Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A Q_GADGET class can be used both as a value class and a pointer, but
right now QMetaType::IsGadget is only set for value types. This change
introduces PointerToGadget metatype flag which is set for pointers.
This allow for better handling of gadgets in code as well as
disambiguating between value types and pointers to value types.
Change-Id: Id3bd9e18a8eec7ca1cc6b1c25ed03cdc8c0a75a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since the macro is now just a wrapper for std::is_enum,
its use is also deprecated.
[ChangeLog][QtCore][Global] Q_IS_ENUM is deprecated.
Use std::is_enum<>::value instead.
Change-Id: I09b9f4559c02c81f338cace927873318f2acafde
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apparently, the CI can run something over 1000x slower than on my
machine. We're getting over 100 ms delays in operations that shouldn't
have taken more than half a millisecond. The last report was of 136%
over budget, so I multiplied the resolution by 4.
Change-Id: I9093948278414644a416fffd1474406967b2a6ee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
violate a principal design rule of <chrono>, namely that non-
narrowing conversions are implicit, but narrowing conversions
need duration_cast. By accepting any duration, we allow non-
sensical code such as
QTimer::singleShot(10us, ...)
to compile, which is misleading, since it's actually a zero-
timeout timer.
Overloading a non-template with a template also has adverse
effects: it breaks qOverload().
Fix by replacing the function templates with functions that
just take std::chrono::milliseconds. This way, benign code
such as
QTimer::singleShot(10s, ...)
QTimer::singleShot(10min, ...)
QTimer::singleShot(1h, ...)
work as expected, but attempts to use sub-millisecond
resolution fails to compile / needs an explicit user-
provided duration_cast.
To allow future extension to more precise timers, forcibly
inline the functions, so they don't partake in the ABI of the
class and we can later support sub-millisecond resolution by
simply taking micro- or nano- instead of milliseconds.
Change-Id: I12c9a98bdabefcd8ec18a9eb09f87ad908d889de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using _MIN for signed values, and _MAX for unsigned values, we may
detect conversion issues when serializing QVariants using QSettings.
Change-Id: I3ce58ba4b93f791f75c7ae44d1fd5030f07b2f25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix is trivial, but the patch adds a new QSettings tests that iterates most
of the QMetaTypes and verifies that storing and retrieving them again gives the
same value. This is a more complete test than the testVariantTypes tests, which
is limited to a subset of the QVariant types. The new tests borrows logic from
the QMetaType test machinery.
QSettings has been Q_ENUM'ified in the process, for improved debug output.
Note that on backends such as the INI backend, the metatype of the QVariant read
from the settings will be a string, so it won't match the input QVariant type,
but the result of converting that to the original value type should still work.
Task-number: QTBUG-56124
Change-Id: Ib03a26abf77c9fb449b94160d28bc4baeb095f25
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A check "just in case" -- we don't want leaks nor crashes
due to double deletions, and so on.
Change-Id: I24f1a486f0d438595bbe352ab780b07c5d53acbd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes very little sense that one needs to have a debug build
of Qt to debug QObject issues in application code. At this date
we don't even offer debug builds for Linux systems, and anyhow
one might want to debug an application running against a
release build of Qt.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree are now fully functional even in a non-debug
build of Qt.
Change-Id: Ifddd3023ffc82f3dc3928a7a94d4970e2fb1b44a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These tests use helpers, which are not supported on UIKit platforms.
Change-Id: I51447754dba2cd2547be05c3767e4ff3b6b5a671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's like QElapsedTimer, but marks a time in the future instead.
[ChangeLog][QtCore] Added QDeadlineTimer, a counterpart to
QElapsedTimer, used to mark a time point in the future (a deadline) and
determine whether such a deadline has passed.
Change-Id: Ifea6e497f11a461db432ffff144921f7fbc1d1d3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As it were, QStringLists were not handled explicitly when comparing
QVariants. If both QStringLists contained only a single entry, they
were treated as QStrings - if both QStringLists were empty, there were
equal (correctly so) - but if one of the QStringLists had more than
one entry, the compare function fell through to returning always 1.
As discussed here: https://stackoverflow.com/a/38492467/3444217
Added rich comparison tests for all non-numerical, non-recursive
QVariants that support them (except QModelIndex and
QPersistentModelIndex)
Task-number: QTBUG-54893
Change-Id: Icc5480d9ba056ee5efe83da566c5829caa1509d7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
One of the good features of the new connection style is that
implicit conversion is performed for the connection arguments.
