Amends 1d961491d8. We modify the resolve
mask after making a shared copy of 'other', so we must detach. Call the
setter designed for that purpose.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-98762
Change-Id: I4f45223e74764a341378992172787fae73efb8b7
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
56bd1b76d2 changed the update
resolve mask behavior in QPalette to avoid detaching brush data
when modifying the resolve mask if the brush value is not changed.
But this behavior broke compatibility, it introduced unknown risks, and
we cannot ensure that other code in Qt does not depend on the old
behavior.
We both need to ensure that we don't detach when the value is not
changed, and ensure that the resolveMask is always updated regardless
of whether the value changes, so we need to split them up and
independently share the brush data.
QFont will update its corresponding resolveMask even if the value has
not changed, so it is better to correct this behavior so that QPalette
and QFont are consistent.
[ChangeLog][QtGui][QPalette] Always update resolve mask in
QPalette::setBrush, even if the value of brush has not changed.
Fixes: QTBUG-98762
Pick-to: 6.4 6.3 6.2
Change-Id: Ib845361b30f21c3d78c16ced923c1678b12e05ac
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unblock the qtdeclarative dependency update.
This behavior change is causing a regression for QQmlPreviewHandler's
zoom feature. Back out of the change for now, until we can find a way
to make both use cases work.
This reverts commit 1c0a56a2f3.
Change-Id: I1b3d84504bbcb4f2b2250a20194fdaf4ab4fd97f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QFutureCallOutEvent is used externally, so it needs to be exported.
This reverts commit 3141a13b2a.
Fixes: QTBUG-104732
Pick-to: 6.4
Change-Id: I82c9e7414192ee948f78259bd74a404691a7805a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QT_SCREEN_SCALE_FACTORS in many cases set on behalf of the user,
instead of by the user, so we should make it less sharp and more
in line with standard high-dpi configuration.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Pick-to: 6.4
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: Ibb0aa5cb9d3a356d33429d0efe69d984b2530728
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test setting both via QGuiApplication property and environment.
Change-Id: Iaccc920adb6294d610b02d4c844aa5b15eb7eecd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Under normal circumstances, when the second point is touched, the
first point has not been released, and the message at this time
should contain two touch points. We are simulating the case where
the message is lost when the popup is closed by touch. Amends
efc02f9cc3
Pick-to: 6.4 6.3 6.2
Change-Id: Ic722e3dbd615c46076ede26611d0107501c5e274
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
More specifically, if either minimum or maximum size are updated, make
sure that the current window geometry is updated so that it is within
the minimum and maximum sizes.
Previously, these constraints was only respected by the window manager
when the user resized the window.
For widgets this already worked, because a top-level widget will take
care of respecting these constraints if they are changed.
Since QWindow::setMinimumSize and QWindow::setMaximumSize started to
share so many common things, a new function (setMinOrMaxSize_helper())
is added.
Task-number: QTBUG-102771
Change-Id: Ia4b2680dcf865f84a3cf6424187f9a6036b76386
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The issue is that when someone is trying to use the following code:
QKeySequence keySequence(Qt::Key_Shift);
qDebug() << keySequence.toString();
This will print seemingly gibberish output. It is unicode in practice. For
Qt::Key_Shift, this would be: "�_@\uDC20"
The reason why this is happening is because we have platform-specific ways to
handle this due to Mac glyphs which are not available on Linux or Windows. This
works fine on Mac.
But for the Linux and Windows codepaths, there is not really any mapping like
for other keys. It seems that modifiers were left out.
The solution is to simply amend the list of mapping from these modifier key
codes to raw strings for Linux and Windows like it is done for other key codes.
So, now, modifiers will also be included in the list.
So, the expected output will be generated for the above code, as: "Shift".
