This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On NTFS, a junction point can be created and deleted by the mklink and
rmdir commands, respectively. If a directory is not identified
correctly as a junction, then applications will likely try to remove
it using recursive methods, leading to fatal data loss.
With this change, Qt can identify file system entries as junctions,
allowing applications to use the correct file system operation to
remove it.
The test needs to delay the cleaning up of junctions and files it
creates until the checks are complete; since they might fail and make
the test function return prematurely, use a scope guard.
[ChangeLog][QtCore][QFileInfo] Add QFileInfo::isJunction so that
applications can recognize NTFS file system entries as junctions
Task-number: QTBUG-75869
Change-Id: I3c208245afbd9fb7555515fb776ff63b133ca858
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the feature to corelib so that the QMetaType enumeration
values can be properly excluded and there is no need for a
dummy class.
Use QT_REQUIRE_CONFIG in the headers of classes to be disabled.
Add headers/source files in the .pro file depending on the configure
feature in libraries and tests.
Add the necessary exclusions and use QT_CONFIG.
Task-number: QTBUG-76493
Change-Id: I02499ebee1a3d6d9a1e5afd02517beed5f4536b7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
stat() and friends expect a null-terminated C string. There is no way to
generate anything useful from a string that has null bytes in the
middle. It's important to catch this early, as otherwise, for example, a
QDir::exists() on such a path can return true, as the path is silently
truncated.
Extend the checks for empty file names to windows and add checks for null
bytes.
Change-Id: Ie9794c3a7c4fd57f9a66bdbbab8b45a08b6f9170
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a RAII class for registry keys and use it throughout
the code base.
Change-Id: I666b2fbb790f83436443101d6bc1e3c0525e78df
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Always try to create the runtime directory and never change
the permissions of an existing directory. Conform to the
XDG Base Directory Specification:
"If, when attempting to write a file, the destination directory
is non-existent an attempt should be made to create it with
permission 0700. If the destination directory exists already
the permissions should not be changed."
Fixes: QTBUG-68338
Change-Id: Iaf854d69225fc46e43abae86232d749e5c247df0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Is't been deprecated since Mac OS X 10.5.
Task-number: QTBUG-74872
Change-Id: I8b1ad7aca6448883cb164fd0c4b329592ca60548
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
If the domain passed down is an actual TLD that's the subject of a *
rule, e.g. "ck" subject to *.ck, then we were finding no dot in it and
concluding that it couldn't be the subject of a * rule.
Added a test for the specific .ck case and commented on where we could
get some canonical test data that I tripped over while researching
this. Cross-reference the cookie-jar test from the QUrl test, too.
Fixes: QTBUG-78097
Change-Id: Id858a9dae22e6b306a68df3fc199e0160f537159
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The API is problematic for several reasons:
- the mixing of flags and enum in a single enum type
- the name "type" as somewhat overloaded
- the ease of misuse when comparing the result rather than testing
for a bit being set
In light of this, focus for 5.14 on the new isShortcut and
isSymbolicLink functions, thus migitating the problematic
isSymLink which conflates the two concepts.
Change-Id: I57e02321edd5061f69a775f04a0932ef89adf866
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Qt has traditionally considered Windows shortcut files equivalent to
symlinks on Unix file systems. Because of NTFS symlinks, the
interpretation of shotcut files as symlinks is confusing.
In this change, QFileInfo treats shortcut (.lnk) files as regular files
but can follow the pointed object.
In addition, QFileInfo introduces a more comprehensive file type. So
that applications can make well-informed decisions about how to treat a
file system entry.
Based on the implementation of QFileInfo::type(), two inline helper
functions are introduced to QFileInfo.
1. isSymbolicLink, returns true if it points to a symbolic link.
2. isShortcut, returns true if it points to a shortcut.
[ChangeLog][QtCore][QFileInfo] Introduce QFileInfo::type() to replace
the isSymLink method.