However, this is also a bad feature when it comes to the old
C remnants in the C++ language: for instance, doubles implicitly
convert to ints, possibly losing precision (and GCC/Clang do not
even warn about those under -Wall, only MSVC does) or even
triggering undefined behavior.
For this reason, when using braced initialization, C++11
disables narrowing conversions or floating/integral conversions.
Use this feature when checking the arguments of a PMF-style
signal/slot connection. Technically this makes the program
ill-formed, however GCC still accepts it (but at least
warns under -Wall).
Hence, add a way to disable these implicit conversions.
This is a opt-in and guarded by a macro, as it's a source
incompatible change.
[ChangeLog][QtCore][QObject] The
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT macro has been added.
When using the new connection syntax (PMF-based) this macro
makes it illegal to narrow the arguments carried by the signal,
and/or to perform floating point to integral implicit
conversions on them. When the macro is defined,
depending on your compiler a QObject::connect() statement
triggering such conversions will now fail to compile.
Change-Id: Ie17eb3e66ce0cd780138e60d8bb7da815a4ada83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In all other forms of disconnecting this is done. We also know the
signal index, so there is no reason not to do this.
Change-Id: Ic8b042cd8f45dbff74b42ee30c384a84bef78b20
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QTimer] Added support for std::chrono duration
objects for QTimer methods, like QTimer::singleShot and
QTimer::setInterval.
Change-Id: I87e17314d8b24ae983b1fffd14536e24d5b12424
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's really a kernel functionality, as it implements really low-level
functionality and it's used by the event dispatcher. It was in tools/
only because QTime is.
QDeadlineTimer is also coming to kernel/.
Change-Id: Ifea6e497f11a461db432ffff14491c6d9b839eb0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...if a PMF connection had already happened. Since UniqueConnection
isn't implemented for non-PMFs (functors and lambdas aren't comparable,
even if static member functions or non-member functions are), we pass a
null pointer for comparison argument. The disconnect() code already
protected against a null pointer there, but not the connect code path
with Qt::UniqueConnection
Change-Id: I87e17314d8b24ae983b1fffd145324beced0494d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
The stream in question is from prior to Qt 5.0 release, before
commit 718a2251be changed QDateTime
serialization format to store Qt::TimeSpec instead of the private
flag. The last byte was 0xff meaning LocalUnknown, but 0xff is
not valid in Qt 5.0.
It was just garbage that Qt up to now just accepted. With the upcoming
short QDateTime optimization, the results are worse.
Change-Id: I25d85d86649448d5b2b3fffd1450f57df17e7794
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QVariant::canConvert<Enum> was returning true for everything can can be converted
to integer, but not for integer itself. That's because in QVariant::canConvert
we set the targetType to Int of it's an enum, but the Int->Int case was not
on the conversion matrix. So this commits adds it to the conversion matrix
and now QVariant::canConvert<Enum> returns consistently true for int itself.
But even tough canConvert returned true, it did not actualy do any conversion
to the enum type itself. Fix that by handling the case properlt in 'convert'
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert and conversion from
integer types to enumeration types.
Task-number: QTBUG-53384
Change-Id: I6ac066f3900e31bfcea7af77836ddfc7730bd60b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The behavior was different in the variadic template code and in the C++98
code. The code without variadic template support was not copying the functor
object (e.g. a lambda) before calling it.
However, in the variadic template section, QtPrivate::FunctorCall::call
took the functor by value instead of by reference resulting in a copy.
QtPrivate::FunctorCall::call is a helper function for
QtPrivate::FunctionPointer::call which is only needed for variadic template
expension.
[ChangeLog][QtCore][QObject] If the compiler supports variadic templates,
no longer copy functor connected to a signal each time the signal is
emitted. Restoring the C++98 behavior.
Task-number: QTBUG-52542
Change-Id: I3ca20ef6910893b8a288e70af7de4c7b69502173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The flags here are passed to a private QVariant constructor, and they
really represent a boolean - IsPointer or not.
Because the flag for the key_type was incorrectly populated with the
flag for the value_type, memory would be corrupted when using a mapping
type whose value_type is a pointer, but whose key type was not, such as
QMap<QString, int*>
This typo has been there since the concept was introduced in commit
v5.2.0-alpha1~807 (Add container access functionality for associative
containers in QVariant., 2013-04-05).
Task-number: QTBUG-52246
Change-Id: I9ecb13c603015eed2dc2ca43947fa0ecd6be8b5a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
People use this, so make sure there's a test for it.
