* Use qAddOverflow/qSubOverflow methods for catching additions and
subtractions with overflow and handle these scenarios when reading the
file.
* Add 'safeView' method that checks that the byte array view constructed
is not out of bounds.
* Return error if number of levels is higher than what is reasonable.
* Return error if number of faces is incorrect.
* Add unit test with invalid KTX file previously causing a segmentation
fault.
This fixes CVE-2024-25580.
Fixes: QTBUG-121918
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: Ie0824c32a5921de30cf07c1fc1b49a084e6d07b2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QAIV::rowsAboutToBeRemoved() closed all child editors when the child was
a direct ancestor of the removed index but forgot to check if the index
is an indirect ancestor. Some of those editors were removed later in
updateEditorGeometries() but not all as the testcase in the bug report
showed.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-103476
Change-Id: I90b3d3bff3857aa79f96eecf23d980928693b7bc
Reviewed-by: David Faure <david.faure@kdab.com>
We'll need this in more places, so centralize its definition in
qcompilerdetection.h.
Amends 595b4e1a9b.
Pick-to: 6.7 6.6 6.5
Change-Id: I87f84cb9ff3ad339c000604423295180176f5799
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Qt currently has custom implementation for Indic grapheme breaks.
QTBUG-121907 was created to evaluate whether it is better to use
Unicode implementation instead.
Remove BLACKLIST. The remaining tests pass.
Fixes: QTBUG-121529
Task-number: QTBUG-121907
Change-Id: Ifd8fd76aeeba51d08c9f23b867abbf39750fc7d9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unicode 15.1 (more spcifically UTS #46, revision 31) changes how
host names are processed. The initial Unicode host name mapping
is done without validity checking. That check was used in the past
to mark QUrl's invalid. This patch inserts simplified validity
check later. This check is similar to one performed before
conversion to unicode, but does not include BiDi check to keep
names starting with xn-- valid.
Additional complication is that U+1E9E LATIN CAPITAL LETTER SHARP S
must be mapped to "ss" with transitional processing.
It is not possible anymore to predict whether Qt implementation
considers a URL valid by using only error codes in the tests
vectors file. The test was adjusted to expect an empty string
(indicating invalid QUrl) or string matching the entry in vectors
file if there are any processing errors specified for that entry.
Unblacklist tst_QUrlUts46::idnaTestV2.
Task-number: QTBUG-121529
Change-Id: Iad5dadd1a6695fa54b432e35000b350cd6e06341
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add enumerator for the new Unicode version to QChar::UnicodeVersion.
Remap new line breaking classes to their Unicode 15.0 values:
* AK, AP and AS to AL,
* VI and VF to CM.
These are classes for new line breaking support for Indic scripts
that require more work.
Blacklist failing tests for now:
* tst_QUrlUts46::idnaTestV2
* tst_QTextBoundaryFinder::lineBoundariesDefault
* tst_QTextBoundaryFinder::graphemeBoundariesDefault
Regenerate the source files.
Task-number: QTBUG-121529
Change-Id: I869cc9fbaa53765d8ae6265c22cdbef9f19d05bf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A standalone test is one that uses
find_package(Qt6BuildInternals REQUIRED COMPONENTS STANDALONE_TEST)
in its project code.
To ensure we don't accidentally regress this feature, test it as a
cmake test.
Also run test, this somewhat covers testing qt_internal_add_test.
Pick-to: 6.5 6.6 6.7
Change-Id: Ia9f27eef2bd7bd5bb57b96e553304924db252365
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
ICU returns a "valid" representation of GMT when given an unrecognised
ID, so QTZ's constructor has been checking the ID is available before
passing it to the backend constructor. That availability check was
done by generating the list of available IDs to see if the given ID
was in it; this is very inefficient. Furthermore, the QTZ constructor
was also checking availability, to work round the same issue in only
this one backend, making the check redundant.
So overide isTimeZoneIdAvailable() in the ICU backend, calling
ucal_getCanonicalTimeZoneID(), which answers the question directly;
and drop the duplicate check in the QTZ constructor. Expand a test to
verify an invalid name is rejected.
