There are two examples for Camera in Multimedia module. One of them is
using widgets, while the second one is QML based.
In such case the QML example is preferred for Android platform. That is
why only QML example should have android tag.
This commit remove android tag from qtMultimedia Widget Camera example.
Fixes: QTBUG-113238
Change-Id: I9d2c072fcc18e8e5a5a44a9a2da887a7b6660b46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
It's unlikely we will ever use pro2cmake at this project stage,
so it doesn't make any sense to keep the 'special case' markers
in the CMake scripts. Remove them and replace with TODO where
needed.
Change-Id: I84290c20679dabbfdec3c5937ce0428fecb3e5a7
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Argument passed to the \ingroup command should not be wrapped in
braces as it's read as-is.
Pick-to: 6.5
Task-number: QTBUG-111891
Change-Id: Ic759af37e8b7e9f60651103b395fdd7e630779c6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Examples in Qt's codebase must be tagged with specific categories
such that Qt Creator can group them thematically. This can be done
by way of using the `\meta category` construct in QDoc.
At the same time, we want the generated documentation to group the
examples by the same logic as in Qt Creator. Hence, QDoc was modified
to implicitly add a group for each category that is used in a
`meta category` invocation.
By design, QDoc exposes ways to list groups to users, but no way to list
the \meta command invocations. Letting QDoc implicitly add a group for
categories passed to the \meta command as a side-effect, therefore breaks
with the principle of least surprise and the single responsibility
principle.
An alternative solution makes use of QDoc's existing support for code
generation through macros. This patch introduces the macro
`\examplecategory` as a global macro throughout Qt to achieve the same
effect as the aforementioned change to QDoc. The macro takes an argument
enclosed in curly braces. This argument is the example category name. It's
used as meta information in the manifest files consumed by Qt Creator, and
added as the category group name for the QDoc side at the same time.
The introduction of this macro allows reverting the change to QDoc
itself, while maintaining feature parity for both Qt Creator and the
generated content.
Task-number: QTBUG-111891
Pick-to: 6.5
Change-Id: I311b98168253b45ac456ff3c1824db3d835191a9
Reviewed-by: Luca Di Sera <luca.disera@qt.io>
It doesn't showcase anything interesting that other examples
don't already show off.
Pick-to: 6.5
Change-Id: Ie95c3ddb3ff52b3beab54bd6fa75fb75ae5c7ba5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
The previous example finished way too quickly and provided no real
value in regards to API understanding. Previously, QtConcurrent::map
was used, which was also used in other examples. We are now using
QtConcurrent::filterReduce to demonstrate other functionality.
Task-number: QTBUG-111165
Pick-to: 6.5 6.5.0
Change-Id: Ibd6eb119d0711cddfe8b211d460e9d67d6ce95c3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Added a QFileDialog to let the user select a path. Before, the path
was statically assigned with "../../" , which is not optimal.
I also modified the findFiles function to check for text files in
general and not only *.cpp and *.h files. Lastly the result of the
word counting is now displayed on the console, as I think this is an
informative output from this example.
Task-number: QTBUG-111165
Pick-to: 6.5 6.5.0
Change-Id: Ie27c6acb4f79a78e3bef141edb92de08901fde71
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Removed side panel and swipe to remove examples as part of patchset
3bc6f344a8f10699313c3e0c9236dd6945edd895 and updated docs to reflect
that change.
Fixes: QTBUG-110989
Pick-to: 6.5.0
Change-Id: I6241dd9842b1584e3dd25057591fe29eaa34d579
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
It is essentially the same as the other mainwindow examples, showing
how to create a text editor. The only special code here is the tiling of
the different main windows, which - without any documentation or
explanation - is neither very helpful, nor relevant in 2023.
Pick-to: 6.5
Change-Id: I48b92b1cf057f586e0d2842d1c0a3312154e9a13
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
All QtQuickControls examples are marked for android by default.
However, the To Do List example is iOS specific so don't include it.
Add it to the list of iOS tags instead.
Fixes: QTBUG-111426
Pick-to: 6.5 6.4
Change-Id: Ic89d6b40d263f81ed402a2064f2e44b2fa826940
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
qdoc does ignore image directories if no file with 'known' suffix
is found.
[ChangeLog][qdoc] *.webp has been added to the list of default image
suffixes.
