Instead of using the actual compiler version to determine which C++11
features to enable, let's just use the Mirosoft compiler version that
the actual compiler is claiming compatibility with. That is because the
limiting factor is often the standard library, not the compiler itself.
This will cause some features that do not depend on the library to also
be disabled, but oh well. Better upgrade your Visual Studio version
instead.
Task-number: QTBUG-57696
Change-Id: I3e4e5051937c40319d6efffd14912cd4fdab25fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The __popcnt family of intrinsics with MSVC generates directly the
POPCNT instruction and are documented to do so:
https://msdn.microsoft.com/en-us/library/bb385231.aspx
So we can't use __popcnt unless the target processor supports it.
[ChangeLog][Windows] Fixed a bug that caused applications to crash with
"Illegal instruction" faults when compiled with Visual Studio and run on
some older processors.
Task-number: QTBUG-58446
Change-Id: I445bb15619f6401494e8fffd149d83bd2a7e3376
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This ensures at compile-time that Qt libraries do not use any APIs that
are not safe for use in application extensions, and fixes warning
messages that appear when linking to Qt libraries that are not built
with this flag, when used in an application extension.
This is especially important on watchOS where *all* "applications" are
actually application extensions, and on other Apple platforms if
application extensions are developed using Qt.
Task-number: QTBUG-40101
Change-Id: I022046f2584e0222253d33052b0abc221d7c93d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The patch fixes a number of bugs in code, and removes dead logic
clarifying that MIPS DSP, like ARM NEON, has no runtime detecton.
Change-Id: If2f4eea68da5b2eaa80b8e9c8258206d8c1b7173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was an off-by-one error in the while loop for aarch64: we start
counting at 0 for the first position, so the last valid input position
is "a+7", not 8.
This wasn't covered by the tests, nor was the SSE2 version, so now there
are also tests for both versions.
Change-Id: I7eb8c5708e6179f45ea56885b0e66e1a37969c1d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was automatically merged from 5.6 branch. Qt 5.8 does not support
Windows CE.
Change-Id: I6968f50ef568035c224851d595d6c057128491a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
error: base class ‘class QBasicAtomicPointer<void>’ should be explicitly initialized in the copy constructor [-Werror=extra]
Change-Id: I2bc52f3c7a574209b213fffd149b4b71f3006be5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This patch replaces QRegExp by QString search and replace.
Change-Id: I11165afa45f8f9a856e6fb9b64929e4bdacb913d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This corrects an issue converting dates and times to strings which would
use the "default" time zone (CFTimeZoneCopyDefault) in contrast to the
rest of Qt which uses the system time zone in such contexts.
[ChangeLog][QtCore][QLocale] Qt functions now always use the system
time zone on Apple platforms, the same that low-level C APIs like
localtime() does. Previously, converting dates and times to strings
would use the "default" time zone (which is almost always the same as
the "system" time zone but could be changed with the Apple API).
Change-Id: I2942c3c1c8aa01a0130f1b7280371a72bdb01b1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I62448507f80daf6be72994ee99f0fb1aa107eb78
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
warning C4267: 'argument': conversion from 'size_t' to 'int', possible loss of data
while compiling class template member function 'QVarLengthArray<T,Prealloc>::QVarLengthArray(std::initializer_list<T>)'
Change-Id: I36f5ef65ec1f511eac7f3ad1a4717d18f7dc9ce4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Gcc defines neither _MIPS_ARCH_MIPS32 nor __mips32 on MIPS32
architectures, instead __mips is defined to 32.
This fix exposed bit-rot in qdrawhelper where qt_memfill32 was set as
a function pointer despite not being one since Qt4.
Change-Id: I87461823e54fa3166223ebf97175fd05d2f2fd16
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QString::fromRawData code sample still shows the use of QRegExp. This
patch updates it for QRegularExpression and cleans the code.
Change-Id: Iff0f736cdbdd7d35c65fde1496ce9f838a8f5c6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation of QStringList is missing some mention of
QRegularExpression as well as still using QRegExp in some sample code.
This patch fixes that.
Change-Id: I4a7c9fe8e5ae7c73497192bb71d1fa66ee864bd2
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
There should be no blank lines in \value content, otherwise qdoc
ends the list and starts a new one.
Change-Id: Idddc7992317894487445aea36397136df40b9691
Reviewed-by: Martin Smith <martin.smith@qt.io>
INTEGRITY doesn't support self-extending stack. The default stack
size for a pthread on INTEGRITY is too small so we have to increase
the default size.
Change-Id: I0787d14938cf5e7e96c35df204212c8e83aa8893
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QFileSelector] Removed the requirement for an unused
default base file in case you want to load only a variant.
When the base file (e.g. /image.jpg) was missing, no selectors were
considered and it was not possible to load variants of this file (e.g.
/+android/image.jpg, /+android/+tablet/image.jpg) without specifying the
directory as well.
