behavior obvious.
Change-Id: I90a9cbb1a1fe8f866b55ef0bd68d286b34e853f5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtNetwork requires the socket library as a public dependency. Similar
to Windows's ws2_32 library.
Task-number: QTBUG-83202
Change-Id: I92bb48fddc2cbea07700cde65b4737500b9820f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now that I need this stuff both in OpenSSL and woldSSL code, makes sense
to introduce such helpers as a separate change (instead of duplicating
the code in wolfSSL patch).
Change-Id: I9ce600ebe709d103209372ea4c2bdb6fa6b6ce3a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
One warning about unused variable (dataLeftover), which was at some
point replaced by the class variable 'decoderHasData'.
The second warning was a fault of logic: checking that the unsigned
value retValue was greater than or equal to zero. Which only came about
because they initially did different things but the branches got merged
and the logic became flawed.
Change-Id: Ia3a04516c1b7b5f962226998bf3f4d101dd38148
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We extend configurejson2cmake to read the "commandline"
information from configure.json. This data is then translated to CMake function
calls and written it into commandline.cmake files.
We extend QtProcessConfigureArgs.cmake to pick up those commandline.cmake
files to feed our command line handling code, which is a
re-implementation of the command line handling in qt_configure.prf.
The command line handler sets INPUT_xxx variables, similar to
configure/qmake's config.input.xxx variables. The INPUT_xxx values are
translated
- to -DFEATURE_xxx=ON/OFF arguments if the input represents a feature,
- to corresponding CMake variables if such a variable is known,
- or to -DINPUT_xxx=yyy CMake arguments.
Configure arguments that have an entry in
cmake/configure-cmake-mapping.md are actually implemented. Other
arguments are likely to need more work.
Task-number: QTBUG-85373
Change-Id: Ia96baa673fc1fb88e73ba05a1afb473aa074b37d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move the QIODevice::OpenMode enum into a base class, so that
we can remove the full QIODevice (and thus QObject) dependency
from qdatastream.h and qtextstream.h.
This is required so that we can include QDataStream in qmetatype.h
without getting circular dependencies.
As a nice side effect, QDataStream and QTextStream can now inherit
QIODeviceBase and provide the OpenMode enum directly in their
class scope.
Change-Id: Ifa68b7b1d8d95687ed032f6c9206f92e63bfacdf
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Also take this opportunity to reshuffle the content-encodings in the
intended ordering since the ordering is used to signify priority.
Task-number: QTBUG-83269
Change-Id: I022eecf1ba03b54dbd9c98a9d63d05fb05fd2124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not following redirects is not a feature, but just a hastle for everyone.
The main issue with switching this default is that applications that
actually do manual redirect handling will break in various ways.
FollowRedirectsAttribute was removed as it no longer serves any
purpose beyond duplicating the default value.
[ChangeLog][Network] QNetworkAccessManager now follows redirects by
default with the NoLessSafeRedirectPolicy.
[ChangeLog][Potentially Source-Incompatible Changes]
QNetworkRequest::FollowRedirectsAttribute was removed and has been
superseded by QNetworkRequest::RedirectsPolicyAttribute
Fixes: QTBUG-85901
Change-Id: Ic5b776180a4b84ac4fc895158bb5a66a3c91a042
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we ask for HTTP/2 or 1.1 and the server doesn't list either then we
should still try to connect using HTTP/1(.1) just in case, to keep
compatibility.
Task-number: QTBUG-85902
Change-Id: I6ff2e38ac9d767e482a19ee4c81d101be37d3fab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This seems to only be happening when we have a single channel because
otherwise it will try IPv4 in one channel and IPv6 in the second.
Change-Id: I0d513e25fefffeabfc733e895827aa12da335ef9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The user-agent should be propagated to the proxy as well or else we
get our default one.
Change-Id: Id2283a8f2ade1a32f7fcf3d691be8d380d334b50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In some cases (i.e. with SOCKS) we don't have a HTTP/2 request ready
yet so it would just error out.
Change-Id: I6449de5fb52f5208d5641062c5906c3baff18b77
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In that case we haven't created the h2 handler yet, so it will
crash when trying to access various members.
Task-number: QTBUG-85902
Change-Id: Id0699ff06ef67748a16622703f731db0b0867771
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Before the introduction of QDecompressHelper gzip was preferred over
deflate. The change seems to be accidental. Amends commit
7b76379a89.
Change-Id: I70f33d551912465d63f49ea3db1ac3575d19a92d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QIODevice::skip() called a virtual QIODevicePrivate::skip() to
implement an efficient skipping on I/O devices for the internal
subclasses. The user subclasses cannot inherit QIODevicePrivate, so
this functionality was not externally accessible.