I don't expect this test to fail, but static and
dynamic checkers should be presented with this
use-case, so they have a chance of warning, because
certain implementation strategies of QPointer may
make this code undefined.
Change-Id: I334bd73204ba4e186c4098fc6b7188917407e020
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is analogous to QObject::inherits() but only requires the
metaobjects rather than pointers to a QObject instances. This is needed
for type checking on the backend of Qt 3D where we do not have access
to QObject pointers.
Change-Id: I14d26c4cbb5cc3fbecb57725f2c14ee0ffda4a11
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
As found by GCC 6:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1476:9: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation]
tn += ">";
^~
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:1474:5: note: ...this ‘if’ clause, but it is not
if (tn.endsWith('>'))
^~
Fix += argument from char[2] to char as a drive-by.
Change-Id: I814dc58830934cac7fcf81eb7fd7564b2abeb631
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Some entries were not updated and tests failed to succeed on platforms
which need to deploy content/testdata.
Change-Id: Ieb2b44c375b04cbaaecc1fb2303cc2478b86a100
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
testdata needs to be deployed to temp and current directory
needs to be set to that directory for the test to succeed.
Change-Id: I2dd023af9073d90afbb4ad60fcfb50bb1af4e159
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
WinRT does not allow do connect to the localhost due to security
constraints and sandboxing. Hence we need to disable those
currently.
Change-Id: Idb8c71397a41e5fa5bad9d618dba1bb389e71b9c
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This patch makes sure that all events posted using Qt on top of the
GLib event loop have the loopLevel counter incremented.
This is done since Qt depends on the fact that all deleteLater() calls
are issued within the scope of some signal handler (in other words,
triggered by the chain sendEvent() -> notifyInternal2()).
There is a side effect though: in the conditions affected by this
patch, that is deleteLater()s issued within a glib event handler for
example, manually calling processEvents() or sendPostedEvents() with
or without the QEvent::DeferredDelete flag has the same effect, and
deferred deleted events are always processed.
While this is not a currently working feature which the patch breaks,
this side effect seems to be difficult to avoid without separating
sendPostedEvents() and processEvents() into a public and a private
method, in order to detect when they are manually called.
Such change could perhaps be done for Qt6.
An autotest for QTBUG-36434 is also included.
Autotesting for QTBUG-32859 seems to be more challenging in this
respect, due to its dependency on GLib.
Task-number: QTBUG-18434
Task-number: QTBUG-32859
Task-number: QTBUG-36434
Change-Id: Ib89175aa27c9e38bca68ae254d182b2cd21cf7e9
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Not just fuzzily equal. The fuzzy comparison fails for infinities, since
the expression p1 - p2 where p1 = p2 = infinity is NaN. And NaN
comparisons are always false.
As a nice side-effect, we don't do the more expensive computation of a
multiplication if the two numbers really are equal.
Task-number: QTBUG-50036
Change-Id: I11f559ef75544c50b3f8ffff1420cec7c7273295
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If CountedStruct is passed a GetSenderObject object,
it will attempt to call a member on it from within
its own destructor.
That works usually quite well, but in this test case,
which tests for function object leaks when a connection
is torn down because the sender object is destroyed,
the destruction of the CountedStruct happens when all
connections are severed in ~QObject. At that point,
what used to be a GetSenderObject instance no longer
is one and the call into one of its member functions
invokes undefined behavior.
Fix by making QObject::sender() public by a using
declaration instead of a wrapper function.
Found by UBSan:
tests/auto/corelib/kernel/qobject/tst_qobject.cpp:6007:104: runtime error: member call on address 0x7ffc6e7538b0 which does not point to an object of type 'GetSenderObject'
0x7ffc6e7538b0: note: object is of type 'QObject'
Change-Id: Ia973140037b3c1b5a670a8a3949d09b956f40349
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If QObjectPrivate::declarativeData is set, it is
in various places in Qt expected to point to a
QAbstractDeclarativeDataImpl, from which ownedByQml1
is unconditionally read.
In noDeclarativeParentChangedOnDestruction(), the
declarativeData pointer is, however, set to a local
QAbstractDeclarativeData instance, which, being an
empty class, has size 1 and alignment 1.
Depending on the compiler's idea of bit field order,
this code either read uninitialized data from the
dummy object, or else some random stack memory outside
any (valid) object.