[ChangeLog][QtGui][QKeySequence] Added missing modifier names
Fixes: QTBUG-69715
Fixes: QTBUG-40030
Change-Id: I460d54bc8e593b350ff95894f23c5b4a7c819a44
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When XCB_INPUT_TOUCH_BEGIN closes a popup, we then receive
XCB_INPUT_TOUCH_END, and cannot find a target window (because it's
destroyed). If we don't deliver it, we need to at least clear the
stored point from QPointingDevicePrivate::activePoints. Then when
we deliver the next touch press, m_fakeMouseSourcePointId also
needs to be reset.
It's now even more paramount that autotests (and real-world
touchscreens) must never omit any active touchpoint from a touch event.
If a point doesn't move, it must be included in the QTouchEvent, with
Stationary state. If not, QGuiApp::processTouchEvent() could generate
multiple TouchBegin events in a row, which gets other bits of logic
confused, here and there.
Fixes: QTBUG-94557
Fixes: QTBUG-98519
Fixes: QTBUG-102751
Fixes: QTBUG-103706
Pick-to: 6.2 6.3 5.15
Change-Id: Ia95e410a2bb8bc7784aa5d296fac2b89e53a9f55
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
If all the palette's colors are resolved, nothing needs to be done in
QPalette::resolve(const QPalette &other).
Change-Id: I1573cfa5b5cd1e7eb15f3242aff6ab92e9f8c84b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A previous commit Q_CORE_EXPORTed this class so it could be used in
tst_qevent. But we can also keep it Q_AUTOTEST_EXPORTed and make the
testing of the class subject to QT_BUILD_INTERNAL on the test side.
That's what this patch does.
Change-Id: I9bd5f80ada856b7db4b39dfb59b32bd825416c13
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
There's no advantage to them being inline: Absent de-virtualisation,
clone() is only supposed to be called through the vtable, and the copy
ctor is only supposed to be used in the implementation of clone().
And when the compiler de-virtualises, we don't want the code
duplication associated with inlining.
Enforce this by introducing new macros to hide the boilerplate.
This fixes missing out-of-line dtors in:
- QSinglePointEvent
- QApplicationStateChangeEvent
- QFutureCallOutEvent
Wrong covariant return in:
- QFutureCallOutEvent
And missing clone() reimplementations in:
- QCloseEvent
- QIconDragEvent
- QShowEvent
- QHideEvent
- QDragEnterEvent
- QDragLeaveEvent
While these don't carry extra data or members, a dynamic_cast of the
result of clone() as well as using the expected covariant return value
would fail:
QShowEvent *e = ~~~;
QShowEvent *e2 = e->clone(); // ERROR: converting QEvent* to QShowEvent*
Check that reimplementing clone() is binary compatible (covariant
returns may change the numerical pointer value returned, cf.
https://community.kde.org/Policies/Binary_Compatibility_Issues_With_C%2B%2B).
The copy-assignment operator stays inline for the time being, as the
goal is to = delete it in the future.
This patch covers, roughly, QtCore and QtGui.
[ChangeLog][QtGui][QEvent subclasses] Fixed missing clone()
reimplementations on QCloseEvent, QIconDragEvent, QShowEvent,
QHideEvent, QDragEnterEvent, and QDragLeaveEvent.
Task-number: QTBUG-45582
Task-number: QTBUG-97601
Change-Id: Ib8a0519dbe85a7a8da61050d48be338004dfa69a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two things are done here:
- use showNormal() instead of show() to get an expected widget size.
- skip the test if HighDPI scaling is enabled with non-integer scaling
factor, because there can be rounding errors.
Fixes: QTBUG-87390
Pick-to: 6.3 6.2
Change-Id: I653a17bac2142838b03a328e1629582384b6c7b3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Don't use deprecated methods in tests, and don't refer to them in
documentation.
Change-Id: I110480742d9a7b9b0a2e194e3fe610208c1e07da
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
On Wayland, there is no protocol to do it yet.
