Make sure we can handle qsizetype as an integer when appending
test data. This is required for backwards compatibility with Qt 5,
so people don't have to rewrite all their test cases.
QCOMPARE can handle mixed types, tthe only method that requires manual
changes now is QTEST(list.size(), "testrow_expecting_int").
Change-Id: I40723b239e0160cefc05745aa35a75de8599ac08
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This change is motivated by the comment from bc087db59:
Qt 6: remove everything except QSpontaneKeyEvent::setSpontaneous()
Task-number: QTBUG-82978
Change-Id: I5f46ca366c193c06235f88022ec22c6848fbb7b0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also add a ; where it is missing.
Task-number: QTBUG-82978
Change-Id: Ic5d2a07363c25ab641d234baca89bc62238458cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Certain tests fail only on CMake configurations. We need the
capability to ignore these failures, without removing the
qmake-built-Qt coverage for now.
The keyword is enabled when Qt is built with CMake. So it doesn't
matter if the final test is built with CMake or qmake.
Task-number: QTBUG-85364
Change-Id: I157fe3d9254b589ef1e84022c01f4487ff834d27
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make QPair an alias for std::pair, and qMakePair just a forwarder
towards std::make_pair.
Why? Fundamentally to ditch a bunch of NIH code; gain for free
structured bindings, std::tuple and std::reference_wrapper
compatibility, and so on.
Breakages:
* Some that code manually forward declares QPair.
We don't care about it (<QContainerFwd> is the proper way).
* Some code that overloads on std::pair and QPair. Luckily
it's mostly centralized: debug, metatypes, testing macros.
Just remove the QPair overload.
* Usages of qMakePair forcing the template type parameters.
There are a handful of these in qtbase, but only one was actually
broken.
* std::pair is NOT (and will never likely be) trivially copiable.
This is agreed to be a mistake done by practically all implementations
in C++11, can can't be fixed without breaking ABI.
Some code using QPair assuming it's trivially copiable may break;
exactly one occurrence was in qtbase.
* QMetaType logic extracts the type names in two different ways,
one by looking at the source code string (e.g. extracted by moc)
and one via some ad-hoc reflection in C++. We need to make
"QPair" (as spelled in the source code) be the same as "std::pair"
(gathered via reflection, which will see through the alias)
when compared. The way it's already done e.g. for QList is
by actually replacing the moc-extracted name with the name
of the actual type used in C++; do the same here.
On libc++, std::pair is actually in an inline namespace --
i.e. std::__1::pair; the reflection will extract and store
"std::__1::pair" so we need an ad-hoc fix to QMetaType.
[ChangeLog][QtCore][QPair] QPair is now an alias to std::pair,
and does not exist as a class in Qt any more. This may break
code such as functions overloaded for both QPair and std::pair.
Usually, the overload taking a QPair can be safely discarded,
leaving only the one taking a std::pair. QPair API has not changed,
and qMakePair is still available for compatibility (although
new code is encouraged to use std::pair and std::make_pair
directly instead).
Change-Id: I7725c751bf23946cde577b1406e86a336c0a3dcf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove '/' as an example directory. We do not want to retrieve the
directory tree of the entire system.
Change-Id: I1caa7ef659dfe326515a4d81193682dacb373856
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Please use qt_windows.h instead, so we avoid having min/max defined.
Change-Id: Ic1b29666c427bf24556da5494af45ee5953ae827
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Qt 5.4 is not documented anymore since quite some time.
Change-Id: I6811ead502178f7acbed8cf450e42d7fd33ae29b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QTest::toString allocates memory by calling qstrdup; that memory must
be freed by the caller.
Change-Id: I218bc57b3312fdd9195fb49eaed7d20df4bf717c
Fixes: QTBUG-84081
Coverity-Id: 186979
Covierty-Id: 186980
Pick-to: 5.15
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The message to ignore is given in source code, hence UTF-8; it was
being ingested as local 8-bit, which lead to problems when a debug
message wasn't 7-bit clean and the system's native encoding wasn't
UTF-8. Modified QtTest's selftest to check encoding failure.
