When QSignalBlocker was reviewed, move semantics were asked for.
This patch add them.
This makes QSignalBlocker usable as a by-value argument (to transfer
control of signal blocking into a function) as well as as a return
value (to transfer control of signal blocking out of a function).
Change-Id: I714aa2a283bb33dba76e860649e88ed202e913c5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's still a relocation, but at least it can be marked read-only
after the relocation run, if indeed the dynamic linker goes to
such a length.
Change-Id: Ibadddac3ab99d2e58cc32cfd57311bddd3bdb0ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHash::key() is O(n) and we're calling it n times. That can make repeated
calls to the meta object builder very slow, as for example QQmlPropertyMap
when inserting properties repeatedly.
Fortunately this is easy to fix, as the value in the hash map is also the
index, so we can simply iterate over the hash once. With the exception of
the class name, which we have to treat specially to ensure that it is always
the first entry in the string table.
Task-number: QTBUG-32720
Change-Id: Ic954c45c454107feee83216131f601cc69d4c63b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As the last line in the QObject destructor, we call setParentHelper(0) to
remove ourselves from the parent. In the process of that we also initiate the
QML parentChanged callback. The first thing that parentChanged callback used to
do (but now does it too late, after 26350b5ceafa0ade1328037f6234a7d288eb8f48 in
qtdeclarative) is to check if the object was deleted and then return. We could
re-introduce the check there, but I think it's cleaner to not bother calling
the callback on a dead object in the first place.
Change-Id: Ia4d43b65a9b3744a451b4c312a2d6f9c0e3b67dc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Add few cases where conversion to or from LongLong was missing
We need to make it work if we want to use variant.canConvert<qint64>
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert with longlong
Change-Id: I0f65073802b62d99250601dd90a8cd2e4d934b60
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Only DirectConnection is tested
Change-Id: I525c6a65428489c34e58d1d9600b4e5ebda733b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We must not include qt_windows.h in public headers,
otherwise we're cluttering the environment with a colorful
bouquet of Windows API preprocessor macros and typedefs.
Task-number: QTBUG-34058
Change-Id: I415717ea2a47f39e7f4b7ce1c1df9d49afc99278
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The QCoreApplication test has quite a few test cases that we would like
to exercise using the GUI event-dispatcher. Instead of duplicating the
tests for the GUI dispatcher, we inherit tst_QCoreApplication, which
also lets us add extra tests that are specific to tst_QGuiApplication.
Change-Id: Ib411457131b8d3fed871f682c1c0568577f6127d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Similar to commit 8b062418 (MetaType: Fix operator{+,-}(int)
with the type-erased const_iterators., 2013-09-11), explicitly
create a copy of the iterator and intialise it.
Change-Id: I8b9edef40ca00c826f72768cba4a0992e55371f8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The responsibility of sendWindowSystemEvents() is to process events from
the window system. Historially that logic was part of the QPA/QWS event
dispatcher, which naturally also sent posted events. Through refactoring,
the code at some point ended up in in the QWindowSystemInterface class,
still with the posting of events in place.
This resulted in QPA event dispatchers adopting a pattern of just calling
sendWindowSystemEvents(), as that would cover both posted and window system
events. Other event dispatchers would call sendWindowSystemEvents(), and
then use a base-class implementation from QtCore for processing events,
resulting in two calls to QCoreApplication::sendPostedEvents() per
iteration of processEvents(). This breaks the contract that processEvents
will only process posted events that has been queued up until then.
We fix this entanglement by removing the sendPostedEvents() call from
QWindowSystemInterface::sendWindowSystemEvents() and move it to the
respective event dispatchers. For some EDs it means an explicit call
to sendPostedEvents, while others were already doing sendPostedEvents
though a separate source (GLib), or using a base-class (UNIX/BB), and
did not need an extra call.
We still keep the ordering of the original sendWindowSystemEvents()
function of first sending posted events, and then processing any
window system events.
Task-number: QTBUG-33485
Change-Id: I8b069e76cea1f37875e72a034c11d09bf3fe166a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Q_STATIC_ASSERT gives better error with C++11 enabled.
Aslo the qt_check_for_QOBJECT_macro had warning on some compiler since
it used null reference
Change-Id: Ic6115da800064b00c50a5762f0b79f5f656bf750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Before this patch,
qRegisterMetaType<QSharedPointer<double> >("QSharedPointer<double>")
without a metatype declaration fails to compile, whereas it works
with Qt 5.1 (ie, before commit e9a69c3ba9)
Change-Id: I9408f711c9df810ff29b879b7696dab81c1160f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The destructor of the ConverterFunctor calls unregisterConverter. If
the instance is static (as it is in qmetatype.h), then this method
can be called after the QGlobalStatic has already been destroyed.
Change-Id: I33b70734cbe09dfa888e887280c349e43ad1b855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The WaitForMoreEvents flag only guarantees that we will process _some_
events -- either if they are in the event queue already, or by sleeping
and then waking up to process an event. This event might be a system
event, not the timer firing, so a single call to processEvents() is
not enough to guarantee that the timer has fired. Instead we do a
Q_COMPARE with a timeout, where we continiously process events until
we see that the timer fired.
Change-Id: I5dc04377f04190f3505be22e877af73d11b7547d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt5, the QMetaObject do not contains the string name of the
builtin types, but only the QMetaType id. QMetaMethod::typeName
convert back from the id to the string. But if the type is aliased,
the string of the main type is returned.
This was the case for example for qint64 which is transformed to
"qlonglong".
This causes a regression in QMetaType::invoke when trying to invoke a
method which return an aliased type, since the string comparison would
fail.
Fix the problem by also comparing the metatype id.
Changelog: QMetaMethod::invoke: Fix return of aliased meta type
Task-number: QTBUG-33222
Change-Id: Iec7b99dcbf7b23eb818de74f413e4451ce510ac4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Follows a similar include-pattern as the qguieventdispatcher test.
Change-Id: Ie8669a5bc155abd6687e81526f2b95d0d19b009e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A QCoreApplication may run a different event dispatcher, such as the
QEventDispatcherBlackberry, and QGuiApplications will have the GUI
dispatcher provided by the QPA plugin, such as QCocoaEventDispatcher.
Neither support X11ExcludeTimers.
Change-Id: Id5ea1c7dd74a127e13fa4d2eaa9a1bd2715a9dbb
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This prevents deadlocks in case the destructor re-enters.
(Example: a functor containing a QSharedPointer of a QObject)
This also fixes a leaked slot object in disconnectHelper.
Change-Id: Ia939790e3b54e64067b99540974306b4808a77f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Icd6a09402c3cf14286f4ba1f8f4c99ac483ec1a3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The deadlock is caused because the QEvent is destroyed while holding the
event list mutex. And the QEvent may have a custom destructor that will
re-enter the event handlng code.
The QScopedPointer that should destroy the event must be created after
the MutexUnlocker.
Regression introduced by commit f9035587b9
Task-number: QTBUG-31606
Change-Id: I6b2cbc2656eacdec61b641886953f00bf5b3ff36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes for more informative debug output when the tests fail.
Change-Id: Ib07dd79452a56413c711394dd72aa37dbb4a70d7
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
There is a mismatch how QML and C++ converts QJsonValue. This patch
unifies conversions by adding QJsonValue support in QVariant::convert().
Change-Id: I8a1db3d77c517945ef48064b4b66ba03aa4f2fd0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
In Qt 5, we declared that throwing from event handlers is undefined
behavior. So stop testing this.
We will try our best to capture and pass along std::bad_alloc, but even
that might not work, depending on compiler settings. In particular,
after the upgrade to MinGW/GCC 4.8 with DW2, this test stopped working.
Task-number: QTBUG-31615
Change-Id: Ibf5fb2ce0c48b983549096bf7aac434b6ed3ac2e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In QML it is common to connect signals to slots that are implemented as
JavaScript functions. QML used to maintain separate data structures that
mirrored the QObject connection list and kept references to the JavaScript
objects necessary to perform the call on signal activation.
The recent addition of functor based QObject::connect makes it possible
to store this information in QSlotObjectBase sub-class instead, which
eliminates any extra bookkeeping.
This patch adds internal connect and disconnect overloads to QObjectPrivate
that allow for connecting QObject *sender, int signalIndex to a given
QSlotObjectBase and similar for disconnect.
