When a new-style connection is created (a SlotObject), we don't store
the method offset since there isn't one. So don't try to read it.
Qt::UniqueConnection only applies to old-style connections, since we
can't compare the slot objects for equality. In any case, an old-style
connection and a new style will never be considered equal.
Task-number: QTBUG-39927
Change-Id: I10a39a7bc97a2ec9509a0708038cc491bcc67329
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Elias Probst <mail@eliasprobst.eu>
QSignalBlocker resets to the previous state, which might have already
been a blocked signal state.
Task-number: QTBUG-39352
Change-Id: I918cc6ea346755b940e027cee5d6704824fbba32
Reviewed-by: David Faure <david.faure@kdab.com>
These hooks only worked reliably with LD_PRELOAD on Linux/GCC, on other
platforms they depended on what exactly the compiler optimizer is doing
as well as some nasty assembler rewriting to actually access them. The
new system uses a simple array of function pointers that can be set to
custom hooks by tools that need this (based on ideas from Andre Poenitz).
This also covers qt_startup_hook (similar problem), and the Qt version
number that Andre had asked for.
Change-Id: I2c3e7950fd49b1b1d04176be34c2fff3293981b0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Correct links and fix typos, remove obsolete documentation,
fix some snippets, mark some classes as internal.
Change-Id: I9a3266605f060783413d32740057a57a820c8929
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes QtQuick key handling not propagating key events beyond the
specific onXPressed handlers, due to erroneously thinking those exist,
when signal spy callbacks are present.
Considering signal spies for isSignalConnected() goes back to 87239ef6 in
Qt4, and seems to be there just due to this code being based on activate(),
where this check obviously makes sense.
Change-Id: Iad41e42a8d3ee2a16a55be7d1a7cdc51484981ce
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When building with debug, all SLOT or SIGNAL macros will
expand to a function call, and then function will call
QThreadData::current(), which will set
QCoreApplication::theMainThread if it has not already been
done. Since Qt Widgets has these macros in the static
initialization of the library, we would register the
Android main thread as the main thread of Qt, which would
mean that the actual application object was created on
a different thread than the main thread. This caused warnings
to appear, and also triggered a race condition which
caused widget applications to sometimes show a black screen
instead of content on startup when run with the OpenGL plugin.
Task-number: QTBUG-35048
Change-Id: Ie8979f5e7cd5662f8d7dd276de9f94f27cc120b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QObject::senderSignalIndex is, combined with ::sender(), the current
hotspot in the QWebChannel which makes heavy use of it in its 1-to-many
QSignalSpy implementation.
This patch optimizes the senderSignalIndex by only iterating over the
linked senders list once, instead of twice. I.e. it first iterated over
it to find the signal index, then again to find the sender to convert
to a method-offset.
Change-Id: Ic86aed0dce891b87b953a6ec2364a81695bd4876
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
According to docs DynamicPropertyChange event should be sent from
setProperty function only when property is added, removed or
changed.
Change-Id: I080a27a4119a63580b03172f4b5b367338c6f440
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When QSignalBlocker was reviewed, move semantics were asked for.
This patch add them.
This makes QSignalBlocker usable as a by-value argument (to transfer
control of signal blocking into a function) as well as as a return
value (to transfer control of signal blocking out of a function).
Change-Id: I714aa2a283bb33dba76e860649e88ed202e913c5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of enforcing the check, we'll simply trust developers to do the
right thing. For one, it's useful to mix libraries during testing
(regression testing, git bisects, etc.). For another, Qt developers are
faced day-to-day with binary incompatibility issues anyway, so this
check is mostly superfluous.
If there's one commit we could be sure that isn't breaking binary
compatibility, that's the "Bump Qt version" commit. And yet that's the
one that would cause the fatal to trip...
Change-Id: I8965f764a6ca1b2d125b42bce7ac6b27e3afc8ac
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Unfortunately the QObject destroyed callbacks for QtQml and QtDeclarative can't
be called in sequence, because if the QQmlData has the ownsMemory bit set, then
the destroyed callback will delete the QQmlData, and the sub-sequent call to
the destroyed callback of qml1 will try to dereference the QQmlData's first bit
(ownedByQml1), which is already destroyed.
This patch fixes that by simply sharing the assumption of the first bit
indicating module ownership (QtQml vs. QtDeclarative) also to qtbase and using
it to distinguish between which destroyed callback function to call.
Task-number: QTCREATORBUG-10273
Change-Id: I2773a31a3e9b3a1c22d1c1f33b2f29f3296cb3cf
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
And that connectNotify and disconnectNotify might be called from
another thread
Task-number: QTBUG-34829
Change-Id: Id118b97b92e9aa085a1d4368282294f90cfb1706
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
As the last line in the QObject destructor, we call setParentHelper(0) to
remove ourselves from the parent. In the process of that we also initiate the
QML parentChanged callback. The first thing that parentChanged callback used to
do (but now does it too late, after 26350b5ceafa0ade1328037f6234a7d288eb8f48 in
qtdeclarative) is to check if the object was deleted and then return. We could
re-introduce the check there, but I think it's cleaner to not bother calling
the callback on a dead object in the first place.
