Q_MOVABLE_TYPE was conceived before C++ had move semantics. Now, with
move semantics, its name is misleading. Q_RELOCATABLE_TYPE was
introduced as a synonym to Q_MOVABLE_TYPE. Usage of Q_MOVABLE_TYPE
is discouraged now. This patch replaces all usages of Q_MOVABLE_TYPE
by Q_RELOCATABLE_TYPE in QtBase. As the two are synonymous, this
patch should have no impact on users.
Pick-to: 6.0
Change-Id: Ie653984363198c1aeb1f70f8e0fa189aae38eb5c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Except for types marked as unresolved, we're doing it anyway - the only
difference is that now we skip looking up the metatype by typeid.
[ChangeLog][QMetaProperty][Important Behavior Change]
QMetaProperty::typeName returns now always the same name as name() of the
corresponding metatype. This can cause a change for enum properties
which were not fully-qualified.
Change-Id: I1f57743948b7262ac06095d3bbc838d620f6e481
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If a testcase failed before we reached free, the QMetaObject would have
leaked.
Moreover, defer freeing until all tests have run: dynamic QMetaObjects
might create dynamic metatypes. If those were shared, we would run into
issues.
Change-Id: I2edfcb2605e58eaba454bfe0446a6b187a5210df
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Properties of non-dynamic classes always have the metatype stored, so we
can make use of it. Moreover, when the builder is converted into a
metaobject, we need to resolve the metatype anyway.
As a driveby, add a dedicated metatype test to tst_qmetaobjectbuilder.
Change-Id: I7eea0cd8fc2da5d92c7fc803f05cd81e3a9d4cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since QHash is missing the overload, too, just ignore the hint for
now, but provide the STL-compatible signature so generic code can use
QSet as a normal sequential container.
[ChangeLog][QtCore][QSet] Added insert() overload taking an insertion
hint, for STL compatibility.
Change-Id: I9fe41877343ebff721b650fb7b9cd4e06b6608d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
This information is required in the QML engine to handle list properties
(instances of QQmlListproperty<T> and list<T> types from QML).
Pick-to: 6.0.0 6.0
Change-Id: I1e30572f1c91f58b290cb9b4b07433af99a1db6f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This was so far problematic as it gave various link errors. The solution
to that seems to be to make the default constructor of QPairVariantInterfaceImpl
constexpr to get around one set of problems.
The other problem to solve where undefined references to metaobjects. The
reason for that is apparently that QMetaTypeInterface contains a direct
pointer to the meta object, something the linker doesn't like. Adding a
level of indirection by using a function that returns the pointer seems
to solve that problem.
Fixes: QTBUG-88468
Change-Id: I5612ae807ea3b7e49bc40349d8d1fca1be9bd7ee
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The set() function sets a given byte in shared memory. Thus,
just take a char, not a QChar.
Change-Id: I6f3d148eb730573070832ddce6f63363408790cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This ensurse that we do not do dobule notifications in setValue.
Moerover we avoid needless notifications in markDirtyAndNotifyObservers
when the value did not change. Lastly, if the value did actually change,
we pass that information along to notify, so that we do not evaluate the
eager property twice.
Fixes a test-case which errorneously relied on the old behavior, and
adds a new test which verifies that the fix works.
Change-Id: I8ec6fa2fe8611565dfc603ceab3ba5f92999b26c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
std::function as a type is rather unfortunate for us, as its SSO buffer
makes it rather large, and we can ensure that the function is never
empty.
Considering that we do need to allocate memory for
QPropertyBindingPrivate anyway, we can get rid of the SSO buffer and
instead coalesce the allocations (similar to how std::make_shared works).
The memory looks then like
[--QPropertyBindingPrivate--][Functor]
and QPropertyBindingPrivate can get a pointer to the functor via
reinterpret_cast<std::byte>(this)+sizeof(QPropertyBindingPrivate).
