If the types doesn't match in QVariant::compare we do a comparison based
on QString, this may end up indicating a full match, though the we don't
match according to cmp. In this case it would be better if we preserved
the non-matching to avoid breaking ordering.
[ChangeLog][QtCore][QVariant] Fixed ordered comparison between QVariants
that do not match but produce identical toString output.
Task-number: QTBUG-40363
Change-Id: I84a8eca11e8875dba9948bde2906ae7c5aa35704
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As a side effects it also adds core templates types to the tests
Change-Id: I0e3338e0bffdf21982aa83d404c83288e54411f4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
Fix disconnection from pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
Commit 9cc106d9d7 fixed connect, so apply
the same fix in disconnect
[ChangeLog][QtCore][QObject] Fixed disconnecting from pointer to member
signal that belongs in the base class but whose type is explicitly given
as a pointer to a member in the derived class
Task-number: QTBUG-40638
Change-Id: Ia546fc8f36e1ea0dd0645bdd820aea47f43677ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qtbase contains four identical implementations of next power of two,
these should be shared and the implementation made available to other
qt modules, as it is also used many places outside of qtbase.
[ChangeLog][QtCore][QtMath] Introduced qNextPowerOfTwo methods.
Change-Id: Id23fbe5ad6bae647b30d5a4212c0330e48a50278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This brings QTimer::singleShot on par with QObject::connect in
terms of the new Qt5 syntax. With this patch, it is now possible
to connect singleShot to a member pointer, a static function
pointer and a functor (with or without a context object).
The short code path for 0 msec is not yet implemented - it will
require further modifications to QMetaObject before it will be.
An additional SFINAE on the new singleShot overloads had to be
implemented to prevent tricking the compiler into believing
const char * might be a function pointer.
[ChangeLog][QtCore][QTimer] Implemented new style connect syntax,
including functors, in QTimer::singleShot
Task-number: QTBUG-26406
Change-Id: I31b2fa2c8369648030ec80b12e3ae10b92eb28b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
IteratorOwner pointer specialization was failing for void* because of
an invalid function overload.
Change-Id: I80355ddd2b871c1fa2fa5bf5a4ed8bc7768fc3c9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Patch 9a08483d76 introduced a regression,
tst_qmetatype test was not meant to be removed.
Change-Id: I5456ffbbd9d9f8e461f828c6183e46dabf67952b
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The macro should stringify value of the given token not the token
itself.
Task-number: QTBUG-37547
Change-Id: I90f4fa613bd13d5a581828ab13f620b40dfd3593
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test instantiates enormous amounts of templates in one compilation
unit. All clang versions, that I tested, suffers from performance issues
while compiling the test, the cost depends on the version. The most
affected are shipped by Apple.
Task-number: QTBUG-37237
Change-Id: I0959c1a4a6faee448ae1dae5c1e70ee06cefbd9c
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We do not need to check all possible basic type combinations in
the autoregistration test.
Change-Id: Ibfb97a93d9d1862e669d843988976690bbc83c74
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Redundant and unused variadic macro arguments were removed. For macros
with known count of arguments, named arguments are preferred.
Common code was moved out from macros so it is not generated over and
over.
Change-Id: Ib5106555d0d3c6cadfbdbdbd614831240b6d762f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
And takes a very long time to build if it doesn't run out of memory.
Task-number: QTBUG-37237
Change-Id: I8c7fae4d2d99ad59c6d6306da2df554a05955446
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
So far we did bind the definition of Q_COMPILER_VARIADIC_MACROS to
C++11 (so gcc, clang will not define it in default gnu++98 standard).
However, variadic macros are a feature of the gcc preprocessor since
version 2.97, and are enabled in the default configurations on gcc, clang,
icc.
This might cause warnings and errors though if one enables additional
warnings in gcc, clang (e.g. by -pedantic). Anyhow, as a precedent
qglobal.h already relies on 'long long' ... The warning can be disabled
by adding '-Wno-variadic-macros'.
[ChangeLog][Compiler Specific Changes] Variadic macros are now enabled
more liberally for gcc, clang, icc. If you have warnings (because you e.g.
compile with -pedantic), disable them by -Wno-variadic-macros.
Change-Id: Ie979b85809508ad70cab75e6981f20496429f463
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
q_func() which is declared in Q_DECLARE_PUBLIC is usually private.
We should use q_ptr directly in QObjectPrivate::connect, otherwise
it does not compile when trying to access the private q_func
Change-Id: I235165a0994327102dbb31c390c2cafdffe806dc
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
For example, QObject is non copyable (its copy constructor is deleted or
private via Q_DISABLE_COPY). It should still be allowed to pass a reference
to a QObject as an argument to as signal (or slot).
This fixes a compilation failure.
Task-number: QTBUG-36119
Change-Id: I9bcf477e347d69fdae2543c99781b6421883be78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to docs DynamicPropertyChange event should be sent from
setProperty function only when property is added, removed or
changed.
Change-Id: I080a27a4119a63580b03172f4b5b367338c6f440
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
tst_QObject is getting big, so make a separate test for QSignalBlocker,
but leave parts of signalsBlocked() in tst_QObject as that seemed to
have been the only check for blockSignals(true) actually blocking signal
emission.
