As of Unicode 5.1, some punctuation marks were mapped to MidLetter and MidNumLet
for better URL and abbreviations handling which caused "hi.there" to be treated
like if it were just a single word;
until we have the Unicode Text Segmentation tailoring mechanism, retain
the old behavior by remapping (some of) those characters back to their old values.
Change-Id: I49dea6064f2ea40a82fc0b1bc3c4f0b4e803919f
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
...and add one where we used to say that QWidget is "the base
class of everything that appears on the screen".
Change-Id: I573d8162fd69b7bfc5b0305f3ed6530129386b78
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The QLabel documentation for instance is quite confusing since it talks
about rich text without saying what it actually is. The QTextEdit
documentation can also be improved by being more explicit.
Change-Id: Ie718d170e18a0b713fe567fb707330d0085fb9e4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
When the floating-point behavior in MSVC is set to "precise" (default),
assigning nan numbers to a float causes the bit pattern to be altered
(only affects 32bit builds). We should therefore not assign the swapped
value back to a float and use it.
Task-number: QTBUG-25950
Change-Id: I7b6cc4d546e5c8aeafdede749056358b7d639ec7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Adds the fullscreen button on Mac OS X. Has no effect
on other platforms. Regarding the name I dropped the
"Mac" prefix (like MacWindowToolBarButtonHint). Other
platforms can use and we don't want to accumulate "Mac"
API's.
Change logic in QCocoaWindow check for this flag instead
of using WindowsMaximizebutton.
Change-Id: I9f2db75e8e71b3da36777c7e48852eda3ce9d534
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Requested by Allan Sandfeld Jensen for QWebkit, which needs to register
upfront all the mimetypes that a given plugin can handle.
Change-Id: I64b8d39c7988adfc7db4ed8bfdc73acd16e999da
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since it is declared in qglobal.h, we do not need to re-implement the
hack here.
QTOSTRING was only defined if QT_NO_META_MACROS was defined, so
practically not safe to use in other places.
Change-Id: Ie5b07d0fa7537ba79380b882a4c822583ee5635e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...just like described in http://www.unicode.org/reports/tr35/#Likely_Subtags.
This is much more effective than current "guessing" algorithm
+ makes it possible to instantiate a locale by the script or territory code only.
Change-Id: I674f8476e65b01c56960b6e83a1a346df0715274
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This patch adds some missing codes (two-letter ones only),
removes an outdated ones, and updates some names.
The legacy language codes are handled in QLocalePrivate::codeToLanguage()
(fortunately, there are only 4 of such codes).
Change-Id: Iff50aecd1c762b6399cd151aebb955f341d366c6
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
On the BlackBerry platform, applications run in a sandbox. They are
not allowed to read or write outside of this sandbox. Hence in
QSettings there is no use for the system scope and differentiating
between organization and application. This change will also improve
performance.
Change-Id: I79fee0140595385f3d33bd89fe5daa36b04836bc
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Alan Alpert (RIM) <aalpert@rim.com>
This change ensures that BPS events are delivered to the proper
channel even if the application code would change the channel.
Change-Id: Id44efbdd99350c639e391161dd89b8d422c4b330
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Jeff Kehres <jkehres@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Actually, this broke using QXmlStreamWriter with any codec
where characters in the ASCII range have a different encoding
than the ASCII standard.
This was a regression from 558fe9383ba0aecbec09cc411c0ebab132aac137
Task-number: QTBUG-23310
Change-Id: I75bd013e9d5de53da564a76c2f06e95ff35303a8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
c241d8921e renamed the methods but kept
the old ones "for a week or two" at Thiago's request.
Change-Id: I0747c032b549e45f6c8201db577d84863f39f599
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
Minor spelling and editorial issues
see remarks J.Pasion 30 Oct.
Corrected syllabifying error and minor punctuation issue
Added link to Qt Core in introduction
Change-Id: I1516c94c7f9b70125801ab7f9dfeeaed94db6d91
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
...with a generated one in a way similar to what
http://www.unicode.org/reports/tr35/#Likely_Subtags suggests.
The supplemental/likelySubtags.xml contains all the required data.
This changes some default countries to a most-expected ones.
Change-Id: I920a5623601d8661a943e78197d3bcc838191483
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: Ibce64ed1ec2809551b0cd334b53b33ed445f90f7
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The timeout is in millisecond. So we just need to divide by 1000 to get
the number of seconds
Regression introduced in f587e8f4fd
Reported in the comments of QTBUG-24795
Change-Id: Id16e05e7d04d33605860926f7516d14cdefd6a36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
as their meaning, in fact, is unknown (or default) country/script.
Change-Id: Id75a70d4b33c2092de414f3ac357f6bcb627ba47
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They're read-only member variables (key, hash value of the key)
set only in the ctors, or a "comparison" member function.
All of them can be constified.
Change-Id: Ifd9242577213f38439a4f998b678f5b05413ad21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao@abecasis.name>
When both freedesktop.org.xml and kde.xml define text/x-qml (*.qml),
the XML provider would look up *.qml, see two mimetypes, and treat that
as a glob conflict, and proceed with contents-based-determination,
which for this sample file, would find "C source" due to the C comment.
Fixed by ignoring duplicate pattern-mimetype associations.
The binary-cache provider doesn't have this problem, update-mime-database
already filters out duplicates when generating the on-disk extension tree.
Change-Id: Ie335b0b419e7413fa0550779709513f68c2bfc68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you set the duration of any variant or property animation to 0,
its progress will be stuck at 1 (0..1), and its "end" value set on
the target object, after start() has been called. If you change the
direction of the animation to QAbstractAnimation::Backward, you
would expect the progress to be 0 after start. Instead it's still
1; the code seems to assume that if the duration is 0, the
progress must be 1 always.
The fix is that if the duration is 0, the direction is checked to
determine whether progress should be 0 (Backward) or 1 (Forward).
Task-number: QTBUG-27969
Change-Id: Ibeca084bbbce41df1dca7b7d96c15b6b54394996
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thierry Bastian <thierryb@filewave.com>
Reviewed-by: Magne Zachrisen <mazachri@cisco.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The macros are only for tests in Qt itself, and will be changed without
restriction.
Change-Id: I4cf5b8559be510f01d0122c59492c5ea3e71c8d3
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This list is current at the time of writing. Since GCC 4.8 hasn't
finished development, it may still change before the final 4.8.0
release.
Change-Id: Ie4a6809bc6680cafcdd0c7a6a2fd6f8be790c8d2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since the behavior of boundaryReasons() method has been changed a lot,
remove the StartWord/EndWord enum values to force the affected code be revised;
StartOfItem/EndOfItem must be used instead.
Change-Id: I3d1d97d2dbe9680d290646d8c3adb5558ca26bd7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Following 731ba8ed08 this function is
not used anymore
Change-Id: Id908931b4b21c825bd80a4f03790630818c73c07
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Remove watchUnixSignal(), unixSignal() and associated code. These are relics
which were being used by QWS to detect virtual console switching. Currently
they are not being used at all. The recommended way to watch for Unix signals
in Qt is http://doc-snapshot.qt-project.org/5.0/unix-signals.html.
