‘t’
Specifies that the argument is a ‘ptrdiff_t’.
This modifier was introduced in ISO C99.
We use qsizetype, which is the same width as ptrdiff_t, so it makes no
difference in va_arg().
Change-Id: Iea47e0f8fc8b40378df7fffd16255730109413a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since 5.3 joining() and old Joining type
Replaced by JoiningType joiningType()
Change-Id: Iefee50aaf94cec6d67b5fc004b3e68357b2015c5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During review of a refactor (coming shortly), Thiago wondered what the
magic numbers were. On closer examination, I concluded that they were
wrong and wrote some tests to prove it. This commit adds those tests;
replaces the misguided old code with something that passes them; and
documents the reasons for the various parts of its decisions.
In the process, tidy up QLocaleData::doubleToString() somewhat and
rename some of its variables to conform to Qt coding style.
Change-Id: Ibee43659b1bdb0707639cdb444cfe941c31d409f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The issue has been introduced when refactoring QByteArray::count
implementation (see 631127126c).
Because the last argument of QByteArrayMatcher::indexIn() method
has a defult value, it has been compiling without issues, but was being
called with incorrect size parameter. Fixed it to pass the length of the
input data correctly.
Change-Id: Ic9c2f33733131ec17276aa889f2d7ea40ec79b01
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Created a QByteArrayView in symmetry with QStringView.
Added the basic tests symmetrical to QStringView tests.
Moved the implementations of non-modifying methods of QByteArray to
namespace QtPrivate, to be reused inline from both QByteArray and
QByteArrayView. Changed QByteArray's counterparts of those methods to
take QByteArrayView as argument instead of QByteArray. Removed
QByteArray's operator QNoImplicitBoolCast(), because it was causing
ambiguity when calling those methods with QByteArray argument (it was
there to perevnt if(!ba)/if(ba) from compiling, but currently that would
be ambiguous and won't compile anyway).
[ChangeLog][QtCore][QByteArrayView] New class.
Task-number: QTBUG-84321
Change-Id: I05f92e654cf65c95f2bb31b9c9018746ac110426
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Created tst_QByteArrayApiSymmetry test for the common APIs of
QByteArray and QByteArrayView. Moved the tests for startsWith(),
endsWith(), indexOf(), lastIndexOf(), compare(), from tst_QByteArray
to tst_QByteArrayApiSymmetry and adapted them to check different
QByteArray/QByteArrayView combinations. Added tests for first(),
last(), sliced(), chopped(), chop(), truncate(), count(), contains()
(test inputs are taken from corresponding tst_QStringApiSymmetry
tests).
Task-number: QTBUG-84321
Change-Id: I4e712b1692e3c1271d51ddcda6c9eb8bb01e11d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
After API discussions, agreement was that from(n) is a bad name
for the method. Let's go with sliced(n) instead.
Change-Id: I0338cc150148a5008c3ee72bd8fda96fb93e9c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also adjust qCalculateBlockSize() to be able to handle large
allocations.
QVector::length() is currently still limited to 2G items, that will
get changed in a later commit.
Change-Id: I3a92fbfd7f281d30844c5fafa3b9a474bc347c19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the last places where those got used and avoid
allocations when we resize to 0.
Change-Id: Ib553f4e7ce7cc24c31da15a55a86d18bdf1cc5c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a side effect, data() can now return a nullptr. This
has the potential to cause crashes in existig code. To work
around this, return an empty string from QString::data()
and QByteArray::data() for now.
For Qt 6 (and once all our internal issues are fixed), data()
will by default return a nullptr for a null QString, but we'll
offer a #define to enable backwards compatible behavior.
Change-Id: I4f66d97ff1dce3eb99a239f1eab9106fa9b1741a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The functional style interface is nice, but does feel alien in some
contexts, so better also have explicit encode and decode methods.
Change-Id: Ic07ced15f65cdb3a7f1cf044041e341d2ef87f79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
[ChangeLog][QtCore][QByteArray] Remove method overloads taking
QString as argument, all of which were equivalent to passing the
toUtf8() of the string instead.
Change-Id: I9251733a9b3711153b2faddbbc907672a7cba190
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add overloads for qMin and friends where the arguments are of different
type, but one can be easily promoted to the other. Return the promoted
type. Promotions are only allowed if both types are either signed,
unsigned or floating point numbers.
This should simplify writing code in many case (as for example
qMin(myint64, 1)) and also help reduce source incompatibilities between
Qt 5 and Qt 6, where the return types for sizes of our containers changes
from int to qsizetype.
Change-Id: Ia6bcf16bef0469ea568063e7c32f532da610d1cd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the overload-with-template trick from P1423 to avoid ambiguities
when existing callers pass 0 or nullptr.