What caught UBSan's attention, though, was the
difference in alignment between the two classes:
src/corelib/kernel/qobject.cpp:917:9: runtime error: member access within misaligned address 0x7fffc9cf706f for type 'struct QAbstractDeclarativeDataImpl', which requires 4 byte alignment
Fix by providing a properly initialized object of the
correct type.
Change-Id: Iae83a949ee5a7bc98df13e35ea614c063085fa13
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Don't pass around meta-type IDs in QMetaType::Type
variables. It leads to reading values from an enum
variable that are invalid.
Fix by passing the IDs around as int.
Found by UBSan:
tests/auto/corelib/kernel/qmetatype/tst_qmetatype.cpp:408:5: runtime error: load of value 4028, which is not a valid value for type 'Type'
Change-Id: Idd106ee3d7960fe3d8fefc0fc5830fc22d38a513
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Also use this for converting doubles with QVariant. We generally want
exact results there, rather than adding rounding errors whenever we
convert.
[ChangeLog][QtCore][QLocale] Added special value for double conversion
precision to get shortest accurate representation.
Change-Id: I905b8a103f39adf31d24b6ce2c8a283cf271b597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ieffb429efdc14aa5932b3fcdef5a18e13a62d35f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If QTimer::singleShot() is used with a functor callback and a context
object with different thread affinity than the caller, a crash can
occur. If the context object's thread is scheduled before
connecting to QCoreApplication::aboutToQuit(), the timer has a change
to fire and QSingleShotTimer::timerEvent() will delete the
QSingleShotTimer object making the this pointer used in the
connection invalid. This can occur relatively often if an interval
of 0 is used.
Making the moveToThread() call the last thing in the constructor
ensures that the constructor gets to run to completion before the
timer has a chance to fire.
Task-number: QTBUG-48700
Change-Id: Iab73d02933635821b8d1ca1ff3d53e92eca85834
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QMetaProperty] write() now resets the property if an
empty QVariant is given, or set a default constructed object if the
property is not resettable
Change-Id: I9f9b57114e740f03ec4db6f223c1e8280a3d5209
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
if t >= QMetaType::User, we would not return false nor call convert.
We would then pass a pointer to whatever is in the QVariant to the
qt_metacall that is expecting a pointer to an object of a different type.
Since we have custom converters, we can call QVarent::convert even for
custom types anyway.
[ChangeLog][QtCore] Fixed crash when setting a QVariant of a different
type to a property of a custom type. Attempt to do a conversion instead.
Task-number: QTBUG-40644
Change-Id: Ib6fbd7e7ddcf25c5ee247ea04177e079f6d7de35
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If QT_NO_LIBRARY isn't set we cannot test QCoreApplication's library
path functions and none of the plugin and library related tests are
applicable. Also, examples that rely on dynamic plugin loading for
their core functionality obviously don't work.
Change-Id: I2d381ee1bc8d944e1181557895a7e92a364fd778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test assumed that an event loop can be tested for emptiness
multiple times, which is wrong because an event can be delivered any
time.
Change-Id: Ic44245321eeed2091b640ada2c83d205b83a1cc2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
To handle network events, QEventDispatcherWin32 uses I/O model
based on notifications through the window message queue. Having
successfully posted notification of a particular event to an
application window, no further messages for that network event
will be posted to the application window until the application
makes the function call that implicitly re-enables notification
of that network event. With these semantics, an application need
not read all available data in response to an FD_READ message:
a single recv in response to each FD_READ message is appropriate.
If an application issues multiple recv calls in response to a
single FD_READ, it can receive multiple FD_READ messages
(including spurious).
To solve this issue, this patch always disables the notifier
after getting a notification, and re-enables it only when the
message queue is empty.
Task-number: QTBUG-46552
Change-Id: I05df67032911cd1f5927fa7912f7864bfbf8711e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Disable input and cursor for QGuiApplication instances used in
autotest to initialize it properly.
Change-Id: I78dc9b776269c082c20f244a51f858289129275d
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Tests from corelib/tools were omitted in this change.
Change-Id: I4c8786d33fcf429d11b2b624c7cd89c28cadb518
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Long-lived threads started by Qt itself can now receive events even if
QCoreApplication hasn't been created. This is required in all threads we
start that will handle events, unless we're sure that the thread will
exit before the global application object begins destruction.
Otherwise, those threads will have race conditions dealing with the
event delivery system trying to call the QCoreApplication::notify()
virtual while the object is being destroyed.
Change-Id: I27eaacb532114dd188c4ffff13d4ad2a4bb443e6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On Windows, t->timeout was updated only once, at creation time, so the
timer would always show as "overdue" after the first activation.
