We define QT_STATICPLUGIN for the plugins in this case, so that they
define the factory functions needed to link them directly into the
test.
Change-Id: I0f2de7bf6bec5a6d53ec9ad92536817c1221b7d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some format and parse tests for time and date-time depended on locale
but had test data for the C locale (so fail if the test-environment
has, e.g., LANG=de_DE@utf8). So impose the C locale (until Qt 6).
The date-time test did *some* attempts at fixing for locale, but
failed to handle am/pm; and we do have "### Qt 6" comments in
Q(Date|Time)+::fromString indicating that we intend to switch these
methods to use the C locale by default (which shall fix this once and
for all). So rip out the incomplete localization now and test we work
properly at least when the locale used *is* C. Add a comment to the
matching QDate test to rip out its (presently adequate) matching code
once we do get to Qt 6 and make fromString() use the C locale.
QDateTimeParser uses systemLocale(), which is initialized the first
time it gets accessed; so we need to frob the locale *early*; doing so
in the test-class constructor is about as early as we conveniently
can; and seems to work (while doing it in individual tests does not).
(There is no point rolling back at the end; the QSystemLocale global
has been set up by then, so the roll-back would merely leave the
global out of sync with setlocale() and the environment.)
Task-number: QTBUG-58728
Change-Id: Ifa6778a80276050a099387a6dab15a1096be7561
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
AİİA.pdf takes 8 QChars, but after lowercasing it takes 10, so the code cannot
assume the length to be the same.
Task-number: QTBUG-58822
Change-Id: Id6fbb99f6afd08ee420099cd66372732d7598d9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLineEdit, QAbstractSpinBox and QComboBox did not notify micro focus
changes to the input context.
In particular, the updates were missed during pre-edit stage.
This change adds the missing bindings to QWidget::updateMicroFocus().
Change-Id: I9a7fff962f46dbabd8fb02836c206bace115793b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
see 5a1b4832a2 for more detail
Task-number: QTBUG-58142
Change-Id: I51851ea9b4fe7b8eeadc452bc3dbb1ea00026d29
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Like the lvalue QVector::append() overload, when we reallocate,
we need to take a copy of the function's argument because the
reference will get stale upon reallocation.
Add a test.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug involving
appending an item already in the container to the container
again.
Change-Id: I06eeed6cb383dd5924e47a302bb3d1666d04c8e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Automount filesystems like /home on many operating systems (QNX and
OpenIndiana, at least) don't like if you try to mkdir in them, even if
the file path already exists. OpenIndiana even gives you an ENOSYS
error.
So instead, let's try to mkdir our target, if we fail because of ENOENT,
we try to create the parent, then try again.
Task-number: QTBUG-58390
Change-Id: Ibe5b1b60c6ea47e19612fffd149cce81589b0acd
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Systematic testing in tst_QStringApiSymmetry revealed a bug in
QStringRef::toLatin1(): a null input did not result in a null output,
but an empty one. This is fixed, for consistency with
QString::toLatin1(), and QString(Ref)::toUtf8(), which behaved
correctly already.
The same bug was found in QString(Ref)::toLocal8Bit(), which is
particularly hideous, as it's documented to fall back to toLatin1(),
which preserves null inputs. Fixed, too.
[ChangeLog][QtCore][QString] toLocal8Bit() now preserves nullness of
the input QString (outputs null QByteArray).
[ChangeLog][QtCore][QStringRef] toLocal8Bit() and toLatin1() now
preserve nullness of the input QStringRef (output null QByteArrays).
Change-Id: I7026211922c287e03d07e89edbad2987aa646e51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
After it started to fail (somehow it's only OpenSUSE 42.1) again and again
and after a quick re-evaluation it appears the logic testing SETTINGS|ACK
is incorrect. We (client side) start by sending the preface and then
continue to send our request(s). The other side (server) starts from sending its
SETTINGS frame. These settings must be ACKed, but apparently it can happen,
that server receives a requests and sends a reply before it receives SETTINGS|ACK,
resulting in replyFinished (replyFinishedWithError) signal and event loop stopping.
As a result - QVERIFY(serverGotSettingsACK) fails.
Task-number: QTBUG-58758
Change-Id: I8184cf459b2b88f70c646171e0115c184237fad1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QDateTime::operator_insert_extract() was setting the time-zone and
taking care to restore it at the end of the test; however, if the test
were to fail, the restore would be skipped. Package the zone-setting
and restore in a class instance, so that premature return can't bypass
the restore.