Fixes: QTBUG-121807
Pick-to: 6.7 6.6 6.5
Change-Id: I34f996b607b958d12607a94eb273bb1b406cca1a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To enable setting a default priority for all requests to a given site.
Fixes: QTBUG-121669
Change-Id: Icd8a9c59e4afb0432c65f84cc8115ae0c7f85506
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We cannot remove the overload using QT_REMOVED_SINCE, because a qint64
lvalue in the new overload will not bind to an uint& parameter, so the
old code would not compile.
Deprecate the old overload, and add a unit-test that makes sure that
it still behaves correctly.
This commit also introduces the new deprecation macros that are
required to do the deprecation in Qt 6.11.
Amends fd48ce0b73
Found in 6.7 API review
Pick-to: 6.7
Change-Id: I02893bfbe040df736f8e746384e0261a0f0041d3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Set this status when the stream tries to write more data than the
current serialization format supports.
Update the methods that write containers to return early if they fail
to write the container size, and do not try to serialize the elements.
Convert the manual tst_manualqdatastream test into a data-driven
test, allowing us to specify various stream versions. Adjust the test
code to check that the SizeLimitExceeded status is set when the
stream version is <= Qt_6_6.
Amends fd48ce0b73
Found in 6.7 API review
Pick-to: 6.7
Change-Id: If4c62ea53ac9bccd423f00f0f03afd6ba6bdc4f5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do that to avoid narrowing at the call site on 32-bit platforms.
Amends fd48ce0b73
Found in 6.7 API review
Pick-to: 6.7
Change-Id: I31142399385521d973b2ed3789745569e44d5d63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By wrapping the use of the timeout value in QTRY_IMPL in a lambda that
feeds the user input through the std::chrono::milliseconds constructor
with std::chrono_literals in-scope, the macros continue to work with
raw integral values as well as chrono literals not finer than
millisecond granularity.
Port all higher-level macros to pass a chrono literal and port some
uses in tst_selftests.
[ChangeLog][QtTest] The QTRY_*_WITH_TIMEOUT macros now also accept
chrono literals (was: int milliseconds).
Fixes: QTBUG-121746
Change-Id: Ib38406fc005a0a2c4ae3fd009760f73ad8bed355
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Using Selenium for WebAssembly testing enables us
to test user interactions, which is very valuable.
Turning this test into automated allows us to run
it in CI pipeline. This will help with detecting
regressions.
Two of these tests are currently failing on CI
machine and they have been temporarily disabled.
Change-Id: I754dd05955e55eb031070f5328ef715b7826c2b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When using a style sheet, Q(Plain)TextEdit::isReadOnly() might get
called during the initialization before d->control is properly
initialized which lead to a crash.
This amends 43ce457cbd.
Fixes: QTBUG-121697
Fixes: QTBUG-121790
Task-number: QTBUG-1857
Pick-to: 6.7 6.6.2 6.6 6.5 6.2
Change-Id: I15c357c9eef7f6559bcc2ad89033a3d8e7fcbfef
Reviewed-by: David Faure <david.faure@kdab.com>
This covers the following use case:
QtModuleX is pre-built and installed, it's imported. The plugin has
a PLUGIN_TYPE that is associated with QtModuleX and is built with
application that links QtModuleX. When deploying the application
it's expected that the plugin is deployed, as the one that belongs
to the linked QtModuleX.
This ensures that we udpate the internal _qt_plugins property that
is used in the __qt_internal_collect_plugin_targets_from_dependencies
function.
Pick-to: 6.5 6.6 6.7
Change-Id: I9824351ebab5a24509800da4db69f1e282a35884
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
1XX statuses are not final statuses, and testing 'error' on it is not
necessarily very meaningful. Furthermore the internal handling of
these statuses changes in Qt 6.8.