Pick-to: 5.15
Change-Id: I898744a450115b6d2ee992f1d3b36d8efaeeff7e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The widget snippet was sometimes ignored, because the printsupport
dependency was not explicit in the top-level src.pro file. This lead
to a situation that, if printsupport by chance was already built,
it was tested, otherwise silently ignored.
This shows that having requires(qtHaveModule()) inside src/ is actually
harmful, and they are therefore removed from snippets.pro. Also, the
dependencies for the snippets projects are now moved to a central place
so that the correctness is easier to check.
Pick-to: 5.15
Change-Id: Ice051fa04848040e206c78361fbbcf680383c6b2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
We hope this shall avoid some flaky failures noticed in quick tests,
e.g. tst_QQuickMenu::Material::subMenuPosition(cascading,flip) was
recently seen failing with 3.88e-11 != 0. This required some revision
to test data in the testlib selftest for floats; the resulting
expected output differs in details but not in which tests pass or
fail. QEMU, naturally, made life difficult, requiring special-case
code in the test-driver.
[ChangeLog][QtTestLib][QCOMPARE] QCOMPARE() now treats its values as
equal when qFuzzyIsNull() is true for both of them.
Change-Id: Icc6ad5164b609937eddbe39cc69120f0abf0f3b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Fixes
error C2124: divide or mod by zero
when compiling the test code (enabled by
713cd83200).
Pick-to: 5.15
Change-Id: I2ae39426fc0012f79714ff3d6484d792cab4bd92
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
This amends b3e4be2d8b.
When building testlib with QtGui linked:(use "QT = core-private gui"
in src/testlib/testlib.pro)
Undefined symbols for architecture x86_64:
"QAbstractItemModelTester::verify(bool, char const*, char const*, char const*, int)", referenced from:
QTestPrivate::testDataGuiRoles(QAbstractItemModelTester*) in qabstractitemmodeltester.o
Change-Id: Ideb10ddd6717fed8d9f91f75bbfc9d5a22104730
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This patch adds the equivalent of testlib's selfcover.pri and is enabled
for both testlib and the respective selftests test.
This patch also fixes the selftests so that they can run without
FEATURE_testlib_selfcover enabled.
Change-Id: I15913de2d572ac79804ce3e652cee66de74318f8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The command is deprecated and has no effect apart from generating
a documentation warning.
Change-Id: I30871bfd6975f8268930cce99993a8579242fdb8
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Takes care of the first round of todos and deprecations for Qt6 in
qevent.
Not touching anything that might interfere with changing the class
hierarchy as the file also suggest.
Change-Id: If72d63d8932f1af588785bf77b34532358639a63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
The built in crash reporter on macOS will by default not show the
dialog if the application is not one that will run in the foreground.
Change-Id: I0020520ae2f14a0e2f84fdca1d80ec6fe1247ffd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If we had one test function that just did
tst_Mouse::f1()
{
QTest::mouseMove(w, QPoint(0,0));
}
and another test function that did
tst_Mouse::f2()
{
QTest::mouseMove(w, QPoint(500,500));
}
their corresponding event timestamps were only 1 apart from each other.
This meant that any code that tried to estimate the velocity of a mouse
cursor would get a really high velocity estimate inside f2(). This would
come as a surprise to most people. So to avoid this, we add a 500 ms
timestamp delay between each test function call.
In theory this could also prevent generating a mouseDoubleClickEvent
when a pair of test functions containing a press-release sequence was
run, but there is a separate pre-existing mechanism to handle that case.
Change-Id: Icd4fc35853c09f080466d22411208c7b5c4174b5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The reporter was probably named 'xunit' based on the historical use of
xUnit to refer to testing frameworks derived from Smalltalk's SUnit.
These frameworks typically added their own prefix, e.g. JUnit for Java,
RUnit for R, etc.
The most popular of these was the JUnit framework, and the corresponding
XML output produced by the Ant built tool became somewhat of a de facto
standard, which is probably why we chose to model our reporter after it.
Nowadays however, naming it 'xunit' is problematic as there is actually
a testing famework named xUnit.net, typically shortened to, you guessed
it: xunit.
Test report consumers will typically have a junit mode, and an xunit
mode, and the latter could easily be mistaken for what testlib outputs,
unless we clarify this.