Change-Id: I90f43d13eb95bd884d752484cf4faacc446f4d6a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Section 4.2.2.4 of ISO 8601 allows for decimal fraction representations
of dates and times. Currently, when calling
QDateTime::toString(Qt::TextDate) or QDateTime::toString(Qt::ISODate),
the milliseconds will be omitted. However,
QDateTime::fromString(str, Qt::TextDate) and
QDateTime::fromString(str, Qt::ISODate) already support decimal
fraction representations, so this patch just adds this support to
QTime::toString, and hence QDateTime::toString().
Task-number: QTBUG-30250
Change-Id: If58e4b3d3105322c51d11a76b832e5e634d8991f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a way to enable operator<, operator== and operator<<
into QDebug for QVariants with custom types.
Change-Id: I3d12d891bd7252ad2b8f1de69bced354800a1f29
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Although it is possible to construct those containers, they are not
usable, as qHash(float) and qHash(double) are ambiguous.
Also don't use CustomMovable as a container key.
It is not equality or lessthan comparable.
Change-Id: I8c7ee068250e2e2b3427769153e3017721c13c50
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix connection to pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
The current code only use the QMetaObject of the type coming from the
function type to look up the signal id. But if the signal was casted
to a pointer to member function of a derived type, then we also need to
look in the base classes
Change-Id: Ib98fc38f63942946acb34d9f83c100991d58e4e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A new set of classes is introduced for iterating over the contents
of a container within a QVariant without knowing the exact type of
the container, but with the guarantee that the element type within
the container is a metatype.
The implementation of the iterable interface uses
the stl-compatible container API so that we can also iterate over stl
containers, or any other container which also conforms to stl norms.
This enables the functionality in the bug report.
Task-number: QTBUG-23566
Change-Id: I92a2f3458516de201b8f0e470982c4d030e8ac8b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patchs allows the user to convert defined QMetaType types like
MyType to be converted by using e.g. QVariant::toString(), mapping to
MyType::toString(). Also all the other QVariant::toXYZ() methods are
supported so far.
The patch adds static methods QMetaType::registerConverter supporting:
- implicit convertion
- conversion using member method of source type
- conversion using unary functor
Change-Id: I4f1db83d9c78bcc9df5c42f82f95cce0480cdcc3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When variadic templates and decltype are supported, detect the best
overload of operator() to call.
Currently, the code takes the type of the operator(), which requires that
the functor only has one, and that it has no template parameter.
This feature is required if we want to connect to c++1y generic lambda
(N3418)
Change-Id: Ifa957da6955ea39ab804b58f320da9f98ff47d63
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change the data type of PI from qreal to double, because qreal is defined as float and not as double on arm.
The testcase however expects PI to be a double value.
Change-Id: I003481071ecb2c1f54e6dcee9b450da2f1654969
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
While adding a test case for the new behavior, two issues
with the connectSlotsByName implementation came up:
1. for auto-connected slots that don't exactly match a signal,
a 'compatible' one is searched. There might be more than
one of those. The implementation randomly picks any.
2. The "No matching signal for %s" warning gets printed even for
slots that can never be connected via connectSlotsMyName
anyway (e.g. "on_something"). This is inconsistent.
This fixed both: an explicit warning is printed if more than one
'compatible' signal is found and the "No matching signal for %s"
warning is only printed if the slot adheres to the full
"on_child_signal()" naming convention.
In the process I added comments and changed the code slightly to
make it more readable and explicitly hint at non-obvious behavior.
Change-Id: Icc8e3b9936188d2da8dfff9f0373c8e5c776eb14
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
tst_QSharedMemory::simpleProcessProducerConsumer is on the top list of
unstable autotests. Disabling it for now.
Task-number: QTBUG-25655
Change-Id: Ib297b3382b736794bab6cdb668103bef74a55d8c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We do not currently have shared memory or system semaphore support
on Android.
Change-Id: I8e8f3fc6ff8d6de0333002c3e1b31cf070416dbd
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Android is not a proper Linux, and in particular it does not have
pthread_yield().
Change-Id: Ibf94cfacdc24d0c3baaef002c64f9f50c72c01d2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
QMetaObject::connectSlotsByName(QObject* o) creates a list of all
children to look for signals that match slots of o. This changeset
simply adds the object o itself to that list.
The motivation is to finally fix the long standing QtCreator bug
QTCREATORBUG-6494. Where executing 'Go to slot...' and choosing
'accepted()' for a simple QDialog named 'MyDialog' will add a
on_MyDialog_accepted() slot to MyDialog. That slot never gets
connected. More details may be found in the linked QTBUG-7595.
Task-number: QTBUG-7595
Task-number: QTCREATORBUG-6494
Change-Id: I35f52761791af697eabb569adb5faee6fae50638
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
I changed the existing test-case code to make it more scalable
in terms of adding more connectSlotsByName related tests. The
old "manual list of ints"-method was really not developer friendly.
This is a preparation for a subsequent modification of
connectSlotsByName behavior.
Change-Id: Ib760e52631ce4b5ae2a3ebdb4854849ff6c93bfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QSharedMemory and QSystemSemaphore are not available on QNX so the autotests can not be built.
Change-Id: Ibfb405f951d21342d64bf215cedc203a8cefe070
Reviewed-by: Wolfgang Bremer <wbremer@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This avoids crashes accessing deleted memory when creating a QObject
after the last QObject had been deleted, like a qDebug() in global
destructors.
==41000== Invalid read of size 4
==41000== at 0x5F01ED5: bool QBasicAtomicOps<4>::ref<int>(int&) (qatomic_x86.h:208)
==41000== by 0x5F01309: QBasicAtomicInteger<int>::ref() (qbasicatomic.h:147)
==41000== by 0x5F24051: QThreadData::ref() (qthread.cpp:100)
==41000== by 0x614A984: QObject::QObject(QObject*) (qobject.cpp:681)
==41000== Address 0x6ee73f0 is 0 bytes inside a block of size 152 free'd
==41000== at 0x4A0736C: operator delete(void*) (vg_replace_malloc.c:480)
==41000== by 0x5F240BF: QThreadData::deref() (qthread.cpp:109)
==41000== by 0x6113F6B: QCoreApplicationData::~QCoreApplicationData() (qcoreapplication.cpp:268)
The comment right above the change in qthread.cpp looks eerily similar
to the problem I'm trying to fix. However, the actual change that
introduced the change is not in the Qt public history, so we can't
know for sure what the problem was then.
Change-Id: I0dba895b041fe6cf81e6f8939ca85035cd00aad1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes QMetaType detection of const reference arguments in signals
while connecting using the new syntax and Qt::QueuedConnection
const references should have the same QMetaType as non references.
That means we need to remove the const reference while getting the
QMetaType.
Change-Id: I9b2688da7fb9ae985aec0d8fa62a1165357ffe71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This is possible with QWeakPointer, so allow it for migrating
code too.
In the process, replace the QPointerBase with a member variable for
simplicity. The functionality of the QPointerBase is replaced
by a TypeSelector template.
Change-Id: I3b4c77bdeda2b863cc33e84a3da8a25bae928c8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
VxWorks does not have QProcess support.
Change-Id: I917b769f967e9d71ec5025aae788f3e237b07aeb
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
(cherry picked from commit 416e73a0fc)
Unlike the previous implementation, this implementation is locked:
only one initialisation is ever run at the same time. It is
exception-safe, meaning that a throwing constructor will restart the
process.
Also, start using the thread-safe behaviour that GCC has offered for a
long time and C++11 requires.
Change-Id: I20db44f57d258923df64c0051358fd0d9a5ccd51
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Drop the read and write permissions for group and other users in the
system.
Change-Id: I8fc753f09126651af3fb82df3049050f0b14e876
Reviewed-by: Richard J. Moore <rich@kde.org>
This test runs fine almost all of the time on systems with 1
processor, which were the norm when the test was written and are still
the way that the Qt Continuous Integration system works as of
today. But it falls flatly on multi-processor systems.
The root of the problem is that QSystemSemaphore recreates the
semaphore if it disappears underneath it. However, the recreation
process is not thread-safe at all: if two threads race to recreate it,
weird things might happen. strace on Linux shows that a thread got
stuck trying to acquire the semaphore:
<... nanosleep resumed> NULL) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
semget(0x51001388, 1, IPC_CREAT|IPC_EXCL|0600) = -1 EEXIST (File exists)
semget(0x51001388, 1, IPC_CREAT|0600) = 114786308
semop(114786308, {{0, -1, SEM_UNDO}}, 1 <unfinished ...>
This problem does not happen if the creation and destruction of the
QSharedMemory (which uses QSystemSemaphore) does not race with other
threads or processes attaching and detaching. For the threads test
it's easy. For the processes, we use stdin and stdout as a
communication channel.