Fixes: QTBUG-108068
Pick-to: 6.7
Change-Id: I9c18c579cd310266273eccd2aee2e032f60538e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Make QNetworkAccessManager to discard all informational (1xx) replies
from HTTP servers with the exception of 101.
According to RFC 9110:
"A client MUST be able to parse one or more 1xx responses received
prior to a final response, even if the client does not expect one.
A user agent MAY ignore unexpected 1xx responses."
Status code 101 is an exception because we use it to upgrade to http2
cleartext when it is enabled.
Fixes: QTBUG-108068
Change-Id: I415ff053180a43f0c7ff1b4b2a60fd114ce08ac9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Instead of clearing a list repeatedly to then repopulate it by
appending entries.
Change-Id: I82594d69c1cb145defff43d84f92f8410d8997aa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't rely on timer precision and use int counter instead.
Amends 1fe88bf4cd
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: I057b4dd51014784ec9b244301b43583f3de6ddd1
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
As a baseline for subsequent commits.
Change-Id: Ifac026848e92817b08a75ceafee6d06e0a8f399d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to QUIP-18 [1], all tests file should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I9657df5d660820e56c96d511ea49d321c54682e8
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Commit c0791ac76e didn't explain why it
was #ifdef'ed out. It's just an alias for double. Maybe compilers at the
time used to complain if you used it, but I can't make Apple's clang
produce a warning now.
Pick-to: 6.7
Change-Id: I664b9f014ffc48cbb49bfffd17b02293403e9571
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When the main font is a fixed-width font, QTextMarkdownWriter generates
backticks around plain text; so QEXPECT_FAIL if we detect that.
tst_QTextMarkdownWriter::frontMatter() Compared values are not the same
Actual (output) : "---\nfoo\n---\n`bar`\n\n"
Expected ("---\nfoo\n---\nbar\n\n")
Also, include all test data as resources for platforms that need it
(such as Android).
Task-number: QTBUG-103484
Change-Id: If18ca493c402b128cdc0fb1910b2e822512af6e8
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It's increasingly common for YAML to be used as metadata in front of
markdown documents. md4c does not handle this, so we need to remove
it ahead of time, lest md4c misinterpret it as heading text or so.
The --- fences are expected to be consistent regardless of the format of
what's between them, and the yaml (or whatever) parser does not need to
see them. So we remove them while reading, and QTextMarkdownWriter
writes them around the front matter if there is any.
If your application needs to parse this "front matter", just call
qtd->metaInformation(QTextDocument::FrontMatter).toUtf8() and feed that
to some parser that you've linked in, such as yaml-cpp.
Since YAML is used with GitHub Docs, we consider this feature to be part
of the GitHub dialect:
https://docs.github.com/en/contributing/writing-for-github-docs/using-yaml-frontmatter
[ChangeLog][QtGui][Text] Markdown "front matter" (usually YAML) is now
extracted during parsing (GitHub dialect) and can be retrieved from
QTextDocument::metaInformation(FrontMatter). QTextMarkdownWriter also
writes front matter (if any) to the output.
Fixes: QTBUG-120722
Change-Id: I220ddcd2b94c99453853643516ca7a36bb2bcd6f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The DirectWrite font backend is an optional backend which
is planned to take over as the default on Windows. In order
to do this, though, a few gaps need to be filled in order
for it to pass all autotests.
The following things are covered by this:
1. Bitmap fonts are unsupported in DirectWrite. We enumerate
these using GDI and fall back to the GDI font engine when
loading them. As part of this, we introduce a new handle
type for fonts on Windows which can represent both
the DirectWrite and GDI engines.
2. "Legacy font names" where sub-family is embedded in the
family name is now enumerated together with the
typographic font name.
3. The DirectWrite font engine was not loading kerning pairs
from the font, like the other engines (omission which was
detected by the test)
4. Turning off antialiasing does not work with DirectWrite, so
we fall back to GDI for this.
5. Loading supported writing systems from application fonts
was not supported.