Task-number: QTBUG-75869
Change-Id: Icc0dd52f9ad0ea50b0265d77ee0d0a3d25054e39
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
With a few special cases to make the tests pass.
Biggest one is the qlockfile_test_helper.
Also a few tests have some problems and have not been
ported yet: qfileselector, qresourceengine, qprocess.
Change-Id: I91a5210b13e7a0697774d909449a71f46af0a0ba
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Only qdir, qlockfile, qprocess and qresourceengine were manually
disabled, otherwise all other builds fine on linux.
Change-Id: I09fd0ffffb778057d6bf9c25cad1fcd73fb7e530
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Applications might receive paths with Windows' '\\?\' markers, which
indicates a long path to Win32 APIs, when the application is opened by
explorer via file association. Qt not ignoring those markers will fail
to open such files.
By stripping the marker in QDir::fromNativeSeparators, QFile, QFileInfo
etc automatically are able to handle such paths. QDir::cleanPath is
also documented to normalize separators, so it needs to be done there
as well.
[ChangeLog][QtCore][QDir] Remove Windows specific long path markers
when handling file paths with native separators.
Change-Id: I526a890614edee8c85b39fc12c98e7ddb6e0d793
Fixes: QTBUG-75117
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Current codebases assume isCompressed() implies ZlibCompression, since
there was no compressionAlgorithm() getter. In order to force codebases
to change, deprecate isCompressed() and force handling of the algorithm.
The replacement API is being introduced in 5.14, which is why the
warning is being emitted in 5.15 only.
Change-Id: Ief874765cd7b43798de3fffd15a9f5d978951ea5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Replaced the usages of deprecated APIs by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Change-Id: Ic38245015377fc0c8127eb5458c184ffd4b450f1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The call to QFileDevice::unsetError() in QSaveFile::open() does
not clear QSaveFilePrivate::writeError. Clear it in addition.
Fixes: QTBUG-77007
Change-Id: I5e5009750f1726d1c74c1b4eb1c33f3a5393fe4f
Reviewed-by: David Faure <david.faure@kdab.com>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced QOperatingSystemVersion::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::macVersion(),
QSysInfo::MacintoshVersion with QOperatingSystemVersion::current().
- Added QOperatingSystemVersion::WindowsVista for convenience, as it
is used in lots of places.
Change-Id: If9c4ac496005b2e70b5c70be160747afa74b98c1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is sufficient to run this test on systems where we don't need to
set up dependencies and satisfy other assumptions the test makes. It is
safe to assume that if this test passes on regular Unix, then
QTemporaryFile will behave as expected on Android as well.
Change-Id: Iaf9a67d7c12b3acfd0992bab591c3f906b073d9e
Fixes: QTBUG-73564
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ie89641601763ff41eee5356a4b5ddee7ef810fbc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Such files do not exist (as per QFileInfo::exists), but on some
platforms that rely on realpath(), QFileInfo::canonicalFilePath did
not return the empty string.
Use the same logic on macOS as we already did on Android, and include
a test case. Remove the unnecessary dynamic memory allocation and
use a stack-allocated array instead, unless we use modern POSIX in
which case realpath() will alloc the memory for the result for us.
Change-Id: Ide987c68ebf00cbb7b1a66c2e9245a12c7807128
Fixes: QTBUG-44242
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The code contained a sizeable chunk of string parsing along with
qDebug()s in the normal path of execution. That code, however, was
only used for Qt's own autotests.
The idea of this patch is, then, to not only move the autotest case
into the cold text section (using Q_UNLIKELY), but also to completely
exclude it, when QT_BUILD_INTERNAL is not set.
Unfortunately, the structure of the function did not really lend
itself to #ifdefing that part of the code out (production code was in
the middle of non-production code), so I transformed the engine
selection code into a lambda, replacing assignment with returns, and
swapping the branches of the central if around to yield a single block
of code that can be excluded from compilation with just one #ifdef.
As a consequence, the runtime code is almost unaffected, and the
function is much easier to read now.