Change-Id: Ie11b135431d4abfc59234654848b67f622eb03c9
Reviewed-by: Richard J. Moore <rich@kde.org>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I54523eb854619917123d8816d3cd6c3a1f5b4c55
Reviewed-by: David Faure <david.faure@kdab.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When disconnect()ing through a QMetaObject::Connection, if the
QObjectPrivate::Connection contains a slot object, deref it, so
that it will be destroyed before the next run of cleanConnectionList.
Previously, a copy of the functor passed to connect() was kept until
QObjectPrivate::cleanConnectionLists was called (by adding a new signal,
or the sender was destroyed), even after a successful call to
disconnect(). That is, we were keeping that copy allocated without
any good reason.
Change-Id: Ie6074ea797df1611cb995dec07c5b5a742360833
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The QObjectPrivate::Connection refcount was not decreased
when disconnect()ing, therefore it was kept alive by the
owning QMetaObject::Connection object.
This removes a leak in case the QMetaObject::Connection
survives the sender object, after a successful disconnect().
Change-Id: Ie2ea59b269a0e589ae23c1457df7533be77c0797
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
More QVERIFY()s were added in the meanwhile to the test function,
so we can drop this one.
Change-Id: If6f137f45ba606b61d6a7004556a667ed316b61f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When compiling qmetatype auto tests with msvc2008 64-bit, I receive:
qmetatype.h(383) : fatal error C1128: number of sections exceeded
object file format limit : compile with /bigobj
This patch follows that advice and adds /bigobj to QMAKE_CXXFLAGS.
Change-Id: I05b3cf9dfdb6a93649c692e2df22365d200e6f2f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Macros should call QSKIP instead of creating a semi-empty function body.
Change-Id: I389701f618fe9bf0a40aa26f161620389a80e407
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
As the script dependency for that autotest is not really needed it should
be moved to qtbase.
Task-number: QTBUG-27706
Change-Id: Ieda8b2182a20a77f53a0be9878e82e3236c79c2b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
As CI runs autotests using the "check" target the approach using
DESTDIR = ../ does not work for the test. Instead the binaries are just
moved one directory up and QFINDTESTDATA is used to find the path of the
helper binary.
Change-Id: If1ed2b60821f1de4ac62f238c8af5e09cf0f444a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Before, the functor slot (or lambda expression) had to have the same amount
of arguments as the signal.
This shown to be a big problem to be able to connect to signals that had
a QPrivateSlot.
This implementation use the type of the operator() of the functor to
know how many arguments we have.
As a bonus, we also can check the arguments in a static assert.
The test comes from https://codereview.qt-project.org/#change,38703
But this patch also works without variadic template
If the compiler does not support decltype, we workaround the lack of it
by using another level of indirection.
Change-Id: I9850b43e8caf77356a2ec3f4c0b0ed532d96029e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Pointer to const member function have a different signature, and hence
need their own traits code.
Change-Id: Ie4b2434a412f412444fb07ef1388a37cab105ecd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As the script dependency for that autotest is not really needed it should
be moved to qtbase.
Task-number: QTBUG-27705
Change-Id: I4ce0d34aca97cadd79b157b0f7c90c406bed4295
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There are more opportunities in QtCore and the rest of Qt to make signals
private instead of public. This is a test-dart to see if there is any
reason not to do this.
It would be nice to make QObject::destroyed private, but as it has a
default argument it would be source incompatible to anyone connecting
to the SIGNAL(destroyed()) instead of SIGNAL(destroyed(QObject*)).
Currently the function-pointer-based connect syntax does not accept
a functor (or lambda) with a different number of arguments than the
signal. Olivier says a fix for that might come in 5.1, but for now
the qfiledialog2 test is changed to not use that anymore.
Also, the function pointer for a private signal can not be assigned to
a local variable, so the qmetamethod test is changed to not do so
anymore.
Change-Id: Iaf776b822f9ba364f2c184df0c6b23811da56e44
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead omit the whole test when Q_OS_UNIX is not defined.
Change-Id: If0ee3345c25f6b1baa38845edfd08ec26a45d6f2
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_WIN is defined since
the test is invalid on this platform.
Change-Id: Idb77df96b0c2a223cddbfffb4e24c6d1f5d33dfb
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The TRUE and FALSE macros are obsolete and should be replaced with
true and false (all lower case) respectively.
Change-Id: Iee352e8173500683e6319be0abbf5bacf29016e0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fills the gap left by QWidgetStar, making the sequence
between FirstCoreType and LastCoreType contiguous, which some
benchmarks assume to be true anyway.
Change-Id: I2d5d202b6246a9065fdf77f325a4a04279dbe4b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This test was using some QSpinBox instances to generate signals for
testing. Use our own QtTestObject to generate the signals instead.
Change-Id: I3714955ae040d541c3b613a478945c38a18be18d
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
When containing a QObject (or sub-class) pointer and trying to convert
to a QObject pointer canConvert() did dereference the pointer without
checking for it being null.
Change-Id: Ie274e54f2f817f2b6c5df64504f8af6359b8f38d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows to check whether QMetaTypeId2::MetaType exists, and can help
turn run-time into compile-time expressions, even without constexpr support,
or in situations where constexpr can't be used (because you can't overload
on it). This was designed for the QMetaType::registerConversion feature,
but it's much more widely applicable.
Change-Id: Iafa04add04bcb531b3f7fe3e751c7e91ee6a3bc0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Also check the return value of
DefaultValueFactory<QMetaType::Void>::create(), the same way it's
done in testCreateHelper<QMetaType::Void>().
Change-Id: I3e6d7fca4ea74dbe65009f2eb2c64a1b3a370d68
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a simplified port of KDTools' KDAB_SET_OBJECT_NAME.
It simply assigns the variable name as the objectName of
a QObject, uic-style. It uses a small helper function so
that it works on references as well as pointer variables.
QLabel label;
QLabel *pLabel = new QLabel();
Q_SET_OBJECT_NAME(label);
Q_SET_OBJECT_NAME(pLabel);
Change-Id: I25fec0c90f33249a3ea5d2dd622ab708019fd101
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This makes development on the meta type system easier because only
QtCore must be re-built to run most of the tests. The existing
QGuiVariant test needs to be run before pushing anyway, but not
so frequently.
Change-Id: I1fa66edbd790c957e1a232226847dd550227a477
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The type needs to be large enough that
QVariantIntegrator<T>::CanUseInternalSpace is true.
Change-Id: I311c44bedfebd946e41639975df206c27b6d55ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
For consistency with qMetaTypeId, and because we can.
Change-Id: I6882a16ef3c0d84539048c9f2c201c4a2b2ca7ad
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This allows building the QVariant tests without the QtWidgets module.
Change-Id: I7cd7e78a60c7bc7614ec16df1abe1e93e45d4923
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Type traits can not be changed durring Qt5 life time.
Change-Id: If69f65ff2113c901580afee91b11ae1b11c13a4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is accomplished by introducing dependencies to catalogs.
This requires one API change:
QTranslator::load(const uchar *, int);
changes to
QTranslator::load(const uchar*, int len,
const QString &directory = QString());
Since now, even the load from memory might need a directory if
the memory block contains a qm file with dependencies.
Change-Id: I781f333d07f53bb431d0a7b5fa1abe282dc4d338
Task-number: QTBUG-26138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
This will make it possible (in Qt 6) to remove the enums listing
metatype ids. As it is constexpr, it can be used in switch statements
just like enums, as enum values, and as template specialization values.
Change-Id: I51293674c403714e34cb8a8b8953522fc97a740a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
canConvert() and convert() use the metaobject to convert such types.
Change-Id: Ic05e74c5c2423b4b9682b88adc856a16dcba4cff
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This will allow conversion between pointers to compatible QObject
derived types.
Change-Id: I19e08934571fb3f1b91e594892214041fe5f6a11
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This allows QVariant/QMetaType software (such as QtDeclarative) to
deal with smart pointers in a similar way to how they can deal with
naked pointers (accessing properties etc).
This also adds a requirement that T be fully defined when
QSharedPointer<T> is inserted into a QVariant.
Change-Id: I29e12b8a6aa5f4aadbd62f92b89bc238f64b5725
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The T must be derived from QObject, or it will fail to compile.
This will allow scripting or other 'wrapping' and runtime environments like
QtDeclarative to handle QSharedPointers to types derived from QObject
properly. A QSharedPointer<T> can be inserted into a QVariant, and
where T derives from QObject, a QSharedPointer<QObject> can be
extracted from the QVariant, and its properties are then accessible.