Change-Id: Ia4d43b65a9b3744a451b4c312a2d6f9c0e3b67dc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
The regression was introduced in 5885b8f775
QMetaObjectPrivate::disconnectHelper may unlock the sender mutex. And
while relocking it, we need to make sure to lock the sender and receiver
mutex in the right order. So don't lock the receiver mutex in advance, but
re-lock it for each connection.
Change-Id: I4f6d19791cdcce3693d7f45e7beb6b564fd69277
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When we unlock the mutex, we need to take in account that the Connection
pointed by 'node' may be destroyed in another thread while it is unlocked
Doing 'node->prev = &node' will make sure that 'node' is actually
updated when it is destroyed.
Setting isSlotObject under the mutex is safer and ensure that no other
thread will attempt to deref the object.
The regression was introduced in 5885b8f775
tst_qobjectrace was updated to catch races arising when we are
connecting with function pointers.
Change-Id: Ia0d11ae8df563dad97eb86993a786b579b28cd03
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Qml has a bunch of hooks in QObject, that are callbacks as function pointers
when things happen in QObject. QtDeclarative (Qml1) only needs one callback,
for object destruction. In preparation for allowing both run-times to co-exist,
this patch forks the callback, keeping the "default" variant for QtQml and
having a *_qml1 variant for QtDeclarative. QtQml continues to set the callback
variable for the default and QtDeclarative will set the _qml1 variant.
It is however a limitation that a QObject instance can only be exposed to _one_
engine at a time, and it is not possible to make a transfer. Double exposure
will result in crashes.
This patch alone is not sufficient to fix the bug, the
QQmlData/QDeclarativeData structures in Qml1 and Qml2 need to be extended to
allow distinction at run-time.
Task-number: QTBUG-35006
Change-Id: I3bac023873b5656a8a4f117fe816bafcda77b67d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the two QObjecs are connected and destroyed at the same time, it
is possible to hit a case where QObject::metaObject and QObject::disconnectNotify
is called on a destroyed object.
This patch moves the calls up before the removal of the connection. This
ensure the sender object will have to block on the receivers connection
mutex and can not finish destruction before disconnectNotify is called.
Task-number: QTBUG-34131
Change-Id: I398116fe7bc6a195991aff9961d89a8b0ac8d53c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Default values should have mark-up to denote that they are code.
This commit changes:
-"property is true" to "property is \c true".
-"Returns true" to "Returns \c true".
-"property is false" to "property is \c false".
-"returns true" to "returns \c true".
-"returns false" to "returns \c false".
src/3rdparty and non-documentation instances were ignored.
Task-number: QTBUG-33360
Change-Id: Ie87eaa57af947caa1230602b61c5c46292a4cf4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
- Create a section dedicated to this concept, which is fundamental to
signal/event handling
- Move relevant content from the very broad "Thread Basics" page to the
QObject class ref
- Flesh out existing content, including distinguishing signals from
events
- Address the common misconception that "member" = "child"; this has
been encountered several times in the Qt Project forums
Change-Id: I5e7e6c848596e72c0bb623f8442c8389b81ad9ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qFlagLocation() uses a global char* array to transport source location
information from the connect() side to the metaobject side. The size
of the array is 2 (two), which just about suffices for a single connect()
statement.
Obviously, if more than one thread makes a (_any_) connection at the same
time, the data is useless and, worse, there's a data race.
The non-reentrancy of qFlagLocations() cannot and need not be fixed,
but use a per-thread flagged_locations array in QThreadData so threads
don't disturb each other.
Task-number: QTBUG-3680
Change-Id: If1797c60751f551694def69afee6fbe295bbe2d2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Added Q_DECL_UNUSED for the function used in Q_ASSERT; removed the
functions that really weren't used and added the #ifdef for the
function that was only used under #ifdef.
qmetaobjectbuilder.cpp(93): warning #177: function "priv" was declared but never referenced
qobject.cpp(2349): warning #177: function "check_and_warn_compat" was declared but never referenced
qpathsimplifier.cpp(141): error #177: function "<unnamed>::Rational::isValid" was declared but never referenced
qtextengine.cpp(2584): error #177: function "<unnamed>::QScriptItemComparator::operator()(const QScriptItem &, const QScriptItem &)" was declared but never referenced
Change-Id: I89a140d59211f10ecd88d751f0bcc0ea2fedff7f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This prevents deadlocks in case the destructor re-enters.
(Example: a functor containing a QSharedPointer of a QObject)
This also fixes a leaked slot object in disconnectHelper.
Change-Id: Ia939790e3b54e64067b99540974306b4808a77f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In the qobject.html page, the description of the syntax of Q_PROPERTY
does not include the MEMBER keyword added in Qt 5.1.
But it was well documented in the documentation of the property system.
Merge the two code snipppets.
Task-number: QTBUG-32211
Change-Id: I7b57329c201b6f3bc812155f21dbfb2c6423494e
Reviewed-by: Martin Smith <martin.smith@digia.com>
In QML it is common to connect signals to slots that are implemented as
JavaScript functions. QML used to maintain separate data structures that
mirrored the QObject connection list and kept references to the JavaScript
objects necessary to perform the call on signal activation.
The recent addition of functor based QObject::connect makes it possible
to store this information in QSlotObjectBase sub-class instead, which
eliminates any extra bookkeeping.