Add a qdoc-ignored macro to hide the fact that the overload is a
template.
[ChangeLog][QtCore][QString] Added char8_t overload of fromUtf8().
Change-Id: Iaa2d365bfa161ef36cc73fa3bad50aabf34d01db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Assume UTF-8 on all Unix like systems
* Export some functions to be able to compile QTextCodec once
moved to Qt5Compat.
Task-number: QTBUG-75665
Change-Id: I52ec47a848bc0ba72e9c7689668b1bcc5d736c29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The recently-added slice() method has the problem that it's a noun
as well as a verb in the imperative. Like std::vector::empty, which
is both an adjective and a verb in the imperative, this may cause
confusion as to what the function does. Using the passive voice form
of slice(), sliced(), removes the confusion. While it can be read as
an adjective, too, that doesn't change the meaning compared to the
verb form.
Change-Id: If0aa01acb6cf5dd5eafa8226e3ea7f7a0c9da4f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add QStringView overloads where they were missing. This keeps things
almost 100% source compatible.
Task-number: QTBUG-84319
Change-Id: Ica8ee773b2ce655e9597097786117959e34b236e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QString and QStringRef did bounds checking for left/right/mid, whereas
QStringView was asserting on out of bounds.
Relax the behavior for QStringView and do bounds checking on pos/n
as well. This removes a source of potentially hidden errors when porting
from QStringRef (or QString) to QStringView.
Unfortunately, one difference remains, where QByteArray::left/right()
behaves differently (and somewhat more sane) than QString and
QStringRef. We're keeping the difference here, as it has been around
for many years.
Mark left/right/mid as obsolete and to be replaced with the new
first/last/slice methods.
Change-Id: I18c203799ba78c928a4610a6038089f27696c22e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These methods are scheduled as a replacement for left/right/mid()
in Qt 6 with a consistent, narrow contract that does not allow
out of bounds indices, and therefore does permit faster
implementations.
Change-Id: Iabf22e8d4f3fef3c5e69a17f103e6cddebe420b1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously only qstr*icmp() were tested and the test data was sent via
QString and {en,de}coding. Use a local data-type to package pointers
to actual string literals for passing to these functions that take
them. Fold the various tests involving null pointers and empty
strings into the general testing, removing from "singularity" tests,
and combine the remainders of those tests into a single test of
singular cases for QByteArray::ompare. Move all these tests to
alongside the existing tests for QByteArray::compare. Use nullptr
rather than 0 as the null string.
Change-Id: Ie6d01e839c330c2f960af4bcc95e5633539337d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Including other headers, while defining very questionable macro
names, can and will result in trouble. Stop doing that.
While at it, move from including <QtTest> to include-what-you-use,
and clean up the code a bit.
Change-Id: Idb02ef2b612c0805baecac3ce6edd435609aca4c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously it handled Latin-1, which made it incompatible with UTF-8,
which is now our preferred 8-bit encoding. For Qt6 it is limited to
ASCII. Adjusted tests to match. QLatin1String::compare() turned out
to be relying on qstrnicmp()'s Latin-1 handling.
Removed some spurious Q_UNLIKELY()s and tidied up code a little in the
process.
[ChangeLog][QtCore][Important Behavior Changes] Encoding-dependent
features of QByteArrray are now limited to ASCII, where previously
they worked for the whole of Latin-1. This affects case-insensitive
comparison, notably including qstricmp() and qstrnicmp(), and
case-transforming functions.
Fixes: QTBUG-84323
Change-Id: I2925d9908f8654599195a2860847b17083911b41
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This class is designed as C++20-style generator / lazy sequence, and
the new return value of QString{,View}::tokenize().
It thus is more similar to a hand-coded loop around indexOf() than
QString::split(), which returns a container (the filling of which
allocates memory).
The template arguments of QStringTokenizer intricately depend on the
arguments with which it is constructed, so QStringTokenizer cannot be used
directly without C++17 CTAD. To work around this issue, add a factory
function, qTokenize().
LATER:
- ~Optimize QLatin1String needles (avoid repeated L1->UTF16 conversion)~
(out of scope for QStringTokenizer, should be solved in the respective
indexOf())
- Keep per-instantiation state:
* Boyer-Moore table
[ChangeLog][QtCore][QStringTokenizer] New class.
[ChangeLog][QtCore][qTokenize] New function.
Change-Id: I7a7a02e9175cdd3887778f29f2f91933329be759
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since QString::split() is not going away in Qt 6, we should aim
to provide API symmetry here, and ease porting existing code from
QString(Ref) to use QStringView.
This is easier than having to port everything to use tokenize() at
the same time. tokenize() will however lead to better performance
and thus should be preferred.
