Adds an opt-in experimental DirectWrite-based font database.
This cannot be the 100% replacement for GDI unfortunately, since
quite a few font formats used on Windows are still unsupported.
But it would be good to have it as an opt-in experimental feature
since it should make it easier to solve multiple font selection
issues we have on Windows.
In order to still share the DirectWrite-specific code between
the old and new database, this introduces a common base class.
Note that the feature depends on DirectWrite 3 support (Windows 10).
Fixes: QTBUG-74917
Change-Id: Ida08ec7ef4fda9fc78622ca4297909a727390a64
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Read the dark mode setting and make it accessible
via native interface.
Add a command line option to set the support level.
Task-number: QTBUG-72028
Change-Id: I1e9fe296a6b1bda81512d003183038b866b67545
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Sort alphabetically and add recent relevant options with version
information.
Change-Id: I10c8cc82ce357775ed68cb811a0c906cd38633a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change the default rounding policy to "Round" so that 2 is used
for 150% (144DPI) on Windows, as it was in 5.13.
Fixes: QTBUG-80934
Change-Id: I0cba986ce6afc9e2737c656000ad854c07844360
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
Don’t reset highDpicaleFactorRoundingPolicy in the
QGuiApplication destructior. This is a static property,
independent of the application object lifetime.
Change-Id: Ibf55e2a6ea1ae6429fce3f0e9d58323111aac374
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt 5.14 introduced QApplication::scaleFactorRoundingPolicy,
where the default policy rounds the scale factor to
an integer, which matches Qt's behavior on Windows and X11.
However, Qt has never rounded scale factors on Android.
Restore the historical behavior and document the platform
difference.
Change-Id: I0f8e8fb65e3874338ea290bbb12da350da22f099
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The two static setPalette methods in QApplication and QGuiApplication
should have the same behavior in terms of what signals and events
they emit.
Change-Id: I54579d490e31f3783e2d4fea689ca799a070ff1d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After 8fb881900c it's tracked by AA_SetPalette. Since the latter
is publicly observable we remove the internal flag instead.
Change-Id: Ie69799f1b45d68017cb9eaab2a9986cc9ac9ca38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Move away from using 0 as pointer literal.
Done using clang-tidy. This is not complete as
run-clang-tidy can't handle all of qtbase in one go.
Change-Id: I1076a21f32aac0dab078af6f175f7508145eece0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Amends qtbase/af2daafde72db02454d24b7d691aa6861525ab99.
Where applicable, port over to member initialization, thus also
fixing nullptr warnings.
Change-Id: Iaaf2dbbbcf2952253390b8839fd15a1b17be32c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since the backend is async, the settings will not be ready to read/write
instantly as on other platforms, but only be ready after the
filesystem has been synced to the sandbox. This takes at least 250 to
500 ms. The QSettings status() or isWritable() can be used to discern when the
settings are ready for use.
This also fixes a crash in threaded wasm
Task-number: QTBUG-70002
Fixes: QTBUG-63923
Fixes: QTBUG-79650
Change-Id: If24c6ada1b91b2a565ed6733da74972c3027f622
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Instead of having each platform plugin deal with application termination
in their own weird ways, we now have a QPA API to signal that the system
requested the application to terminate.
On the QGuiApplication side this results in a Quit event being sent to
the application, which triggers the default behavior of closing all app
windows, and then finally calling QCoreApplication::quit().
The quit event replaces the misuse of a close event being sent to the
application. Close events are documented as being sent to windows.
The close events that are sent to individual windows as part of the
quit process can be ignored. This will skip the final quit() of
the application, and also inform the platform that the quit was
not accepted, in case that should be propagated further.
In the future the logic for closing windows should be unified
between the various approaches in closeAllWindows, shouldQuit,
and friends.
Change-Id: I0ed7f1c0d3f0bf1a755e1dd4066e1575fc3a28e1
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The base WindowSystemEvent has had an eventAccepted flag since 2014.
Change-Id: Ia0aa795083cd98ece83a4c1cc010d3a25e2489fd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
We want to ensure that the qt4D and qt4O members are still initialized
the same way whenever deprecated constructors are used; and we want to
be able to verify it using qDebug. So we merely suppress these
warnings.
Change-Id: Ic2e5f0dd6feeabe81f06f9c31693c550ac0781e3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QGuiApplication::screenAt() is documented "If the point maps to more
than one set of virtual siblings, the first match is returned."
But in many cases it's possible to start from a known screen and
consider only its siblings, as when deciding where to open a QMenu
from a QMenuBar: the QMenuBar is already shown on some screen(s),
so the QMenu must be shown on a sibling from that set. This function
should be useful in other such cases too, hence it might as well
be public API.
Task-number: QTBUG-76162
Change-Id: I83c74b40eb53f56fb285a6074a3dc2c0ea9c570b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is to inform Qt Quick when a stationary touchpoint is delivered
that it is because of a changed property. Qt Quick still needs to avoid
delivering item-customized events (with only the touch points that occur
inside the item) that contain only stationary touch points without
changed properties. To be able to check this private flag,
QQuickPointerTouchEvent needs to be a friend.
Task-number: QTBUG-77142
Change-Id: I6ee0dffbbeca9e513c77227b757252e2eec6a4ef
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In QImageReader, also replace a QMutex with a QBasicMutex, making the
code similar to the corresponding code in QPicture.