This patch adds internal connect and disconnect overloads to QObjectPrivate
that allow for connecting QObject *sender, int signalIndex to a given
QSlotObjectBase and similar for disconnect.
Change-Id: I90f43d13eb95bd884d752484cf4faacc446f4d6a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Fix connection to pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
The current code only use the QMetaObject of the type coming from the
function type to look up the signal id. But if the signal was casted
to a pointer to member function of a derived type, then we also need to
look in the base classes
Change-Id: Ib98fc38f63942946acb34d9f83c100991d58e4e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously it was only mentioned in properties.qdoc
Task-number: QTBUG-18802
Change-Id: Iab23128c1567974154cdcce7412b2e1468bb846a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... when the compiler do not support variadic template
Change-Id: Iec84cad8ece2fc28b0c224872fdd90d30ae60fc9
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
While adding a test case for the new behavior, two issues
with the connectSlotsByName implementation came up:
1. for auto-connected slots that don't exactly match a signal,
a 'compatible' one is searched. There might be more than
one of those. The implementation randomly picks any.
2. The "No matching signal for %s" warning gets printed even for
slots that can never be connected via connectSlotsMyName
anyway (e.g. "on_something"). This is inconsistent.
This fixed both: an explicit warning is printed if more than one
'compatible' signal is found and the "No matching signal for %s"
warning is only printed if the slot adheres to the full
"on_child_signal()" naming convention.
In the process I added comments and changed the code slightly to
make it more readable and explicitly hint at non-obvious behavior.
Change-Id: Icc8e3b9936188d2da8dfff9f0373c8e5c776eb14
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QMetaObject::connectSlotsByName(QObject* o) creates a list of all
children to look for signals that match slots of o. This changeset
simply adds the object o itself to that list.
The motivation is to finally fix the long standing QtCreator bug
QTCREATORBUG-6494. Where executing 'Go to slot...' and choosing
'accepted()' for a simple QDialog named 'MyDialog' will add a
on_MyDialog_accepted() slot to MyDialog. That slot never gets
connected. More details may be found in the linked QTBUG-7595.
Task-number: QTBUG-7595
Task-number: QTCREATORBUG-6494
Change-Id: I35f52761791af697eabb569adb5faee6fae50638
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The new QThread documentation now really discourage to reimplement
QThread. But in fact, there are many cases where it is perfectly fine.
And the example given is even a case where using worker object is wrong.
The examle even contains a leak since the thread will never stop and
will even leak.
This changes put back some sentences from before commit
d4ad9dbbf9.
The sample code has been re-writen. Notice how reimpementing run takes
less lines of code, less runtime overhead, no leaks, and also is more
complete than the previous example.
Change-Id: I6cb80826e917dd5ce442ccad2572ec692ccb25ab
Reviewed-by: Andre Somers <andre@familiesomers.nl>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Reviewed-by: Debao Zhang <hello@debao.me>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRegExp and QRegularExpression are totally independent, therefore
using two different defines is the right thing to do.
Also, document the new define in qfeatures.{txt,h}.
Change-Id: Ice4826ea543f4b22f1cc27bf31ed6e043d0c43b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
When disconnect()ing through a QMetaObject::Connection, if the
QObjectPrivate::Connection contains a slot object, deref it, so
that it will be destroyed before the next run of cleanConnectionList.
Previously, a copy of the functor passed to connect() was kept until
QObjectPrivate::cleanConnectionLists was called (by adding a new signal,
or the sender was destroyed), even after a successful call to
disconnect(). That is, we were keeping that copy allocated without
any good reason.
Change-Id: Ie6074ea797df1611cb995dec07c5b5a742360833
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The QObjectPrivate::Connection refcount was not decreased
when disconnect()ing, therefore it was kept alive by the
owning QMetaObject::Connection object.
This removes a leak in case the QMetaObject::Connection
survives the sender object, after a successful disconnect().
Change-Id: Ie2ea59b269a0e589ae23c1457df7533be77c0797
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure we always emit the destroyed() signal before
we delete our children. This wasn't working correctly
for QWidget based classes, as the QWidget destructor
deletes all children itself.
Task-number: QTBUG-24672
Change-Id: Iecdff3489196271177edfeba1c4a2c5800e255af
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
There are more opportunities in QtCore and the rest of Qt to make signals
private instead of public. This is a test-dart to see if there is any
reason not to do this.
It would be nice to make QObject::destroyed private, but as it has a
default argument it would be source incompatible to anyone connecting
to the SIGNAL(destroyed()) instead of SIGNAL(destroyed(QObject*)).
Currently the function-pointer-based connect syntax does not accept
a functor (or lambda) with a different number of arguments than the
signal. Olivier says a fix for that might come in 5.1, but for now
the qfiledialog2 test is changed to not use that anymore.
Also, the function pointer for a private signal can not be assigned to
a local variable, so the qmetamethod test is changed to not do so
anymore.
Change-Id: Iaf776b822f9ba364f2c184df0c6b23811da56e44
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This allows to fold the deref() and the destroy() operations into one,
destroyIfLastRef().
The member variables were renamed since there's now a member function
of the same name (ref()).
Change-Id: Ib94416d9e658065bbf5d3711ecafaf0eb063af17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Widget examples were moved into a widgets subfolder, but
qdoc references were not updated.