As a work around, one previously had to place a default file in
the base location, which is undesirable in some cases because:
1. The extra file consumes unnecessary space.
2. It is impossible to encapsulate platform-specific implementation
details by hiding files in a subdirectory.
Task-number: QTBUG-51230
Change-Id: I4c7f9ec952bff6e5b7738d8cabe3c762c208a38e
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
This is a version of QByteArrayMatcher that calculates the
Boyer-Moore skip table at compile-time instead of at run-time,
making this class more generally applicable than QByteArray-
Matcher itself, at least for statically-known strings.
The compile-time part requires C++14 constexpr support, but
the class should compile and work even in C++98 mode, just
with runtime initialization of the skip-table.
While touching tst_qbytearraymatcher, clean up the static
global QByteArrayMatchers there and add tests with needles
longer than 255 characters for QByteArrayMatcher, too.
[ChangeLog][QtCore] Added QStaticByteArrayMatcher.
Change-Id: I0662f262ab19b79ae4096f3ab384d5b3ada72347
Reviewed-by: David Faure <david.faure@kdab.com>
QHostAddress is one of the few classes in Qt which is pimpl'd but not
implictly shared, making it suprisingly expensive to copy around, return
by value and so on. Being pimpl'd it is also still lacking a move
constructor, like most of such types in Qt.
Remove a bit of the surprise factor and make it implictly shared. In
practice this means making it eagerly parse host addresses from strings.
Since it was entirely implemented out of line, replacing it with a
implictly shared implementation is binary compatible.
[ChangeLog][QtNetwork][QHostAddress] QHostAddress is now implicitly
shared.
Change-Id: Ia7ff94efcb74e7321b7607cd690c5c162f685605
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
operator== and operator!= have been disabled, as they are likely to be
misused and are not particularly useful in practice. The same goes for
the QVersionNumber conversion convenience functions.
The constructor normalizes version component values so that invalid
versions like [5, -1, 3] cannot be constructed and made to wreak havoc
on assumed logic.
Change-Id: Iabb6876bd5dc11522032837f78cf825b921a49b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
clang/g++ still warn when encountering the implementation of a
deprecated function.
Follows up 21a247adb4
Change-Id: I6ab1695acb520ef7ce7cb1896545d02607c3ce29
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
So that QFlags can use an (un)signed int matching the
underlying type as identified by the compiler and not by us.
Requires fixing a few warnings about sign conversion due to
QFlags misusages in qtbase that were either plain wrong, or
were relying on the enum being backed by an (un)signed int
when it wasn't.
Keep qtypetraits.h in the source tree in order to prevent
source breaks if some downstream #includes it (note however
that it did not contain any public API).
Change-Id: Ib3a92b98db7031e793a088fb2a3b306eff4d7a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of sequential .arg(const QString &) callings.
It saves memory allocations and prevents unexpected results
if replacing strings contain place markers.
Found with clazy's qstring-arg check.
Change-Id: I3912275a6e11c6fb7559ff5623f2e8cde9b7f07a
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... along with the two matching unused methods of QDateTime's test.
Change-Id: Id11a4b1b0132587f0df451d49c0043e9425d87ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's supposed to be a full alignment (like Top | Right), not
just one flag.
Change-Id: I656adda83742d7e4f31955322e937e979b32747c
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids so many complications. The prior code, using
SystemTimeToTzSpecificLocalTime(), lead to unhelpful results when the
QDateTime() implementation used MS-POSIX's defective mktime().
Although SystemTimeToTzSpecificLocalTime() is actually more correct,
we were getting inconsistent results by mixing the two: and
eliminating the use of mktime() turns out to be decidedly tricky. So,
to avoid inconsistency, stick with a UTC time (which is what FILETIME
is defined as). Change QFileInfo's methods to explicitly convert
.toLocalTime() where appropriate and document that these methods do
indeed return local time (as we conjecture has been taken for granted
by callers).
Also added a regression test for the reported case of this going
wrong. A time-stamp from before Russia's (permanent, not DST) change
of TZ could end up inconsistently handled between file-system
meta-data and raw date-time APIs, due to cross-talk between different
MS-Win time APIs.
[ChangeLog][QtCore][QFileInfo] Made sure that all file lifecycle times
are in local time. This was probably true before, but is now explicit.
Task-number: QTBUG-48306
Change-Id: Ic0b99d25c4168f623d31967bc60665c0c4f38a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For language "Traditional Chinese" on iOS with region "US",
the logic was formerly to attempt a match on country/language/script (fail),
followed by country/language (which would result in script defaulting to
"Simplified"). Now, the logic is to try language/script first if script is
specified. Failing that, language/country will be attempted.
Task-number: QTBUG-39639
Change-Id: I75a774b1e66686e95167ff221458a97a7ea2660d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jason Erb <jason.erb@sparist.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we use QLatin1String we should include qstring.h.