Pick-to: 6.5
Change-Id: I49524ea13d14dd7e246401dec7deb2ba4e66cb07
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The bearer code hasn't been in Qt for some years.
Pick-to: 6.5 6.4 6.2
Change-Id: Id69ad1ce5035a0970f3507d4b6ba4a5549bf1d6c
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's not a very well written example, using (largely unneed) hacks to
implement what it does. It's also misleading - the syntaxhighlighter
example is a better showcase for building a useful code editor.
Move it to manual tests.
Fixes: QTBUG-111025
Pick-to: 6.5
Change-Id: I405d41688235bf3e9a08373e716769f26d02fec6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The example follows bad and outdated practices:
- running time consuming and I/O heavy workload in the GUI thread
- calling processEvents to keep the UI responsive
- showing results only at the end of a search rather than continuously
Perhaps this example can be rewritten at some point to apply modern
practices (at least use a thread and emit signals), but it seems
to have low overall educational value.
Moving it to be a manual test for now.
Fixes: QTBUG-111002
Pick-to: 6.5
Change-Id: Id630fd4599096448ea4f96bcbf977b11a039796f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The example is 90% boiler plate for subclassing QFrame and providing
a bit of GUI to change the size of the label using sliders. The
interesting bit is a block of 25 lines of code, so turn those into a
snippet and add that to the QTextLayout overview documentation.
Fixes: QTBUG-111011
Pick-to: 6.5
Change-Id: I6e97b2ea47b553c8d998ad185cfac006721ef7ee
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This is almost exactly the same as the "Analog Clock" (widget) example.
"Analog Clock Window Example" demonstrates:
* How to render to a QWindow (covered by RasterWindow example)
* QPainter and transformations (covered by Analog Clock example)
* How to use QTimer (covered by Analog Clock example)
Pick-to: 6.5
Change-Id: I7f20a29798830ed6345eca250e4139cb314cab84
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It demonstrates timerEvent() and some QFontMetrics
There are other examples that demonstrates this
Pick-to: 6.5
Change-Id: I4ad6f30c8ef93c995f980545ed88ab13b9aa9c7d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We only support Qt 5.15 since a while, so the detailed information in
which Qt 5 version a particular class, function, or enum was introduced
is becoming less and less relevant.
Pick-to: 6.5
Change-Id: I39bd579f23abc0ac84879e9bd22e6a97651ef7c3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Google translate drops the space around the non-translatable
inline text. This should ensure that inline anchors have extra
margins.
Change-Id: I1c204a9a27d0a39256ef04aa3f03ba1b8433aa54
Done-with: Topi Reinio <topi.reinio@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Which can be used by Qt Creator and Assistant.
Task-number: QTBUG-97125
Task-number: QTCREATORBUG-26557
Change-Id: I03e5ac0a15f84101c73887724693e9eb27670754
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Move i18n example out of qtbase. In qttools, it can use lrelease,
avoiding the need to store .qm files in the repository.
Change-Id: I8ba36a1372c2a743b809e3f7ea95a67825558f41
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Many applications offer shortcuts for quick interaction with the
application. It is also common in such applications to offer a shortcut
editor in the preferences or separately in a dialog.
However, even though this is a fairly common use case for applications
with more than a couple of shortcuts, there is no good and comprehensive
official Qt example how this could be achieved.
This change is an attempt to bridge the gap.
Change-Id: Ic01a404e6157bda1b0a75a0b792cbfe5d910d48f
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The same kind of line is required for DocBook as HTML or QHP. This
change makes that requirement clear.
It was suggested by Nicholas Bennett in a change in existing
configuration for this exact line.
Change-Id: I664300f229bac9931c6f1ac4a08bd7c8c42bf37c
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Four examples in QtQuick module had wrong tag in qdocconf file:
-QQuickRenderControl D3D11 Example
-Scene Graph - Direct3D 11 Under QML
-Scene Graph - Metal Texture Import
-Scene Graph - Metal Under QML
The first two are specific to Windows. The other two are IOS specific.
They were all marked as "android".
This commit changed those tags to correct one.
Pick-to: 6.4 6.4.0 6.3
Fixes: QTBUG-106436
Fixes: QTBUG-106438
Fixes: QTBUG-106439
Fixes: QTBUG-106469
Change-Id: I3d8d3cb54e4e552d7574c7c2f1d59437374c6446
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Copy them from QRegExp docs in qt5compat to
doc/global/includes/corelib/port-from-qregexp.qdocinc, so that the
porting docs can be included from both Qt 6 porting guide and qt5compat.