Task-number: QTBUG-119420
Change-Id: Icf6c351afb0d7487b2f4634199088d701a324aae
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since 3f4d6279c4b0d04422efff478a5e2fb36259dbaa (khansen 2005) QMovie
calls QImageReader::read() until QImageReader::canRead() returns false.
That's apparently to support animated image formats in which the
frame count is not known at the beginnning (i.e. not specified in
the image format's metadata). But non-animated multi-frame formats
are expected to return valid values from QImageReader::imageCount();
and those also tend to keep returning true from canRead() regardless
of how many frames have been read (the interpretation of canRead()
is "does the file have the expected format?" rather than "are we
about to read too many frames?"). So, when a multi-frame image is abused
as an animation, QMovie was able to keep reading the same frame
repeatedly and pretend that the frame sequence goes on forever.
It also tended to read frames as fast as they could be decoded,
because nextImageDelay() is not usually provided, because multi-frame
image formats don't specify a frame rate in their metadata.
So now we change QMovie's behavior for image formats where
QImageIOHandler::supportsOption(Animation) returns false:
trust imageCount(), but not do not trust nextImageDelay().
But to actually jump to the next frame in this case, we also need to
call QImageReader::jumpToNextImage().
Altogether, this makes QMovie support "flipbook" animation for
multi-frame image formats, such as tiff and pdf.
Added "read frame x of c" logging in qt.gui.imageio category.
For testing, we use a pre-existing multi-frame Obj_N2_Internal_Mem.ico
file, to avoid depending on the tiff plugin.
[ChangeLog][QtGui][QMovie] QMovie now handles non-animated multi-frame
image formats (such as tiff): QImageIOHandler::imageCount() is observed,
and the default frame rate is 1 FPS.
Pick-to: 6.5 6.6 6.7
Fixes: QTBUG-117429
Change-Id: I6dad2a684e12c78a68288402e223a59427bf649e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
2f6fe3a268 has made calls to
QApplicationPrivate::setActiveWindow() redundant.
Remove redundant calls.
Task-number: QTBUG-121488
Change-Id: I13ea8c0994eaeb764462af23ef66ea1a37659b77
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Qt 5 streams cannot handle QBitArrays with more than INT_MAX bits,
even on 64-bit platforms, because of interface constraints (size_type
int).
Qt 6 can, so make sure to refuse serialization of oversized QBitArrays
to Qt-5-compatible streams.
[ChangeLog][QtCore][QBitArray] Now refuses to stream a QBitArray with
size() > INT_MAX to a Qt-5-compatible QDataStream.
Pick-to: 6.7 6.6 6.5 6.2
Change-Id: I263e27bd366757c8e0360dfd337948c44d00647a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QCOMPARE() can report enum values by name just fine, no need to
laboriously convert them to strings. While comparing all tags in one
go did allow a more comprehensive report, it's enough to know we
failed; this is testing cross-platform code, so a debugger can tell us
all those extra details if we get a failure.
Testing qHash() doesn't distinguish equal things is fairly low value;
at least avoid duplicating the construction of the reference value.
Replace a bunch of other QVERIFY()s with the new cousins of QCOMPARE()
for ordered and different comparisons.
In the process, mark some of the QLocale objects as const.
Change-Id: Ic93b8ed60c6f2cc846fbba428983778896d61291
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
They were expanding as simple blocks, so their uses didn't end in
semicolon, which looks wrong when reading the code.
Pick-to: 6.7 6.6 6.5
Change-Id: Ibea7b01ac165045604b6eb7a838765b2061c368a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
(This turns out to be identical to v44, for our purposes.)
The CLDR license has been revised at v44 to "UNICODE LICENSE V3",
which is now included (as LICENSES/UNICODE-3.0.txt) in addition to the
old license (still in use, presumably, by UCD - at least until its
next update). Some new QLocale::Language entries are needed. There is
no change to the time-zone data.
Some tests needed changes:
* Various Arabic locales now use U+0623 (Arabic letter aleph with
hamza above) in exponent separator, replacing plain U+0627 (Arabic
letter aleph); it is still followed by U+0633 (Arabic letter seen).