Change-Id: I1eb43300a90167c6e9389ab56f416f2bf7edf506
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The idea is pretty simple -- add QRegularExpression matching over
QStringView. When matching over a QString, keep the string
alive (by taking a copy), and set the view onto that string.
Otherwise, just use the view provided by the user (who is then
responsible for ensuring the data stays valid while matching).
Do just minor refactorings to support this use case in a cleaner
fashion.
In QRegularExpressionMatch drop the QStringRef-returning methods, as
they cannot work any more -- in the general case there won't be a
QString to build a QStringRef from.
[ChangeLog][QtCore][QRegularExpression] All the APIs dealing
with QStringRef have been ported to QStringView, following
QStringRef deprecation in Qt 6.0.
Change-Id: Ic367991d9583cc108c045e4387c9b7288c8f1ffd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make the API more symmetric with regards to both QString and QStringRef.
Change-Id: Ia67c53ba708f6c33874d1a127de8e2857ad9b5b8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make the API more symmetric with regards to both QString and QStringRef.
Having this available helps making QStringView more of a drop-in
replacement for QStringRef. QStringRef is planned to get removed in Qt 6.
Change-Id: Ife036c0b55970078f42e1335442ff9ee5f4a2f0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The name CET is locale-dependent; but QLocale doesn't know about
localization of time zone names. Such abbreviated zone names are, in
any case, potentially ambiguous - various zones around the world have
collisions - so they can't be relied on.
QTimeZone's various backends have differing handlings of how to
abbreviate zone names (MS's provides no abbreviated names at all); and
it appears macOS actually follows the relevant localizations.
So it is hopeless to hard-code the expected zone abbreviations.
Changed the tests to consult QTimeZone for the abbreviation and
compare what it gets with the results of checks which should match
this. This is less stringent, but it is at least robustly correct,
thereby getting rid of assorted kludges and #if-ery.
Pick-to: 5.15
Task-number: QTBUG-70149
Change-Id: I0c565de3fd8b5987c8f5a3f785ebd8f6e941e055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
resize() to a smaller size does not reallocate in Qt 5 if the container
is not shared. Match this here.
As a drive-by also fix resize calls on raw data strings to ensure
they are null terminated after the resize.
Change-Id: Ic4d8830e86ed3f247020d7ece3217cebd344ae96
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Even in Qt 5, remove() can be passed an alias to *this. In Qt 6, with
the advent of substring sharing, this will become even more
pronounced. Use the same fix as was already used in QString::insert().
Pick-to: 5.15
Change-Id: I1a0d3d99fd7dff6e727661646d2cbfdc94df2682
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As best as I can guess, this used the QString::operator=(char), which
I locally removed. Before that lands in Qt, remove this ... wtf?
Pick-to: 5.15
Change-Id: Ie083fe69500d6b5b633416f89f5dd1d7068c20b2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Centralize, rather than keeping adding constructors from any
array-like container.
A more robust implementation, likely following the converting
constructor for std::span ([span.cons]), is out of scope for C++17
and will require C++20's ranges and concepts.
[ChangeLog][QtCore][QStringView] QStringView can now be constructed
from any contiguous container, as long as they hold string-like data.
For instance, it's now possible to create a QStringView object
from a std::vector<char16_t>, a QVarLengthArray<ushort> and so on.
Change-Id: I7043eb194f617e98bd1f8af1237777a93a6c5e75
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It has been the case for both QStringLiteral and QByteArrayLiteral
since Qt 5.0, and Q_ARRAY_LITERAL since Qt 6.0.
Since it's definitely surprising, add a note in the docs, which
is "somehow" consistent with the interpretation of capacity as
the biggest possible size before we reallocate. Since it's 0,
any manipulation of the size will cause a reallocation.
(Alternatively: the capacity() is for how many elements memory was
requested from the free store. No memory was allocated, so 0...)
Task-number: QTBUG-84069
Change-Id: I5c7d21a22d1bd8b8d9b71143e33d537ca0224acd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add an operator QVariant() to QRegExp to keep things at source compatible
as possible.
Add a hack to QVariant::load/save() to recognize the old typeid
for QRegExp and stream them correctly as long as the streaming operators
for QRegExp are registered.
Also move the datastream test for QRegExp to tst_qregexp, and adjust it to
the qvariant changes.
Change-Id: I120b38a7541b43ec07a21b17f7f35c55f071eb75
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replacement methods do now exist in QRegExp, or
for QRegularExpression when porting to it.
Remove all autotests associated with the old methods.
Change-Id: I3ff1e0da4b53adb64d5a48a30aecd8b960f5e633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prepares for the removal of those methods from QString and
QStringList. The new methods in QRegExp are left as a porting help.
Change-Id: Ieffa33a79caf53b83029e9b070c4eb5cadca1418
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move pre/and post condition handling out of the main loop
to make that one as fast as possible.