Change-Id: I3df63260da17e481ef4d0d107d9f0fdea3e147e7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
currencySymbol == "$" does not mean negative currency values will be formatted
as "($value)". With all locales I have on my mac machines (10.11/10.12) the
result is different from what this test expects. Also, the results are very
different for different locales. Apparently, we never saw this problem before
since in our CI "macs" we never have US Dollar/en_US selected in System Preferences.
Task-number: QTBUG-58784
Change-Id: Ic2c3a3172bf1e715e99092ddee8f461b216d995a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The runUpdateMimeDatabase() call was timing out on the CI due to
running out of the default 30s timeout for QProcess::waitForFinished()
(on my machine, that call takes less than 0.5s, reliably...).
Increase to two minutes.
Change-Id: I61b2e060ea9c2508b853847ba7040ad499e0084c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
We can defer the creation until the window is shown.
Change-Id: I3d5b45ae59ee0925996cf12cd46dd574c8c6ef95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add proper support for 'so' and 'bundle' suffixes. Qt wrongly assumes
.so libraries are not versioned on Apple platforms, which is
wrong. Also, the shared library .bundle which is what Apple recommends
instead of .so, are also versioned (not to be confound with the
different Core Foundation bundles, which are directory hierarchy).
For more info, see http://docstore.mik.ua/orelly/unix3/mac/ch05_03.htm.
Especially the part that reads:
"Loadable modules, called bundles in Mac OS X, have the file type
MH_BUNDLE. Most Unix-based software ports usually produce bundles with a
.so extension, for the sake of consistency across platforms. Although
Apple recommends giving bundles a .bundle extension, it isn't
mandatory."
Task-number: QTBUG-50446
Change-Id: Iacd5136397a12d65d83821434f332eb602550b4b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit b0c1e07d64.
The unit tests it introduced trigger errors with the macOS and
Win32 implementations, which means the there's something seriously
wrong with either the API, our implementation or the tests.
Revert for now until this gets fixed. Blacklisting was also the
wrong tool to use. The tests should have used QEXPECT_FAIL.
Change-Id: Ida20c6bbe0c019835a22464535029585e8e1e367
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There weren't any, at all.
Testing on the CI showed that the implementation is broken on
macOS, and, to a lesser extent, on Windows, so blacklist the
failing tests until the implementation can be fixed. No need
to hold back testing the other implementations.
Task-number: QTBUG-58737
Change-Id: I9ae16ab778dbe2e95a6ca5e0bae00df4bad65cb2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since 5.7, QIODevice::peek() implementation is based on transaction
mechanism. While technically it's correct, seeking backward on a
buffered random-access device clears the internal buffer that affects
the performance of reading.
To solve the problem, this patch implements peek mode directly inside
the reading procedure.
Task-number: QTBUG-56032
Change-Id: Ic5269f76e44c491a0309e13aba87fa7cf7b9259f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The controls need to reflect the facts that e.g. maximized and fullscreen
can both be set at the same time, the same way a window can be minimized
and fullscreen.
Change-Id: I7f3e354a5efaefb9f51e6b1f24fa35980fe35899
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes operations like minimizing a window happen "behind the scenes"
because the window is hidden during the state change.
Change-Id: I01a00661e57f2dcfa6aef78ee0cfa36fbed1bb03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I didn't even try to understand what the old code was trying to do;
once you're told by a user that the code is wrong, you see that it is.
Fixed by just using the row as passed to takeRow() instead of trying
to do some storage-index calculations. The m_matrix indexing operator
does it all for us.
Added a test that checks that the expected field widget gets
returned. Fixed expected test data that was wrong, and just checking
that the implementation behaves as implemented, instead of as
documented.
Amends change 8fbae648db.
[ChangeLog][QtWidget][QFormLayout] The functions takeRow() and
removeRow(), new in 5.8.0, now take and remove the correct row.
Task-number: QTBUG-58693
Task-number: QTBUG-15990
Change-Id: I7185ccbc6c03e2579741cad5c0c821d3ed165474
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a non-QString-backed mode (via the (QChar*, int) ctor) was added
for Qt 4.5, the author forgot to adjust the setCaseSensitivity()
function. It still uses q_pattern instead of (p.uc, p.len) as the
pattern for which to create the skip-table. Since there is no
setPattern() overload for this mode, the correctness of the matcher is
not harmed by this, but its performance degrades to that of a linear
scan: the skip-table, being filled from an empty pattern, will be
all-zeros, sending bm_find() into the 'possible match' case at every
character.
