We pass a pointer to uninitialized memory to QMetaType::create().
There's no harm because we're using the invalid QMetaType, but GCC is
actually right to complain for any other type.
qtestcase.h:54:25: warning: ‘buf’ may be used uninitialized [-Wmaybe-uninitialized]
qmetatype.h:454:11: note: by argument 2 of type ‘const void*’ to ‘void* QMetaType::create(const void*) const’ declared here
Pick-to: 6.3 6.4
Change-Id: I3859764fed084846bcb0fffd1703eb7967acf0d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QRegularExpression::match (and globalMatch) is currently overloaded
for QString and QStringView. This creates a subtle API asymmetry:
QRegularExpression re;
auto m1 = re.match(getQString()); // OK
auto m2 = re.match(getStdU16String()); // Dangling
This goes against our decision that every time that there's a possible
lifetime issue at play, it should be "evident". Solving the lifetime
issue here is possible, but tricky -- since QRegularExpression
is out-of-line, one needs a type-erased container for the input
string (basically, std::any) to keep it alive and so on.
Instead I went for the simpler solution: deprecate match(QStringView)
and introduce matchView(QStringView) (same for globalMatch). This
makes it clear that the call is matching over a view and therefore
users are supposed to keep the source object alive.
Drive-by, remove the documentation that says that the QString
overloads might not keep the string alive: they do and forever will.
[ChangeLog][QtCore][QRegularExpression] Added the matchView()
and globalMatchView() functions that operate on string views.
The match(QStringView) and globalMatch(QStringView) overloads
have been deprecated.
Change-Id: I054b8605c2fdea59b556dcfea8920ef4eee78ee9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the QMetaMethodPrivate::invokeImpl() function we added in the last
commit, without recreating the method signature. Instead, only do a
comparison on the method name and allow invokeImpl() to decide whether
this method can be called with the given arguments. This will allow
invokeImpl() to have more flexibility in deciding if the arguments match,
using the stored metatype information.
Change-Id: I36b24183fbd041179f2ffffd17021a86484bfab6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This adds an internal method to QMetaMethodPrivate to do the work of
actually placing the call on a given meta method. This rewrite should
make the code clearer, but make no otherwise perceptible difference in
behavior.
The next commit will rewrite QMetaObject::invokeMethod to use this new,
internal function to avoid doing a lot of string allocations.
Change-Id: I36b24183fbd041179f2ffffd170219c0deaaf7f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is in use in tst_qdbusinterface.cpp, so let's have it here to make
sure it works:
QVERIFY(QMetaObject::invokeMethod(&iface, "ping",
Q_RETURN_ARG(QDBusVariant, retArg),
Q_ARG(QDBusVariant, arg),
Q_ARG(QDBusVariant, arg2),
Q_ARG(QDBusVariant&, retArg2)));
Change-Id: I36b24183fbd041179f2ffffd170271424c048292
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We should fail to even find the method. `QString' and `QString&` are not
compatible.
Change-Id: I36b24183fbd041179f2ffffd170259bcf07fd459
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The type MyUnregisteredType needs to be only forward-declared for the
trick to work. The issue is not about registration, because since commit
fa987d4441 ("MetaObject: Store the
QMetaType of the methods"), we will record the meta type of the type
anyway, which will eventually allow the meta object to actually find
this type.
Instead, the tests are valid for a type that is only forward-declared.
Change-Id: I36b24183fbd041179f2ffffd1702182746f7c1b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In one of the three calls to customConstruct() -- QVariant::detach() --
we've already checked that the type is valid, so don't re-emit the
warning there.
Change-Id: I3859764fed084846bcb0fffd1703a3c7c0fb3164
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This also rewrites QMetaType::id() on top of the helper, with the benefit
of calling a member static function, so QMetaType doesn't need to be
spilled onto the stack. In some upcoming changes I need to ensure that
QMetaTypes are registered so they can be found by name and I'd like to
have a dedicated function name for that, instead of calling .id().
Since I needed to add docs for the new function, I've updated for the
old one too.
[ChangeLog][QMetaType] Added QMetaType::registerType() and an overload
of qRegisterMetaType() taking QMetaType (the two functions do the same
thing). These two functions ensure a given QMetaType is registered with
the Qt global registry, so they can be found by name later. Using
qRegisterMetaType<T>() also accomplishes the same thing, but is slightly
better for completely generic code because it will avoid emitting the
registration for built-in types.
Change-Id: I3859764fed084846bcb0fffd170351d606034c22
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not registered until an ID is assigned.
