The native implementation uses NSAlert, making a best effort to map the
QMessageBox properties to the native dialog, falling back to the cross
platform non-native dialog if the discrepancy is too big.
The initial implementation focuses on the current state of the
native dialog helper "protocol", but there's room for improvement
here, which would allow even more dialog types and properties to
be native.
[ChangeLog][macOS] Message boxes such as QMessageBox now follow
the platform look and feel by using native dialogs if possible.
Change-Id: I4da33f99894194a7b301628cd1fbb44d646ddf18
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Skip on crashing tst_qvulkan test
Blacklisted completer_data on qfiledialog
(8d76c5af51 should have been enough but
it is still failing)
Task-number: QTBUG-108328
Task-number: QTBUG-108329
Change-Id: Iad5573af60cca16d16ba0462293e276186e25653
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This effectively reverts a4a51f6a64
while solving the problem that change intended to fix by an
alternative approach: Swap the order of checks for rhi-based
flushing. Checking the widgets' wishes first was a mistake. We should
first check what is forced, e.g. via the env.vars. Then only move on
investigating the child widget hierarchy if there was nothing specific
requested.
This way having a QOpenGLWidget in a window and running with
QT_WIDGETS_RHI=1 QT_WIDGETS_RHI_BACKEND=vulkan will prioritize the
forced request (Vulkan) and so the QOpenGLWidget will gracefully not
render anything while printing the expected warning to tell what's
going on.
The expensive recursion plaguing the construction of larger widget
hierarchies is now avoided, that should no longer take seconds due to
walking the entire widget hierarchy of the top-level window every time
a new widget is added to it.
However, this then uncovered a set of problems concerning native child
widgets. The repaint manager seems to have an obvious mistake where
the usage of rhi (and so textures and whatnot) is decided based on
'widget' (which is either a top-level or a native child) instead of
'tlw' (which is the top-level with the backingstore). The usesRhiFlush
flag only really matters for a real top-level, not for native child
widgets. The rhi-based flushing is tied to the backingstore, and the
backingstore comes from the top-level widget.
Finally, make the qopenglwidget autotest to actually exercise
something when it comes to QOpenGLWidgets (or their ancestors) turned
native. The original code from a long time ago does not really test
native child widgets, because it turns the top-level into native which
is quite superfluous since the toplevel is backed by a native window
(and a backingstore) anyway.
Pick-to: 6.4
Task-number: QTBUG-105017
Fixes: QTBUG-108344
Fixes: QTBUG-108277
Change-Id: I1785b0ca627cf151aad06a5489f63874d787f087
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
saveRestoreGeometry() somtimes creates a 29px offset when debugged in
Qt Creator, which makes the test fail.
This patch adds a code comment to make developers aware of this fact.
Pick-to: 6.2 6.4
Change-Id: I920bd02eb7543faf8b25a0a242b888f3a3745e2a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
multipleToplevelFocusCheck() occasionally failed on XCB because
QApplication::activeWindow() was nullptr immediately after
qWaitForWindowActive() returned true.
This patch replaces QCOMPARE on QGuiApplicaiton::activeWindow() with
QTRY_COMPARE in order to continue spinning the event loop until the
condition has been met. It adds QWidget::activateWindow after show()
to ensure focus is acquired also when another window has received
focus in the meanwhile.
Pick-to: 6.2 6.4
Change-Id: If84eb8b77c5a6b16af271334a1fe5eb92c05644b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test function raise() occasionally failed because of unexpected
paint events being counted.
This is due to a QTRY_VERIFY returning after consumption of the first
paint event. If more than one paint event got posted, it will be
delivered and counted when no more paint events are expected.
This patch ensures that all paint events are consumed before resetting
the count and expecting no more paint events.
Fixes: QTBUG-68175
Pick-to: 6.2 6.4
Change-Id: I3e91a34e851da4bd01c7429e824d2b9101077a06
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The uses of the click_cocoa_button() function was removed in 2012,
in ba21ca7b5b.
Change-Id: If7abfc56bb307cfbf9f6628cec9c7267a8a1f31f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The usage of the helpers was removed in 2011,
in bf8dfc394a.
Change-Id: I950812982148fd76bcc65c4781a144c21cb3c901
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qWaitForWindowActive was called in two test functions without
activating the relevant widget.