Change-Id: Ia1cd546eccd3662837762e506235e350b7a08647
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
src/corelib/global/qnamespace.qdoc:3279: (qdoc) warning: Can't link to 'QGuiApplication::setHighDdpiScaleFactorRoundingPolicy()'
src/corelib/time/qislamiccivilcalendar.cpp:49: (qdoc) warning: Can't link to 'QJijriCalendar'
src/network/ssl/qsslsocket.cpp:1510: (qdoc) warning: Can't link to 'QSslConfiguration::defaultCaCertificates()'
src/network/access/qhttp2configuration.cpp:49: (qdoc) warning: '\brief' statement does not end with a full stop.
src/gui/text/qtextformat.cpp:532: (qdoc) warning: Undocumented enum item 'TableBorderCollapse' in QTextFormat::Property
src/gui/text/qtextdocument.cpp:2066: (qdoc) warning: Undocumented enum item 'UnknownResource' in QTextDocument::ResourceType
src/gui/kernel/qguiapplication.cpp:3500: (qdoc) warning: Undocumented parameter 'policy' in QGuiApplication::setHighDpiScaleFactorRoundingPolicy()
Change-Id: I3573ef98cf9b58d16525c356270fe009fdffcf45
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
As a rule, we don't deliver touch events containing only stationary
touchpoints. To fix QTBUG-52510 we added an exception in
1bd0ab7050 : if the velocity changed,
deliver it anyway. Now we need to do the same if the pressure changed.
Also, on the customer's hardware, pressure is indicated via ABS_MT_PRESSURE.
Change-Id: If7f7088df055d686cdd86967b999e38024f8170f
Fixes: QTBUG-77142
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Emitting a signal executes an unknowable amount of code. We shouldn't
hold a mutex while doing so. E.g., if the signal emission causes
another call to QGuiApplication::setFont(), the old code would
deadlock, since applicationFontMutex is not recursive.
Fix by taking a copy of the application font under mutex protection,
then dropping the lock for the emission of the signal.
Change-Id: Ib2569b3a08af6ef5f38459a19f74cb0db27b7772
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This API enables tuning of how Qt rounds fractional scale factors, and
corresponds to the QT_SCALE_FACTOR_ROUNDING_POLICY environment
variable
New API:
Qt::HighDPiScaleFactorRoundingPolicy
QGuiApplication::setHighDpiScaleFactorRoundingPolicy()
QGuiApplication::highDpiScaleFactorRoundingPolicy()
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Task-number: QTBUG-53022
Change-Id: Ic360f26a173caa757e4ebde35ce08a6b74290b7d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In the case that no plugins are specified, the above code would assert
since we are not checking whether there is a value in the variable name.
Change-Id: Ia5922a6936aff179ca19fdd10e335133cd30daf4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt 5.0, delta() and orientation() were already marked obsolete,
but Widgets and tests have kept on depending on them all this time.
We now start using alternative API so they can really be deprecated.
All constructors except the newest one are also deprecated.
The plan is for all events from pointing devices to have
QPointF position() and globalPosition(), so we deprecate
the other position accessors.
[ChangeLog][QtGui] Obsolete constructors and accessors in QWheelEvent
now have proper deprecation macros. What is left is intended to be
compatible with planned changes in Qt 6.
Change-Id: I26250dc90922b60a6ed20d7f65f38019da3e139e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Additionally, we also add a Q_TRACE_EXIT which runs a trace point when
the scope is exited, leveraging qScopeGuard behind the scenes.
Q_TRACE_SCOPE uses Q_TRACE_EXIT internally - the difference is that
the _SCOPE version enforces the naming scheme of _entry / _exit for the
tracepoints, whereas Q_TRACE_EXIT can be used generically.
Change-Id: I4a2f5ea09f451fcf664d07fd493b679f7527ac06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace null and '\c nullptr' with \nullptr in the documentation.
Change-Id: I58934eea06943309ba895833f1991629870ab45b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Qt for Python users reading the documentation assume that int(0) can
be passed for pointer parameters. Use the newly introduced \nullptr to
disambiguate this.
In a follow-up step, the \nullptr macro can be defined as None
when generating the Qt for Python documentation.
Task-number: PYSIDE-903
Change-Id: I3a45f87175a0668ab5f3f95f0aff409f7e3ef027
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Christian Tismer <tismer@stackless.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
corelib/serialization/qcbormap.h:176:14: warning: Missing reference in range-for with non trivial type (QPair<QCborValue, QCborValue>)
corelib/serialization/qjsoncbor.cpp:820:10: warning: Missing reference in range-for with non trivial type (QJsonValue)
gui/kernel/qguiapplication.cpp:1171:10: warning: Missing reference in range-for with non trivial type (QString)
printsupport/dialogs/qprintdialog_unix.cpp:741:10: warning: Missing reference in range-for with non trivial type (QString)
printsupport/kernel/qprinter.cpp:1851:10: warning: Missing reference in range-for with non trivial type (QVariant)
tools/qlalr/cppgenerator.cpp:463:8: warning: Missing reference in range-for with non trivial type (Name)
Change-Id: I327b0f116e329e55952ed5740a5f5af4b2918392
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a tooltip was shown on an application modal dialog then it would end
up blocking mouse events to the dialog while the tooltip was visible.
Since tooltips are special in this case, they should not cause mouse
events to be blocked.
Fixes: QTBUG-65599
Change-Id: Ibf1729ca4942f5854e4f9687c5586382e23c1c31
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Move the checking logic from QGuiApplicationPrivate::_q_updateFocusObject()
to QInputMethodPrivate::objectAcceptsInputMethod(), which is also called
from QWidget::updateMicroFocus() via QInputMethod::update().
Fixes: QTBUG-56767
Change-Id: Ia4cce5e7e766008df891537048d5daf739c010ff
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Snap now uses xdg-desktop-portal for portal support. Add check for apps
running in Snap and make them use portals by default. We also should be
using different name for the platform theme used by sandboxed apps.
Change-Id: Ibaa35b7549b3d94775d7edb937f729a300d071b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is the squashed diff from wip/webassembly to dev.
Done-with: Peng Wu <peng.wu@intopalo.com>
Done-with: Sami Enne <sami.enne@intopalo.com>
Done-with: Morten Johan Sørvig <morten.sorvig@qt.io>
Started-by: Andrew Knight <andrew.knight@intopalo.com>
Change-Id: I6562433c0a38d6ec49ab675e0f104f2665f3392d
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
According to MSDN, AltGr key presses are sent as a
sequence of SYS left Ctrl + right Alt.
Add an option to detect AltGr as modifier key.