Change-Id: I68d6d89aceceb019267bd7301baa2047f9c09b90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Verify that this produces a warning containing the relevant typename.
Change-Id: I046c02585e410a211e9175600b1027dda83bdd9c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QSharedPointer doesn't work like the other automatic template metatype
declarations because in some cases T* is declared as a metatype, but we
are interested in QSharedPointer<T> (eg QObject*). In other cases, T is
declared as a metatype and we are interested
in QSharedPointer<T> (eg char).
In particular the macro used before this patch was attempting to get the
metatype id of the element_type using for example qMetaTypeId<QObject>()
instead of qMetaTypeId<QObject*>(), which did not work.
Similarly, the variadic macro driven test is no good, because it was
testing QSharedPointer<QObject*> instead of QSharedPointer<QObject>,
so that is removed.
In the end, the only thing we can sensibly automatically declare as
metatypes are QSharedPointers to QObject derived types. That is also
the type that makes the most sense in a QML context anyway.
Change-Id: I13dd40147e2e6bedf38661f898102abaaaa96208
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Containers are auto-registered and use normalized names.
Change-Id: Id65c3940401f69436929220e1f6a971135e147ed
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Internally, QObject and QMetaObject already leave out non-signal
methods when working with signals. This is possible because the
signals always come before other types of meta-method in the
meta-object data. Ignoring irrelevant methods is faster and can
save memory.
QMetaObject provides internal indexed-based connect() and
disconnect() functions. However, these functions currently take an
absolute method index as the signal specifier, instead of an
absolute _signal_ index. Hence, QMetaObject and friends must convert
from the method index range to the signal index range.
By providing an API that only considers signal indices, clients of
the index-based QMetaObject::connect()/disconnect() can provide the
proper signal index directly. Similarly, for the qtdeclarative
integration (QDeclarativeData hooks) the signal index can be passed
directly. This will eliminate most of the conversions back and forth
between signal index and method index, and some other redundant work
done by qtdeclarative's custom connection implementation.
There are some places where the behavior can't be changed; for
example, QObject::senderSignalIndex() will still need to return an
index in the method range, since that function is public API.
Changing QMetaObject::connect()/disconnect() to take an index in
the signal range will be done in a separate commit; this commit is
only an enabler for porting existing usage of those functions to
the new behavior.
Change-Id: Icb475b6bbdccc74b4e7ee5bf72b944b47159cebd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
MSVC2010 32-bit (with and without service pack 1) takes about 1 hour to
compile this file in some builds, since
1c7421ad14.
Avoid the relevant portion of the code just for these compilers.
Change-Id: Icbb4fa12a6d563a7cdc882c30cdb5705675bedb0
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
QIcon has been moved back from QWidget to QtGui, so the QIcon QVariant
and QMetaType handler can now be moved back to QtGui.
Also we can give back QIcon its old number, allowing to get rid of some
compatibility hack when unstreaming QVariant
Change-Id: I439d5c2987c06ecd619f394407850f678164afb8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This completes the transition from connectNotify(const char *) and
disconnectNotify(const char *) to the new QMetaMethod-based
functions.
Removed the old connectNotify autotests and renamed the
connectNotifyMethodXXX autotests to connectNotify, since there is
no longer any ambiguity about which overload is being tested.
Change-Id: Icf108a80177155f21bb73c165fb8ab5d4e997bc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
C++ distinguish between "char", "signed char" and
"unsigned char", they are three independent types.
Fix QVariant behavior on ARM. On ARM "char" may mean
"unsigned char", but we depends on the sign during
a numerical conversions.
Change-Id: I610ce3fb88ed5964b67f3ae442d264fe16b2d261
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.
If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.
Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This is much more performant than calling QObject::receivers(const char*)
Can be used instead of connectNotify in some cases.
Change-Id: I19e0933f678f171f515d9a0f69f0ad4fb7d894b4
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reimplementations of connectNotify() and disconnectNotify() can
assume that the signal argument is in normalized form, but after the
introduction of the Qt5 meta-object format, it could happen that it's
not.
The problem is that the internal QArgumentType class, which attempts
to resolve a typename to a type id, was calling QMetaType::type().
QMetaType::type() falls back to trying the normalized form of the
typename if the original argument can't be resolved as a type (this
behavior isn't documented, but that's how it works). This means that
e.g. QMetaType::type("const QString &") returns QMetaType::QString.
Since QMetaObjectPrivate::indexOfMethodRelative() (more specifically,
the methodMatch() helper function) prefers to compare type ids
over typenames (since the type ids are stored directly in the meta-
object data for built-in types), the method lookup would *succeed*
for signatures with non-normalized built-in typenames as parameters.
QObject::connect() would then think that it did not have to
normalize the signature (see "// check for normalized signatures").
The consequence was that the original, non-normalized form got
passed to connectNotify().
This commit introduces an internal typename-to-type function that
is the same as QMetaType::type(), except it doesn't try to normalize
the name. This way, the only place where normalization can occur in
the signature-to-meta-method processing is through the calls to
QMetaObject::normalizedSignature() in QObject::connect() itself.
The implication is that there are now cases where the method
signature will be decoded and processed twice, where processing it
once was sufficient before. On the other hand, it is consistent with
the pre-Qt5-meta-object behavior, where we predict that the
signature is already normalized, and only perform (comparatively
costly) normalization if the initial lookup fails.
Change-Id: Ie6b60f60b0f9a57ebd378d980329dac62d57bbd9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
static_metacall was never set on the metaobject written by
QMetaObjectBuilder::fromRelocatableData, sometimes causing a crash. It
should be initialized to 0.
Change-Id: I79373d895e131f0cc2ff1af6d2177a0c1a282be7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Given a member function that's a signal, returns the corresponding
QMetaMethod. Inspired by the implementation of the template-based
QObject::connect().
The primary use case for this function is to have an effective and
exact (not subject to shadowing) way of checking whether a known
signal was connected to in reimplementations of
QObject::connectNotify(QMetaMethod), avoiding string comparisons.
Example:
void MyObject::connectNotify(const QMetaMethod &signal)
{
if (signal == QMetaMethod::fromSignal(&MyObject::mySignal)) {
// Someone connected to mySignal ...
}
}
Change-Id: I5e4de434275fe543c004d569dcaa9ceda3442f03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QMetaObjectExtraData was added when support for QMetaObject::newInstance
was added. One needed a place to put the pointer to static_metacall in
the QMetaObject.
But as we break binary compatibility, one can change the size of
QMetaObject, and put everything back inside QMetaObject's own structure.
Meaning it is not required anymore to have one QMetaObjectExtraData
instance per QMetaObject anymore.
Change-Id: If0b8f586cbaf633eed10045adee3ba3366826c86
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is done in preparation of introducing the
QObject::connectNotify(QMetaMethod) function. Together with the
forthcoming QMetaMethod::fromSignal() function, which returns the
QMetaMethod corresponding to a Qt/C++ signal (member function), the
comparison operators provide an effective way of checking which
signal was connected to.
Change-Id: I2de48628c4884a7174fb8574895f272cb3fe5634
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
These warnings are expected and correct, so ignore them.
Change-Id: I43931950e46bd3c931db869902574ee7219efa1d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Adjust the test because we don't read past the end anymore.
Task-number: QTBUG-25108
Change-Id: I8243f1d5ae79d1256aab2cb1132598a716a7eeeb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The constructor is wrong, it creates instance of QVariant encapsulating
a QColor instance. QVariant should not implicitly convert data, never.
Change-Id: Idc794ecdecb42d8b53fee3f993bf51ddd43f595d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
That change also fix moduleForType() which was wrongly recognizing
negative ids as belonging to Core.
New tests were added.
Change-Id: I40a5819effb32489a45937011980457387c9f8be
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This test is like qguieventdispatcher, it duplicates a corelib test in
the gui test suite, since the QtGui library often gets a different event
dispatcher implementation from the platform plugin.
Change-Id: Ifd724066950bc3b98a804bc2e5d40ce7b0429af4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
That was a regression introduced in 1c5db1aff
Example:
signals: int *someSignal();
would produce this code:
int* _t0 = int*();
which does not compile
So have special handling for pointer to change it to '= 0'
Change-Id: Ie695e15e309d15c3cfd5c5a69ac8bf6d61ae9915
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is an extension coming from the use case when you, for instance, need to
implement a countdown timer in client codes, and manually maintain a dedicated
variable for counting down with the help of yet another Timer. There might be
other use cases as well. The returned value is meant to be in milliseconds, as
the method documentation says, since it is reasonable, and consistent with the
rest (ie. the interval accessor).