Change-Id: Iebd761b98e515e9cd9cd34b96a0f8a602d00f086
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initial support for INTEGRITY to build QtBase
Change-Id: I18f36b4dea9107f01e1c281e4b62880590c777a1
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Risto Avila <risto.avila@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Honor the rule of five. Copy assignment was already disabled.
Disable also copy construction, but re-enable the move special
member functions.
This requires making the container non-const; to avoid detaches
and keep compatibility with containers that only have begin/end
(but not cbegin/cend), use qAsConst. This requires moving qAsConst
definition a bit up in the file.
Change-Id: I19cd74437cf69baceada9483920a21e96d7b1727
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't use Dinkum choices when the C++ library is libC++ (QNX 7.0).
Change-Id: I18c3f716ccfb0c02dbfdc01eac4b707d3ae9aab6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A directory is empty when it doesn't contain files or folders.
We can exploit QDirIterator::hasNext() to check whether this is the
case. This is efficient since it doesn't list the whole folder (in the
non-empty case).
Test cases are added for both the empty and non-empty cases.
Change-Id: I0f7e26782c0f97f9c16f928dab6cae37927875d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
StripTrailingSlash removes trailing slashes from the path, but not the
entire URL.
Task-number: QTBUG-47607
Change-Id: Id62b971e563e290b7ca000576bcc328616a3f1a2
Reviewed-by: David Faure <david.faure@kdab.com>
qmutex.h is updated to let clangqdoc document the threads case,
because the no-threads case is not interesting, and clang can
handle everything declared in qmutex.h. This change required
that a few minor qdoc errors be corrected in qmutex.cpp as well.
Change-Id: Icb4122f2179d6aad39dc68376498364820143297
Reviewed-by: Martin Smith <martin.smith@qt.io>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Most of these involved moving or removing extraneous
aide-memoir comments left by programmers between qdoc
comments and their functions. There were also some
cases where Q_CLANG_QDOC had to be tested to make
something visible to clangqdoc. And there were a few
functions that should not have been documented at all.
Change-Id: I3bf7c397a9e5ddbffc40cc1fee7f19cad71a1ae7
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This update undefines Q_GADGET when clangqdoc is running.
With Q_GADGET defined, clangqdoc expects documentation for
QtGadgetHelper in each class where Q_GADGET is used.
Note that the documentation for the Q_GADGET macro is still
generated.
Change-Id: I3e6e6644c2c537c00c44ae77664892e125046daa
Reviewed-by: Martin Smith <martin.smith@qt.io>
Commit 9ca635482d renamed the configure
feature from pcre to pcre2, which unfortunately means that people would
have to change their build scripts to pass -qt-pcre2 instead of
-qt-pcre. As the configure check already verifies the correct PCRE
version for use (when using the system library), it seems more
convenient for our users to retain compatibility and call the configure
feature "pcre" again.
Change-Id: If26e7888814d8204d43baf7298d9916a4f856a48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In this case, the issue was ICC, when compiling QtQml:
qv4sequenceobject.obj : error LNK2019: unresolved external symbol "__declspec(dllimport) public: void __cdecl QList<class QItemSelectionRange>::replace(int,class QItemSelectionRange const &)" (__imp_?replace@?$QList@VQItemSelectionRange@@@@QEAAXHAEBVQItemSelectionRange@@@Z)
referenced in function "public: static bool __cdecl QV4::QQmlSequence<class QItemSelection>::deleteIndexedProperty(struct QV4::Managed *,unsigned int)" (?deleteIndexedProperty@?$QQmlSequence@VQItemSelection@@@QV4@@SA_NPEAUManaged@2@I@Z)
This applies the same fix as qvector.h has had for ages due to QPolygon.
Change-Id: I15b62e0f9cec482fbb40fffd1490d791db5056bc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
getMaximum() and getMinimum(), called during parsing, create new
QDateTime instances, which on Linux end up calling mktime().
Making these static (for the common case of LocalTime spec)
improves performance dramatically, when parsing several date/times.
tests/benchmarks/corelib/tools/qdatetime/ (after fixing it to
actually parse a valid date/time) says:
RESULT : tst_QDateTime::fromString():
- 36,742,060 instruction reads per iteration (total: 36,742,060, iterations: 1)
+ 24,230,060 instruction reads per iteration (total: 24,230,060, iterations: 1)
Change-Id: I0c3931285475bf19a5be8cba1486ed07cbf5e134
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's quite a simple addition and required for the ahead of time compilation
tool for qtdeclarative.
Change-Id: Iba85ae5182919cdb5ab15a0b643e57c103eae632
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This allows the Dptr parameter of the Q_DECLARE_PRIVATE_D macro to be
a smart pointer, not just a raw pointer.
Change-Id: Iaf27352e327e9aedea149461d47f2f11460a42dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The article does answer the questions asked in the bug.
Task-number: QTBUG-56629
Change-Id: Ib8bac0acf45bc10598fc47feb6dd73005b5ad040
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "qYouForgotTheQ_OBJECT_Macro" function hasn't been used in
qobject_cast since commit 7d7e8ae3fa (Qt
5.2), when Olivier made the error use Q_STATIC_ASSERT instead.