Task-number: QTBUG-69317
Change-Id: I30ce169d2e6dbbae194ff714abfbc732b53652ce
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The platform may emit screen changes for child windows before top-level
windows, so we need to update the top level screen as soon as possible.
Change-Id: I090c620725c9c3171f5b038708d78ddfeec8512d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use CamelCase, like the API they're tracing.
Change-Id: Ie718ab624d17c9186bcf05cc1276c8eccad7f454
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This was a regression from Qt4 and also is the documented behavior.
In addition this patch fixes various issues with cursor shape updating
that were discovered along the way and that are necessary for testing
the new changes.
The code in QGuiApplicationPrivate::processDrag() also needed a fixup,
particularly the resetting of QGuiApplicationPrivate::currentDragWindow.
Without this fix we would get DragMove (the one that immediately follows
the DragEnter) only for the first DragEnter event. For example when dnd
starts on mouse press then for mouse click we would get:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragLeave
but the expected is:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragMove->DragLeave
Task-number: QTBUG-34331
Change-Id: I3cc96c87d1fd5d1342c7f6c9438802ab30076e9e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
[ChangeLog][Wayland] In Qt 5.11.0, support for selecting a platform plugin based
on the XDG_SESSION_TYPE environment variable was added. On gnome-shell, however,
bugs—in both Qt and gnome-shell—made many widget applications almost unusable.
So until those bugs are fixed XDG_SESSION_TYPE=wayland is now ignored on
gnome-shell.
Task-number: QTBUG-68619
Change-Id: I902acd1c4fc996f46e8431c12c0a5cdbab883abf
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
... instead of using a hack of directly accessing QGuiApplication
members.
The current QPA API was bad for two reasons:
1) It expects platform plugin authors to know about
internals of Qt Gui, particularly that QGuiApplication
uses QGuiApplication::{mouseButtons,keyboardModifiers}
to construct QDragMoveEvent and QDropEvent events. Which
results in the second reason why this is bad.
2) Platform plugins should not directly access member
variables of QGuiApplication, just to make sure that
QDragMoveEvent and QDropEvent events contain correct state.
Platform plugins should instead use QWindowSystemInterface
to communicate with Qt Gui (which is also the solution here).
The solution is to extend QWindowSystemInterface::handle{Drag,Drop}
to require mouse/keyboard state. We already do this for
some of the other methods, so it is nothing extraordinary.
This type of interface is also _required_ to support
drag-n-drops from other processes. We can't use
QGuiApplication::{mouseButtons,keyboardModifiers} when the
drag originates from another process, instead we need to
query mouse/keyboard state from the system.
This patch fixes drag-n-drops from others processes on XCB
platform plugin.
Task-number: QTBUG-57168
Change-Id: I3f8b0d2f76e9a32ae157622fef801829d629921d
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes Qt application try to launch using wayland in a wayland session,
even if it was a default desktop build.
Change-Id: Ib7d4a79fbe777527d1862bd775627afae10b1e9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we have this documentation for the Windows platform plugin,
it makes sense to also have it for Cocoa.
Task-number: QTBUG-67372
Change-Id: I170ae251572c8e209643a582cdd7350aaf5c7ccd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
-geometry, -title and -icon for xcb did not work if the platform string had
arguments or there were fallback platforms.
Only accept the arguments if xcb is the default platform. I.e. ignore the
arguments if xcb is a fallback.
This now works:
./application -platform "xcb:someArg=value" -title specialXcbTitle
./application -platform "xcb;wayland" -title specialXcbTitle
./application -platform "xcb:someArg=value;wayland" -title specialXcbTitle
But this does not:
./application -platform "wayland;xcb:someArg=value" -title specialXcbTitle
Change-Id: I4ee20b1ed722bc98417a5e75db7d8c98ffcdfcfe
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
[ChangeLog][QtGui] QT_QPA_PLATFORM and the -platform argument now support a
list of platform plugins in prioritized order. Platforms are separated by
semicolons.
The plugins are tried in the order they are specified as long as all preceding
platforms fail gracefully by returning nullptr in the implementation of
QPlatformIntegrationPlugin::create()
This is useful on Linux distributions where the Wayland plugin may be
installed, but is not supported by the current session. i.e. if X11 is running
or if the compositor does not provide a compatible shell extension.
Example usage:
QT_QPA_PLATFORM="wayland;xcb" ./application
or
./application -platform "wayland;xcb"
Task-number: QTBUG-59762
Change-Id: Ia3f034ec522ed6729d71acf971d172da9e68a5a0
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This makes the documentation match the implementation.
-platform overrides QT_QPA_PLATFORM, not the other way around. Similarly
for the other arguments.
Change-Id: Iffaf8bb1134bc57e5b682f37b9cc1a713872ede1
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
WindowScreenChanged events might be reported repeatedly from the QPA backends
until the event has reached GuiApplicationPrivate::processWindowScreenChangedEvent()
which sets the screen. Ignore events in case the screen is already correct.
Task-number: QTBUG-65580
Task-number: QTBUG-62971
Change-Id: Ie5fc9830771e816db942355efbe5a48e829914cb
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This commit introduces minimal support for instrumentation within Qt.
Currently, only LTTNG/Linux and ETW/Windows are supported.
Change-Id: I59b48cf83acf5532a998bb493e6379e9177e14c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This removes the need to install an event filter on qApp just for this.
A similar thing was done with setPalette to reduce the number of event filters
in e.g. SystemPalette and Quick Controls.
[ChangeLog][QtGui][QGuiApplication] Added fontChanged signal
Change-Id: Ifa843aa42b91ac63ab17c3b064ac0e764aac77d3
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Unconditionally apply window cursors restoreOverrideCursor() also for
platforms with override cursor capability in case
a cursor was changed while the override cursor was active.
Amends b05d1c2ebf.
Task-number: QTBUG-65001
Change-Id: I7fd38a27dcf045f2fb48a16abb484342feaab5df
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Adds support for FileChooser Flatpak portal. To support them we just do
specific DBus calls, which are then caught and forwarded by xdg-desktop-
portal daemon/service. This is needed for Qt applications running in
sandbox.
