... instead of sheepishly assuming qmake_pwd().
it also canonicalizes consistently with the relative output path now.
Change-Id: I86231f7259179020643405f3c0e696a74031aa4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would trigger only if the input file name was already absolute,
matched the native path separator, and some (likely) other conditions.
as this behavior was almost unpredictable, it would be not very useful.
so save ourselves the headache and just remove it.
Change-Id: Ic457f487f6d0ce9f7a5f192859c9efa9c2de2b63
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's easy when it is a simple list of files (or just absent). however,
it can also contain expandos, and in this case it's definitely not a
good idea to treat it partly (but not really) as a single shell command.
Change-Id: I7ef32a56f276b06579fc7094357c5f7612eaf205
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
... because it also fixes the path, and we'll need the "plain" name later.
Change-Id: I86da8f53e44a68005c413c4b78b1b1682746e22e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
more efficient use of string functions.
Change-Id: I3d95d6379eaab025b18449b706f93631a2132aad
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this isn't some fuzzy logic, the call sequence is well determined.
Change-Id: I1696b49ed687da83d2969efcfe23ac6565630020
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
In ancient times, the existence of QMAKE_RUN_CXX_IMP determined the
use of implicit rules. The code path for implicit rules was turned
off in 2006 (0287fe3c), which probably was a refactoring artifact.
Later, implicit rules were enabled again using a different approach.
These days, the non-existence of QMAKE_RUN_CXX determines the use of
implicit rules.
We remove the dead code path now and rely on the latter condition.
One part of the dead code is a feature that turns off inference rules if
the OBJECTS_DIR is set or source file names do not match expectations.
If somebody ever missed this, it has been reimplemented otherwise.
Or not.
Change-Id: If3ce9904d9c1df6e4048c58c2452854cce7fa206
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of having each generator do its own magic (little surprisingly,
with different outcomes), add "stuff" to the search path in one place
used by all generators. this has several consequences:
- (unless disabled via CONFIG+=no_include_pwd) $$PWD is now consistently
prepended by all generators. most notably, this was entirely missing
from the MSVC generators (both nmake and VS) - despite them needing it
most. this also affects Xcode projects.
- $$OUT_PWD (if different from $$PWD) is now added right after $$PWD,
not at the end. this precedence clarification only makes sense, given
that qmake tries to make shadow builds as transparent as possible.
- the qmakespec's dir is now consistently appended. the UNIX and PBX
generators prepended it, while the rest already appended. few files
actually include qplatformdefs.h, so having it late in the search path
seems reasonable.
- the effect of CONFIG+=depend_includepath is now fully consistent with
the actual include path.
Change-Id: I5f7570183351ade29342ea74fef706a0738842bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
neither qmake_getpwd()'s return value nor a fileFixify()'d version of it
can be empty.
Change-Id: Ic3b7d20becc57209b9dbe71ad9dc8e7547d435b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Running 'make distclean' should remove all files generated by qmake,
including .qmake.stash/super. These files are considered owned by
a particular project (and hence a candidate for distclean), if it
lives in the same directory as the output dir of the project.
Task-number: QTBUG-42678
Change-Id: I224e9bac039eeacb6561e18acc7f8e867da5dab8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
A typo caused qmake to stop output dependency information
added by the depend_command clause.
Task-number: QTBUG-13334
Change-Id: I00fabc87438ce94e80341e6f88aa2e0eaab57e19
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Qmake tried to extract the actual executable part of an
extra compiler's commands and depend_command value and
then "fix" it by replacing the directory separators in
it with their local versions and calling QDir::cleanPath
on it.
This misfeature was implemented incompletely and led to
unexpected results (see the numerous attempts to fix
QTBUG-16372).
The user is responsible for passing a correct command by
calling the shell_quote or shell_escape functions if
necessary.
Change-Id: Ic4bfe9eeb697775cd99c865e7a9d335e63605dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it needs neither native separators, nor a trailing separator.
the QMAKE_PKGCONFIG_INCDIR default was already ok.
Change-Id: I1048b3870fd3ca09aa76b41aecda7d90402aa64a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This variable works like CLEAN_DEPS, but applies to the distclean target.
Change-Id: Ia30e8932b9acd6529298728dd5d0e038b0208d66
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commit will make qmake use -isystem automatically for any
compilers that declare support for it for any paths that are listed in
QMAKE_DEFAULT_INCDIRS.
Change-Id: I36fefc6d5bba61671f65669f0ea42704b3c3cf31
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the respective code was removed in 375edf7
Change-Id: Ie31ef4bc8970b5396f50f1c4963f378df816242a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's bogus in the first place that the meta files contain windows paths,
but straightening that out is a prohibitive effort. so instead generate
additional s/// commands which take care of these paths.
fwiw, the generated s///i command is a gnu extension. but as we are
doing this on windows only where we are using our built-in sed command
anyway, this should be fine.