Since matching is still correct, but slow, it's not possible to write
a test for this. I did, however, leave my attempts in the auto-test,
for when we add QStringView overloads of setPattern() which will then
be able to expose the bug.
Change-Id: I7b803e8624b0352a0a974900affbbfc0c260d93b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The setData method of an item view would get an incorrect value of a
QDialog's result. This patch changes the order of functions called to
fix that.
[ChangeLog][QtWidgets][QDialog] Fixed a bug where accessing the result
of QDialog's result could yield an incorrect value in some situation
like using it as a delegate for item views.
Task-number: QTBUG-6018
Task-number: QTBUG-12156
Task-number: QTBUG-14430
Change-Id: I6ee4b6e8cacf6a806631c05c6c5dbcff925df65e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove the line setting the DPR from the source; the image
is moved.
Task-number: QTBUG-58653
Task-number: QTBUG-58645
Change-Id: I2de94681459dba1d69dee06da44617fb9fa35bcc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As explained in
https://blogs.kde.org/2009/03/26/how-crash-almost-every-qtkde-application-and-how-fix-it-0
creating dialogs on the stack is a bad idea if the
application or the dialog's parent window can be closed
by means other than user interaction (such as a timer or
an IPC call). Since we cannot know whether Qt is used to
build such an application, we must assume it is, create
the dialog on the heap, and monitor its lifetime with a
QPointer.
Instead of using manual resource management, add a
minimal implementation of QAutoPointer, and use that in
all static get*() functions.
Task-number: QTBUG-54693
Change-Id: I6157dca18608e02be1ea2c2defbc31641defc9d1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When a QFile object is reused, the atEnd() method may return incorrect
values. The reason for this is that QFileDevicePrivate::cachedSize is
not cleared. Setting cachedSize = 0 in the close() method fixes this issue.
Task-number: QTBUG-57698
Change-Id: I828a2cf844e98d581098f2c781fa47d2cd3275ce
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
On macOS, the code that read the plist is using
QByteArray::fromRawCFData. When we return the data directly
we need to detach the QByteArray so that it does not point
CFData's data that will get deallocated just after the call.
Task-number: QTBUG-58531
Change-Id: If829a304b986c99c8fc2aeeb992f2d539a4eef3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calculating the width of a text for drawing decorations on top,
we use the effective advance of the whole text after it has been
through the shaper.
However, in the case of QStaticText and QGlyphRun, there is shortcut:
Since we only have the glyph indexes and position of each glyph,
we use the position + advance of the right-most glyph to find the
right-most edge of the decoration. For this, however, we use the
advance of the glyph *out of context* of the rest of the string,
because the whole idea is to avoid doing the shaping of the string
with every draw call. In some rare cases, the advance of the
right-most character, in the context of the string, is different
from the advance of the standalone glyph.
Now, one way of fixing this would be to store the width of the
text in QStaticText and QGlyphRun, but since it is a very rare
artifact which is barely visible, I have opted to just work around
it in the test instead, the workaround being to force integer
metrics so that we don't get the small 0.2 pixel error.
Task-number: QTBUG-55217
Change-Id: I8d16d52f2ef27275cabb7d3865aeeaa31617ba3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Recent HB changed the way of handling ZWJ/ZWNJ to be more in par
with other engines.
Change-Id: I8abacd195e4b247c8fa6d91ef1086e74da0a1efb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The QFontMetricsF version of the test should not truncate the
returned values, as the results may then be wrong.
Change-Id: I17f97f846bb723709e695e8866e437d6888d275b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OpenSUSE has a bitmap font called "Waree" while the test
is created for the TrueType font which is available on Ubuntu.
The style names are different, so we can use that to check
that we have the right one.
Change-Id: I808d0d1ecde9f10ed7730dc76ab3818490002ba9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As used in recent qtdeclarative commits, so better make sure it keeps working.
Change-Id: I6d0ceda76201e3e7f75661cb6449e1ff32329126
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt already supports high DPI icons using the “@nx” approach, where the
device pixel ratio that the image was designed for is in the file
name. However, our implementation of the freedekstop.org Icon Theme
specification did not support the Scale directory key:
https://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html#directory_layout
This meant that users creating icons via QIcon::fromTheme() did not
get high DPI support. This patch fixes that.