To actually do anything with the functor, we do however need a "vtable"
which describes how we can call, destroy and move the functor. This is
done by creating a constexpr struct of function pointers, and storing a
pointer to it in QPropertyBindingPrivate.
As a consequence of those changes, we cannot use QESDP anymore, as we
now have to carefully deallocate the buffer we used for both the
QPropertyBindingPrivate and the functor. We introduce a custom
refcounting pointer for that. While we're at it, we make the refcount
non-atomic, as bindings do not work across threads to begin with.
Moreover, we can now make the class non-virtual, as that was only needed
to hack around limitations of QESDP in the context of exported symbols.
Change-Id: Idc5507e4c120e28df5bd5aea717fe69f15e540dc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We'll need QContainerTraits as a class for changing properties
of our containers, so free up that name. This is not a problem,
as the namespace is new in Qt 6 and has only been used internally
so far.
Change-Id: I6d6b9d9c32b92b77e66323f1fc29b3ddd8baa98f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The tst_qtimer::zeroTimer unit test was relying on
QCoreApplication::processEvents processing all pending
events. However, for the glib backend, this is not the case.
For the glib backend, if there is an event of high
priority pending, low priority events are not processed.
This patch changes the test to use the overload with
timeout of processEvents, which does process events
until there are no more events or the timeout is reached.
Fixes: QTBUG-84291
Change-Id: I429141507b8603b57a191efa21f154493d75cc9e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This reverts commit 1918c689d7.
The template gets always instantiated in QObjectPrivate::connect, even
if the connection types is not Qt::(Blocking)QueuedConnection. For
non-queued connections we however support using incomplete types in
connect. The only way to fix this would be to make the connection type a
template parameter of QObjectPrivate::connect (or at lesat pass some
compile time constant indicating "blocking"-ness) along, so that we can
use if constexpr instead of if. As all involved classes are private, we
can postpone investigating this solution to 6.1
Change-Id: Ieffaf015f8e60ca6ac6f85eb9e2756e480060b4f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch reverts the last attempt to fix it:
4a1de178c9.
In addition, instead of using imprecise QTest::qSleep()
we trigger a single shot PreciseTimer twice
and gather the measurements in lambdas.
We wait for lambdas to be executed - we give it
twice as much time as is in theory needed.
Afterwards we verify all the data collected in lambdas.
Fixes: QTBUG-82825
Change-Id: Ib691f5f23a92fb8b41a24f7b603981d9c9450ddc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This mostly reverts change 76e8e8e9c8.
The reason is that storing non relocatable types inline in
QVariants storage would implicitly make QVariant non relocatable.
Fixes: QTBUG-87686
Change-Id: I2a09b1dcdd907d60085dccf17f987086dcba878c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This saves duplicating them with its own flags.
Task-number: QTBUG-85700
Change-Id: I9e938322fd787282cfd9f941f83af8c0d76aaa9d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This way we can actually modify the container. Previously the interface
was rather useless.
Change-Id: I278aae46999862ada115c9066a010d7de5cde4ff
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The high-level iterable interfaces should coerce the types of most
QVariants passed to the expected ones. To do this, move the type
coercion code into qvariant.{h|cpp} so that it is available to the
QVariantRef specializations.
The exception are variants passed to the find() functions of associative
iterables. Here, we should not coerce values we cannot convert to the
default-constructed keys. Instead we return end() in such cases.
Fixes: QTBUG-87687
Change-Id: I0bd4e5c4e4e270dd3bf36cb3fb115794828077f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This simplifies code that would otherwise need to use the setter and
getter in addition to the bindable.
Change-Id: Iec6510b4f578f5b223c63b3a0719257a0cf2463d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use a simpler constexpr to generate type name on gcc This
works around an ICE on gcc in release mode when compiling
with PCH enabled. As the type we're getting from Q_FUNC_INFO is
already in a somewhat normalized form, this requires significanlty
less processing and esp. not a recursive constexpr method which
I suspect triggers the ICE.