The elapsed time is already being tracked inside the event dispatcher, thus the
effort is only exposing that for all platforms supported according to the
desired timer identifier, and propagating up to the QTimer public API. It is
done by using the QTimerInfoList class in the glib and unix dispatchers, and the
WinTimeInfo struct for the windows dispatcher.
It might be a good idea to to establish a QWinTimerInfo
(qtimerinfo_win{_p.h,cpp}) in the future for resembling the interface for
windows with the glib/unix management so that it would be consistent. That would
mean abstracting out a base class (~interface) for the timer info classes.
Something like that QAbstractTimerInfo.
Test: Build test only on (Arch)Linux, Windows and Mac. I have also run the unit
tests and they passed as well.
Change-Id: Ie37b3aff909313ebc92e511e27d029abb070f110
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Callers should just call the standard allocation functions directly.
Adding an extra function call onto all basic memory management for the sake of
making it instrumentable in rare cases isn't really fair to everyone else.
What's more, this wasn't completely reliable, as not everything was using them
in a number of places. Memory management can still be overridden using tricks
like LD_PRELOAD if needed.
Their aligned equivilents cannot be deprecated, as no standard equivilents
exist, although investigation into posix_memalign(3) is a possibility
for the future.
Change-Id: Ic5f74b14be33f8bc188fe7236c55e15c36a23fc7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This makes it more useful in all the Qt apps that don't set it,
given that it's used internally by QTemporaryFile, QTemporaryDir,
QStandardPaths, QDBus, QAccessibleApplication, etc.
Qt4 compatibility in the deprecated QDesktopServices is preserved,
no fallback there.
Change-Id: I584463507cf917a3720793c6bd45d07c60f8356c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There isn't really a need for the dependency as LanguageChange events can be
caught in QObject::eventFilter, directly.
Change-Id: I39778fbe1663924d97705b514ae399cfd3749776
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For all practical purposes, the fallback introduced here returns the
desired value. Having a fallback enables unconditional use of Q_ALIGNOF.
For compilers that provide native support for it, Q_ALIGNOF is otherwise
#defined in qcompilerdetection.h.
Change-Id: Ie148ca8936cbbf8b80fe87771a14797c39a9d30c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We are running out of type ids for built-in types, 255 is not enough.
QMetaType already contains about ~70 types, situation is maybe not
tragic now, but there is a great chance that we will want to add more
built-in types from different modules like jsondb or declarative. Then
it might be tight, because we are not allowed to reorganize type ids
(it would be a binary incompatible change).
This change was not possible up to now. Old moc generated code assumes
that type id can be safely stored in 8 bits.
This is source compatible change.
Change-Id: Iec600adf6b6196a9f3f06ca6d865911084390cc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
- Fixed path was failing to find sub program.
Change-Id: I86f1a6941e244c9bc25ad0441cc7a441607560b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For Qt5 we no longer want to support the older revisions due to the
dual codepaths that must be maintained, and because the format of the
meta-object data is quite different in revision 7.
The dual codepaths have been replaced by asserts that indicate the
revision in which the feature was introduced, and the older-revision
fallbacks have been removed.
It's not possible to build code generated by moc that has
revision <= 6 with Qt5 because the type of the
QMetaObject::stringdata member changed from const char * to const
QByteArrayData *. For the same reason it's not possible to build a
dynamic meta-object generator targeting revision <= 6 with Qt5.
Hence, too old meta-objects will be caught at compile time, and the
code will have to be ported to generate revision 7 (e.g., by running
Qt5's moc on the original class declaration).
Change-Id: I33f05878a2d3ee3de53fc7009f7a367f55c25e36
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaMethod::typeName() is documented to return an empty string if
the return type is void. But after the introduction of
QMetaType::UnknownType (where void was made a distinct type),
returning an empty string causes the idiom
QMetaType::type(method.typeName())
to break; the result will be QMetaType::UnknownType rather than
the expected QMetaType::Void for methods that return void.
New code should use the new function QMetaMethod::returnType()
instead, but it would be good if existing code still did the right
thing.
The consequence of returning "void" instead of an empty string is
that it breaks existing logic that uses the typeName() length to
determine whether a method returns void. But we judge this as the
lesser of the two evils; it's better to have a typeName() function
that is consistent and keeps the QMetaType::type(method.typeName())
idiom working, than to force the typeName() inconsistency for void
only to keep code that does "strlen(method.typeName()) == 0"
working.
The places in Qt that were relying on a zero-length typeName()
(testlib, dbus, declarative) have already been changed to use
returnType().
Also adapt QMetaObjectBuilder, which is internal API.
Change-Id: I70249174029811c5b5d2a08c24b6db33b3723d19
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Since the introduction of QMetaType::UnknownType, void is a proper
meta-type, and the normalized form of "void" should be "void", not
an empty string.
Add more tests to ensure that we do remove "void" in the one case
where it actually should be removed (e.g. "foo(void)").
Change-Id: I72dc2d24da67cf52da00c678f50213cff1b92e25
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This actually involved tiding up QObject sources a little bit
to clearly separate QString / QRegExp overloads of findChildren.
The corresponding qFindChildren overload for MSVC 6 compatibiltiy
was *not* added.
Change-Id: I84826b3df9275a9bda03608a5b66756890eda6f8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QVariant handlers can not be unregistered. We are not able to guarantee
that such operation is safe and we do not want to.
Change-Id: Id9a12e6a8c750110e4a08eab1de3e07e5c408675
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch changes invalid QVariant qDebug stream value from
"QVariant(, QVariant::Invalid)" to "QVariant(Invalid)"
New tests were added.
Change-Id: Ia57d4fc2d775cc9fce28e03eba402c2173845b35
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Make QJsonValue, QJsonObject, QJsonArray and QJsonDocument
first-class meta-types.
This is an enabler for a lightweight integration with QML.
Change-Id: I4725efdd2746cf97fd26d3632a99e8eee849f834
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These were not covered at all by tst_qmetatype.
Change-Id: Ic957470ac78b2c15fe449efe17e1f178a41c3690
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Removed the Q_DECLARE_METATYPE in favour of first-class support
inside QMetaType and QVariant.
Change-Id: I904236822bfab967dc0fbd4d4cc2bcb68c741adc
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Duplicated code was removed. As an side effect:
- one runtime flag check was replaced by a compile time check.
- is enum flag can be used together with built-in types.
Change-Id: I54173e7b07ce7e487d3cc21ba24dcccd28b5d049
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test was assuming that "data()" is a special function in autotests,
but that hasn't been the case since early prototypes of testlib.
Change-Id: Ic24cf5dc539b55d12eba0a6ab17173e2ed698f21
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Use const_cast to avoid "deprecated conversion from string constant to
'char*'" warning when building argv arrays from string literals.
- Use Q_UNUSED to avoid warnings on unused local variables.
Change-Id: Idd2c8279adc102b6ebc6af7486ba26fe9ed4e7c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Add Q_IS_ENUM() macro to determine if a given type is an
enumeration. Use information from that in QMetaType::registerType()
to store whether custom registered metatypes are enums or not.
This information can then be accessed by calling
QMetaType::typeFlags(int type). This is used by the declarative
code to determine whether a custom type in a variant can be safely
cast to an integer, which is required to allow passing non-local
enums as signal/slot params.
Change-Id: I9733837f56af201fa3017b4a22b761437a3c0de4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The function is public, so it should validate input instead of crashing
Change-Id: Id67463b0b61ab74a76c1ede7f052bdbed37822b6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The function is public, so it should validate input instead of crashing
Change-Id: Ifd9f1110f8631f942929d85db6a57eee7afffb6a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The function was crashing when an unsupported type id was given
as an input argument.
Change-Id: I2b0e3e6d43f6f248dc71532f8e6485efe68e8120
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes it possible to do things like
QVariant::fromValue(new SomeObject);
without first using Q_DECLARE_METATYPE(Something*)
This functionality was originally part of
http://codereview.qt-project.org/#change,11710 but was rejected
because the functionality was based on specialization of
QVariant::fromValue which could be dangerous.
This new implementation doesn't have such danger.
Change-Id: I83fe941b6984be54469bc6b9191f6eacaceaa036
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit is complimentary to the commit which introduced a similar
partial specialization for single template argument types:
6b4f8a68c8
If T and U are available as metatypes, then QHash<T, U> is too.