This patch replaces QIODevicePrivate::skip() with a virtual protected
QIODevice::skipData(). While the basic implementation simply discards
the data by reading into a dummy buffer, users can reimplement this
function to improve the performance in their subclasses.
[ChangeLog][QtCore][QIODevice] Added virtual protected skipData().
Now, subclasses can implement device-specific skipping of data.
Change-Id: I9522f7f7ab9d03ac06e972a525f8ec2fa909a617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Currently it is possible to compare a QSslError with a
QSslError::SslError because QSslError has an implicit
constructor. But the comparison often fails because
a QSslError received from the system contains a
certificate.
[ChangeLog][QtNetwork][QSslError] The constructor
QSslError(QSslError::SslError error) is now explicit.
Change-Id: I36cc5895245d3b43ab4b8d65a9635893d6b0e6a4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Changes are not too big for now. Just replaces use of the previous
calls to the zlib decompression function. And initialize
QDecompressHelper when we know the content-encoding.
Task-number: QTBUG-83269
Change-Id: I41358feaef2e7ac5f48f14e3f95ec094e0c110b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Some servers have an upper limit on how many times a nonce can be
reused. Because the nc was not being reset the server would get a
high nc and would close the connection.
Change-Id: I71d5a316f79777a45c7323d93e28b3845aefcfad
Original-patch-by: Benjamin Reikowski
Pick-to: 5.15
Fixes: QTBUG-85729
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To support streaming decompression in QNAM.
Will also be used to refactor existing decompression code in QNAM.
Task-number: QTBUG-83269
Change-Id: Iecf3e359734163f15686c949f75d41fa4794a00e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have several classes inheriting QObject (directly or not) and disabling
copy (thus non-movable implicitly). Let's make them non-movable explicitly
now.
Change-Id: I509a066e9977480b30842afef26319b8afec6001
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This amends 0ef46b41d8 to ensure the
new configuration is styled correctly for qmake.
Task-number: QTBUG-80938
Change-Id: Iebfff3ff0570d2e92d01d4eb1178c0d6261468f9
Pick-to: 5.15
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
WebAssembly does not need the http feature, but these functions were
hidden behind that feature.
Fixes: QTBUG-83867
Pick-to: 5.15
Change-Id: I7cd9aa73003f45ccbc2613c67c21e4067d6edddd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The CA fetcher on Windows works on a separate thread, it can take
quite some time to finish its job and if a connection was meanwhile
closed (via 'abort', 'close' or 'disconnectFromHost') but the socket
is still alive/re-used - we don't want to be fooled by the previous
fetch 'finished' signal, only if it's fetching for the same certificate.
Change-Id: Ibd0a70000ad10cff10207d37d7b47c38e615d0f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also, remove the deprecated function and its auto-test.
Change-Id: If04a54c4b91e0f76523960c7b1a5bcb8fe883ac6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a first call to ::WSASend() consumes less data than requested, we
are trying to make a second call, leaving 'bytesToSend' unmodified.
Instead of setting a new value for 'bytesToSend', it seems reasonable
to break the loop, if the system buffer overflow detected.
Pick-to: 5.15
Change-Id: I8038e95c20221518955efe786f2d0dadb98360fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractSocket::flush stopped being virtual and, instead, QAbstractSocketPrivate::flush
is now virtual. So the code in QSslSocket is essentially a duplicate.
Change-Id: Iebb33c8490268270b90a662ab64b1ae47c4cbac7
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If QSslConfiguration::setCaCertificates is set to empty list openssl
cannot verify the OCSP-Response.
Qt will provide it as QSslError::OcspResponseCannotBeTrusted that can be
ignored. But the openssl error is still in the error queue and prevents
a successful reply in QNetworkReply::finished.
So let's clear the queue after OCSP checking to avoid side affects.
Change-Id: I44a7f45a2eebd20ea86a235a0534f80986c40a26
Fixes: QTBUG-85638
Pick-to: 5.15
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
OpenSSL 1.1.1 has a convenient function for parsing ASN.1 times;
use that instead of the hand-rolled code.
Change-Id: Ic0aecc915f362c02b220819305f3f3c347a75297
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Certain resources and compiled jar files have to be copied into the
non-prefix build dir location. They were previously only installed,
which doesn't do anything in a non-prefix build.
Change pro2cmake to generate code that places the compiled java
jars into QT_BUILD_DIR, so that non-prefix builds work.
Place the module dependencies xml files into lib folder in non-prefix
builds.
Don't special case the output and install location of the Android QPA
plugin.
Task-number: QTBUG-85399
Change-Id: I4ac9d3929ea8ecc95ec99a77e621ad2121b68832
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CFURLStringByAddingXXX was deprecated, so we use QUrl combined
with existing QString-based converters (from/to CFStringRef).