The timer is updated to indicate the full remaining time during the slot
activation, which is the behavior of the Unix and Glib dispatchers.
Task-number: QTBUG-46940
Change-Id: I255870833a024a36adf6ffff13ecadb021c4358c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Connection can be copied, one copy could be used for
disconnecting, but the other's d_ptr wouldn't get updated and would
continue to report as still connected.
This patch fixes that by making it check the internal state. That is
only done after d_ptr is already known to be non-null. Unfortunately,
that is the common path:
if (connect(sender, &Sender::signal, [] {}))
will call an out-of-line function. I don't see a way out.
Task-number: QTBUG-46213
Change-Id: I66a35ce5f88941f29aa6ffff13dfb45dca68a350
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Global (application-level) event filters are supposed to be run only in
the main thread, so ensure that it is the case.
Change-Id: I27eaacb532114dd188c4ffff13d5a17d991b8bd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This allows for example properties with QMap<Foo, Bar>
[ChangeLog][QtCore] Types in the Q_PROPERTY macro can now contain commas
(for example, QMap<Foo, Bar>)
Change-Id: Ibf5c8c9cf20a7c8b3dfec9e891fb8a9ca1bdba7c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not try to automatically register the meta type for Q_GADGET that
are not default constructible.
This fixes a source incompatibility in the function pointer syntax
of QObject::connect when such types are used as an argument of a signal.
Task-number: QTBUG-45721
Change-Id: I3065f6d57bc1f37e16988d2dee99118de250ca56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise the type is registered with the wrong name
Change-Id: I68ec3a05e2528816626e648b46ccc9d70b004866
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
My commit 6c973dee2c broke the case where setApplicationName
is called before the QCoreApplication constructor.
Fixed and added autotest.
Task-number: QTBUG-45283
Change-Id: If7bdb0d82be50b50a95a04027f5f9d7143c1a7ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QObject::connect tries to determine if the arguments are registered
metatypes. This used to work even for arguments that were forward
declared. But now, the metatype system tries to call
QtPrivate::IsQEnumHelper<T>::Value to know if it is registered.
That fails on gcc if T is forward declared.
Apparently gcc needs to know the full type of T to pass it in the
ellipsis function, even within a sizeof expression.
So change the ellipsis expression to a template one.
Task-number: QTBUG-44496
Change-Id: I7fa07bd3cde470b134c2ec53b0d581333d16a6f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The QSkip was there because of a bug in QList.
Since commit 8153386397, the test is
no longer using QList. We can remove the QSKIP
Task-number: QTBUG-8959
Change-Id: Icc18d341d734d0605dcddaf925586f3bd603d6a0
Reviewed-by: Jocelyn Turcotte (Woboq GmbH) <jturcotte@woboq.com>
Use qmath and cmath methods instead of math.h methods.
Change-Id: I86ee2465c999822bf00a7cefee1642c4c30590a6
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
It was already a user meta-type, so it only gets
promoted to internal.
[ChangeLog][QtCore] QPersistentModel index becomes an built-in
meta-type, including QVariant support.
Change-Id: I63d733d1eb66aa61691e7afce27fe7372a83ac00
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calling applicationName() in the destructor of a global static (e.g.
via QLockFile) was working when calling setApplicationName explicitly
but otherwise it would suddenly return an empty string.
This led to inconsistencies, the application name switching from
non-empty to empty at saving-on-destruction time.
There was already a global static, used when setting the app name
explicitly before construction. Use it now to store the app name
in all cases (explicitly set, or fallback).
Change-Id: I71d3a0c40158f8bfd022c385b198346a2594b1cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, values that are composed of others are not handled
correctly. For example,
Qt::Dialog|Qt::FramelessWindowHint (Qt::Dialog=0x2|Qt::Window)
is currently output as
"Window|FramelessWindowHint" since
Qt::Window matches first and its bits are removed from the flag value
so that Qt::Dialog in the next iteration no longer matches.
Change-Id: I67db5c977c75f887392aa8f345c5e6e9d82c5c26
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On platforms which does not have at all sysv support, all
posix ipc tests and compilation failed because sysv
specific header files were included unconditionally.
Change-Id: I5713ace6daeb6e79f8794ce42b2b3dfa1b95ab2d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The problem is that the operator<< was taking a non-const reference to the QDebug
object. This causes a problem as all other operator<< return a temporary.
Since every other roperator<< takes the QDebug by value, we should also take it by value
in this case.
