We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This is a simple RAII class that makes semaphore releasing
reliable in the face of exceptions and early returns.
This code originates from KDTools' KDSemaphoreReleaser[1], but
has been extensively reworked to support C++11 move semantics.
[1] https://docs.kdab.com/kdtools/2.3.0/class_k_d_semaphore_releaser.html
[ChangeLog][QtCore][QSemaphore] Added a new RAII class, QSemaphoreReleaser,
to reliably perform release() calls.
Change-Id: I6aff64d37cc0882b17c4419817bde60b542f34d9
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The future tests don't need QtConcurrent as QFuture and friends are in
QtCore. The printdevice test doesn't use QtNetwork and the lancelot as
well as the testlib tests don't use QtXml.
Change-Id: I150ac99b36682aa23ad22ba943266eb0f0952838
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was so slow it was blacklisted on all platforms for timing out.
This patch lowers the timeout to a 5th and tries removing the blacklist.
Change-Id: Ib28b21de572517c548a14300f26815598efe91e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
allowed code such as
mutex.try_lock_for(10us)
to compile, which is misleading, since it's actually a zero-
timeout try_lock().
Feedback from the std-discussions mailing list is that the
wait_for functions should wait for _at least_ the duration
given, because that is the natural direction of variance
(tasks becoming ready to run might not get a CPU immediately,
causing delays), while an interface that documents to wait
_no more_ than the given duration is promising something it
cannot fulfill.
Fix by converting the given duration to the smallest number
of milliseconds not less than the original duration. If that
is not representable in an int, use INT_MAX, emulating the
effect of a spurious wakeup, which are allowed to happen if
the function returns false in that case.
In the above example, the try_lock_for call is now equivalent
to
mutex.tryLock(1);
The tryLock() docs state that the actual waiting time does
not exceed the given milliseconds, but fixing that is a
separate issue.
Change-Id: Id4cbbea0ecc6fd2f94bb5aef28a1658be3728e52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test fails on Windows occasionally with values just short of 800, the lowest
observed being 791. It is probably rounding somehow to 10ms segments, so allow
it to be up to 10 ms too fast.
Change-Id: Ie28e9f61588b68a9060a006f78eedc3a26d05155
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The adoptedThreads test never spawned any thread causing a test error
later on. Hence add a winrt version using __beginthreadex which exists
for that platform.
Change-Id: I04f980218713df20cb41d804d732e0c99b958489
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Now QBasicMutex is Lockable and QMutex is TimedLockable, which means they can
be used in std::lock_guard, std::unique_lock, std::lock, etc.
[ChangeLog][QtCore][QMutex] QMutex now fully models the TimedLockable
concept by providing the try_lock, try_lock_for and try_lock_until
functions, therefore making it usable in Standard Library lock
management classes and functions.
Change-Id: I7c691481a5781a696701e1ab78186b5cefbd6a87
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This requires fixing the test on Windows: QMutex internally uses
WaitForSingleObjectEx which can wake up early, according to the system
timer resolution:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms687069(v=vs.85).aspx#waitfunctionsandtime-outintervals
QTime must be so slow that it hides the early wakes, but QElapsedTimer is
accurate enough to make the test fail unless we add back some tolerance to
compensate for the early wakeups.
Change-Id: I20b38af9c87a0b0e38a19b9bff1c3c24975c78f5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drop addSub() test. It executes exactly the union of fetchAndAdd()
and fetchAndSub(), which have already had their UBs fixed.
No need to do fixes in duplicated code.
Change-Id: Ib72caab0310fce3ff9a40c261d8a38518f91ecaf
Reviewed-by: David Faure <david.faure@kdab.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Signed integer overflows and underflows are undefined
behavior. A test that invokes UB tests nothing, because
the standard permits any outcome.
Fix by guarding the respective operations so
they are not executed if they would overflow
or underflow.
Change-Id: I40354ee88f40e4b47b70eac7790dc3a79ac70a57
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not that we require it, but since The Qt Company did it for all files
they have copyright, even if they haven't touched the file in years
(especially not in 2016), I'm doing the same.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b4c9d53039846
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
[ChangeLog][Important Behavior Changes] Starting with Qt 5.7, Qt
requires a C++11 compiler with support for C++11 atomics. This affects
user code too: Qt headers no longer compile with a C++98 compiler. The
minimum compiler versions for this release are:
* Clang 3.4 (found in XCode 5.1)
* GCC 4.7
* Microsoft Visual Studio 2012
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f496ea9363f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's accessed by QFutureWatcherBase::isFinished(), potentially before
anything has set it. It gets to be initially true until setFuture()
has given it us unfinished future and set it false.
Add a regression test for matching state in future and watcher.
Task-number: QTBUG-12358
Change-Id: Iae7bdaa434ab80f518afe4d7d55df99c391991a4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This test when running on Windows has a race condition since in qthread_win.cpp the
finished signal is emitted before everything is cleaned up.