Remove special handling of a corner case when the input length
is zero, where the utf8 decoder did something else than all
other decoders.
Change-Id: I94992767ea15405b38f7953adadaa6ff98b20b6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no real dependency to QTextCodec in those files anymore.
Change-Id: Ifaf19ab554fd108fa26095db4e2bd4a3e9ea427f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Document QStringConverter, QStringDecoder and QStringEncoder.
In addition, do some touches to the API, renaming one enum value,
add a flags argument to one constructor and make some members private.
Change-Id: I8f99dc3d98fb8860cf6fa46301e34b7eb400511b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a replacement for Qt::codecForHtml().
Change-Id: I31f03518fd9c70507cbd210a8bcf405b6a0106b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add method that tries to determine the encoding of the data
from an initial byte order mark.
Change-Id: I348c51a3d4db9b434af53359b739a7e17acfc760
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add static methods that allow converting between a name for an
encoding and the Encoding enum.
Change-Id: I12bc503cf757ea31d3ca8d5e1f1216efddcb16d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a constructor, that allows constructing a string converter by
name. This is required in some cases and also makes it possible to
(in the future) extend the API to 3rd party encodings.
Also add a name() accessor.
Change-Id: I606d6ce9405ee967f76197b803615e27c5b001cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Feed the data one by one to the encoder or decoder to
verify that the handling of incremental decoding is
correct.
Change-Id: I565e4f1872e00859026334f7662b6778772e159d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
IgnoreHeader was a rather badly defined enum, in addition the
utf8 and utf16 codecs where handling BOMs somewhat different
for stateless decoding.
Fix this by introducing explicit flags for writing a bom when
encoding and not skipping the initial bom when decoding.
Source compatibility for QTextCodec is done with a couple of
static constexpr variables.
Change-Id: I0b2d94f84c937cec1e0494c16ef448c00382691d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new QStringEncoder and QStringDecoder classes
(with a common QStringConverter base class) are
there to replace QTextCodec in Qt 6.
It currently uses a trivial wrapper around the utf
encoding functionality.
Added some autotests, mostly copied from the text codec
tests.
Change-Id: Ib6eeee55fba918b9424be244cbda9dfd5096f7eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former messes in bad ways with the overload set (it, fatally,
attracts char16_t, e.g.). The latter was probably added in response to
ambiguities between (char) and (QChar). While it's harmless now,
remove it, since it no longer pulls its weight.
The no-ascii warning is now coming from QChar(char), so the protection
isn't lost.
[ChangeLog][QtCore][QString] The += operators taking char and
QChar::SpecialCharacter have been removed as they cause adding a
char16_t to QString to call the char overload, losing information. The
append() function was not affected.
Change-Id: I57116314bcc71c0d9476159513c0c10048239db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUtf16(ushort*) and fromUcs4(uint*) overloads are going
to be deprecated. Use the newer fromUtf16(char16_t*) and
fromUcs4(char32_t*) overloads.
As a drive-by, use std::end()/std::size() where applicable.
Change-Id: I5a93e38cae4a2e33d49c90d06c5f14f7cb7ce90c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The fromUcs2() named ctor is designed to replace all the non-char
integral-type constructors of QChar which make it very hard to control
the implicit QChar conversions, which have caused a few bugs in Qt
itself. As a classical named contructor, it simply returns QChar.
The fromUcs4() named "ctor", however, needs to expand surrogate pairs,
and thus can't just return QChar. Instead, it returns a small struct
that contains one or two char16_t's, can be iterated over and be
implicitly converted to QStringView. To avoid bikeshedding the name
(FromUcs4Result, of course :), it's defined inline and thus can't be
named outside the function. This function replaces most uses of
QChar::requiresSurrogates() in QtBase.
[ChangeLog][QtCore][QChar] Added fromUcs2(), fromUcs4().
Change-Id: I803708c14001040f75cb599e33c24a3fb8d2579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
wchar_t hasn't been QStringView's storage_type for a very long time
(at least since 5.10). And in Qt 6, we require char16_t support not
only in the compiler, but also in the stdlib, so drop the guards and
the alternative code paths.
Change-Id: I99f28b575f61c16a2497840708beaa4b54a80f57
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They don't work with std::span, since std::span has neither
const_iterator nor cbegin()/cend().
To fix, perfectly forward the return type with decltype(auto) instead
of mentioning T::const_iterator, and rely on the const-qualfication of
the help::c{r,}{begin,end}() functions' arguments to select the
correct T::{r,}{begin,end}() overload.
Change-Id: I4992d4bd521d2dc0f9ea51ae70cde8286ae543a5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It clearly belonged in tst_QDate::toDateTime(), for which it adds a
few more test-case and in which it inspires some further testing.