Since the test-specific code is only compiled into Qt now in developer
builds, guard the tests that rely on this behavior with the same macro.
Change-Id: I9fd1c57020a13cef4cd1b1674ed2d3ab9424d7cd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The file system appears to cache too aggressively, so if the reported
storage size doesn't change after flushing to disk, ignore the failure.
Change-Id: Iba7dce79591447fac296bfe92c2dc993d36d0c2a
Fixes: QTBUG-69868
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Without this change, the target of a symbolic link that points to a UNC
share would include UNC in the target path, and not be correctly made
absolute.
Add a relevant test case, and use the opportunity to factor out the
helper code that creates NTFS symlinks into a function that takes
care of error handling.
The file created with the new test case only gets cleaned up correctly
when passing the file path into QDir::rmdir, which is either way the
right thing to do.
[ChangeLog][QtCore][QFileInfo] Fixed resolving of symbolic links to UNC
shares on NTFS file systems.
Change-Id: I9ba75d627aedf7c4cc289f0cb71088d795d30d8a
Fixes: QTBUG-73688
Task-number: QTBUG-63970
Task-number: QTBUG-30401
Task-number: QTBUG-20791
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test changes the current directory to the test directory
in fromUserInputWithCwd(), but did not restore it, causing:
Totals 898 passed, 0 failed, 1 skipped, 0 blacklisted, 368ms
********* Finished testing of tst_QUrl *********
QTemporaryDir Unable to remove "C:\\TEMP\\tst_qurl-ryVxqu" most likely due to the presence of read-only files.
Restore the old directory at the end to fix this.
Change-Id: I62669868f3c6d97dd38ebac76515428c14b7e1e7
Reviewed-by: David Faure <david.faure@kdab.com>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A QCOMPARE(..., true) isn't much use; and failure would have set the
object's .errorString(), which seems like it'd be worth reporting, so
use QVERIFY2() instead.
Change-Id: I2f3f9379984694891de81d2ffebc696d91eec70f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Fix qmake build
- Fix QtNetwork moc-ing, by including the moc files
inside the cpp files
- Fix sql odbc plugin by including QT_PLUGIN define
- Fix Boostrap to link against the Platform target, to get the
correct Unicode and WIN64 defines.
- Fix vulkan headers to be found
- Fix freetype bzip and png unresolved symbols / linker issues
when building minimal platform plugin (also need to make
sure to use the vcpkg toolchain instead of CMAKE_PREFIX_PATH
because then find_package is overridden, which does magic
to properly propagate static library dependencies).
- Fix qfilesystementry test not to be built without private
tests feature (it led to undefined symbols issues).
- Make sure to remove QT_NO_CAST_TO_ASCII define when building
QtCore, so that the qstringbuilder3 test builds
successfully.
Task-number: QTBUG-74140
Change-Id: I353d08392b604d55f8e62cdd8696d1e19a3c084a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Needed to disable QT_NO_UNSHARABLE_CONTAINERS, as this
triggers asserts.
QMetaType also has some Qt 6 specific code disabled to
get things to compile.
Fix various details in autotests to accommodate for
the changes with Qt 6.
Add a workaround for black lists on macos, where
QSysInfo::productType() now returns 'macos' and not
'osx' anymore.
Change-Id: Ie26afb12a2aac36521472715934a7e34639ea4d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Iterate over a struct array rather than having a list of strings to
pull things out of, by individual index; this makes it easy to include
the non-existence check for directories in the same loop. In the
process, give the absolute-path tests a prefix to mirror the relative-
prefix on their partners. This prepares the way for adding more
test-cases.
Change-Id: Id839caedf92387dfa9b94f31253410285f72ff70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use setPath() instead, as advised in the deprecation warning.