Change-Id: I1cfac035e0e39203eea8626d43f316cc6244ee86
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When QSignalBlocker was reviewed, move semantics were asked for.
This patch add them.
This makes QSignalBlocker usable as a by-value argument (to transfer
control of signal blocking into a function) as well as as a return
value (to transfer control of signal blocking out of a function).
Change-Id: I714aa2a283bb33dba76e860649e88ed202e913c5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's still a relocation, but at least it can be marked read-only
after the relocation run, if indeed the dynamic linker goes to
such a length.
Change-Id: Ibadddac3ab99d2e58cc32cfd57311bddd3bdb0ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHash::key() is O(n) and we're calling it n times. That can make repeated
calls to the meta object builder very slow, as for example QQmlPropertyMap
when inserting properties repeatedly.
Fortunately this is easy to fix, as the value in the hash map is also the
index, so we can simply iterate over the hash once. With the exception of
the class name, which we have to treat specially to ensure that it is always
the first entry in the string table.
Task-number: QTBUG-32720
Change-Id: Ic954c45c454107feee83216131f601cc69d4c63b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As the last line in the QObject destructor, we call setParentHelper(0) to
remove ourselves from the parent. In the process of that we also initiate the
QML parentChanged callback. The first thing that parentChanged callback used to
do (but now does it too late, after 26350b5ceafa0ade1328037f6234a7d288eb8f48 in
qtdeclarative) is to check if the object was deleted and then return. We could
re-introduce the check there, but I think it's cleaner to not bother calling
the callback on a dead object in the first place.
Change-Id: Ia4d43b65a9b3744a451b4c312a2d6f9c0e3b67dc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Add few cases where conversion to or from LongLong was missing
We need to make it work if we want to use variant.canConvert<qint64>
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert with longlong
Change-Id: I0f65073802b62d99250601dd90a8cd2e4d934b60
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Only DirectConnection is tested
Change-Id: I525c6a65428489c34e58d1d9600b4e5ebda733b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We must not include qt_windows.h in public headers,
otherwise we're cluttering the environment with a colorful
bouquet of Windows API preprocessor macros and typedefs.
Task-number: QTBUG-34058
Change-Id: I415717ea2a47f39e7f4b7ce1c1df9d49afc99278
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The QCoreApplication test has quite a few test cases that we would like
to exercise using the GUI event-dispatcher. Instead of duplicating the
tests for the GUI dispatcher, we inherit tst_QCoreApplication, which
also lets us add extra tests that are specific to tst_QGuiApplication.
Change-Id: Ib411457131b8d3fed871f682c1c0568577f6127d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Similar to commit 8b062418 (MetaType: Fix operator{+,-}(int)
with the type-erased const_iterators., 2013-09-11), explicitly
create a copy of the iterator and intialise it.
Change-Id: I8b9edef40ca00c826f72768cba4a0992e55371f8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The responsibility of sendWindowSystemEvents() is to process events from
the window system. Historially that logic was part of the QPA/QWS event
dispatcher, which naturally also sent posted events. Through refactoring,
the code at some point ended up in in the QWindowSystemInterface class,
still with the posting of events in place.
This resulted in QPA event dispatchers adopting a pattern of just calling
sendWindowSystemEvents(), as that would cover both posted and window system
events. Other event dispatchers would call sendWindowSystemEvents(), and
then use a base-class implementation from QtCore for processing events,
resulting in two calls to QCoreApplication::sendPostedEvents() per
iteration of processEvents(). This breaks the contract that processEvents
will only process posted events that has been queued up until then.
We fix this entanglement by removing the sendPostedEvents() call from
QWindowSystemInterface::sendWindowSystemEvents() and move it to the
respective event dispatchers. For some EDs it means an explicit call
to sendPostedEvents, while others were already doing sendPostedEvents
though a separate source (GLib), or using a base-class (UNIX/BB), and
did not need an extra call.
We still keep the ordering of the original sendWindowSystemEvents()
function of first sending posted events, and then processing any
window system events.
Task-number: QTBUG-33485
Change-Id: I8b069e76cea1f37875e72a034c11d09bf3fe166a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Q_STATIC_ASSERT gives better error with C++11 enabled.
Aslo the qt_check_for_QOBJECT_macro had warning on some compiler since
it used null reference
Change-Id: Ic6115da800064b00c50a5762f0b79f5f656bf750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Before this patch,
qRegisterMetaType<QSharedPointer<double> >("QSharedPointer<double>")
without a metatype declaration fails to compile, whereas it works
with Qt 5.1 (ie, before commit e9a69c3ba9)
Change-Id: I9408f711c9df810ff29b879b7696dab81c1160f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The destructor of the ConverterFunctor calls unregisterConverter. If
the instance is static (as it is in qmetatype.h), then this method
can be called after the QGlobalStatic has already been destroyed.
Change-Id: I33b70734cbe09dfa888e887280c349e43ad1b855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt5, the QMetaObject do not contains the string name of the
builtin types, but only the QMetaType id. QMetaMethod::typeName
convert back from the id to the string. But if the type is aliased,
the string of the main type is returned.