Change-Id: I3c03d9a245e297e8f79b2be2c34398bf7bac9bae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Tests from corelib/tools were omitted in this change.
Change-Id: I4c8786d33fcf429d11b2b624c7cd89c28cadb518
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The function declaration has to be in the same ifdefs as the
implementation.
Change-Id: I78c5795baef4adba7439f66252819963db164759
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
The overload was added for NokiaX86 and RVCT and is bound for
removal.
Task-number: QTBUG-47260
Change-Id: Ic67cee8769847956e16cd0470ebcd663a9e98a40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since of Windows (Phone) 8.1 most of the desktop's thread functionality
is also available, so we might be able to share the code and get rid of
the extra implementation for WinRT.
Task-number: QTBUG-43837
Change-Id: I0ce907cd94899834527f88c70e1e395bafdb14b3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
All variants of the tests are timing out randomly on all platforms :(
Change-Id: I9244602a8d06fd07d3cc99b2fb8fdf6e07e92cf2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Without QProcess support we do not run test which initTestCase is
trying to find.
Change-Id: Icecaad90f61a019489e372517a6d62372155bd46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
And add tests for the GCC intrinsics and for std::atomic.
Task-number: QTBUG-43794
Change-Id: Ic5d393bfd36e48a193fcffff13b9b2dbaee80469
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
[ChangeLog][QtCore][QThreadPool] Added QThreadPool::cancel() which allows
removing from the job queue a job that hasn't been started yet.
Change-Id: Ib8f1c1f32a34f5eec8338c641d820b928e470164
Reviewed-by: Nick Shaforostoff <shafff@ukr.net>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: I91ff06644e8047c2ca483f9768b46c1372eb6171
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Benign, but easy to avoid by using the same pattern as in clear().
Change-Id: Ie382313343385f0709519b232a7d58dd8181b8de
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Background:
It is often necessary/advisable to schedule tasks on thread pools !=
globalInstance(). As Herb Sutter writes in
http://www.drdobbs.com/parallel/use-thread-pools-correctly-keep-tasks-sh/216500409
and the Qt Training Material stresses, tasks you schedule on a (global)
thread pool should be non-blocking, which currently rules out using any of
the QtConcurrent functions for, say, file I/O.
Nonetheless it's often convenient to have thread pools also for file I/O, as
the thumbnail viewer exercise in the Qt Training Material shows. In this
case, you'd use a dedicated thead pool, leaving the global thread pool for
CPU-bound tasks.
Yet, none of the QtConcurrent functions allow to pick the QThreadPool
instance on which to schedule the work created with them.
This patch prepares for them to do so.
This is the first part of the forward-port of
https://qt.gitorious.org/qt/qt/merge_requests/1281.
Implement by using a new QThreadPool* member that defaults to nullptr,
and adding setThreadPool to set this member, then using it in lieu of
QThreadPool::globalInstance() everywhere.
I chose to leave m_pool == nullptr to mean globalInstance() to avoid
creating the global instance whenever a QFuture is created, even if the
future represents the result of a calculation not run on the global thread
pool.
[ChangeLog][QtCore][QFuture] Can now be used with any QThreadPool, not
just globalInstance().
Task-number: QTBUG-17220
Change-Id: I4e1dc18d55cf60141b2fa3d14e2d44a3e9e74858
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Instead of using std::thread, use the WinRT ThreadPool to manage
threads. This allows for setting the scheduling priority, and provides
a path to enable XAML integration (which requires Qt run on a background
thread).
QThread::terminate() is still unsupported, and only the winmain thread
can be adopted due to the behavior of the thread pool when creating
tasks from the GUI thread. The associated tests are now skipped, and
all other QThread tests pass.
Task-number: QTBUG-31397
Change-Id: Ib512a328412e1dffecdc836bc39de3ccd37afa13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The tasks might not have run yet at the time of the QCOMPARE, so we need
to acquire on the semaphore in order to ensure that this is the case,
just like in the previous testcase.
Change-Id: I1da72bb07c2f53760b3bf912fc26aaf10ed18d48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
MSVC 2008 is confused by TypeInStruct being a template, resulting in
\tst_qatomicinteger.cpp(189) : error C2027: use of undefined type 'QStaticAssertFailure<Test>'
with
[
Test=false
]
for int (and thus for all unsupported types). This appears to be a real
Heisenbug-nature compiler bug as it can also be fixed by adding
qDebug() << Q_ALIGNOF(TypeInStruct<T>)
before the static assert.
Task-number: QTBUG-37195
Change-Id: Ib2b60f3c1ffeb0b8bdeb1fb0c659655ce4ab10d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This simplifies the code a lot and avoids silly mistakes where a
specific integer type is missing (such as char16_t).
Change-Id: Id91dfd1919e783e0a9af7bfa093ca560a01b22d1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The current synchronization mechanism was racy: decrementing waitingThreads
and then hoping that the wakeOne will wake a thread before its expiry
timeout happens. In other words, on timeout, a just-assigned task would
never run. And then no other task would run, if maxThreadCount is reached.