Change-Id: I15b62e0f9cec482fbb40fffd1490d7c050084369
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This reverts commit 91a2c8630b. We
promised in the Qt 5.6.2 changelog to do it in Qt 5.8. It was a
temporary compatibility hack.
[ChangeLog][QtCore][QUrl] The temporary compatibility in
QUrl::resolved() that treated the base URL as relative if its scheme
matched the current URL's scheme has been removed.
Change-Id: I3e4e5051937c40319d6efffd1490eb9a5a948481
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Two sentences that read like author notes likely added by accident.
Task-number: QTBUG-56630
Change-Id: I7a0b114e128f95e54e9e8f26b43493f67747d650
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This code always intended to follow the recommended checking order from
the spec, which says "if multiple globs match, use file contents".
But if the globs had different weights, it would discard globs with
lower weights, and then wrongly conclude, if there is only one glob
left, that there was no ambiguity.
The correct way is rather: remember that multiple globs matched,
do determination from contents, and if that didn't work, *then* use
(one of) the highest-weight glob(s).
This fixes PGP-encrypted *.asc files being detected as text/plain rather
than application/pgp-encrypted.
(https://bugs.kde.org/show_bug.cgi?id=346754)
Change-Id: I734459daf9f502baa95ebb89432819964e0ce304
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* apply endianness to the mask as well
* do not apply endianness to "host" entries, they were wrongly behaving
exactly like "big endian" entries.
The issue with the mask was detected by the audio/aac magic
<match type="big16" value="0xFFF0" mask="0xFFF6" offset="0"/>
which failed to identify the test file ct_faac-adts.aac since it was
applying the mask 0xFFF6 instead of 0xF6FF (on a little-endian machine).
Not yet detected by tst_qmimedatabase which is based on shared-mime-info 1.0,
will be covered by the upgrade to 1.8 in dev.
Change-Id: I4fb7af2d367099817e712b14f2a031066d0ac432
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the loop says p <= e, no +1 should be added to e.
Testcase:
The magic for application/x-gameboy-rom says
<match type="byte" value="0x0" mask="0x80" offset="323"/>
and this code was checking both byte 323 and byte 324, finding a match
at pos 324, returning application/x-gameboy-rom erroneously.
Given the magic for application/x-gameboy-color-rom:
<match type="byte" value="0x80" mask="0x80" offset="323"/>
the expected result for game-boy-color-test.gbc is application/x-gameboy-color-rom
Not yet detected by tst_qmimedatabase which is based on shared-mime-info 1.0,
will be covered by the upgrade to 1.8.
Change-Id: I2396cb1ccfb26db5a24d5551fef493cc0b98a247
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ISO 14443-3 is for nfc communication and uses 2 different checksums.
The existing one is from ISO 3309 and the other one is from ITU-V.41.
Both are needed to implement an own transport layer defined in ISO
14443-4 to allow nfc commands with a length above 250 byte independent
from the smartphone.
This change will avoid code duplication in QNearFieldTarget.
The private function qNfcChecksum is a copy of qChecksum.
Change-Id: I790ffec8e2ea46f88b2db6f48b64fdcb140e7b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The separator character is inserted in the resulting array
after every byte and is useful for MAC address output like
01:23:45🆎cd:ef, Hash fingerprints, or low level data
debug output.
[ChangeLog][QtCore][QByteArray] Added toHex() overload to
insert a separator character between the hex bytes.
Change-Id: Ibe436094badc02f3ade7751aa8b5d690599941d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In client code I often see code like:
startTimer(1000); //ms
Let the code to be self-explaining. So provide overload
method that takes std::chrono::milliseconds as arg.
QTimer already has std::chrono support, but QObject does not.
Change-Id: Ib348612ce35f1a997b4816fe9e864775cbcbec16
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
initially, the idea was that QLibraryInfo would receive a
pre-sysrootified ExtPrefix from the builtin qt.conf. matching this
against the sysroot would then tell us whether to sysrootify the Prefix
from a "regular" qt.conf as well.
however, this would have lead to some major ugliness and inconsistency
between the code paths, so i changed my mind.
unfortunately, i failed to adjust the remaining code, leading to
169a40d51 entirely breaking sysrootification ...
the proper (and nicely consistent) solution is to introduce a
SysrootifyPrefix key to qt.conf. this is user-accessible as well, so as
a bonus it is now possible to adjust the setting at qmake installation
time. incidentally, this omission was the last thing that prevented
using the same qmake host build for any imaginable configuration of the
same qt version ... i think.
Change-Id: Ic0eebf21f93651f6374628c0ad8b206d696a4a7e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We chose to use UTF-8 as it allows us to ensure there's no mistaking the
hostname in case the locale is changed, if the host name contains
characters outside of US-ASCII.
