Building QtDBus on Linux host for QNX target had two issues:
* Configure check failed, because dbus-1 library was not linked in,
if target platform doesn't support pkg-config.
* Host tools were not built, because pkg-config was not used to locate
dbus headers on the host.
Task-number: QTBUG-37324
Change-Id: I71d8309599fd40ef2dd8c9e3b44b93a7482019f1
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-QML basic type page layout is now separate from the other
doc page layouts, but the section offset was incorrect.
-the offset is the same as the QML type pages.
Change-Id: I422e97eebe58a87c11607f2c8c5aedb10abbda7e
Task-number: QTBUG-40335
Reviewed-by: Martin Smith <martin.smith@digia.com>
-QDoc in 5.4 processed QML basic types as separate pages
but the ToC wasn't added.
Change-Id: I5a887158bacef923e765accac7ee5ca7c2c7a12b
Task-number: QTBUG-40335
Reviewed-by: Martin Smith <martin.smith@digia.com>
Replace QString::fromUtf8 with QString::fromLatin1 for ascii strings.
Also optimize use of QT_VERSION_STR.
Change-Id: I13c683499c56cb4ac4d2bbd9b6b53c337917e347
Reviewed-by: hjk <hjk121@nokiamail.com>
Check for existence of the paths added by 'indexes'
documentation configuration command, and generate
warnings accordingly. Also, ensure that the strings
added with 'depends' command contain no duplicates.
Change-Id: I66a3d1b25907567bb5bfc72b78a8009d7bd8e067
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Even though qdoc accepts the \value command(s) anywhere in the
documentation and generates tables for them, the produced output was
invalid for documentation topics other than \enum.
This change fixes the issue by not trying to resolve the enumeration
values and removing the 'Value' column for generated tables when the
\value command is used outside c++ enum documentation topic.
This enables, for example, the use of the \value command for
documenting acceptable values for QML enumeration properties,
without having to use custom lists or tables.
Task-number: QTBUG-35019
Change-Id: I597b2f9d7d03d4ab72f276752ddf53e1c405313c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
-QML basic types are lowercase-named while object types are uppercased.
-reference page for QML types should list both.
-caveat: simple implementation means the uppercase items are listed
first.
Change-Id: I9092ad0cd9e79c4d3f8b794ac5d68879ce6338a5
Reviewed-by: Martin Smith <martin.smith@digia.com>
This prevents conflicts in case of link time optimizations or
precompiled headers are used since we don't include qglobal.h
in the generated code.
Change-Id: I4266c8ae38e6eafefd28b3bde5cb725a24d67ea0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix an issue on Windows where
rcc -binary project.qrc >project.rcc
resulted in a corrupted file (\n was automatically replaced with \r\n).
This is caused by Qt using fwrite internally, which will automatically
replace linefeed with carriage-return for streams opened in text mode.
The fix forces stdout to binary mode in this case.
Task-number: QTBUG-39422
Change-Id: Ib5b5e82db922dc389d160b0115dbafe8641c95fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
-needed if a list of just QML basic types is needed.
-adding QML basic types to map of QML types.
-generating the list of "qmlbasictypes" also now supported.
-part of the fix for QTBUG-32871
Change-Id: Id291982a5684645b2b5e75256be673c1701e60b1
Task-number: QTBUG-32871
Reviewed-by: Martin Smith <martin.smith@digia.com>
Example pages' \brief do not form a complete sentence. The example
pages have proper introductions and descriptions, unlike API pages
which do use the brief information to summarize.
Change-Id: I11f1362cd05e3cf90ae8e1c3a07d2584737fd89c
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
At the moment, it's possible to have 2 properties with the same name,
which doesn't make much sense. Notify the user about that so she can
react on it.
Change-Id: I4865b71730921b79ce9dd8abb0cc760b3f1dbfd8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
-added "QML Type" for QML types
-reworded basic type pages by adding "QML Basic Type" at the end
-streamlined variables in QDoc related to the HTML and page titles.
These two changes were implemented in 5.3 branch, but got lost during
the merge into dev:
1243940f838e5e9d7987
This commit restores the changes while ammending similar fixes
Change-Id: I996b18f020b392aceeb40da7797838aca4a0626f
Reviewed-by: Martin Smith <martin.smith@digia.com>
This will simplify future maintenance of qdoc, adding options being
much easier with QCommandLineParser.
As always, this revealed a number of undocumented options:
-log-progress, debug, -autolink-errors.
Compared generated docs with and without the patch, looked fine,
except that order differs (the qt_qhash_seed thing doesn't work)
Based on initial patch by Laszlo Papp.
Change-Id: I3c851135f2fd573d622d2ed456a11cee34e06054
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
This macro is no longer used. It was introduced probably by mistake,
due to MSVC not following the strict string requirement of the C and
C++ standards by default (you can assign a string literal to a
non-const char*).
Change-Id: I4b221dd435191b0eea689dbed35915cf3206648b
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
url is set in qtbase/doc/global which is inherited by the
Qt 5 module qdocconf files.
Change-Id: Ieffa174f598f4a3b8ce8be9bfae7ca9b6981f12b
Reviewed-by: Martin Smith <martin.smith@digia.com>
An attempt was made to write an XML attribute after the
atart tag had been closed. This has been fixed by moving
some code around.
Change-Id: I279d91c345f4217dab8fc47faabe3350258d9ece
Task-number: Qt QTBUG-40039
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
This happens if the second pass failed to find the signature data in the
compiled output, which can happen if the compiler is not *actually*
compiling anything (LTO / LTCG mode).
If we left the unmodified file in the output, make would continue
running next time it was invoked, resulting in bad data.
Change-Id: I97f23a89a1ca1f8b8c449b0744de3f0c78daa706
Reviewed-by: hjk <hjk121@nokiamail.com>
This update enables using the module name as the parameter
in square brackets for the \l command. You will use this
when your link goes to the wrong page. e.g. Suppose this
link command went to a page in QtGui instead of the page
where it is meant to go in QtQuick:
\l { mytarget } { the text for my link }
When a link goes to a page in the wrong module, it means
the target exists in more than one module and because qdoc
searches the modules in sequence and stops when it finds a
match, it might match the wrong target. This would be a
collision in the single tree version of qdoc, but now qdoc
builds a separate tree for each module. Since you know
which module you want your link to go to, put the module
name in square brackets as the first parameter, like this:
\l [QtQuick] { mytarget } { the text for my link }
Now qdoc will only search for mytarget in the tree for
the QtQuick module.
The \target command can now be used anywhere. It has not
been tested in all possible locations, but it works in
the places where people have asked why it doesn't work there.
There will be a further update to complete this task for
implementing the other types of parameters that can be in
the square brackets.