The new testing of case-insensitivity doesn't work if the format
contains stray non-format characters, so added a new data column to
take care of that.
Pick-to: 5.15
Change-Id: I73619be02091c97024a84cb963c7029e9fd0569a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't rely on a latin1 locale anymore for the test,
and the other code was not doing anything.
Change-Id: I08bc08d200c9e037884d8b680dfbb24c129f3d2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
[ChangeLog][QtCore][QString] Now supports appending, prepending
and inserting QStringViews.
Change-Id: I7538c050c67590f27d91443eda0b94a4b80b62f2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a follow-up to commit ed2b110b6a
to fix indexing errors. Added the test that should have accompanied
that commit, which found some bugs, and refined the Indian number
formatting test (on which it's based).
Make variable i in the loops that insert grouping characters in a
number be consistently a *character* offset - which, when each digit
is a surrogate pair, isn't the same as an index into the
QString. Apply the needed scaling when indexing with it, not when
setting it or decrementing it. Don't assume the separator has the same
width as a digit.
Differences in index no longer give the number of digits between two
points in a string, so actively track how many digits we've seen in a
group when converting a numeric string to the C locale. Partially
cleaned up the code for that in the process (more shall follow when I
sort out digit grouping properly, without special-casing India).
Change-Id: I13d0f24efa26e599dfefb5733e062088fa56d375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
The name of the option may cause confusion due to the fact
that it's not _fully_ anchoring the match, only anchoring it
at the offset passed to match() -- in other words, it's a
"left" anchoring. Deprecate the old name and introduce
a new one that should explain the situation better.
[ChangeLog][QtCore][QRegularExpression] The AnchoredMatchOption
match option has been deprecated in favor of
AnchorAtOffsetMatchOption, which should better describe
that the match is only anchored at the offset.
Change-Id: Ib751e5e488f2d0309a2da6496378247dfa4648de
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
In particular, this changed the US currency formats for negative
amounts to be parenthesised versions of the positive amount forms,
rather than having a minus sign after the $ sign. Test updated.
[ChangeLog][QtCore][QLocale] Currency formats are now based on CLDR's
accounting formats, where they were previously mostly based (more or
less by accident) on standard formats. In particular, this now means
negative currency formats are specified, where available, where they
(mostly) were not previously.
Task-number: QTBUG-79902
Change-Id: Ie0c07515ece8bd518a74a6956bf97ca85e9894eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
We should not implicitly convert a QString to a QLocale object. It can
easily create unwanted side effects.
Change-Id: I7bd9b4a4e4512c0e60176ee4d241d172f00fdc32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The call of _control87 would crash because of the previous test.
Change-Id: I254efe9c2e9892a473a02663e5ff7016791d5d6d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Include WordBreakTest.html, since a test uses sample strings from it,
albeit without actually reading the file.
Had to comment out more of the new tests, as at Revision 24, pending
an update to harfbuzz and the text boundary detection code.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Task-number: QTBUG-82747
Change-Id: I0082294b09d67ffdc6a9b5c15acf77ad3b86f65f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
No surprises, as char16_t is transparently handled by QChar overloads.
Ok, one surprise: we seem to have QChar <> QByteArray relational
operators, but they don't work for char16_t. Probably members of
QChar, so LHS implicit conversions are disabled. Didn't investigate,
because it needs to be fixed at some point anyway, but that point is
not now.
Change-Id: I74e1c9bdd168e6480e18d7d86c1f13412e718a32
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... to not fold QChar tests into QString ones.
This is needed for adding char16_t tests.
Change-Id: I2507d7d68a39ff96cf033eadde10e383dc976dda
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In QByteArray, they were just not marked as such.
In QString and QStringRef, the implicit conversion from QChar to
QString would destroy it. Add a QChar overload, delegating to
QStringView.
Added docs for the new overloads, copying from the nearest neighbor so
as to not look out of place. All string classes use different wording
for these functions. A cleanup of this state of affairs is out of the
scope of this patch.
Change-Id: I0b7b1d037aa229bcaf29b793841a18caf977d66b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is a follow-up to commit 895939c7f9
to fix deprecation warnings it added.
Change-Id: I3d86655ec2c84c1bdcac9c70436075fc78f2f781
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I446f9ddc8f8de4a0b79b09edb44f7c1496fbc33f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extract the character in its proper unicode form and encode it in a
new single_character_data table of locale data. Record each entry as
the range within that table that encodes it. Also added an assertion
in the generator script to check that the digits CLDR gives us are a
contiguous sequence in increasing order, as has been assumed by the
C++ code for some time. Lots of number-formatting code now has to take
account of how wide the digits are.