The clarification also allows us to safely extend our support for the
JUnit XML format to incorporate some elements that are nowadays common,
but where we are lagging behind the standard.
[ChangeLog][QTestLib] The formerly named 'xunitxml' test reporter has
been renamed to what it actually is: a JUnit test reporter, and is now
triggered by passing -o junitxml to the test binary.
Change-Id: Ieb20d3d2b5905c74e55b98174948cc70870c0ef9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We were only doing half of what qCleanup was doing in the
exception case, and in an inconsistent order. There's no
reason not to just call qCleanup to align the behavior.
Change-Id: Ic4e63afb4733de5b01a79272cca8908fca3de762
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The debuggerPresent() function was used both to decide whether we should
print our own stacktrace, and if we should start the watchdog timer, but
checking for the macOS crash reporter only applies to the former usecase.
The crash reporter check has now been split into a separate function, only
used to decide whether we should print our own stacktrace or not.
Change-Id: I282aa57a51c14b07d3cbd547b551b6bf81b61897
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
src/corelib/tools/qhash.cpp:2596: (qdoc) warning: clang found diagnostics parsing \fn template <class Key, class T> template <class InputIterator> QMultiHash::QMultiHash(InputIterator begin, InputIterator end)
error: 'QMultiHash' is not a class, namespace, or enumeration
src/corelib/kernel/qobject.cpp:4593: (qdoc) warning: Undocumented parameter 'EXPORT_MACRO' in QObject::Q_NAMESPACE_EXPORT
src/corelib/global/qfloat16.cpp:129: (qdoc) warning: Cannot tie this documentation to anything
src/corelib/text/qlocale.qdoc:1204: (qdoc) warning: Overrides a previous doc
src/corelib/text/qlocale.qdoc:1187: (qdoc) warning: (The previous doc is here)
src/network/kernel/qhostinfo.cpp:597: (qdoc) warning: clang found diagnostics parsing \fn QHostInfo(QHostInfo &&other)
src/printsupport/dialogs/qabstractprintdialog.cpp:346: (qdoc) warning: clang found diagnostics parsing \fn int QAbstractPrintDialog::exec(): error: out-of-line definition of 'exec' does not match any declaration in 'QAbstractPrintDialog'
src/testlib/qsignalspy.qdoc:101: (qdoc) warning: clang found diagnostics parsing \fn QSignalSpy(const QObject *obj, const QMetaMethod &signal): error: expected unqualified-id
src/testlib/doc/src/qttest-best-practices.qdoc:28: (qdoc) warning: Can't link to 'Q_VERIFY2()'
src/widgets/kernel/qactiongroup.cpp:291: (qdoc) warning: Undocumented parameter 'b' in QActionGroup::setExclusive()
src/widgets/kernel/qactiongroup.cpp:305: (qdoc) warning: Undocumented return value (hint: use 'return' or 'returns' in the text
src/widgets/kernel/qshortcut.cpp:542: (qdoc) warning: No such parameter 'context' in QShortcut::QShortcut()
src/widgets/widgets/qdatetimeedit.cpp:632: (qdoc) warning: No such parameter 'minimumTime' in QDateTimeEdit::setTimeRange()
src/widgets/widgets/qdatetimeedit.cpp:632: (qdoc) warning: No such parameter 'maximumTime' in QDateTimeEdit::setTimeRange()
src/widgets/widgets/qdatetimeedit.cpp:632: (qdoc) warning: No such parameter 'less' in QDateTimeEdit::setTimeRange()
Change-Id: I9799b5135e84c4d811674b2d114ef27315bc12df
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Based on https://wiki.qt.io/Writing_Unit_Tests. Some of the
guidelines will be added to the documentation of a particular
class, function, or macro.
Task-number: QTBUG-18368
Task-number: QTBUG-63987
Change-Id: Ied267edc71e370a07f5124ba05432799f595dda6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
From https://wiki.qt.io/Writing_Unit_Tests
Task-number: QTBUG-63987
Change-Id: I7229ac0712d1207c0c9ebdac868c33bb35dcb0f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Add a section about using QEXPECT_FAIL() to skip known bugs.