Task-number: QTBUG-39221
Change-Id: I2db4fdd0319ff272ec1d2fa9dc396f14599d80f9
Reviewed-by: Martin Smith <martin.smith@digia.com>
-applied logic to projects that set (or not set):
-landing page
-home page
-version
-change would remove duplicate information and proper module names
instead of "Title | QtModule 5.4", it would be "Title | Qt Module 5.4"
-tested on various projects:
-Digia projects
-Qt 5
-Qt Creator
Change-Id: Ica7d5203d293910c98306f947bfee8454b9225d0
Reviewed-by: Martin Smith <martin.smith@digia.com>
-"HTML.tocdepth" variable controls depth value.
-setting to "0" disables table of contents.
-sections 3 and 4 usually don't have descriptive titles
to warrant their listing in the table of contents.
-table width and CSS (online and offline) don't support wide entries.
-Config class' getInt() function now returns -1 if a variable is
not set.
-for Qt 5 and projects which use html-config.qdocconf, tocdepth is
set to "2".
-added variable documentation.
Task-number: QTBUG-38967
Change-Id: Ibd612f5b846ecb9c4b575e7ac11605c6efd2b77c
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
qdoc stores the 'files to open' into the example manifest. These
files are opened in Qt Creator's editor when an example is selected
from the Welcome / Examples list.
This change uses the following criteria (case insensitive), in
order of preference:
- .qml file matching the project name
- .cpp file matching the project name
- .h file matching the project name
- main.qml
- main.cpp
A 'mainFile = "true"' argument is written for the file that is
preferred to be the top-most file.
Having a main.qml file take precedence over main.cpp ensures that
most Qt Quick examples open into the relevant QML code instead of
the boilerplate C++ used for launching the application.
Task-number: QTBUG-37203
Change-Id: I2ea58a31b1284f4f7d424dd35d49a84a23a88c23
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Traditionally, RCC in "C mode" was meant to bundle small resources into
a binary, like help texts or an occasional icon. RCC produces a .cpp
file containing the actual data in a char array which is then passed
to the compiler and linker as a normal source file. Larger resources
should be compiled in RCC's binary mode and loaded at run time.
Current Qt Quick use tries to deploy large hunks of data in "C mode",
causing heavy compiler/system load.
This patch works around the issue by splitting the process into
three parts:
1. Create a C++ skeleton, as usual, but use a placeholder array
with "easily compilable" (mostly NULs) data instead.
2. Compile the skeleton file.
3. Replace the placeholder data with the real binary data.
time (qmake5 ; make clean ; make) takes 1.3 s real time for a
100 MB resource here, and there is still room for improving patching
performance if really needed.
Change-Id: I10a1645fd86a95a7d5663c89e19b05cb3b43ed1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
the install dir may contain indexes from previous builds. a build must
never refer to previous builds.
Change-Id: I67c04df8f3f82bdbebb67e280f70795ed0a76ccf
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This update is preparation for implementing the actual task
described in the bug. To implement it required converting
the QML type node and the QML basic type node to be first
order tree nodes instead of subtypes of the documentation
node. This cleans up a lot of messy logic in some places.
It was also necessary to split the getLink() function in the
html output generator into two functions, one still called
getLink(), which handles the \l command, and one called
qetAutoLink() which is called for generating auto links.
This should make qdoc run faster.
The basic infrastructure was also added for parsing the
string in the square brackets for the \l command.
There will be a further update to complete this task.
Note that some autolinks might not be generated due to
this change. I haven't seen any yet, but I believe there
will be some. This can be fixed later, if it is a problem.
Task-number: QTBUG-39221
Change-Id: I8135229984398408205ba901b9ef95ceac74683c
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
identified by static analysis from
http://www.viva64.com/en/b/0251/
Change-Id: I0042336d9598415b978bf9819e74639685c627b5
Reviewed-by: Martin Smith <martin.smith@digia.com>
Any bootstrapped tool is a development tool, by definition. So the
effects of seeding the hash with a random number can cause the same
source input to produce different binary results, which can throw some
caching tools into disarray (like the Open Build System).
There should be minimal fall out from the reduced protection against
DoS. Since those are only development tools, "specially crafted" input
implies the developer is DoS'ing him/herself.
Note: the change to qhash.cpp applies to moc and rcc, which are always
bootstrapped.
Change-Id: I061ab52036e40627c0703f1bf881455cbf848f43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
"htmlTitle" never diverges from "fullTitle".
Change-Id: Id1ce9005311bd86aa9803836168a2bebae6db65d
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Move it from bootstrap.pro into qt_module.prf so it will apply to any
other bootstrapped libraries, like libQmlDevTools.
Variable called "SPLIT_SECTIONS" because -fdata-sections could be added
in the future, if it proves to be a benefit.
Change-Id: I3fbb004f111620a84e58e9112e9bce3afd95631e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-makes it more consistent with the C++ pages.
-easier to read for the search engines.
Change-Id: I172bdff04e0aa80ee58a903d112585992234d7d7
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
qdoc never did list variables declared in a namespace. It was
probably an oversight, because there are currently no uses of
the \variable command in namespaces. But recently a developer
tried to use \variable to document a namespace variable, and
it didn't work. This update corrects that problem.
Task-number: QTBUG-38734
Change-Id: I47b6234f2bafbb73dfb755a2ad82c9596a4489b1
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
When compiling with the -Wswitch-default flag, the compiler
spits warnings for the moc generated files.
In certain development environments (e.g. where MISRA rules
have to be followed) every switch statement needs to have a
default case. Unfortunately the moc generated files contain
switch statements without default case. This patch adds a
default statement to all switch statements that are generated
by the moc compiler.
Change-Id: I8f3d81e3463fce4d3abf2ea5d0fa8727a7d9ba2e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qdoc command \generatelist has an argument that tells
qdoc which list to generate. When the argument is "classes"
qdoc generates the "All C++ Classes" list. qdoc looks for a
common prefix for all the members of the list and sorts the
members of the list using the character that follows the
common prefix. The problem was that the common prefix "Q"
was hardcoded in qdoc.
This update allows the \generate list command to have a
second argument, which is the common prefix. If the common
prefix is not provided, qdoc sorts the members of the list
on the first character.
There is only one use of the \generatelist command with
the classes argument in Qt5. It is changed to be
\generatelist classes Q, and the qdoc user manual is
updated to reflect this change.
Task-number: QTBUG-38226
Change-Id: Ie1011d728819a1e5598bbdf73b7444009377d231
Reviewed-by: Martin Smith <martin.smith@digia.com>
This bug was probably intoroduced when the QmlPropertyGroup
became a first class Node type. Otherwise, there is no way
to explain how it worked at all. But now qdoc includes the
attaching type.
Some debugging code was also cleaned up.