Task-number: QTBUG-100792
Task-number: QTBUG-101145
Change-Id: Id72625a8161359111a2d0f43f3215e787778ba6b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
for QInputDevice::primaryKeyboard() and
QPointingDevice::primaryPointingDevice().
This also reverts ae9fefe3c8.
Fixes: QTBUG-100790
Pick-to: 6.3
Change-Id: Id02f277db25f823eb29e939e25801325df8e4076
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is not only flaky on Windows 10 but also on Windows 11.
Pick-to: 6.2 6.3
Task-number: QTBUG-100412
Change-Id: I27e8179dafd4743c3eaf2c0dd8b70b804612c7c2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On X11 we already had to wait as window managers might scroll windows
in. On macOS we also waited - albeit a bit shorter - also because
screens scroll in slowly.
We didn't wait on Windows, and on Windows the test is quite flaky.
Attempting to make it run stably by waiting for long enough so that all
paint events are flushed to the screen.
As a drive-by, break some overly long lines.
Task-number: QTBUG-100412
Pick-to: 6.3
Change-Id: I49b1e447aced2fe1af3c5d30b514f8df3cc1813c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test also fails on Windows 11
Pick-to: 6.2 6.3
Task-number: QTBUG-98475
Change-Id: Iab079587d743500d222f2272d1145424e079b4a3
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
If id == 0, then we should grab the specified rect from the screen.
To do that, find all windows intersecting with the screen geometry, and
compose their backing store images into a screen-size pixmap.
Otherwise, find the respective backing store and grab only that.
Remove the old code respecting the desktop widget, which is no longer a
thing in Qt 6. The code was also wrongly grabbing only the first
containing - not intersecting - window's backing store into the screen
pixmap.
Enable the QScreen::grabImage test for the offscreen platform, where it
now passes.
Task-number: QTBUG-99962
Change-Id: I16eca7b082d65095a62c73624f86a4423e997a7a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This code didn't actually use QMutableEventPoint::from(), so didn't
run into the UB that from() depended on, but it's in the way of making
QMutableEventPoint a befriendable namespace instead of a public
subclass of QEventPoint.
Replaced the QMutableEventPoint ctor that takes a timestamp, and
therefore isn't compatible with the ctors on QEventPoint, with a
static function that returns QEventPoint instead.
Port QList initialization to braced-initialization as a drive-by.
Task-number: QTBUG-99615
Pick-to: 6.3
Change-Id: If5a1dbea21cc31cdefdb640716793421c8ec0af4
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The header no longer uses QMutableEventPoint.
Fix TUs that relied on the transitive include.
Task-number: QTBUG-99615
Pick-to: 6.3
Change-Id: Iae4ff34ea708304fcd365fd763875dd4a97a1cf8
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test is impacted by the position of the mouse cursor, and fails if
the mouse enters the test window when it gets shown. Try to move the
cursor away from the window.
As a drive-by, const'ify some of the local variables.
Revert 7b4b5115dd by removing the
blacklisting of the test on macOS in CI.
Pick-to: 6.3 6.2
Change-Id: Ia0c554fdf161fd4eb4aa3965e937c7db8ceeef8f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
setPos() takes a screen argument, however this argument
indicates which cursor should be moved only and is
not usable as an argument to toNativePixels() since
the position may be on a sibling screen.
Add call to QScreen::virtualSiblingAt to get the target
screen.
Task-number: QTBUG-99009
Pick-to: 6.3 6.2 5.15
Change-Id: I8714ebc93a283c58bc67911315f787c484fb0dd8
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QWidget and QWindow use bits in QObjectPrivate to provide for a couple
of shortcuts -- one in qobject_cast, and another in the isWidgetType() /
isWindowType() functions in QObject. These can be optimized by simply
looking at the bits, without actually doing more expensive runtime
casts.
These bits were set on construction, but not unset on destruction. The
result was for instance that destroying a QWidget would report that the
object was still a QWidget when ~QObject was reached.