Fix integer type conversions to also properly normalize long long
values (to q(u)longlong. Make sure the mapping also works on
MSVC, where long long types get mapped to __int64. Also, normalize
unsigned short and unsigned char to ushort and uchar, respectively, to
follow the convention set by uint and ulong.
Add some test cases to verify the mappings.
Change-Id: I3dec5764450bf22ab6f066597803c3f46c2cd5ac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As propertyobservers can execute arbitrarily complex code, they can also
modify the obsever list in multiple ways. To protect against list
corruption resulting from this, we introduce a protection scheme which
makes the list resilient against modification.
A detailed description of the scheme can be found as a comment in
QPropertyObserverPointer::notify.
Task-number: QTBUG-87153
Change-Id: I9bb49e457165ddc1e4c8bbdf3d3c9fbf5ff27e94
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently
A a;
QVariant::fromValue(&a).value<const A*>() == nullptr;
Still casting non const to const is safe, and worked in Qt5.
After this change
A a;
QVariant::fromValue(&a).value<const A*>() == &a;
Change-Id: I257049d084c712b00a338a2943d379aa478e0981
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before we had the option of eager evaluation, we were able to use the
dirty flag to detect whether we are recursing. However, eager properties
will lead to a evaluateIfDirtyAndReturnTrueIfValueChanged call, and that
in turn will clear the dirty flag.
Introduce a new member to detect that situation, and set the bindings
error state to BindingLoop if we detect that kind of loop.
Change-Id: If40b93221848bd9e9422502318d992fad95b0b74
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
MSVC has strange problems with it and we don't actually need it.
Change-Id: I2c443946d52d475208800f310b5f910da165c99b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In order to modify a container through an iterable, we need the original
container to be mutable. The iterable, then, is not a conversion of the
container, but rather a view on the container. The concept may be
extended to other types.
In order to facilitate this, provide a set of methods in QMetaType and
QVariant similar to the convert family. The new methods are non-const
and expect the original value to stay available during the life time of
the view.
Change-Id: I363621033f7fc600edcea2acb786820ccba49c86
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And add mutable iterators. This requires some refactoring of the
existing iterators.
Task-number: QTBUG-81716
Change-Id: I61b3a3e8c0df5fd449679257a29d9f0c3d19c4f0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use QVERIFY in test functions, and (void)tr.load outside.
Change-Id: I18d2eb3aeaf00f9f2bbe75d0a2d8b12569b541e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
When QCoreApplication object is instantiated, creation of the internal
message window is delayed until QEventDispatcherWin32::processEvents()
is called or socket/event notifier is registered. But, if the user uses
a native event loop, posted events are not delivered and timers do not
work.
This problem was fixed in a4ac4b3263 for
QWindowsGuiEventDispatcher in the same way. So, the risk of regression
is minimal.
Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Instead of using imprecise QTest::qSleep() to estimate the
elapsed time, we trigger a single shot PreciseTimer and
gather all the data in lambda. We wait for lambda to be
executed - we give it twice as much time as is in theory
needed. Afterwards we verify all the data collected in lambda.
Task-number: QTBUG-82903
Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some CMake files currently assume that QtGui is always enabled and we
get a configure-time failure without these changes.
Task-number: QTBUG-86053
Change-Id: I28e32c180c32221f32519017bac6b518a19d5983
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires refactoring of QMetaSequence, as they share a lot of
common functionality. QMetaAssociation provides a low level interface to
an associative container.
Task-number: QTBUG-81716
Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were starting to run out of space for builtin core types.
Remap the type id's to create lots of additional space.
We now reserve the first 64k id's for Qt, and have 16k id's for
Qt Core. That should hopfully be enough for a while ;-)
Fixes: QTBUG-85914
Change-Id: I0dab6bf23652e46a9557d9b38af7990b68c572b6
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
They were disabled in ad0e3e26fa,
but that was probably accidental.