[ChangeLog][Platform Specific Changes][Linux] Added support for flatpak
portals. Flatpak is a software utility for software deployment and
package management. It provides a sandbox environment in which users
can run applications in isolation from the rest of the system. To
communicate with the system flatpak uses portals, which are designed to
be a bridge between sandboxed applications and desktop/system running on
user's computer. Flatpak runs this service (called xdg-desktop-portal)
automatically. It exports the portals via DBus and they are visible by
default to all applications running under Flatpak.
Change-Id: I4de1402434ba7cbcc805eab51c30f84f8ba0c5c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is one of the most frequent problems users ask for help with, and they
don't even know if the plugin was found but not loaded or simply not found.
Qt knows what happened, so communicate it to the user.
Change-Id: I6003ed4ab3d147a5d159b2002004e53c251cb512
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The safe area margins of a window represent the area that is safe to
place content within, without intersecting areas of the screen where
system UI is placed, or where a screen bezel may cover the content.
QWidget will incorporate the safe area margins into its contents margins,
so that they are are never smaller than the safe area margins. This can be
disabled by unsetting the Qt::WA_ContentsMarginsRespectsSafeArea widget
attribute, which is set by default.
QLayouts will automatically use the contents area of a widget for their
layout, unless the Qt::WA_LayoutOnEntireRect attribute has been set. This
can be used, along with a contents margin of 0 on the actual layout,
to allow e.g. a background image to underlay the status bar and other
system areas on an iOS device, while still allowing child widgets of
that background to be inset based on the safe area.
[ChangeLog][iOS/tvOS] Qt will now take the safe area margins of the
device into account when computing layouts for QtWidgets.
Change-Id: Ife3827ab663f0625c1451e75b14fb8eeffb00754
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Check for QWindowPrivate::blockedByModalWindow in
QGuiApplicationPrivate::processDrag().
Task-number: QTBUG-46287
Change-Id: I8f43de8389f34458f9e10b37b94806b47a50d40a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
All the required data is just there, few lines above. Instead of
throwing it away and then deducing again in mouse event handler,
use the enhanced mouse constructor.
Tablet event handler was the last remaining user of the obsolete
mouse event constructor. This patch removes the now unused construtor.
Change-Id: I0df7f1b82f0e768f651aa7fbe2d4efce93e992fa
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The documentation for AA_SynthesizeMouseForUnhandledTouchEvents states:
"All touch events that are not accepted by the application will be
translated to left button mouse events instead."
This is exactly what this patch does. With the enhanced mouse event,
we can simply pass event details as necessary. This should not conflict
with the code doing its own mouse synthesis (as long as custom event
handler accepts QEvent::Touch{Begin,Update,End}).
What was wrong with the previous implementation:
It was sharing the same state variable (mouse_buttons) to deduce button
state/type on physical mouse and emulated mouse. This was wrong, you
can't track state of two input devices by sharing one variable. Moreover,
this variable is intended for tracking state of a hardware mouse only.
Button state on physical mouse (as a separate pointer device) is
irrelevant for touch input (which is another "pointer device"). The
current API does not support multiple pointer devices, thus button state
on one pointer device should not affect state on other pointer device.
Task-number: QTBUG-57465
Task-number: QTBUG-52102
Change-Id: Id45d815508918b4e52319baddb2c9564d52ad783
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
... and deprecate QWSI APIs that accepts mouse event without mouse button/
type data.
In the early days of Qt5 it was decided to centralize mouse button/type
handling in QGuiApplication (because of limitation of some now unknown
platform). This has proven to be problematic as mouse handling details
differ across platforms (e.g on X11 we do not receive mouse release event
when closing popup windows or ordinary windows that are closed from the
mouse press event). Instead of hacking around platform specific behaviors
in Qt Gui, we should move this task back to platform plugins (similar to
how this was done in Qt4 with native APIs sending mouse details directly
to QApplication). There are even cases where it simply is not possible
to deduce (from QGuiApplication) which button caused the event (e.g. when
more than one button is involved and some event goes missing). Besisdes,
throwing away information which is already available at QPA level (for free)
and trying to deduce it again at Qt Gui level seems impractical, fagile
(as probably noticed by people fixing all the unexpected issues) and adds
unnecessary complexity.
Note:
Removing the deprecated QWSI APIs from offscreen plugin depends on fixing
autotests that rely on QOffscreenCursor::setPos() logic.
For the convenience of testing use QT_QPA_DISABLE_ENHANCED_MOUSE to restore
to the old code path where QGuiApplication does the mouse state deducing.
Other platforms have similar issues. I do not have all supported platform
available on my desk, so other platform maintainers will need to take care
of porting those platforms to the new APIs. And mainly, I don't want to deal
with all the hacks that other platforms have added to workaround this broken
mouse logic.
In Qt6 we need to remove deprecated code path from QGuiApplication.
This patch:
- Extends QWindowSystemInterfacePrivate::MouseEvent ctor with QEvent::Type
and Qt::MouseButton. We use this extra data when processing mouse events in
QGuiApplication. This actually is similar to KeyEvent, where we do pass the
type (press or release) to QtGui.
- Refactors QGuiApplicationPrivate::processMouseEvent and qtestlib to use
the new APIs.
Task-number: QTBUG-59277
Task-number: QTBUG-62329
Task-number: QTBUG-63467
Change-Id: If94fd46a7cccfea8264dcb1368804c73334558b8
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Non client area mouse events are mouse events too. There is no need
for a dedicated event type in QWindowSystemInterface.
Instead we pass the state through a 'nonClientArea' variable of the
mouse event, corresponding to QEvent::NonClientArea{Press,Release,Move}.
Change-Id: Ia0a188400787506c8fe0cfe58aee0776c1ab13c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QtQuick is beginning to have a use for this, to distinguish native
gestures which come from actual trackpad rather than from the "core pointer".
It might as well use a real device ID instead of making one up,
as it has to do for the core pointer.
So far on macOS, the device ID isn't a real one; but that can be fixed,
as the qCDebug lines demonstrate (different trackpads have different IDs).
