The value will be propagated from Qt build.
Task-number: QTBUG-104858
Change-Id: Iae2c32c3037438f41b92f9ee28004f30eb4e3210
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Wrap some tests that specifically test deprecated APIs
into #ifdefery
* Refactor some tests to use available methods
Task-number: QTBUG-104858
Change-Id: I03e318004ce1c2718ee574bf11e00df9bc04bcaa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Moved the modal window resolution to
QWasmWindow::requestActivateWindow so that multiple async activation
events are not issued in unpredictable patterns.
- Request activation on added windows and on stack top in case of
window removal
Pick-to: 6.4
Change-Id: I6f02cf1b7e83abb7961caf311ffc83e91c8bf810
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If restoring a QHeaderView state from a data stream with version Qt_5_0,
check alignment and resize mode properites for out-of-bound values.
If out of bounds, try QDataStream version Qt_6_0, which is used by KDE
apps compiled with 5.15.2 or 6.2.3.
QFileDialog stores settings in the same settings file across different
Qt versions, using different QDataStream versions. That makes
QFileDialog vulnerable to the issue (QTBUG-104962). A respective auto
test is added with this patch.
Fixes: QTBUG-104962
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104425
Change-Id: I666207fca7ab837ad27a247e504a40757ee8afab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
CUPS has a feature called printer instances that allows saving
different sets of default options for a single print queue,
s. section "Creating Saved Options" at [1].
A printer instance can be set up using e.g.
lpoptions -p printer/instance -o name=value
The printer instance is then listed with the print
queue name and the instance name separated by a slash
in the 'lpstat -e' output.
Qt also supports CUPS printer instances and displays
them using the same as printer names.
However, tst_QPrinterInfo::getPrintersFromSystem was
previously truncating the printer name at the slash,
so the comparison of printer names on a system that
has CUPS printer instances set up would fail e.g. as follows:
********* Start testing of tst_QPrinterInfo *********
Config: Using QtTest library 6.5.0, Qt 6.5.0 (x86_64-little_endian-lp64 shared (dynamic) debug build; by GCC 12.1.0), debian unknown
PASS : tst_QPrinterInfo::initTestCase()
QDEBUG : tst_QPrinterInfo::testForDefaultPrinter() Test believes Default Printer = "PDF"
QDEBUG : tst_QPrinterInfo::testForDefaultPrinter() QPrinterInfo::defaultPrinter() believes Default Printer = "PDF"
QDEBUG : tst_QPrinterInfo::testForDefaultPrinter() QPrinterInfo::availablePrinters() believes Default Printer = "PDF"
PASS : tst_QPrinterInfo::testForDefaultPrinter()
QDEBUG : tst_QPrinterInfo::testForPrinters() Test believes Available Printers = QList("Canon_MX390_series", "PDF", "PDF", "PDF-5cm-margins", "dummy", "dummy-ricoh-c3000", "tofile-hp-officejet-8600", "tofile-ricoh-aficio", "tofile-ricoh-mufu", "tofile-samsung-m2875", "tofile-test-tdf106963", "tofile-xerox-phaser-6510")
QDEBUG : tst_QPrinterInfo::testForPrinters() QPrinterInfo::availablePrinters() believes Available Printers = QList("Canon_MX390_series", "PDF", "PDF-5cm-margins", "PDF/myinstance", "dummy", "dummy-ricoh-c3000", "tofile-hp-officejet-8600", "tofile-ricoh-aficio", "tofile-ricoh-mufu", "tofile-samsung-m2875", "tofile-test-tdf106963", "tofile-xerox-phaser-6510")
FAIL! : tst_QPrinterInfo::testForPrinters() Compared values are not the same
Actual (qtPrinters.at(i)) : "PDF-5cm-margins"
Expected (testPrinters.at(i)): "PDF"
Loc: [/home/michi/development/git/qt5/qtbase/tests/auto/printsupport/kernel/qprinterinfo/tst_qprinterinfo.cpp(232)]
Fix this by adding the slash character to the regex.
[1] https://www.cups.org/doc/options.html
Change-Id: Id0dc27a8b4c592847ed364cebf277e988039cad4
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Q_DECLARE_EXPORTED_LOGGING_CATEGORY is available from 6.5 only, hence
cherrypicking this solution fails.
Change-Id: Ib3351a8846bb5cf6047cd2d13c9f7cd242df9c93
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If an included header brings in MacTypes.h it will cause issues,
so rename the enum to be on the safe side.
