The firebird api expects the timestamp (ISC_TIMESTAMP_TZ) of a timestamp with time zone is provided in UTC.
Pick-to: 6.7
Task-number: QTBUG-128493
Change-Id: Iacc85ca1141407f5ab73fd0198c7b2db770bf589
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Johann Anhofer <johann.anhofer@meon-medical.com>
(cherry picked from commit 8d8805214df22bf8dccbb30c9ca4a9953f3a1068)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We were overwriting the normalization if RemoveFilename was used.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::toString(),
QUrl::toEncoded() and QUrl::adjusted() to ignore
QUrl::NormalizePathSegments if QUrl::RemoveFilename was set.
Fixes: QTBUG-127711
Pick-to: 6.7 6.5 6.2 5.15
Change-Id: I8a96935cf6c742259c9dfffd17e8e1f7fec44cb6
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
(cherry picked from commit c9ff625865c355fb57c824b13f3cb4b26e53fbe7)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When the relationModel is updated (e.g. a new row is added or removed),
the internal relation cache needs a refresh to reflect those changes.
Fixes: QTBUG-128434
Change-Id: Ie388c01d545564ad7b1424d70267166ac1e4bfd6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
(cherry picked from commit 48753a03de7c9c394fbf4cf69e2c2f3d1048c85f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
That allows the code to run in C++17 mode - at the expense of
significantly worse compile time error messages, potentially worse
compilation speed and harder to read code.
Adjust the test type to actually model
detail::is_equality_comparable_with (which requires all four
relational operators even in C++17).
As a drive-by, fix the return value of remove() from auto to bool.
Done-with: Marc Mutz <marc.mutz@qt.io>
Fixes: QTBUG-128470
Change-Id: I68df26db579c60812a18e09b76dd5712e73ccaa2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7fe3cee36352c74cbaaff52e863bd0da1170affa)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Going from 40 seconds to 1.
The issue is that wait() doesn't care if there was
a signal emitted already, it will just wait 5 seconds for a new
one. But we don't care, we just want to know that there was 1.
Pick-to: 6.7 6.5
Change-Id: I96f1f00bc6171ccc6e5b2f033fa407de5cf0c0c3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 65494fbd3dff16d4476b5ac8c04df830d9fd61e6)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
On some platforms, localhost resolves to both ipv4 and ipv6 addresses.
In that case we might get multiple emissions of the
socketStartedConnecting signal, for Happy Eyeballs.
Pick-to: 6.7 6.5
Change-Id: Ib39a167bdde2089106c89a3e297cbb0ad2f357d9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 13a0f294b5ef2ec8a2057d72365f989ddf6290de)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
tst_qfloat16::ordering tests that qfloat16 can be compared with a long
double. When on x86_64, conversion from qfloat16 to long double leads to
a linker error due to undefined reference to __extendhfxf2. This is a
bug in the VxWorks' toolchain. It has been acknowledged by WindRiver and
it's being tracked in ticket 00154117.
Since
- this is a platform problem and Qt has no control over it,
- the conversion won't work for any client code anyway, so not testing it
is not hiding any issues,
mitigate the problem for now by not compiling the problematic test code
on VxWorks.
Task-number: QTBUG-115777
Change-Id: Icf81da405d1392ae3bcacc61745a54d68b849b89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 6ef631c7992cc81ead158c5c5801f689b21fc378)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Fixes a build problem on VxWorks because their runtime library isn't
libgcc.a and is thus missing the symbols that the Clang emits into the
test code when the intrinsic is used. This also better aligns the CPU
check with what QtCore does.
Drive-by add a comment explaining what this is and why Darwin is
excluded.
Drive-by clean up of the CMakeLists.txt, especially the no-ops.
Task-number: QTBUG-115777
Change-Id: Ib15e33ce157f7e6d99d0530076de6a1024733ed6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 5f522947878690bf7b99ff4b39a6cbaa259b74b1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Follow the dynamicCast/dynamic_pointer_cast implementation for
objectCast/object_pointer_cast since a qobject_cast can fail
just like a dynamic dast.
Also see: https://eel.is/c++draft/util.smartptr.shared.cast#6.2
See commit this commit from 2013 for more historical context:
a094bf5a89
Pick-to: 6.7 6.5
Change-Id: I9a54af55a7a1cf106cace52e9cf3bc103ae0bd42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7a65abb50eb638de445e24c2746d7f90c1b89f06)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We do have an implicit constructor which allows construction of a
QLocale from the QLocale::Language enum values. It will be used when
doing the comparison.