Change-Id: Ia9cbccfbeecfe84768c3465f5699ed44b7f932a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide functionality to add and remove values, so that you can use a
sequential iterable as stack or queue if the underlying container
supports this. To this end, provide a way to specify whether the
value should be added or removed at the beginning or the end of the
iterable.
Change-Id: If63d302f3ca085e56d601116ce4dfaa6b94a0c4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For completeness' sake we should expose this. The iterators provided by
QIterable and friends will check the category at runtime, and should give
sensible feedback.
Change-Id: I778894f340c862f79a18c6c5607bcbba98dd7598
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is so that they are in line with the "value_type" usually found in
containers. Associative containers have "key_type" and "mapped_type" and
we will use those names for access to elements in QMetaAssociation.
Using "value" as name for sequential containers improves consistency.
Change-Id: I628b7e1446bb2d56843b843bca72d279a6b247e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looks this is redundant in fact and unneeded. The check can never be
evaluated to true, since if so, it would mean it had failed in the
previous iteration, in which we already handled the exit from the loop.
Fixed also some comments.
Task-number: QTBUG-83419
Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before, we used not so accurate QTest::qWait(50)
to measure the accuracy of more precise timer's interval.
In addition, the checked range for remainingTime (50, 200)
was probably wrong, since by definition it couldn't be more than 150,
as we started the timer with interval of 200 and waited at least 50.
In this fix we have additional "tester" timer to measure remainingTime
of "tested" timer. The "tester" is a singleShot timer with interval of
50, and is started together with "tested" timer. Whenever the "tested"
timer timeouts, it restarts the "tester" timer - this is done desired
number of times (2 by default, like in the original test).
The test itself lies now inside tester's lambda. We fix the tested
range (at least 1, no more than 150). The minimum value could in
theory be greater, but it's enough to test that it's not overdue.
Finally, we wait for expected number of test runs. We give it twice
as much time as is in theory needed.
Task-number: QTBUG-83419
Task-number: QTBUG-58519
Change-Id: I43836d787d804f22bb66515ebb215d040189c4f3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So far QPropertyAlias was limited to working with QProperty<T>.
Change the implementation, so it can be constructed from any
property or even a QBindable<T>.
Change-Id: I175cffe94a9ef332367d39faa976eb065b0e6ffe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a new BINDABLE declaration to the Q_PROPERTY() macro that tells moc
where to find the QBindable for the property.
Add a QUntypedBindable base class to QBindable<T> that gives access to
generic functionality and checks argument compatibility at runtime.
QBindable<T> will still do static checking at compile time.
Add QMetaProperty::isBindable() and QMetaProperty::bindable()
to be able to dynamically access the binding functionality.
Change-Id: Ic7b08ae2cde83fd43e627d813a886e1de01fa3dc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a compatibility property class that makes porting to the new
property system as simple as possible.
Binding evaluation for those compat properties is eager, as we
do not control possible side effects of the code in the existing
setters.
Change-Id: Ic56347abb49e40631ec73e88c6d40d4bdb05ca29
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a QObjectComputedProperty. This class doesn't store the data
itself, instead relies on a getter method to compute it's value.
As the property is read-only, one can not bind to it, but it can
be used in other property bindings.
Change-Id: I0f6bffdd9f80f1d0829826f93a47257f2b3127af
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add Q_OBJECT_BINDABLE_PROPERTY() macro that can be used to define
a bindable property inside QObject.
The macro and the class behind it creates storage for a property
that is bindable inside a QObject or QObjectPrivate. The property
only uses as much space as the data contained, ie. it has no
storage overhead, as long as no bindings are being used.
Bindings are being stored and looked up in the QBindingStorage
associated with the owning object.
Change-Id: I1dadd7bddbad6fbf10cfa791d6461574b9db82dd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add a private QBindableInterface and a public QBindable<T>
class, that will be the API interface for accessing bindings
for properties in QObject.