Change-Id: Id2a4573e723745b9827c664c852807d6116f8f6d
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
In C++, the compiler creates extra functions and data for classes
with virtual functions. This can lead to "virtual function bloat":
http://www.boost.org/doc/libs/1_47_0/doc/html/function/misc.html#id1382504
This is especially true when the number of instances is of the same
order of magnitute as the number of derived classes, such as is
common with type erasure techniques.
One such case is the QSlotObjectBase hierarchy, which this patch
tackles.
The mechanics of this optimisation are simple: re-implement the
virtual function call mechanism by hand, with function pointers.
But we go one step further and collapse the vtable into a single
pointer to a function that implements all three currently-defined
operations, swtching on an 'int which' argument. This even allows
us to extend this in a BC way, should that become necessary later,
by adding a new Operation and using the void** argument to
transport arguments, if any.
This approach was inspired by:
Ulrich Drepper: How To Write Shared Libraries, Section 2.4.4
http://www.akkadia.org/drepper/dsohowto.pdf
Also move the QSlotObjectBase hierarchy out of QObject so as not
to export all the derived classes.
This was pointed out in review by Thiago.
Results (Linux amd64, GCC 4.8-pre -O2 -std=c++11, stripped):
size tst_qobject*
text data bss dec hex filename
523275 21192 48 544515 84f03 tst_qobject (old)
507343 13984 48 521375 7f49f tst_qobject (new)
relinfo.pl tst_qobject*
(old) tst_qobject: 473 relocations, 0 relative (0%), 240 PLT entries, 240 for local syms (100%), 0 users
(new) tst_qobject: 323 relocations, 0 relative (0%), 238 PLT entries, 238 for local syms (100%), 0 users
Change-Id: I40ad4744dde8c5c29ef62ed2d82d4b1ede178510
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qdoc manual currently claims that the command must stand on its own line.
The change follows the consistency with the rest and how the example looks like
inside the qdoc manual for this command.
Change-Id: I6b653dc95cf9d84e4adf32220dace5d313678419
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
method_relative_ is unsigned, so we can't store a -1 in it.
qobject.cpp(434): warning #68: integer conversion resulted in a change of sign
callFunction_(0), method_offset_(0), method_relative_(-1)
^
Change-Id: If8bf3835590ef2c26b9ca5010d638aa84675ff62
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is a simplified port of KDTools' KDAB_SET_OBJECT_NAME.
It simply assigns the variable name as the objectName of
a QObject, uic-style. It uses a small helper function so
that it works on references as well as pointer variables.
QLabel label;
QLabel *pLabel = new QLabel();
Q_SET_OBJECT_NAME(label);
Q_SET_OBJECT_NAME(pLabel);
Change-Id: I25fec0c90f33249a3ea5d2dd622ab708019fd101
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Copy-and-paste error; the doc was based on QObject::receivers.
Change-Id: I4f6ce716d388328e0345e8457cbc99fff323ce41
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Similar to QAbstractDeclarative::receivers. This hook will allow
QObject::isSignalConnected(QMetaMethod) to return true when there are
QML-managed connections.
It's important that the hook is called from
QObjectPrivate::isSignalConnected(uint), since QML calls that
function.
Change-Id: I9c5e42f2b3e7f985af02905985a3a47101cdee05
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Fix all remaining places where Q_EXPORT_PLUGIN2
was being used in the documentation.
Change-Id: I7be67b83c18545d0e74f250b4b26583444b01909
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This also changes the qtdeclarative-specific QMetaObject::activate()
overload to not take a methodOffset argument, since it's no longer
needed.
Change-Id: I4f7ece9f43339f3327419598c032e48fb37b97f0
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Use this to store the loop-level counter needed by QCoreApplication
when determining when it is safe to delete an object.
This removes the hack to hijack the QEvent::d pointer (even though
the pointer is unused).
Change-Id: I91c0b1aa00235ec6e13feb30bf928e56d2f80026
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Another step towards getting rid of the class method offset
computation in QMetaObject::activate().
Since QMetaObjectPrivate::signal() is private API, this also
required adding a testlib dependency on core-private (and
getting rid of the duplicated QSignalSpyCallbackSet struct).
Change-Id: I0d830f35392a6b44fc321c5285877ec0bf437100
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
First step towards getting rid of the signal_absolute_index variable
from QMetaObject::activate() (which requires computation of the
class's method offset).
This also required changing the implementation of the public function
senderSignalIndex() so it still returns an index in the full method
range.
Change-Id: I58571eb3c8099ea5b673682872c53875f5ea8c13
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
computeOffsets() was unnecessarily computing the method index, when
only the signal index is needed.
Change-Id: Id682d4447ba283a44cf0ea15cc47bd30edccb57b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In preparation of changing the implementation to return an index in
the signals-only range, not all-methods range.
Change-Id: Ib743a4bc9da27ad776ade262b215ebf988e7ab28
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The desired meta-object is already stored in a local variable.
Change-Id: I40c7840f07f5dbd67110e2f7d5bb618cbb269047
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move runningTimers, eventFilters and objectName data members to
ExtraData. Saves 12 bytes per QObject for 95% of use cases
(QObjectPrivate goes from 76B -> 64B).