Pick-to: 6.4 6.3 6.2
Change-Id: I29ec795be74a65d4f2267d8121a514bf192cf969
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QObjectPrivate::declarativeData member is stored in a union with
currentChildBeingDeleted. The QObject destructor always sets the
currentChildBeingDeleted member of the union. It also sets the
isDeletingChildren bool, which is the only way to find out which union
member we can safely access.
While the QObject destructor is deleting children and isDeletingChildren
is set, we must not access the declarativeData member of the union.
Add a test case that initializes the function pointers for the
declarative handlers and constructs a situation where an object
emits a signal while it is destroying children.
Fixes: QTBUG-105286
Pick-to: 6.4 6.3 6.3.2 6.2 5.15
Change-Id: Iea5ba2f7843b6926a8d157be166e6044d98d6c02
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Otherwise new clients will not be handled when they try to connect
Amends 29a1fe72a0
Pick-to: 6.4
Change-Id: Ifff052d1bf27682df2782faa285a257c9b41d86f
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This fails on Android 12 in CI.
Task-number: QTBUG-105739
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf3deb6b84564f12b5172f2522875fe70f8ce87b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This fails on Android 12 in CI.
Task-number: QTBUG-105738
Pick-to: 6.4 6.3 6.2
Change-Id: I94fcefae3d88087cd96f4043b015f9469ed629a9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Android kills this test case which tries to use too much memory,
or it times out.
Pick-to: 6.4 6.3 6.2
Task-number: QTQAINFRA-4748
Change-Id: Ifce92533d50f4c463ee10fe80e7654ad16172a35
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The default camera to plane distance is 1024, when rotating a big image
along the x or y axis, some areas of the screen may move above the
camera, causing the rotation to fail. A new rotation interface has been
added to allow users to specify the distance from the camera to the
plane themselves when rotating the QImage. Also, this support has been
added to QMatrix4x4::projectedRotate.
[ChangeLog][QtGui][QTransform] Added overloads to rotate() and
rotateRadians() that allow specifying of the distance to the rotation
plane.
Fixes: QTBUG-105088
Change-Id: I81f629916ddd9b6ab84e0282191e4284a88a85f5
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Windows VMs are provisioned with shared folders that are available as
\\${COMPUTERNAME}\testshare(writable)
so we don't need to access a remote SMB server over network anymore just
to test whether our string-parsing code handles UNC paths correctly.
Add a QTest::uncServerName() helper function to the shared filesystem.h
header and use that instead of QtNetworkSettings::winServerName. The
latter is now only used in tst_NetworkSelfTest::smbServer().
Pick-to: 6.4
Change-Id: Id0da66369ad0f4a980d612de2a31a391f1192253
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Not just the ones we added to the pending sockets list
Pick-to: 6.4
Change-Id: I0a0016fe39df7ca2fc3f0c4e4111195bc6d90198
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If a client doesn't send any data then we would leave the socket open
for as long as it needed, wasting resources. Add timeouts to limit the
amount of time this can happen for.
Since there is a limit on number of sockets that the server will have
queued, having idle sockets stick around forever is a vector for ddos.
Pick-to: 6.4
Change-Id: Ida6251c92c625eeadf2065861b840b14255654b8
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
SecureTransport ignores any content that comes in until it is large
enough to be a handshake. So a plaintext client may be left hanging
while it is waiting for a response.
Pick-to: 6.4
Change-Id: I501ae61d89d516765c7ba5f0d916d9246fde5d4d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Build a simple widgets qmake project when targeting iOS in the CI.
This ensure we don't introduce basic regressions in the .pri / .prl
file generation.
Make sure to target the ios simulator, so we don't require any
code signing or provisioning profiles.
Pick-to: 6.4
Fixes: QTBUG-96058
Change-Id: I1a5564e838a5ce3cac89a37a5a4ddee74d3400f3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
And use the new overloads in examples and tests.
[ChangeLog][QtXml][QDomDocument] Deprecated the old setContent()
overloads in favor of the new ones that take ParseOptions and
ParseError.
Task-number: QTBUG-104507
Change-Id: I61b37eba2fe3002c03bddc90f6877676d539f7ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Couldn't reproduce flakiness on OpenSUSE KDE/X11 and can't see any
history of flakiness in the last 3 months in our testresults database.