Task-number: QTBUG-89702
Pick-to: 6.4 6.3 6.2
Change-Id: I616e2333f60f36e4851398479939fd062016748d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Cpp.ignoretokens, Cpp.ignoredirectives, falsehoods are not
used anymore by clang based qdoc.
Most defines are not needed, either, because clang based qdoc
will get these defined by scanning the normal headers. And QDOC,
Q_CLANG_QDOC is actually set by qdoc itself.
What's left is Q_GUI_LIB, Q_WIDGETS_LIB, which is used in headers
modules to make some API conditionally available. Finally, there's
QT_KEYPAD_NAVIGATION, which seems to be a Qt 3 thing, but still
some documentation depending on it ;)
Pick-to: 6.4
Change-Id: Ib9cf0debac8d569cc21271087168a46c0f8635ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Hide the 'template magic' to implement Q_WEAK_OVERLOAD from the
documentation. So far Q_WEAK_OVERLOAD void foo() lead to
template <typename> void foo()
in the generated documentation, which is arguably confusing to the
uninitiated. And people interested in implementation details & exact
overload resolution will arguably just read the .h files themselves.
Fixes: QTBUG-104851
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I5e0b1b337b28e621e6a627241aa8037da0a879a7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
qt-module-defaults-online.qdocconf includes online-specific overrides
for some of the documentation macros. This needs to happen also in
the commercial template to have equivalent behavior.
Pick-to: 6.4 6.3
Change-Id: I2ca3246fbf16cef502e8eada056df6e8db573d5d
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use an unversioned link to the online documentation, ensuring we
link to the latest version of this page.
Pick-to: 6.3 6.2 5.15
Task-number: QTBUG-102787
Change-Id: I285356687a3873fb861a54d003185f2b751c1b72
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The previously defined padding for the tab content was
overwritten to 0 by a more specific css selector. In addition,
code snippets should not have any extra padding, hence the :not(.pre)
css selector.
Pick-to: 6.3
Change-Id: I8f331924c5d01c8971660bb7a5b3aad25e3dee8a
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
With the old value, they were placed above the
header bar. Moving them a few pixels below looks
less broken.
Pick-to: 6.2 6.3 5.15
Change-Id: Iddd9d5e0b5c199fe35a9c8b8a7cac9a472901a21
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
MSVC will export any function in an exported class, including inline
ones. Conversely: client code calling inline functions in imported
classes will end up simply calling the symbol of the function, even if
the function is fully inline.
This is a problem for adding post-C++17 APIs in Qt. Such APIs are added
as inline functions protected by feature-macro tests, so that both Qt
and client apps can use any C++ version they want (any combination
works).
However, if we add a function using post-C++17 API to an exported class,
then the combination "Qt built in C++17" + "client built in post-C++17"
won't work any more. The client will expect the symbol for that function
to be exported by Qt, but Qt won't have it (built in C++17).
As a workaround, add a marker that turns these functions into "faux
templates", like Q_WEAK_OVERLOAD does.
Change-Id: I2adab81e3129c881c5a8e0772948b176fa4db1b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The macro enables tabbed content in the online style
only. It's usage must be gaurded with a conditional
block as shown in the following example to handle
the offline style usecase:
\if(onlinedocs)
\tab {build-qt-app}{tab-cmake}{CMake}{selected}
\tab {build-qt-app}{tab-qmake}{qmake}{}
\tabcontent {tab-cmake}
\else
\section1 Using CMake
\endif
CMake-specific instructions go here
\if(onlinedocs)
\endtabcontent
\tabcontent {tab-qmake}
\else
\section1 Using qmake
\endif
qmake-specific instructions go here
\if(onlinedocs)
\endtabcontent
\endif
Pick-to: 6.2 6.3
Change-Id: I02d50c057280a9ffea913642284e67ddcda7aa94
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Provide basic (internal) documentation of each logging class and link
the command-line documentation to pages relevant to the formats not
defined by Qt.
Change-Id: I3251dd1304203c6ab87dfe1f2dec0e9787ab69f8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Document the tag for more clarity on why it's needed, and for what
platforms.
