This test doesn't fail anymore on CI.
Task-number: QTBUG-90545
Change-Id: I3ccf5a4378ba48e0b1e3ce81b0fdd8ab010f75a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There's several ways to compare HTTP headers, and arguably
the need for it is not very high. For the time being users can use
different accessors and compare in ways that make sense for
their use cases.
Consequently since HTTP headers are no longer trivially comparable,
it makes also comparing the request factories more 'moot' because
headers are a central piece of request information. So removed
comparison from request factory as well.
These comparisons can be restored later if a clear understanding
on it's need, and on how it should be best done, emerges.
Resulted from API-review
Pick-to: 6.7
Change-Id: Idb5ab3710268b52a8e59656db8cc7de82f0ae511
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The json return type and function naming has gone back
and forth. Let's go with QJsonDocument after all, and add new
overloads in future if necessary.
Pick-to: 6.7
Task-number: QTBUG-119002
Change-Id: I3f9de0e6cba7d5c52d016d252d65b81f345af050
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Provides the possibility to read text data as it arrives, instead
of needing to wait until the whole body is received.
Pick-to: 6.7
Task-number: QTBUG-119002
Change-Id: I64f90148fd41a77c4ae2d5dbd6194a924a9f3a86
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The vast majority of header fields appear only once, but there was no
efficient way to get that value: values() returns as a
QList<QByteArray> (allocating) while combinedValue() returns a
QByteArray constructed from values().join() (also allocating).
It follows that the QHttpHeaders API is incomplete (lacks an efficient
basis of operations in EoP terms).
Add a value() function that returns either the value or a
user-provided fall-back as a QByteArrayView. Unlike values() and
combinedValue(), this function can be noexcept, greatly improving
codegen for callers.
Found in API review.
Pick-to: 6.7
Task-number: QTBUG-107042
Change-Id: I2da20815fd46fdd7f150c224f41eee53abed313e
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Clean up the C'n'P in the test a bit before adding tests of new
functions.
Pick-to: 6.7
Task-number: QTBUG-107042
Change-Id: I2da20815fd46fdd7f150c224f41eee53abed313d
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was forgotten when we originally fixed the hardcoded 1_1 version.
Pick-to: 6.7 6.6 6.5
Change-Id: Iff3148d79466dac2830fe9a63d954aead96fb0ac
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It is somewhat common HTTP method with RESTful use cases
(partial updates on resources)
Task-number: QTBUG-114637
Change-Id: Id252d3f4b54c3ebb8df5c93259e64a4af2d0ca2f
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Added to both QNetworkRequestFactory and QRestAccessManager
Task-number: QTBUG-114717
Change-Id: Ibca55bba548a034a0da7ea60550642c150b63dc2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Provide users with means to use more modern time/duration type.
Please note that since QTimer does not currently support
timeouts larger than 'int' milliseconds, the limit on how long
durations can be expressed, remains. This should not
be an issue in practice with network requests, as a typical
int32 system can express timeouts of ~24 days.
[ChangeLog][QtNetwork][QNetworkAccessManager] Add std::chrono
support for transfer timeout.
[ChangeLog][QtNetwork][QNetworkRequest] Add std::chrono support
for transfer timeout.
Fixes: QTBUG-118714
Change-Id: If85678a5994c59bac5926e47f98c9cfeb2a07c30
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
These include:
- readyRead(), signal for indicating new data availability
- bytesAvailable(), function for checking available data amount
- downloadProgress(), signal for monitoring download progress
Task-number: QTBUG-114717
Change-Id: Id6c49530d7857f5c76bd111eba84525137294ea7
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The class provides a way to represent server-side service endpoints.
With RESTful applications these endpoints typically have a need for
repeating requests fields such as headers, query parameters,
bearer token, base URL, SSL configuration. This class allows setting
of the repeating parts, while allowing the setting of changing parts
on a per-request basis.
[ChangeLog][QtNetwork][QNetworkRequestFactory] Added a new convenience
class to help with the needs of repeating network request details
imposed by the server-side service endpoints, which is common
with RESTful applications.
Task-number: QTBUG-113814
Change-Id: Iabcfaed786949ffbb0ad0c75297d0db6ecc1a3cc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mate Barany <mate.barany@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
New QHttpHeaders class for use in place of
std::pair<QBA,QBA>, QMap<QBA>, and QMultiMap/Hash<QBA,QBA>
to represent HTTP headers.