Change-Id: Id34207cb8853442302a45b2816356da0f973ebb1
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The previously missing mapFromSource() sets the proxy model in the
returned index. Otherwise, the returned index refers incorrectly to
the source model.
Follow-up to 9dfba89c28 and
e5ac4fb9b2
Change-Id: I25cd7baa4a93284ab14ede988ac524971870794e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
unlike for the paths which fall back to defaults based on the Prefix,
the specs must fall back to the values from qconfig.cpp.
Change-Id: I5f110621921cf278f2c3938a4ec5eb30a78c8502
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
enums are signed, while sizeof is unsigned.
as a side effect, we can optimize away one comparison by taking
advantage of the two's complement representation.
Change-Id: Ic0871306d30ad7217f2909e51e96a876a3f393dc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This triggers a bug in clang (before version 3.2). See also the bug
report: http://llvm.org/bugs/show_bug.cgi?id=12670 .
Change-Id: I9e0bc1cc39059ffa5e062652b932bc01e453ef98
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There is a common standard among all Qt modules. These changes affect
the final .qch file for each module.
Changes:
1)URL in qt-project.org is confirmed by DevNet maintainer
url = http://qt-project.org/doc/<module>
2)Landing page title mapping
indexTitle = landing page
3)"C++ Classes" as a child node.
The list of C++ classes and the titles are specified in the wiki.
4)Removed extra subprojects.
They are not needed for now. Each module may need additional nodes.
Change-Id: I1825476c21fe9aaddc9d6b512ff74229f17271a0
Reviewed-by: Martin Smith <martin.smith@digia.com>
Before, the functor slot (or lambda expression) had to have the same amount
of arguments as the signal.
This shown to be a big problem to be able to connect to signals that had
a QPrivateSlot.
This implementation use the type of the operator() of the functor to
know how many arguments we have.
As a bonus, we also can check the arguments in a static assert.
The test comes from https://codereview.qt-project.org/#change,38703
But this patch also works without variadic template
If the compiler does not support decltype, we workaround the lack of it
by using another level of indirection.
Change-Id: I9850b43e8caf77356a2ec3f4c0b0ed532d96029e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Pointer to const member function have a different signature, and hence
need their own traits code.
Change-Id: Ie4b2434a412f412444fb07ef1388a37cab105ecd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This fixes the build when QT_NO_BIG_CODECS is defined.
Change-Id: I832fb8ba5df6c4a6c1db9bdaecc498690357a56a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a read position variable to eliminate excessive memcpy'ing when
reading a partial buffer.
Specifically, fix performance issue of reading large files from
QNetworkDiskCache in QtWebKit2.
Task-number: QTBUG-27522
Change-Id: I21edc909bf9223971b2c3db5f1fa6b89c5b61c5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Antti Harju <antti.harju@ixonos.com>
The previously missing mapFromSource() sets the proxy model in the
returned index. Otherwise, the returned index refers incorrectly to
the source model.
Follow-up to 9dfba89c28.
Change-Id: I78ab9183820909b646a7333f28aa5ec7266fa675
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Documentation has been updated, changes apply to Qt5 as well as Qt4.
Change-Id: I13241a3b4c16d2cb1b24f80fe26832467621923a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Previously, translations in resource files were loaded through
QFile and the data was copied. Now, simply use the resource memory
in-place.
Change-Id: I55a06c1e7bb15c169cc69b908b3021136beac9d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the condition is supposed to suppress the event emission, not to trash
the return value.
Change-Id: I3e327ceedb909ac29ba975c49b0f039b50eb4ee1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The QWinIoCompletionPort thread was never properly cleaned up.
Maintain a reference count for QWinIoCompletionPort and create/destroy
it on demand.
Change-Id: I607b574484554dd3ad107dfb43b0a248bcf8b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's basically an attribute of qtcore (and everything that depends on it).
Change-Id: I6eeefeb5df70764399d9f22dca9dbec1843b8d68
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
__EXT_LF64SRC isn't defined in this case.
This also makes it consistent with mkspecs/common/posix/qplatformdefs.h
which uses QT_USE_XOPEN_LFS_EXTENSIONS and QT_LARGEFILE_SUPPORT
to decide which type of stat struct to declare.
Change-Id: Iaa155acc270783901376b543fdeffb5263294754
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Listing all files with QDir is slow.
Instead, use argv[0] for zygotized apps and _cmdname() for
non-zygotized.
Apps run through the terminal will fall in the zygotized case,
which is ok.
Note about zygotized apps:
Zygotized apps don't have an executable, they live in a shared
object file.
These apps are run through a deamon that forks and dlopens()
the shared object ( for performance reasons ).
For this reason we can't use _cmdname(), since it just contains
the the file path of the daemon.
On the other hand, non-zygotized apps have a bogus argv[0]
when run through the navigator ( command line is fine ).
Change-Id: I9953e8fa05c9fb11c33b3a38ebab00fe33ba4c44
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
This allows using QStandardPaths in one of the bootstrapped tools, if
required for a future need.
The Blackberry version appears to be usable in bootstrapped mode
already.
Change-Id: Ia4e9b9564395d2e151f8ac229ac2a2aa2982e92f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If ReadFile returns with an error then we must set our internal state
accordingly. QWindowsPipeReader::readSequenceStarted must be set to
false. If ReadFile fails, we're not within a read sequence.
Also, we must handle the ERROR_BROKEN_PIPE error.
Task-number: QTBUG-25342
Change-Id: Ic9247f170fa9cc47fa7e45d0f47ccfedac06a593
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The old code is just plain wrong for negative julian days. Replaced
with plain math from The Calendar FAQ [1], which is correct for all
julian days, provided you use mathematical integer division (round to
negative infinity) rather than c++11 integer division (round to zero).
[1] http://www.tondering.dk/claus/cal/julperiod.php
While the conversion code works for up to around JD +/- (2^63/4), we
only use an int for the year in the API, so this patch limits minJd()
and maxJd() to 1 Jan (2^31) BC and 31 Dec (2^31-1) AD, respectively.
Note that while the new conversion code looks like it would be more
expensive than the old, gcc will in fact be able to optimize it to be
slightly faster (probably because x86 hardware implements round to
negative infinity, and so GCC manages to optimize floordiv to a single
instruction, compared to the three instuctions needed for operator/).
In the following test application, run with a release mode Qt and
redirecting stderr to /dev/null, I measured an improvement from
6.81s +/- 0.08s to 6.26s +/- 0.16s user time over five runs on an
otherwise idle x86_64 system.
int main(int, char *[])
{
int year, month, day;
qint64 jd;
for (qint64 i = Q_INT64_C(-1048576) ; i < Q_INT64_C(1048576); ++i) {
QDate::fromJulianDay(i).getDate(&year, &month, &day);
jd = QDate(year, month, day).toJulianDay();
qDebug() << jd << year << month << day;
}
}
Change-Id: Ifd0dd01f0027f260401f7f9b4f1201d2b7a3b087
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Refer to Qt::TimeSpec instead of listing potential values (which are
incomplete).