Task-number: QTBUG-35559
Change-Id: I478efb7f4356d51015af9f33c893958d4b4ae301
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
This change greatly simplifies the code used for
reading paths from config files: near-identical
functions Config::getCanonicalPathList() and
Config::getPathList() are combined into one, and
the use of Config::getCleanPathList() is
replaced with the above.
Effectively, all paths read from the config files
are now converted into canonical ones.
It also adds support for absolute paths in config
files.
Task-number: QTBUG-36193
Change-Id: I2dc1ee6a67a400e056404ec1c09c6e81f643aa77
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This update makes it possible to link to the name of a
QML property group with a \l command. e.g. \l {Item::anchors}
Task-number: QTBUG-35844
Change-Id: I2dc51bd90eadd13754a8f4d3357f3f17605a068d
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
The comment shows to which string a QT_MOC_LITERAL is pointing.
Change-Id: Ia389d750b1b1c21e2242bad6beceea4f9298ff8e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This update fixes a bug introduced by the extensive changes
for QTBUG-35377. Three node subtypes - Group, Module, and
QML module, were promoted to be first line node types in the
update for QTBUG-35377. This broke the file name construction
routine for those node subtypes, which used to have the DocNode
node type. This caused empty ref attributes to appear for those
keyword elements in the qhp file. The file name construction
routine has now been corrected to account for this.
Task-number: QTBUG-37658
Change-Id: I307979255fdfd48493b3a4cebaf996b2130bc2c7
Reviewed-by: Martin Smith <martin.smith@digia.com>
kThis update fixes a bug introduced by the extensive changes
for QTBUG-35377. The name Qt represents two namespaces, one
in C++ and one in QML. The name "Window" is used in both of
them, so the link \l{Qt::Window} would cause a collision in
the single tree qdoc. In the multiple tree qdoc, there is
no collision, but in this case the link should have gone to
the C++ page and it went to the QML page instead. The fix
involved correcting the way qdoc searches for link targets.
Task-number: QTBUG-37633
Change-Id: Ib9b209eced937a0be0d3299f300ebf22b2776012
Reviewed-by: Martin Smith <martin.smith@digia.com>
This update fixes a bug introduced by the extensive changes
for QTBUG-35377. For a QML base type loaded from an index file,
its QML base type was not being resolved. This resulted in the
"All members" page for some QML types to be incomplete because
the pointer to the base type was 0 when it should have been set.
This change also introduces the concept of "just in time"
resolution for base type pointers, which appears to speed up
qdoc a little.
Task-number: QTBUG-37326
Change-Id: I5f09336ec70ba84029b44b245c56f7f8fe349757
Reviewed-by: Martin Smith <martin.smith@digia.com>
The current child concept was added to the Name
Collision Node to heuristically provide better
linking when a link operation reached a collision
node. It is doubtful that this improved linking
much, but now that qdoc uses multiple trees, it
is much less likely that collision nodes will
occur. In fact, there are none in in the current
Qt5. Therefore, the current child code is hereby
removed from qdoc.
Task-number: QTBUG-37067
Change-Id: I33aea5d550afb7ceaf941d49112e02c21d44f6dc
Reviewed-by: Martin Smith <martin.smith@digia.com>
With this update, qdoc is now ready for testing
with multiple trees. In making this change to using
multiple trees, it has become clear that qdoc does
not really need trees the way it currently uses them.
Each C++ class or namespace, or QML type is naturally
a tree tree structure, but above that level, what we
currently call a tree in qdoc should really be called
a collection of maps. This change has moved qdoc in
that direction. It remains to replace the Tree class
with a class that encapsulates a set of maps, one for
each major node type. That can be implemented later.
Task-number: QTBUG-35377
Change-Id: I39068a0cb26c01f14ec0e4621742d727efb913bf
Reviewed-by: Martin Smith <martin.smith@digia.com>
qdoc now knows how to search the forrest of node
trees in an optimal order. But there remain some
problems with specific searches that cross module
boundaries. These include group membership and C++
and QML module membership, as well ass C++ base
class resolution. Part 3 will be concerned with
fixing these remaining bugs.
With this update, qdoc now takes less time to
generate the docs for Qt 5. Testing indicates
that qdoc run time has dropped from about 14
minutes to about 7.5 minutes on an iMac.
Task-number: QTBUG-35377
Change-Id: I6bded6ef54124b4f6e5914cad4548f0b600209b0
Reviewed-by: Martin Smith <martin.smith@digia.com>
qdoc now builds a separate Node Tree for each index
file it parsed. The main Node Tree now contains only
the Nodes of things being documented in the current
module. This should make qdoc run a little faster.
qdoc now uses these separate trees to make intra-module
and inter-module linking more robust by searching the
trees in an order that depends on the type of link it
is searching for. The tree for the current module is
always searched first. Then qdoc searches the trees
for either the C++ modules or the QML modules, depending
on whether it is looking for a C++ link or a QML link.
In preparation for this update, qdoc was also simplified
a lot. Many functions became obsolete and were removed.
Others were combined.
Task-number: QTBUG-35377
Change-Id: Iea4e49869ff6a6ff0f4d53090728770d40d892f3
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
tst_qdebug didn't test adding something else after the MyLine object,
so I didn't realize that a space was missing there. All debug operators
should end with maybeSpace(), but with the settings of the caller, so this
requires restoring the settings before calling it. To make it convenient
for all << operators, the destructor of QDebugStateSaver takes care of that.
Change-Id: I18ab78d99d7ee3be951082b5b5d34718ee60e21d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For example file pages, added a link to the parent example page
into the navigation bar.
Also,
- Removed protectEnc() calls for strings added as Text atoms,
this is done automatically when generating the navigation
bar output, and doing it twice results in malformed output.
- Removed the subtitle from being appended to example file
title. The subtitle contains the full path of the file and
it's already displayed on the page body, so removing it
from the html title + navigation bar makes for a cleaner
look without losing any information.
Task-number: QTBUG-33022
Change-Id: I3ca942470453379e22f1a4aaec1d9b866d85bb5c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
-Qt Examples and Tutorials page does not need the table of contents.
Task-number: QTBUG-36838
Change-Id: Id51ebc7cba7831a24cd9d8e8e6bde7f96bece326
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
moc would skip the 'operator' keyword as unknown and try to parse a type again
but as it sees the '<' it looks for the corresponding '>' which does not exist
types can't start with '<' anyway, so return an invalid type and continue
parsing as usual
Task-number: QTBUG-36834
Change-Id: If3d27076ef9947abf8c57c594713eece9334d0b0
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
At first, my goal was just to fix Moc::until() to parse properly
template arguments containing expressions containing > or >>
such as Foo<(8>>2)>
But with the test, I realized that normalizeType also requires change
not to split the > > too much.
And QMetaObjectPrivate::decodeMethodSignature should not interpret
the ) within the template parameter as the end of the function.