The QBindable class gives access to all aspects of
the property related to bindings. This includes setting
and retrieving bindings, installing observers and creating
a direct binding on this property.
Change-Id: Iaead54d2bd6947bd2cda5052142b2a47dd8bf7c4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
These look rather weird, an explicit property.setBinding() call
is simply better in this case, and also more aligned with the API
we can offer in QObject.
Change-Id: Ifb00fd47a75e6b3bc94e34bf49e4f13249565bfe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And all related functionality. This is being replaced by
Q_BINDABLE_PROPERTY and Q_OBJECT_BINDABLE_PROPERTY in the
next few commits. The new infrastructure coming will play
nicer along with the existing property system.
Commented out some autotests, that will get reimplemented
with the updated infrastructure.
Change-Id: I50c30bd4d5c6c6b6471f8eb93870e27d86f5a009
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Rename QPropertyBase to QPropertyBindingData, as it contains the
data related to bindings. The new name fits better, as the data
can now also live somewhere else than the data strored in the
property.
Change-Id: I489efb86ad2e0bad2740c9d1aa74506fe103d343
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Since we will be storing property data differently in most cases,
having this special case would create too many additional complications.
Change-Id: I27042b0730559bb375d8e3c07324398403a9885d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Enable the arrow operator for all types that could have members, so
that one can e.g. write myStringProperty->size() instead of having to
use the less convenient myStringProperty.value().size().
Also cleaned up the rvalue ref overloads to be
disabled for basic types. For those we now also
return by value, for more complex types we
return a const reference.
Change-Id: If6a75898dc0a097f57052488f0af0cd7166b3393
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If one needed to listen to a signal just once, one had to
store the QMetaObject::Connection object returned by connect()
and use it to disconnect the slot after the first signal
activation.
This has led to a proliferation of using wrappers (and enough
TMP); they usually look like this:
1) create a shared_ptr<QMO::Connection>, allocating its payload;
2) create a lambda, capturing the shared_ptr by value;
3) in the lambda, disconnect the connection (through the shared_ptr),
and call the actual slot;
4) connect the signal to the lambda, storing the returned
QMO::Connection into the shared_ptr.
This is expensive, error prone for newcomers, and tricky to
support as a general facility inside one's projects.
We can do better, just support single shot connections right
in QObject.
[ChangeLog][QtCore][QObject] Added the Qt::SingleShotConnection
flag. When a connection is established with this flag set,
the slot is going to be activated at most once; when the signal
is emitted, the connection gets automatically broken by Qt.
Change-Id: I5f5feeae7f76c9c3d6323d841efba81c8f98ce7e
Fixes: QTBUG-44219
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
One could guess it by assuming that disconnecting for a destroyed
receiver and disconnect() with given receiver use the same
implementation, but without closely knowing the implementation a
reader of the documentation can't know for sure.
Also add a test to prove that what the new documentation says is
really true.
Also remove an unnecessary negation in the preceding sentence.
Change-Id: I9d24442bb1a4646b89f969bad1a4d0e1eafa7534
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is in line with QMetaType and will be used to implement a mutable
QSequentialIterable. Later on, a QMetaAssociation will be added as
well, to implement a mutable QAssociativeIterable.
The code here represents the minimal set of functionality needed to have
a practical sequential container. The functionality is not completely
orthogonal. In particular, the index based operations could be
implemented in terms of iterator-based operations.
Task-number: QTBUG-81716
Change-Id: Ibd41eb7db248a774673c701549d9a03cbf2e48b6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Since 5.0: assignment/construction from QObject pointer
Since 5.14: data() to recover the packaged pointer
Change-Id: I5d6ab561ce39bc0d9d3e5035eb2ca38139cd76b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add Q_REQUIRED_RESULT to force callers to check the return; the
QTranslator object is unusable if load() fails.