Change-Id: I5648c89f65a7be3ea51bd703ee8a9dcff6222c3c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Roberto Raggi <roberto.raggi@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This allows QML to emit signals without having to built lazily created
metaobjects.
Change-Id: If8068fb3cb35d79dc8f3ef79253d9c2eb7c93205
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This change allows us to delay creating the actual meta object
until it is actually required.
Change-Id: I1c4a4226bd82fa606b206dd60322f49b49c32463
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This completes the transition from connectNotify(const char *) and
disconnectNotify(const char *) to the new QMetaMethod-based
functions.
Removed the old connectNotify autotests and renamed the
connectNotifyMethodXXX autotests to connectNotify, since there is
no longer any ambiguity about which overload is being tested.
Change-Id: Icf108a80177155f21bb73c165fb8ab5d4e997bc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is now an actual NOTIFY signal for this property, and the callback
is no longer necessary.
Change-Id: I664714e22e607c747f144250cfb78de8c1d28686
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is much more performant than calling QObject::receivers(const char*)
Can be used instead of connectNotify in some cases.
Change-Id: I19e0933f678f171f515d9a0f69f0ad4fb7d894b4
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: Icf22986cd5f6fd086518c78a7d56e6cadfe9f5f6
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaObjectExtraData was added when support for QMetaObject::newInstance
was added. One needed a place to put the pointer to static_metacall in
the QMetaObject.
But as we break binary compatibility, one can change the size of
QMetaObject, and put everything back inside QMetaObject's own structure.
Meaning it is not required anymore to have one QMetaObjectExtraData
instance per QMetaObject anymore.
Change-Id: If0b8f586cbaf633eed10045adee3ba3366826c86
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Preparation for removal from declarative now that a proper NOTIFY
signal exists.
Change-Id: If0acb73b73d17c49dc8de211d95ecd1e8e80ff1b
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Don't lock if there are no receivers.
Change-Id: I922fad10436adeb27aa4f193cc0dcbaa3f0c0f1e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Return 0 rather than false; remove extra Q_D().
Change-Id: I3dac733c3fae27c76790f09fd6b63356767a0363
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This change fixes most qdoc errors in QtCore. There are about 900 left.
The main thing this change does is moving documentation from qtcore from
/doc/src to /src/corelib/doc.
Other issues resolved are mis-use of qdoc commands.
Change-Id: I002d01edfb13575e8bf27ce91596a577a92562d1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
Unfortunately, qdoc is too simple to understand any pointer to member
function syntax.
(the ::* token is not even tokenized. And even if it was, it would be a
difficult way to hack that into the parser. (there is already an ugly
workaround for non-member pointer to function hat works by having '(*'
as a token,but the same hack is not possible for pointer to member function))
So I just put verbatim 'PointerToMemberFunction'
Also remove the obsolete mention that Qt::UniqueConnection is not supported
in that overload. It is now. (And it even contradicts the previous
paragraph)
Change-Id: I8fc9544808c9a462b0f11ccea406e2e33dee15b1
Reviewed-by: Geir Vattekar <geir.vattekar@nokia.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
The default type when Qt 3 support is enabled. Same as
AutoConnection but will also cause warnings to be output in
certain situations.
Change-Id: I64bf3c39a740afb716820bfd3173936fda213f4a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For Qt5 we no longer want to support the older revisions due to the
dual codepaths that must be maintained, and because the format of the
meta-object data is quite different in revision 7.
The dual codepaths have been replaced by asserts that indicate the
revision in which the feature was introduced, and the older-revision
fallbacks have been removed.
It's not possible to build code generated by moc that has
revision <= 6 with Qt5 because the type of the
QMetaObject::stringdata member changed from const char * to const
QByteArrayData *. For the same reason it's not possible to build a
dynamic meta-object generator targeting revision <= 6 with Qt5.
Hence, too old meta-objects will be caught at compile time, and the
code will have to be ported to generate revision 7 (e.g., by running
Qt5's moc on the original class declaration).
Change-Id: I33f05878a2d3ee3de53fc7009f7a367f55c25e36
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This actually involved tiding up QObject sources a little bit
to clearly separate QString / QRegExp overloads of findChildren.
The corresponding qFindChildren overload for MSVC 6 compatibiltiy
was *not* added.
Change-Id: I84826b3df9275a9bda03608a5b66756890eda6f8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QObject::QSlotObjectBase instance given as argument to
QObject::connectImpl was not dereferenced in case of an unsuccessful
connection.
Change-Id: I206b14e986690c027aafc2593762d85dc619e0e6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QObjectPrivate::Connection time life should be controlled by
QMetaObject::Connection handle.
Change-Id: Ie7fcd950082a3e6cebc29ecc0622007470914edb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Similarly to change id I2f429fa7ef93bd75bb93a7f64c56db15b7283388, the capability
to arbitrarily alter the encoding of literals is very destructive, especially in
a world with libraries and plugins.
Change-Id: If0d4cd8dcf89792e39c1984cbde6b036cebfc02f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QDoc now has support for Doxygen style commands for italics, bold
and list items. This change applies that change in QDoc to the
actual documentation.
Task-number: QTBUG-24578
Change-Id: I519bf9c29b14092e3ab6067612f42bf749eeedf5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Move definition of ExtraData to the implementation file.