Task-number: QTBUG-33794
Change-Id: I46fcc598db12816ee56b5371ab184f6277eb3a22
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
that means further detaching the generation and installation of debug
info from the thing calling itself A Debug Build.
Task-number: QTBUG-32412
Change-Id: I4d79d1ae4806c8e4a2d6a7ccd030fb88385dd7d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In particular this triggers in some cases of package building
where we are using a Qt version which for some reason has
forward slashes in its install prefix. Any mkdir command
run with this Qt build will fail because only backslashes are
recognized as path separators.
Task-number: QTBUG-34886
Change-Id: I2f957c6d348852ec555a67a35ae39921523b7b3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The fallback value is an empty string anyways.
Change-Id: I77a2d3ad275321cb8b2e059fb6359f921cbc697c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A bunch of empty and never-to-be-used directories makes the build tree
noisy and harder to navigate.
Change-Id: Iebef91c82d58a8d6a0047fb5439d50eb6806f557
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There was a mismatch of how we sanitized paths for dependencies of the
target and how those dependencies were sanitized (or not sanitized),
resulting in the target depending on 'some/path/foo.o' while the
extra compiler target was named 'some/path//foo.o', with an extra
slash. This confused 'make' enough to decide that it didn't know
how to build the dependencies for the target.
Change-Id: I181b86c291286cbbbb1f7b4c3b929a5f1dc163a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The pattern ${QMAKE_ needs to be at the beginning of the line, or not
start with a $ (which would make it a regular qmake variable).
Also, it's fine that the variable is of the QMAKE_VAR_foo type, as
these variables are resolved at generator time, but are constant
and do not depend on the inputs. This means we have to replace
extra variables in the output.
Change-Id: I21ad24ae770f2137e2d5d92a20ee54e2f3f4ca06
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These timestamps were useless and broken on non-ascii locales.
Change-Id: Iad08eb0f5dfd5e86f6451d6572365d0c080e6115
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
d28073d9 creates a distinction between "mac" and
"macx". The latter is not set on iOS, which caused
MakefileGenerator::target_mode to be set to TARG_UNIX_MODE.
Check for the "mac" active config instead of "macx".
Rename TARG_MACX_MODE -> TARG_MAC_MODE.
Change-Id: I7192788c33f5723034ba76da2492379dd454f0ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
this makes it possible to properly parametrize alternative linkers.
Change-Id: Ia9cf574544a0259975470366d278b6c5dc747906
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The Libs: line of the pkg-config files is constructed
by taking the name of the .pc file itself, and stripping
off the path and extension. However, the code which does
this does not handle path separators correctly when the
target OS and local OS are different. To get around this,
the custom string manipulation was replaced with a call
to QFileInfo::completeBaseName(), which can handle the
different path separators correctly.
Task-number: QTBUG-29700
Change-Id: Ia817b415d303b249f56fcc3d1f073cae99c43046
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
introduce the QMAKE_PKGCONFIG_FILE variable for that purpose.
this is another feature that is needed for a bugfix ...
Change-Id: I08f470e1b2b7dd318af9195330c15d813fcd55ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Metafiles such as .prl and .pc files contain paths that have to be
adjusted during installation. The same code is used for unix and
windows so move it into the base class.
Change-Id: I82db89ec83820a4fa0214ba15e7cd63438f6dc91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
these variables are somewhat magic: they are relative to DESTDIR, and
they also specify the installation location relative to target.path.
the actual output directories are created by other code.
Change-Id: Iead3006057516f5a49b6fd4bd8996a062c984fce
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
nmake depends on a variable being assigned before it is referenced, so
just write it out to every Makefile as the very first thing.
this is nicer than the previous hack anyway.
Change-Id: I50f409919352f560f7ef6c848a2f7c51d1878148
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is necessary for having a clean way to recurse even from leaf
makefiles.
the location where the variable is written in the makefile is somewhat
bizarre, but the code is so convoluted that finding a better place would
mean either a lot of duplication or a lot of prior refactoring.
Change-Id: I68e4cf7e3814f6c60b2e3421d69775c993dafb23
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this should be fatal, but so should be a lot of other conditions.
Change-Id: I0c2c0bb9590ea1e4d0eae76e29eda34915914217
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
DEPENDPATH merely says where to look for impliciit dependencies, not
where to find explicit ones.
fwiw, the other way round may be considered correct, but DEPENDPATH
exists for the sole purpose of limiting which paths should cause
recompilations, so it would be counterproductive to extend with with
VPATH.