Pick-to: 5.15
Task-number: QTBUG-83992
Change-Id: I6f1a3fdafa9532bb7816a1262169df3421169cb7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also add a ; where it is missing.
Task-number: QTBUG-82978
Change-Id: Ic5d2a07363c25ab641d234baca89bc62238458cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
No client of QDateTimeParser actually uses it unless datestring was
enabled, nor is it any use without datestring. Various methods
conditioned on datestring are broken unless datetimeparser is enabled.
We can't condition public API on datetimeparser, as it's a private
feature, but client code can condition use of it on the private
feature. All string-to-date/time conversions that use a string format
(this includes all locale-specific formats) depend on feature
datetimeparser.
Change #if-ery (or add it) in all client (including test) code to test
the right feature.
Tidied up some code in the process. Killed some already-redundant
textdate #if-ery. Renamed a test whose name claimed it involved
locale, which it doesn't, in the course of #if-ing it.
This simplifies the condition for feature datetimeedit (which overtly
depended on textdate, redundantly since it depends on datestring which
depends on textdate; its dependence on datetimeparser now makes its
dependency on datestring also redundant).
It also removes the need for assorted datestring checks in
QDateTimeParser itself.
Change-Id: I5dfe3a977042134b2cfb16cbcc795070634e7adf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We had such an overloaded version in QSslSocket, it was deprecated without
providing any alternative. Now this function has some use and may be
introduced in Qt6, as QSslConfiguration::setCiphers(const QString &).
Last but not the least - a useless and strange auto-test was removed
(it was creating a list of 5 QSslCiphers each with isNull() == true).
That's becasue '!MD5' or 'ALL' (for example) is not a cipher to be found
in supportedCiphers.
Change-Id: I47eb4c0faa9b52885e883751dd992cd9cb3d26fe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not to pollute the global namespace with rather generic names
(especially in case QT_NAMESPACE is none); also drop the
(now)redundant 'Q' prefix in the names.
Change-Id: I57ea7e3996cced705f7ddbdbc1e0231191b31c43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Closing it early means the user may get this message when reading data
without checking for error:
'QIODevice::read (QNetworkReplyWasmImpl): device not open'
Change-Id: I377fc3da68e9d9f14f8504ace5addbb4f8e3c539
Fixes: QTBUG-85176
Pick-to: 5.15
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remove quote character, fixing:
Performing C++ SOURCE FILE Test HAVE_openssl_headers succeeded with the following output:
Run Build Command(s)
src.cxx 8 88: warning: missing terminating ' character
8 | # error OpenSSL was reported as >= 1.1.1 but is missing required features, possibly it's libressl which is unsupported
which makes one think the test failed.
Change-Id: I0ac02deee4282ef7c953186b820a31309e82b5e1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
LibResolv uses a QLibrary which is a QObject that must be deleted
if the QCoreApplication is being destroyed to release the underlying library.
A Q_GLOBAL_STATIC won't release any memory and is not able to
manually release it.
Pick-to: 5.15
Task-number: QTBUG-84234
Change-Id: I97fe5faca309e9c1e85435f602ad7f8c3f633b48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHostInfoLookupManager has a QThreadPool as member.
QThreadPool is a QObject and must be deleted if the QCoreApplication
is being destroyed to release the underlying ThreadData.
A Q_GLOBAL_STATIC won't release any memory is not able to
manually release it.
Pick-to: 5.15
Task-number: QTBUG-84234
Change-Id: I96be4601c3af38fa7c753a6f7acb8273ee277a27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Requires moving construction and destruction of the IConnectionPoint
(contained in QNetworkListManagerEvents contained in
QNetworkStatusMonitorPrivate) and the calls to CoInitialize and
CoUninitialize to start()/stop() so it can be taken down
and brought up in a reasonable way.
Partial squashed cherry pick of bde6b27882143acbafa8c0b2e8055c3808ae3dd4
and the following fixup patch 84be436ef0f8253af87cdd2742858107e54c228b.
Task-number: QTBUG-84031
Change-Id: I9d644261c6c730ea511e28d75da91bd34504bd03
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit bde6b27882143acbafa8c0b2e8055c3808ae3dd4)
(cherry picked from commit 84be436ef0f8253af87cdd2742858107e54c228b)
They were deprecated with replacements in QSslConfiguration proposed (and
some without alternative, which we'll provide if there is any demand
in such an API). Special thanks to M.N. for a nice hint on how to
amend the test without introducing a new API.
Change-Id: I7841a5b3f30469d8204b61cb65921c34275e0650
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And name the main class QList. That's also the one we document.
This gives less porting pain for our users, and a lot less churn
in our API, as we use QList in Qt 5 in 95% of our API.
In addition, it gives more consistent naming with QStringList and
QByteArrayList and disambiguates QList vs QVector(2|3|4)D.