This was the case for example for qint64 which is transformed to
"qlonglong".
This causes a regression in QMetaType::invoke when trying to invoke a
method which return an aliased type, since the string comparison would
fail.
Fix the problem by also comparing the metatype id.
Changelog: QMetaMethod::invoke: Fix return of aliased meta type
Task-number: QTBUG-33222
Change-Id: Iec7b99dcbf7b23eb818de74f413e4451ce510ac4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Follows a similar include-pattern as the qguieventdispatcher test.
Change-Id: Ie8669a5bc155abd6687e81526f2b95d0d19b009e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A QCoreApplication may run a different event dispatcher, such as the
QEventDispatcherBlackberry, and QGuiApplications will have the GUI
dispatcher provided by the QPA plugin, such as QCocoaEventDispatcher.
Neither support X11ExcludeTimers.
Change-Id: Id5ea1c7dd74a127e13fa4d2eaa9a1bd2715a9dbb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This prevents deadlocks in case the destructor re-enters.
(Example: a functor containing a QSharedPointer of a QObject)
This also fixes a leaked slot object in disconnectHelper.
Change-Id: Ia939790e3b54e64067b99540974306b4808a77f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Icd6a09402c3cf14286f4ba1f8f4c99ac483ec1a3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The deadlock is caused because the QEvent is destroyed while holding the
event list mutex. And the QEvent may have a custom destructor that will
re-enter the event handlng code.
The QScopedPointer that should destroy the event must be created after
the MutexUnlocker.
Regression introduced by commit f9035587b9
Task-number: QTBUG-31606
Change-Id: I6b2cbc2656eacdec61b641886953f00bf5b3ff36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes for more informative debug output when the tests fail.
Change-Id: Ib07dd79452a56413c711394dd72aa37dbb4a70d7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
There is a mismatch how QML and C++ converts QJsonValue. This patch
unifies conversions by adding QJsonValue support in QVariant::convert().
Change-Id: I8a1db3d77c517945ef48064b4b66ba03aa4f2fd0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
In Qt 5, we declared that throwing from event handlers is undefined
behavior. So stop testing this.
We will try our best to capture and pass along std::bad_alloc, but even
that might not work, depending on compiler settings. In particular,
after the upgrade to MinGW/GCC 4.8 with DW2, this test stopped working.
Task-number: QTBUG-31615
Change-Id: Ibf5fb2ce0c48b983549096bf7aac434b6ed3ac2e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In QML it is common to connect signals to slots that are implemented as
JavaScript functions. QML used to maintain separate data structures that
mirrored the QObject connection list and kept references to the JavaScript
objects necessary to perform the call on signal activation.
The recent addition of functor based QObject::connect makes it possible
to store this information in QSlotObjectBase sub-class instead, which
eliminates any extra bookkeeping.
This patch adds internal connect and disconnect overloads to QObjectPrivate
that allow for connecting QObject *sender, int signalIndex to a given
QSlotObjectBase and similar for disconnect.
Change-Id: I90f43d13eb95bd884d752484cf4faacc446f4d6a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Section 4.2.2.4 of ISO 8601 allows for decimal fraction representations
of dates and times. Currently, when calling
QDateTime::toString(Qt::TextDate) or QDateTime::toString(Qt::ISODate),
the milliseconds will be omitted. However,
QDateTime::fromString(str, Qt::TextDate) and
QDateTime::fromString(str, Qt::ISODate) already support decimal
fraction representations, so this patch just adds this support to
QTime::toString, and hence QDateTime::toString().
Task-number: QTBUG-30250
Change-Id: If58e4b3d3105322c51d11a76b832e5e634d8991f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a way to enable operator<, operator== and operator<<
into QDebug for QVariants with custom types.
Change-Id: I3d12d891bd7252ad2b8f1de69bced354800a1f29
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Although it is possible to construct those containers, they are not
usable, as qHash(float) and qHash(double) are ambiguous.
Also don't use CustomMovable as a container key.
It is not equality or lessthan comparable.
Change-Id: I8c7ee068250e2e2b3427769153e3017721c13c50
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix connection to pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
The current code only use the QMetaObject of the type coming from the
function type to look up the signal id. But if the signal was casted
to a pointer to member function of a derived type, then we also need to
look in the base classes
Change-Id: Ib98fc38f63942946acb34d9f83c100991d58e4e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allan Sandfeld Jensen
Lars Knoll
Jędrzej Nowacki
Frederik Gladhorn
Olivier Goffart
Friedemann Kleint
Mitch Curtis
Stephen Kelly
Dario Freddi
Keith Gardner
Tor Arne Vestbø
Sergio Ahumada
Kai Koehne
Marc Mutz
Oliver Wolff
Thomas McGuire
Tomasz Olszak
Simon Hausmann
Konstantin Ritt
Joerg Bornemann
Oswald Buddenhagen
Andrew Knight
Thiago Macieira
Sergio Ahumada
Caroline Chao
Christoph Schleifenbaum