Change-Id: I5841deb1c4cc0b77a3b1df70904f70b3d2d71853
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtGui] It's now possible to retrieve the screen
at a given point via QGuiApplication::screenAt().
Change-Id: Ic09514ec731d8cce5d453833e98fcd118a70600e
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
Adds QColorSpace and QColorTransform classes,
and parsing of a common subset of ICC profiles
found in images, and also parses the ICC profiles
in PNG and JPEGs.
For backwards compatibility no automatic color
handling is done by this patch.
[ChangeLog][QtGui] A QColorSpace class has been added,
and color spaces are now parsed from PNG and JPEG images.
No automatic color space conversion is done however, and
applications must request it.
Change-Id: Ic09935f84640a716467fa3a9ed1e73c02daf3675
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The logic of deciding whether or not to send resize and move events
has been centralized in QGuiApplication. This ensures that if a
window with geometry 100,100+200x200 is moved and resized to e.g.
0,0+100x100, but the window manager denies the request (because the
window would e.g. overlap with system UI), and issues a geometry
update with the original geometry, 100,100+200x200, we will still
treat that as warrant of a move/resize event to the application,
so the application knows that its position and size is as before.
[ChangeLog][Qt Gui][QPA] QWindowSystemInterfacePrivate::handleGeometryChange
no longer takes the old geometry as an argument.
Task-number: QTBUG-57608
Change-Id: I1d471cc7a257fef958bdb1e56184fa95489403a3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QPA is modeled on the assumption that the cursor is a property
of the window and therefore sets the override cursors on all windows.
However, on macOS and Windows, the cursor is set per application (or
screen). On these platforms, the per window cursor setting needs
to be emulated which is a source of bugs especially for override
cursors.
Add new virtuals to QPlatformCursor allowing to set override
cursors which can be implemented by directly setting the cursor
on those platforms.
Task-number: QTBUG-40122
Task-number: QTBUG-61133
Change-Id: I31d6a927128d22bb1620a8ace35988c0e126236e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Running:
tst_qapplication focusMouseClick touchEventPropagation
produced:
FAIL! : tst_QApplication::touchEventPropagation() 'window.seenMouseEvent' returned FALSE. ()
since QGuiApplicationPrivate::mouse_buttons was not cleared
when destroying and re-instantiating QGuiApplication.
Add more initialization and clear screen list on exit.
Change-Id: I0d814852c362d4a86f1ff5d6a94ab00d32ed30b9
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This variable was introducing during Qt 5.0 Q{Gui}Application
refactoring days (2011 or even before) and since then has been
used interchangeably with QGuiApplicationPrivate::mouse_buttons.
This patch removes the duplicate member variable as it is
redundant and could be a source of potential errors.
Initially I was thinking that ::buttons might be used for
the purpose of QTestLib, but it is not. QTestLib delivers
mouse events directly via qApp->notify() (mouse button state
is update via QGuiApplicationPrivate::mouse_buttons from notify()),
or via window system interface QWindowSystemInterface::handleMouseEvent
(which goes through QGuiApplication::processMouseEvent).
Looking at QGuiApplication, it is clear that ::buttons
and ::mouse_buttons always have the same value, as there
is only one assignment to these members in QGuiApplication:
mouse_buttons = buttons = e->buttons;
And there are no other places that would assign to
QGuiApplicationPrivate::buttons.
Change-Id: Ib60d366bf056a98b15bb4538a569693e7bd022e2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
So that any objects autoreleased during application initialization are
released. Otherwise they will end up in the root level pool and only
be released when the application exits and the application goes out
of scope.
Change-Id: If02d24fd70098f9b4b1b0ea3218e0a15e438b9db
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add simple Win32-API based menus (not owner-drawn).
Native menus are implemented using Win32 API and are simpler than
QMenu-based menus in for example that they do allow for placing widgets on
them or changing properties like fonts and do not provide hover signals.
They are mainly intended for Qt Quick. By default, they will be used if the
application is not an instance of QApplication or for Qt Quick Controls
2 applications.
In addition, the command line option -platform windows:menus=native
will unconditionally activate them and -platform windows:menus=no
turns them off.
[ChangeLog][QtGui][Windows] Native menus have been implemented.
Task-number: QTBUG-55967
Change-Id: I439a7d949745debea3eb0e5789cf42288a0d526f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Don't quit on Back key release when Back shortcut was accepted and
likewise for the Menu key, don't trigger the platform menubar if Menu
shortcut was accepted.
Change-Id: Ifde87cbc2d95be1beb90ca59f55889b83a90ff02
Task-number: QTBUG-59670
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The code compared a QString* with a QString, which only compiled
because the QStringRef(const QString*) ctor was implicit. We're going
to fix that, and it's nice to see that the change exposes bugs like
this one.
The fix is to deref the QString* argument, which we know from previous
checks to be non-nullptr, to enable normal QString/QString comparison.
Change-Id: Idc7b214cb26e8b7c18ee1ba0a2b7236f814f0810
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The previous logic relied on QPlatformWindow::setWindowState() being
synchronous and delivering the QPA event before returning to QWindow,
in which case window->windowState() would still refer to the old
state. Async platforms can now report the previous state correctly.
Change-Id: Ib9148fe23fb62be55b7e3a0ccf63d32c71dc2ad3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The comment says "don't send event if nothing changed", but the
condition it is attached to reads if (velocityOnly), which is
totally opaque.
Change the variable name to stationaryTouchPointChangedVelocity
and drop the then-branch of the if, because it is duplicated in
the following default case of the switch.
The comment makes sense again, and GCC 7 is happy, too, because
this whole issue was pointed out by its -Wimplicit-fallthrough,
which is why I added the fall-through attribute, too.
Change-Id: I0631a381095f8897c55d9440304f6aefbc021a9a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Change 333f641622 modified
QGuiApplication::topLevelWindows() to no longer include embedded windows.
This causes the blocked handling in Active Qt to no longer be triggered.
Fix this by iterating over the list using the same condition as before,
avoiding the construction of a temporary list as a side effect.