Fixes: QTBUG-84468
Change-Id: I3cba9d1d3179969d8bf9320b31be2230d021d1a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The addition of CMakeLists.txt in other directories made the reference
ambiguous. Also fix the Qt version.
Change-Id: I679d86a302ae6c41b84ded66e3f21c5320e4b325
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
I removed the line locally, and then added it back for testing and
forgot to remove it again.
Amends a0bfa4e1f8.
Task-number: QTBUG-84907
Change-Id: I7d6d0237742f4c3fc3ca0a2532d776325f396aab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The connectivity pre-check has been around for a long time, and it has
caused various issues in that time. Certain scenarios, like using
certain VPN configurations, might confuse the OS into thinking you don't
have and network connectivity at all and abort the connection.
Especially noticeable/frustrating when the connection was going to a
host inside the local network.
The negative impact of this change would at worst be that we might try
to connect and it will wait some amount of time before the OS tells us
the connection failed in situations where it would previously have been
aborted before it started. But the false-negatives are not really an OK
sacrifice in that case.
Fixes: QTBUG-84907
Change-Id: I37fc69051e39df3c1a1fecb56ef54521a4d3d0c3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
CL = Content-Length
The uploadByteDevice was kept after a redirect which caused the
internals to assume that we had to upload the data. Even if this was
not the case we still transmitted the Content-Length header from the
first request which was now stored in two places.
Fixes: QTBUG-84162
Pick-to: 5.15
Change-Id: Ic86b1ef0766ffcc50beeed96c1c915b721d40209
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It was removed but some documentation bits were still there, apologies
Change-Id: I1888b34fe04e6566349d35a27391d0bd14d622d4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Emscripten does not like when the post data gets deleted in the local
scope.
Fixes: QTBUG-84685
Pick-to: 5.15
Change-Id: I17f9d5cc3253c26b42253daa68e2fbaccc48eaf6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Make QPair an alias for std::pair, and qMakePair just a forwarder
towards std::make_pair.
Why? Fundamentally to ditch a bunch of NIH code; gain for free
structured bindings, std::tuple and std::reference_wrapper
compatibility, and so on.
Breakages:
* Some that code manually forward declares QPair.
We don't care about it (<QContainerFwd> is the proper way).
* Some code that overloads on std::pair and QPair. Luckily
it's mostly centralized: debug, metatypes, testing macros.
Just remove the QPair overload.
* Usages of qMakePair forcing the template type parameters.
There are a handful of these in qtbase, but only one was actually
broken.
* std::pair is NOT (and will never likely be) trivially copiable.
This is agreed to be a mistake done by practically all implementations
in C++11, can can't be fixed without breaking ABI.
Some code using QPair assuming it's trivially copiable may break;
exactly one occurrence was in qtbase.
* QMetaType logic extracts the type names in two different ways,
one by looking at the source code string (e.g. extracted by moc)
and one via some ad-hoc reflection in C++. We need to make
"QPair" (as spelled in the source code) be the same as "std::pair"
(gathered via reflection, which will see through the alias)
when compared. The way it's already done e.g. for QList is
by actually replacing the moc-extracted name with the name
of the actual type used in C++; do the same here.
On libc++, std::pair is actually in an inline namespace --
i.e. std::__1::pair; the reflection will extract and store
"std::__1::pair" so we need an ad-hoc fix to QMetaType.
[ChangeLog][QtCore][QPair] QPair is now an alias to std::pair,
and does not exist as a class in Qt any more. This may break
code such as functions overloaded for both QPair and std::pair.
Usually, the overload taking a QPair can be safely discarded,
leaving only the one taking a std::pair. QPair API has not changed,
and qMakePair is still available for compatibility (although
new code is encouraged to use std::pair and std::make_pair
directly instead).
Change-Id: I7725c751bf23946cde577b1406e86a336c0a3dcf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Apart from a more fitting, minimal, API, QDuplicateTracker also
transparently uses C++17 pmr::monotonic_buffer_resource to avoid, or
at least reduce, memory allocations.
Change-Id: I025504c7d22fb7a8c943e3968e4613d45c08d0b3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Apart from a more fitting, minimal, API, QDuplicateTracker also
transparently uses C++17 pmr::monotonic_buffer_resource to avoid, or
at least reduce, memory allocations.
The code is the first user of the collected data, so make that
available by adding QDuplicateTracker::appendTo(Container&) methods.
Change-Id: Ibd8810c0070db7e6b3ead6d6a569facdab88b646
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch adds the missing documentation for the new QSslCertificate
PatternSyntax enum which replaces the one from QRegExp.
Fixes: QTBUG-84464
Pick-to: 5.15
Change-Id: Icf092f42ad4dff9207ca51dfd8b4fb8ed6443ff2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use 'errorOccurred' instead of 'error' and 'sslHandshakeErrors'
instead of 'sslErrors'.