However, do not rely on the implicit conversions, and provide the
operators that explicitly do the right thing. This also allows us to
save an extra allocation of QLocalePrivate.
Found in Qt 6.8 API review.
Amends 71bbc35a37.
As a drive-by: fix the order of the test slots in the unit test.
Change-Id: I37f8f5881469b7734705e06e471746814dd2ddf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 403b1abcad5f437c51dfabd7095b814e99e197a1)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This simplifies the implementation, and is more secure, because you no
longer can compare const_iterator with const_iterator and get a
non-sensical result (unequal, even though copies of each other).
Requires the STL algorithm test to be ported to C++20 ranges, because
classical STL algorithms can't deal with decltype(first) !=
decltype(last).
Found in API-review.
As a drive-by, make the reversed and inverted operators conditional on
!__cpp_impl_three_way_comparison.
Change-Id: Icd0e4dac277bd3b053f7b648f8c3f9d9f3753299
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
(cherry picked from commit 2569ca0f34fe15a2e5c828b708f1406be8d53836)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
This reverts commit 521e091bca1764d53ac06bb60707475d1032f5d5.
Reason for revert: The fix doesn't work with MSVC2022 compiler and block windows-11_23H2-msvc2022-developer-build integration. Need time to find proper solution.
Task-number: QTBUG-128498
Change-Id: Id938fa2119c7e4c053398b2a3693f3128e53f734
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 1017a0eaf1f9fd9cc37189f73840d85bf4a5664c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Make sure this works as it should. The bug report/support request wants
to have a String[] parameter on the Java side, but then the C++ side can
not use jobjectArray (as that has "[Ljava/lang/Object;" as signature),
so use Object[] instead (which is one solution; the other is to use
QList<jstring> or (in 6.8) QStringList on the C++ side.
What's easy to miss is that the jobjectArray that we get is a local ref,
so we have to extend its lifetime by creating a QJniObject holding it as
a global reference. We can then create a QJniArray from that QJniObject
(without any type safety).
Task-number: QTBUG-128456
Change-Id: I1e03b811165f9bc5106324d39fb58114ee8cf398
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Petri Virkkunen <petri.virkkunen@qt.io>
(cherry picked from commit f9fd5870f7379103005839bc03543bb8f6da94c3)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Container::max_size() is a _non-static_ member function in the STL, so
we can't call it as C::max_size(). Instead, use the newly-added,
Qt-style camel-case maxSize(), which we will keep static constexpr.
Task-number: QTBUG-128450
Change-Id: I839df90a91cced85f000c7d2744ba547f629ed98
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 6c15f99853c4cecd9285e189a441392a397b0f82)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
They match what QTimer already provides these days, and we want to
minimize porting for users come Qt 7, so we don't want users to first
write QChronoTimer::singleShot() (because it exists) and then back to
QTimer::singleShot(); we want them to continue to use QTimer.
The only reason QChronoTimer is a separate class from QTimer is that
the latter has an int interval property and we can't just port it to
milli- or nanoseconds chrono types if we want users to actually access
the extra range or precision afforded by the chrono types. But that's
not an issue for the singleShot() static methods, as they never return
an object that could be asked for its timeout.
(No ChangeLog needed, as QChronoTimer is new in 6.8)
Found in API-review.
Fixes: QTBUG-128426
Change-Id: Ief8b7c8d25380c0e9e9c5c36c90ce34c147557ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 6e5eb082c934cb94c45f3e13b3f7c2deb2e7b2e6)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Add the tests for the (move-)constructors and move-assignment.
Change-Id: I795a314a0e6d1795006fe152397eb6d9eeb3c712
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
(cherry picked from commit b6466275c27f9ec4ec8b09641e203f7afef3f7e5)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
All the actual code of the module was subject to #ifndef QT_NO_DOM,
aside from the *_p.h that were only included subject to such #if-ery,
so there's nothing left of the module if the feature is ever disabled,
but be consistent with the module defining a feature that allows that.
Convert #ifndef QT_NO_DOM to #if QT_CONFIG(dom) (and move to outside
the namespace, where nothing was inside without the define), require
feature dom in the *_p.h and test, change CMake config to skip the
test when the feature is disabled (and add a missing SPDX comment),
condition including sources on the feature.