Task-number: QTBUG-18099
Change-Id: I06a1a4e324fea9f543ceb5274bb064734f8d56af
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Don't block the event that Qt depends on to close popups.
This is the same fix as 5b65698248,
but for touch this time.
Task-number: QTBUG-57292
Change-Id: I47bc19883c2e2b5dc9615c12dc6c198193c055cf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It makes assignment a bit more succinct and efficient since they
are usually set together.
Since we store the diameters and the points separately, we
no longer need to worry about updating rects by moving their centers.
QGuiApplication and QApplication don't need to alter the diameters:
they are set once when the event is constructed.
Also fix the initialization of pressure and rotation:
418b6f6899 did it by casting a
double to qreal, whereas a plain integer constant will be
auto-converted by the compiler anyway.
Change-Id: Ib9956d2def21278b8ae042147d917da156e77e52
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
It was very confusing to debug a problem involving detached touchpoints
and not very clear how startPos is stored in activeTouchPoints.
Change-Id: I5c04fb6b5647493a731774e0a1765404cbc8c7d6
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The contact patch of a finger on a touchscreen tends to be roughly
elliptical. If we model it as a QRectF, it's not clear whether the
ellipse should be considered to be inscribed in the rectangle and then
rotated, or whether the rectangle represents the outer bounds of the
rotated ellipse. In practice, since most touchscreens can't measure
rotation, it is effectively the latter. But modeling it that way means
information is lost if the touchscreen can measure rotation: you can
determine the bounds of a rotated ellipse, but you cannot derive the
rotated ellipse from its bounds. So it's better to model the axes
of the ellipse explicitly. This has the added benefit of saving a
little storage space: we replace 3 QRectF instances, whose width
and height will normally be the same, with 3 positions (bringing the
total to 12 QPointF's) and one set of axes. Further, most applications
only care about the center of each contact patch, so it's better to
store that explicitly instead of calculating QRectF::center() repeatedly.
In the past there may have been an assumption that the width of the rect is
the same as the horizontalDiameter of the ellipse, so the rect could be
considered to be rotated, and the ellipse to be inscribed. But in
d0b1c646b4 and
40e4949674 the point was made that the rect
is actually the bounding box of the rotated ellipse.
[ChangeLog][QtGui][QTouchEvent] TouchPoint::rect(), sceneRect() and
screenRect() are deprecated; a touchpoint is now modeled as an ellipse,
so please use pos(), scenePos(), screenPos(), horizontalDiameter()
and verticalDiameter() instead.
Change-Id: Ic06f6165e2d90fc9d4cc19cf4938d4faf5766bb4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
“tlw” suggests that the API accepts top-level QWindows
only, which is not the case. Use “window” instead.
Change-Id: I9f58c638c33b33c3333c52a3cf291f311d799fe2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't block the event that Qt depends on to close popups.
Task-number: QTBUG-57292
Change-Id: Ida1f928b81868f68a7b1e19cd0b83485d2a7232e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Turns the two set of tables in QDrawHelperGammaTables into two
QColorProfile classes that use similar structures and can be reused for
other gamma correction.
At the same time clean-up and improve the comma-correct blending code
to use the new profiles and QRgba64 precision.
Change-Id: I302bd87a5c836e1010fff6d633eeb56fd4ae2ff0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Unifies the three conditions where we do not treat a window as a
top level window.
Uses QWindow::isTopLevel() instead of manually checking parent.
Updated the comment about embedded windows, which applies to all
embedded windows, not just QAxServers windows.
Change-Id: I7f9dbdf50044bf375ca21818ac29fbd3fe502166
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is second attempt of change cd26e66c2e
This allows us to not have conflicts between the point ids between
different devices for QtQuick pointer handlers.
We do this in QtGui because we can then safely compare point ids from
QTouchEvent::TouchPoint and QQuickEventPoint.
(Point ids that QtQuick pointer handlers use will be based on the point
ids provided by QTouchEvent::TouchPoint::id)
[ChangeLog][QtGui][QTouchEvent][Important Behavior Changes]
Touch point ids are now unique even between different devices. As a
consequence of that, you cannot anymore assume that
QTouchEvent::TouchPoint::id has the same value as given by the native
platform nor the same value as given by synthesized touch points.
Change-Id: Iad2fd8c6a43ccc571a227a01134a1e8f829dfaf4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The patch is good, but currently breaks touchmouse test in qtdeclarative.
We need to fix the touchmouse test first, then go ahead and reapply this
patch once qtdeclarative is fixed.
This reverts commit cd26e66c2e.
Change-Id: I222e6240f5ff0eff9c8a3544819499847f6b48fa
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This allows us to not have conflicts between the point ids between
different devices for QtQuick pointer handlers.
We do this in QtGui because we can then safely compare point ids from
QTouchEvent::TouchPoint and QQuickEventPoint.
(Point ids that QtQuick pointer handlers use will be based on the point
ids provided by QTouchEvent::TouchPoint::id)
Change-Id: I8b9ab0d44224b15175b820d33cbb2d8bd21e99f2
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The default should be false, meaning the application will prefer to
use a native menubar if the platform supports it. The application
author can set it to true if he wants to always use a Qt-rendered
menubar instead; or, he can call QMenuBar::setNativeMenuBar().
Qt and its plugins should not override the author's wishes.
Instead, if the platform plugin cannot create a native menubar
for whatever reason, createPlatformMenuBar() will return null,
and QMenuBar will fall back to using a Qt menubar instead.
The application can check the result via QMenuBar::isNativeMenuBar().
QMdiArea when maximized inside a QMainWindow with an empty title
does not replace the main window's title if we are using native menus.
This behavior turned out to be the same on Unity as it is on macOS,
so the autotest needed adjustment to expect that behavior whenever
the menubar is native, not only on certain platforms.
tst_QMenuBar::allowActiveAndDisabled() tests a standalone QMenuBar.
In f92f78094 it was disabled on macOS, but on Ubuntu it passes as
long as we force it to be a non-native menubar, so it should pass
that way on macOS too. Removed unused variable RESET to fix warning.