Change-Id: I2f22220885938808c8efb85720ad10f7e05801ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Regular update in preparation for 5.13, adding tests for additions
since 5.9.4/5.10.1/5.11.0's update 7e946030 (the last to record its
upstream version sha1). Corrected the license header: it's now
published under MPL 2.0 (not 1.1); and our secondary licensing of it
is as LGPL3. Deferred full header over-haul until we've worked one
out in detail.
[ChangeLog][Third-Party Code] Updated DNS public suffix list
Task-number: QTBUG-72623
Change-Id: Iabdbbbfd79624830396c2a6fe0a73389bd6ce5b7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QUrlQuery] QUrlQuery now provides an
initializer list constructor. It can be created using a list of
key/value pairs.
Fixes: QTBUG-68645
Change-Id: Ief5939aa477718f6dd3580f2c60f95ff3aa892ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix clang-tidy warnings:
- Use range-based for and streamline some code
- Use nullptr
Change-Id: Iad43490d0e968baa76d54d3bf81558a48b19cdbd
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the creation of the symbolic link/junction from the _data() slot
into the actual test function. The parameters are passed by a newly
introduced struct. This ensures only the symbolic links/junctions that
are actually needed are created. It can then no longer happen that
filtering for one data row invokes recursive deletion of the mountpoint
junction.
Also use of the newly introduced convenience createSymbolicLink()
in canonicalFilePath()
Task-number: QTBUG-63989
Change-Id: Ia78fd4ad6097136934ab5a375f4c352713d0f115
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
the test uses CoreFoundation api directly, so it must link it
explicitly.
amends 6c8f32388b.
Change-Id: I76b7d8ab41d6a66138eb45bd0f067cfee8e96cb8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The match method still uses QRegExp. This patch updates the code to use
QRegularExpression and translates the wildcard patterns to a suitable
form for QRegularExpression.
[ChangeLog][Core][QDir] QDir now uses QRegularExpression internally for
wildcard matching. Note that QRegularExpression might not give the
exact same result as QRegExp as its implementation follows strictly the
glob patterns definition for wildcard expressions. Nevertheless, the
tests for QDir return the same results as before.
Change-Id: I095959443ac7362f7534e35454eff038061fca82
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
qt_nameprep() already reset the string to its original length to
indicate failure, but we didn't handle that in qt_ACE_do(). So make it
have a return value whcih makes it easier to handle that case and do
handle it.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused URLs whose hostnames
contained unassigned or prohibited Unicode codepoints to report
isValid() = true, despite clearing the hostname.
Change-Id: I41e7b3bced5944239f41fffd1545b7274c4b419d
Reviewed-by: David Faure <david.faure@kdab.com>
Adds an enumName to QMetaEnum to carry the name of the enum since for
flags that doesn't match the name of the Qt type, but is needed if the
flag is scoped.
Change-Id: I1c0f77eb9e40e6fd1eb6a59bea77caf0f33fcf43
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no such file, if one of the "directory" components of its
path is not, in fact, a directory. Added a test for non-existent file
(specified to give empty canonical file path) as well as a test for a
file in a sub-directory of a known file. The former incidentally
tests for QTBUG-29402, fixed long ago.
Change-Id: I60b80acc0f99f0a88cdb1c4d191af7384f3a31c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use one QStringLiteral instead of repeating a QLatin1String(), that
was passed to a function that has to convert it to unicode; do the
conversion at compile-time.
Reducing i % 256 is fatuous when i ranges from 1 to 100.
A QFile will close() itself on destruction, no need to do it explicitly.
Especially when *not* close()ing the *other* QFile that was left open.
Change-Id: Idb39312d9c9beaf082b7cead574bc6bb9bb3a775
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Unix, we wouldn't even *try* to truncate if the file was open for
appending. The combination may be an eccentric choice but - at least
when it's combined with reading - I can imagine use-cases for it; and
we should (at least try to) deliver what we're asked for, even if we
can't think why anyone would want it. So actually enable truncation
when asked to.