Change-Id: Ia9d3a2a786368aeda1edcf66280d70f64cf05070
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Better late than never :)
Task-number: QTBUG-33749
Change-Id: I5035255e66a56754b609441f5b81ab119565a7cb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When writing the main/landing page for a documentation set to
a .qhp file, check that it's not a collision page. If it is,
default to 'index.html' instead.
Task-number: QTCREATORBUG-11035
Change-Id: I0269834f6e50fcf5ae779c026263e69e4c3cd7b6
Reviewed-by: Martin Smith <martin.smith@digia.com>
Make it easier to diagnose quoting errors in scripts.
Change-Id: I17894a426faa5cdf50f5ace4ed422ab2bd202558
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Using an iterator is not a good idea since the generateInnerNode can
end up adding new items to the childrenNode list and thus the iterator becomes invalid
Without this patch i was getting this trace in valgrind
==19251== Invalid read of size 8
==19251== at 0x474350: Generator::generateInnerNode(InnerNode*) (generator.cpp:1018)
==19251== by 0x4A422D: HtmlGenerator::generateTree() (htmlgenerator.cpp:276)
==19251== by 0x4AC369: processQdocconfFile(QString const&) (main.cpp:515)
==19251== by 0x40B894: main (main.cpp:669)
==19251== Address 0x943c1c0 is 0 bytes after a block of size 32 free'd
==19251== at 0x4C2C72E: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==19251== by 0x51676F2: QListData::realloc(int) (in /usr/lib/x86_64-linux-gnu/libQt5Core.so.5.2.0)
==19251== by 0x51677EE: QListData::append(int) (in /usr/lib/x86_64-linux-gnu/libQt5Core.so.5.2.0)
==19251== by 0x439BAB: QList<Node*>::append(Node* const&) (qlist.h:533)
==19251== by 0x4B46B3: InnerNode::addChild(Node*) (node.cpp:1262)
==19251== by 0x4B48DC: Node::Node(Node::Type, InnerNode*, QString const&) (node.cpp:179)
==19251== by 0x4B539F: InnerNode::InnerNode(Node::Type, InnerNode*, QString const&) (node.cpp:1193)
==19251== by 0x4B54EB: DocNode::DocNode(InnerNode*, QString const&, Node::SubType, Node::PageType) (node.cpp:1608)
==19251== by 0x4C0C5E: QDocDatabase::findQmlModule(QString const&) (node.h:535)
==19251== by 0x497EEA: HtmlGenerator::generateQmlRequisites(QmlClassNode*, CodeMarker*) (htmlgenerator.cpp:2005)
==19251== by 0x4995B9: HtmlGenerator::generateDocNode(DocNode*, CodeMarker*) (htmlgenerator.cpp:1533)
==19251== by 0x474508: Generator::generateInnerNode(InnerNode*) (generator.cpp:1010)
==19251== by 0x474372: Generator::generateInnerNode(InnerNode*) (generator.cpp:1019)
==19251== by 0x4A422D: HtmlGenerator::generateTree() (htmlgenerator.cpp:276)
==19251== by 0x4AC369: processQdocconfFile(QString const&) (main.cpp:515)
==19251== by 0x40B894: main (main.cpp:669)
Change-Id: I7a6ae0a689ea5edddacf7f27f9dce95b26a441df
Reviewed-by: Martin Smith <martin.smith@digia.com>
Moc should check full scope of any related objects or
gadget when it constructs extra data.
Change-Id: Ibd1b607a389cd4e788c0916984464cd9103d9c59
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
There is no point in saving \0 twice. Any code that could relay on it
is broken anyway, because moc saves \0\0 for an empty string.
Change-Id: I28fa4f78aae8c883c088df43ec89d608a99b3bdd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since now in Qt5 the moc does full macro substitution, it needs to handle
the defines passed is command argument, even if they span over multiple
tokens, or if they do not have any token.
Example:
moc '-DCOMPLEX=QVector<int>' '-DEMPTY=' foo.h
[ChangeLog][moc] Fixed passing -D of a macro defined to something more
complex than a single identifier.
Task-number: QTBUG-33668
Change-Id: Ie8131de215f1659a24af4778d52ee40cda19759f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
There is the warning it fixes:
moc_foo.cpp:28:9: warning: conversion to ‘qptrdiff {aka long long int}’ from ‘long unsigned int’ may change the sign of the result [-Wsign-conversion]
- idx * sizeof(QByteArrayData) \
^
qarraydata.h:282:49: note: in definition of macro ‘Q_STATIC_ARRAY_DATA_HEADER_INITIALIZER_WITH_OFFSET’
{ Q_REFCOUNT_INITIALIZE_STATIC, size, 0, 0, offset } \
^
moc_foo.cpp:26:5: note: in expansion of macro ‘Q_STATIC_BYTE_ARRAY_DATA_HEADER_INITIALIZER_WITH_OFFSET’
Q_STATIC_BYTE_ARRAY_DATA_HEADER_INITIALIZER_WITH_OFFSET(len, \
^
moc_foo.cpp:33:1: note: in expansion of macro ‘QT_MOC_LITERAL’
QT_MOC_LITERAL(1, 23, 5),
^
[ChangeLog][moc][QTBUG-36128] Fixed sign conversion warning in generated file.
Task-number: QTBUG-36128
Change-Id: Ibf00974dbfb419bb53a3109d93e4cee598bb0588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Those libraries are contained in QMAKE_LIBS_CORE and
GetSpecialFolderPath() is present in all supported versions.
Change-Id: Iae40714e0f234625b063aeb50e29fc79c4aaa6ea
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When parsing Q_PROPERTY declarations, qdoc tries to always
read an associated value for each matched keyword. This
fails for property declarations including a CONSTANT or
FINAL, as they have no associated values.
This change fixes the above problem and makes the parsing
more robust by checking the return value of matchProperty()
and skipping to closing parenthesis in case of failure.
Task-number: QTBUG-35722
Change-Id: Ia483b8e74aeef19b2e761b21473cd4f765cdca19
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
When declaring a Q_PROPERTY(SomeType::SomeEnum foo ...) and SomeType is not a
QObject but a gadget, then we must still include SomeType's meta object in the
list of related meta objects.
Task-number: QTBUG-35657
Change-Id: I46195140cb5d180c4f03bb1fe06a876e3fe11267
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is the first step in implementing an in-place conversion of QString
to QByteArray. This requires ref-qualifiers in member functions so we
know that we have an rvalue QString.
Converting from UTF-16 to Latin1 always requires half the memory.
For conversion from UTF-16 to UTF-8, the typical string will also need
the same memory or less: characters from U+0000 to U+007F consume one
fewer byte; characters from U+0080 to U+07FF and from U+10000 to
U+1FFFFF occupy the same space in UTF-8 and UTF-16; it's only the ones
from U+0800 to U+FFFF that consume more space in the UTF-8 string.