Pick-to: 6.2 6.3
Task-number: QTBUG-97009
Task-number: QTBUG-91150
Change-Id: Ie4522fb582583be07270d3cdbf83992897b51669
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
There are many different wordings for how to use the module across the
module landing pages. The goal here is to provide consistent wording
and code formatting, which can be used across all landing pages.
The style and wording is based on what has been implemented in the
Qt CoAP module landing page.
This is the syntax in a qdoc file:
\include {module-use.qdoc} {<snippet-id>} {<argument1>}
Inside qdocinc, you can then get the value of the argument1 using the
parameter \1.
Task-number: QTBUG-100369
Change-Id: Ib25e509e119008157e69db629eb011e5a9074022
Pick-to: 6.3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Both INITIAL_MEMORY and PTHREAD_POOL_SIZE are settings users can
change, they are not interface settings.
Fixes: QTBUG-100693
Pick-to: 6.3 6.2
Change-Id: Ie1547c7f52c9fe109a313260616705728024b6b8
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: David Skoland <david.skoland@qt.io>
Because at least one compiler *cough*MSVC*cough* is unable to dllexport
a method that is in a dllexport'ed class.
Change-Id: I54f205f6b7314351b078fffd16d06b4e6ef0c086
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Introduce the qdoc macros \cmakecommandsince, \cmakepropertysince, and
\cmakevariablesince that insert a paragraph akin to the \since context
command.
Example:
\cmakecommandsince 6.3
produces the paragraph
This command was introduced in Qt 6.3
The macro text is wrapped in \n\n to ensure that we always generate a
new paragraph.
Pick-to: 6.2 6.3
Task-number: QTBUG-100212
Change-Id: Id5c8e8812e6b0b915674d108a0e775091e9eacd8
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Update to use Qt Creator 7.0 and CMake as the build system.
Fixes: QTBUG-100075
Pick-to: 6.3
Change-Id: I71e1d1446a2c79c98423ca5d4427b4b4eb00021b
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Create macros that wrap the magic developed in
7d63efc16f and apply it to all
Q_DECLARE_METATYPE invocations that show up in Clang -ftime-trace for
a PCH'ed QtGui build.
Effects on compile times:
Clang 10 -ftme-trace:
$ ClangBuildAnalyzer --analyze qtgui-before.trace | head -n6
Analyzing build trace from 'qtgui-before.trace'...
**** Time summary:
Compilation (523 times):
Parsing (frontend): 628.3 s
Codegen & opts (backend): 304.5 s
$ ClangBuildAnalyzer --analyze qtgui-after.trace | head -n6
Analyzing build trace from 'qtgui-after.trace'...
**** Time summary:
Compilation (523 times):
Parsing (frontend): 546.0 s
Codegen & opts (backend): 304.4 s
GCC 11 time (bash builtin):
before:
$ time for ((i=0; i < 3; ++i)) do touch src/gui/painting/qpolygon.h ; ninja libQt6Gui.so; done
real 4m13,539s
user 49m24,416s
sys 3m18,177s
after:
$ time for ((i=0; i < 3; ++i)) do touch src/gui/painting/qpolygon.h ; ninja libQt6Gui.so; done
real 3m55,697s
user 45m19,941s
sys 3m7,370s
Task-number: QTBUG-97601
Pick-to: 6.3
Change-Id: Ia8e37a58937568a7ed21cfeb4b27274deca4d53b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Sync with Qt Creator Manual 6.0.0.
Remove topics related to using Qt Quick Designer plugin
because they are now in the Qt Design Studio Manual, only.
Add new topics and fix some topic titles.
Some topics also exist in Qt Design Studio Manual and can
be accessed with the "Qt Design Studio:" prefix.
Pick-to: 5.15 6.2
Change-Id: Ie4f07b0a1602f3318ca5335ee72130ddce12801e
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
You can use these link targets in Qt docs to refer to
QDS topics.
Pick-to: 6.2
Change-Id: I4d4e288e1456ef92c5e8d9949390a431220eab75
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Last pieces of code guarded by these defined were cleaned up back in 2016.
Task-number: QTBUG-98650
Change-Id: I52d971c2b476b7d8d362be7807b71b71e657c70b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QDoc does not need those defines anymore because there is no Qt3Support
library anymore; they are simply not #ifdef guarding any code anymore.