But this didn't work because the code that wrote the hostname always
used the local 8-bit codec instead of UTF-8. On Unix, we used the
result of gethostname(3) directly, which is supposedly on the locale codec.
This commit doesn't fix Windows, which requires _wgetenv, the plan being
to encapsulate that with a qEnvironmentVariable() method.
[ChangeLog][QtCore][QLockFile] Fixed a bug that caused QLockFile not to
recognize a stale lock file if the machine's hostname contained non-US-
ASCII characters, on Unix. A Windows fix is still pending.
Task-number: QTBUG-49640
Change-Id: Ib9d045544ff370ec901626658a84ec4e6575fe21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Callers can persist a QModelIndex which was not persisted before in a
slot connected to the signal, and such a persisted index must be updated
in the course of the layoutChange.
Store the indexes to persist after emitting the signal.
Task-number: QTBUG-32981
Change-Id: Ibee4c0d84817d72603a03fe5b22fdeefeac0695e
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to the fix in the parent commit, incorrect updating of the
internal data structures during layout changes can lead to dangling
pointers being dereferenced later. Moves are treated as layoutChanges
by this proxy by forwarding to the appropriate method. However, data is
incorrectly cleared prior to that forwarding. Remove that, and let the
layoutChange handling take appropriate action.
Change-Id: Iee951e37152328a4e6a5fb8e5385c32a2fe4c0bd
Reviewed-by: David Faure <david.faure@kdab.com>
In sourceLayoutAboutToBeChanged the source model update is ignored if
the affected parents are filtered out anyway. The same logic is
attempted in the sourceLayoutChanged slot, but there the early-return
logic is applied too late - the mapping is cleared before performing the
early-return. Because pointers into the mapping are used in the
internalPointer of QModelIndexes in this class, persistent indexes used
later will segfault when attempting to dereference it.
Additionally, if a parent becomes invalid as a result of the
layoutChange, it would be filtered out by the condition in the loop,
resulting in a different result in the comparison of emptiness of the
parents container.
Fix that by persisting the parent's container, and performing the test
for early-return before clearing the mapping.
Task-number: QTBUG-47711
Task-number: QTBUG-32981
Change-Id: If45e8a1c97d39454160f52041bc9ae7e337dce97
Reviewed-by: David Faure <david.faure@kdab.com>
The process of loading a plugin is examplified by the qLoadPlugin
function (though not all users of QFactoryLoader use this function, they
all do something similar):
const int index = loader->indexOf(key);
if (index != -1) {
QObject *factoryObject = loader->instance(index);
if (FactoryInterface *factory = qobject_cast<FactoryInterface *>(factoryObject))
if (PluginInterface *result = factory->create(key, std::forward<Args>(args)...))
return result;
}
QFactoryLoader::indexOf already locked the mutex, but not
QFactoryLoader::instance. This commit fixes that.
Note that calling the virtual create() in the plugin's factory is not
protected by the mutex. Each plugin's factory must be thread-safe and
also create an object that works on any thread too. It's also the
responsibility of the caller of qLoadPlugin to ensure that it's called
thread-safely.
Task-number: QTBUG-42855
Change-Id: I63e21df51c7448bc8b5ffffd148ebee33d4c47de
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
All Apple Platforms have public API to get the environment; there is no
reason to exclude it from the UIKit subset. It can be useful for
debugging in Xcode, in particular. Furthermore, VxWorks appears to have
support for the Unix environment API, so don't exclude it either.
[ChangeLog][QtCore] QProcessEnvironment is now available on iOS, tvOS,
watchOS, and VxWorks
Change-Id: Ife3745f9b0a588de521a714b4273c5c08eeef286
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This decouples QProcess and QProcessEnvironment, since the latter may
actually be available on platforms where the former is not.
Change-Id: I3dc799ffdf94486b64143ed01a369897fff44a96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clang pre-3.4 didn't like this and it's used in Xcode 5.1 (which we need
to support for 5.8).
error: 'this' cannot be implicitly captured in this context
typename T::const_iterator i = c.begin(), e = c.end();
^
Task-number: QTBUG-57488
Change-Id: I63e21df51c7448bc8b5ffffd148e688d7c9b89d6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
After all the check makes sense here. If a timer was removed as a result
of sendEvent and it was not at the end of the list the list is not
shrunk but the timer info's id is just set to INVALID_TIMER_ID.
Additionally the timer's object should be fetched before we unlock the
locker as timerIdToObject is changed in removeTimer and we might access
a nullptr if the timer has been removed.
Reverts c83ba01f7b
Task-number: QTBUG-56756
Change-Id: Ib1a04c02fbfcf4c939b4891d42f954dc9e87149e
(cherry picked from commit 8f2088db17)
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Some public functions in QString and QDebug are declared inside
Q_COMPILER_UNICODE_STRINGS. This commit defines it for QDoc, and
adds documentation for QDebug functions that are now visible to
QDoc.
Change-Id: Ia7f2501c1dc7b8244dcc3ce4adcd2019fdbffcb6
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
g++ still warns when encountering the implementation of a deprecated
function.