Fixed by using a queue of waiting threads (rather than just a count), and by
moving the wait condition into the thread itself, so we know precisely
which one we're waking up, and we can remove it from the set of waiting threads
before waking it up, and therefore it can determine on wakeup whether it
has work to do (caller removed it from the queue) or it expired (it's still
in the queue). This is reliable, whereas the return value from QWaitCondition::wait
isn't reliable, when the main thread has already decided that this thread
has work to do.
Task-number: QTBUG-3786
Change-Id: I1eac5d6c309daed7f483ac7a8074297bfda6ee32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ib1047731667ba8a7b9db2f62924eb42a6b85b4fd
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Change-Id: I88d98421978e0f5c55af8647f3f74c265b45bd37
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fixes the obvious race between the test of 'release' in the thread
and the setting of 'release' in the test function.
Change-Id: I92df52d7b18e8154f17229a3dbd4a0e58f4a3b5b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The code uses a QSignalSpy to check whether the thread started,
but the signal emission (and subsequent appending to the spy) and
the check for spy.count() before the final thr.wait() are not
synchronized:
The signal emission happens-after the thr.start() and -before the
final thr.wait(). Likewise, the spy.count() happens-after thr.start()
and -before thr.wait(), but neither one happens-before the other.
Thus, there is a data race.
The wait(200) between thr.start() and mutex.unlock() doesn't help,
either, because we check only that it doesn't return true, iow, we
check that it timed out. But it will happily do that if the thread
has not yet started executing, so there's no happens-before relation
to be had via that avenue, either.
I first fixed by moving the spy.count() check to after thr.wait().
In that case:
signal emission happens-before thread finishing
happens-before thr.wait() returning
happens-before spy.count()
so no race.
Arguably, that makes the check rather useless, so I decided to remove
it completely.
Change-Id: I6bb47c4114961ee6e9251cfebeb4b7794ba674a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To ease interruption of long running tasks, a new method
QThread::setInterruptionRequested() can be called.
The task can check QThread::isInterruptionRequested()
and act upon it by stopping itself.
These methods are designed to replace the use of a global variable
and other hacky ways to stop a task running in another thread.
Change-Id: I17622dd60d2262078210e7e4294ad6c53a6dc179
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(dacf9961da)
In order to see 2 active threads, we must check activeThreadCount() before
the runnable finishes.
Change-Id: I1a48b41e0c1fd81a65d915b9bd1e741ff267ed2b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QTBUG-21051 has a testcase where activeThreadCount() could actually
end up at -1 (converted to an autotest in this commit).
The reason was: start() calls tryStart() which returns false due to
too many active threads (reserveThread() causes this), so it calls
enqueueTask() - which actually wakes up the waiting thread, but
it didn't decrement the number of waiting threads.
Note that tryStart() is "if I can grab a waiting thread, enqueue task and wake it"
while start(), in case tryStart() fails, wants to "enqueue, and then if I can grab
a waiting thread, wake it". This is why enqueue shouldn't wake; waking must happen
only if we can grab a thread (d->waitingThreads > 0).
Task-number: QTBUG-21051
Change-Id: I3d98337103031c9bdf0bf365295f245be0c66aa7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QThreadPool::clear() method removes all queued QRunnable.
When a large number of long-running tasks are queud in a
QThreadPool its destruction, which calls waitForDone(), can
be quite long.
QThreadPool:clear() removes (and deletes when appropriate)
all QRunnable that have yet to be started from the queue
enabling a faster interruption.
Change-Id: Ie5d6028ad3cfe7e439d1db068c8d0936ff818db9
Reviewed-by: David Faure <david.faure@kdab.com>
The optimisation done in cbaf52b099 for Qt
5.0 got the order wrong of the comparison. The queue must be sorted in
decreasing priority order. But since higher numbers mean higher
priority, that means the queue must be sorted in decreasing priority
number order.
Task-number: QTBUG-29163
Change-Id: Iaf3424b9bb445bf5c71518927f37253cead454f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
Marc Mutz
Liang Qi
Friedemann Kleint
Ulf Hermann
Allan Sandfeld Jensen
Allan Sandfeld Jensen
Tor Arne Vestbø
Maurice Kalinowski
Giuseppe D'Angelo
Liang Qi
Friedemann Kleint
Simon Hausmann
Thiago Macieira
Jani Heikkinen
Maurice Kalinowski
Edward Welbourne
Frederik Gladhorn
Rainer Keller
Oliver Wolff
Pasi Petäjäjärvi
Marko Kangas
Nick Shaforostoff
Matti Paaso
Frederik Gladhorn
Morten Johan Sørvig
Andrew Knight
Keith Gardner
David Faure
Friedemann Kleint
Oliver Wolff
Kamil Trzcinski
Corentin Jabot
Axel Waggershauser
Sergio Ahumada
Pasi Petäjäjärvi