Move the operator<< in qdebug.h because i don't want to #include qdebug.h from qobject.h
And move the qt_QMetaEnum_debugOperator to be in the corresponding .cpp
Task-number: QTBUG-44462
Change-Id: Ia01629224c58930c2997e767efc43de90d6309e2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Adds conversion from QJsonArray and QJsonObject, and report missing
conversion failures for other QJsonValues.
Change-Id: Ic0c3a952657912401db877b068f7fcc3c08c94c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: If43dcc2b77fea5ae3ec40cc847467fc21fbd2c83
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
So if you stream enum type into qDebug, it will show the name
of the enum value instead of the int
Change-Id: Iec5e826623353560319890d3e7c4ab97d0645f4a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Check by comparing __argc/__argv whether a modified argv was
passed to QCoreApplication. If that is the case, build
QCoreApplication::arguments() from that argv instead of using
the command line.
[ChangeLog][Important Behavior Changes][QCoreApplication]
On Windows, QCoreApplication::arguments() now returns a list built
from argv on Windows as well if a modified argv was passed to the
class' constructor.
Task-number: QTBUG-30330
Task-number: QTSOLBUG-184
Change-Id: I2498bb554130e7bfaeada3aebe786dfdd0eb534d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is like value(), but returns an iterator instead of the value().
[ChangeLog][QtCore][QAssociativeIterable] Added find().
Change-Id: I029fc8f91cef78f718d419587a2a50ffd2bf7632
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
In replacement for Q_ENUMS and Q_FLAGS.
Q_ENUM(Foo) has to be put after the declaration of Foo in an object.
It will tell moc to include the enum in the meta object (just like
Q_ENUMS) and will allow templated code to get the metaobject for
that enum.
Will be used by QDebug and QMetaType
Change-Id: Iefaf8ae07dc0359828102bf384809346629b3e23
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This avoids having to define operator< for types where operator== is
required but operator< doesn't make any sense (e.g. QGeoCoordinate).
Change-Id: I81f6a9d8fc0009a4514c974b5e02b446c50d1e31
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Commit 96995db4af implements the necessary bits for this to work
under QNX.
Change-Id: Ie9e2f421f4f27fcaf40697dd363e9ed047754f0d
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This patch is a forward-port from 4.8 branch
(d869e1ad4b0007757e97046609de2097cd9e9c5d).
Change-Id: I6ae36a5417d1176fbecf775668f6033b1cb22a94
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Bundle test data in qrc on Android. Extract it, as the tests
expect to find it in the file system.
Change-Id: I251eca3c23141a608b1cbac5ee0b7164c068f9b4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We can not assume that the property type is always registered, because
QVariant argument may contain an instance of a different type.
Change-Id: I4fc9593b826e13c401dbdacec4d60db36edc7102
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Previously, QVariant would try to convert one operand to the other's
type, which would produce unexpected results: the results would depend
in the order of the operands and whether there was data loss in the
conversion. In addition, ordering comparisons were only done with signed
values, yielding other unexpected results, like
QVariant(LLONG_MAX / 2) < QVariant(Q_UINT64_C(0)).
Instead, try to obey the C++ standard rules for type promotion in
expressions. Our code is a little simpler than the standard would seem
to require since we know some more details from the ABI.
[ChangeLog][Important Behavior Changes][QVariant] QVariant now obeys the
C++ type promotion rules when comparing numeric types (integrals, float
and double), including the fact that unsigned comparisons are preferred
for types of the same rank (that is, now QVariant(-1) > QVariant(0U)).
Task-number: QTBUG-42722
Change-Id: Ie7b19073dcb45485354710975e561bcdb1a753f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The testcase always returns the expected result, independently of the
QEventLoop::ExcludeSocketNotifiers flag to processEvents.
In Qt4 the same test uses an intermediate QEventLoop and already runs
it before the QEventLoop::ExcludeSocketNotifiers:
QEventLoop loop;
// allow the TCP/IP stack time to loopback the data,
// so our socket is ready to read
QTimer::singleShot(200, &loop, SLOT(quit()));
loop.exec(QEventLoop::ExcludeSocketNotifiers);
This fixes and improves the test by connecting, processing and
checking the bytesWritten signal for the pending connection socket.
Change-Id: I1b1d2b7b83910c87ba3fe48e29ac9fd585ac62ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This would result in (a == b) != (b == a). The == operation should be
commutative as much as possible.