Change-Id: Icf258b6e20add3b68d62e404fd9ac0db70420bf2
From: https://wiki.qt.io/Writing_Unit_Tests
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Disable the crash signal handler. This makes it possible
to run auto-tests in the browser.
Long-running tests may cause the browser to interrupt
or display the “a web page is slowing down your computer”
message, or not produce any console output while the
test is running.
Change-Id: Ifd53b744bd3652abfb466b78992ce2371eca2536
Task-number: QTBUG-68504
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Move the feature to corelib so that the QMetaType enumeration
values can be properly excluded and there is no need for a
dummy class.
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Task-number: QTBUG-76493
Change-Id: I02499ebee1a3d6d9a1e5afd02517beed5f4536b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
To get less diffs for next merges and pro2cmake changes.
Change-Id: I7fb5ff34bb884072a9964e8e3488c69f4290fca2
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is a temporary measure to work around an implementation bug on
Integrity: For all other platforms, QtPrivate::condition_variable is
just std::condition_variable. On Integrity, it's a class that wraps
QWaitCondition to provide the interface of std::condition_variable.
This allows the use of std::condition_variable across Qt without
running into the Integrity issue. Once we can depend on an more modern
Integrity toolchain, removing QtPrivate::condition_variable is a
simple mechanical change:
s/QtPrivate::condition_variable/std::condition_variable/g;
s/QtPrivate::mutex/std::mutex/g;
Task-number: QTBUG-78450
Change-Id: I293a99d1cdc48691817b926aa51ecd84556e5e90
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Brown paper bag for me, don't use a comma to separate parameters when
calling a function.
Change-Id: I21e16142fab4fd1c2714df13cd6a892b036e899a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This fixes the calls to add_qt_docs to include the target.
Change-Id: I2c4c807bca8faa48bb49f4b8710035f21abfca0e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
... by porting from (QWaitCondition,QMutex) to std::{condition_variable,
mutex} and making the code more accessible by introducing explicit
states.
This patch was originally starting out to just replace QWaitCondition
with std::condition_variable, which is faster and more compact, and
the patch still does that, too. The focus, however, has shifted
towards improving the accessibility of the code, in particular its
states and the transitions between them.
Due to the way QWaitCondition prevents spurious wakeups, this code
could use its QWaitCondition as a semaphore, e.g. where it was calling
wait() in the ctor to be released only when the thread it started has
entered run(). That makes the code unnecessarily hard to follow.
Fix by introducing an enum Expectation which tells what the watch-dog
is currently waiting for, and unmistakably determines the state the
watch-dog is in: ThreadStart, TestFunctionStart, ... The timeout value
is now selected based on the Expectation value, so the timeout is no
longer serving as the implicit state, either.
Also port the defaultTimeout() function to return a
std::chrono::milliseconds directly. Elsewhere in Qt, we guard against
lack of <chrono>, so this unguarded use will also serve as a guide to
see whether all supported platforms now, eight Qt releases after we
formally require C++11 for Qt usage, provide it. Without <chrono>,
there's no timed waiting in the standard library.
Change-Id: If97b601c4090a2a2926fa58c903cfe3ec2656324
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This functionality is especially convenient if meta-object system is
heavily used in a test. For example, if you need to test a bunch of
signals based on their names and/or argument types.
Change-Id: I09a4ecbbd3d0859b5fd466d9dde7679804eb7614
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QTRY_IMPL() exercises QTRY_LOOP_IMPL() twice, once directly, the
second time via QTRY_TIMEOUT_DEBUG_IMPL(); and QTRY_LOOP_IMPL()
deliberately doesn't bound its scope (e.g. with the canonical
do{...}while(0) trick) so that the latter can access its local
variable. Unfortunately, this means the local's declaration in the
second use of QTRY_LOOP_IMPL() shadows the first. So enclose the first
in braces to bound the scope.
Fixes: QTBUG-77297
Change-Id: I849bfe0b8abfb517ed3e783abf86c602163db137
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add overloads for qCompare() for QStringView making use of the fast
formatting helper introduced by 94aa350621
for int.
Speeds up the bug report example by a factor of 3..4.