This leaves nowhere for updateSystemPrivate() to record values read
from sys_locale->query(), so we must always consult that function when
accessing these members of the systemData() object. Various internal
users of these single-character fields need the system-or-CLDR value
rather than the raw CLDR value, so move QLocalePrivate's methods to
supply them down to QLocaleData and ensure they check for system
values, where appropriate first.
This allows us to finally support the Chakma language and script, for
whose number system UTF-16 needs surrogate pairs.
Costs 10.8 kB in added data, much of it due to adding two new locales
that need surrogates to represent digits.
[ChangeLog][QtCore][QLocale] Various QLocale methods that returned
single QChar values now return QString values to accommodate those
locales which need a surrogate pair to represent the (single
character) return value.
Fixes: QTBUG-69324
Fixes: QTBUG-81053
Change-Id: I481722d6f5ee266164f09031679a851dfa6e7839
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUtf32::convertToUnicode() was forgetting to set headerdone when it
dealt with the header (for contrast, Utf16::convertToUnicode() does).
Fixes: QTBUG-62011
Change-Id: Ia254782ce0967a6cf9ce0e81eb06d41521150eed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_QLocale::windowsDefaultLocale(), we configure the long and
short date formats and the short time format eccentrically, then
verify that QLocale::system() does actually get these eccentric
formats. However, we did not configure the long time format (whose
MS-API name doesn't match that of the other formats), so had to rely
on a guess at the system locale's format. That, however, is not
robust; so now configure the long time format, too.
Removed a duplicated test, at the same time.
Fixes: QTBUG-36306
Change-Id: I04dc22c7eb1b58af55412b598873868f79e9c74f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Back-ends need to catch NULL data so as not to call system APIs with
invalid pointers.
[ChangeLog][QtCore][QCollator] Fixed a regression introduced in 5.14.0
that caused QCollator not to operate with default-constructed QStrings
and print a warning on Windows.
Fixes: QTBUG-81673
Change-Id: I2eafe1e188b436afcca3cf2ecdf98bba707c44c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This pulls the CMake port, which not only adds CMake files but also
modifies existing code. A brief summary of "seemingly unrelated" changes:
* configure.json was re-formatted to not use multi-line strings. That
is an extension of the Qt JSON parser but not JSON compliant, which
is needed for the configure.json-to-cmake conversion script (python).
* Some moc inclusions were added due to CMake's slightly different way
of handling moc. With the changes the files build with qmake and cmake.
* Since CMake just grep's for the Q_OBJECT macro to determine whether to
call moc (instead of doing pre-processing like qmake), the existing use
of "Q_OBJECT" in our documentation was changed to \Q_OBJECT, which cmake
doesn't see and which is now a qdoc macro.
* QTestLib's qFindTestData was extended to also search in the source
directory known at build time.
What this change also brings is a new way of building modules in Coin by using
YAML configuration files that describe the steps of building and testing in Coin
specific terms. The platform configuration files in qt5 are instructed to use the
old Coin built-in way of testing ("UseLegacyInstructions" feature) but for any
configurations that do not have this, these yaml files in the coin/ sub-directory
are used and shared across repositories.
Change-Id: I1d832c3400e8d6945ad787024ba60e7440225c08
On macOS it's possible to configure the system locale to not do digit
grouping (separating "thousands", in most western locales); it then
returns an empty string when asked for the grouping character, which
QLocale's system-configuration then ignored, falling back on using the
base UI locale's grouping separator. This could lead to the same
separator being used for decimal and grouping, which should never
happen, least of all when configured to not group at all.
In order to notice when this happens, query() must take care to return
an empty QString (as a QVariant, which is then non-null) when it *has*
a value for the locale property, and that value is empty, as opposed
to a null QVariant when it doesn't find a configured value. The caller
can then distinguish the two cases.
Furthermore, the group and decimal separators need to be distinct, so
we need to take care to avoid cases where the system overrides one
with what the CLDR has given for the other and doesn't over-ride that
other.
Only presently implemented for macOS and MS-Win, since the (other)
Unix implementation of the system locale returns single QChar values
for the numeric tokens - see QTBUG-69324, QTBUG-81053.
Fixes: QTBUG-80459
Change-Id: Ic3fbb0fb86e974604a60781378b09abc13bab15d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
It was more complex than it needed to be and was a test of QString,
not of QLocale. This leaves tst_QLocale::negativeZero() available to
now test how QLocale handles negative zero.
Change-Id: Ic9aae250c29f579e6d60fba8404b38673a3b489f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have long (since 4.5.1) coerced it to lower-case, for no readily
apparent, much less documented, reason. CLDR says most locales use an
upper-case E for this - let's actually use what CLDR says we should
use.