For the locale's 8-bit codec, we can't be sure and the code (currently)
needs to go through QTextCodec anyway.
This requires a #define set before #include'ing "qstring.h". However,
since qstring.h is included by the QtCore PCH, we need an extra qmake
compiler without the PCH flags to compile this .cpp.
After this change, the distribution of calls in QtCore, Network, Gui,
and Widgets is as follows:
const & &&
toUtf8 31 (74%) 11 (26%)
toLatin1 79 (77%) 24 (23%)
toLocal8Bit 26 (16%) 138 (84%)
Change-Id: Idd96f9ddb51b989bc59f6da50054dd10c953dd4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Assume an unrelated class that declares an enum and uses Q_ENUMS. Consider
then a class that uses UnrelatedClass::Enum as a Q_PROPERTY. We used to
include UnrelatedClass in the primary class's related meta objects, in order
to support use-cases like
obj->setProperty("enumProperty", "ValueOfEnumAsString");
If however moc happens to see Q_DECLARE_METATYPE(UnrelatedClass::Enum), then it
would exclude it from the related meta objects, which would silently break the
string based enum value conversion. This was meant as an optimization, but it
isn't apparent to the developer why sometimes the string conversion would
work and sometimes not (depending on whether somebody declares that macro).
This also becomes visible in QML, which relies on the same embedded type
information for enum assignments.
This patch removes that check in moc's code generator and cleans up the code a
little. However always including the prefix of Q_PROPERTY(SomePrefix::Enum ...)
is not correct either, because it may be that SomePrefix is a namespace, which
would cause compilation issues. Therefore we limit the inclusion of related
meta objects only to Q_OBJECT decorated classes the moc has seen, and for these
we save the fully qualified name in the related meta objects array (for QTBUG-2151).
While this patch makes the previous workaround for namespace issues by using a
Q_DECLARE_METATYPE not workable anymore, by saving the fully qualified name we
are making a hopefully sufficient effort to not require a workaround in the
first place. There's always the new workaround of fully qualifying the type in
Q_PROPERTY.
One side-effect of this change is that in the autoPropertyMetaTypeRegistration
test of tst_moc, the CustomQObject for Q_PROPERTY(CustomQObject::Number
enumValue ...) is now a related meta object, and therefore when querying for
the type of this property via QMetaProperty::userType(), we are now aware of
this being an enum and try to resolve CustomQObject::Number via
QMetaType::type(qualfiedName). As there is no guarantee for this to succeed, we
must now also do what is done in the non-enum code path in ::userType(), which
is to call the moc generated type registration function.
Task-number: QTBUG-33577
Task-number: QTBUG-2151
Change-Id: Ibf20e7421cba464c558a25c76a7e1eef002c6cff
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's still a relocation, but at least it can be marked read-only
after the relocation run, if indeed the dynamic linker goes to
such a length.
Change-Id: Ibadddac3ab99d2e58cc32cfd57311bddd3bdb0ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qdoc intends to prepend all html files related to QML with
a 'qml-' prefix. This doesn't work for basic QML types, as
those nodes do not have valid qml module name information.
This change fixes the issue by removing the requirement
for a qml module name, thereby always using the qml
prefix for a qml (basic) type.
Task-number: QTBUG-35229
Change-Id: If61572b2dc8a39be08140c37aa59646b88e99b29
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
For enum types that have QFlags versions, qdoc was
outputting the documentation with a hard-coded link
to qflags.html, which only workjed in the single
directory mode. When qdoc outputs modular documentation,
the href for the link should be "../qtcore/qflags.html" .
Now qdoc computes this href correctly before it writes
the docs. The href is no longer hard-coded.
Task-number: QTBUG-35209
Change-Id: Ibdf5b11dbd063726eb77048de78f8874c65752ca
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These can cause rebuilds unnecessarily when repeatedly running qdbusxml2cpp.
Change-Id: I902954d4bed6fe68802183e51d82700fe30af437
Reviewed-by: Mathias Hasselmann <mathias.hasselmann@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
- Replaced all \l instances that were using
the html file name qualifier to link to a \target.
- Updated the linking instructions to not mention
the html file name way to link.
Task-number: QTBUG-32173
Change-Id: Ic3e266e58de7566d533bbc7fbec7ff5c3ec8f231
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
QML types marked \internal were appearing in the
"All QML Types" list. These links were dead because
the pages for these internal types were not being
created, which was correct. Now these internal QML
types no longer appear in the list.
Task-number: QTBUG-34506
Change-Id: I1d005459e84ed9a2afae94b797b9d39aa3e517f3
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When generating output file names for examples, qdoc prepends
a module-specific prefix. Unless already defined, it defaults
to the project name defined in .qdocconf file. This leads to
wrong prefix being used in some cases - specifically, on pages
in qtdoc module listing examples in other modules.
This change takes the modulename prefix from the node, and
only uses the project name as a fallback.
Task-number: QTBUG-34581
Change-Id: Ia0a940cbc05ed819ff36c328cf9c1e30e2c65b5e
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
In 5.2, the HTML output is in a flatter structure and when they are
hosted in qt-project.org/doc, the documentation will be found at
http://qt-project.org/doc/qt-$QT_VER
The url variable is used by projects outside of Qt 5 which need
to link to Qt 5 documentation, such as Qt Creator.
Task-number: QTBUG-34584
Change-Id: Ifa55fcd9e402b0e184a41e316340e46aeb7101de
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Output a warning for each doc dependency that qdoc cannot
locate an index file for.
The index files are loaded for both prepare and generate
phases. To avoid duplication, output warnings only when
in generate phase.
Change-Id: I74f9ba78e4b57cb1a62e0d1c2efda01ecc85c06d
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This update to the Generator base class prevents qdoc
from writing an html file for anything that is marked
\internal if the user has not set the showinternal flag.
Task-number: QTBUG-34269
Change-Id: Ia60109d4568447501370bb9d4c1344a48f9b6113
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Because qdoc is part of qtbase/src/tools, it is not allowed to depend
on anything outside of qtbase. But qdoc uses the QML parser from
qtdeclarative, so qdoc has its own copy of the QML parser sources. The
QML parser has been updated to the current version for Qt 5.2.
Task-number: QTBUG-34269
Change-Id: I5ac9c8ff08a3494d5c35a0014a437be88f2dc31d
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
It was still using the QML module version number as
part of the search key. e.g. it tried to find the
type node for QtQuick.Controls::Button using
QtQuick.Controls2.Button, but now it searches without
the 2.
Task-number: QTBUG-34173
Change-Id: Ibc8b6d9ef4ceebb20c1be00ec3bc9190c51bcdf3
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
This fix not only gets the property lists correct
but also creates correct links to the property docs.