Task-number: QTBUG-38890
Change-Id: Icc706618b2f1d23b37d354a04d4e1d1cc4b5aee3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Fix else after return/break
- Fix use of int as boolean literal
- Use range-based for in some cases
- Avoid copies by using const-ref
- Remove unnecessary null-check before delete
Task-number: QTBUG-69413
Change-Id: I69f46e6deaa55ef70a8b3a61e6539c79a64aaa23
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
"mac" scope in qmake actually means all mac platforms,
just like "darwin", aka macOS, iOS, watchOS, etc.
Regenerate corelib, gui and testlib after this modification.
This is a requirement for the iOS port.
Change-Id: I029c7e907d13f6ec31816a08602a5930f9ac16a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
- Remove virtual from functions declared as override
- Use " = default" for trivial constructors/destructors
- Remove all special functions from QTestLog
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I812b8116e5b4c927e4e5cee44e63bc705385d866
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I620e40a277dc2b20b0ec26fc32577e66b0456bb3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: Iba0834dc89cbfc215acc5873f31fa6eeed74177d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Factor out a helper template formatting the QCOMPARE failure message
delaying the formatting of the parameters with toString() and use that
for float, double, int and unsigned. This removes the need to always
format and allocate strings for the operands even in the success case,
speeding up the QColor test from 3.3s to 700ms (Windows/release).
Task-number: QTBUG-38890
Change-Id: I999484765bdaed921d3fc35f35a9fbbcd82a9704
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the resource path 'base' was relative it would enter condition 3) in
qFindTestData() and it would actually find the nonsensical "://data" as a
viable candidate. We don't want to enter that case, but rather enter the
subsequent ('Try resources') case
Change-Id: I1928ba02c941e23fee4fec9052a1981e46fa59b7
Task-number: QTBUG-73512
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
You can create multiple instances of QBenchmarkGlobalData as the ctor
is public.
The qmltest plugin does create a static one, but only conditionally
assigns it to the singleton pointer. On shutdown the plugin is removed
and the QBenchmarkGlobalData::current should only be reset by the dtor
if it's actually pointing to the same object.
Change-Id: I616c1ccf6f7a00abf1de342094da88481510bc7b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I366cca6e5755719e8241e76774af6be2b5312627
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were some changes done in pro2cmake, so regenerate the main
qtbase modules to keep everything up to date.
Some new whitespace got added.
Some special cases were removed (ZLIB).
Some opengl code got moved around.
Some plugin types were added.
And some other minor things.
Change-Id: Ie8cba4a9aa6b4b163c39d6cf546ea9e0bfc05c01
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In order for test lib to locate the file requested via QFINDTESTDATA, it
needs the build directory of the test (for example
$builddir/tests/auto/foo/bar) and __FILE__ expanding to a path to the
source relative to this build directory.
With ninja, __FILE__ is a path that is always relative to the top-level
build directory, not the per-test case one. Therefore the path
resolution in testlib fails.
To accommodate this, add_qt_test() now always sets QT_TESTCASE_BUILDDIR
as well as the newly introduced QT_TESTCASE_SOURCEDIR, which, as an
absolute path, removes the need to use __FILE__.
Change-Id: I16c2b0001e38162e6da9fdb1a61f4f8ce634fe46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of generating .html page for each file in an example
project, generate links to code.qt.io, under the correct
path and branch, where the user can browse the example source.
Store all URLs under QT_INSTALL_DOCS/config where other qt5
submodules can access them. The repository name appears in
the URL, so we cannot define a single URL for all modules.
Task-number: QTBUG-74391
Change-Id: I63d4d6d2c352877797b1ee8e057d48c0cd789bff
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Each module that has publically declared classes or structs
that are not meant to be documented is given a dontdocument.qdoc
file to tell qdoc that these classes are not meant to be
documentented. Then qdoc will not print warnings about missing
\class comments for these classes and structs.
Change-Id: I9195f0b546032e1c7642c9da34d85a0a4a9bfb08
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This patch updates the code from the deprecated QRegExp class to
QRegularExpression.
Task-number: QTBUG-25485
Change-Id: I946790f50c6b14787bca31771de5e3a0d5fefe4c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTimer::singleShot is optimized for zero timeouts when using the API
taking a string method name. This optimization was not used for the API
taking a PMF or functor. This patch adds it, making the various API
calls behave similarly from a performance point of view.