Task-number: QTBUG-98650
Change-Id: I42b9c3ce025f639ce6282102b5eadb52fea7fa8e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Like Q_NAMESPACE_EXPORT for Q_NAMESPACE, this variant of Q_GADGET
allows passing an export macro. This is useful to avoid exporting the
whole class just to get the staticMetaObject hidden therein exported.
Before anyone asks: No, we don't need Q_OBJECT_EXPORT, because QObject
subclasses, being polymorphic, always need to have a class-level
export macro (to export their vtable), but while that technique also
works for value classes (the Q_GADGET audience), it is not desirable
for them, because it makes inline functions exported in Windows debug
builds, which is not what we want, because it needlessly restricts
what you can to with the inline functions (e.g. remove).
[ChangeLog][QtCore] Added the Q_GADGET_EXPORT macro, which is like
Q_GADGET, but allows passing an export macro (like Q_NAMESPACE_EXPORT
for Q_NAMESPACE).
Fixes: QTBUG-55458
Change-Id: I546297de1e8aa45d83381991bcd3fbca61e1eef0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This macro expands to the major version of Qt, complementing the
already existing \QtMinorVersion macro.
Pick-to: 6.2 5.15
Change-Id: I64861f8cc50d73f34369311a19b5e554645a4127
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The offline CSS already had some related rules, but at some point
QDoc lost the ability to produce the required markup. It has now
been reintroduced.
Pick-to: 6.2 5.15
Task-number: QTBUG-97448
Change-Id: I5165cd01f3653dfb35854ca6b8040e8daa434347
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The macro takes only one parameter, sentences must be wrapped in {}.
Pick-to: 6.2
Fixes: QTBUG-97441
Change-Id: I7177548a32a67d720c2b551d16c09d898b0fda51
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
For normal \page elements, \brief is just showing in the
\generatelist or \annotatedlist commands. Make sure the description
is also visible in the actual CMake command/variable/property
page by defining a \summary macro.
Pick-to: 6.2
Change-Id: I12bc854d547059a2f6309a5922bb0b2a36d4e41c
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
The documentation links on `msdn.microsoft.com` now redirect to
`docs.microsoft.com`.
While the redirection works, our script to catch broken links on
dev-snapshots builds of the documentation doesn't handle redirection
correctly, reporting it as broken.
Both to appease the broken-links script and to avoid an unneccesary
redirection, the links were modified to point to the equivalent address
in the new domain.
Furthermore, the link to the `Winsock 2 Socket Handle` was moved to be
an `\externalpage` link, as it was used in two different places.
Additionally, the `\externalpage` link titled `Dirext X SDK` was removed
as it was not used in any part of the documentation.
Task-number: QTBUG-96127
Pick-to: 6.2 6.2.0
Change-Id: I07f0ae8d610a7f8322b892a2fa37a5cc1769289e
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
In the effort of repairing broken links as per QTBUG-96127,
a series of RFC links referring to `tools.ietf.org/html/*` were modified
to point to the new address that the site redirected to.
To simplify executing a similar task and to diminish the duplication of
manually inserted urls, the already existing `rfc.qdoc` file, containing
`\externalpage` commands directing to RFC locations, was enhanced with
links to all RFCs that were mentioned in the current documentation, so
as to aggregate this common category of links.
All links pointing to a `ietf` domain inside QDoc documentation blocks
were then changed to use the newly provided external-references.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: I2a52eb6aa8c9e346f64ef1a627b039220d9f6c2a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The link was replaced with an equivalent one from the Internet Archive's
Wayback Machine, as it is the one used in
RFC-6265 (https://datatracker.ietf.org/doc/html/rfc6265#ref-Netscape) to
deliver the same information.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: I3d8b7ac511e040c1b4651b59ddedfa580c45ce90
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The `rfc.qdoc` file was modified to order the external RFC link by RFC
number.
Furthermore, the links were modified to use the `datatracker.ietf.org`
domain to be consistent with the recent changes to the old
`tools.ietf.org` links.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: I865e7ea131264d0b123f34d796b7ec8007931adc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The documentation links on `msdn.microsoft.com` and
`msdn2.microsoft.com` now redirect to `docs.microsoft.com`.
Some of the links in the documentation were to those domains.
In particular:
- An `\externalpage` link to the `Mitigating Cross-site Scripting With
HTTP-only Cookies` article.