A side effect is that QML properties, methods, and
signals whose names begin with "__" are automatically
treated as if they are marked \internal. This had been
agreed earlier but had not been implemented. It is also
required to fix this bug so it is included here.
Task-number: QTBUG-33814
Change-Id: I57de1e49774db47cb57c042f181ccc8edec62d13
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When a QML type marked with \internal is read from an index file,
it is given private access instead of public access.
Task-number: QTBUG-34010
Change-Id: If9270372cf4db835dca9731bce8c446a2fa4e140
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The files in the doc/snippets subdirectory of each example
subdirectory are no longer parsed by qdoc as source files.
They continue to be used as snippets files.
This fix also ensures that there are no duplicates in the
list of files to be parsed.
Task-number: QTBUG-34003
Change-Id: Icec1a2a539237f24ee6bae89c6401f0dc81826d1
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This eliminates the possibility that the same file could
appear in the file list twice causing qdoc to parse it twice.
Task-number: QTBUG-34002
Change-Id: Iab63d778c9f955076515a8ae2f1bd9560099b13d
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Internal types can be inherited. Documentation is not created for
internal types, but if an internal type is abstract, its properties
must be listed on the documentation page of each subtype that inherits
the internal type. This fix includes internal types in the index file.
Task-number: QTBUG-33814
Change-Id: Ib6ef7cbd92804b3c605009802ddb15d35b32692c
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Unearthed by fe1cbe9ca7 while
building QPlatformSupport.
Change-Id: Ife56efe111dda6bcf9f11f9c144a4d1dc1651380
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the order of initialization of static variables is undefined, and we
therefore cannot (safely) initialize the array with static QStrings
declared elsewhere.
This was leading to crashes in MinGW gcc 4.8.0. Work around the issue
by initializing the array at runtime initialization instead.
Task-number: QTBUG-34172
Change-Id: I24f0e6af6685fc280d12c8ef90d40b8ebe994450
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Default values should have mark-up to denote that they are code.
This commit changes:
-"property is true" to "property is \c true".
-"Returns true" to "Returns \c true".
-"property is false" to "property is \c false".
-"returns true" to "returns \c true".
-"returns false" to "returns \c false".
src/3rdparty and non-documentation instances were ignored.
Task-number: QTBUG-33360
Change-Id: Ie87eaa57af947caa1230602b61c5c46292a4cf4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
HtmlGenerator::generateCompactList() no longer uses an algorithm to
find out a common prefix for classes/qml types when generating the
alphabetical lists. The common prefix argument is no longer optional.
To indicate there is no common prefix, pass an empty string as the
common prefix argument.
Task-number: QTBUG-33750
Change-Id: I4b44bbcff909fcea5c7bfd58c6796e303086bc68
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The QML module identifier is no longer useful.
The function to generate it is retained for now.
Task-number: QTBUG-32173
Change-Id: Ic811ed432f2059c0370e9e0d86b2e334b5c82a3c
Reviewed-by: Martin Smith <martin.smith@digia.com>
Remove a piece a debug code from qmlvisitor.cpp
Change-Id: I3a1a72d11597c36d277310c92bf9590633844d03
Reviewed-by: Martin Smith <martin.smith@digia.com>
This change allows an empty string to be used as a common prefix
for class/type compact lists, and uses it for QML types as they
do not have a common prefix like public C++ Qt classes do.
This fixes the issue with sorting order for QML type lists.
Task-number: QTBUG-33715
Change-Id: I28ab689d28017ae28eccbf590d1dbbe107665e33
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Updated qdoc to handle QML references without using the
QML module version.
Task-number: QTBUG-32173
Change-Id: Ibfba9bc92458ae04017706e904625e7d32fc0be4
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
For typedef nodes that have an associated enumeration, qdoc
generates incorrect location info (written to index files)
by simply appending '-typedef' to the node name. The correct
location to link to is the associated enumeration, if one
exists.
Task-number: QTBUG-33684
Change-Id: I749171ccae9ccc10f084a40fda14e72d5f4d44cf
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Not needed anymore now that it's using the new commandline parser.
Change-Id: I1a44c8658d128e4fbb9a6fc5000025f55e5293c2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
-one argument: assume it is the Qt version
-more than one argument: copy verbatim
Task-number: QTBUG-32172
Change-Id: Iaf5ec538f23abf4d1dfdf50bffcbbdede56d0b22
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
The Import statement shown at the top of each QML type
page now always gets the version number from the QML
module page for the QML type's module.
Task-number: QTBUG-32153
Change-Id: I57649c07ea680806bc92ad62fb3bc4d4fb56f717
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Commit 310031188c (Fix moc stumbling over gcc __attribute__
extensions, 2012-10-01) applied similar logic for GNU style
attributes.
Change-Id: I550eaefd703b4e974e6ffae7716f02074c8a8823
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The problem was they were being incorrectly written to
and read from the index files.
Task-number: QTBUG-33510
Change-Id: Ib0b34265cd22fff5ed88ae2fd5d5d7ea58b3761d
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Valgrind blamed CppCodeMarker::addMarkUp as slow, the patch improves
situation by ~12%
Use of QStringLiterals instead of const char* reduce amount of
allocations on startup.
Change-Id: I8737e02785506bba7e23868ab3952eab09d543d2
Reviewed-by: Martin Smith <martin.smith@digia.com>
This bug was marked fixed and closed, but I'm not sure
it was ever completely fixed. The qdoc commands for QML
property groups were not being processed, so although
the property group and its sub-properties appeared on
the page, the documentation text for the property
group and its properties was never written to the HTML
file. This has been corrected with this update.
Task-number: QTBUG-32341
Change-Id: I5b33ab512a53456379c52236496fb7bc74850842
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Currently, qdoc reports duplicate pages, when it should be reporting
duplicate page titles. Sometimes the duplicate titles actually refer
to the same page, but often they are different pages with the same
title. This update changes the error message to better indicate that
two identical page titles were seen.
A further complication was that the qdoc warnings for these duplate
page title errors were useless when the duplicates were in different Qt5
modules, because the support for file location information in the qdoc
index files was inadequate. This update adds better location information
to each section in the index file. This makes the index files bigger
and will increase qdoc runtimes, hopefully not too much.
Task-number: QTBUG-33506
Change-Id: I35db3c5e1551b9ef748d63377e94453da80c1e26
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Prevent qdoc from reporting duplicate pages for external pages with
the same URL and title.
Task-number: QTBUG-33462
Change-Id: Idabdb241aaa4fe105f7b3ea78229ff1ae8776ecf
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
If both n1 and n2 are "Private", the comment says they're equivalent,
but the function is actually stating that n1 < n2 AND n2 < n1.
Change-Id: I8e30b32c1e5240551ab1808baf6fc476841dfde4
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
A module plugin in qml belongs to a URI/namespace. This
uri is resolved run-time by QtDeclarative by knowing the
path of the qmldir that references the plugin.