Pick-to: 6.7 6.5
Task-number: QTBUG-122619
Change-Id: Ie2167b6c56d96c7804785e225f3fe02dbc78984c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit a4c85a5cf19d8919797aba41077bfa8796427f54)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Implemented the virtual method moveRows to allow row movement.
Used it for the case of sorted insertion.
Heavily based on QListModel::moveRows and its unittest.
[ChangeLog][QtWidgets][QTableWidget] Implemented moveRows in model.
When sorting is enabled, setItem() now moves the row to its
sorted position, emitting rowsMoved rather than layoutChanged.
Task-number: QTBUG-69807
Change-Id: I62a150cca4e5b7d982f2359a6d8c248494528cac
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
(cherry picked from commit f951c11586081efea108ea5b6a7028c672e12c2a)
This patch updates the tika-mimetypes.xml MIME types definition file to
version 5ea8bbf1644a593ed22ee5c7608ba33aff949d5d, which is currently the
latest on main.
The reason for the change is to include audio/aac as an alias for the
deprecated audio/x-aac MIME type, which is useful in QtMultimedia to
determine the file extension for AAC media files.
In addition, the update adds the application/x-java-keystore MIME type,
similar to the one in the old freedesktop.org.xml MIME type definition.
[ChangeLog][Third-Party Code] Updated TIKA MIME types definition file to
add the audio/aac and application/x-java-keystore MIME types.
Pick-to: 6.7 6.5
Change-Id: I14fa331c5c57e4fae8f8b31880dc66d6ca559f62
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
(cherry picked from commit 5774aa2560b65a67e72f98cf2f776325b6760950)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Methods with preconditions can't be noexcept (from Marc in code
review).
[ChangeLog][QtCore][String Views] Added slice() methods to
Q{String,ByteArray,Latin1String,Utf8String,AnyString}View which work
like sliced() but modify the view they are called on.
Found in API review.
Task-number: QTBUG-99218
Change-Id: Ic8ef3085f7cfac86b8404fb28d491ca38ad121eb
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
(cherry picked from commit 8f68bd9e6353a42d3b71d893b27fec6bedced501)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
If a window is positioned with setFramePosition, we reflect that to
the platform window via QPlatformWindow::setGeometry(), but with the
QWindowPrivate::positionPolicy set to WindowFrameInclusive. On the
platform side the position policy is read from QWindowPrivate to
determine how to interpret the incoming geometry.
When the resulting geometry is applied to the native window,
it's reflected through QPlatformWindow::geometry() and reported
back via QWSI::handleGeometryChange() as client geometry, ie.
without the frame margins.
If the platform layer later interprets this geometry in
combination with the window's positionPolicy, it will incorrectly
position the frame top left at the point of the client geometry's
top left.
It would make sense to reset the window's positionPolicy at
the point of QGuiApplicationPrivate::processGeometryChangeEvent,
but doing so might break situations where there's another in
flight geometry request.
What we can do as a first step is reset the positionPolicy when
the platform window is destroyed. This ensures that the next
time the platform window is created it will be placed at the
same position, even if the initial position was requested via
the setFramePosition() API.
Change-Id: Ic555f19884ccd68c46421d0fe666717170ba7638
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 11a09a9bd0a7e899a918b078a94c6c3b82240dee)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When QFileDialog::HideNameFilterDetails is set, the combobox does not
show the complete filter but only the filter name. Therefore we can't
use the value from QComboBox::currentText() when returning the current
selectedNameFilter()
Fixes: QTBUG-127924
Change-Id: I8feb894e5336f2899b42d798558a3c9380669938
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 92e650832d425944037ad6ad3c1d46667f62f454)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The check to see if m_itemView is empty is already
included in the first condition, and the re-check in
the second condition is unnecessary.
eg: A | | (!A && B) is equivalent to A | | B.
Change-Id: I1a9f003bacea076fc1e72765c196a327a21c33b2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
(cherry picked from commit 063dad967fbea9649683aa02f457c839e1ab56cb)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When isValid is true, it must be true; when isValidis false,
whether the conditional judgment is true ornot only depends
on whether !result is true(eg: A | | (!A && B) is equivalent to A | | B.),
so you can optimize the judgment condition to improve thereadability
of the code.