Pick-to: 6.4
Change-Id: I3859764fed084846bcb0fffd17034f5b369c5b4d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There was an explicit int cast in fromBase64Encoding() which was never
ported to qsizetype and therefore truncated the result.
Fix by removing the int cast.
Add a test, optimize it for as low memory usage as possible, given we
need to work in input and output data each in excess of 2GiB.
Fixes: QTBUG-104985
Pick-to: 6.4 6.3 6.2
Change-Id: I9c0924957e62e5cb3003132cd811b8b0315d8ac1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
So long as you only ask us to copy it. Copying is mandatory, though.
I'll firm up the warning in a later commit, which may not get cherry-
picked as far back.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-105140
Change-Id: I3859764fed084846bcb0fffd170432abf65dc197
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When the method is wrapped into
if QT_DEPRECATED_SINCE(MAJ, MIN)
we also need to add QT_DEPRECATED_VERSION_[X_]_MAJ_MIN macro right in
front of the method declaraion, to actually trigger a deprecation
warning.
This patch does that for QCursor's deprecated methods, and fixes all
related compilation warnings in QtBase.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ic8d059e8c852d4b2dee55e7ea94f4fc7a402cdf4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the metatype does not support copy and default construction, then it
it unsuitunsuitable for use in QMetaType. We cannot prevent users from
passing in such metatypes (as we have e.g. a ctor taking QMetaType), so
verify this in customConstruct, and make the variant invalid in that
case.
Pick-to: 6.2 6.3 6.4
Change-Id: Ib1f0149c8fb9a1cce0049fd0311980754cc85d1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The tst_QByteArray test redefines the QCOMPARE macro to check the LHS
to be NUL-terminated. Because the code was never ported from int to
qsizetype, it fails for QByteArrays of size > 2GiB.
Fix by porting to qsizetype.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104985
Change-Id: Ib3951b0efed5f734ae1324ea2d455bb7762fb9c4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Or the previous limit, 10.
The test has a flaky and failing history, esp on macOS. Trying to
provoke race conditions with more threads than we have cores has little
value.
Pick-to: 6.4
Change-Id: I99dd2b5a6f64faa83963c279c84fc547416f914f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deal with the case that the object gets deleted between a call to
moveToThread and the start of the thread by removing the object from the
list in that case.
Fixes: QTBUG-104014
Pick-to: 6.4
Change-Id: Ib249b6e8e8dfbc4d1332bb99a57fa9d3cff16465
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test has timed out when run on ARM in qemu. We start more threads
than the ideal count, which is likely too much for the emulator when not
running the native architecture.
Pick-to: 6.4
Change-Id: I42e11945070646551e77c10618df762a4bffc8ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If we create a QThread from QThread::current(), we want it to have a
correct value for its bindingStatus. Thus, initialize bindingStatus in
the ctor of QAdoptedThread.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4 6.3
Change-Id: I3ef27ed62c5dc25eed05d551c72743a1b8528318
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Allow specifying the Java class on which to set/get the field via its
corresponding C++ type, removing the need to explicitly provide the
Java type string.
Those were missing from a085a14d76, which
was noticed when porting QtConnectivity over to the new template APIs.
Pick-to: 6.4
Change-Id: I8f324c9fcc486b4c6c2f2b9051f7eca0cbec0e91
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QMetaTypeInterfaceWrapper tries to find the metaObjectFunction using
the MetaObjectForType template. Using SFINAE, for a QObject, it should
resolve to a suitable specialization.
Such a specialization doesn't yet exist. It had to be created.
The following path returns nullptr for registered meta types:
auto metatype = QMetaType(typeId);
requestedTestType.metaObject() -> returns nullptr since a bad template
argument is fed to MetaObjectForType<T> in
QMetaTypeInterfaceWrapper<IneritingFromQObject>::metaType's static initializer.
Change-Id: I8b31c51e12cb19c333e00480b0177354b910ce1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Port the constructor and addData() method to QAnyStringView, but keep
the overloads taking a QByteArray to avoid extra copies when actual
QByteArray is passed. These overlaods need to be Q_WEAK_OVERLOADs, to
avoid ambiguities (e.g. for const char * arguments).
Additionally, add a test to make sure the patch doesn't break parsing
from a QLatin1StringView input.
[ChangeLog][QtCore][QXmlStremReader] Added constructor and addData()
overloads taking QAnyStringView.
Change-Id: I0efaab82a2123271c88407e380f3c67d1099a4a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since wasm doesn't like filesystems that well, we omit this test in
tst_qchar for wasm, this allows us to still run the test without the
case where it needs to read the normalization file.