Fixes: QTBUG-82605
Change-Id: I19d4845b16c7b636af7b0658d4fbbba4eef9d029
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not quite "next commit" like I wrote originally, but better late than
never.
As the comment said (and the code shows) it only returns true now so
the extra function and if-check isn't needed anymore.
Change-Id: I9e8fb8891a116475ab78c3848d7cfcdb659ac521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The request/reply pair is created out of QNetworkRequest, we set
autoDecompress data-member on the request, but not reply. As a result,
reply in its destructor fails to release memory, allocated by z-lib
(by failing to call inflateEnd). Since with H1 requests it does not
seem to be a problem (no leaks detected), I'm limiting this change
to H2 handler only. Later it will be retired by the stream decompression
change in Qt 6, but will be picked to 5.15.
Fixes: QTBUG-84560
Pick-to: 5.15
Change-Id: I82e19d2b0a83624b730edd20d7d45721e7001731
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This does the analog of 46f407126e for the
methods we care about (signals, slots, Q_INVOKABLEs). In addition to the
actual QMetaType, we store an array with offsets so that we later can do
a mapping from methodIndex to metatype.
The newly added QMetaMethod::{return,parameter}MetaType methods can then
be used to retrieve the metatypes.
This does however require that all involved types are complete. This is
unfortunately not a feasible requirement. Thus, we only populate the
metatype array on a best effort basis. For any incomplete type, we store
QMetaType::Unknown. Then, when accessing the metatype, we fall back to
the old string based code base if it's Unknown.
Squashes "moc: support incomplete types" and "Fix compile failures
after QMetaMethod change"
Fixes: QTBUG-82932
Change-Id: I6b7a587cc364b7cad0c158d6de54e8a204289ad4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is now possible because of the earlier commit that changed the
const arrays in qurltlds_p.h to constexpr arrays.
Change-Id: I37a6a64e250bbe33f7d34b5916595bf6a37aed4a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In case a certificate chain is missing an intermediate,
for a certificate having "Authority Information Access"
extension it's possible to fetch this intermediate and
build the chain up to the trusted root. Unfortunately,
it's not always possible to install the root certificate
in the system "ROOT" store and then an application
wants to set it in the socket's configuration,
using setCaCertificates(). But this call also
disables CA fetcher ('no on demand root loading').
It makes sense to relax this logic for such
certificates and try to fetch the intermediate CA
and then have the complete chain verified.
Pick-to: 5.15
Fixes: QTBUG-84173
Change-Id: I5b9b4271767eba6f5fd2b5cf05e942360c6aa245
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Coverity warned that chunk could be >= tldChunkCount (2), and
tldData[chunk] (array of length 2) would be accessed out of bounds.
This can not happen, but it was unclear.
Clarify logic with comments and asserts, that Coverity will hopefully
understand now.
Change-Id: I2a38c685cfcbc69ed123918e8cbed360b20b1035
Coverity-Id: 178254
Pick-to: 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
With the recent changes in the utility that generates it, it now has
improved readability and constexpr arrays, usable in static asserts.
It also has an updated list of TLDs.
Change-Id: Ibdc986d667feebeb141ff81f6fddbc05b6be8488
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Causes emission to not happen and prints a warning
Pick-to: 5.15
Change-Id: Ie80cc89549741079c243e6fd4269f793bccca9fd
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
mValue is a QByteArray, so no need to expand data to UTF16 just to
compare it to a Latin1 character.
Change-Id: Ib3c8770867cd5509bb4c2ac5e45aabca577b3bba
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of manual string splitting (EW!), use QDateTime parsing.
Moreover, X.509 certificates *must* have a valid start/end date.
In case of parsing failure, reject the certificate. An autotest
for this last case is coming in a separate patch.
Change-Id: I934bf9e6a4a92e4befdb3b0f9450f76f67bad067
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we already know the certificate, there is no need in adding it again.
This function is deprecated, but will stay forever in 5.15.
Pick-to: 5.15
Change-Id: I760f5bcffea78ac02c5643ee1112725edd32f15a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
DSA/DH/etc _bits functions were first deprecated, then un-deprecated,
so we don't worry about them for now. SSL_CTX_load_verify_location was deprecated
and two new functions were introduced instead (one using file, the second
- path). It's unfortunately 3.0 only, so we have to check OpenSSL version.
DH_check is deprecated and we have to use EVP_PKEY_param_check with
tons of a boilerplate code around.
Fixes: QTBUG-83733
Pick-to: 5.15
Change-Id: Icd401ab6aad30c23c37443c7bc82c702fb843640
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is Qt 6, so Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT6 is the same as
Q_DECLARE_SHARED.