Now, there's still an asymmetry in that b is forced to a type and the
conversion may fail. QVariant should have an idea of what conversions
are "promotion" and which ones are "demotion" (subject to loss of data
and/or can fail), so it can do the promotion first
Task-number: QTBUG-42254
Change-Id: I9fa4496bbbf0f8719ff8456cc24247290beac608
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This now guarantees that doing a round-trip from an FP number to string
and back to number results in the same number. This change is required
because DBL_DIG and FLT_DIG don't have the meaning that we were
expecting them to, here: they mean the minimum number of digits of
precision in decimal (i.e., changing the last decimal will always cause
the FP number to change). We need the maximum number: there is one
change in the last decimal place that causes the FP number to change.
IEEE 754 single-precision has 24 binary digits and double precision has
53 binary digits in their mantissa. To convert that to decimal, multiply
by the number of decimal digits a binary digit represents (log2(10) =
0.3), then add one for the rounding and one more digit for the actual
precision we want. That is, for floats we now ask for 9 digits and for
double, 17 decimal digits.
Task-number: QTBUG-42574
Change-Id: Ic78beb60a218f75322f832d33d63fd84e7a65b65
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This is required so we can take a QVariant and detect that it contains a
Q_GADGET and then use method like QMetaType::metaObject and QMetaProperty::write
with the QVariant::data
Change-Id: I3603692e4e84426e10bf59949e3def3ea4947bec
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
gcc 4.9 has the __has_include feature which enables the
TEST_FORWARD_LIST and includes the forward_list header. This in turn
checks that the c++11 flags are enabled, or throws an error.
Change-Id: I44aa58e47c2f9ba6f14cb5a68d24da4a76698e5f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fix warning:
QEventLoop: Cannot be used without QApplication
and occasional crashes on Windows.
Task-number: QTBUG-26406
Change-Id: Ia8b2a4e3d375d1e43f0e66fe64a39af5f9cf4d60
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Dario Freddi <dario.freddi@ispirata.com>
QMetaType::type(const char *) requires that the string argument is
0-terminated. This new overload makes it possible to query the type
of a string with an explicit length.
In particular, QByteArrays constructed by QByteArray::fromRawData(),
for example from a substring of a normalized method signature (the
"int" part of "mySlot(int"), can now be queried without making a copy
of the string.
Also, Qt5 meta-objects represent type names as QByteArray literals,
which can be fed directly to this new QMetaType::type() overload (no
need to call strlen).
Change-Id: I60d35aa6bdc0f77e0997f98b0e30e12fd3d5e100
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Methods can be invoked with QMetaMethod::invokeOnGadget
Change-Id: Id734868bb530b02587daf0f62bce01798ade2ac2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Benign, but easy to avoid by using automatic storage.
Change-Id: I60a1a2e85d8c1b2d91f3f33973374afae8876340
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Benign, but easy to avoid by distinguishing between
owning and non-owning smart pointers.
Change-Id: Idcd7ae550a8e4e00dfcd5570790e2ed985e2379a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Makes the test execute faster (not that it's slow in any way)
and more importantly gets rid of the QGuiApplication-induced
3rd-party library leaks reported by asan and/or valgrind.
Change-Id: I94b505f15b4db577a2807b0b81464e19ce7e7cab
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
If the types doesn't match in QVariant::compare we do a comparison based
on QString, this may end up indicating a full match, though the we don't
match according to cmp. In this case it would be better if we preserved
the non-matching to avoid breaking ordering.
[ChangeLog][QtCore][QVariant] Fixed ordered comparison between QVariants
that do not match but produce identical toString output.
Task-number: QTBUG-40363
Change-Id: I84a8eca11e8875dba9948bde2906ae7c5aa35704
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As a side effects it also adds core templates types to the tests
Change-Id: I0e3338e0bffdf21982aa83d404c83288e54411f4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
Fix disconnection from pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
Commit 9cc106d9d7 fixed connect, so apply
the same fix in disconnect
[ChangeLog][QtCore][QObject] Fixed disconnecting from pointer to member
signal that belongs in the base class but whose type is explicitly given
as a pointer to a member in the derived class
Task-number: QTBUG-40638
Change-Id: Ia546fc8f36e1ea0dd0645bdd820aea47f43677ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qtbase contains four identical implementations of next power of two,
these should be shared and the implementation made available to other
qt modules, as it is also used many places outside of qtbase.
[ChangeLog][QtCore][QtMath] Introduced qNextPowerOfTwo methods.