[ChangeLog][QtNetwork][QHttpHeaders] New QHttpHeaders class
Task-number: QTBUG-107042
Change-Id: I54766886a491acfc9a813a3414322a75011acb9d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
It previously had to kludge a 1900-to-1999 date into a 1950-to-2049
range; it can now tell QDTP to do that for it. In particular, this
fixes a problem with 00-02-29, which failed to parse using 1900 as
base year so couldn't be corrected to 2000-02-29, which is now the
date it finds directly.
Task-number: QTBUG-46843
Change-Id: I7ac936bdfb15b78daed5d237c5d921c800af4951
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove the following CIs from BLACKLIST files as they are no longer
used:
- msvc-2015
- msvc-2017
- windows-7sp1
- opensuse-42.3
- ubuntu 16.04/18.04/20.04
- rhel 6.6/7.4/7.6
- redhatenterpriselinuxworkstation-6.6
Change-Id: Ief9550e3455a1ed211d978933262c8d5557b0fec
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
It fails frequently. Might have to blacklist the entire test case, or
even skip when running on qemu, if this doesn't help.
Task-number: QTBUG-119616
Pick-to: 6.6
Change-Id: I446612c0fb5b2afc021aeb2fab9be010ac071acd
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
When SSL backends were broken out as plugins, various tests were
suppressed since the code they test is now in a plugin, no longer part
of the network libraries.
The ASN.1 test is, however, fairly self-contained, so just compile it
with the relevant plugin sources (which are likewise self-contained)
and brute-force the paths to line up for the test.
Task-number: QTBUG-46843
Change-Id: I778489e68b7361a7fd55c88d2a35257ad6a58c46
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By parsing QDate and QTime separately it will internally parse the
values as-if-by UTC. This means we avoid the overhead of figuring out
what the local timezone is repeatedly for each certificate.
On Windows, with Schannel, this brings QAsn1Element::toDateTime
from consuming more than 97% of the test time to below 10%.
The test being tst_QSslSocket::systemCaCertificates. It also goes
from taking 1 minute in debug, to 1 second.
As a drive-by: add a (currently) failing test for Feb 29 2000, which
fails because we decode the date as 1900 before adjusting it to 2000.
But there is no 1900-02-29, so it returns an invalid date. As spotted
by Eddy.
Pick-to: 6.6 6.5
Change-Id: Iefa73a01d710129faf6412c4fa8bc2b5d7c98bbb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Broadcasting is only supported with IPv4. Previously set AnyIPProtocol
was handled the same as IPv6, which does not support it, so system
library was returning error code and initialization was failing.
Task-number: QTBUG-115777
Change-Id: Iefb1c7237d18cd7af7ccd53f7e5f3f5749a12fd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure the reply is marked as finished and that the body is received
even if we didn't succeed.
In a real scenario that would include some text like Access Denied.
Also, no longer clear() the authenticationHeader in the server, since
that meant the server would not send the header again if the client
failed to authenticate. Luckily this wasn't actually causing any
problems before, since we only tested the expected www-authenticate
header.
As a drive-by: clang-tidy complained about not using const-ref for a
lambda.
Pick-to: 6.6 6.5 6.2
Change-Id: Ia4452fff7d9370d7d460433257d84eff0a6f469b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since we use runtime plugins now and the test doesn't use any
symbols from openssl
Amends 486b1aec16
Pick-to: 6.6 6.5
Change-Id: Ib66d1ca15835c41fe138c7830ce3edd0bdce0d5f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The declaration was moved out of the #if QT_CONFIG(openssl) block at
some point, but the definition was not. This caused compilation errors
when building without OpenSSL configured.
Pick-to: 6.6 6.5
Change-Id: I41ed85fd57f5a912498e0f2517761b81a7b8673c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add two overloads to QNetworkAccessManager to support GET requests
with body.
Modify QNetworkReplyHttpImpl as well as these requests should not
be cached.
If the request is redirected it is possible that its type changes
from POST/PUT to GET and in this case the message body is deleted.
However, if a GET request has a body it should keep it after it has
been redirected - modify QNetworkReplyHttpImpl to keep the message
body after it has been redirected.
