Qt for Python users reading the documentation assume that int(0) can
be passed for pointer parameters. Use the newly introduced \nullptr to
disambiguate this.
In a follow-up step, the \nullptr macro can be defined as None
when generating the Qt for Python documentation.
Task-number: PYSIDE-903
Change-Id: I3a45f87175a0668ab5f3f95f0aff409f7e3ef027
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Christian Tismer <tismer@stackless.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The wording was quite confusing and misleading - if not set exlicitly,
QNetworkRequest::sslConfiguration() will initialize configuration to
be equivalent of QSslConfiguration::defaultConfiguration(), not what
the documentation stated.
Task-number: QTBUG-13418
Change-Id: Id578db47ec75031376f73db42108053655fbf5c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Need to do the same for startsWith() and endsWith(). indexOf() is a lot
harder.
[ChangeLog][QtCore][QByteArray] Added compare(), which takes
Qt::CaseSensitivity as one of the parameters. This function is more
efficient than using toLower() or toUpper() and then comparing.
Change-Id: Ib48364abee9f464c96c6fffd152e69bde4194df7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QNetworkRequest is already aware of the Last-Modified header but
has been lacking support for the If-Modified-Since, ETag, If-Match
and If-None-Match headers. These headers are used with HTTP to
signal conditional download requests.
See RFC 7232 for more information.
Change-Id: I248577b28e875fafd3e4c44fb31e8d712b6c14f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It did not make it into 5.10 as far as I can tell.
Change-Id: I01f950c476f2c98f4ed40d2cafd15ecc112a3427
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Often requested feature in QtWebKit is reporting what kind of resource
corresponds to particular QNetworkRequest, similarly to
QWebEngineUrlRequestInfo::resourceType(). This information can be used
to modify or block certain request types in user's implementation of
QNAM::createRequest().
The only clean way to pass this data is via attributes of QNetworkRequest,
so enum value needs to be reserved. It's unlikely to be used anywhere
outside of QtWebKit, however this is already the case for
SynchronousRequestAttribute.
Change-Id: I51a258e5e4b78e6e823c30c48d0c644356de6b17
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Now that we have a proper ALPN/NPN + Protocol Upgrade, we can also
add H2Direct - this can be useful for our users that have to work
with either Secure Transport or a TLS implementation not supporting
ALPN/NPN and with 'h2direct' servers in case they have prior knowledge
of HTTP/2 support. The difference with RFC 7540 is the fact we also
allow this 'direct' in case of 'https' scheme (it appears existing
HTTP/2 server implementations support such mode too).
[ChangeLog][QtNetwork] Add Http2DirectAttribute to enable 'direct' HTTP/2
protocol without ALPN/NPN and without protocol upgrade negotiations.
Task-number: QTBUG-61397
Change-Id: I0499d33ec45dede765890059fd9542dab236bd5d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously we were always setting SpdyWasUsedAttribute for SPDY/HTTP/2/HTTP/1.1
(true/false) which is confusing. Now if HTTP2AllowedAttribute was set to true on
a request, we set HTTP2WasUsedAttribute. Otherwise, as we did before, we're setting
SpdyWasUsedAttribute.
Change-Id: I0c44cfb5469fef0c12719baa951197ee2accee4a
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With this new policy, after emitting 'redirected', QNetworkReplyHttpImpl
waits for client code to decide if QNAM should follow this redirect or
not. The client can either allow this redirect by emitting 'redirectAllowed'
or abort the reply.
Task-number: QTPM-236
Change-Id: Ia04619f6bd1f0caa477833ae859b24033027b2e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch makes it possible to enable/disable redirects on QNAM
level (before it was per-request only). This policy would be applied
to all subsequent requests* created by QNAM.
The policies we support at the moment:
a. Manual - that's what we always had - it's up to a user to handle
redirects.
b. NoLessSafeRedirectsPolicy - we allow http->http, http->https and
https->https redirects, but no protocol 'downgrade' (no
https->http redirects).
c. SameOriginPolicy - we check that protocol/host/port are
the same.
Updated tst_qnetworkreply.
*We previously were enabling redirect for each request, by
setting FollowRedirectsAttribute on QNetworkRequest object.
For backward compatibility this attribute has a higher priority
(if set) than QNAM's policy (and it will work as NoLessSafeRedirectsPolicy).
[ChangeLog][QtNetwork] Added redirects policy to QNAM
Task-number: QTPM-239
Task-number: QTPM-237
Change-Id: I493d1728254b71b61b5504937e8e01dca5953527
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We are removing the Content-Length header from our QNetworkReply
headers from a compressed HTTP reply.
A new attribute is added to have access to the original length.
Task-number: QTBUG-41840
Change-Id: I4e885e422d4203d63460d49c0eb5f11022003578
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: I47c5308a6ad220b4c5495e55a3b0d38547bfa8d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... (or trivially marked const) local variables or
parameters, by replacing them with C++11 range-for
loops.