This patch adds widget activation before calling
qWaitForWindowActive.
Helper function verifyColor:
A loop made six comparison attempts of widget size, pixel color and
image with a 200ms waiting time after each unsuccessful attempt.
The widget size was tested at the beginning of the loop.
The test was failed on the first size mismatch, which occurred when
verifyColor was called before the widget was rendered.
That has lead to flakiness (e.g. on openSuSE).
This patch encapsules each check in a lambda and calls qWaitFor to
ensure event processing until each condition has become true.
Change-Id: Ic98f93c8acf41459bc728f2969fe8b01768048dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Follow-up to 8222e06d12, which only reset
the item repaint count.
Flushing the queued paint events will bump numRepaints, and the whole
point of calling reset() is to prepare a consistent state before the
next test, so we need to call it after flushing the events.
Pick-to: 6.2 6.4
Change-Id: Id1fe840c14c0940d7020cf8f8cc6a3aeceaa5fb5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Flushing the queued paint events will bump numRepaints, and the whole
point of calling reset() is to prepare a consistent state before the
next test, so we need to call it after flushing the events.
Pick-to: 6.2 6.4
Change-Id: Iaefc9854caafe82c65c9587e18fd081439e8dda6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qfiledialog test was failing on completer_data test. The fix
available for Android 11 also works in Android 7, so removed the if
clause.
Task-number: QTBUG-105377
Change-Id: I76a4c1073a754c9b299cfe731f42b80da1a6f8e2
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
When a compound widget is created not directly before its children,
then another widget will be in the focus chain between the compound and
the compound's first child. If one of those children is then made the
focus proxy of the compound, then the widget in between becomes
unreachable by tabbing.
To fix this, detect that we set the focus proxy to be a descendent of
the compound widget, and then move the compound widget directly in front
of its first child in the focus chain. This way we can't have any gaps
in the focus chain.
Augment the test case with a corresponding scenario. As a drive-by, move
the debug helper up in the code so that it can be easier used, and set
object names on relevant widgets.
Pick-to: 6.4 6.2 5.15
Fixes: QTBUG-89156
Change-Id: I17057719a90f59629087afbd1d2ca58c1aa1d8f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If we use winrt's factories we have to make sure to to clear the factory
cache when one of our dlls is unloaded or we will run into dangling
factory entries which might result in crashes. So we have to make sure
that winrt::clear_factory_cache is called on every dll unload.
In order not to increase compile times and dependencies too much
qfactorycacheregistration_p.h needs to be included in Qt code whenever
we use winrt's factory cache. A rule of thumb being: Include
qfactorycacheregistration_p.h whenever including winrt/base.h.
Other Qt modules which use winrt's factories need to be updated too.
Fixes: QTBUG-103611
Pick-to: 6.2 6.4
Change-Id: I7ab24e4b18bffaca653c5b7f56a66ce99212e339
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The QHoverEvent ctor takes two points: pos and globalPos; pos is then
passed as both the scene and global pos to the QSinglePointEvent ctor,
which calls QMutableEventPoint::setScenePosition() on the persistent
QEventPoint instance and then detaches befeore setting ephemeral state.
Therefore, we must construct QHoverEvent with scene position first, not
local position, so that the right value is persisted; it's better to set
local position after the detach(), whereas it's too late to fix the
persistent point then.
Pick-to: 6.4
Fixes: QTBUG-106918
Change-Id: I45726a9ec05bba2fe0cde6f5fb87c269105caca6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
-1 is the default value for QSurfaceFormat::alphaBufferSize. Changing it
to 0 may result an unexpected pixel format change by ARB OpenGL
extension.
Pick-to: 6.4
Fixes: QTBUG-107629
Change-Id: Ia6a1b90fba6c43b6872b406f4fd946d937135cf8
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QWindow::requestActivate() is not supported.
This function crashed very often in ci/coin when system is busy.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: I82523080db40bddce9c9dc000433117d8ef74847
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QWindow::requestActivate() is not supported.
This function failed in test vm in coin manually very often.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: I013651b0e5e7618c29742effd85a091ca95a7414
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
setFocus() was called on a double spinbox without calling show()
first. That causes flakiness on XCB when checking focus afterwards.
The test can still fail, when focus is acquired by e.g. a system
popup.