For static plugins this becomes a problem, since we lost
the information regarding which plugin belongs to which
qmldir, since a static plugin has no file path.
To avoid pushing the responsibility of clarifying this
onto the application developer, it is better to embed this
information into the meta data of the plugins themselves.
Since this information can be resolved by the
build system, a new option to moc has been added:
-M<key=value>
that will let you add meta tags to the meta data from
the command line to each class that has an IID specified.
For the URI case, we can then e.g do:
-Muri=QtQuick.Controls -Muri=QtQuick.Controls.Private
Change-Id: I81a156660148fc94db6f3cac0473e9e1c8458c58
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In a while loop, when the first QML type encountered was
abstract, qdoc didn't create a class map on the heap, but
later in the loop, the class map was used anyway. This
caused a crash because of a null pointer to the class map.
Now qdoc creates a class map if one hasn't been created
yet, even if the QML type is abstract. This might not be
correct, but the real problem is probably the order in
which qdoc processes the QML types. It should probably
always start with a non-abstract type. But this fix will
at least avoid the crash.
Task-number: QTBUG-33387
Change-Id: Icecb165261469856820f81e3866218b15416ae3b
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This required special care because of @option-file where additional args can be read from.
Found again one undocumented option, --ignore-option-clashes.
Usage: moc [options] [header-file] [@option-file]
Qt Meta Object Compiler version 67 (Qt 5.2.0)
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-o <file> Write output to file rather than stdout.
-I <dir> Add dir to the include path for header files.
-F <framework> Add Mac framework to the include path for header fil
es.
-E Preprocess only; do not generate meta object code.
-D <macro[=def]> Define macro, with optional definition.
-U <macro> Undefine macro.
-i Do not generate an #include statement.
-p <path> Path prefix for included file.
-f <file> Force #include [optional <file>] (overwrite default)
.
-b <file> Prepend #include <file> (preserve default include).
-n <which> Do not display notes (-nn) or warnings (-nw). Compat
ibility option.
--no-notes Do not display notes.
--no-warnings Do not display warnings (implies --no-notes).
--ignore-option-clashes Ignore all options that conflict with compilers, lik
e -pthread conflicting with moc's -p option.
Arguments:
[header-file] Header file to read from, otherwise stdin.
[@option-file] Read additional options from option-file.
Change-Id: I0dfa8e029f95ad8084832530d701e30f315df98e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now qdoc doesn't use the QML module version number
when it isn't necessary. Page names are cleaner
without appending the version number to the QML
module name.
Also reduces the number of duplicate page warnings,
but this will be updated further next time.
Task-number: QTBUG-33257
Change-Id: Iba587164532bdc819523e0666f7561ac2dbd5e52
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qdoc-manual.qdoc is now an overview document
Each section is a separate qdoc file
Title modification in minimal qdocconf qdoc file
Task-number: QTBUG-31801
Change-Id: I9e50eb8c4f1f501e9c0bc768372d4393b73053ed
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The declaration for addToQmlModule() in class Tree
is removed.
Task-number: QTBUG-33350
Change-Id: I2278a67cd6daf0e7723b4bf6d33ff9ed33cf9266
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
-The qdb->findModule() call creates a module node even if the module
name is empty. This creates the extra module.html pages in some
doc projects.
-The fix is to create a condition for calling findModule()
Task-number: QTBUG-32990
Change-Id: I6c1d1c53f3814ea483df2cd05b8d39dc14b0fb7b
Reviewed-by: Martin Smith <martin.smith@digia.com>
This is (!a) == b which is not what is intended here.
This exact bug was fixed in a couple of other instances of the QmlJSParser
(in QtCreator and Qt itself) by now.
Change-Id: I46a50153d7c349f21e0a888e2e3b4c4fa65c27c0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
qdoc interprets the double-ampersand in function parameters
using rvalue references (e.g. 'Type &&other') incorrectly
as a logical AND operator, resulting in a syntax error.
This change works around the issue by treating '&' the same
as '*', and defining Q_COMPILER_RVALUE_REFS for qdoc.
Task-number: QTBUG-32675
Change-Id: I499611f16f22c33ff5b878da0cd59d67ddf53d72
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Before:
=======
Qt User Interface Compiler version 5.2.0
Usage: uic [options] <uifile>
-h, -help display this help and exit
-v, -version display version
-d, -dependencies display the dependencies
-o <file> place the output into <file>
-tr <func> use func() for i18n
-p, -no-protection disable header protection
-n, -no-implicit-includes disable generation of #include-directives
for forms generated by uic3
-g <name> change generator
After:
======
Usage: uic [options] [uifile]
Qt User Interface Compiler version 5.2.0
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-d, --dependencies Display the dependencies.
-o, --output <file> Place the output into <file>
-p, --no-protection Disable header protection.
-n, --no-implicit-includes Disable generation of #include-directives.
--postfix <postfix> Postfix to add to all generated classnames.
--tr, --translate <function> Use <function> for i18n.
-g, --generator <java|cpp> Select generator.
Arguments:
[uifile] Input file (*.ui), otherwise stdin.
Notes:
* "-dependencies" etc. still work.
* -n option still has effect, but technically not only for ui3 files
* the fact that the <uifile> parameter is optional wasn't documented
* -postfix option was undocumented
* -translate alternative for -tr was undocumented
The last two points show the benefit of using QCommandLineParser.
Change-Id: Ie05cfb9bbe50f4ac2788aa7b6011b2daa1acde6a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before:
=======
Qt resource compiler
Usage: rcc [options] <inputs>
Options:
-o file write output to file rather than stdout
-name name create an external initialization function with name
-threshold level threshold to consider compressing files
-compress level compress input files by level
-root path prefix resource access path with root path
-no-compress disable all compression
-binary output a binary file for use as a dynamic resource
-namespace turn off namespace macros
-project Output a resource file containing all
files from the current directory
-version display version
-help display this information
Undocumented: -verbose and -list !
After:
======
Usage: rcc [options] inputs
Qt Resource Compiler version 5.2.0
Options:
-h, --help Displays this help.
-v, --version Displays version information.
-o, --output <file> Write output to <file> rather than stdout.
--name <name> Create an external initialization function with <name>.
--root <path> Prefix resource access path with root path.
--compress <level> Compress input files by <level>.
--no-compress Disable all compression.
--threshold <level> Threshold to consider compressing files.
--binary Output a binary file for use as a dynamic resource.
--namespace Turn off namespace macros.
--verbose Enable verbose mode.
--list Only list the files, do not generate code.
--project Output a resource file containing all files from the current directory.
Arguments:
inputs Input files (*.qrc).