Task-number: QTBUG-54793
Change-Id: I716e40da709f96331cbbf25213bd7bc153e4dbe2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The former is easy to mistake for the isExposed state of the event.
Change-Id: Ic769ac332901ac97449ebc8dcca5959b6b42df68
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
sync() is unconditionally declared in the QGuiApplication header, but
the definition was under QT_NO_SESSIONMANAGER guards.
This commit moves the definition of sync() outside of
the QT_NO_SESSIONMANAGER guards, since the sync code has nothing to do
with session management.
[ChangeLog][QtGui][QGuiApplication] Fixed a bug that would cause
QGuiApplication::sync() to be left undefined for Qt builds without
session management support.
Change-Id: Ieb46f7c90c9193e89469126170117d9df672f4cb
Task-number: QTBUG-51703
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a palette is set on the application object and the user does
something to trigger a theme change, i.e. connects via remote desktop
or logs out and in again, then it will cause Qt to render incorrectly.
Therefore we should only update the palette from the new theme if we
don't have our own already set.
Task-number: QTBUG-52962
Change-Id: I4e2288efd82ad98b698cc09f26ad188064ec7b2a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If applicationDisplayName has not been set, the signal is emitted when
applicationNameChanged() is emitted.
[ChangeLog][QtGui][General] Add
QGuiApplication::applicationDisplayNameChanged() signal.
Task-number: QTBUG-53076
Change-Id: I18494ad90bd8dec3f79ef5175a3a85e776560fd0
Reviewed-by: David Faure <david.faure@kdab.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The printf-style version of QDebug expands to a lot less code than the
std::ostream-style version. Of course, you pay in type safety (but
compilers warn about it these days), you cannot stream complex Qt
types and streaming QStrings is awkward, but in many cases you
actually improve on readability.
But the main reason is that something that's not supposed to be
executed under normal operation has no business bloating executable
code size.
This is not an attempt at converting all qWarnings() to printf-style,
only the low-hanging fruit.
In this second part, replace
qWarning() << "" << non-QString
with
qWarning("..%.", non-QString).
QString (and QUrl etc) have special escaping handling when streamed
into QDebug, so leave those alone. They also seem to expand to less
code than the qPrintable() alternative, so there's no reason to
replace them.
Saves 2KiB, 3.4KiB, ~750b and ~450b in text size in QtCore, Gui,
Network and Widgets, resp., on optimized GCC 5.3 AMD64 builds.
Change-Id: Iae6823e543544347e628ca1060d6d51e3b04d3f4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QtQuick Controls 2.0 is going to have capitalized style names (Material,
Universal, ...) so move the toLower() call to QApplication where widgets
make use of styleOverride.
Change-Id: I5a8c5ee38517690728f5f8f01024d4e692c81668
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
When using TUIO, and the finger or token comes to a stop, the last
event has a stationary touchpoint with zero velocity, but the previous
event had movement, with non-zero velocity. If the UI is going to
do something with the velocity values, it needs to know when that goes
to zero. So this is an exception to the rule that we don't deliver
stationary touchpoints.
Task-number: QTBUG-52510
Change-Id: Iaa9f72a3749130f6806f2f63512a6ffddca06bce
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
It's urgent to fix the issue that on Android, it became impossible
to interact with any widget or MouseArea which handles only mouse
events but not tablet events, using the stylus, because stylus events
are sent only as QTabletEvents. Before 5.6 (change
01d78ba86a) they were sent as
touch events, and mouse events were synthesized from those. Whereas
on other platforms, every QTabletEvent is followed by a synthesized
QMouseEvent.
This fix proceeds in the direction that event synthesis should be done
in cross-platform code so that platform plugins don't have to repeat it,
following the same pattern as for touch->mouse synthesis. Just as
in that case, the application can disable it, and the platform plugin
can also report that it's unnecessary for Qt to do the synthesis
because the platform already does.
So QTBUG-51618 is fixed, but QTBUG-47007 requires us to remove the
tablet->mouse synthesis from all platform plugins, because the plugin
does not know whether the tablet event was accepted or not, so it does
not have enough information to decide whether to synthesize a mouse
event. Synthesis has been unconditional until now, which contradicts
what the documentation says: the mouse event should be sent only if
the tablet event is NOT accepted. We can now gradually make this
promise come true.
[ChangeLog][QtCore][Tablet support] A synthetic mouse event will
no longer be sent after every QTabletEvent, only after those which are
not accepted (as documented).
Task-number: QTBUG-47007
Task-number: QTBUG-51618
Change-Id: I99404e0c2b39bbca4377be6fd48e0c6b20338466
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
TUIO supports tracking tagged physical objects on touchscreens by
various means (QR codes, RFIDs etc.) It can detect both position
and rotation. Likewise, it may be possible for some touchscreens or
drivers to detect orientation of the fingers. So, just as QTabletEvent
has rotation, each touchpoint needs to include the rotation value.
When using tokens, each object has a permanent unique ID, whereas
QTouchEvent::TouchPoint::id() is a transient ID which usually auto-
increments each time a finger is pressed to the device. So we need to
make that available too, to identify each token. Different platforms
may use different kinds of IDs (int, UUID, QR code etc.); however for
TUIO 1.x, the unique IDs are just 32-bit integers. QPointerUniqueId
is added, storing only a qint64 for now (like QTabletEvent::uniqueId())
but able to be expanded as necessary later on.
Task-number: QTBUG-51844
Change-Id: I04182042f47fa2954728079139a4664a31184b54
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
and tests.
Task-number: QTBUG-51673
Change-Id: I55f61845c3b54027c467a5c59c122e7d16955358
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts d5fde51410 and makes
that enum value the default for QWheelEvent::phase() with non
phase-aware mice.
[ChangeLog][QtGui] QWheelEvent::phase() returns NoScrollPhase with
non phase-aware mice. This is most mice and input devices except,
for now, Apple's trackpads and Magic Mouse.