Also, the current QDataStream version number is now 13.
Change-Id: I9a68385977dc2fe4dacee75330cb539850478480
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Fixed a couple of typos; also, wrapped the snippets in a main() function,
so that now the snippet file can be compiled
(and therefore the compiler can help us at detecting those typos).
Change-Id: Ie182a9c4cb451db13a6f4bfa5eaed66bc6966c8f
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To avoid leaking when converting a QFuture<T> to a QFuture<void> we need
to have a separate ref. counter for QFuture<T>. When the last QFuture<T>
goes out of scope, we need to clean out the result data.
Task-number: QTBUG-27224
Change-Id: I965a64a11fffbb191ab979cdd030a9aafd4436c2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The 'Non-GUI Classes' page is not relevant.
Also removed landing page from the 'modules' group.
Change-Id: Ie2d34d36f98a4697becfebd5fbc215913bbb41ce
Reviewed-by: Martin Smith <martin.smith@digia.com>
All modules currently have a test_modules CMake test. The
new module_includes test has very similar requirements, and can
obsolete the hand-maintained test_modules tests in all modules.
After all test_modules have been removed in other repos, the
module_includes test can be renamed to that name.
The types chosen need to have a constructor which can be invoked
with no arguments. QtConcurrent has no public classes which fit
that description so it is still tested separately
Change-Id: Id7929cd32b3112c293cbf5e6964cc894a697f9b1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: Ia9bf8d3c202b17746036e203268ef6229aaa900d
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This avoids an additional call to lstat() When using QDir::entryList()
with the QDir::NoSymLinks flag.
Change-Id: I3b602546c6a4502ae25a5748a12c60e69325bb5d
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: João Abecasis <joao@abecasis.name>
hasUnquotedAP currently only checks for an a or A, which is wrong
according to both the toString documentation and the comments for
hasUnquotedAP.
Change-Id: I03015734b846fe761085cf8f8fca2b29210cff97
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The M_E, M_PI_2, etc. math.h constants are not defined with MinGW-w64
GCC when compiling with -std=c++11.
Task-number: QTBUG-27561
Change-Id: I2267c170dd3788abc9c37425a9be514bbae51f5a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Alexey Pavlov <alexpux@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This implementation is unused. It was part of a platform that will
unfortunately not see the light of day. Remove it since no one is
maintaining it.
Change-Id: I9e675225a32f227739c688608f937df66a14e9a4
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We can insert directly on the most left-most Node.
We always enforce an insert here (unlike the insert call),
but that is not a problem since the keys in a std::map are unique.
Change-Id: Ib409b90ffc57a5a43dab4a4b08d34f6fdabd057f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In addition to the actual removal of the softkeys API in QAction,
this commit removes some enums related to the softkeys feature:
Qt::WA_MergeSoftkeys
Qt::WA_MergeSoftkeysRecursively
It also removes some "zombie" enums:
Qt::WindowSoftkeysVisibleHint = 0x40000000,
Qt::WindowSoftkeysRespondHint = 0x80000000,
(The only implementation that used these were removed when
qapplication_s60.cpp and qwidget_s60.cpp were removed.)
Change-Id: Ib6fc6d543def4757383d5f19256199d9d190c614
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Also generalize set _WIN32_WINNT to 0x0501 and _WIN32_IE to 0x0501 globally,
as it is out minimal requirement these days.
Change-Id: I8ca9102d49c37f908fd8ac032f707f8fe4fdcb22
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This fixes the build if QT_NO_CAST_FROM_ASCII is defined.
Change-Id: I0273794a83b0adaa0c15a9910cbcc9ea5d48ef7a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This suggestion keeps track of the most left node.
The point is that constBegin() becomes a lot faster.
That speeds up iteration a bit, and makes it O(1) to get the
first element. The penalty in insert and remove is very small.
On large trees it seems to be less than 1%.
It should be noticed that constBegin() is a very common hint
on my planned change to 5.1, and this opperation will without
this patch cost 2 x log N. One when the user calls the hint
with begin - and one where it is compared with begin.
Other std::maps has a very fast begin(). E.g
http://www.cplusplus.com/reference/stl/map/begin/
(begin with constant time)
Change-Id: I221f6755aa8bd16a5189771c5bc8ae56c8ee0fb4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Giving the std-map a hint (normally) improves insert performance.
There seems to be no reason not to provide this hint.
Change-Id: I4344607ebf54574a3ae9666d87a41a3c14762361
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Using a pipe for thread wake-ups is inefficient and can introduce significant
latency. Replaced the pipe by directly sending a BPS event.
Refactored the wake-up code in the private class of the UNIX event dispatcher.
Change-Id: Ic073b0b56c3cbf8327fc6bc3c37132cc3583ef86
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
This one was missed when the QDate range was extended.
Change-Id: I0dbcc9fdebca88f7397203d8e539429dcff9ac30
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-Added \annotatedlist for the groups
-Sorted and placed the pages on the index page.
Change-Id: Id1a4344c0b39f00036f5ac29b1fcb869d5602d2b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The variations of includes which should work are tested. For example,
in the case of testing the QtCore module and QObject include, the
following includes are generated and compiled:
#include <QObject>
#include <QtCore/QObject>
#include <QtCore>
#include <QtCore/QtCore>
As the private include directories are not available to the compiler,
this also tests that private headers are not included from public ones.
Change-Id: Id03d0fe290c9691e0f7515015892991d1701ab72
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
-qt-module-defaults.qdocconf already contains the HTML template.
Change-Id: I5757741166f0f688ce0e8a4e77ed45fd4d72f1c7
Reviewed-by: Martin Smith <martin.smith@digia.com>
As of Qt5, this macro is defined to be empty; simply get rid of these leftovers.
Change-Id: I167ccb4c9e92ec9b5e4faeb02bf9c5ef5d982b50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are more opportunities in QtCore and the rest of Qt to make signals
private instead of public. This is a test-dart to see if there is any
reason not to do this.
It would be nice to make QObject::destroyed private, but as it has a
default argument it would be source incompatible to anyone connecting
to the SIGNAL(destroyed()) instead of SIGNAL(destroyed(QObject*)).
Currently the function-pointer-based connect syntax does not accept
a functor (or lambda) with a different number of arguments than the
signal. Olivier says a fix for that might come in 5.1, but for now
the qfiledialog2 test is changed to not use that anymore.
Also, the function pointer for a private signal can not be assigned to
a local variable, so the qmetamethod test is changed to not do so
anymore.