[ChangeLog][QtGui][QIcon] Implemented support for Scale directory key
according to Icon Theme Spec. Icons created via QIcon::fromTheme()
now have high DPI support by specifying the Scale in the appropriate
entry of the relevant index.theme file.
Task-number: QTBUG-49820
Change-Id: If442fbc551034166d88defe607109de1c6ca1d28
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This constitutes a fairly complete submission of an entirely new
floating point type which conforms to IEEE 754 as a 16-bit storage
class. Conversion between qfloat16 and float is currently performed
through a sequence of lookup tables. Global-level functions
qRound(), qRound64(), qFuzzyCompare(), qFuzzyIsNull(), and
qIsNull() each with a qfloat16 parameter have been included
for completeness.
[ChangeLog][QtCore] Added new qfloat16 class.
Change-Id: Ia52eb27846965c14f8140c00faf5ba33c9443976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first one was already suppressed for GCC, so also do that for clang:
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: warning: format string is not a string literal (potentially insecure)
[-Wformat-security]
a.sprintf( zero );
^~~~
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: note: treat the string as an argument to avoid this
a.sprintf( zero );
^
"%s",
The second one could also occur with other compilers, so fix it in a
generic way.
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:6382:5: warning: ignoring return value of function declared with
warn_unused_result attribute [-Wunused-result]
string.repeated(3);
^~~~~~~~~~~~~~~ ~
2 warnings generated.
Change-Id: Id999179e795580a37b5be673ee54d6fa1a006dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
benchmarktests.h:323:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
benchmarktests.h:371:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
benchmarktests.h:417:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
Change-Id: Ica496e3baa19e0701c64222ce8ab92ec94178db7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Because on Windows, the .ini files are saved with CRLF, but the files in
the Qt resource are just LF (.gitattributes makes them so).
Task-number: QTBUG-25446
Change-Id: I5eab0d9620bd1ba675b0a87c554f62cef0f98fcc
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In some situations, this allows for nicer code. It's also possible to
make this constexpr in C++11, whereas the mutable transpose() would
require C++14-style constexpr.
The new function should also be faster, since it just swaps the member
variables.
Because of constexpr-function limitations, the way the return value is
constructed needs to depend on the level of the compiler's C++11 support.
This is not the only class that requires uniform init to provide a fully
constexpr interface (QUuid and QBasicAtomic come to mind), so this should
probably be generalized across Qt at some point.
Added tests.
[ChangeLog][QtWidgets][QSizePolicy] Added transposed() method.
Change-Id: Ic1077a0d5a861e7c63bd1daeeb42b97c3a2f71ef
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Also add a basic test for constexpr expressions involving QSizePolicy.
GCC < 4.8.0 has problems with initializing variant members in constexpr ctors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54922
Instead of revoking its Q_COMPILER_CONSTEXPR, which is a source-incompatible
change, simply note the fact so we can selectively provide constexpr for
QSizePolicy.
Change-Id: Iba8e5a7cdf847d73e8e2b6bb6211fb3c9846aa0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- port from inefficient QLists to QVector
- mark types held in Qt containers (incl. QVariant) as Q_MOVABLE/PRIMITIVE_TYPE
- remove pointless user-defined copy special members which prevent the class
from having nothrow move special members
Fixes errors reported by my local tree's static checks.
Change-Id: If3910484cea81a8e2c5ab737908c9443f75782c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The equality operator was supplied, but this one was missing.
[ChangeLog][QtNetwork][QHostAddress] Added op!=(SpecialAddress, QHostAddress).
Change-Id: Iad9c55fa0ee7a8e97d5e4ea4be0605b8b74649d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 7896ae052a. The previous change
focused only on ZWJ and ZWNJ, but there are many other formatting characters
that we need to support and that may be rejected by the German keyboard-hack.
This opens up for all characters in the Other_Format category.
Task-number: QTBUG-58364
Change-Id: Idd967a9ae5b12060c851f6030b7e019508561696
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In tst_QDBusMetaObject::types(), hold a QMetaObject obtained from
QDBusMetaObject::createMetaObject() in a QScopedPointer instead of
leaking it. Use correct return value type.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/dbus.
Change-Id: I1df7f8e42d45f40ecf381fe7b684a8ab5ebee675
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The char* returned from QTest::toString() calls must be manually
delete[]ed.
Change-Id: Iad078e8741e3e97693b1a417693f414b3fb3ec09
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Taken QTreeWidgetItems need to be deleted, as do items
created without a parent, and widgets without parent.