Task-number: QTBUG-11912
Change-Id: I86450b5fd5aeb1f1b015b53f0adcd167ff4ce04d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The content in the prl file is not compatible with what CMake
expects in the value of the IMPORTED_LINK_INTERFACE_LIBRARIES
property. That property expects a list of IMPORTED targets or
full paths to libraries.
The prl file gives us a whitespace separated string of content
suitable for passing to ld, that is, it contains -L and -l content.
As this would take a lot of error prone parsing in cmake code in
order to resolve the content to a list of full paths to libraries
(which can be processed by any cmake generator), it's better to
remove the code until qmake is able to generate a list of full
paths.
Change-Id: I72fe8e862b7f3bd25a7f9a03db94d2e9b815d08a
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The generated CMake files need to pass ';' separated libraries to
the IMPORTED_LINK_INTERFACE_LIBRARIES property, otherwise we get errors
such as this:
http://testresults.qt-project.org/ci/QtTools_master_Integration/build_00386/win32-msvc2010_Windows_7/log.txt.gz
(grep for QtCore5.lib.lib)
Rather than a naive and error prone replacement of whitespace, generate
the appropriate ';' separated content directly in the qmake prl file.
Change-Id: I8eb5e233a0318b57ec74b86d910583ff99c29415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I9c9964703dedfdab6e7bfac80be22bd5570e2e49
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this may have worked a decade ago, but now it only produces funny
Makefiles (and needs hacking main.cpp). the feature doesn't seem *too*
important, so just clean it out.
Change-Id: I50a60b0e30341f0b523e4a5731c770c9c1013f8b
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't read the spec from scratch for every library just to get
QMAKE_LFLAGS_RPATH. we can perfectly use our current project for that
purpose.
Change-Id: I4e408b3fd5de81652181df032aa53cd8f2f8f806
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
By putting object_with_source into CONFIG one could force qmake to
output each object file into the same directory as its source file
came from. This was a rather nasty work-around from Qt 3 times to
support source files with the same file name in a project.
Unfortunately this doesn't play nicely with shadow builds.
Change-Id: Ie79e14d36ba6eac4219edc14ea75ab6a96f9ea96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of re-assembling a list from the variables, take the original
command line minus some explicitly stripped out options. this is way
less code and poses no synchronization problem between the two parts.
as a "side effect", variables obtained from $QMAKEFLAGS won't multiply
with each makefile nesting level, as the generated command line won't
replicate data obtained from the environment.
Change-Id: I5d1ce0f11efb338f60405529f9818910103b1b0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this adds a .base "member" to the install "structure". if specified, only
this much is stripped from the front of each element of .files, rather
than the entire path, to obtain the target filename.
Change-Id: Ic39fcf71c4ad874ffabbbad113be9cdc6e3f7260
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't make a single string, but a string list which is join()ed in the end.
this is a tad slower, but the code is way easier to work with.
Change-Id: I1ff7168c2770998761a6081be8080c743ddc94a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make a proper stringlist of commands, and join it in reverse order
only at the end. the reversal ensures that we can cleanly fold up
directory hierarchies we may build.
Change-Id: I9a241361588a6965283aec5258e1d622b35514e0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
otherwise the second installation on unix would be bogus.
Change-Id: I162533ee262c6820e7e2d4710b5342cafecd9d59
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we just determined that the file does not exist, so it's entirely
pointless to query its type from the file system. consequently, the
respective fallback branch would assume a regular file anyway.
Change-Id: I42590ffc2a5f650fb430a9398cb1859217ed4350
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the value is still re-processed numerous times, end each "exit path"
does own escaping, while not every path can deal with an escaped path.
Change-Id: I0bf4a043809bf4b7877d02e5d8dfe8f794a7dd00
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Oswald Buddenhagen
Jani Heikkinen
Frederik Gladhorn
Joerg Bornemann
Tor Arne Vestbø
Matti Paaso
Giuseppe D'Angelo
J-P Nurmi
Joerg Bornemann
Oswald Buddenhagen
Tasuku Suzuki
Andrew Knight
Thiago Macieira
Frederik Gladhorn
J-P Nurmi
Eskil Abrahamsen Blomfeldt
Konstantin Ritt
Tor Arne Vestbø
Sergio Ahumada
Dmitry Shachnev
Laszlo Papp
Samuel Rødal
Morten Johan Sørvig
Matt Fischer
Mark Brand
Debao Zhang
Stephen Kelly
Iikka Eklund
Marc Mutz
Oswald Buddenhagen
Sergio Ahumada
Joerg Bornemann