Let's hope we'll collectively get better at detecting missing
Q_DECLARE_SHARED so we won't need a
Q_DECLARE_SHARED_NOT_MOVABLE_UNTIL_QT7 in the future.
Change-Id: I3da9faff4c66b64a3b257309012a2a10a6c6d027
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The addition of Negotiate to QAuthenticator caused a soft sort of
regression in environments where there is key distribution center
set up. This was due to how QAuthenticator works in that it will
simply prefer the latest entry in the enum, which now was Negotiate,
which sadly wasn't really a valid option in that situation. And it is
not smart enough to fall back and try another method.
To work around this issue we re-order the enum to prioritize
authentication methods to restore previous behavior.
Note that Negotiate is still preferred over Basic and None because
they're not likely to appear together.
Pick-to: 5.15
Task-number: QTBUG-83905
Change-Id: Ic528318b6b711aa04d42a86c684452bb6ebde112
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
migrating backend was done if the QNetworkSession changed. With
QNetworkSession gone this was no longer called from anywhere.
Change-Id: I8c995001f9d4c7ae83446b4d29fa62c954c79889
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As it was found recently CA fetcher, while building a chain with a missing
intermediary, may return the root we are already aware of (had in the "ROOT"
store). While this is in general harmless, it can be a bit surprising if
some code is analyzing the list of CA certificates after a handshake.
Pick-to: 5.15
Change-Id: I1df3b537e2a812de17e2c94ad4643cf36e7e946f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We end up with an absurd situation:
QSslConfiguration conf;
//we set CA certs so that on demand loading is disabled:
conf.setCaCertificates({...});
QSslSocket s;
s.setSslConfiguration(conf);
Q_ASSERT(conf == s.sslConfiguration); // this assert fails.
Pick-to: 5.15
Change-Id: I272bed145434082acc6ead95fe3640d222b21131
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QNetworkConnectionMonitor::start was previously called after checking
d->networkAccessible, unfortunately that means if the network was
unavailable when QNetworkConnectionMonitor was created we don't
subscribe to updates or recheck the status (unless
QNetworkAccessManager::networkAccessible() is called).
Move the call to start to before the offline check. Also update the
Windows backend so that it updates networkAccessible on the call to
start()
Pick-to: 5.15
Change-Id: I37647f19f703947143e7cbdafe09619ce0d98cc1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QNetworkAccessCacheBackend didn't override the virtual start() function
which then deferred to QNetworkAccessBackend::start() which conditions
its success on whether or not a network session is available.
Override the function and reimplement it without the network session
check.
Fixes: QTBUG-83205
Change-Id: I45d98a6f5da8ad04bb9da551a131f109e83074d7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Instead of manipulating a QByteArray, do it with a QLatin1String,
which is free. Also, don't prepend a dot to force matches at label
boundaries, check that there's a dot where the match occurred. Saves
two allocations per iteration. Finally, pull the query's
peerHostName() initialization out of the loop - it doesn't depend on
the loop variable.
Change-Id: I6dfdae711f0bd8941af69bfbcfda7873a40e4b80
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They were masked by all QChar ctors being made explicit, except the char16_t one,
which was left as the only viable choice.
Change-Id: I7288e6ae32b2771859a61c0b99783209d47616bc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It seems it was defaulting to the indexdb filesystem, but it is not mounted.
Fixes: QTBUG-83827
Change-Id: I1f81d790e5786fe41b59c0f41ca7f6025732c9b2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
With the introduction of the \typealias command to QDoc, QDoc generates
a standardized line for aliased types.
This patch removes duplication caused by the change in QDoc.
Change-Id: I1a01c378f85b0decb7c0400a3b21146f0898c6ec
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
For compatibility with the bearer functionality.
Change-Id: I26ba6bad046b3f99c8ee13e709a26ddcbd868e25
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Do not continue if the conversion to 32bit int would cause an overflow.
Change-Id: I8a198dce5962e7ebd248b9baa92aba8730bfd3b0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The last (and only) user was removed in 4f076db3d2.
Change-Id: I59b155017bfd00bbcbfe72dc0e535c92c0384dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also add a piece of documentation that the input needs to be
in lower-case (the implementation uses qt_hash to index into
a table of TLDs, and qt_hash is case-sensitive).
Change-Id: I911c0e2bb0826fc1b0fc01ed60bdfd6e4c0298f2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit 3a6d8df521.
That change is only for 5.14.
Conflicts:
src/plugins/platforms/wasm/qwasmeventtranslator.cpp
src/plugins/platforms/wasm/qwasmintegration.cpp
src/plugins/platforms/wasm/qwasmopenglcontext.cpp
src/plugins/platforms/wasm/qwasmscreen.cpp
Change-Id: I2d845c795a683e1542201cfb6fdd185fec2b17ab
This reverts commit 3a6d8df521.