Fix this
1) by setting the bits only when QWidget / QWindow constructors start;
2) by resetting the bits once ~QWidget / ~QWindow are completed.
Technically speaking this is not 100% correct in the presence of data
members, but luckily those classes don't have any.
Amend an existing test for QWidget (whose comment said exactly the
opposite of what the test actually did) and add a test for QWindow.
Some other code was wrongly relying on isWidgetType() returning true
for destroyed QWidgets; amend it as needed.
[ChangeLog][QtCore][QObject] Using qobject_cast on partially constructed
or destroyed QWidget/QWindow instances now yields correct results.
Similarly, using the convenience isWidgetType() / isWindowType()
functions now correctly return false on such instances. Before,
qobject_cast (and the convenience functions) would erroneously report
that a given object was a QWidget (resp. QWindow) even during that
object's construction (before QObject's constructor had completed) or
destruction (after QWidget's (resp. QWindow's) destructors had been
completed). This was semantically wrong and inconsistent with other ways
of gathering runtime type information regarding such an object (e.g.
dynamic_cast, obj->metaObject()->className() and so on).
Pick-to: 6.3
Change-Id: Ic45a887951755a9d1a3b838590f1e9f2c4ae6e92
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We were clipping the source rect to the image, both pre and post
scrolling, but did not apply the same logic to the target position.
By computing the target position based on the already clipped source
rect we ensure that the target position is also correct.
This was causing valgrind warnings on Linux, and crashes on Windows,
when trying to test the lower level QBackingStore::scroll() function.
The reason we were not seeing this in practice was that QWidget does
its own sanitation and clipping of the arguments before passing them
on.
As a drive-by, fix the access of image to use constBits instead of a
manual cast, and rename variables to better reflect their use.
Pick-to: 6.3 6.2 5.15
Change-Id: Ibc190c2ef825e634956758f612a018f642f4202b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
After 556511f9f3, which moved the resolve
mask storage into the palette's d-pointer, modifying the resolve mask
requires a detach. As of now, we only detached when setting a different
brush, but always modified the resolve mask, which broke palettes that
shared the d-pointer (likely the global default palette).
However, detaching has negative side effects when styles set brushes on
temporary palette objects and then use that palette object's cache key
to build a cache of pixmaps. As each drawing would detach the palette
(even if the palette doesn't change, which is likely), the cache key
changes with each detach, and the cache would quickly increase in size.
This was addressed in changes d7bcdc3a44
and 1e75dcf251.
We can either detach and find other ways to address the issues from
QTBUG-65475, or we can not change the resolve mask when the brush doesn't
change and completely ignore the call.
Since QFont ignores the setting of any attribute to a value that is
identical to the current value, and since it's possible to force that
the resolve-bit is set by calling setBrush twice with different brushes,
ignoring the call seems like the better solution.
[ChangeLog][QtGui][QPalette] Setting a brush on a palette that is
identical to the current brush no longer sets the resolve mask bit for
that particular role, so items using the palette will continue to
inherit changes from parent items.
Fixes: QTBUG-98762
Task-number: QTBUG-65475
Pick-to: 6.2
Change-Id: Ife0f934b6a066858408ef75b7bb7ab61193ceb47
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QWidget will call close() in its destructor, which we might end up
in if a user deletes the widget in the closeEvent.
Pick-to: 6.2
Change-Id: I39684aec0ca130033dad60f2bbf823364a5edcec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Volker Hilsheimer
Ivan Solovev
JiDe Zhang
Morten Sørvig
Sona Kurazyan
Tang Haixiang
Jan Arve Sæther
Laszlo Papp
Lucie Gérard
Marc Mutz
Fabian Kosmale
Liang Qi
CI Insignificant Platforms Monitor Bot
Oliver Wolff
Andreas Buhr
Thiago Macieira
Alexey Edelev
Joerg Bornemann
Tor Arne Vestbø
Shawn Rutledge
Giuseppe D'Angelo
Alexandru Croitor