Change-Id: I09097b954666418b424c8c23577032beb814343a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaType::Void was ambiguous, it was pointing to a valid type (void)
and in the same time it was signaling errors in QMetaType. There was
no clean way to check if returned type was valid void or some
unregistered type.
This feature will be used by new QMetaObject revision which will
store type ids instead of type names. So it will be easy to
distinguish between:
void mySlot();
MyUnregisteredType mySlot();
Change-Id: I73ff097f75585a95e12df74d50c6f3141153e771
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Specialise QTypeInfo<QPair<T1,T2>> based on the properties of
T1 and T2:
- If either T1 or T2 is Q_COMPLEX_TYPE, so is QPair<T1,T2>.
- Otherwise, if either T1 or T2 is Q_MOVABLE_TYPE, so is QPair<T1,T2>.
- Otherwise, QPair<T1,T2> is Q_PRIMITIVE_TYPE.
Change-Id: I8aecbd37e3b7924f77f38967498deabf1a19ca24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This function matches QMetaMethod::parameterTypes().
The implementation of QMetaMethod::parameterTypes() was moved to a
helper function in QMetaObjectPrivate, so that it can be shared with
QMetaMethodBuilder.
Change-Id: I4361713996dc4ea31a79c2fc74c813ee5e9c3069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Up to and including meta-object revision 6, string data have been
stored as 0-terminated C-style strings, that were made directly
accessible as const char pointers through the public API
(QMetaMethod and friends).
This commit changes moc to generate an array of QByteArrayData
instead, and adapts the QObject kernel accordingly.
Generating an array of QByteArrayData (byte array literals)
means that the strings can now be returned from public (or private)
API as QByteArrays, rather than const char *, with zero allocation or
copying. Also, the string length is now computed at compile time
(it's part of the QByteArrayData).
This commit only changes the internal representation, and does
not affect existing public API. The actual (C) string data that the
byte array literals reference still consists of zero-terminated
strings. The benefit of having the QByteArrayData array will only
become apparent in the upcoming meta-object data format change, which
changes the format of property and method descriptors.
Support for the old meta-object string data format was kept; the
codepaths for old revisions (6 and below) will be removed in a
separate commit, once all the other meta-object changes are done and
affected code has been adapted accordingly.
Task-number: QTBUG-24154
Change-Id: I4ec3b363bbc31b8192e5d8915ef091c442c2efad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
moc is currently generating code to convert from a pointer to member
function of a slot or signal to its index.
The idea was that it could be usefull for slots to have the new syntax
do the same as the old one (connecting signal index to slot index). But
in practice, the new syntax do not use the IndexOfMethod for slots.
Also, it does not work for all the slots (no Q_PRIVATE_SLOT,
no static slots)
So since it is not used, and that it would take room in the binaries to
generate all the code to get the index of slots, we remove it.
If ever we need it, we can still add it later.
Change-Id: Ia417e3e524d7915ca86433ea86c66ac2b299c81a
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
See also e9015b3bc8.
Task-number: QTBUG-21168
Change-Id: I18fac1ac636fdc6b2aaee1b4cdfee9c4bc2a77ff
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
They create noise in the test results.
Change-Id: I40e7239ba7cd41bec577fe8220c86476553a6502
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This allows to drop or paste them into lineedits and text widgets
(including such widgets in non-Qt applications)
Implementation note: this is done on-demand rather than in setUrls
so that it's still possible to setText explicitely; the new code
is only a fallback for when no text/plain data is available.
Change-Id: Ie90c43a30bfa64a6047b627e7351d20bf5ec8e03
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Currently QMetaType API contains almost only static methods. This works
nice until someone needs more information or needs to do more operations
on a type. In this case every function call has to do type dispatch.
This API allows to avoid redundant type dispatching, by caching a
type information in a QMetaType instance. It gives significant
performance boost especially for custom types (up to 9x).
Change-Id: I223d066268402e072e41ca1d0a3e7bc160655d7f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
We should not assume that the first type id is 0.
Change-Id: I17ba6ba57e97ebd495904bfd11235fe458f214e5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This autotest checks that meta-methods can be properly inspected
(signature, return type, parameter types, etc.).
Change-Id: I13dc75ec5123280e94ec738dade3f54e427fdbaa
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Do not mark with insignificant_test anymore.
Task-number: QTBUG-22747
Change-Id: I4ef6d5d7e1189b03fd1ab812a0839e3709686e1b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
For template-based connect(), the meta-object is resolved at
compile-time (the virtual metaObject() function isn't called).
But we can make it work by copying the members of the dynamically
constructed meta-object to the statically defined one.
Change-Id: Ia4d3263a89008e36e187c584db6d25d9042f32b3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
moc supports it, so qmetaobjectbuilder should too.
Change-Id: I01475794e928b5a1b659f0dab044933948186971
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Socket notifier behavior is very OS-dependent. QtNetwork uses non-
immediately (it will return -1 w/ errno=EINPROGRESS). We have to wait
with select(2) to indicate that the connection is ready, then call
connect(2) again. When this happens, we need another call to select(2)
to get notification on the listening socket so that we can call
accept(2) to complete the connection.
The mixingWithTimers() failure happens due to the test expecting a
single processEvents() call to be able to completely connect a TCP
socket. But as described above, this may not happen. The test should
QTRY_COMPARE() to give the test a chance to let all this happen.
The posixSockets() test can fail due to the same connect() behavior. The
test already has a comment about the write notifier behavior being very
OS dependent. This caused the first enterLoop() to return too early,
before the read notifier fired (which is what the test is checking for,
that the read notifier fired). Move creation of the write notifier to
where we expect it to fire, just before writing to the posix socket.
In the same test, the read notifier inside QTcpSocket may not fire after
the write notifier on the posix socket. Use the waitForReadyRead()
function to give the socket a chance to read the data written to the
posix socket.
Change-Id: I541e6ee9a39a92ce3acf6b9ffee51079febe43e4
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The test was failing at:
QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());
The CustomType* metatype was not registered before this part of the
test.
qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered. However, the order of evaluation of
these two expressions in the above statement is technically undefined.
Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.
Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
QMetaObject::invokeMethod attempts to deference the extradata for
meta objects versions 6 and greater which is causing a crash in some
of the qtquick1 tests.
Change-Id: If5b2ca83b15de2cd558976c6b681dd5457c404d1
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
QMetaType used to register a typeName and factory functions for
creation/destruction of objects. While it would be possible for a single
type name to be registered matching different actual types and memory
layouts, there was little that could be done about it.
Now that QMetaType is tracking type information with a direct impact on
data layout and ABI (size and type flags) it is important that we check
and detect binary incompatibilities as early as possible.
[Such incompatibilities could arise from type name re-use (technically,
ODR violations) or, more commonly, as version mismatch between different
shared libraries or plugins.]
Only type size and flags are checked as function pointers to inline and
template or otherwise non-exported functions could trivially differ
across translation units and shared libraries.
When registering typedef types, a check is made to ensure the same name
doesn't get registered as different types.
Change-Id: I8211c3de75d4854ce8fafdb620d3a931c206e0c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The function hasn't been working properly. It was not well tested, for
example it is undefined how QVariant should behave if it contains an
instance of an unregistered type.
Concept of unregistering types was inspired by plug-in system, but in
most supported platforms we do not unload plug-ins.
Idea of type unregistering may block optimizations in meta object
system, because it would be not possible to cache a type id.
QMetaType::type() could return different ids for the same name.
Currently QMetaType::unregisterType() is not used in Qt.
Change-Id: I878b6e8d91de99f9bcefeab73af2e2ba0bd0cba0
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
qmetaobjectbuilder should generate meta-objects of the same version
as moc; in the future, when the moc version is bumped, QMOB has to
be adapted at the same time.
QMOB was generating version 4 meta-objects. This patch makes it
generate version 6 (the current version). This also fixes a bug with
using qt_static_metacall with QMOB (setStaticMetacallFunction()); it
was already using the version 6 qt_static_metacall signature, which
isn't compatible with version 4.
Also add tests that ensure that the QMOB-generated meta-object works
with real objects; in particular we want to test the codepaths in Qt
that check for version >= 4.
Change-Id: I64a151ea5c947a6f8b7a00e85a39866446c735e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
A feature of a ref-counted quit (managed by a quit-lock class)
is added to both QEventLoop and QCoreApplication.