Change-Id: I929fb39889cf116e89dcd134c1b1ec6587b8f05e
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
As reported by ubsan:
src/gui/kernel/qplatformintegration.cpp:463:10: runtime error: downcast of address 0x7ffdc2942490 which does not point to an object of type 'QGuiApplication'
0x7ffdc2942490: note: object is of type 'QCoreApplication'
src/gui/kernel/qplatformintegration.cpp:466:14: runtime error: downcast of address 0x7ffdc2942490 which does not point to an object of type 'QGuiApplication'
0x7ffdc2942490: note: object is of type 'QCoreApplication'
src/gui/kernel/qplatformintegration.cpp:466:43: runtime error: member call on address 0x7ffdc2942490 which does not point to an object of type 'QGuiApplication'
0x7ffdc2942490: note: object is of type 'QCoreApplication'
to name just a few which are reported when running gui and widget
auto-tests; there're definitely more where these came from.
This is caused by QCoreApplication::init() being called from the
QCoreApplication ctor, calling virtual functions on Q*AppPrivate,
which happen to attempt, in this case, to emit QGuiApp signals.
At that point in time, the QGuiApplication ctor has not entered
the constructor body, ergo the object is still a QCoreApplication,
and calling the signal, as a member function on the derived class,
invokes UB.
Fix by cleaning up the wild mix of initialization functions used in
this hierarchy. The cleanup restores the
1. Q*ApplicationPrivate::Q*ApplicationPrivate()
2. Q*ApplicationPrivate::init(), calling each base class'
init() as the first thing
two-stage construction pattern commonly used elsewhere in Qt to make
sure that the public class' object is fully constructed by the time
each level's Private::init() is called.
Change-Id: I290402b3232315d7ed687c97e740bfbdbd3ecd1a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Some consumers of wheel events need to know if the
scrolling direction is inverted in order to provide
consistent behavior.
For example, the scrolling direction of a horizontal
slider should not change when the user toggles the
"natural scrolling" setting on OS X. In this case
the inverted bit will change state and the slider
can compensate.
This change adds a bit to QWheelEvent and sets it
on OS X.
Task-number: QTBUG-35972
Change-Id: I221435dea45d436d570b113bd0e24ee6f6832211
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
The fix for QTBUG-50199 involves adding an undocumented enum value
which can be returned from QWheelEvent::phase(). This will be quite
unexpected for applications that use it, which work fine with 5.6.0
and then start receiving this new phase value in 5.6.1. So it should
not happen by default. Set the env variable
QT_ENABLE_MOUSE_WHEEL_TRACKING to enable this functionality.
In 5.7 it will be default behavior. But in 5.6 the default
behavior is as it was before: if you use a conventional mouse wheel,
the phase stays at ScrollUpdate continuously.
[ChangeLog][QtCore] QWheelEvent::phase() returns 0 rather than
Qt::ScrollUpdate when the wheel event comes from an actual
non-emulated mouse wheel and the environment variable
QT_ENABLE_MOUSE_WHEEL_TRACKING is set. In Qt 5.6, this is required
to enable the fix for QTBUG-50199.
Change-Id: Ieb2152ff767df24c42730d201235d1225aaec832
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The printf-style version of QDebug expands to a lot less code than the
std::ostream-style version. Of course, you pay in type safety (but
compilers warn about it these days), you cannot stream complex Qt
types and streaming QStrings is awkward, but in many cases you
actually improve on readability.
But the main reason is that something that's not supposed to be
executed under normal operation has no business bloating executable
code size.
This is not an attempt at converting all qWarnings() to printf-style,
only the low-hanging fruit.
In this first part, replace
qWarning() << "...";
with
qWarning("...");
In QTransform shared warning strings.
Saves 3KiB in text size on optimized GCC 5.3 AMD64 builds.
Change-Id: I142a8020eaab043d78465178192f2c8c6d1cc4f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
That feature is a poor man's session management for applications
that do not implement any specific session management features.
It badly interferes with proper session management support, so
applications must be able to disable it.
This enables fixing applications with
QGuiApplication::quitOnLastWindowClosed() true - the default -
dying too early, before they are enumerated for the list of
applications to restart on session restore, thus preventing them
from being restored. See
https://bugs.kde.org/show_bug.cgi?id=354724
[ChangeLog][QtGui] Qt asking to close windows on session exit as
a fallback session management mechanism has been made optional.
Disabling it fixes session management for applications that
implement full session management. See
QGuiApplication::isFallbackSessionManagementEnabled().
Task-number: QTBUG-49667
Change-Id: Ib22e58c9c64351dea8b7e2a74db91d26dd7ab7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Eskil Abrahamsen Blomfeldt
Qt Forward Merge Bot
Friedemann Kleint
Tor Arne Vestbø
Liang Qi
Morten Johan Sørvig
Allan Sandfeld Jensen
Lorn Potter
Shawn Rutledge
Simon Hausmann
Marc Mutz
Alexandru Croitor
Leander Beernaert
Mikhail Svetkin
Alexander Volkov
Milian Wolff
Christian Ehrlicher
Gatis Paeglis
Alessandro Portale
Timur Pocheptsov
Steve Mokris
Sergio Martins
David Faure
Andy Shaw
Jan Grulich
Giuseppe D'Angelo
Johan Klokkhammer Helsing
Joerg Bornemann
Jarek Kobus
Rafael Roquetto
Otto Ryynänen
Kai Uwe Broulik
Lars Knoll
Kevin Funk
Stephan Binner
J-P Nurmi
Ulf Hermann
Maurice Kalinowski
Paul Olav Tvete
Jan Arve Saether
Albert Astals Cid
Shawn Rutledge
Topi Reinio
Edward Welbourne
Olivier Blin
Anton Kudryavtsev
Benjamin Terrier
Mike Krus
J-P Nurmi
Liang Qi
Shawn Rutledge
Friedemann Kleint
Eirik Aavitsland
Gabriel de Dietrich
Frederik Gladhorn
Oswald Buddenhagen
Morten Johan Sørvig
Andreas Hartmetz