This patch adds a show() call before setFocus() to stabilize normal
behavior. In case the double spin box is shown, but cannot acquire
focus, the test is skipped.
Fixes: QTBUG-70088
Change-Id: If02e88800a31b09a1da63dcc074eb8bb1b0df391
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Allocate the QSplitter on the stack so that it and its child widgets are
cleaned up when the test function finishes.
As a drive-by, replace QString usage with QByteArray to avoid unneeded
conversion from and to latin1, and modernize list construction and for loop.
Pick-to: 6.4 6.2
Change-Id: I2e29961edbab1ec88be356fca6bc100f08894e82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
None of these users require C++20 constexpr or C++23 noexcept, the
only remaining difference between std::exchange and qExchange.
This leaves a single qExchange() user, in QScopedValueRollback, that
requires the constexpr version, only available from C++20, and thus
remains unported.
Task-number: QTBUG-99313
Change-Id: Iea46f6ed61d6bd8a5b2fd9d9ec4d70c980b443a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Skip tests that depend on programmatic window activation on platforms
where this is not supported, such as Wayland.
- Change tests that don't rely on the window being activated to use
qWaitForWindowExposed() instead.
Task-number: QTBUG-107153
Pick-to: 6.4 6.2
Change-Id: Ieb4280343a725a2cbdc46a8ac5c657beeb2e7e57
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
focusProxyAndInputMethods tests focus acquisition and inheritance with
a toplevel widget, acting as a focus proxy for a child.
X11 window managers are set to be bypassed, programmatic focus is set
with QApplicationPrivate::setActiveWindow().
The test is flaky on Linux/XCB, and therefore blacklisted on most
Linuxes.
This patch removes focusProxyAndInputMethods, considering that
- focus proxying is tested in tst_QWidget::focusProxy()
- window activation and focus inheritance are tested in
tst_QWindow::isActive()
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I510fd935399d9ad0b6cd76f1bd5db0811e0702f6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The placeholder text was given its own QPalette color role in Qt 5.12,
but there has been no way to specify it from a Qt style sheet.
Fixes: QTBUG-93009
Change-Id: If58ca844c19c65b7eee14c6d5730a4ba27640c33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Prior to 5.12, the placeholder text color was hardcoded to be the same
as the text color, but with an alpha of 128, i.e. semi-transparent. In
5.12, it instead got its own ColorRole in QPalette. So behavior
changed (In some cases in 5.12 and later, consistently from Qt 6):
placeholder texts no longer got a "light" (semi-transparent) version
of the css-styled color, but just the default gray/semi-transparent
black. That problem was reported as QTBUG-89815. However, the fix for
that bug did not apply the semi-transparency, but only used the same
color as the text. That caused a confusing visual expression, as
actual and placeholder text would look the same. This commit fixes
that.
The problem was made worse since there is no way to specify the
placeholder text color from css, i.e. to style it independently. A
follow up commit will aim to add that.
Fixes: QTBUG-92199
Task-number: QTBUG-93009
Pick-to: 6.4 6.2 5.15
Change-Id: I9e6698d34eba91cbf65c4da07aa5ac6d9f96a9ed
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QDockWidgetLayoutState::itemRect() has been used to calculate a dock
widget's size when unplugging from the main window. This method is meant
to calculate the size of the rubber band, showing the dock widget's
dock area.
The rubber band is by QDockAreaLayout::sep wider (top or bottom dock)
or higher (left or right dock) than the respective dock widget. This is
to make sure the rubber band is never fully covered by the dock widget.
By wrongly using itemRect() also for the dock widget's size after
unplugging, the dock widget grows in size each time it is unplugged.
This patch passes an invalid QRect to QDockWidgetPrivate::unplug(), in
order to prevent resizing.
tst_QDockWidget::unplugAndResize() is extended to check size
consistency after unplugging (corrected for frame margins).
Fixes: QTBUG-106531
Pick-to: 6.4 6.2
Change-Id: I1cf9f695691b0e165a5cb2881781602426e5d587
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Tor Arne Vestbø
Samuel Mira
Laszlo Agocs
Axel Spoerl
Volker Hilsheimer
Marc Mutz
Heikki Halmet
Andreas Buhr
Mårten Nordheim
Shawn Rutledge
Peter Varga
Liang Qi
Eirik Aavitsland
Edward Welbourne