That change is only for 5.14.
Conflicts:
src/plugins/platforms/wasm/qwasmeventtranslator.cpp
src/plugins/platforms/wasm/qwasmintegration.cpp
src/plugins/platforms/wasm/qwasmopenglcontext.cpp
src/plugins/platforms/wasm/qwasmscreen.cpp
Change-Id: Ib9151e199291fe6eb4151027b515393c05303d65
Both Negotiate and NTLM are conditioned on the 'challenge' being empty
when starting the authentication process. So let's reset it when we
start the authentication process.
Fixes: QTBUG-83370
Change-Id: I41af6d5bcfe3dd980ca2bedce10ceff4f61047ff
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The pre-existing overload passes an int, but this can mean the
descriptor gets truncated in compilations where the descriptor
is 64-bit.
The old overload with int is visible when querying the metaobject system
so string-based connects still work as before, and connecting to it will
produce a deprecation warning in the output.
At the same time the PMF-based connect will, on recompile, pick the
QSocketDescriptor overload. As an added improvement it also comes with
the notification type, removing the need for separate slots where the
code would be mostly shared anyway.
The QSocketDescriptor type can be implicitly converted to and from
qintptr to ensure existing code still compiles. It can also be
constructed from Qt::HANDLE on Windows.
In this same patch I also update the existing string-based connects in
this module, which then includes updating the parameters for some slots
as well.
[ChangeLog][QtCore][QSocketNotifier] Added
QSocketNotifier::activated(QSocketDescriptor, QSocketNotifier::Type).
This replaces the activated(int) signal which in 64-bit environments
could truncate the socket descriptor. If you use "activated" with the
string-based connect() then you need to update the parameter type of the
signal and slot if it had one. If you use it with the pointer to member
function based connect() then all you need to do is update your slot's
parameter type if it has one. If you need to compile your source code
with multiple versions of Qt then connect() to this function using
pointer to member function and update the slot's parameter type if
needed.
Task-number: QTBUG-70441
Change-Id: Ic43d6bc4c5bcb4040867b2ffad8d36fb01eed8af
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not call SSL_shutdown on a session that is in handshake state (SSL_in_init(s)
returns 1). Also, do not call SSL_shutdown if a session encountered a fatal
error (SSL_ERROR_SYSCALL or SSL_ERROR_SSL was found before). If SSL_shutdown
was unsuccessful (returned code != 1), we have to clear the error(s) it queued.
Unfortunately, SSL_in_init was a macro in OpenSSL 1.0.x. We have to
resolve SSL_state to implement SSL_in_init.
Fixes: QTBUG-83450
Change-Id: I6326119f4e79605429263045ac20605c30dccca3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit 8907635da5)
The windows and macOS implementations where still using QRegExp
in one place.
Change-Id: Iaf6c6ead10f7f061ff0edce889abe18751b9d308
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Do not call SSL_shutdown on a session that is in handshake state (SSL_in_init(s)
returns 1). Also, do not call SSL_shutdown if a session encountered a fatal
error (SSL_ERROR_SYSCALL or SSL_ERROR_SSL was found before). If SSL_shutdown
was unsuccessful (returned code != 1), we have to clear the error(s) it queued.
Fixes: QTBUG-83450
Change-Id: I6326119f4e79605429263045ac20605c30dccca3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is required, so that QHash and QSet can hold more
than 2^32 items on 64 bit platforms.
The actual hashing functions for strings are still 32bit, this will
be changed in a follow-up commit.
Change-Id: I4372125252486075ff3a0b45ecfa818359fe103b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In Coin when provisioning for Android, we download and configure
the OpenSSL package, but don't actually build it. This means that
find_package(OpenSSL) can find the headers, but not the library,
and thus the package is marked as not found.
Previously the openssl_headers feature used the result of finding
the OpenSSL package, which led to it being disabled in the above
described Android case.
Introduce 2 new find scripts FindWrapOpenSSL and
FindWrapOpenSSLHeaders. FindWrapOpenSSLHeaders wraps FindOpenSSL,
and checks if the headers were found, regardless of the OpenSSL_FOUND
value, which can be used for implementing the openssl_headers feature.
FindWrapOpenSSL uses FindWrapOpenSSLHeaders, and simply wraps the
OpenSSL target if available.
The find scripts also have to set CMAKE_FIND_ROOT_PATH for Android.
Otherwise when someone passes in an OPENSSL_ROOT_DIR, its value will
always be prepended to the Android sysroot, causing the package not
to be found.
Adjust the mapping in helper.py to use the targets created by these
find scripts. This also replaces the openssl/nolink target.
Adjust the projects and tests to use the new target names.
Adjust the compile tests for dtls and oscp to use the
WrapOpenSSLHeaders target, so that the features can be enabled even
if the library is dlopen-ed (like on Android).