Change-Id: I7ffa69903af9a1b92ba308f9f9416aec1d6d975f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... for calculated test data names.
That involved removing the leading ", " from test name literals
(folding it into the format string) and porting from some QString code
to QByteArray to make the result usable with addRow(), which does not
support %ls...
Change-Id: Icb2344778203f10939ae46b9e46872101f3878a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There was an off-by-one error in the while loop for aarch64: we start
counting at 0 for the first position, so the last valid input position
is "a+7", not 8.
This wasn't covered by the tests, nor was the SSE2 version, so now there
are also tests for both versions.
Change-Id: I7eb8c5708e6179f45ea56885b0e66e1a37969c1d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new QImage method instead of operating on private API.
At the same time the code is improved to ensure the QImage is detached.
Change-Id: Ia015c0bb18d7bc62da38397594730254843e5a0d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not wait up to the timeout ms after already having waited several
times. At the same time upgrade to using the QDeadlineTimer which
is designed for this purpose.
Change-Id: Iaf5e4f4655605d5143ce91040c6eb6706752e504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the qWait() and introduce a QTRY_COMPARE()
checking for the end value first.
Task-number: QTBUG-58402
Change-Id: I2d3758178de5f67881008f28c406076ad27c4a90
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Have a widget-based application that uses qTriangulate for fills
and QTriangulatingStroker (and optionally the dash stroke processor)
for strokes.
The resulting triangle (strip) set is visualized on a simple QPainter
canvas, offering the ability to zoom in and examine how the triangulator
behaves on a number of example shapes. It is also possible to step through
and only have the first N set of triangles drawn.
Change-Id: I3a27d86d4ea13a63dd4be0fe81dd4b5ed6e4fa75
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The regression was introduced in d8857f21ac. The original change was
meant to fix support for SVG icons, but failed to take into account
a valid QIcon with no sizes, but which is also unable to create
a pixmap for the requested size.
Task-number: QTBUG-58344
Change-Id: I7ac1dbfaf6e3dab8581fe4b33c814e2517fcdba8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Rewrite tcpSocketNonBlockingTest() and downloadBigFile() to use lambdas for
the slots. This allows for removing the related member variables and slots
of the test class and ensures no leaks of sockets or inconsistent values.
Add an error handler printing the error message to the flaky downloadBigFile()
test.
Change-Id: Ieb64063c41e045a1a50a6d074bef01753ee319ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Use QTRY_COMPARE with a timeout to check for the stopped state
unless BAD_TIMER_RESOLUTION is defined.
This speeds up the test by 1s and prints diagnostic information
should an interval be too short (as seems to be the case on macOS,
currently).
Change-Id: I8f884cd66ad33314124d3130d9f49606e6dfe9f3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
HTTP Strict Transport Security (HSTS) is a web security policy that
allows a web server to declare that user agents should only interact
with it using secure HTTPS connections. HSTS is described by RFC6797.
This patch introduces a new API in Network Access Manager to enable
this policy or disable it (default - STS is disabled).
We also implement QHstsCache which caches known HTTS hosts, does
host name lookup and domain name matching; QHstsHeaderParser to
parse HSTS headers with HSTS policies.
A new autotest added to test the caching, host name matching
and headers parsing.
[ChangeLog][QtNetwork] Added HTTP Strict Transport Security to QNAM
Task-number: QTPM-238
Change-Id: Iabb5920344bf204a0d3036284f0d60675c29315c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QFileSelector] Removed the requirement for an unused
default base file in case you want to load only a variant.
When the base file (e.g. /image.jpg) was missing, no selectors were
considered and it was not possible to load variants of this file (e.g.
/+android/image.jpg, /+android/+tablet/image.jpg) without specifying the
directory as well.
As a work around, one previously had to place a default file in
the base location, which is undesirable in some cases because:
1. The extra file consumes unnecessary space.
2. It is impossible to encapsulate platform-specific implementation
details by hiding files in a subdirectory.
Task-number: QTBUG-51230
Change-Id: I4c7f9ec952bff6e5b7738d8cabe3c762c208a38e
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
This is a version of QByteArrayMatcher that calculates the
Boyer-Moore skip table at compile-time instead of at run-time,
making this class more generally applicable than QByteArray-
Matcher itself, at least for statically-known strings.
The compile-time part requires C++14 constexpr support, but
the class should compile and work even in C++98 mode, just
with runtime initialization of the skip-table.