Change-Id: I37e54d97e119f94e1a9ca53917d0b93183321899
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QString has several functions taking a QRegularExpression: indexOf(),
contains(), and so on. Some of those have an out-argument of type
QRegularExpressionMatch, to report the details of the match (if any).
For instance:
QRegularExpression re(...);
QRegularExpressionMatch match;
if (string.contains(re, &match))
use(match);
The code used to route the implementation of these functions through
QStringView (which has the very same functions). This however opens
up a lifetime problem with temporary strings:
if (getString().contains(re, &match))
use(match); // match is dangling
Here `match` is dangling because it is referencing data into the
destroyed temporary -- nothing is keeping the string alive. This is
against the rules we've decided for Qt, and it's also asymmetric with
the corresponding code that uses QRegularExpression directly instead:
match = re.match(getString());
if (match.hasMatch())
use(match); // not dangling
... although we've documented not to do this. (In light of the decision
we've made w.r.t. temporaries, the documentation is wrong anyways.)
Here QRE takes a copy of the string and stores it in the match object,
thus keeping it alive.
Hence, extend the implementation of the QString functions to keep a
(shallow) copy of the string. To keep the code shared as much as
possible with QStringView, in theory one could have a function taking a
std::variant<QString, QStringView> and that uses the currently active
member. However I've found that std::variant here creates some abysmal
codegen, so instead I went for a simpler approach -- pass a QStringView
and an optional pointer to a QString. Use the latter if it's loaded.
QStringView has some inline code that calls into exported functions, so
I can't change the signature of them without breaking BC; I'm instead
adding new unexported functions and a Qt 7 note to unify them.
Change-Id: I7c65885a84069d0fbb902dcc96ddff543ca84562
Fixes: QTBUG-103940
Pick-to: 6.2 6.3 6.4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's needed in QtHttpServer.
[ChangeLog][QtCore][QDebug] Can now stream QMetaType.
[ChangeLog][QtCore][QMetaType] Can now be streamed through QDebug.
Change-Id: I974d77d678137715472a3907ab1e50ba2dbaa087
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds macros for declaring scoped native callbacks which are
in namespace or for example defined as static class member variables.
The existing macros don't allow this as they use QtJniMethods namespace
and the introduced callbacks' namespaces are not enclosed in that
namespace, yielding a compilation error.
Pick-to: 6.4
Change-Id: I754560bea7e9a1b57c2661d1ee7236e78db39ba1
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's always true these days, assert so in qatomic.cpp and
tst_QAtomicInteger.
Update the docs.
Pick-to: 6.4
Change-Id: I3684cff96c1d2e05677314e29514cc279bd6b1a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The manually defined native JNI function tables allow defining a name
that may be different from the actual function name; this name is then
used from the Java-side.
This can be useful to provide also as an option with the new
"unstringifying" macros which can help for example in porting code
to these new macros.
Pick-to: 6.4
Change-Id: Icfebfb351cb8dfb122795d20b37e2eac167a41bf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Since 4edcea762d the dropsite example
shows markdown if available; and now it shows that when we do DnD
of a selection from the richtext example, text/markdown is available.
- If we artificially make html unavailable, copying and pasting between
widget-based rich text editors uses markdown.
In case markdown writer output contains unnecessary backticks due to
monospace fonts getting used, the workaround from
1ad456c908 is applied.
Pick-to: 6.4
Task-number: QTBUG-76105
Task-number: QTBUG-103484
Change-Id: Ie6ca4dbb450dbc36b3d09fd0df1ae5909aaebca7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is a repeat of commit de6ced6692
"QCborValue: fix incorrect to{Array,Map} when the value is empty" (6.4),
which fixed the same thing for QCborValue. I've just copied the exact
same implementation onto the QJsonValue functions.
Pick-to: 6.2 6.3 6.4 5.15
Fixes: QTBUG-104085
Change-Id: I175efddd75f24ae59057fffd16f6b257bf7ed36d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
If the QFuture is canceled because the associated QPromise has been
destroyed, we still need to run its continuations (i.e. onCanceled
handler, if it's attached), so replaced the cleanContinuation() call
inside ~QPromise() with runContinuation(), which will also take care of
cleaning the continuation.
[ChangeLog][QtCore][Important Behavior Changes] QFuture now runs its
continuations when its associated QPromise has been destroyed.
Previously, if a QFuture was canceled because the associated QPromise
has been destroyed, its continuations were skipped.