Change-Id: I6a25fc8c814590e5337069f9bced0cdec97653bf
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
We can in fact delegate to QDate::toString(), contrary to the comment
that was there; we just need to insert the time in the right place,
which is easy enough to find.
Change-Id: I66624724628d45ce283243879b102ec8f741a15f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, a zone-based time would claim to be GMT, rather than
identifying its zone properly. Sadly, testing this reveals that
proprietary operating systems don't handle abbreviations ideally.
Task-number: QTBUG-57320
Task-number: QTBUG-57298
Change-Id: I8d8b7fffdbf65ac6178a65f5fc2df4d25afb1a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the time is specified relative to a zone, the ISO date produced
lacked its offset suffix; all zones were treated as if they were local
time. Handle zone as for an offset from UTC and ensure we do set the
date-time objects's offset from UTC when it's zone-based.
Change-Id: I7c9896bb8ec0a9d89df14a6e94b005174ab9e943
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "algorithm" is the same as the one for x86.
Also added a comment to qt_from_latin1 to indicate that manual
vectorization doesn't bring anything useful.
Change-Id: I6130cbd83c14c22b1bd15d726b26dbc83068b1a6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The builtins clzs and ctzs have been removed. Additionally they were
never proper internal GCC builtins and shouldn't have been used in a
constexpr function in the first place. This patch removes the assumption
that they exist when BMI is available, and let GCC fall back to using
__builtin_clz and __builtin_ctz.
Change-Id: I3e0b4e246098bb9ce6ede28b311948260ef881b9
Task-number: QTBUG-56813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE1 is going towards EOL. PCRE2 is the way forward in terms
of new features, performance, and security improvements. The
APIs that QRegularExpression uses are similar so the required
modifications aren't extensive.
The biggest difference comes to JIT-compiling of the pattern.
In PCRE1, JIT-compiling did not modify the processed PCRE pattern,
but returned a new chunk of data.
This allowed multiple threads to keep matching using the same
processed data and NULL for the JIT data, until a thread
JIT-compiled and atomically set the shared JIT data to the results
of the compilation.
In PCRE2, JIT-compiling _modifies_ the processed PCRE pattern in a
way that it's thread unsafe [1]; the results of JIT-compilation
are stored somewhere inside the processed pattern.
This means the above approach cannot work -- a thread may be
matching while another one JIT-compiles, causing a data race.
While waiting for better workarounds from upstream, employ a
read/write mutex to protect the matching from JIT-compilation.
[1] https://lists.exim.org/lurker/message/20160104.105831.3cb25b39.en.html
[ChangeLog][General] QRegularExpression now requires the PCRE2
library, at least version 10.20. Support for the PCRE1 library
has been dropped. A copy of PCRE2 is shipped with Qt and will
automatically be used on those platforms which lack it.
Change-Id: I9fe11104230a096796df2d0bdcea861acf769f57
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It probably is today, but when the I/O we're doing is explicit about
how many bytes it eats, make sure we're using an explicitly 4-byte
type, qint32.
Change-Id: I48a35fe58043368cdfd096e2628bba410d94ceaa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Europe/Samara reduced its standard offset at the same time as it
started DST in March 2010, so the transition didn't change net offset.
Our interpretation of the TZ database assumed the prior standard
offset still applied; as this was equal to the new offset with DST, it
marked the dst offset as zero, so we interpreted the next few months
as being without DST, although the TZ database marks it as with.
Generally, if a DST period has an odd DST offset, it's possible it's
due to a change to standard offset at its start. Deem the offset odd
if it's not what we last saw (or, on the first DST, not an hour); in
that case, check the DST period's end, to see if it offers a less odd
DST offset. Positive DST offsets are less odd than zero or negative;
otherwise, expect what we saw last, one hour is not odd and closer to
what we saw last is less odd than further from it. This suffices to
fix Samara in 2010, at least.
Task-number: QTBUG-56345
Change-Id: I9f0ee4e9cd6901c28a8ec1558aec5d26a21152f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such mappings are ill-defined in the presence of daylight-savings time
(DST); at its transitions, you need information about whether DST is
active or not to determine the correct UTC value. Existing code did
not have a way to be told that hint, so could not be correct.
Fixing this required changing the (thankfully private) APIs by which
QDateTime accessed QTimeZone's information stipulated by zone time.
In QDateTime, this required propagating the needed hint, when DST
status was known.
QAndroidTimeZonePrivate overloaded QTimeZonePrivate::dataForLocalTime
with an implementation that works whenever !hasTransitions(); the base
implementation handled this case lamely, so I've moved the Android
implementation there, to have only one place for both re-writes.
Amended tst_QDateTime's expected failures; passing a date and time to
the constructor *is* ambiguous when the moment indicated is in a
transition. I have changed which way we resolve that ambiguity.