Change-Id: Id23fbe5ad6bae647b30d5a4212c0330e48a50278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This brings QTimer::singleShot on par with QObject::connect in
terms of the new Qt5 syntax. With this patch, it is now possible
to connect singleShot to a member pointer, a static function
pointer and a functor (with or without a context object).
The short code path for 0 msec is not yet implemented - it will
require further modifications to QMetaObject before it will be.
An additional SFINAE on the new singleShot overloads had to be
implemented to prevent tricking the compiler into believing
const char * might be a function pointer.
[ChangeLog][QtCore][QTimer] Implemented new style connect syntax,
including functors, in QTimer::singleShot
Task-number: QTBUG-26406
Change-Id: I31b2fa2c8369648030ec80b12e3ae10b92eb28b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
IteratorOwner pointer specialization was failing for void* because of
an invalid function overload.
Change-Id: I80355ddd2b871c1fa2fa5bf5a4ed8bc7768fc3c9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Patch 9a08483d76 introduced a regression,
tst_qmetatype test was not meant to be removed.
Change-Id: I5456ffbbd9d9f8e461f828c6183e46dabf67952b
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The macro should stringify value of the given token not the token
itself.
Task-number: QTBUG-37547
Change-Id: I90f4fa613bd13d5a581828ab13f620b40dfd3593
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test instantiates enormous amounts of templates in one compilation
unit. All clang versions, that I tested, suffers from performance issues
while compiling the test, the cost depends on the version. The most
affected are shipped by Apple.
Task-number: QTBUG-37237
Change-Id: I0959c1a4a6faee448ae1dae5c1e70ee06cefbd9c
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We do not need to check all possible basic type combinations in
the autoregistration test.
Change-Id: Ibfb97a93d9d1862e669d843988976690bbc83c74
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Redundant and unused variadic macro arguments were removed. For macros
with known count of arguments, named arguments are preferred.
Common code was moved out from macros so it is not generated over and
over.
Change-Id: Ib5106555d0d3c6cadfbdbdbd614831240b6d762f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
And takes a very long time to build if it doesn't run out of memory.
Task-number: QTBUG-37237
Change-Id: I8c7fae4d2d99ad59c6d6306da2df554a05955446
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
So far we did bind the definition of Q_COMPILER_VARIADIC_MACROS to
C++11 (so gcc, clang will not define it in default gnu++98 standard).
However, variadic macros are a feature of the gcc preprocessor since
version 2.97, and are enabled in the default configurations on gcc, clang,
icc.
This might cause warnings and errors though if one enables additional
warnings in gcc, clang (e.g. by -pedantic). Anyhow, as a precedent
qglobal.h already relies on 'long long' ... The warning can be disabled
by adding '-Wno-variadic-macros'.
[ChangeLog][Compiler Specific Changes] Variadic macros are now enabled
more liberally for gcc, clang, icc. If you have warnings (because you e.g.
compile with -pedantic), disable them by -Wno-variadic-macros.
Change-Id: Ie979b85809508ad70cab75e6981f20496429f463
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Ulf Hermann
Daniel Vrátil
Marc Mutz
Liang Qi
Thiago Macieira
Friedemann Kleint
Glen Mabey
Allan Sandfeld Jensen
Jake Petroules
Edward Welbourne
Kai Koehne
Tor Arne Vestbø
Giuseppe D'Angelo
Lars Knoll
Jędrzej Nowacki
Clemens Sielaff
Mike Krus
Olivier Goffart
Liang Qi
Stephen Kelly
Friedemann Kleint
Eirik Aavitsland
Sean Harmer
Maurice Kalinowski
Paolo Angelelli
Louai Al-Khanji
Jani Heikkinen
Simon Hausmann
Ulf Hermann
Juha Turunen
Alex Trotsenko
Pasi Petäjäjärvi
Oswald Buddenhagen
David Faure
Marko Kangas
Robert Griebl
Tor Arne Vestbø
Allan Sandfeld Jensen
Gabriel de Dietrich
Allan Sandfeld Jensen
Frederik Gladhorn
Alex Blasche
Rafael Roquetto
Tobias Koenig
Eskil Abrahamsen Blomfeldt
Jan-Marek Glogowski
Jørgen Lind
Kent Hansen
Jędrzej Nowacki
Matti Paaso
Lars Knoll
Frederik Gladhorn
Friedemann Kleint
Mitch Curtis
Stephen Kelly
Dario Freddi
Keith Gardner
Sergio Ahumada
Kai Koehne
Oliver Wolff
Thomas McGuire