Fixes: QTBUG-103992
Pick-to: 6.4 6.3 6.2
Change-Id: Ie05bc760c96c349aade8adb8d2fe5263aff8efac
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Now that QStringConverter can handle non UTF encodings through ICU,
add a way to get a decoder for arbitrary HTML code.
Opposed to QStringConverter::encodingForHtml(), this method will
try to create a valid string decoder also for non unicode codecs.
Pick-to: 6.4
Change-Id: I343584da1b114396c744f482d9b433c9cedcc511
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When assigning the lambdas directly to a function_ref their lifetime is
limited to that of the expression. Store them on the stack first to
avoid the UB.
Fixes: QTBUG-104419
Pick-to: 6.4
Change-Id: I3c85ac683b0bd7768b646dc9d0a1ed4dd173e6f3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Set it to nullptr on clear, and deal with possibly null bindingStatus.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4
Change-Id: I66cb4d505a4f7b377dc90b45ac13834fca19d399
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We missed the terminating ";" in the QSKIP lines.
Amends ea4d6b987a
Pick-to: 6.3 6.4
Change-Id: Ibda43b8a84230c243dbcc74e157f4c3f8ef3891d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Thread termination might prevent stack unwinding, which then
generates ASAN errors such as
ERROR: AddressSanitizer: stack-buffer-underflow on address
0x7f3c1d7858b0 at pc 0x7f3c243d8918 bp 0x7f3c1d7857f0 sp 0x7f3c1d7857e8
Skip such tests so that we can enable blocking CI runs under ASAN.
Fixes: QTBUG-104421
Pick-to: 6.4 6.3
Change-Id: I169235a12190e3f72525cddfe1a44a4bee19eca1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This adds support for additional codecs to QStringConverter when ICU is
available.
We store the converter in the state (d[0]), and its canonical name in
d[1]. We need the name there, as in the clear function we close the
UConverter, and set the pointer to null. Consequently, the actual
conversion functions might need to re-open the converter again. The
advantage of this approach is that clear is used in the destructor of
State, and with this approach we properly clean up the state.
There is however a disadvantage: The clear function was so far also used
for resetting the state when QStringConverter::resetState . Discarding
the whole Uconverter for that is however rather costly. For that reason
we modify resetState to call a new function, State::reset. For existing
converters, it behaves the same as clear; for the ICU based converter,
we call the more efficient ucnv_reset. Code compiled against Qt 6.4 can
benefit from this more efficient version; code compiled against older Qt
versions will continue to work, as the conversion functions can just
recretate the converter from the name.
We can distinguish between ICU and non-ICU converters by checking if the
UsesIcu flag is set.
QStringConverter::name is changed to return the name stored in d[1]. The
interface of the ICU converter has a dummy name, so code using the old
name function from QT < 6.4 still returns something, namely a message
asking the user to recompile.
The function is moved out of line, as we need to check for the private
ICU feature, and want to avoid having that check in the public header.
As the QStringConverter ctor taking a name now can allocate memory, it
can no longer be noexcept. Removing the noexceptness is safe, as it was
only added after Qt 6.3.
Note that we cannot extend the API consuming or returning Encoding, as
we use Encoding values to index into an array of converter interfaces in
inline API.
Further API to support getting an ICU converter for HTML will be added
in a future commit.
Currently, the code depending on ICU is enabled at compile time if ICU
is found. However, in the future it could be moved into a plugin to
avoid a hard dependency on ICU in Core.
[ChangeLog][Corelib][Text] QStringConverter and API using it now
supports more text codecs if Qt is compiled with ICU support.
Fixes: QTBUG-103375
Change-Id: I7afb92fc68ef994179ebc7a3aa73beebb1386204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only way to use them was to put them in a union and then write all
the members of the union to set the various bit ranges. As only one
member of a union can be active at any time, the compiler is free to
optimize those writes away, though. This has started happening in the
wild now.
As we have a replacement, we can remove the old and broken code now.
Task-number: QTBUG-99545
Change-Id: I90718ec06662258d1c15220f54da9eed2186c5a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Thiago Macieira
Giuseppe D'Angelo
Alexandru Croitor
Marc Mutz
Ivan Solovev
Fabian Kosmale
Volker Hilsheimer
Mikolaj Boc
Sona Kurazyan
David Skoland
Juha Vuolle
Shawn Rutledge
Anna Wojciechowska
Lars Knoll
Mårten Nordheim
Allan Sandfeld Jensen
Ulf Hermann
Dimitrios Apostolou
Kai Köhne