Check the result in QTranslator's own test.
Task-number: QTBUG-85700
Change-Id: I07509c76470cc87626190670665cd3162bfb17e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As there is now a chance that a QMetaMethod already contains the
metatypes for its arguments, we can just query it directly (and use the
fallback to name lookup logic that already exists there).
This also allows us to avoid creating a QList of names, and only
requires us to do a name lookup in case the connection actually fails.
Change-Id: Idda30bc4b538a94476ae6c533776c22340f0030d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCoreApplication has a special internal mechanism to control whether
the event dispatcher should block after delivering the posted events.
To handle queued connections in nested loops properly, we should use
that functionality.
Pick-to: 5.15
Fixes: QTBUG-85981
Change-Id: I124179a23b26a995cf95ed379e97bfa62c95f42a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Better to provide the correct meta type to convert to.
Change-Id: I8e0d46e4ba482186201c157e302c03874bd38e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's only used for dynamic types in DBUS and QML, where we control
things good enough to be able to handle the lifetime of those
interfaces there.
Change-Id: Ia7f8970d17a85b195db85fcdc2d8f1febd8753f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Those were not yet supported by QMetaType.
Change-Id: I9f85476049f200e35939ac58ef7e8b4e7cbe0b77
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the fact that we return the conversion function as a lambda
to find out reliably whether a conversion between two types
can be done.
This requires some minor adjustments to our tests:
* Nothing can convert to an unknown type and vice versa
* Adjust results to the fact that we don't convert from char
to QString anymore (where the old method was incorrect)
* QStringList->QString requires some adjustments, as we only
convert if the string list has exactly one element. For now
we return true in canConvert(), but the conversion behavior
in this case is something we should rethink, as it is very
surprising.
Change-Id: I3f5f87ee9cb99d690f5a7d13b13d6a6313d8038e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Take the opportunity to properly handle the underlying type
(size and signed vs unsigned).
Change-Id: I0cb8cf40acac6de03c24ed3fe570db68268952c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will ensure full symmetry in what QVariant and
QMetaType support. With this done, QVariant will become
simply a container that can hold any QMetaType with fully
symmetric functionality between both.
Change-Id: I796d4368a2bc0f08cf4f70f4465ed6a0e07bdd76
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
There's no point in storing small types with an external
refcount, even if they aren't movable. Simply copying
the type should be faster in pretty much all cases, while
this uses less memory.
Change-Id: I127474f8e3c5fa042f530684f9d5bfccbba134ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor the methods retrieving data in Q*Iterable so
that we don't return pointers with unclear ownership. Instead,
copy the data into a out pointer provided by the caller.
This also means there is no need for the metatype flags
anymore and we can remove those.
Change-Id: I517de23a8ccfd608585ca00403aca0df2955f14b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Store a QMetaType, not a meta type id in the classes.
Change-Id: If27a60512a46fa029cc914d65b8cad7f89d7f3b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the old revision of the interface, this is not
required with Qt 6 anymore, as everything is being
recompiled anyway.
Change-Id: I66070c4dc6b5e2a6d22f5a9ebea7688ed38333fe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The string representation of std::pair<T1,T2> is now always
"std::pair<T1,T2>". This is in line with how we translate QPair,
avoiding typename mismatches that would previoulsy occur, because the
full name of pair on libc++ was "std::__1::pair".
Fixes: QTBUG-84924
Change-Id: Ia6c044a7327d69e4b4f4a31496c6b2408d85ebb9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Andreas Buhr
Fabian Kosmale
Marc Mutz
Lars Knoll
Allan Sandfeld Jensen
Edward Welbourne
Giuseppe D'Angelo
Assam Boudjelthia
Jarek Kobus
Ulf Hermann
Fawzi Mohamed
Alexandru Croitor
Liu Yang
Volker Hilsheimer
Alex Trotsenko
Alex Richardson
Tor Arne Vestbø
Andreas Hartmetz