Added round-trip test of QDateTime's fromMSecs/toMSecs (but as a
QTimeZone test, since that's what's actually getting tested), based on
a test-case from Marko Kangas. Initially failed for various zones,
each at one hour-offset; and, on some platforms, for some zones, at
all offsets. These last revealed that a platform may claim to have
zone information yet, for some zones, lack it (or have very incomplete
information). In each case, despite this, the platform does give
offsetFromUtc(). (The test also found another pre-existing bug on
Linux; fixed in an earlier commit.)
To accommodate these gaps in transition data, the transition-based
code now falls back to the offsetFromUtc()-based code (used when there
are no transitions) if it can't find a previous transition (which, in
any case, it needs to do its job).
Task-number: QTBUG-56460
Task-number: QTBUG-56397
Task-number: QTBUG-52284
Change-Id: I2f7422a9e9d3767940b1901d887c6a2c1f36ac9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reinterpret_cast()ing a pointer to a suitably sized integer is not guaranteed
to always give the same result for the same pointer (!). Therefore the
resulting integers are not comparable in a meaningful way. std::less is
supposed to be used to compare arbitrary pointers, so use it.
(Hopefully and reasonably, under the hood std::less does exactly what we
were doing, so this isn't BiC.)
Change-Id: I9960b3d6e35657fe7a25b842054f5d338280e850
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a bool *ok out parameter to qt_normalizePathSegments() and return false
when ".." are left over for an absolute path, indicating an attempt to
change above root.
Factor out static helper qt_cleanPath() to be able to pass the return value
to QDir::cd() and return on failure from there.
Amends change 63f634322b, which did
not handle UNC paths.
Task-number: QTBUG-53712
Change-Id: I3e63a5dd0259306a0b99145348d815899582f78e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling QDir::cleanPath() on "//server/path/.." resulted in "/".
Factor out a function to determine the root path part of an absolute
path for later use, and handle some special cases:
- Consider server name of "//server/path/.." as part of the prefix.
- Check on the root path for WinRT.
Task-number: QTBUG-53712
Change-Id: Ibddacf06212b6fc86fa74a5e4078df6cfd5b66f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit c35fef9d3b wasn't sufficient. The
problem is that there's a complex combination of libc headers (math.h),
C++ headers (cmath), which may be provided by three different sources on
Linux (glibc, gcc and ICC). On some combinations, the isnan macro leaks
from math.h or cmath and that's what the the commit above tried to fix.
On some other combinations, there's no macro but there's an ::isnan
function defined. When we do "using namespace std; return isnan(x);",
that causes a compilation error. This commit solves that by detecting
whether there is a macro defined.
error: more than one instance of overloaded function "isnan" matches the argument list
function "isnan(double)"
function "std::isnan(double)"
argument types are: (double)
Change-Id: Iaeecaffe26af4535b416fffd148bf71826541bdd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Namely: decltype(). Ideally we'd want C++17's template constructor
argument deduction, but instead use the C++11 solution: a factory
function. This enables using things such as lambdas in the container
argument.
Change-Id: Idba64d8069d15bbafe54cfdebe24b1fba1eb8d0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The C++ standard says in [support.initlist.access]/1:
constexpr const E* begin() const noexcept;
Returns: A pointer to the beginning of the array. If size() == 0 the
values of begin() and end() are unspecified but they shall be
identical.
So we can't assume it's non-null. I didn't want to remove the Q_ASSERT,
so passing a non-null pointer to append() remains required. This patch
simply won't call append() if the initializer list is empty.
This was already tested, but the failure is with a compiler that is not
part of the Qt CI.
Task-number: QTBUG-57277
Change-Id: Iaeecaffe26af4535b416fffd1489806872b412ee
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We now have qtHookData, which is a better (and cheaper) way to add hooks
for object creation and deletion. For binary-compatibility reasons we
cannot remove it in Qt5.
Change-Id: Iecd9f4e1195f90279c395845fa26c6301b67b9a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Other methods that call this method check for errorMessage to be
nullptr, so better check here, too.
Change-Id: I8cf4e9d4f5eaafcfc8309dc351ae3b7027c40a98
Reviewed-by: David Faure <david.faure@kdab.com>
Provide appropriate alternative documentation where applicable.
Change-Id: I73d810938bb961a74d06d8cedb05c38675363ef0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds documentation for QOperatingSystemVersion::OSType and cleans
up some extraneous quotes.
Change-Id: Idaeb163caded9a51ce0fbcc812eb622b4227844e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_COMPILER_REF_QUALIFIERS is not yet supported
on all platforms, so clangqdoc must ignore
functions that are defined only when it is
defined. This change adds && !defined(Q_CLANG_QDOC)
to some #if defined(Q_COMPILER_REF_QUALIFIERS) tests
to allow clangqdoc to use old declarations.
Note that Q_CLANG_QDOC should also be used instead
of Q_QDOC from now on, so that we know that uses
of Q_QDOC have been examined to see if they are
still required for clangqdoc.