The code that matches the exponent separator was doing so
case-insensitively in any case; that needed adaptation now that the
separator's case isn't pre-determined; and, in any case, should have
been done using case-folding rather than upper-casing. In the process,
removed some spurious checks for "'e' or 'E'" in the result, since the
exponent separator is always represented by 'e' (and an 'e' might also
be present for the separate reason of its use as a beyond-decimal
digit representing fourteen).
[ChangeLog][QtCore][QLocale] QLocale::exponential() now preserves the
case of the CLDR source, where previously it was lower-cased.
Change-Id: Ic9ac02136cff79cb9f136d72141b5dbf54d9e0a6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use QStringIterator rather than indexed loops. This fixes handling of
non-BMP code points (which may be lower or uppercase, see the test).
Change also the semantics of the functions, adopting Unicode §3.13
definitions: a string is lowercase/uppercase if it's equal to its
own toLower/toUpper folding.
As a side effect, empty strings are now correctly reported to be
lowercase AND uppercase.
[ChangeLog][Important Behavior Changes] The semantics of
QString::isLower() and QString::isUpper() have been changed to match the
Unicode specification. Now lowercase (resp. uppercase) strings are
allowed to contain any character; a string is considered lowercase
(resp. uppercase) if it's equal to its own toLower() (resp. toUpper())
folding. Previously, a non-letter character would make the string not
lowercase nor uppercase, and the mere presence of an uppercase (resp.
lowercase) letter would make isLower() (resp. isUpper()) return false,
even if the letter wouldn't change under case folding. As a
consequence, now empty strings are lowercase and uppercase.
[ChangeLog][QtCore][QString] Fixed a number of bugs of
QString::isLower() and QString::isUpper(). Empty strings are now
correctly reported to be lowercase (resp. uppercase), and strings
containing code points outside the BMP are now correctly handled.
Note that the behavior of these functions has also been changed.
Change-Id: Iba1398279a072399a9f21295fe75f6e414f3f813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the presence of multiple overloads of a function taking either
QString or QStringView, QStringView should always be preferred.
The rationale is that the QStringView overload may have been
added "later" (read: the function was written when QStringView
was not available yet, so it took QString), and the fact that
a function with the _same name_ offers a QStringView overload
implies the function never needed to store/own the string in
the first place.
Add a (compile-time) test for this preference. This is in
preparation for a future QString(char16_t*) constructor
(in Qt 5.15 / Qt 6).
Change-Id: I60a435e494b653548f8f8d52c5d7e7cac2cc875a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
When QLocale::Country is set to QLocale::India numbers are written so that
after first three from the right and then after every second will be comma.
E.g. 10000000 is written as 1,00,00,000
Task-number: QTBUG-24301
Change-Id: Ic06241c127b0af1824104f94f7e2ce6e2058a070
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
QString(View)s can be built or manipulated in ways that make them
contain/refer to improperly encoded UTF-16 data. Problem is,
we don't have public APIs to check whether a string contains
valid UTF-16. This knowledge is precious if the string is to be fed in
algorithms, regular expressions, etc. that expect validated input
(e.g. QRegularExpression can be faster if it can assume valid UTF-16,
otherwise it has to employ extra checks).
Add a function that does the validation.
[ChangeLog][QtCore][QStringView] Added QStringView::isValidUtf16.
[ChangeLog][QtCore][QString] Added QString::isValidUtf16.
Change-Id: Idd699183f6ec08013046c76c6a5a7c524b6c6fbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're now using the same infrastructure for QVector,
QString and QByteArray.
This should also make it easier to remove the shared null
in a follow-up change.
Change-Id: I3aae9cf7912845cfca8e8150e9e82aa3673e3756
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Preparations to move QString over to use QArrayDataPointer instead
of it's own private struct.
Change-Id: I7796a595393394083f6a85863e3c710ebbdea149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The goal here is to move things over to QArrayDataPointer. This prepares
for it.
Change-Id: I32f54a47594274799600c618f7341c200ceaa306
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We already detach immediately since change
c2d2757bcc. That basically removes
the main purpose of having QChar/ByteRef, and we can just as well
get rid of those classes for Qt 6.
Change-Id: I8dc566a1948ddc29c0cb8a77ec7310654a7219a4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I'd have preferred to use QArrayDataPointer<ushort> for QString, but
that option wasn't the best one. QArrayDataPointer try to do some
operations using QArrayDataOps and that would expand to unnecessary
code. What's more, the existing code expected to be able to modify and
access the d pointer.
Instead, this commit introduces QStringPrivate (named differently from
QStringData to catch potential users), which contains the three
members. This POD class is also used in QJsonValue to store the
"inlined" QString. QHashedString in qtdeclarative will need a similar
solution.
Change-Id: I33f072158e6e2cd031d4d2ffc81f4a8dbaf4e616
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The next change will stop using some values in the reference counter as
settings from the data.