Amended some tests to check this works and corrected the QIODevice
documentation of mode flags (which misdescribed the special case that
implies Truncate). Removed special-case code, to apply truncate when
writing but not reading, since it's been made redundant by the
pre-processing of mode done in QFSFileEngine::processOpenModeFlags().
[ChangeLog][QtCore][QFile] When opening a file, if Truncate is asked
for, or implied by other flags, it shall be attempted, regardless of
what other options are selected. We previously did this on Windows;
now we do so also on Unix (even when appending).
Task-number: QTBUG-13470
Change-Id: I1e08d02cfbae102725fccbbc3aab5c7bf8830687
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For keys, QSettings escapes all characters outside of [-a-zA-Z0-9_.]
by using percent encoding, and changes '/' to '\'. That is,
settings.setValue("qt.*", true)
will be written to an .ini file as
qt.%2A=true
This means that QSettings can not be used to write general-purpose
qtlogging.ini files. Fix this by applying the reverse transformation
method from QSettings when reading in the .ini file.
[ChangeLog][Logging] Qt will now accept qtlogging.ini files
written by QSettings.
Task-number: QTBUG-69548
Change-Id: I55b7a8b433291268dc6855901f72b1c04f8ee6d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When we have the named keys and not just integer values, we can output
something unambiously that closer match how the enums should be used.
Output of enums without proper metadata is left unchanged
Before:
QSurfaceFormat::ColorSpace(DefaultColorSpace)
QPainter::CompositionMode(3)
After:
QSurfaceFormat::DefaultColorSpace
QPainter::CompositionMode(3)
Change-Id: I537e879ba8b5c555b2aae9ba831facc88d430443
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The code I introduced in 4ee7425794 only
dealt with systems that reasonably used a 64-bit off_t parameter. Turns
out that we don't turn on largefile support on 32-bit Android, which
meant that the fix caused a regression.
[ChangeLog][QtCore][QFile] Fixed a regression that caused QFile::map()
to succeed or produce incorrect results when trying to map a file at an
offset beyond 4 GB on 32-bit Android systems and on some special Linux
configurations.
Task-number: QTBUG-69148
Change-Id: I2c133120577fa12a32d444488bac3e341966f8d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Turned it into a data-driven test, with the old start-of-time as one
row, in order to add a regression test for an alleged MS API bug in
Windows XP.
Task-number: QTBUG-12006
Change-Id: I632ecc854f50f4183a990c8a27826ede9bd20e55
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To avoid (even more) duplicated code, "qt_test_helper" ensures the
policy of putting a test's helper application next to the test's
own executable.
The helper executable is suffixed with "_helper" to avoid name
clashes with its folder.
Change-Id: Ic50cb1daa257e7ffc75440c10a3b90fd39424683
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Using QFileSystemEntry::isAbsolute() broke handling of resource paths.
Extended QDir::absoluteFilePath() tests to cover absolute resource path
and some UNC variants also resolved in the same fix.
Amend existing filePath tests to use drives where needed.
Task-number: QTBUG-68337
Change-Id: I4f02cf67828ad93e562857118f8442037f18bab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change only adds them to the registry and reserves the IDs. The
next commit will handle conversions.
Change-Id: I56b444f9d6274221a3b7fffd150d2d49f40940c2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The existence of the helper application confuses Coin which will
result in an error.
Change-Id: I3edf3f27acbe133b180d41a8ae950991e9a5b5da
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I55078563304959c41e0dd9bb7bb91a6fc51e005a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
A change between 5.11 and dev has modified the position of testqrc
inside the resource list. Adapt accordingly.
Change-Id: I697103f4b8c9e93bb613e814c47a4e68e9a997ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... by adding a prefix to the resource.
On android there is a resource ("qpdf") which gets included in the root
in all applications, included from "src/gui/painting/painting.pri".
So we move the test data to a sub-folder.
Task-number: QTBUG-68596
Change-Id: I67f2ed79a32c68d9a76cafba8ef23fe0da7c0fe8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoids an unused function warning.