Task-number: QTBUG-62967
Task-number: QTBUG-63262
Change-Id: Id50291798eda922283e04b45205ae9105e9fdab2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Window activation is not working reliably on X11 when combined with
X11BypassWindowManagerHint, see QXcbWindow::requestActivateWindow().
The test itself counts repaints, so qWaitForWindowExposed() shouldn't be
needed.
This way we don't need to QSKIP() the test if window activation fails.
Fixes: QTBUG-98921
Change-Id: I849b7261c757fb7cbcde73f11bbe1a74a862cb9c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Removed entries that do not reproduce on OpenSUSE and that are no
longer flaky in our CI according to our testresults statistics database.
Adjusted entry for resizeAnchor testcase which has been seen flaky in
RHEL-8.4 and cursor2 which is very flaky on macOS.
Task-number: QTBUG-105249
Task-number: QTBUG-105247
Change-Id: I3e258f81d6bbf540a4b3dec763fdfd4bdc511847
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Can't reproduce in OpenSUSE, and no flakiness has been seen in the past
6 months in our testresults statistics database.
Task-number: QTBUG-63260
Change-Id: I465aa4b9f82726e9685f64b0dc235d3235c4bd9c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Executing the tst_qgraphicsitem::sorting() testcase individually always
fails on my KDE/X11 desktop. The window never seems to have focus and
the call to qWaitForWindowActive() returns error after a few seconds.
It seems qApp->setActiveWindow(&view) never succeeds in giving focus to
the window containing the widget.
Fixes: QTBUG-105221
Task-number: QTBUG-74760
Change-Id: I148dab09d0fb592376b3902e4ed10799f9a52274
Done-with: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This led to an infinite recursion in case the annotation was completely
missing. Instead of trying to fix that, I'm simply implementing the
"### Qt6" request from c62f717226 .
[ChangeLog][qdbusxml2cpp] Removed the old compatibility code that
accepted "In" annotations for signal argument names, introduced in Qt
5.8.
Pick-to: 6.4
Fixes: QTBUG-104722
Change-Id: Ie4bb662dcb274440ab8bfffd1709bfc3daf0846d
Reviewed-by: David Faure <david.faure@kdab.com>
The old stack structure used to keep track of windows has been improved
to conform to the actual windowing assumptions: there shall be one root
window, which is always at the bottom. The first created window
immediately becomes the root window. Should the root window be removed,
all windows are non-root, i.e. any of them can become the top-level window
Fixes: QTBUG-105094
Pick-to: 6.4
Change-Id: Ic553244fa9f5bc3ee590b702935e66cfc62d5f8f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Running tst_qrhi -platform eglfs will pass on RPi4 / Mesa 22.
This does not test Vulkan of course since the platform plugin cannot
create a Vulkan instance.
Running tst_qrhi -platform vkkhrdisplay will enable Vulkan but will
still try OpenGL since the autotest does not query the platform
integration about OpenGL support. Make this nicer by skipping most of
the GL test if the platform integration we have cannot handle OpenGL
stuff anyway.
For some tests the data-driven approach has to be removed since doing
QFETCH without any rows will crash. These two OpenGL-specific tests
now check OpenGL support directly and QSKIP if needed.
While we are at it, fix up the Vulkan instance API version as well.
Pick-to: 6.4
Change-Id: I2891c04540bc2dfd0ccf475629bd23542bff15f5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The _data function is useless without its test function (and it's not
used in other _data functions).
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I7aa6006ed1a9d89008577b750af4ea717dae237f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If a font family has several instances from different foundries,
we disambiguate this by adding the foundry name in brackets behind
the family. But QFontDatabase::hasFamily() would only check for
families().contains(familyName). So if the database contains e.g.
Foo [Bar] and Foo [Baz] then a check for hasFamily("Foo") would
fail.
So we need to actually check for the family name instead. In
doing this, we also skip the extra step of building the list
and then searching it, but just go directly to the source.
This removes the BLACKLISTing of Ubuntu and also introduces a
QSKIP on Unix-based platforms without fontconfig, since there
is no way to know which default fonts are acceptable on those
platforms.
Pick-to: 6.4
Fixes: QTBUG-86967
Change-Id: Id8ad80a1671daf1c14fbad8bb8f4c51ee1c59709
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As discovered in the expanded testing of QTRY_COMPARE() using the same
class, the timer needs a context object and a slot to call.