This allows, for example, an event loop to quit() when there is
no more work for it to do.
quitOnLastWindowClosed is implemented in terms of the refcount in
QCoreApplication so that jobs can be completed before the
application quits.
Change-Id: I14c8f4e7ee12bbf81a6e5849290d4c8ff37fa110
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Commit 4b8ceb41ae added the requirement
that pointed-to types need to be registered when registering pointer
types. Unfortunately, the implementation also affects function pointer
types.
This change whitelists 0, 1, 2 and 3 argument functions as not deriving
from QObject, forgoing the need to workaround details of the type
registration implementation when registering those function pointer
types.
Change-Id: I4d855e9d70a8179a6e31b84623ad5bf063e0d6d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QVariant::UserType does not correspond to an actual type named
"UserType". This logic didn't make sense.
Change-Id: I369911e514f7902fc863cb05174011d6fc15c447
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In QMetaType "void" is a regular type, lack of c++ sizeof operator
force us to write a template specialization for the type.
Change-Id: I9a56e135223b416b8031836d29ef33ef3fb750e4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
These types don't exist anymore, so it's pointless to check for them.
Also remove the dead types from uic's type-to-header map.
Change-Id: I7f0af5c337859f3da1c103157a802bbe5372df9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some objects expect connectNotify to be called in order the signal to be
emitted.
Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If T is defined as a metatype, then QList<T> is too automatically.
So for example, no need to use
Q_DECLARE_METATYPE(QList<int>)
anymore.
This is a source compatible change.
Change-Id: I2ee8a7b9e28fe6d4775f6a05cce39aca8563e0c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
There is no reason to keep two separated core types sets. It
couldn't be fixed before Qt5 because of binary compatibility promise.
This patch merges QMetaType core types with ext core types.
This "simple" operation consists of:
- QDataStream version was incremented, because type ids are
saved in QVariant's data stream.
- QMetaType LastExtCoreType and FirstExtCoreType were replaced by
LastCoreType, FirstCoreType and new QMetaType::HighestInternalId.
- New tests checking QVariant data stream for Qt4 and for Qt5 versions
were added.
Change-Id: I02dd74d29317365c297a789a4eb7c9c5edc3b231
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QMetaType::QVariant has existed as a proper type for almost two
years, but the qvariant_nameToType function was written in 2006.
Using QMetaType::QVariant means QVariant can be treated just like
any other type. We can get rid of those hacky checks for LastType,
and the remaining checks become more readable.
The fact that QMetaProperty::{type,userType}() returned LastType
(0xffffffff) for QVariants was never documented (LastType itself is
internal). But there are other Qt modules that assume so. I'll fix
the ones I know about (qtdeclarative, qtscript, activeqt).
Change-Id: I799b9079bb8bbb1fe76c132525440b30415cbac5
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is a source incompatible change for Q_DECLARE_METATYPE(T*),
which now requires T to be fully defined.
The consequences of this are:
* Forward declared types can no longer be declared as a metatype.
(though this is a very uncommon thing to do).
There is a trivial workaround where necessary.
Change-Id: Id74c40088b8c0b466fcd7c55abd616f69acc82c8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The C++ standard says that the comparison between pointer to virtual
function is unspecified (C++11 $5.10.2)
But we still may rely on it for the Qt::UniqueConnection and the
disconnection
So test if it works while using the same function.
Using function from different classes works for me, but we should
probably not assume it works. I left it commented in the test for
reference.
Change-Id: I1d9b91d4cc1a424d4f43ef2ee4981b8573f1e86f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
New implementation fixes some commented code marked as FIXME.
Change-Id: If8f5bebedd65bcf8f839d804c2022ca79ef82ddf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're trying to deprecate these, so don't use them anymore.
The inline uses of these have been left intact, for the moment. Inline code will
need to create their own non-inline allocation methods (for future-proofing to
allow alterations in how e.g. individual containers allocate)
Change-Id: I1071a487c25e95b7bb81a3327b20c5481fb5ed22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QVariant implementation is based on delegation to a handler. The handler
has rather simple construction, it is a set of function that implements
a switch statement over known types and redirects calls to a right
method of an encapsulated types instance. Unfortunately after qt
modularization project, it is not easy to use types directly from
different modules, as they can be undefined or completely unaccessible.
Which means that each module has to implement own handler to cooperate
correctly with QVariant. We can suspect that list of modules known to
QVariant will grow and it is not limited to GUI, Widgets and Core,
therefore it would be nice to have an unified, from performance and
source code point of view, way of working with handlers.
This patch is an attempt to cleanup handlers. Keynotes:
- Each handler is working only on types defined in the same module
- Core handler implements handling of primitive types too
- Custom types have an own handler
- Each handler is independent which means that dispatch between handlers
is done on QVariant level
- Handlers might be registered / unregistered using same interface
Change-Id: Ib096df65e2c4ce464bc7a684aade5af7d1264c24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The value is changed to true. It is a common bug that developers expect
this proxy model to reflect the source model when the source changes.
That requires setDynamicSortFilter(true), so we change the default to
optimize for the common case.
Change-Id: I9bf7efdbda10309fa77aed9391c33054aaae4a29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
After 8fd64d22ac (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.
This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.
Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.
Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The test was skipped, but still tried to compile code that uses
exceptions. The throwing class it uses was conditionally compiled
out earlier in the file, causing an error for undefined class.
Task-number: QTBUG-23028
Change-Id: Ia2e05a8a0abbf0e913f6c41e85bfee8b85cbc8a5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
For some strange reason "Object::method ..." was printed, without
the leading Q.
Change-Id: I10b99e8aa8730e4020d15b3e04a01004bade76c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On Windows, the signalbug.exe could not be launched since it is
not next to tst_qobject.exe, which is in one of the
'release', 'debug' subfolders.
Introduce a subdirectory structure similar to that of
the QProcess test and use QFINDTESTDATA to locate it.
Change-Id: Ie8f2ede8cb76f22a908cb77517a74076be11fbb7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is sent when the object's name changes.
tst_moc must be updated since the method count of QObject has changed.
The test assumed that there were 4 invokable methods in QObject. The
new signal is the 5th, which breaks the test's assumptions. Fix this
as well.
tst_QObject must be updated since the
QObjectPrivate::isSignalConnected() method only supports the first 64
signals. With the addition of this new signal, sig61() in the test
becomes the 65th signal, and will always appear connected now.
Task-number: QTBUG-13999 (related)
Change-Id: Ie87893c71a231fafa7ccf2f16102238a7be8327a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QWinEventNotifier is an essential class if you're using native Windows
Overlapped IO and need to convert it to Qt signals. However the header
is marked private.
Task-number: QTBUG-68
Change-Id: I22e9a84da97f969ddb82e9ba15e604a01abd80d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
For compilations without variadic template support
Change-Id: I78af4f6022ad7a0923e5c5788a34eb7d834f50f3
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Remove references to the old bug tracker. The data from the old bug
tracker is no longer accessible, so these markers are meaningless.
Change-Id: Ib9d029d52b70fd0a512b9532d65f03763eabfe57
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For queued connections, the args[0] is set to null as it make no sens to
forward the return value to the signal.
So we need to check in the operator, that the pointer is not null.
(container.data is args[0])
Change-Id: I80bde66f1ec19de0f4962c80e5b2797d2819075c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This commit also improves the related documentation a bit.
The test is copied from the test with the old syntax, but all the
connection statement are changed to use the new syntax
Change-Id: Ia5630ca4335b9f8ca6d724ae3c8750d6f0804d8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Before, the constructor was called for complex objects, but
POD were left unitinialized. Now, they are zero-initialized.
Also add test for return values
Change-Id: Iff9bf6687589d7b7395a71fb6f650ab8aa2b6bd1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This add an overload to disconnect which is symetrical to the new
syntax of connect.
It is possible to diconnect connection like this:
QObject::connect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
QObject::disconnect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
This overload only work with pointer to member function, and not static
functions or functors.
The test is copied from tst_QObject::disconnect(), just
changed the syntax of the connection and disconnection
Change-Id: Ia8f819100cb12098e32877522b97b732b1e676a8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Partial revert of 94fc875079. All dependent
modules need to be specified in the QT variable, except core and gui, which
are there by default.
Change-Id: Ie8ffed56de03a37da191772fa321ed162e44a50d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Don't name test functions using task identifiers from obsolete bug
trackers.
Change-Id: Iba6ae8ad3b39e365c5510ed5c86749a167572829
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Bug trackers come and go, so using bug identifiers in function and test
case names will ensure that those names eventually become meaningless.