As a side effect, we need to include qhash.h
in some other places.
Change-Id: I8bb4ec0940ae51c7d6961c9a51adb80fd444e1e3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Up to and including meta-object revision 6, string data have been
stored as 0-terminated C-style strings, that were made directly
accessible as const char pointers through the public API
(QMetaMethod and friends).
This commit changes moc to generate an array of QByteArrayData
instead, and adapts the QObject kernel accordingly.
Generating an array of QByteArrayData (byte array literals)
means that the strings can now be returned from public (or private)
API as QByteArrays, rather than const char *, with zero allocation or
copying. Also, the string length is now computed at compile time
(it's part of the QByteArrayData).
This commit only changes the internal representation, and does
not affect existing public API. The actual (C) string data that the
byte array literals reference still consists of zero-terminated
strings. The benefit of having the QByteArrayData array will only
become apparent in the upcoming meta-object data format change, which
changes the format of property and method descriptors.
Support for the old meta-object string data format was kept; the
codepaths for old revisions (6 and below) will be removed in a
separate commit, once all the other meta-object changes are done and
affected code has been adapted accordingly.
Task-number: QTBUG-24154
Change-Id: I4ec3b363bbc31b8192e5d8915ef091c442c2efad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
No supported compiler defines it, and it was not used consistently
so it didn't work anyway.
Change-Id: Icc9e911e22daaedaee3d9316c15d19be26cd2e72
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some objects expect connectNotify to be called in order the signal to be
emitted.
Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We're trying to deprecate these, so don't use them anymore.
The inline uses of these have been left intact, for the moment. Inline code will
need to create their own non-inline allocation methods (for future-proofing to
allow alterations in how e.g. individual containers allocate)
Change-Id: I1071a487c25e95b7bb81a3327b20c5481fb5ed22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
3rdparty event dispatchers are impossible to write without using the
internal API QAbstractEventDispatcherPrivate::releaseTimerId(). Fix
this by having each QObject keep track of its own timer ids, and
release them when they are no longer used. As a side effect, this
makes the QObjectData::pendTimer bit unnecessary.
This also removes the QObjectData::inThreadChangeEvent hack that the
event dispatchers used to avoid releasing timer ids when moving timers
to a new thread.
QBasicTimer becomes even more low-level. It cannot use
QObject::startTimer() anymore, since we do not have a way to call
QObject::killTimer() from QBasicTimer::stop(). QBasicTimer uses the
QAbstractEventDispatcher interface directly, and releases the timer id
explicitly as well when stopping the timer.
This change also fixes some rare timer id "leaks" when destroying or
stopping timers after a thread has exited and destroyed its event
dispatcher (the timer ids would never be released when no dispatcher
exists).
Globally destructed QObjects that have running timers may try to release
their timer ids after the timer id freelist has been destroyed. This
commit accomodates such objects by avoiding the null dereference in
QAbstractEventDispatcherPrivate::releaseTimerId().
Change-Id: I2d7cd8221fae441f3cf02b6c0b4bc16063834d00
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timer type will control the accuracy of the timer. By default, all
timers are CoarseTimers, which allows for +/- 5% interval adjustment.
PreciseTimers will not have any interval adjustments, VeryCoarseTimers
will have intervals adjusted to full second resolution.
Use QTimer::setTimerType() or the QTimer::singleShot() overload to
specify the type.
QObject::startTimer() now takes a Qt::TimerType argument which defaults
to Qt::CoarseTimer. QBasicTimer::startTimer() gets an overload that
takes a Qt::TimerType argument. The argument is unused for now, since
the QAbstractEventDispatcher interface needs to change (done in a
separate commit).
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: I3100da5aa1fe17ec30b8644897d0fe6ec4a07f52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
For some strange reason "Object::method ..." was printed, without
the leading Q.
Change-Id: I10b99e8aa8730e4020d15b3e04a01004bade76c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QWeakPointer is superior and preferred.
Remove QMetaObject::addGuard(), QMetaObject::changeGuard(),
QMetaObject::removeGuard(), and QObjectPrivate::clearGuards().
Implement QPointer using QWeakPointer<T> instead. This changes the
behavior of QPointer in 2 ways:
- During destruction of a QWidget. Previously, the destructor of QWidget
would reset all QPointers so that they would return zero when destroying
children. Update tst_QPointer to account for this change.
- When constructing a QSharedPointer to take ownership of an object
after a QPointer is already tracking the object. Previously, the shared
pointer construction would not be affected by the QPointer, but now
that QPointer is implemented using QWeakPoiner, constructing the
QSharedPointer will cause an abort(). Fix tst_QSharedPointer by
removing the use of QPointer in the objectCast() test.
These behavior changes are documented in the QPointer class
documentation and in the changes file.
Change-Id: I92d0276219c076ece7bcb60f6e1b9120ce4f5747
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The union in QObjectPrivate of declarativeData and
currentChildBeingDeleted shouldn't use wasDeleted to determining the
meaning of the unioned pointer. Instead, add
QObjectData::isDeletingChildren, set that in
QObjectPrivate::deleteChildren(), and only use the
currentChildBeingDeleted member when the parent's isDeletingChildren is
set.