Change-Id: Iaf776b822f9ba364f2c184df0c6b23811da56e44
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We had this issue in Qt 4 before: Clang considers the use of d uninitialized
in the initializer list for d. This might or might not be legal, the clang
devs are divided on that topic. Let's just use a more common form and ignore
the issue language lawyers.
Change-Id: I3324255963a6d0f4a9057fe0d1d9ae868d3efef7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is in line with what QTime::addMSecs and QDate::addDays do, for
example.
Change-Id: I902112486727f74f669a97bde6c42028e0838f8d
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Some statements could not be tested, such as default cases of switches
where all possible cases are already handled and some statements where
the system locale is used.
I also removed some statements that would never be reached and hence
will never be able to be covered by tests.
Change-Id: I8ea3071f66d942d986e65708732af6751d36b5e3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Converting the date 1 January 0001 to a string in the format
"dd MMMM yyyy" currently results in the string "01 January 1", but it
should be "01 January 0001".
Task-number: QTBUG-27287
Change-Id: Ia025da7343d1c36aaee34c47c6db551a6e89595f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not all executables originate from a BAR package, for example unit
tests.
Make those use the fallback code for finding the application file path.
Change-Id: I5603f329bbe74e37d319ddd190f72bc6f64e1a5c
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Because qt5_use_modules is a function that does a find package which
finds imported targets, things like this:
qt5_use_modules(foo Sql)
if (TARGET Qt5::Sql)
message("Qt5Sql_FOUND: ${Qt5Sql_FOUND}")
endif()
will show Qt5Sql as being not found, even though the target is in scope.
Fix that by making it a macro instead.
Change-Id: If314bd5b4d3f769c6c7df5ff2c924eabd16dcc0e
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The testcase in the bug report takes 370035 ms to sort the rows with
Qt 4, and 5646 ms in Qt 5 (when using the extra hints to layout*Changed).
That's an improvement of more than 98%.
Task-number: QTBUG-17732
Change-Id: If78f972d80c501e0cb39078228086c4f4ac8a65b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As opposed to the deprecated methods.
Task-number: QTBUG-25628
Change-Id: Ic1b50b1ac1b974cdd2dd9f0151d567227784e547
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The signal is removed from the API; all references to it are removed
from documentation; the unit test that checks for its emission is
modified to listen for QThread::finished() instead.
The QThreadPrivate::terminated flag is also removed, as it served no
purpose other than to trigger the emission of QThread::terminated()
As discussed at http://lists.qt-project.org/pipermail/development/2012-October/007216.html
the signal is not guaranteed to be emitted after every termination,
rendering it useless.
Change-Id: I7b0c45d7889da0d33875545331606f2208ee56fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
remove() can use non-detaching iterators internally before calling
erase(), which hasn't been exploited so far, so that the detach() in
erase() never actually detached. When using erase() from outside,
you can't do it legally without calling begin() or end() that detach()
before erase() is called.
Now remove() doesn't detach anymore, and detaching in erase() works.
With new tests that fail after changing only the erase() callers
and pass again after fixing erase().
Change-Id: I47c0a9e362dce8628ec566f5437d951755de96c8
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This improves iterating over /usr/bin with QDirIterator by more
than half, from 36 to 13 milliseconds.
Change-Id: Ib3a9271c3a6f81c1ea3c21d012c875c7e9bad2ad
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
.qmake.conf (and previously .qmake.cache) already does that for us.
Change-Id: I06cc01fa45921d7bd66dda7a0f88729faeff37bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These containers don't make sense and will just result in no action
being taken (all items added will simply be discarded), but it
shouldn't crash due to a division by zero.
Update the documentation to explain the fact.
Task-number: QTBUG-27339
Change-Id: Ib9acf5c0a9a826e6853e7beaf5e56511fde98dc6
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Ian Walters <ian@walters.id.au>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the event dispatcher native events will be processed in a tight loop
to drain the queue. IO events and timers will be postponed.
Change-Id: Ic2c06ed182027289eb5e7042fbae99efbd01ea27
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Documentation has been updated to reflect changes in Qt5.
Change-Id: I378858cf61f4bf62375c30c3903818d754dadcf0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The IA-64 C++ ABI does not encode the return type for non-template
functions (QVector is the template, not the function), which means that
these two functions have the same signature:
Node *QVector<Node>::begin()
typename class QTypedArrayData<Node>::iterator QVector<Node>::begin()
[both are _ZN7QVectorI4NodeE5beginEv]
When linking compilation units compiled with different
QT_STRICT_ITERATORS settings, only one of the two out-of-line copies
will survive. Depending on the ABI, we may have a problem: the ABI can
say that a function returning a structure takes an implicit first
parameter, which a function returning a regular pointer doesn't.
Task-number: QTBUG-27277
Change-Id: I57a59e5a7c46f55faabfe85c073dca89d2a7bbf3
Reviewed-by: Jan Kundrát <jkt@flaska.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't add invalid ranges to the result. They will be removed
whenever d->ranges is processed for public consumption
anyway. For example, QItemSelectionModel::selection() calls
merge() with another selection. The merge() method removes
invalid ranges already. But the invalid ranges don't need
to be there in the first place, so this patch removes them.
A longer-term goal is to maintain d->ranges as an always-sorted list.
This method can be called with a vector containing invalid
QPersistentModelIndexes when those persistent indexes are made invalid
in between layoutAboutToBeChanged and layoutChanged. It's a normal
thing to happen and a case that should be handled deliberately.
Change-Id: I741ed9208d8a75644975c9e8d61f0d6d78e20576
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In ResultStoreBase::addResults() it possible that the ResultItem we
create is invalid (filter-mode enabled). Since an invalid ResultItem
won't have any result data, we need to make sure that we don't allocate
any data for it.
Task-number: QTBUG-27224
Change-Id: Ic99b191db0e9dd4e29b64911f87d90a8148bb7a5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The file was already present but wasn't mentioned.
Change-Id: Icac4fd5276b071ed2173e72aed51abb4c0b5b50a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Still use it in qtestlib though because using qInstallMessageHandler
here would break all tests (still) using qInstallMsgHandler - Qt always
uses the new message handler if there's one, ignoring any message handler
installed through deprecated API.
Change-Id: I6fefefb315a2421425d2b7787e367fd348a33d83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Documentation has been updated, changes apply to Qt5 as well as Qt4.
Change-Id: I692869971bafffabbb9c323dc031f6d984c1adb9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The default symlink is not available on Windows, so the qplatformdefs.h
header is not available there. Instead we can bypass the symlink and
use the actual mkspec name directly.
Change-Id: I1d7e05f35c1ff56befab5bed307cb1755ade8377
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Be more explicit on from which thread the signals are emitted, and
mention that it is possible to connect finished with deleteLater
Change-Id: Ib72be94a81be383774f08d71915fa609843030e0
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This reverts commit daba2c507ad42c66dafa6a29cffa94e9641e0c58,
re-applying commit d9c06bf25210b3d0b31ee6126e57bcb82c292da1, because
the change was accidentally brought back in commit
eae8fb8599.