* Where likely sub-tags used to fill in world, 001, as territory for a
language, they now (e.g. for Prussian and Yiddish) give specific
countries.
* Tamil locales now have something of a mix of inherited and localized
forms for AM/PM, which looks a lot like a mistake in CLDR.
* New likely sub-tag rules fix ctor(und_US) and ctor(und_GB), which
previously failed.
[ChangeLog][Third-Party Code] Updated QLocale's data extracted from
the Unicode Common Locale Data Repository (CLDR) to v44.1. The license
changed to Unicode License V3.
Pick-to: 6.7 6.6 6.5
Fixes: QTBUG-121485
Task-number: QTBUG-121325
Change-Id: Ide1a68016129526d7a5aa3fc67f1a674858696bc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The method takes a pointer, so the code shouldn't crash when passed a
nullptr.
QFileInfoGatherer::getInfo() still needs to generate a descriptive
string for the file, so we refactor QAbstractFileIconProvider::type()
to put the implementation into a reusable static function
QAbstractFileIconProviderPrivate::getFileType(const QFileInfo &info).
This unfortunately involves constructing a QMimeDatabase on the fly,
but the docs say that is fine.
Drive-by change: use nullptr instead of `0` for pointers.
Pick-to: 6.5 6.6 6.7
Fixes: QTBUG-99178
Change-Id: Ia32ea0a26701d593e74fbecced7be8d9e0aa0f52
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
installEventFilter() prepends new objects to the eventList, so that
events that are posted while processing events are left to the next
round of event processing.
This is a baseline test to check that subsequent commits preserve the
current behavior.
QCOMPARE_GT is available since Qt6.4, so make the check backportable to
older releases too.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Task-number: QTBUG-120779
Change-Id: I5ed5e9c2917a9be62de4af19c3b72889399b4fe6
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Upgrading emscripten to 3.1.50 breaks this test, so we disable the time
for time being. After emscripten update this test is to be enabled
and fixed.
Change-Id: Ic48d81e2285ed8f7639bf20c6c29b2b9e402a591
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As a result of using QWidget::setVisible to show the child widgets we
would end up also setting ExplicitShowHide. This is not in line with
the intent of ExplicitShowHide, which is to flag a widget as explicitly
shown/hidden by the developer, which in turn prevents Qt Widgets from
toggling WState_Hidden when the widget is reparented.
By using QWidgetPrivate::setVisible instead, we can show the child
without setting ExplicitShowHide.
As side effect of this is that we no longer reset WA_WState_Hidden
from QWidgetWindowPrivate::setVisible(). This is an issue when the
setVisible call comes as a result of destroying the QWidgetWindow,
as that is an implicit hide, and should not result in the widget
having WA_WState_Hidden. QWidget handles this case in hideChildren
by not calling QWidgetPrivate::setVisible -- instead doing its own
reset of WA_WState_Visible. We don't want to untangle this just yet,
so as a workaround we detect that the widget is already !isVisible(),
thanks to hideChildren having hidden it, and then skip the call
to QWidgetPrivate::setVisible that results from QWindow::destroy().
Task-number: QTBUG-121398
Pick-to: 6.7
Change-Id: Ib5b4d9c84f0569124c5f3ca2169cabff18934e2d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The nativeHiddenChild is not used for anything, and shouldn't be
needed to trigger the failure condition.
That said, I was not able to reproduce the test failure on macOS
14 with the test neither pre or post patch, nor with any of the
test cases mentioned in 51300566ff,
nor with 51300566ff itself, so this
has seemingly been fixed or worked around some other way in the
meantime.
Task-number: QTBUG-121398
Pick-to: 6.7
Change-Id: I299e7f4b71ebdb17870348a3d5b0c49a93228c8b
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
This is cleaner as the test dirs/files are created in a QTemporaryDir
that is cleaned up automatically, so less manual cleanup in the
unittest.
This also fixes issues for build environments where the source dir is
read-only.
entrylist dir in the source dir is only needed for the construction of
the QResource in the CMakeLists.txt.