Change-Id: I0231b83e0b50586dff2820b8d0dfc35edec36f70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 03c547f1010868a0ef2f236c6980094efab7e12f)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When isValid is true, it must be true; when isValid
is false, whether the conditional judgment is true or
not only depends on whether !result is true
(eg: A | | (!A && B) is equivalent to A | | B.),
so you can optimize the judgment condition to improve the
readability of the code.
Change-Id: Iab621d3d2948d249f6d8a2425bca3f5404c2e1a1
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
(cherry picked from commit 3819ad4ea42b707e7b786b3a8b942d1214533ba6)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Raised in 6.8 API change review. The use of "matches" in a name suggests
pattern-matching, which isn't what happens here.
Task-number: QTBUG-125859
Change-Id: I8aa05b117807b9d1b9b737cd63d44fb4a30f6fa5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 6b36e5de7656e1d9e23364c596cc82f8068d4452)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Complements ab05e05f60253b9be615c09aa340ee75f2e5bcaf:
Strings: get rid of the last std::char_traits use
LLVM's libc++ became pedantic and insists on only accepting
instantiations for one of the standard Char types, so remove all uses of
it with a template parameter.
Complements dc2ae08e02.
which is:
QStringView: stop instantiating std::char_traits<QChar> and <uchar>
It's deprecated and will be removed with LLVM 19.
Amends b1ee49b465.
Fixes: QTBUG-128325
Task-number: QTBUG-126214
Task-number: QTBUG-122753
Pick-to: 6.7
Change-Id: I2c7fbe3c0f557e98e7edfffdb00b4cc71a6612ca
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
(cherry picked from commit b387537d3e9c35d9f112d4aa32ad71df5e5e9028)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
By using {QString,QByteArray}::begin() instead of data() (for const
objectst); both begin() methods, respectively [1], return nullptr for a
const null {QString,QByteArray}. Whereas data() returns &_empty if
QT5_NULL_STRINGS is defined.
[1] QByteArray::begin() since a116b2ddfc
QString::begin() since 287ace562e
[ChangeLog][QtCore][QLatin1StringView] Creation of QLatin1StringView
from QByteArray or QByteArrayView now preserves the origin's isNull()
status. This matches the behavior of creating a QUtf8StringView from
those types.
Change-Id: Icbdfe282e315c08ca6a17201bcd32c1a3bba8bf5
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
(cherry picked from commit 221d8fdfb14c16472267320f859105f1a3834952)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
- Added missing conversion from Qt::strong_ordering to
std::weak_ordering, std::partial_ordering.
- Added missing conversion from Qt::weak_ordering to
std::partial_ordering.
Usage of Q_IMPLICIT specifier in new std::*_ordering conversion functions leads to following ambiguity errors on WIN + MSVC configuration:
C:/Users/qt/work/qt/qtbase/src/corelib/global/qcompare.h(334): error C2440:
'static_cast': cannot convert from 'Qt::weak_ordering' to 'Qt::partial_ordering'
qcompare.h(334): note: 'Qt::partial_ordering::partial_ordering': ambiguous call to overloaded function
qcompare.h(249): note: could be 'Qt::partial_ordering::partial_ordering(Qt::partial_ordering &&)'
qcompare.h(153): note: or 'Qt::partial_ordering::partial_ordering(std::partial_ordering) noexcept'
qcompare.h(334): note: while trying to match the argument list '(Qt::weak_ordering)'
For solving the problem we can exclude the conversion function from the argument list(make it explicit in case of MSVC).
Q_COMPARE_CAST_IMPLICIT is used for setting explicit or implicit specifier depending on the compiler type
[ChangeLog][QtCore][QtCompare] Added missing conversions
from Qt ordering types to std ordering types.
Fixes: QTBUG-127670
Pick-to: 6.7
Change-Id: I32a9a33fa8921c75b0e5a40bd413572f1bd6765a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 521e091bca1764d53ac06bb60707475d1032f5d5)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
C++26 adds std::saturate_cast, so follow the established pattern of
other similar "backported" APIs. The old name is left around while
we port other submodules.
While at it, move qt_saturate's tests to the qnumeric test.
Change-Id: I653a2e3d936081378298a9c8e51e7c1a2d438d83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7447ad503330ed176cf369792ffb33b7e00a58d3)
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The way QMainWindow handles dock widget separators is a bit evil. They
are real QWidgets, added as direct children of the QMainWindow, but
painting and mouse interaction is handled by a hook into the QMainWindow
events, via QMainWindowLayoutSeparatorHelper::windowEvent(), which
is called at the start of QMainWindow::event().