There's a potential deadlock when a QProcess is created while a
QCoreApplication is instantiated but never executed, or if the main
thread waits() for the child thread.
Task-number: QTBUG-27260
Change-Id: I9e0fdc0341b3063de90979377bac35f2a827b260
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Documentation has been updated, changes apply to Qt5 as well as Qt4.
Change-Id: I562914a439d8d27dc9e6b1aa117007edce214cc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Stop processing in internal headers, use correct include
syntax.
Change-Id: I9dcf1f6f89907986b7b58658be514083f213a3e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I7adb2e207cab89fbad9458cd0bcb856ecd2288f0
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
On Blackberry, select() can actually temporarily wake up to process
mative BPS events. Make sure to emit the aboutToBlock() and awake()
signals in this situation accordingly.
Change-Id: Ib324e702feb1cfebdc6926f80af9c92f291a2b94
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Change-Id: Ie7cf8236b376376a320e2de5ca65d2cd7da91c2f
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Documentation has been updated to reflect changes in Qt5.
Change-Id: I3d54d1875962bd27c43bb360ae7b3fda0b7702ba
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add BoundaryReason::BreakOpportunity flag that will be returned by the
boundaryReasons() when the boundary finder is at the break opportunity
position that might be not an item boundary.
This is the same as (StartWord || EndWord) in Grapheme and Sentence modes;
in Word and Line modes, BreakOpportunity flag might occur between the words
or in between of Line boundaries (e.g. in conjunction with SoftHyphen flag).
In other words, the text boundaries are always break opportunities, but not vice versa.
StartWord and EndWord flags has been deprecated by new StartOfItem and EndOfItem
flags which are not about the word boundaries only. In line breaking,
StartOfItem and EndOfItem are set for the mandatory breaks only.
Change-Id: I79bf297e2b988f5976f30cff0c8ca616385f6552
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
After allocating memory on the heap it is ATM not possible to use the
memory on the stack again, QVarLengthArray then uses/resizes only
the memory on the heap. But the memory on stack could be used
if it is big enough.
Change-Id: I566003c25dd1093eb6ba8087a1e5378a11712934
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After a exception is thrown in resize(), QVarLengthArray has an
invalid state with ptr == 0. On the next resize call when malloc
returns a valid pointer, oldPtr is 0 and it could crash in
memcpy because the pointer to the source is 0.
The patch ensures the valid pointer isn't overwritten with NULL.
When exceptions are disabled the user must ensure that malloc will
not fail.
Change-Id: Id12a5e3e1eacc551e4d1b64cba8e8414cfebd6e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any file including qstringbuilder.h would trigger a warning when
compiled with QT_ASCII_CAST_WARNINGS defined since it implicitely
converts a QString to QByteArray.
Explicitely call toUtf8() to fix the issue.
Change-Id: If20f9d4571c5d1ed789564196c9f1331e1efd1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
that will be returned by boundaryReasons() when the boundary finder
is at the line end position (CR, LF, NewLine Function, End of Text, etc.).
The MandatoryBreak flag, if set, means the text should be wrapped at a given position.
Change-Id: I32d4f570935d2e015bfc5f18915396a15f009fde
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They have unexpected results in Qt 5 (the Qt::GlobalColor one works
as expected in Qt 4, but was removed in Qt 5):
QVariant v = QVariant(Qt::red);
qDebug() << v; // QVariant(int, 7)
v = Qt::red;
qDebug() << v; // QVariant(int, 7)
The correct way is to use:
QVariant v = QVariant::fromValue(QColor(Qt::red));
The deleted constructors are the ones for which there is a class
with an implicit constructor taking the enum, and that class is
a built-in metatype.
QLocale::Language and QKeySequence::StandardKey would also fit
the description, but I can't include the header for QKeySequence
as it is in QtGui, and I don't want to include the qlocale header
in qvariant.h. Putting a QLocale::Language is probably very
uncommon anyway.
The QTextFormat test is doing the wrong thing, but the result isn't
being tested. Added new tests which fail before the patch.
Change-Id: Ia38a0784990f4d40ff7457a86daf58aabd4964eb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
When QSharedPointer is created with no user-specified custom deleter,
instead of storing a pointer in ExternalRefCount::destroyer to a
static function which, in turn, calls normalDeleter<T> indirectly (via
another function pointer), specialise the CustomDeleter class and make
it not store the pointer, but instead do the deleting directly.
The benefits are:
- the QSharedPointer's private data is smaller
- there is no double-indirection via indirect jumps to the actual
deleter
Change-Id: Ice5653c144912efb1226e432267a047b9799aaca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We don't need two ints if we can do it with one. We need to store only
the clock type to be used, which is either CLOCK_MONOTONIC or
CLOCK_REALTIME. In addition, we need an invalid value to indicate that
the test hasn't been done yet.
This also gets rid of an atomic that wasn't QBasicAtomicInt.
Disassembly of the compiled code indicates this is the most optimal
solution:
- one single variable load
- one test-and-branch to verify that a test is needed
- straight call to clock_gettime afterwards
Change-Id: I49788e45b50b6b7fcb7ba4e9332e5352a4428933
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No need to check for overflows since the change to qint64. as less than
half the qint64 range is a valid julian day, any overflow will be
detected as an invalid date anyway.
Change-Id: I3b6cad24e245ed9418c5804484f846b0b692153a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
addMSecs() / msecsTo() have always used qint64, and when QDate was changed
to use a 64-bit julian day, QDateTime::addDays() and QDateTime::daysTo() was
changed to use qint64 in order to support the full extended range, but
addSecs() and secsTo() seems to have been forgotten.
Change-Id: I3acc35ee2bcc9f353650eb42f97d428f706b2db6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Version 6.2 of the Unicode Standard is a special release
dedicated to the early publication of the newly encoded Turkish lira sign.
In addition, there are some significant changes to the Unicode algorithms
for text segmentation and line breaking to improve breaking for emoji symbols.
For more details, see http://www.unicode.org/versions/Unicode6.2.0/
Change-Id: I21cfd4f307e41b41a19d36cce87f7a44c2661bc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The event will be sent from the upcoming style animations. This change
merely introduces the new event type and makes both QWidget and
QGraphicsWidget call update() upon receiving the event.
Change-Id: I69bb4d05bacb22f7e3a2512cae68848801e4f4d7
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The bug report argues convincingly that, but for the pure virtual
updateCurrentValue(QVariant) function, QVariantAnimation is quite
usable as-is.
So add an empty implementation.
Reported-by: André Somers <andre@familiesomers.nl>
Task-number: QTBUG-13230
Change-Id: I689b4a80fc7d5dfae67c2255777f89afb16f9c21
Reviewed-by: Andre Somers <andre@familiesomers.nl>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMap has 4 different maximumNode() functions, but they are all
unused and just in the way.