Task-number: QTBUG-117449
Change-Id: I3e6389ff730c3a617854e85318f80838e012f2c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't call the native function directly, call the Java function that
calls the native function.
Pick-to: 6.7
Change-Id: Icdcf250313a38f6e4bc2b90fb7b0adbfa5a890fb
Reviewed-by: Juha Vuolle <juha.vuolle@qt.io>
Since 6.7 we consider the BUILD_SHARED_LIBS when creating libraries
using Qt CMake API. This change may affect the user projects that rely
on the old strategy of selecting the default library type. To preserve
the old behavior this change introduces the QTP0003 policy that allows
user to control whether the BUILD_SHARED_LIBS should or shouldn't be
considered in library creation process.
The policy doesn't affect Qt repos, we assume that we want the NEW
behavior by default.
Fixes: QTBUG-121707
Pick-to: 6.7
Change-Id: I4bcfbd8966839731624e3f7ef9e0d6bb2782ac50
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Amends 83e5d74864.
A model index returned by QFileSystemModel might become invalid when
events get processed, so don't store the result of setRootPath to re-use
it in a QTRY_COMPARE function. Instead, always ask for a fresh model
index.
Also, use std::chrono::duration::count correctly; it returns the "tick",
not the corresponding milliseconds, so (10s).count() returns 10 instead
of 10000. Explicitly use 10000ms here.
Un-blacklist the test on macOS again.
Task-number: QTBUG-74471
Pick-to: 6.7 6.6 6.5
Change-Id: Ic98bb53c696441131bbc1055b64822faf2aec96f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Since QVersionNumber doesn't have an existing way to modify individual
segments, provide only const_iterator.
[ChangeLog][QtCore][QVersionNumber] Added (const) iterators over
segments (begin()/end(), incl. c- and r- variants).
Change-Id: Ia9af70c2a9c59f630123894ad2c9f38031ef5b8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, a QBitArray could not contain more than INT_MAX bits, because
the then-size_type, int, cannot represent more, even if the underlying
storage could hold 8x as much, and the serialisation format, using
unsigned int, could represent 2x.
Therefore, reject old formats with sizes that exceed INT_MAX elements
as corrupt.
Likewise, the Qt 6 serialisation format unconditionally uses 64-bit
sizes, but 32-bit platforms still cannot represent more than
numeric_limits<qsizetype>::max() (= INT_MAX) bits in memory. This is a
valid stream for 64-bit platforms, though, so ideally, this should be
using SizeLimitsExeeded, which, however, is only available from Qt
6.7. So, for now, and until we have SizeLimitsExeeded, mark the stream
as corrupt here, too.
[ChangeLog][QtCore][QBitArray] Fixed undetected overflows in the
deserialisation (opertor>>()) from QDataStream.
Pick-to: 6.7 6.6 6.5 6.2 5.15
Change-Id: Ib24cf9218c06a3a05185723c77d4313611c2dd40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Match QCOMPARE logic when printing stringlists that don't match, it's
"actual" then "expected"
- Use row tag names that don't interfere with the shell; e.g. using
`tst_qdiriterator iterateResouce:':/testdata'` doesn't work for some
reason, so just add a qrc prefix
Change-Id: I3d556b83ec34f2dab15ea3178273af10fb2c62e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Jonas Karlsson
Christian Ehrlicher
Marc Mutz
Ievgenii Meshcheriakov
Alexandru Croitor
Nicolas Fella
Mårten Nordheim
Ivan Solovev
Piotr Wierciński
Alexey Edelev
Juha Vuolle
Mate Barany
Tasuku Suzuki
Edward Welbourne
Jarek Kobus
Ahmad Samir
Lucie Gérard
Thiago Macieira
Shawn Rutledge
Wladimir Leuschner
Eskil Abrahamsen Blomfeldt
Frédéric Lefebvre
Tor Arne Vestbø
Volker Hilsheimer
Krzysztof Sommerfeld