Task-number: QTBUG-83371
Change-Id: I738600e5aafef47a57e1db070be40116ca8ab995
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
It's required as a response to upgraded protocol and apparently some
servers would wait for it, not sending any frames. Becomes a problem
in case only one request was sent.
Fixes: QTBUG-83312
Change-Id: I90dc5c04095f0b78baa404466625d329dc4c6e21
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Changed this to not use capturedTexts(), as it
is slower than required, and behaves slightly
differently than in QRegExp (the returned list
might be shorter than the amount of captures if the
last capture didn't match).
Change-Id: I3f90128af62d784a3d1beb993ab215e0c7d6b826
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This has better support for threaded use, and gets rid of bind use.
This requires emscripten 1.38.37 and above
Task-number: QTBUG-76891
Change-Id: Ic30a6820c2ce945c314751c06cfc356914a71217
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Oh, and re-remove the spdy protocol handler.
Change-Id: I9ca3517b14ac202eac19ae75d481cfd78d431abb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We don't support 1.0 any more, and 1.1.0 has reached EOL.
Bump to 1.1.1 so we can freely use its APIs.
[ChangeLog][QtNetwork][SSL] The minimum required version
of OpenSSL is now 1.1.1.
Change-Id: I5cfb6672fadfa48aedaefbcd6a954aa9eb85bfa5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
No sanitizer is needed, just looking at the code is enough.
It was wrong.
Change-Id: I9df417c137d6b3361c3161865e099a8be40860de
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move the default arguments to the overload that is not deprecated. This
is fully source and binary compatible.
Change-Id: I0d2eb491faf8c2164b80c33c4c4f749173b690f5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The data structure relies on stable nodes in QHash, something that
is not guaranteed in Qt 6 anymore.
Change-Id: I9077ed404ee922893099f5eaae76d2dcea414090
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There're some uses we can't get rid of until the deprecated functions
are deleted, so suppress them for now.
Change-Id: I85b737eefc71f8f3ac939dfa961383220a8244af
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We can't get rid of internal use, so let's work around that by not
marking it deprecated in private code.
Change-Id: If6cbfff4f16c30892335633567326141fbc44092
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Following the incomplete data guesstimation optimization the
tst_QSslSocket::readBufferMaxSize test would fail due to it waiting for
16K, but the readBufferMaxSize was 10 bytes.
Amends 559b563d71
Change-Id: I5d17fac24e73c1305161aff744710b4c5b0b457a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
For QNAM:
Deprecate the to-be-unused enum and mark the property deprecated in docs
For bearermanagement:
Add a warning on the bearermanagement documentation page that it is
deprecated.
Change-Id: I2cbe12ddec444d9f704601f07f3a7c9b70dc4f3c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add documentation on how to use a module from CMake, alongside
the existing documentation about qmake.
While at it, also remove the mentioning of the central include;
It is not something we should actively advocate anymore. Instead,
the documentation of every class gives the correct include to use.
Task-number: QTBUG-73058
Change-Id: I71ed5a62f4f0a6d868dd1f84ea39e5ac385a2fb8
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Now that we can generate the library config tests which verify the
OpenSSL version, we no longer need these special cases.
Change-Id: I8ddccf4ae1c698db9fac391976b3b4b670712582
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The WARNING_PUSH/POP in QNetworkProxy is needed because it triggers
a warning when compiled which means a warning gets printed under
compilation which means tst_bic fails.
[ChangeLog][Deprecation Notice][QtNetwork] QNetworkConfigurationManager,
QNetworkConfiguration and QNetworkSession are deprecated, to be removed
in Qt 6.
Change-Id: Ife87722045ea10adf667388a1bf94c4f9bc8d5f0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Mårten Nordheim
Joerg Bornemann
Friedemann Kleint
Timur Pocheptsov
Thiago Macieira
Wang Wei
Lorn Potter
Topi Reinio
Marcel Krems
Maurice Kalinowski
Lars Knoll
Alex Trotsenko
Cristian Adam
Allan Sandfeld Jensen
Frederik Gladhorn
Ulf Hermann
Lars Schmertmann
Andy Shaw
Alexandru Croitor
André Klitzing
Giuseppe D'Angelo
Tor Arne Vestbø
Edward Welbourne
Nico Vertriest
Jarek Kobus
Mike Achtelik
Kai Koehne
Mårten Nordheim
Marc Mutz
Samuel Gaist
Oliver Wolff
Fabian Kosmale
Dimitrios Apostolou
Volker Hilsheimer
Alexander Volkov
Qt Forward Merge Bot
Liang Qi
Paul Wicking
Tor Arne Vestbø
Mitch Curtis
Simon Hausmann
Leander Beernaert