Change-Id: I012145cfae32898830ec95e229514d9be838ae2f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The test is useless as we assert if the requested size exceeds
a certain limit. We could, as an alternative,
throw an exception, but in the end it's the caller's responsibility
to ensure that the requested size is a sane value.
Task-number: QTBUG-27285
Change-Id: I738950a6a2b51671a54e4d25c7e4c3ac0d7f63b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Append the Windows executables suffixes from the PATHEXT
environment variable.
The previous code had a bug since the 'break' statement
bailed out of the inner loop only.
Factor search code out into a separate functions, avoiding
repeated invocations of list.constEnd() and variable
assignments in the old code.
Add a static function that is called on Unix and on Windows
for executable names with a suffix.
Call another function applying a candidate list of suffixes
in case an executable name without a suffix is passed.
Lower case the extensions from PATHEXT, streamline code.
Split up the test, add a _data() slot for clarity.
Task-number: QTBUG-27457
Change-Id: I2bf34de52aeadddd3b937ad1e22191c3c850fd26
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove advice to subclass QThread; promote thinking of QThread as a
thread manager, not a thread; promote event-driven programming over time
micromanagement; warn against common pitfalls.
Result of collaboration in forum (https://qt-project.org/forums/viewthread/20691/)
and mailing list (https://qt-project.org/pipermail/development/2012-September/006738.html)
Task-number: QTBUG-16358
Change-Id: I57e3873976fad489176cbf9f7e680fd6992a8837
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We were breaking out of select() too early with a timeout of -1.
Change-Id: Icd47b307a6f3a9d11c862722759e24f560e72e9e
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This BPS bug has been fixed with the latest BB10 release.
Change-Id: I07f86f2d18b1e04f48b95a710d57864c69726c42
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This commit should now correctly address the throughput issue too.
Change-Id: Ie75d0e6f44500f2720b7af787a58ed6c0a3c8c9d
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
QSettings under windows adds "OrganizationDefaults" to the registry
key path when using QSettings::SystemScope.
commit ee2e497f1c missed the change
to HKEY_LOCAL_MACHINE
Task-number: QTBUG-27452
Change-Id: I561f4e57b5beda0f9a511de067eb17fc23e3c856
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSettings under windows adds "OrganizationDefaults" to the registry
key path when using QSettings::SystemScope.
Change platform notes section to document this behavior.
Task-number: QTBUG-27452
Change-Id: I4d00b2da0825efdb360336e4f82080b6b29a54f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
We need to handle CMAKE_INCLUDE_CURRENT_DIR for include directories.
Otherwise generated files located in the current binary directory are
not found as expected.
e.g. *.json file as meta data for Qt5's plugins generated at build time.
Change-Id: I14ae1e7013f9d8b485aa990d50db4a03ca4f4b81
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
for the case when the boundary finder is assigned to an invalid one.
Change-Id: I5b60984ff3fd99972fcae21895684bd83b012780
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This event can be used by any platform plugin to implement
special application panels/overlayed menus.
Currently used by QNX only.
This replaces sending fake Qt::Key_Menu presses in the QNX
plugin. Qt::Key_Menu is already used when invoking context
menus with the keyboard.
Change-Id: I9c8f1743fd147a07c11883323800017376915ae1
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Keep the original QString that triggered the parsing error, instead of
just one QChar. This provides more powerful error messages, like:
Invalid IPv6 address; source was "http://[:::]"; scheme = "http", host = ""
(QUrl cannot keep invalid hostnames)
Invalid port or port number out of range; source was "http://example.com:abc"; scheme = "http", host = "example.com"
(QUrl cannot keep a non-numeric port number)
Invalid path (character '%' not permitted); source was "foo:/path%?"; scheme = "foo", path = "/path%25%1F"
(the tolerant parser runs first, so the faulty component is fixed)
This stores the error state in a special structure which is not
allocated under normal conditions, keeping the memory consumption
down. On 32-bit systems, QUrlPrivate does not increase in size; on
64-bit systems, it grows by 8 bytes.
Change-Id: I93d798d43401dfeb9fca7b6eed7ea758da10136b
Reviewed-by: David Faure <faure@kde.org>
Make both invalid hostname messages start with "Invalid hostname". And
split the empty port error from the invalid port one.
Change-Id: I870d1ed6fb07ec494f553871a37ed167141ffc06
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Just so the code generation is a little better.
Change-Id: I2a43a4df0ae67900c465a6c2b4f2b8ba284dbbaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: David Faure <faure@kde.org>
They're never accessed outside of qurl.cpp anyway, so let the compiler
know that it doesn't need to generate a full out-of-line copy for them
in case it does inlining.
Change-Id: I2be069b3fd2658eff9ad3023c21c8ae653c389ab
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: David Faure <faure@kde.org>
It used to return bool because setHost returns bool and, therefore,
setAuthority could fail. However, the return value is never checked,
in either parse() or QUrl::setAuthority(), because there's no error
recovery.
This is a small optimisation.
Change-Id: I25660d66cfad64ca5b9706cc38afa0e97ba3ee0b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: David Faure <faure@kde.org>
That's what we have QUrl::errorString() for. This will become evident
especially now that QUrl::toString() / toEncoded() return empty if
there are errors.
Change-Id: I64a84e9c6ee57c0fc38cc0c58f5286ddc1248d1f
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: David Faure <faure@kde.org>
As the comment says, an empty scheme is not permitted. However, if
that error were to happen, QUrl falls back to parsing the URI as an
"URI reference", starting with the path.
E.g., ":/foo" is a path of ":/foo", which will in turn trigger the
compound "colon before slash" error.
Also, we don't percent-decode in the scheme.
Change-Id: I438a61e17323c7722ddcc64792577a9ecb869c4b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: David Faure <faure@kde.org>
If an URL is invalid, let's indicate that in the test output. To be
helpful, let's make QUrl::errorString() include the component form of
the URL.
Change-Id: Iaafe16973ded79c7ea688fbb23808d91253e8c14
Reviewed-by: David Faure <faure@kde.org>
These two errors can only happen if one calls setPath() explicitly. They
cannot happen for parsed URLs, which is why they are only caught with
isValid(). It's not possible to set the error condition in setPath()
either because they depend on the presence / absence of the authority
and scheme.
Also update all the unit tests that set a path not starting with a slash
and were just "freeloaders" on the previous behaviour.
Change-Id: Ice58cd4589a850452d7573a5b19667bbab2fb43e
Reviewed-by: David Faure <faure@kde.org>
As it was confusing to use the term local file when referring
to a file that was accessible using native APIs and not just
a file that was on a hard disk somewhere already the function
name has been changed.
By renaming it to createNativeFile we keep it consistant with QFileInfo
which has an isNativeFile() function too.
Test also added.
Task-number: QTBUG-3169
Change-Id: I410e7ed28133d68fd312c6c0faf3f7191460d7ce
Reviewed-by: João Abecasis <joao@abecasis.name>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This cancels only the I/O operation of the reader and not all
operations on the handle.