Change-Id: I910be70df63eca09985728c7b9eba473aed141ba
Reviewed-by: Martin Smith <martin.smith@qt.io>
Some declarations in QProcess are declared only
for Windows. This change uses the Q_CLANG_QDOC
macro so that #if defined(Q_OS_WIN) becomes
This ensures that Windows-specific documentation
always gets generated. The macro is added in
both .h and .cpp files.
Change-Id: I632fc52d010cd7c0399fd191f44cbacf6ed25aff
Reviewed-by: Martin Smith <martin.smith@qt.io>
Duplicate qdoc comments removed for setPreciseRemainingTime(),
remainingTime(), and deadline(). Added qdoc comments for swap(),
and two new assignment operators. Also added a few parameter names.
Change-Id: I5c19ca3bdef876019c5742397249ea9e0c066bf3
Reviewed-by: Martin Smith <martin.smith@qt.io>
That's what happens when you don't test and just rely on an the warning
listing. ICC has two warning numbers for deprecated warnings: one that
matches Q_DECL_DEPRECATED and one for Q_DECL_DEPRECATED_X.
Change-Id: I73fa1e59a4844c43a109fffd148ca7a05eda8f13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's a bit large for an inline function.
Note for Qt 6 that this function is nonsense.
Change-Id: If6af5d3538aac86d55313ba6accdb13f892e6564
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Do not create QByteArray from const char* to compare with other
QByteArray, because there is an overloaded operator==.
So avoid needless allocations.
Reorder condition, because isEmpty() method is cheaper than
string compare.
Change-Id: I8d2c8a0fb247528d9ce485007431167372d62bff
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And get rid of related DEFINES in the pri file
Change-Id: I54cf25b7cb447af22b410213759044e8018939a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
After all the check makes sense here. If a timer was removed as a result
of sendEvent and it was not at the end of the list the list is not
shrunk but the timer info's id is just set to INVALID_TIMER_ID.
Additionally the timer's object should be fetched before we unlock the
locker as timerIdToObject is changed in removeTimer and we might access
a nullptr if the timer has been removed.
Reverts c83ba01f7b
Task-number: QTBUG-56756
Change-Id: Ib1a04c02fbfcf4c939b4891d42f954dc9e87149e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Turn them into proper private features, and remove setting of
defines in the pri file.
Change-Id: Iafc11e93d4a9349bf15971dc1adac9a828ea03f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... if sync() has already been called manually.
Change-Id: I11bd6810aa3c1065a72ffaa2001d1bdbf8bf9c89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add parentheses after function names, replace
is different -> differs
Change-Id: I6332db1d1650ed8d8320c5f20cd79d0bf1870e27
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
As _BitScanForward and friends are not marked constexpr in Visual Studio,
functions using these may not be marked either.
Task-number: QTBUG-57086
Change-Id: I29cfa4459580b5740f1011e7f39309844518ce03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This is the only warning we disable in a lot of places in Qt 5.8 source
code. If other warnings become common, we can add macros for them too.
Change-Id: Iaeecaffe26af4535b416fffd1489d1968e29c52a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The user can call qSetMessagePattern after program start, so we need to
be sure that the parsed argument data is properly cleared.
Task-number: QTBUG-57144
Change-Id: I1978c6b95bd84639a8c4fffd1487429b04725522
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Qt5Config restricts search paths of Qt components to ${_qt5_install_prefix}
to prevent accidentally using system Qt modules in case of restricted Qt
configuration. However this does not work properly when Qt is used without
installation, in particular when building cmake-based QtWebKit as a Qt
submodule, because ${_qt5_install_prefix} resolves to QtBase and does not
contain components from other modules.
This patch changes search path from ${_qt5_install_prefix} to all qt5
subdirectories.
Change-Id: Icf01a256097710889573ad69d847b9c3bffa1449
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Liang Qi
Thiago Macieira
Jake Petroules
Allan Sandfeld Jensen
Alexander Volkov
Erik Verbruggen
Alex Trotsenko
Tasuku Suzuki
Friedemann Kleint
Samuel Gaist
Jesus Fernandez
Dmitry Shachnev
Kimmo Ollila
Sebastian Lösch
Marc Mutz
Giuseppe D'Angelo
Maurice Kalinowski
Kavindra Palaraja
Paul Olav Tvete
Edward Welbourne
Jason Erb
Rafael Roquetto
Ulf Hermann
James McDonnell
Elvis Angelaccio
Martin Smith
Oswald Buddenhagen
Simon Hausmann
Aleksey Lysenko
Jędrzej Nowacki
Frederik Schwarzer
David Faure
Daniel Vrátil
Lars Schmertmann
Andre Hartmann
Anton Kudryavtsev
Stephen Kelly
Oliver Wolff
Topi Reinio
Allan Sandfeld Jensen
Tobias Hunger
Anton Kudryavtsev
Lars Knoll
Albert Astals Cid
Konstantin Tokarev
Orgad Shaneh