Change-Id: Id221595920e9a34eb83b66fe123d664f60fcae05
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It happens because our filesystemwatcher thinks it is subdirectory and not
two different paths
Task-number: QTBUG-60676
Change-Id: Ic753e9481cb26303a030044e0a5ab4d703bc529f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
tst_QProcess hangs sometimes in QEMU. Based on my experiments in a debug VM the
offending test seems to be processesInMultipleThreads(), since that was were I
was able to reproduce the hanging in.
Since the whole test executable hangs, blacklisting is not enough, so skip the
test.
Task-number: QTBUG-67760
Change-Id: I34f8852be955a8612deac22b369f68d79a139d11
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The test relies on the existence of qt-project.org in resources. It
contains mimetype data and is automatically added. For static builds on
MSVC it is only added if it is actually needed though.
Change-Id: Icd1d74466607196f9b635205f7cb4d9b300ec4b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If builtin_testdata is present additional data ends in inside of
resources so that tests can access this data when needed. The addiitonal
data has to be taken into account in the resource engine's test.
Change-Id: I10de6b9612ca49b314d77cfadd5b2360a5d90d53
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I399cc1aed3ee4151cf6adfd8f8780d8975604d52
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
RCC generates code that registers resources automatically on program
startup via global constructors. When linking statically and nothing
references the symbols in the .o file compiled from the RCC generated
code, then the linker will discard the embedded resources and they will
not get initialized. That is why for static linking it is necessary to
explicitly initialize resources using the Q_INIT_RESOURCE macro.
We can avoid the need for the explicit initialization in the context of
plugins that are statically linked into the application. resources.prf
can generate a .cpp file with a helper function that contains all the
Q_INIT_RESOURCE calls for all resources in the plugin. That helper
function in turn is injected into the plugin entry point, which in turn
is guaranteed to be included in the final binary.
Change-Id: If1abf9c85ef92935020af073b989c58c1ae6ca63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
That check is flaky on Windows. It doesn't seem to be testing Qt functionality.
I also don't see CreateFile2() documentation mentioning any guarantees that
opening the same file twice would give the same HANDLE each time.
Change-Id: Ica2e60571ae9fc39bf822803a2a9dd6add8323d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The drive has to be defined for every Windows configuration (also
including winrt).
Change-Id: I94a3131b8aec20cda97dc78f55b1d87aa10240e4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Matches glibc commit 9a0cc8c1bd7645bf3c988890ffb59639c07a5812.
[ChangeLog][QtCore][QUrl] Fixed a bug in parsing IPv6 addresses with
more than 4 hex digits in a component.
[ChangeLog][QtNetwork][QHostAddress] Fixed a bug in parsing IPv6
addresses with more than 4 hex digits in a component.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9a0cc8c1bd7645bf3c988890ffb59639c07a5812
Change-Id: I2701038131d91eb108aebb3bec16278e4efe3de2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QDir::isAbsolutePath(name) thinks any path starting with a slash is
absolute; however, to return a valid absolute path, we need to put a
drive prefix onto such a name. So use QFileSystemEntry::isAbsolute()
for that check (it believes in the need for a drive, or UNC prefix)
and handle the absolute-but-for-drive case when it arises.
Add a regression test and make related changes to existing tests.
Task-number: QTBUG-50839
Change-Id: Id5d2b2586bb1423fa2d9375a298a4bb5241cffe0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The printVolumes function already adds line endings.
Change-Id: Id2553f881ccc0ab3c8b8fc77d3096dd5d968abda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the current working directory, which doesn't necessarily match
the location of the settings file.
Change-Id: Idffe2e87190cc9b6027fbba3b84e9dbf72ccf2f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix 'unresolved external symbol __imp_Reg*' errors for builds
using Windows ICC.
Change-Id: I99cb6d53c45cadb31b5675182753f168a7bf4ea3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
If more than one VM tries to run the test at the same time, it times out. These
sharing violations were attempted to be worked around in 1c3dc8cfb, but the
workaround just leads to timeout, not success.