It is better to choose a meaningful name and provide explanatory
comments where appropriate.
Change-Id: I67c27782ef21b5d4eaab4854079a043c8ef6957b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Those tests are the one from Thiago's C++0X implementation
The rvalue references ones are commented out because moc do not
understand them yet
But supporting them may come later.
Change-Id: I6b0720e7f2992be9f7e34770960fa58fa456a54b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaCallEvent now can handle a pointer to QSlotObjectBase
Change-Id: I94da1e68ce9bb1fd96a9ae013a389552eb625faa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to the old connection syntax, you can now connect using function pointers.
connect(sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
You can connect also to functor or C++11 lambdas
The connections are now type safe (no more problems with namespaces
or typedefs). Implicit type conversion is also supported.
The new syntax forces us to change the meaning of signal form
protected to public, in order to be able to access the signal's
address everywhere
The way it works is by introducing new overload of QObject::connect
that take function pointer as parametter. Those new overload are template
function, that are implemented inline. The actual implementation is
in QObject::connectImpl which take a QObject::QSlotObject* as parametter
for the slot. That slot object contains a virtual function which call
the slot which has to be implemented in the header as it depends on the
template parametter. So the internals of QObjectPrivate::Connection
will store this QObjectSlot* in order to be able to make the call.
You can read a full description here:
http://developer.qt.nokia.com/wiki/New_Signal_Slot_Syntax
History of commits before it was imported on gerrit:
https://qt.gitorious.org/~ogoffart/qt/ogoffarts-qtbase/commits/qobject_connect_ptr
Thread on the mailing list:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000796.htmlhttp://lists.qt.nokia.com/pipermail/qt5-feedback/2011-September/001248.html
(The discussions on the mailing list were about trying to find a
solution that do not need making signals public, but no user friendly
solution was found)
Note: support for QueuedConnection, and the symetric QObject::disconnect is
added in another commit.
Qt::UniqueConnection is not supported yet in the new overload.
Change-Id: I67d08436b0720e7f2992be9f7e34770960fa58fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows for more focussed notification of what part of the
model has changed layout.
The slots in the proxy models can be more optimized later.
Change-Id: I1bd17465b4be6f8efdc107036db897c557fcb519
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows more granular reporting of what has changed.
This change is binary incompatible and source compatible.
Change-Id: I7c5beaee651a24780cc94e41383f7a80210bc603
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is the first change to re-enable the autotests for the individual
qtbase modules. This means adding subdir.CONFIG=no_check_target for each
module (except corelib) in tests/auto/auto.pro instead of in
tests/tests.pro
QFileSystemWatcher, QIODeice, QSettings, QTextStream, QSocketNotifier,
QVariant, QPluginLoader, QLocale: These tests currently fail, which
will block any changes that attempt to re-enable the autotests. Ignore
the failures for now by marking them as insignificant.
QAbstractItemModel: This test currently crashes, which can
destabilize the CI system when attempting to re-enable the autotests.
Skip this test for now by disabling the check target for it.
Change-Id: Ie5147d5c5cfae5e7d0a495d5c4788ce92fe2e6d8
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The removed data duplicated the first row of test data in the same
function.
Change-Id: I5d55b970d072d58c170b3ed3004c1661c6d0d13c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was for Windows versions <= 2000, which are not
supported by Qt5.
Change-Id: I779ffb8427035b7eb97d8d0af403d03065bc779c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Naming a test function "_data" is potentially confusing as that string
is a suffix reserved for functions that create data tables for
data-driven tests. Presumably this function was accidentally caught in
a search and replace at some point before the tests were imported into
the Qt repository in 2006.
Change-Id: I451c0400a1580233ee90b75dd5ad489ee3d3788e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make sure to use the Qt namespace for qGlobalPostedEventsCount.
Change-Id: I558a0b0fba1e22a2edd96f9499a2bab82046c4a4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
QAbstractEventDispatcher() does no longer install itself into the current
thread. Instead the new methods QThread::setEventDispatcher() and
QCoreApplication::setEventDispatcher() allow to install a custom event
dispatcher into any QThread as long as there is no default event dispatcher
created yet. That is, before the thread has been started with
QThread::start() or, in case of the main thread, before QCoreApplication has
been instantiated.
Change-Id: I7367e13d8d8aebed5a5651260bb69b8818eb1b90
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This change adds QMetaObject::IndexOfMethod as a parameter to
the qt_static_metacall function.
It lets the moc generated code return the index of a signal or slot
given its pointer to member function
This is required to support the new connection syntax
Change-Id: I39198c6699b5aa3599d3d282f7ac79b1e3684d33
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove various disabled and/or non-helpful debugging code.
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure. Diagnostics should also be informative -- simply
printing the value of a variable with no other information about what is
being printed (or why it is being printed) is not informative.
Change-Id: I21a6c2121be86001bb57e80f426507b6e619ee9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The qtipc autotest needs to live in qtscript due to dependencies
to that module. This commit is the first of two steps to move qtipc.
The second step is a commit in qtscript that adds qtipc there
(with a proper reference to the first commit, i.e. this one).
Change-Id: I233ee459be76fd1938868c05232ce732cfc913a8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
That was strange that QPolygon was know to QMetaType class but QPolygonF
not.
Change-Id: I67bb99644b8b1d0fe1aec730619d8048cb78219b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Each QVariant instance has internal storage which may be
used for well-know basic types. This patch changes the
behavior by delegating type dependent operation to QMetaType
class which knows more types than QVariant itself.
The patch significantly reduce amount of code in QVariant
implementation.
There are few side effects of this patch:
- better performance:
* for Core types when using Gui (QGuiVariant is able to
construct Core types)
* for small custom types (QVariant::Private::Data is used for all
types that has size small enough)
- comparing two QVariants can give different result for small custom
types (binary comparison instead of pointer comparison)
Change-Id: Ic17fa500d6a882110bfba896fd456c8e6c7a63a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaType::Type enum is the main source of type ids. Currently
there are many tasks that can be replaced by a smart macro that
can iterate over all types. The patch introduces series of FOR_EACH_
macros that may be used for code generation.
As the first step the macro was used for Q_DECLARE_BUILTIN_METATYPE
to make sure that no type was forgotten.
Second step was to use created macros in autotest to improve tests
coverage.
Change-Id: I34e9ad7bacf02b44b028bc1aad20b1241aacebd3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit moves the qmetaobjectbuilder test from test/auto/
into corelib/kernel/ since that matches the location in the Qt source.
Change-Id: I0342e8185ce775b0ef71849f365bf54c8fb56da4
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To increase the effective test coverage, this patch
re-enables the tst_qvariant test case as such, and
instead disables only the test functions that are currently
failing in CI.
Task-number: QTBUG-22453
Change-Id: Ibf0dc3caf50d34084fa50cf76d199e77a42f6e16
Reviewed-by: Olivier Goffart <ogoffart@kde.org>
Soon, QVariant will use more internal storage. It is important
that it still work with not movable types
Also, check with type that are movable but cannot be copyed
without their copy constructor to be called such as QSharedDataPointer
Change-Id: I6d67755476e4822468599bebfa8774ad96a15306
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Marc Mutz
Simon Hausmann
Kai Koehne
Frederik Gladhorn
Konstantin Ritt
Olivier Goffart
Joerg Bornemann
Oswald Buddenhagen
Andrew Knight
Tor Arne Vestbø
Mitch Curtis
Stephen Kelly
Dario Freddi
Thiago Macieira
Sergio Ahumada
Caroline Chao
Jędrzej Nowacki
Christoph Schleifenbaum
Janne Anttila
Debao Zhang
Fabian Bumberger
Axel Waggershauser
Paul Olav Tvete
Oliver Wolff
Giuseppe D'Angelo
Laszlo Papp
Sze Howe Koh
Pasi Petäjäjärvi
Friedemann Kleint
Iikka Eklund
Kai Koehne
Sergio Ahumada
Rohan McGovern
Volker Krause
Jędrzej Nowacki
Jan-Arve Saether
Kent Hansen
Debao Zhang
Lars Knoll
Bradley T. Hughes
Oswald Buddenhagen
Friedemann Kleint
Robin Burchell
David Faure
João Abecasis
Kurt Korbatits
Giuseppe D'Angelo
Jason McDonald
Glenn Watson
Miikka Heikkinen
Andrew den Exter
Robin Burchell
Denis Dzyubenko
Shane Kearns
Alan Alpert
Martin Jones
Jo Asplin
Sven Anderson
Olivier Goffart