Change-Id: If20958afd6c01df5d0d755e13e8581bc1cb9af51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of using the fake "outputdir" to force qdoc
to generate a relative path to the actual output dir,
it now uses the value of HTML.outputsubdir, or just
"html" if HTML.outputsubdir is not specified.
Task-number: QTBUG-32580
Change-Id: I45c79a788e102213e6d343a7ed108a3d17d94759
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Corrected style issues pointed out in review.
Task-number: QTBUG-31801
Change-Id: Ibbc4e5f8dcd8ca129ae945b5e62b15daed47d86d
Reviewed-by: Martin Smith <martin.smith@digia.com>
qdoc's \include command now works as expected.
This command is only for including a file that
contains qdoc comments that contain qdoc commands
to be processed by qdoc. The file to be included
should have the .qdocinc suffix, although qdoc
will accept any suffix now. The file must be in
one of the directories specified by the sourcedirs
variable in the qdocconf file.
Task-number: QTBUG-33046
Change-Id: I45ea08932b4218aae369469968117fb5132f764b
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
To avoid duplicate files for examples, the files
are named this way. Suppose you have an example
called mandelbrot. The example is in a subdirectory
named mandelbrot, and there is a \example command
somewhere like this:
\example mandelbrot
In this case, the mandelbrot example is in the QtCore
module. Then the name of the example page will be:
"qtcore-mandelbrot-example"
...and the names of the example files will be:
"qtcore-mandelbrot-main-cpp.html"
"qtcore-mandelbrot-mandelbrot-pro.html"
"qtcore-mandelbrot-mandelbrotwidget-cpp.html"
"qtcore-mandelbrot-mandelbrotwidget-h.html"
"qtcore-mandelbrot-renderthread-cpp.html"
"qtcore-mandelbrot-renderthread-h.html"
Task-number: QTBUG-32580
Change-Id: Ic4445fd65b679523d6d94a8b0c19289d049ef0b0
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Don't use the 'emit' keyword in the moc generated code for properties
with MEMBER
Task-number: QTBUG-33094
Change-Id: I5a0950e9c7a0dee347a6a6c79098e3e7d4776014
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This may happen when we have namespaces and the qualified name is used
to scope an enum.
Task-number: QTBUG-32933
Change-Id: Ic4923bbfb138387bae1e3694172661ace8342089
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moc's C++ is not 100% accurate, so better process the invalid macro with
a warning rather than an error.
Such errors occurred in the QSKIP macro with variadic arguments since
that macro is defined conditionally.
It is also causing problem in boost header (cf task QTBUG-29331)
Task-number: QTBUG-29331
Change-Id: Ice6a01b675286540d6470c8e36920b7efd39b540
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
whatever it was used for is long gone.
Change-Id: Ifab7ae7968b1ab65982b1a6414274b3502bbc3d0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's not necessary. it was an artifact of a misguided approach to making
qdoc aware of the qt installation dirs.
Change-Id: I5ff363c8400d17698bf715e70b904aa69f71f0d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When you want qdoc to output the docs in a
single output subdirectory, you would add
these lines to your qdocconf file:
HTML.nosubdirs = "true"
HTML.outputsubdir = "html"
The name of the output subdir can be anything.
But if you leave out the second line, qdoc now
defaults to using "html" as the single output
subdir.
Task-number: QTBUG-32580
Change-Id: Ibfb2a0c578515ef934e816b2d7a516b64f0f9dcf
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The basic functionality is working. Add these lines
to qt-html-templates-offline.qdocconf, or add them
to the online version:
HTML.nosubdirs = "true"
HTML.outputsubdir = "html"
Before it opens a .html file for writing, it tests
whether the file alread exists. If so, it writes an
error message, e.g.:
...platform-notes.qdoc:140: error: HTML file already exists;
overwriting .../doc/html/platform-notes-windows.html
There are currently nearly 100 files being overwritten for Qt5.
Task-number: QTBUG-32580
Change-Id: I02b103fd00b9d1e624665ac518d571acc791be9d
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Specifies the QT variable needed in the .pro file.
The argument of the command is the qmake QT variable.
To use, add "\qtvariable <value>" to a QDoc comment
which contains the \module command.
QDoc will then associate the class with the QT variable.
Only supported for C++ classes at the moment.
Part of work done for QTBUG-32172
Task-number: QTBUG-32172
Change-Id: Ia8eea30fcfc771191c23a5f5994a48732959ea49
Reviewed-by: Martin Smith <martin.smith@digia.com>
In the case where the only obsolete members of a class
were actually non-members but just related functions,
the help file writer didn't include a reference to the
obsolete members file. This update fixes that bug.
Task-number: QTBUG-31379
Change-Id: I065da649bc12e3dcc81244939be0162599d54be9
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The placement of the header, since, inherits,
instantiates, and instantiated-by are now in a table.
For C++ classes:
Header: #include <class name>
Since: <version>
Instantiated by: <QML type>
Inherits: <parent class>
Inherited by: <list of classes>
For QML types:
To import: import <QML module>
Since: <version>
Inherited by:<list of QML types>
Instantiates: <C++ class>
Inherits: <parent QML type>
Inherited by: <list of QML types>
This is only a part of the work being done for
QTBUG-32172.
Task-number: QTBUG-32172
Change-Id: Ia9d29e824ef7ab4052ea59c6397b5f8fd24022b9
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When qdoc traverses its internal node tree to generate
either the html docs or the help file, it no longer
traverses nodes that were added to the tree as the result
of reading an index file.
Task-number: QTBUG-32622
Change-Id: Iac63ac2ce177b15b85a2aa73850c45891cbbc624
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The link to the class reference page for the class that
contains the obsolete members is now embedded in the text
description of what the page contains. This change affects
both the obsolete members papge and the compatibility members
page. Without this change, the link to the class reference
page stands off on its own and makes it look like the class
itself is obsolete or maintained for compatibility with
previous versions. Since this is not the case, the link is
now embedded in the text description of the page.
Task-number: QTBUG-31379
Change-Id: Ic5f4554c8722ee193f2dfae9efd8adab98f32ca1
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Jędrzej Nowacki
Frederik Gladhorn
Bernd Weimer
Jerome Pasion
Kai Koehne
Topi Reinio
hjk
Aleix Pol
David Faure
Nico Vertriest
Thiago Macieira
Martin Smith
Robin Burchell
Mitch Curtis
J-P Nurmi
Oswald Buddenhagen
Simon Hausmann
Sze Howe Koh
Alex Blasche
Kurt Pattyn
Iikka Eklund
Sergio Ahumada
Olivier Goffart
Friedemann Kleint
Albert Astals Cid
Tasuku Suzuki
Marc Mutz
Venu
Stephen Kelly
Ivan Komissarov
Sergio Ahumada
Giuseppe D'Angelo
Richard Moe Gustavsen
David Faure
Caroline Chao
Tobias Hunger