For reasons unknown, we also raise() these separator widgets, which
means they are always at the top of the child window stack of the main
window. This is problematic for the situation when a QToolBar has an
expanded overflow-menu, which is also raised(), but where we end up
raising the separators on top of the toolbar again. As a result the
toolbar gets leave events when we hover one of the separators, even
if the toolbar menu is overlaid the dock area, resulting in the menu
closing.
We don't see this visually, as the separators are drawn via the hook
mentioned above, which happens before QMainWindow draws any of its
child widgets, like the toolbar.
Fixing this requires us to selectively place the separators below
any expanded toolbar each time we raise a separator, so that we
respect the request of the toolbar to be on top, while still
ensuring that the separators are above any of the dock widgets.
Unfortunately the QMainWindowLayoutSeparatorHelper hook also
processes mouse move and click events, resulting in the cursor
changing shape when hovering the separator, even if the toolbar
menu is over it.
To fix this we amend the logic of finding a separator widget
based on the mouse event position to also querying the QWidget
childAt() function, and if we are over a tool bar, we bail out
instead of looking for a separator on that position in the dock
area layout.
As the special separator logic in QMainWindow is conditioned on
the style returning 1 for QStyle::PM_DockWidgetSeparatorExtent
the test checks for this, and skips if another style is in use.
So far only the macOS style is affected by this. See the original
change in fba33a6bbc09bb278df75829d8d705863d40a6a3.
Fixes: QTBUG-124733
Pick-to: 6.5 6.2
Change-Id: Ifc741336bd9725ef0fea9f0474e27b7481f3a183
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 3d99f90b50ab22ef5ab4433c57f9ee584a0a7cae)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
gcc version 13.2.0 (Ubuntu 13.2.0-23ubuntu4) seems to remove some
code in release builds that is embedded in a macro in qtransfrom.cpp.
This patch changes the macro into a function such that it is not
removed by gcc.
It seems like the switch statement is (wrongly) optimized away if it is
embedded in the QTransform::map(QPolygonF) overload. nx and ny are
always 0 (as initialized by QPolygonF) after the macro (but only within
the QTransform::map(QPolygonF) function.
The bug happens only in a release build. Added debug messages of nx and
ny created no output, adding qDebug() << t, which made the macro work.
It seems that a complex combination of macro and switch statement can
tigger the bug in gcc. So rewriting the macro as a function works around
the bug.
Fixes: QTBUG-127723
Change-Id: I7e0b02cde276e591cf773f4e18dd505134421957
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 11b70b66de627d3bd0ef4193d5cfa624c88ac96a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The test function renders a pixmap into a widget that is never shown.
It checks for a crash, without failing or passing.
tst_QWidget::render_graphicsEffect() tests the same code path.
Remove the unneeded test function.
Change-Id: I1b64e0466c5a133deec28d0f74ef5acd9858e1ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
(cherry picked from commit dfdcb90ffdec0c3a4f7c1c5c59dfba5c04b8c521)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
It's failing to produce output in reasonable time and blocking the CI.
Since this test is basically a syntax checker, it not being present for
WASM is not a great loss.
Task-number: QTBUG-128322
Change-Id: Ic49e7523af63d5819c13fffdd7a752534b77f0ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit f414505eaac5c222fc6404b9cda24fec25f68a7a)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The embeddedwindows example illustrates embedding child windows with
transparency enabled. On Windows, this is implemented using layered
windows with the WS_EX_LAYERED extended window style. To make this work
with child-windows, we need to mark the application as at least Windows
8 aware.
Change-Id: I3a2e4f6018b3d2aee883ab755b63ad75bc8c80e8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
(cherry picked from commit 4e7f5c43a3be609502ccc15861319503dc2c842b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Add a check that the reference we create the TestAXObject object from is
valid, and assert that it is before calling properties. Verify that the
rows we get all have the correct number of children (the columns) before
trying to read the cell values.
As a drive-by, change the relevant code to use property syntax, and
release objects consistently.
Task-number: QTBUG-122751
Change-Id: I1db3e4446c569235cfc0f3092adc7369ad826368
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit dac1a338d31be82004f0f2666105ad18e557409b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Emit debug output if we fail to get child, row, or column lists from a
table or row element.