Also ported one indexed loop.
Change-Id: Idddcac48ce7527b1ea674671ceb9aaf4d31fb42e
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The text for RedirectionTargetAttribute said the app has to handle redirections,
and only said that this attribute wouldn't be set if FollowRedirectsAttribute is set,
which was a bit confusing to read, before reading what exactly FollowRedirectsAttribute does.
It does more than removing the other attribute, it actually follows the redirection...
Change-Id: Idc634996e7b521ba05c05ca52438e47f1a411c85
Reviewed-by: Mandeep Sandhu <mandeepsandhu.chd@gmail.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
These were missed in d815de8c26 which
originally added these values.
Change-Id: I69618c90e71f7cc01eef3db477427759e62f626b
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Mandeep Sandhu <mandeepsandhu.chd@gmail.com>
Found by UBSan:
qnetworkrequest.cpp:1016:19: runtime error: load of value 4294967295, which is not a valid value for type 'KnownHeaders'
KnownHeaders does not contain a failure state, and no negative
values. -1 is therefore not a valid value for an object of type
KnownHeaders, so loading one is considered UB.
Fix by returning the result of parseHeaderName() as an int,
only casting to KnownHeaders after checking for the failure
case.
Change-Id: I6b165fe2b15c747344a9b2750bb753582c5bcbeb
Reviewed-by: Richard J. Moore <rich@kde.org>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: I91053ddb58639615e8864e5be20861e7cceb815e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This commit adds support for following HTTP redirect responses on a per
request basis.
This behavior is disabled by default. It can be switched on by
setting the QNetworkRequest::FollowRedirectAttribute to true.
2 new error codes have been added to QNetworkReply:
* TooManyRedirectsError: Set when the number of redirects exceed a
given value set by the user (defaults to 50 if not set)
* UnsecureRedirectError: Set when we are redirecting from a 'https'
to 'http' protocol.
Test cases for the following scenarios:
* Single HTTP redirect using local test server
* Changing max-redirects
* Testing all redirect related error scenarios
The next commit will extend this feature at a QNAM level.
Task-number: QTBUG-8232
Change-Id: If9e28ad12bad08bcdc5bc511b1cd59dc9d8150f0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
... so that a user can have more fine-grained uploadProgress signal
emissions if desired.
Change-Id: I9f77fd80c100dbe249beaf3057e6e8974680ec59
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Change-Id: I213ac1fb2733e675f3641441fe6c621bab06c1f0
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
Default values should have mark-up to denote that they are code.
This commit changes:
-"property is true" to "property is \c true".
-"Returns true" to "Returns \c true".
-"property is false" to "property is \c false".
-"returns true" to "returns \c true".
-"returns false" to "returns \c false".
src/3rdparty and non-documentation instances were ignored.
Task-number: QTBUG-33360
Change-Id: Ie87eaa57af947caa1230602b61c5c46292a4cf4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
... because otherwise this would crash.
Apparently there are cases where the header name is empty.
Task-number: QTBUG-31667
Change-Id: I31b3e964502c05b7614c23876bb3752fa75ab22d
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Use an include guard in headers to ensure the header is not included
more than once. Make the header guard match its file name.
Also, cpp files should include their own headers first (but below config.h)
Change-Id: Iecf5da23c0f8e6d457f67657b88ef7557bde9669
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling a static function non statically causes an unused variable
warning for the optimised away d pointer.
sscanf causes an insecure functions warning. (Even though it was used
safely in this case)
Change-Id: I07700e2155284ef3ebbe7d604ed59b2e61ee7f95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This change moves the snippets and imagesto the modularized directories.
Change-Id: If14912692a7f72d7de345eaf88d9ec9752310fca
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This is so that the ConnectInBackground flag can be set on the
QNetworkSession internal to QNAM according to pending requests.
Change-Id: If0cc62f5117ed8febbbda7b7f6de62b11b274258
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
-Some of the public classes were missing the \inmodule command.
-Fixed a sentence.
Change-Id: I88ebe12680c744e32253dc01c5ddb4292267caf9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Friedemann Kleint
Liang Qi
Edward Welbourne
Timur Pocheptsov
Thiago Macieira
Andy Shaw
Jan Murawski
Allan Sandfeld Jensen
Konstantin Tokarev
Jesus Fernandez
Timur Pocheptsov
Marc Mutz
Liang Qi
David Faure
Jake Petroules
Anton Kudryavtsev
Jani Heikkinen
Sérgio Martins
Mandeep Sandhu
Peter Hartmann
Matti Paaso
Kurt Pattyn
Jerome Pasion
Sze Howe Koh
Sergio Ahumada
Giuseppe D'Angelo
Samuel Rødal
Iikka Eklund
Sergio Ahumada
Stephen Kelly
Shane Kearns
Casper van Donderen
Michalina Ziemba