This solves aborts seen in autotests when widgets are deleting window
children. The abort comes from QWeakPointer on the parent in the child's
close event handler (the abort checks that wasDeleted is not set).
Change-Id: I1a58449159d4a5312aad8ba12e559d05d6c43d93
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
After commit 79f675a1e0, the connect and
disconnect callback API effectively becomes useless. Now that these
callbacks cannot/do not, it makes little sense to keep the backdoors
added for Qt Jambi support.
Remove them for now. Should the Qt Jambi team want/need to port to Qt 5,
we can re-add them, possibly designing a better API for doing so as
well.
Change-Id: I6209a1d647d683c979d5294b632b8c12c0f9f91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is sent when the object's name changes.
tst_moc must be updated since the method count of QObject has changed.
The test assumed that there were 4 invokable methods in QObject. The
new signal is the 5th, which breaks the test's assumptions. Fix this
as well.
tst_QObject must be updated since the
QObjectPrivate::isSignalConnected() method only supports the first 64
signals. With the addition of this new signal, sig61() in the test
becomes the 65th signal, and will always appear connected now.
Task-number: QTBUG-13999 (related)
Change-Id: Ie87893c71a231fafa7ccf2f16102238a7be8327a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This commit also improves the related documentation a bit.
The test is copied from the test with the old syntax, but all the
connection statement are changed to use the new syntax
Change-Id: Ia5630ca4335b9f8ca6d724ae3c8750d6f0804d8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Move from each implementation of QObject::connect to
QObjectPrivate::addConnection the code that adds the
QObjectPrivate::Connection* to the sender's list.
Change-Id: I665af016d5e6673eb0e9c06965e5deed50454b28
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This add an overload to disconnect which is symetrical to the new
syntax of connect.
It is possible to diconnect connection like this:
QObject::connect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
QObject::disconnect( sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
This overload only work with pointer to member function, and not static
functions or functors.
The test is copied from tst_QObject::disconnect(), just
changed the syntax of the connection and disconnection
Change-Id: Ia8f819100cb12098e32877522b97b732b1e676a8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The overloads taking a range were previously used for cloned signals
(ones that had default arguments). Commit
919b723088b8617b202b92d80b8d0983e4fd9500 changed how cloned signals are
handled, making the from,to overloads obsolete.
The 3 argument activate() overload that does not take a QMetaObject
argument was marked obsolete by the same commit, but considering that it
is used by our autotests, I've decided to keep it and not mark it as
obsolete anymore.
Change-Id: I631ce84dce156dec68cf26e10787cb35e3f50e18
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaCallEvent now can handle a pointer to QSlotObjectBase
Change-Id: I94da1e68ce9bb1fd96a9ae013a389552eb625faa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to the old connection syntax, you can now connect using function pointers.
connect(sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
You can connect also to functor or C++11 lambdas
The connections are now type safe (no more problems with namespaces
or typedefs). Implicit type conversion is also supported.
The new syntax forces us to change the meaning of signal form
protected to public, in order to be able to access the signal's
address everywhere
The way it works is by introducing new overload of QObject::connect
that take function pointer as parametter. Those new overload are template
function, that are implemented inline. The actual implementation is
in QObject::connectImpl which take a QObject::QSlotObject* as parametter
for the slot. That slot object contains a virtual function which call
the slot which has to be implemented in the header as it depends on the
template parametter. So the internals of QObjectPrivate::Connection
will store this QObjectSlot* in order to be able to make the call.
You can read a full description here:
http://developer.qt.nokia.com/wiki/New_Signal_Slot_Syntax
History of commits before it was imported on gerrit:
https://qt.gitorious.org/~ogoffart/qt/ogoffarts-qtbase/commits/qobject_connect_ptr
Thread on the mailing list:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000796.htmlhttp://lists.qt.nokia.com/pipermail/qt5-feedback/2011-September/001248.html
(The discussions on the mailing list were about trying to find a
solution that do not need making signals public, but no user friendly
solution was found)
Note: support for QueuedConnection, and the symetric QObject::disconnect is
added in another commit.
Qt::UniqueConnection is not supported yet in the new overload.
Change-Id: I67d08436b0720e7f2992be9f7e34770960fa58fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
From a bool to a handle to to connection.
Also added a new overload of disconnect that disconnect a handle
This is required because with the new syntax taking lambda or functors,
it is the only way to disconnect a connection (as it is impossible to
compare functors)
The new return value is QMetaObject::Connection, it is a wrapper around
the internal QObjectPrivate::Connection.
QObjectPrivate::Connection is now reference counted.
tst_qglobal.cpp:
This test set up an internal callback, and the callback do not set any
proper connection handle (and tbh, it would be hard for it to do so).
So the returned QMetaObject::Connection is invalid, and ok is false
(Internal callbacks are only used for jambi and should probably be removed)
Change-Id: I111626fb4f47efc4db5e2ea5bff9da15f08fea7b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
queued_activate() sets the argumentTypes atomic pointer on first use, which
mixes a load, memory initialization, test-and-set-ordered, and
another load. The explicit memory ordering is necessary to ensure
that the memory stores happen in program order.
Change-Id: Id1f8641f9cd081ce81aa8e830692f7af8261e84b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_WS_QPA is the only active code path after merging
refactor, other Q_WS-macros are no longer used.