Change-Id: I94df1fe643896373fac2f000fff55bc7708fc807
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The Mutable flag now contains the information on whether the data this
QArrayData points to is mutable. This decouples the mutability /
immutability setting from the allocation and from the type of data,
opening the way for mutable raw or foreign data.
There are still plenty of places in the source code that check the
size of the allocation when it actually wants d->isMutable(). Fixing
this will require reviewing all the code, so is left for later.
The needsDetach() function is moved to QArrayData and
de-constified. It returns true when a reallocation is necessary if the
data is to be modified.
Change-Id: I17e2bc5a3f6ef1f3eba8a205acd9852b95524f57
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test passed mostly by accident so far, as the created QByteArray
was shorter than what the test assumed.
Change-Id: I06858801d83a504eadc73ec2be281c88f8ffad5d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QByteArray::fromBase64 was liberal in its input, simply skipping
over invalid characters. As a side-effect of this, it had
no error reporting, meaning it could not be used to convert
fromBase64 _and_ validate the input in one go.
Add more option flags to make fromBase64 strictly validate
its input. Since we want to know whether it has succeeded
or not, and the existing fromBase64 overloads do not
allow for that, introduce a new function that returns
an optional-like datatype.
While at it: base64 decoding can be done in-place; add an
rvalue overload to enable this use case.
[ChangeLog][QtCore][QByteArray] Added the new fromBase64Encoding
function.
[ChangeLog][QtCore][QByteArray] Added new flags to make
fromBase64 / fromBase64Encoding strictly validate their input,
instead of skipping over invalid characters.
Change-Id: I99cd5f2230f3d62970b28b4cb102913301da6ccd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allegedly Apple has fixed the bug that made this necessary, so we
should be able to include these two test-cases once more.
This reverts commit ba9585bd02.
Fixes: QTBUG-69875
Change-Id: I5ac6019c0d647691eda6cdbb2a53e7471859d4a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The assumption when calling QStringRef::toString() on a null
QStringRef (i.e. when QStringRef::isNull() is true) is that
QStringRef::toString().isNull() will also return true. With the
current implementation we return a null QString() only when the
QStringRef references a nullptr QString. We need to do the same
also when QStringRef references a QString with null private data.
Change-Id: I4177a5ea187ae758d7c46fe76a9d0583140e90cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to teach the update program to accept category Lm as for
Joining_Transparent, for the sake of a new ArabicShaping.txt entry.
Added three new Unicode versions, several new scripts and a new
word-break class.
Updated UCD's test data for tst_QTextBoundaryFinder. This left 57
tests failing; I have commented out the data rows for those tests,
pending someone with more knowledge addressing this.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Change-Id: Ic33d3b3551195d47a84d98e84020f57a68f0b201
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Released on October 4th.
Adds Windows names for two time zones, Qyzylorda and Volgograd.
Added languages Chickasaw (cic), Muscogee (mus) and Silesian (szl).
Norwegian number formatting has flipped back to using colon rather
than dot as time separator; it's flipped back and forth over the last
several CLDR releases. The dot form is present as a variant, the
colon form was long given as the normal pattern, then went away; but
now it's back as a contributed draft and that's what we pick up.
The MS-Win time-zone ID script was iterating a dict, causing random
reshuffling when new entries are added. Fixed that by doing the
critical iteration in sorted order.
Omitted locales ccp_BD and ccp_IN due to QTBUG-69324.
Task-number: QTBUG-79418
Change-Id: I43869ee1810ecc1fe876523947ddcbcddf4e550a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The qmake config for tst_QString tried to impose QT_NO_CAST_TO_ASCII
on it, but the source file explicitly #undef-s this symbol and its
friends. Leave the define commented out in the .pro so that a comment
can explain why it's no good.
Change-Id: I7620f4e104f0cdab05fdc246b903c40026e63d76
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test QT_CONFIG(icu) in the code instead of testing qtConfig(icu) in
the profile and setting an extra define just to shadow what's already
defined. Also remove the matching define from qcollator.pro, whose
test code didn't use it.
Noticed while reviewing the conversions to CMake.
Change-Id: I19d3b1026b2a8f50ec424c450614e721500fd38a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Thiago Macieira
Tor Arne Vestbø
Edward Welbourne
Sona Kurazyan
Alexandru Croitor
Lars Schmertmann
Jarek Kobus
Lars Knoll
Marc Mutz
Karsten Heimrich
Giuseppe D'Angelo
Oliver Wolff
Andrei Golubev
Qt Forward Merge Bot
Edward Welbourne
Cristian Adam
Simon Hausmann
Liang Qi
Leander Beernaert
Tuomas Heimonen
Friedemann Kleint
Allan Sandfeld Jensen