The approach taken here requires a QObject context object. If none is
available, e.g. a nullptr was passed explicitly, or the
QTimer::singleShot(O, Functor) API was used, the optimization could
not easily be applied. This is not only bad from a performance POV,
but also poses as a potential source for heisenbugs: Using the
different API versions of QTimer::singleShot would use different code
paths internally, which then would not ensure the expected slot call
order. This problem actually existed already when mixing the
string-based slot syntax with PMF/functors in the QTimer::singleShot
API.
This patch overcomes this hurdle and fixes all of the above: When we
encounter a 0ms single shot timer, and no QObject context object is
available, we fall back to the main thread, or create a temporary
QObject for any other thread. The updated and extended benchmark
shows that this is still a significant performance improvement
over using a timer:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.48 msecs per iteration (total: 748, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
7.20 msecs per iteration (total: 720, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
6.79 msecs per iteration (total: 679, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
6.92 msecs per iteration (total: 693, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.34 msecs per iteration (total: 735, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.90 msecs per iteration (total: 690, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
7.46 msecs per iteration (total: 747, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
6.70 msecs per iteration (total: 671, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
13.75 msecs per iteration (total: 1,376, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
7.05 msecs per iteration (total: 706, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.70 msecs per iteration (total: 670, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
6.58 msecs per iteration (total: 658, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 20977ms
********* Finished testing of qtimer_vs_qmetaobject *********
Without the change to qtimer.cpp, the results are:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
112.84 msecs per iteration (total: 11,285, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
115.62 msecs per iteration (total: 11,563, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
110.81 msecs per iteration (total: 11,082, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.04 msecs per iteration (total: 704, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 746, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
118.42 msecs per iteration (total: 11,842, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
119.35 msecs per iteration (total: 11,936, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
130.96 msecs per iteration (total: 13,096, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
8.08 msecs per iteration (total: 808, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.79 msecs per iteration (total: 680, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
7.49 msecs per iteration (total: 749, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 153995ms
********* Finished testing of qtimer_vs_qmetaobject *********
Additionally, this patch adds a unit test to verify that the slot call
order for 0ms single shot timers is followed while mixing the various
API versions. It fails without this patch but passes now.
Finally, another test is added to verify that using QTimer::singleShot
before a QCoreApplication was constructed is still working properly.
Change-Id: I0d6211554b6198cb3e527be9ec3adc572b1b54ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We may get calls to the MessageTypes-overload of addMessage via e.g.
qSkip, or other functions in QTestLog, so we have to implement the
function.
Change-Id: I9d58c73e93ca918c42448c246c37cc9ae6aa04de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rules of std don't permit us to add an overload for
fpclassify(qfloat16), so we need our own equivalent that we *can*
overload. Deploy it in the few places we use fpclassify().
Extended qnumeric's testing to cover qFpClassify().
Change-Id: Ie5a0a5cc24599d1571404c573d33c682b0d305a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Needed to disable QT_NO_UNSHARABLE_CONTAINERS, as this
triggers asserts.
QMetaType also has some Qt 6 specific code disabled to
get things to compile.
Fix various details in autotests to accommodate for
the changes with Qt 6.
Add a workaround for black lists on macos, where
QSysInfo::productType() now returns 'macos' and not
'osx' anymore.
Change-Id: Ie26afb12a2aac36521472715934a7e34639ea4d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In QCOMPARE, handle NaNs and infinities the way tests want them
handled, rather than by strict IEEE rules. In particular, if a test
expects NaN, this lets it treat that just like any other expected
value, despite NaN != NaN as float16 values. Likewise, format
infinities and NaNs specially in toString() so that they're reported
consistently.
Enable the qfloat16 tests that depend on this QCOMPARE() behavior.
Refise the testlib selftest's float test to test qfloat16 the same way
it tests float and double (and format the test the same way).
This is a follow-up to 37f617c405.
Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- braces on same line as else where applicable
- const where possible
- Same extended logging format for all cases
Change-Id: If0c91f270ce2a9be1d295f42a915900f3b1838cf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We were potentially adding the Apple test logger multiple times, and we
didn't consider whether the existing loggers were logging to file or not
when circumventing them.