Task-number: QTBUG-122751
Change-Id: Id8e4d2e46db089fab8295b314f66163e8c9a893c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 283ff11d0fd3df07d7500020e9af379725af1e72)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Now that qt.rhi.general is not the only category, this is
not ideal.
Change-Id: Ied3533327dc310cee5fce75fe5760454167161b7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
(cherry picked from commit a537703a4df516da9b7f9126c719a1ccb9271647)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When setting the current index through the related model's
QItemSelectionModel::setCurrentIndex(), the selection can also change.
However, attempting to shift-select after doing so would produce
an unexpected selection, because the internal variable that keeps
track of the start index of the current selection would still have
its old value.
This change moves where said variable is set: instead of doing that
in QAbstractItemView::setCurrentIndex(), it is now done inside the
currentChanged() slot instead. This slot will get called both when
the selection is modified through the QAbstractItemView class itself,
as well as when it's modified from the outside (e.g. from the model).
Pick-to: 6.7 6.5 6.2
Fixes: QTBUG-127381
Change-Id: I6d38320e656aa5a102ce079604590672c88ecad1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit fb2d64bc57aadf5bf140c72cf7eb2a5f391b7d55)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
lastIndexOf will convert the `needle` to unsigned char, which is then
'upcast' to int, before we search. But the string itself was searched
using signed char, meaning any values with the signed bit set would
mismatch.
Add tests for indexOf and lastIndexOf.
Amends 4c12ae7e67
Fixes: QTBUG-128199
Change-Id: I0ce7d7d9741f21650ef6f0f012a94e00d84a0f02
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 7b1f3bdc503ea7aceacc9fa8d388d843f1d7b131)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
We want to be able to index into the metaobject from code generated by
qmltyperegistrar. And we don't want to rely on some implicit promise
that certain methods are in the "right" order in the output. This is
similar to what we've done with properties.
Change-Id: I8d97b65598338fcff57c6b0866708232066c94cb
Task-number: QTBUG-127442
Reviewed-by: Olivier De Cannière <olivier.decanniere@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit 484e72a1074279dca1253ae07515461ad231de3c)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
QtAbstractItemModel used to be a part of QtDeclarative
and is being moved to QtCore based on API reviews.
Task-number: QTBUG-126976
Task-number: QTBUG-127089
Change-Id: I28a921a113ec4f3ad298bf55b40aea334e7721cf
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
(cherry picked from commit baed8a24d07de87da61e9d5e3dbffc8d8ca92918)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Iterators no longer provide it, because they may need to return a
temporary in some occasions.
Fixes: QTBUG-128102
Change-Id: Ide0a7a84f612fff73afffffd49889321cb70505f
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
(cherry picked from commit cb40a1fa7f4b06acced1d17e8333742084092f9e)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The ODF writer would ignore the default font set on the document
and just output default values according to spec, such as "Sans"
for the font family.
With this patch, any settings set explicitly on the default font
will be taken into account, granted that they are not overridden
by any properties in the QTextCharFormat.
[ChangeLog][Text] The ODF backend to QTextDocumentWriter will now
respect the default font set on the QTextDocument.
Fixes: QTBUG-124570
Change-Id: Ia937420f7f721bbf3264661160cb0a593907358c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
(cherry picked from commit 77a9a208227ecf750d620b3048053fd4fc4299a4)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The separator was changed at CLDR v44 to use a plain aleph, U+0623,
rather than the U+0627 aleph with hamza above previously used. This
is, in both cases, followed by U+0633, "seen".
Task-number: QTBUG-121325
Task-number: QTBUG-126060
Pick-to: 6.7 6.5
Change-Id: I013525e0876c4c47111846135c9311e7b3442dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 45ec096672a67db01d29f78e7e910bebab36e31b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
David Faure
Andreas Bacher
Thiago Macieira
Christian Ehrlicher
Fabian Kosmale
Mårten Nordheim
Łukasz Matysiak
Milian Wolff
Ivan Solovev
Marc Mutz
Tatiana Borisova
Volker Hilsheimer
Edward Welbourne
Jøger Hansegård
Ahmad Samir
Tor Arne Vestbø
Tian Shilin
Giuseppe D'Angelo
Matthias Rauter
Axel Spoerl
Liang Qi
Laszlo Agocs
Kaloyan Chehlarski
Ulf Hermann
Soheil Armin
Eskil Abrahamsen Blomfeldt