This amends commit 35ad157d88
Pick-to: 6.4 6.3
Task-number: QTBUG-104441
Change-Id: I41fc23de84ce8c7d6608db0005276a2071974494
Reviewed-by: Jason McDonald <macadder1@gmail.com>
In the process, simplify the latter while adding some actual
time-variation for the QTRY_* loop to navigate round - based on the
extendedcompare test's ClassWithDeferredSetter. Testing remains
primitive, but is at least a bit more thorough.
Pick-to: 6.4
Change-Id: I40be8fb485f3f18f0a4f4bc62ad36cccac691979
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
These contain output only ever sent to stderr, which tst_selftests no
longer looks at; it merely verifies stderr is empty for all tests
except those expected to produce stderr output, and ignores the stderr
output for these last.
Change-Id: I50fee445d84c2d125e6db5303fc389e87746455e
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The way the Qt 6.0 QMetaTypeInterface was designed, using a static
inline variable in a template, would normally require the linker and
dynamic linker to merge all copies and choose a single copy as the
official one. But because of hidden visibility and of Windows DLLs,
QMetaType already copes with multiple copies NOT getting merged. So we
may as well ask the linkers not to bother and use simpler, local
relocations to find those symbols.
They are all supposed to still be equivalent and it's an ODR violation
if they're not.
The Apple ld64 linker complains if you use this type of global
relocation:
ld: warning: direct access in function
[...]
to global weak symbol
'QtPrivate::QMetaTypeInterfaceWrapper<int>::metaType'
Fixes: QTBUG-93471
Pick-to: 6.3 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f98a10aa719434
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Because of the template shenanigans. This is just to make sure.
Pick-to: 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f989e7d555894f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This fixes the flakiness seen in OpenSUSE KDE/X11 desktop.
Fixes: QTBUG-70590
Task-number: QTBUG-105177
Change-Id: I7c2431e58b2a60ea04e26d4e70c0f2867d544ff2
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Use activateWindow() that is documented as the right way to raise a window.
Task-number: COIN-892
Change-Id: Ic9aadee0d3a526fd8e46e5b1099b5b0861700207
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
I can't reproduce the test failing after hundreds of iterations on
OpenSUSE, and the test hasn't flaked at all in our CI in the last 6
months according to our dashboards.
Fixes: QTBUG-70612
Change-Id: I2397f3db5caf97f674de7d75fd99bd14c14166a4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I can't reproduce the issue after hundreds of iterations on OpenSUSE,
and the test hasn't flaked at all in the last 3 months according to our
dashboards.
Task-number: QTBUG-66371
Change-Id: I9c4daf851e09fbcb47a6ab39418e7b213ccd9dfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
ownMethodIndex works for all kind of methods, also for constructors.
Therefore, remove the assertion there (that checks for non constructors)
and add a test in qtbase so it does not happen again.
The test broken by the assertion is in qtdeclarative:
tst_QJSEngine::newQMetaObject().
Also rename QMetaMethodPrivate::ownConstructorIndex() to
ownConstructorMethodIndex() as the previous naming implied that
ownMethodIndex() could not be used for constructors.
amends b73ab954df
Task-number: QTBUG-105360
Change-Id: I0244993ed79bee055645b5443f5d02e1c089a6c6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Those were workarounds to passing a comma to a macro, but there are ways
around it. The simplest is to just use variadic macros; another, which
has been applied to Q_DECLARE_METATYPE for a long time, is to define an
alias to the thing you're trying to use.
Change-Id: Ie4bb662dcb274440ab8bfffd17097fbf0c53eabc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][CMake] The target-based variant of qt6_add_resource gained
the option BIG_RESOURCES. This can be used instead of
qt6_add_big_resources, which is not target-based.
Fixes: QTBUG-100268
Change-Id: Ib3fa783cbfbfd10f59c2f952bc88508a91f25e26
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ivan Solovev
Mikolaj Boc
Axel Spoerl
Michael Weghorn
Lucie Gérard
Tor Arne Vestbø
Volker Hilsheimer
Mårten Nordheim
Tatiana Borisova
Assam Boudjelthia
JiDe Zhang
Alexandru Croitor
Sona Kurazyan
Dimitrios Apostolou
Thiago Macieira
Laszlo Agocs
Marc Mutz
Eskil Abrahamsen Blomfeldt
Edward Welbourne
Sami Shalayel
Joerg Bornemann