Change-Id: Ie442199534cf45e58bb2e053da9fecee961a460e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When doing multiple I/O operations on the same handle, we get notified
for every operations. These must be distinguished by comparing the
pointer to the OVERLAPPED struct.
We now pass the OVERLAPPED pointer via the notified signal and let the
receiver decide if it wants to handle this notification.
Change-Id: I4efe70f39c6ae5282b949f2f4b21f6e7dd3df785
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
They are stored as such anyway, and this allows clients to not have to
convert between QModelIndex and back so much. This should be
fully source-compatible.
Change-Id: Ia606ea082442089a0aae1583380c3710ce61d3d1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Usually layoutChange is used for sorting elements. The parents parameter
to the signal already hints at a localization of what is being sorted, if
it's just one level in the tree. The new hints enum can be used to only
consider how the first column of a table gets sorted, because all other
columns will be sorted the same way.
Change-Id: I65dd2996894bbdb45a2f6288edbeaa49e4053256
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Functions like QByteArray::at() assert the given index:
Q_ASSERT(i >= 0 && i < size();
These functions typically get inlined. Now if the index is
e.g. size() - 2, then gcc will emit an ugly warning in
client code ("assuming signed overflow does not occur when assuming
that (X - c) > X is always false").
This can be easily prevented by casting both sides of the second
comparison in the assertion to their unsigned type. The explicit
comparison to zero is then no longer necessary, since that condition
is tested implicitly by the other comparison due to unsigned arithmetic.
Change-Id: Ic7244e1fa5da00a47d1fe0ed56fb81c23d444dfe
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace storage and operator int() return types with unsigned int
if the enum is unsigned.
This fixes a number of exisiting warnings, in particular with
Qt::MouseButton under GCC.
Change-Id: Ia12d36212329aec3e9d62a5fbd38809a6c2b36d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This class belongs to QThreadPool/QRunnable more than to QtConcurrent, so
move to QtCore, where QThreadPool awaits it.
Change-Id: Ibf20288a986593bf779453427c2dae8db1e1423a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No compatibility header needed. While this wasn't marked as private API,
it wasn't documented, either.
This is a prerequisite for moving QFuture to QtCore.
Change-Id: I8e986e6e2a22fbe5cf08d0600ec39ae9ae993e20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Leave the old name as a deprecated typedef; adapt users.
This is a prerequisite for moving QFuture back to QtCore.
Change-Id: I81dcee2c7e6eb234c16f3f42e2415ca0da3dc4f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We must not create pipe readers for the forwarded channels as we don't
want to read from stdout/stderr into the internal QProcess buffer.
Also, we must not pass CREATE_NO_WINDOW to CreateProcess because this
will render our stdout/stderr handles useless.
Change-Id: Ie6485e86c103d1e9225cf39c04aa54093c1efe0d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is exactly the type of pointer arithmetics that GCC likes to
miscompile.
Just use offset >= size() (=subtract begin() from both sides).
Change-Id: Ifb13652d7b96bf4c06727d9c965516e95d16ab5c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These indexes are later used as the boundary points of a QItemSelectionRange
anyway, which means that they're going to become QPersistentModelIndexes again
soon.
Because QPersistentModelIndex::row and ::column API are not inline, we cache
the resulting values in the loop.
Change-Id: Ib5099148269a8ccbb7ff2d8819a347e429c55dd1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QPersistentModelIndex is not so big that it causes very bad QList performance,
but considering how we use the container, QVector is fine. We never prepend to
the container, we only ever append, clear and iterate over it.
Change-Id: If1e53db9252c22340f1e0179b14a460495b5b35d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The implementation of QAIM can implement an efficient version of sibling.
Task-number: QTBUG-17732
Change-Id: I474dbc11e52b3ccc42e2165bc9336882fab13d03
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
These function were replaced by QMetaTypeFunctionHelper class that is
a bit more flexible.
Change-Id: I5aee2089f543b6e05c4d65a688fa8ca721f8abe0
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QPostEventList is kept sorted by priority; std::upper_bound
is used to insert a QPostEvent in the right place in the list.
Turns out that MSVC2008 is a bit too picky and tries to see if the
list is actually ordered. This causes a build failure as there is
no operator< defined between two QPostEvents (in fact,
an integer -- the priority -- is passed to std::upper_bound).
Work around this issue by defining operator< between two QPostEvents.
Change-Id: Ie3562dd0cc7253e25fc988b25d566d9d9e9fe62b
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
1) It is not strictly necessary since the method argument type is already
designed for clickable here. Thereby, it is just a duplication.
2) It is not done inside the removeNativeEventFilter, so it is not consistent
now.
3) Similarly, the following documentation in 4.8 did not have another explicit
reference to the documentation of the EventFilter typedef:
EventFilter QCoreApplication::setEventFilter ( EventFilter filter )
Change-Id: I45fd42a03b16fd173fca9d734a7771e804d577d8
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: David Faure <faure@kde.org>
Cause Qt5's source file use "cpp" as suffix
and automoc use "cpp" as suffix too.
Keep it with same feel better.
Change-Id: Iba3f8ffb5c3dbf003a9e1aacf3706089c1b6765c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
QMetaType has a way to "switch off" some types from the build.
QtMetaTypePrivate::TypeDefinition<T>::IsAvailable is defined as false
for all unaccessible types. Sadly that information was never used by
gui and widget handlers. The patch implements it.
Change-Id: Ie5835be4c88cfbbca8a4e9199e31ddfc20cae190
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jing Bai <jing.bai@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is another iterator called it at the top of this function.
Change-Id: I8addf47d66f098c5d811eb54674525eddb4d4a1f
Reviewed-by: David Faure <faure@kde.org>
is_signed/is_unsigned check whether the type argument is signed
or unsigned, resp., and will be used in QFlags to select the
correct underlying integer type.
not_ is used in the implementation of is_signed
not_c is for completeness (version of not_ that takes a bool
instead of an integral_constant).
Change-Id: I77cc445e8c6cf3181336505c9c13478fba3e7890
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An int is not enough to hold all values of a 64-bit enum, so
don't allow to compile QFlags for such enums.
Change-Id: Ia291c4a5e2160dfd6d5a35e61a7f71ab571b9d9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The obvious idea is that a connect() happens behind the scenes.
As QObject::connect takes a pointer-to-const, QSignalTransition should
do that as well.
TODO: the API becomes asymmetric in that it takes
a "const QObject *" but returns a "QObject *". Reasoning is needed.
Change-Id: I18d0436e7036eee851fd36d5b8ccda4a4757938f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It's perfectly correct to leave members uninitialised, since they are zero initialized.
Change-Id: I0d0c737cf35793a2633d44ce194af7f489903c03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A simple heuristic is used to detect the word beginning and ending by
looking at the word break property value of surrounding characters.
This behaves better than the white-spaces based implementation used before
and makes it possible to tailor the default algorithm for complex scripts.
BIG FAT WARNING: The QCharAttributes buffer now has to have a length
of string length + 1 for the flags at end of text.
