Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-53141
Change-Id: I73d8787241291ae6230861a89b38e91d900fede0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: I1972da2ead51274771ff24b4c506c2b581ee6abe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This makes an enormous difference in responsiveness on the iPad Pro:
it actually feels like real-time drawing with hardly any lag.
Change-Id: I17c3b948e818d4ee46b4d24934c929ab9b386e69
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There is no visible cursor on iOS, so updating the image is a waste
of time. Removing this does in fact speed up rendering of the strokes.
Change-Id: If958fabeefd4273644707277d4a084855d415bb1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It was backwards from the expected value, consistently on iOS and xcb.
It was already that way in 5.6, and we don't document which way
is clockwise. So it seems to be just the example which is wrong.
Change-Id: Ibbdadc2ae240017abc87439a2694fb5fbd3d07f8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Each stroke is a polygon (quadrilateral) connecting the previous
tablet event point to the current one. Previously we used the same
width for both ends of the stroke, so rapid changes in pressure caused
steps in the stroke width. Now it is tapered from one end to the other.
Change-Id: I909a2e85334a1a6e20fd28ee4babf6825da36612
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This adds the tabletTracking property in the same way that mouseTracking already
existed: there is a WA_TabletTracking attribute, and a TabletTrackingChange event
to notify when it changes. So for widget applications it's an opt-in feature.
QtQuick applications don't yet make use of tablet events, but when they do
in the future, we don't yet have a mechanism to turn the move events off;
it remains to be seen whether that will be necessary.
[ChangeLog][QtWidget] QWidget now has a tabletTracking property, analogous
to mouseTracking, which will enable TabletMove events while the stylus is
hovering, even if no button is pressed. This allows applications to show
feedback based on the other tablet event properties such as rotation and tilt.
Task-number: QTBUG-26116
Change-Id: Ie96e8acad882b167e967796cdd17f1ad747a2771
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Update the stylesheet example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: I7061b8fd462ff012cb67bfdade656b3bfe442dd8
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
We can use QOverload since Qt 5.7 (it depends on Q_COMPILER_VARIADIC_TEMPLATES
which is required since Qt 5.7).
Use it in the examples to show the best practice.
qOverload currently can't be used because it requires c++14.
Change-Id: I94a3c0db9d551fe169fa3d19c07ec0b329d5946c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
- Use Qt 5 connection syntax.
- Introduce helper function to calculate the square size, remove
the existing 24 pixel limitation since that makes it impossible
to render 20pt fonts.
- Add filter chooser for font filters.
- Add menu and info dialog showing DPI and default fonts.
- Streamline code
Change-Id: I0cd4d0475b5a7ed3c475de7a413abebbe688dfe2
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Examples should show idiomatic Qt, and QSignalBlocker is idiomatic
since it's inception in Qt 5.3. Just updating the examples was
forgotten.
This commit makes good for that.
Fix coding-style issues as a drive-by.
Change-Id: If138e87ea2ab7a444599734113f7cc6df11fb42d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
It's urgent to fix the issue that on Android, it became impossible
to interact with any widget or MouseArea which handles only mouse
events but not tablet events, using the stylus, because stylus events
are sent only as QTabletEvents. Before 5.6 (change
01d78ba86a) they were sent as
touch events, and mouse events were synthesized from those. Whereas
on other platforms, every QTabletEvent is followed by a synthesized
QMouseEvent.
This fix proceeds in the direction that event synthesis should be done
in cross-platform code so that platform plugins don't have to repeat it,
following the same pattern as for touch->mouse synthesis. Just as
in that case, the application can disable it, and the platform plugin
can also report that it's unnecessary for Qt to do the synthesis
because the platform already does.
So QTBUG-51618 is fixed, but QTBUG-47007 requires us to remove the
tablet->mouse synthesis from all platform plugins, because the plugin
does not know whether the tablet event was accepted or not, so it does
not have enough information to decide whether to synthesize a mouse
event. Synthesis has been unconditional until now, which contradicts
what the documentation says: the mouse event should be sent only if
the tablet event is NOT accepted. We can now gradually make this
promise come true.
[ChangeLog][QtCore][Tablet support] A synthetic mouse event will
no longer be sent after every QTabletEvent, only after those which are
not accepted (as documented).
Task-number: QTBUG-47007
Task-number: QTBUG-51618
Change-Id: I99404e0c2b39bbca4377be6fd48e0c6b20338466
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
- Introduce Qt 5 signal-slot connection syntax.
- Merge MainWindow::createMenus()/createActions()
into MainWindow::createMenus(), removing the need
to store the actions as member variables.
Use QMenu::addAction() for brevity.
- For actions in QActionGroups, carry the Valuator enum
in QAction::data so that the slot to handle the selection
does not need to compare the QAction pointer itself.
- Use a non-modal QColorDialog, so that the user
can change colors more easily while drawing.
- Choose saner shortcut keys: control-Q should not
override the default usage for quitting the application,
and using shortcuts for About dialogs is anyway dubious.
- Improve the example documentation.
Change-Id: I57aaf5f5b885c13a953482dbcc41275dd3d6bff4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Remove unneeded member variables.
- Use new connection syntax in createActions()
to assemble the menu there, removing the createMenus()
function.
- Use a QButtonGroup for the sizes with the style metrics as id.
- Streamline code, rename variables for clarity.
- Introduce static functions returning the list of states/modes and
their names in display order to IconPreviewArea, removing the
duplicates.
- Split actions to open sample icons provided from source directory
or standard pictures location to make sample icons more prominently
visible.
- Check and display @2x images and add tooltips showing device pixel
ratio and actual size.
- HighDPI: Add groupbox displaying screen name and device pixel
ratio, connect to screen changed signal and update icons panel
accordingly. Add check box for toggling Qt::AA_UseHighDpiPixmaps.
- Adjust documentation
Task-number: QTBUG-18680
Task-number: QTBUG-46615
Change-Id: Ice96e9898f168ef2a30e9f46cb260ed57ae015f0
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Add:
- Save As
- Copy
- Paste from clipboard into new image
Change-Id: Ibbc308e9bbd2ce407119cd9358874f5c22a6bb83
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
- Remove unneeded member variables.
- Use member initialization in the constructor.
- Use new connection syntax in createActions()
to assemble the menu there, removing the createMenus()
function.
- Fix coding style issue (braces)
- Avoid empty label showing up by setting the scroll
area invisible until an image is loaded.
- Set a new image only if image read succeeds.
- Add status bar with information message.
Task-number: QTBUG-46848
Change-Id: I32d5af70d8eb71ec16dd58a0b98c32eb2bd988d7
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The drawing is antialiased and with rounded caps and joins.
Rotation stylus acts like a felt marker.
Airbrush sprays a radial gradient of color, and its alpha can
depend on the tangential pressure if so chosen.
Task-number: QTBUG-46694
Change-Id: I4fb16eb621707e3c56a75aa302dd0d3bf418a745
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The DEPLOYMENT variable has been deprecated.
Change-Id: I1c7c07b36a2e665ae302e4f43f7f2dc752f3c1f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Liang Qi
Rainer Keller
Eskil Abrahamsen Blomfeldt
Shawn Rutledge
Thiago Macieira
Kevin Funk
Stephan Binner
Samuel Gaist
Alexander Volkov
Friedemann Kleint
Edward Welbourne
Marc Mutz
hjk
Liang Qi
Shawn Rutledge
Friedemann Kleint
Jani Heikkinen
Topi Reinio
Shawn Rutledge
Simon Hausmann
Friedemann Kleint
Oswald Buddenhagen
Joerg Bornemann