We now don't use the Apple logger if it would touch stderr and some other
logger is using stdout. In the case of no explicit logger being specified
on the command line, we allow the Apple logger to take priority over the
default plain test logger.
Change-Id: I31bbec4f4b3ab84ba9a2be35e8e5db08fee071a7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Removes useless indirection and builds on existing primitives in Qt.
Change-Id: I9fe50b21f5f77fc02566d5f5ff04c3e94c830e81
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The QTest::qCompare() implementations were almost duplicates; pull the
common code out into a templated version. Tweaked the
QTest::toString() specialization for float and double (a macro) and
fixed a bous modifier in double's format.
The doubleComparisons and floatComparisons tests in the tst_float.cpp
selftest shared a large block of tests in common, aside from the
difference of type. Break this out into a templated static function
to save duplication.
This prepares the way for using the same templated code for qfloat16.
Change-Id: I2823fd006910c5ff88335d625d1fa05cb7753513
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With "macos" keyword in place, we can blacklist using that
keyword instead of the old "osx".
Change-Id: Ib7a2f88265271df152320cce8594b8f788b47687
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Replace null and '\c nullptr' with \nullptr in the documentation.
Change-Id: I58934eea06943309ba895833f1991629870ab45b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The counter is just how many tests were blacklisted, regardless of
their success or otherwise. Skipping its increment for BXFAIL is apt
to introduce noise in our tracking of how many tests are blacklisted.
Change-Id: I1dd74e5f6619121c21d8741be7bc4e2d1cb43fa9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
Enables the use of e.g. QT_NO_DEBUG in compiler flags, -fPIC, passing on of
QT_NAMESPACE, etc. pp.
Dropping a lot of custom code which handled adding imported targets for
the command-line tools (this is all being handled by CMake already).
It needs to be investigated if we need to resurrect
Qt5GuiConfigExtras.cmake.in in one way or the other.
Change-Id: I4fa141b68fddaad4f33e628c59d5d0b3a7b3a096
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Refactor activate(), so that we eliminate almost all
checks for signal hooks in the common case.
Here are the benchmark numbers showing the improvement
for 100M signal emissions
without change with change
string based connect: 3836 3693
pointer based connect: 4571 4510
not connected: 479 433
disconnected: 559 522
Change-Id: I394e6ea5d5bc96e298e8cc0c763eed78c8041876
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
XML expects '.' as the decimal separator, but when using normal
%f formatting we end up depending on the user's current locale.
By using QString::number() we tap into qt_doubleToAscii which
forces the use of the C locale, giving predictable output.
Fixes: QTBUG-73227
Change-Id: I04d1adae2ef079442605e962007e5ce3fce896b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
With all the headers missing, Creator's clang code model just gives up and
it's impossible to work on testlib in Creator.
Change-Id: I8814264db10992eeec6f45625580f6788d23b56b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt for Python users reading the documentation assume that int(0) can
be passed for pointer parameters. Use the newly introduced \nullptr to
disambiguate this.
In a follow-up step, the \nullptr macro can be defined as None
when generating the Qt for Python documentation.
Task-number: PYSIDE-903
Change-Id: I3a45f87175a0668ab5f3f95f0aff409f7e3ef027
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Christian Tismer <tismer@stackless.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Qt Test library sources specific to Core, GUI and Widgets modules
were moved around in commit 88867e39b.
The new source locations must be referenced in Qt Test documentation
configuration. The same sources are excluded in their original doc
projects, and the related snippet file is moved over to qttestlib.
The commit also fixes the remaining documentation issues for Qt Test.
Change-Id: Ibe011aa83639e574d647f12bc9e53e618781bce6
Reviewed-by: Martin Smith <martin.smith@qt.io>
* Only import features once
* Move Core specific code into its CMakeLists.txt file
* More consistently use target names like "Core" to
refer to "Qt modules". We tend to require either "Core"
or "QtCore" in places, which I find confusing.