Enable compilation without -qpa.
- Remove Q_OS_MSDOS, Q_OS_OS2
- Remove Q_WS_QWS
- Remove/replace definitions/conditionals of Q_WS_XX
- Remove qpa branches from profiles
- Replace Q_WS_MAC by Q_OS_MAC
- Replace Q_WS_MAC && !Q_WS_QPA by
Q_OS_MAC && !QT_NO_CORESERVICES
- Similarly in profiles: mac:contains(QT_CONFIG, coreservices)
- Replace Q_FS_FAT by Q_OS_WIN
Change-Id: Icce5a6c55b052c8f72b3b979ddf31a4f388ea9c9
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
create() is symmetric with destroy().
Also rename the internal methods and fields to be
consistent (qDeleteHelper already had the "right"
name, though!).
This change will allow us to use construct() and
destruct() for something else: Placement new-style
allocation (QTBUG-12574).
The old construct() is still kept for now, until
the other repositories have been updated to use
create().
Change-Id: Iceb184af6cffcb0a634359cfc3516c718ba0c2f5
Reviewed-on: http://codereview.qt-project.org/6342
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Most of these changes are search-and-replace of d->ref ==, d->ref !=
and d->ref =.
The QBasicAtomicPointer in QObjectPrivate::Connection didn't need to
be basic, so I made it QAtomicPointer.
Change-Id: Ie3271abd1728af599f9ab17c6f4868e475f17bb6
Reviewed-on: http://codereview.qt-project.org/5030
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For property notify signals, QtDeclarative can manage connections
in a more special case - and more performant - way. This patch
adds a callback hook so that QtDeclarative can intercept signals
being emitted by declarative objects.
Change-Id: I72554e80df0a4257da65d81cc1c5db88a11446a4
Reviewed-on: http://codereview.qt.nokia.com/3363
Reviewed-by: Martin Jones <martin.jones@nokia.com>
Since we now have QBasicMutex as a POD, we can simplify the mutexpool.
This remove the call the the Q_GLOBAL_STATIC and some others tests that
are taking CPU cycles when activating a signal.
The QMutexPool class itself can't be simplified because its mutex are
recursive mutexes, and the size is dynamic. also it is harder to get all
the mutexes initialized to 0.
Change-Id: Ie781655635907d2ad620eb189099cba14638414f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2171
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
And added a POD QBasicMutex. (QBasicMutex* can safely be
static_cast'ed to QMutex*)
The d pointer is not anymore always a QMutexPrivate.
If d == 0x0: the mutex is unlocked
If d == 0x1: the mutex is locked, uncontended
On linux:
if d == 0x3: the mutex is locked contended, waiting on a futex
If d is a pointer, it is a recursive mutex.
On non-linux platforms:
When a thread tries to lock a mutex for which d == 0x1, it will try to
assing it a QMutexPrivated (allocated from a freelist) in order to wait
for it.
Change-Id: Ie1431cd9402a576fdd9a693cfd747166eebf5622
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
This has two direct benefits:
1) compiles regardless of -fno-exceptions: no need for #ifndef
QT_NO_EXCEPTIONS or QT_TRY/QT_CATCH
2) no QT_RETHROW either, which means the backtrace of an application
crashing due to an uncaught exception will include the actual throw
point.
Change-Id: I18e5500e121bfa81431ef16699df96d962794f0e
Reviewed-on: http://codereview.qt.nokia.com/663
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Some functions (such as QObject::moveToThread) did not keep
the event ordered by priority.
And because qUpperBound is used to add events, that mean new
events would not be inserted in order.
Task-number: QTBUG19637
Change-Id: I38eb9addb1cdd45b8566e000361ac6e5f1f2c2b8
Reviewed-on: http://codereview.qt.nokia.com/733
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
Thiago Macieira
J-P Nurmi
Frederik Gladhorn
Jani Heikkinen
Olivier Goffart
Volker Krause
Shawn Rutledge
Friedemann Kleint
Thomas McGuire
Eskil Abrahamsen Blomfeldt
Milian Wolff
Tomasz Olszak
Marc Mutz
Simon Hausmann
Allan Sandfeld Jensen
Sérgio Martins
Sze Howe Koh
Jerome Pasion
Dario Freddi
Sergio Ahumada
Alan Alpert
David Faure
Axel Waggershauser
Giuseppe D'Angelo
Christian Stenger
Lars Knoll
Mitch Curtis
Stephen Kelly
Samuel Rødal
Iikka Eklund
Frederik Gladhorn
Michael Brasser
Andy Nichols
Lars Knoll
Laszlo Papp
Jeremy Katz
Kent Hansen
Bradley T. Hughes
Martin Jones
Aaron Kennedy
David Faure
Casper van Donderen
Debao Zhang
Giuseppe D'Angelo
Jędrzej Nowacki
João Abecasis
Robin Burchell
Teemu Katajisto
Jason McDonald
Robin Burchell
Alan Alpert
Friedemann Kleint
Thiago Macieira
Olivier Goffart
Samuel Rødal
Gunnar Sletta
Olivier Goffart
David Boddie
Thiago Macieira
Sergio Ahumada
Paul Olav Tvete
Jyri Tahtela
Jørgen Lind
Qt by Nokia