While touching tst_qbytearraymatcher, clean up the static
global QByteArrayMatchers there and add tests with needles
longer than 255 characters for QByteArrayMatcher, too.
[ChangeLog][QtCore] Added QStaticByteArrayMatcher.
Change-Id: I0662f262ab19b79ae4096f3ab384d5b3ada72347
Reviewed-by: David Faure <david.faure@kdab.com>
When a platform menu bar is used, the QMenuBar is hidden, so shortcuts
for QActions attached only to it do not work.
Extend the macOS-specific code to treat such menubars as visible to
other platforms, to make the shortcuts work.
The exception is made for internal QMenuBar shortcuts, which are
forwarded to the platform menu. A follow-up change will add support
for this to QDBusPlatformMenu. The updateGeometries() method is called
for platform menu bars too to make sure the internal shortcuts are
registered even if the global menu is in use.
Add two cases to the tst_QMenuBar::activatedCount() test to test
both native and non-native menu bars when possible (it now passes with
native menu bars too).
Change-Id: I2d7128512719ac199cd3f8f7ba28333d04d84ed4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With this new policy, after emitting 'redirected', QNetworkReplyHttpImpl
waits for client code to decide if QNAM should follow this redirect or
not. The client can either allow this redirect by emitting 'redirectAllowed'
or abort the reply.
Task-number: QTPM-236
Change-Id: Ia04619f6bd1f0caa477833ae859b24033027b2e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_qaccessibility.cpp: In member function 'void tst_QAccessibility::treeTest()':
tst_qaccessibility.cpp:3005:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
tst_qaccessibility.cpp:3008:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
tst_qaccessibility.cpp: In member function 'void tst_QAccessibility::tableTest()':
tst_qaccessibility.cpp:3133:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: I175af3215258c70da8284907f5ddfe95abf41029
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QImage::reinterpretAsFormat can be used to change the format of an image
without converting the data, to correct wrong formats or narrow the
format to an opaque one if found to be opaque.
[ChangeLog][QtGui][QImage] A new method reinterpretAsFormat is has been
added to change the format of a QImage without converting the data.
Change-Id: I5e15bc5a1c474a35d3921b06299008ab2effd945
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch makes it possible to enable/disable redirects on QNAM
level (before it was per-request only). This policy would be applied
to all subsequent requests* created by QNAM.
The policies we support at the moment:
a. Manual - that's what we always had - it's up to a user to handle
redirects.
b. NoLessSafeRedirectsPolicy - we allow http->http, http->https and
https->https redirects, but no protocol 'downgrade' (no
https->http redirects).
c. SameOriginPolicy - we check that protocol/host/port are
the same.
Updated tst_qnetworkreply.
*We previously were enabling redirect for each request, by
setting FollowRedirectsAttribute on QNetworkRequest object.
For backward compatibility this attribute has a higher priority
(if set) than QNAM's policy (and it will work as NoLessSafeRedirectsPolicy).
[ChangeLog][QtNetwork] Added redirects policy to QNAM
Task-number: QTPM-239
Task-number: QTPM-237
Change-Id: I493d1728254b71b61b5504937e8e01dca5953527
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The size of flowPositions is larger by one than the number
of rows in the model so the last correct row number is
flowPositions.count()-2, not flowPositions.count()-1.
Change-Id: Idf8bbd155151d553947d5d299dd01ffaff0c95fa
Task-number: QTBUG-47694
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: David Faure <david.faure@kdab.com>
Ulf Hermann
Marc Mutz
Oswald Buddenhagen
Tor Arne Vestbø
Edward Welbourne
David Faure
Jarkko Koivikko
Eric Lemanissier
Thiago Macieira
Liang Qi
Timur Pocheptsov
Friedemann Kleint
Milla Pohjanheimo
Filipe Azevedo
Olivier Goffart
Alex Trotsenko
Jani Heikkinen
Samuel Gaist
Aleksey Lysenko
Thierry Bastian
Eskil Abrahamsen Blomfeldt
Konstantin Ritt
Mitch Curtis
Glen Mabey
Erik Verbruggen
Jake Petroules
Allan Sandfeld Jensen
Friedemann Kleint
Jesus Fernandez
Laszlo Agocs
Oleg Yadrov
Julian Thijssen
Sebastian Lösch
Dmitry Shachnev
Maurice Kalinowski
Mikkel Krautz
Aleksei Ilin