Change-Id: Id54161bc5468412750cb9eb7eeb15de3812e8a09
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I was getting:
Actual (reader.validate()) : <null>
Expected (QCborError::NoError): NoError
Change-Id: Ib47c56818178458a88b4fffd1554f1751f447086
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qCompare() implementation for double was handling infinities and
NaN the way tests need, but the one for float didn't; it has just the
same need, so apply the same fix. Extends 79493a3ee1.
Change-Id: I8425026acb61d535e449f579b77fdcd609157f7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Macro parameters should always be enclosed in braces when used.
Plain C strings passed in parantheses are interpreted as
const char[], at least by clang-tidy.
Implicitly decaying arrays into pointers should be avoided and
clang-tidy warns about this. Avoid both problems by always static
casting all messages to const char *.
Change-Id: I2be668169bec2823f69af3aa75086a31b0b31938
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was previously using 50ms steps, which was a bad choice for client
code whose total time-out was comparable to 50ms or less. Reduce the
time-step so that we loop several times within the timeout (but make
sure it's never zero, by adding 1ms).
Change-Id: I0428a7741c0741dfb312e40ae1eda900050195ab
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's not actually exercised by anything in our source tree, but is
potentially useful and has been part of the documented public API for
some time. So mention that the caller is responsible for delete[]ing
its return and add a test that exercises it.
Task-number: QTPM-1385
Change-Id: Ifc5284b9eb1b678cf3c9708c681311e874838fc6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use array dereferencing notation ptr[expr] rather than the more
verbose and less readable *(ptr + expr).
Change-Id: Ie98986e7f622aa1a94f3f14bc362ed65767f9d92
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A count(T *list) was declared but not defined; and the plain count()
that was defined isn't called by anything. It's in a private header,
so can be removed without harm.
Task-number: QTPM-1385
Change-Id: I1ac580d57996895a4123b4f55fa984e9c8001ecb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QTest::qtest_qParseArgs() takes a needlessly mutable parameter.
This needs transient legacy version until qtdeclarative is converted
to use the const-qualified variant.
Change-Id: I19fad25423f6f1ea7d5fac537815f4f633ac4405
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This reverts 4fe68ffbe5,
1dfc16f6da and
9545bee98a2431d4ef4c3449631a5fcb8d9bd57a; this feature has not been in
use for some time, so is just dead code.
[ChangeLog][QtTestLib] Removed support for GPU_BLACKLIST files.
Reimplementations or equivalents of QTEST_MAIN() should remove their
uses of QTEST_ADD_GPU_BLACKLIST_SUPPORT and its _DEFS; they are still
vacuously defined, but serve no remaining purpose and shall be
undefined in due course.
Change-Id: I94ffd5c37ce4e1f7cf25d3c7ae8d40696b74c911
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The version we're using is at least seven years old.
Let's try staying up to date ...
Change-Id: I450a2fc37c22740fe554a81b471bf0fad340498e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qabstractitemmodeltester.cpp:223:31: internal compiler error: in expand_expr_real_1, at expr.c:9170
Change-Id: I098c1bdf706512c91c649205f4675de0ca374227
Reviewed-by: David Faure <david.faure@kdab.com>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Tor Arne Vestbø
Jarek Kobus
Lars Knoll
Lars Schmertmann
Alexandru Croitor
Nico Vertriest
Giuseppe D'Angelo
Shawn Rutledge
Oliver Wolff
Topi Reinio
Kai Koehne
Fabian Kosmale
Volker Hilsheimer
Edward Welbourne
Qt Forward Merge Bot
Martin Koller
Tor Arne Vestbø
Liang Qi
Leander Beernaert
Simon Hausmann
Allan Sandfeld Jensen
Jan Arve Sæther
Linus Jahn
Olivier Goffart
Friedemann Kleint
Thiago Macieira
Leena Miettinen
Morten Johan Sørvig
Marc Mutz
Vitaly Fanaskov
Tasuku Suzuki
Ulf Hermann
Heikki Halmet
Albert Astals Cid
Tobias Hunger
Martin Smith
Samuel Gaist
Milian Wolff
Mårten Nordheim
Kevin Funk
Robert Loehning
Mikhail Svetkin
Tony Sarajärvi
Christian Ehrlicher
Paul Wicking
Sergio Martins
Venugopal Shivashankar