Task-Id: QTBUG-6498
Change-Id: I5589b191ffde6a50d2af0c14a00430d3852c67b4
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Member variables for lastSeparator, first and lastDotInFileName are now
initialized to -1 (non-existing), where the previous value of zero would
mean a separator/dot at that position and resulted in path() returning
'/', instead of '.'.
Tests were expanded for better coverage of empty state and
default-constructed instances.
Change-Id: Ie27547886b52224d38b5be0b4f920c9927fd440f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Moc should not see a defined QT_NAMESPACE, to
keep the names of all symbols consistent with
an un-namespaced Qt.
Change-Id: Ia72afabaa0820b02a0863148510122ce942a5082
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We had two instances of this function in the Qt source code, one clearly
a copy of the other, so both had the same thread-safety issue. Instead,
let's have one copy and have both write_nosignal() and sendto() call
them.
Q_NO_POSIX_SIGNALS is also gone. It was only used with Symbian.
Change-Id: I0f1354a8e9df8e6b10a02f86a940e3c6d1222087
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The functions dealing with the void* internalPointer() can't be
constexpr on GCC 4.6 and Clang 3.2-trunk, even though GCC 4.8-trunk
accepts it, because of the casts required.
Change-Id: Id04105312da3d0c7632f7df06a34bc5a71120b32
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Rationale:
1. Comparing pointers that don't point the same array is undefined behaviour, IIRC,
and op== and op< did that.
2. The functions that cast to/from the storage type can't be constexpr. It makes
more sense to have the quintptr functions be constexpr (they have a fighting
chance to actually get passed something constant) than it is to have the void*
functions constexpr. Thus, the storage type should be quintptr.
Also prepare op< to be constexpr-compatible.
Change-Id: I4b2d4a0ec8ca80d619d272bf07c57887cbd11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Otherwise we get strange build errors by attempting to build an
project in debug mode against a release-mode Qt:
http://testresults.qt-project.org/ci/QtBase_master_Integration/build_03955/win32-msvc2010_Windows_7/log.txt.gz
(grep for MSVCRTD)
The CMAKE_BUILD_TYPE variable is always specified by the ctest_testcase
driver as either Debug or Release.
Change-Id: Ia5af7f0c31550b92679a3190e07b4e5c4ea638c6
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The result of replacements for special characters should not be
used here. CTest needs the replacements for the test names, but
requires the argument to the project() command to match the
argument to ctest --build-project.
Task-number: QTBUG-27087
Change-Id: I4ff7a7e00ddb65ab0c0f2305901e1d03f46e07d1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The name passed to the project() command must be the same as the argument
to ctest --build-project.
Initially I had appended _build to disambiguate the generated project
from the project under test, but that is not needed anyway as the
project under test is self-contained, so it's ok.
Task-number: QTBUG-27087
Change-Id: I648d57271529d4e8d308ff60b81419ade29b2e44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Negation operator ("!") have precedence over bitwise and ("&").
Change-Id: I39e2d99da6eaa4477bbe35a1259f745e05c9841a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I81c378ef6aeeada5e116f1394cc9fc67f901ffd6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QAIM::createIndex() took either int or quint32, but QMI::internalId()
returned qint64.
In the new interface, createIndex() takes, and internalId() provides,
integers of type quintptr.
This matches the storage size of the void* in the model index and
avoids truncation.
Remove the
createIndex(int, int, quint32) and
\obsolete createIndex(int,int,int)
overloads.
This makes a literal 0 in the third parameter ambiguous now.
The solutions have been noted in changes-5.0.0.
Change-Id: I0a0ecd8430eaf695129a4d09d14d4e30745485c4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Use a pointer-to-member instead of void** for Zero, the type that is
used to accept only a literal 0, but not other ints, as QFlags ctor
arguments.
This was developed while trying to find the cause for a build failure
in the qCompare<QIcon> specialisation after adding underlying-enum
detection to QFlags, and it didn't help, but I think it's a saver
alternative to void**, in particular since the ctor in question is
implicit.
Change-Id: I71c67b0b50e9404e4e42836d09d62663296f58af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Introduce QCharAttributes and use it instead of HB_CharAttributes everywhere in Qt
(in Harfbuzz, the HB_CharAttributes is only used in the text segmentation algorithm
which has been moved from HB to Qt (well, most of it)).
Rename some members to better reflect their meaning,
remember to keep HB_CharAttributes in sync with QCharAttributes.
Also replace HB_ScriptItem with a (temporary) QUnicodeTools::ScriptItem struct
that will be replaced with a more efficient/friendly solution a bit later.
The soft hyphen and the mandatory break detection has been factored out
of the default text breaking algorithm to a higher level in order to refactor
the QCharAttributes bitfields and to optimize the implementation for the common case.
Change-Id: Ieb365623ae954430f1c8b2dfcd65c82973143eec
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The code is not handling formats like "HHmm ss" correctly, so it needs
to be documented until such support is provided.
Task-number: QTBUG-26067 QTBUG-26596
Change-Id: Ia456d8020e3e0aa9422e6e6987ac984f308facf9
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way, I can ensure that the noreturn qFatal function calls a
noreturn function as its last action.
Change-Id: I6db7aa2539af430414645f386d7fce87cdb97186
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This allows, among other things, to use QVarLengthArray as the target of
a std::back_insert_iterator.
Change-Id: I507f612a23da854bf865780aa0a7e6312f4a896b
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Konstantin Ritt
Paul Olav Tvete
Samuel Rødal
Mitch Curtis
Christian Strømme
Morten Johan Sørvig
David Faure
Olivier Goffart
mfekari
Bernd Weimer
Jan Arve Saether
Oswald Buddenhagen
Eskil Abrahamsen Blomfeldt
Nico Vertriest
David Faure
Thiago Macieira
Friedemann Kleint
Giuseppe D'Angelo
Andreas Aardal Hanssen
Stephen Kelly
Orgad Shaneh
Rafael Roquetto
Mark Brand
Erik Verbruggen
Jerome Pasion
Peter Kümmel
Antti Harju
Michele Caini
Thomas McGuire
Joerg Bornemann
Sergio Martins
Frederik Gladhorn
Jon Severinsson
Liang Qi
Jonathan Liu
Thorbjørn Lund Martsum
Sergio Ahumada
Tor Arne Vestbø
Sean Harmer
Tobias Hunger
Jens Bache-Wiig
Sze Howe Koh
Andreas Hartmetz
Oswald Buddenhagen
Kai Koehne
J-P Nurmi
Fabian Bumberger
J-P Nurmi
Jocelyn Turcotte
Marc Mutz
Pierre Rossi
Sean Harmer
Thiago A. Correa
Andy Shaw
Jędrzej Nowacki
Christian Kandeler
Laszlo Papp
Yuchen Deng
João Abecasis
Lars Knoll
Konstantin Tokarev
Iikka Eklund
Mitch Curtis