- An `\externalpage` link to `Microsoft Actibe Accessibility Event
Constants`
- A link to the `RtlGetVersion` function in
`qoperatingsystemversion.cpp`
- A link to the `GetCommandLine` function in `qcoreapplication.cpp`
- A link to the `KNOWNFOLDERID` constant in `qfiledialog.cpp`
While the redirection works, our script to catch broken links on
dev-snapshots builds of the documentation doesn't handle redirection
correctly, reporting it as broken.
Both to appease the broken-links script and to avoid an unneccesary
redirection, the above links were modified to
point to the equivalent address in the new domain.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: I0e9a132f06af7fc43bca6c8ad2054feb6e3e27cd
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QDesktopServices::openUrl(const QUrl &url) is already implemented
on Android. But even if it is possible to set an URL handler, the
mechanism to invoke it is missing. With this commit the URL handler
will work on Android like it is already working on iOS.
Task-number: QTBUG-84382
Pick-to: 6.2
Change-Id: Ic560bd380f1cc59586861aa1a6a3ea064276a39e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When documenting a CMake command, document the unversioned command
'qt_foo' and use '\versionlessCMakeCommandNote qt6_foo' to refer to the
versioned command. This avoids duplicating the command signature.
Use the new macro where applicable.
Pick-to: 6.2
Task-number: QTBUG-95796
Change-Id: I2e4180fbda0b89acf3d8c036459f591eb2f46475
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Change all outbound links in user-facing documentation.
* Reflow lines that exceed 100 cols as mandated by clang-format.
* Add unicode.org as a global \externalsite.
Pick-to: 6.2 6.1 5.15
Change-Id: I2ba1e434aa913e678406d62c2801f1a8b2d9e4f4
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Certain targets on the generated HTML still use the obsolete
<a name=""> method of creating an anchor. Add a rule for a
replacement <span> element, using the id attribute.
This ensures that the highlighting animations continue to work
after the use of obsolete HTML is dropped from QDoc.
Change-Id: I2b70470b08d0e0f70702ad2820f4e065f2c08ff5
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The vspan was originally added for iframes. They are not needed
(and look weird) for normal images/links.
Pick-to: 6.1
Fixes: QTBUG-92266
Change-Id: I9da2b52234b2e49bc0cdef4bf8f0865fb092bb31
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
- Start in root folder so that large directories (/bin/, Windows)
are easily reachable
- Remove the line edit and navigate by double clicking instead
since this is more in line with expectations
- Use a QPlainTextEdit for logging
- Make the log message more informative
- Add icons
Change-Id: Ia3cd7fc143efef80772923291f0b711913aa47be
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Using a dark theme with the simplified offline style in Qt Assistant
results in hard to see links against a dark background. Let the
backend style the hyperlinks instead.
Pick-to: 6.1 6.0 5.15
Fixes: QTBUG-32778
Change-Id: I51ca87f8a526a07a385e42a3c978712ac4d1e91b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
- Add links to new topics
- Remove links to obsolete topics
- Update changed topic titles (might break links in module docs)
- Fix HTML file name of the Creating a Mobile Application topic
Change-Id: I8f06171946d85ed0fbfd457ed115f41cb5a9e2d0
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
There are still other parts of the CMake API that are not yet
documented. This change only addresses qt_add_executable() and the
Android-related commands it uses.
Fixes: QTBUG-88839
Task-number: QTBUG-84482
Pick-to: 6.0
Change-Id: I761b5ce908d1f62284baabe2d414cd37a0efe83d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Bartlomiej Moskal
Alexey Edelev
Topi Reinio
Paul Wicking
Mårten Nordheim
Dennis Oberst
Santhosh Kumar
Jan Arve Sæther
Volker Hilsheimer
Doris Verria
Friedemann Kleint
Kai Köhne
Mitch Curtis
Assam Boudjelthia
Ville Voutilainen
Venugopal Shivashankar
Eike Ziller
Thibaut Cuvelier
Laszlo Papp
Alexandru Croitor
Lucie Gérard
Sona Kurazyan
Andreas Eliasson
Giuseppe D'Angelo
Edward Welbourne
Thiago Macieira
Lorn Potter
Joerg Bornemann
Leena Miettinen
Marc Mutz
Albert Astals Cid
Ivan Tkachenko
Luca Di Sera
Lars Schmertmann
Craig Scott