Fixes: QTBUG-112871
Change-Id: Ib01898638ed94238a98291870a5c51d56030868a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
We were using the .remove(Key) API on the map instead of
erase(iterator), so we were removing any reply of the same priority that
had not yet been popped from the queues.
Rewrote to drop loop and only work with iterators.
This issue was there since SPDY days, so not picking all the way back to
5.15, where HTTP2 anyway is not enabled by default.
As a drive-by, drop the #ifndef QT_NO_SSL, which was also there from
SPDY times, which was TLS-only.
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-116167
Change-Id: Id7e1eb311e009b86054c1fe3d049c760d711a18a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Makes it easier to get an idea of what went wrong
Change-Id: Idace20ecf008fa906780881b62ed44ac36751123
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
qnativesocketengine_win.cpp: don't check if timeout is < 0, because
remainingTimeAsDuration() doesn't return negative values.
All the changes done in one go, not function by function, as that causes
the least churn. You can think of them as a couple of very similar
changes repeated various times.
Drive-by change: replace `forever {` with `for (;;)`
Task-number: QTBUG-113518
Change-Id: Ie9f20031bf0d4ff19e5b2da5034822ba61f9cbc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By fixing how many requests we are expecting to _finish_.
Since the nRequests variable is only decreased once a
request is finished, we only actually expect 1. No matter
how many times it gets redirected.
This was the slowest test-function in the test, clocking in at
10 seconds. Now it's sub 500ms.
Pick-to: 6.6 6.5
Change-Id: I544360f0928466c1bc0fbc6806952ccec588d131
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There was an extra `q` before dnslookup.
Found while trying to build tst_qdnslookup, the target wasn't seen by
CMake/Ninja.
Pick-to: 6.6
Change-Id: Id594aab30dc9081fc269541561e0f2db5e615657
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
See code review 496440 on Gerrit for the details.
Change-Id: Ibd32a44cf7e2e07f36687cc2f0eeaf3008f64e73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The pre-existing test for QLocalServer was testing only a minor subset
of cases, so replace it with the call to
QTestPrivate::testReadWritePropertyBasics.
The test for QLocalSocket's bindable properties was missing, so add
it.
The new tests didn't reveal any problems.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I695bb050d39eeae9ffb84c097c36601a4ca89af6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The pre-existing tests were not using the QTestPrivate helpers, so
extend them with the call to QTestPrivate::testReadWritePropertyBasics.
The updated test didn't reveal any problems with binding loops, so no
other action is required for now.
Task-number: QTBUG-116346
Pick-to: 6.6 6.5
Change-Id: I51a17974a7f5bec3c969fcb55b6f28e3e9218eb5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Private libraries and WrapOpenSSL were linked conditional to
QT_FEATURE_private_tests in the CMake file.
qsslkey_p.h and open ssl symbols were included conditional to developer
build. A developer build fails, with test enabled and private tests
disabled.
=> Change the CMake condition to QT_FEATURE_developer_build, to resolve
mismatch between CMake and cpp file.
Pick-to: 6.6 6.5
Change-Id: I3ac93b02701e467a0b548c35d441d35a45c4568b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
OpenSSL 3.1.2 can be configured with no-deprecated option, in this
case test fails to build.
Pick-to: 6.6 6.5 6.2
Change-Id: Icaf457f55fb001b632922856dbe4bbb5bdba220e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Let's do it in initTestCase(), where we're already searching for IPv6
addresses, instead of storing the information in a local static.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177efb6a055aaa58
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This was disabled in d0d1d74033, I guess
accidentally, by a too-wide conditional. The change the same commit
applied to QtNetworkSettings didn't make the same mistake.
I am also opportunistically updating the conditional to QT_CONFIG (I
missed this in 9d4579c1cd) and adding the
Linux-specific check, as the AF_NETLINK implementation does not rely on
getifaddrs() or if_nametoindex().
Drive-by fix indentation.
Pick-to: 6.6
Change-Id: Ifa1111900d6945ea8e05fffd177ef8fcb11b4e1e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Joerg Bornemann
Juha Vuolle
Axel Spoerl
Marc Mutz
Mårten Nordheim
Edward Welbourne
Christian Ehrlicher
Volker Hilsheimer
Tomasz Kozłowski
André Klitzing
Mate Barany
Ahmad Samir
Ivan Solovev
Timur Pocheptsov
Thiago Macieira
Ievgenii Meshcheriakov