Task-number: QTQAINFRA-1727
Task-number: QTBUG-66216
Change-Id: If8bfd60dbb6575843680971d45b1c82e5beff534
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
This is in preparation to adding CBOR support. We don't need yet another
dir for CBOR and placing it in src/corelib/json is just wrong.
Change-Id: I9741f017961b410c910dfffd14ffb9d870340fa6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Windows, QFileInfo.isWritable() was returning true in situations
where the file would only be writable with elevated privileges. Using
AccessCheck instead of GetEffectiveRightsFromAcl to get the correct
results.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Task-number: QTBUG-30148
Change-Id: I7a3468ac069bf782ca312078e3a84107b6cd468c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: I1861e5366ea980dff2ffa753b137276c77278eee
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The assertion in isUnnamedFile() we had was incorrect after the file was
removed, since we cleared the name and possibly reset back to the
template. Since ~QTemporaryFile() calls remove(), this was easy to
trigger if you attempted to remove the temp file and leave
QTemporaryFile like that.
Take this opportunity to add to the docs of setAutoRemove() explaining
the possibility of unnamed files.
#7 0x00007f69bcc2b50e in qt_assert (
assertion=assertion@entry=0x7f69bcf194a0 "unnamedFile == d_func()->fileEntry.isEmpty()",
file=file@entry=0x7f69bcf19458 "io/qtemporaryfile.cpp",
line=line@entry=514) at global/qglobal.cpp:3123
#8 0x00007f69bcd672cf in QTemporaryFileEngine::isUnnamedFile (this=this@entry=0x55cd60644df0)
at io/qtemporaryfile.cpp:514
#9 0x00007f69bcd683f7 in QTemporaryFileEngine::remove (this=0x55cd60644df0)
at io/qtemporaryfile.cpp:396
#10 0x00007f69bcd48654 in QFile::remove (this=this@entry=0x7fffb393f7e0)
at io/qfile.cpp:513
#11 0x00007f69bcd6653b in QTemporaryFile::~QTemporaryFile (this=0x7fffb393f7e0, __in_chrg=<optimized out>)
at io/qtemporaryfile.cpp:719
Change-Id: I57a1bd6e0c194530b732fffd14f4ed28ca8185b2
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to make sure that the PID we read is from the same boot
as we are right now running. The collision could happen on embedded
systems where the boot sequence is fixed, so all the same processes
would have the exact same PIDs after reboot as they did before.
[ChangeLog][QtCore][QLockFile] QLockFile can now properly conclude that
a lock file from a previous boot of the same device is stale and can be
removed. This is implemented only for Linux and Apple operating systems.
Task-number: QTBUG-63425
Change-Id: I0b48fc8e90304e0dacc3fffd14e8e3a197211788
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
To obtain "proper" directory behavior, we have to check against the
extracted "resources" directory instead of its qrc counterpart.
Change-Id: I4996ba74419945f78d356ad953a5b826ff663687
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Friedemann Kleint
Leander Beernaert
Qt Forward Merge Bot
Allan Sandfeld Jensen
Alexandru Croitor
Ryan Chu
Ulf Hermann
Simon Hausmann
Samuli Piippo
Tor Arne Vestbø
Edward Welbourne
Sona Kurazyan
Volker Hilsheimer
Daniel Smith
Jędrzej Nowacki
Lars Knoll
Marc Mutz
Thiago Macieira
Liang Qi
Samuel Gaist
Joerg Bornemann
Tobias Hunger
Jan Arve Sæther
Kai Koehne
Christian Ehrlicher
Joni Poikelin
Sami Nurmenniemi
Timur Pocheptsov
Oswald Buddenhagen
Robbert Proost
Oliver Wolff
Mårten Nordheim
Mikhail Svetkin
Kari Oikarinen
Alexander Shevchenko
Otto Ryynänen
d3fault
Dyami Caliri
Tony Sarajärvi