Add HTTP2 support in QNAM - QHttp2ProtocolHandler + aux. classes.
[ChangeLog][QtNetwork] Added support for HTTP/2 protocol
Task-number: QTBUG-50956
Change-Id: I3a119cfbb1fb3118d9003225f5e54b46ae2829b6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Exclude sections of code that relate to 'Connecting' state from being
executed in 'Connected' state.
Change-Id: I5e7d28b74dcd9c87c37b4871cc90afc200b2dab9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace it with QL1S in QStringBuilder expressions
and in overloaded functions.
Replace patterns 'QString::number() + QStringLiteral'
and 'QStringLiteral + QString::number()' with
QString::asprintf.
Saves some text size.
Change-Id: Ib39b2332264dfc3df04e77f2c101b47a1030cef4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These expressions only work because they contain no non-parenthesized
commas and an int literal is last.
Fix by wrapping only the integer literal in Q_(U)INT64_C.
Change-Id: I6b8e508b6c7c022f4b3342f65c26aab89ce17702
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise socketDescriptor(), localPort(), localAddress(), peerPort(),
peerAddress(), and peerName() remain uncleared until close() is called.
This could take place when the connection is closed by the remote
endpoint or the user calls disconnectFromHost(). After disconnecting,
connection parameters are no longer valid, while I/O device is still
opened and may have pending data for reading. Usually, the user reads
all incoming data and closes the device independently.
Change-Id: Ic898851c39137faf64019949910f0d94ebb79df7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
FreeBSD < 10 doesn't have the LLINDEX macro either in net/if_dl.h, so besides
OpenBSD yet another condition to declare the LLINDEX macro for systems where
it isn't present does make it more complicated than replacing its usage with
the actual code.
Change-Id: I7e8ef3e265564526e05ec3115f9fa765d399f045
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new modular configuration system requires one global
header per module, that is included by all other files in
this module.
That header will later on #include the configuration file
for Qt Network. For now it defines the Q_NETWORK_EXPORT
macro for this library.
Change-Id: I9c45d425baf881c431ed71fd457c7feb2c123855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
1) To describe a protocol version we should use an "ordinary" name,
not use the values out of the QSsl::SslProtocol enum.
2) Say that we support the latest stable TLS version (1.2, not 1.0).
3) Fix a statement about which protocol is the default one.
Change-Id: I18732914d55060a0c3920f7082f986c262a71ded
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
1. QSslSocketBackendPrivate::transmit can invalidate SSL context
causing subsequent SSLWrite or SSLRead calls to fail; these report
errSecParam (as null context is an invalid parameter) spuriously,
when we should rather report the cause of invalidation. The OpenSSL
backend can trigger this when it aborts connection during an SSL
handshake, on an sslErrors signal. As transmit() emits readReady(),
a directly connected slot can trigger the same problem if it aborts or
closes.
2. If during peer verification (and in checkSslErrors) we disconnect
on sslErrors signal, peer verification must be considered failed and
should not continue handshake/set connectionEncrypted.
Task-number: QTBUG-52975
Task-number: QTBUG-53906
Change-Id: Iacd3b489a4156e25ef3460ace40d21f34a946bed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Where accept4() is used, NetBSD offers paccept() as a replacement function.
Modify check for using accept4() and use paccept() on NetBSD.
See http://netbsd.gw.com/cgi-bin/man-cgi?paccept++NetBSD-current
and http://reviews.llvm.org/D12485
Change-Id: I9b3ecba5f3afad6c357d3f7b8f89589bf313e273
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The declaration and definition of the forwarding functions for PSK
differed which leads to link errors with some versions of openssl.
Change-Id: I40410f62a584c5dbd2acf5c90422e1243514f8fd
Reviewed-by: Richard J. Moore <rich@kde.org>
The declaration and definition of the forwarding functions for PSK
differed which leads to link errors with some versions of openssl.
Change-Id: Ic62d87dbd33a77f3c114f0a597a6c0858b22174a
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: André Klitzing <aklitzing@gmail.com>
DEFINEFUNC macro is not enough, RESOLVEFUNC also required.
Change-Id: Ia73c3fa62b594765a74d2ecabb8e109b62ea6027
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit adds a new class called QNetworkDatagram that encapsulates
the IP packet header and UDP/IP stack metadata along with the actual
payload data. It can be used for both receiving as well as sending data.
It's called QNetworkDatagram so it can be used by QSctpSocket too, when
that lands.
[ChangeLog][QtNetwork] Added QNetworkDatagram class, along with new
function receiveDatagram in QUdpSocket that returns it and an overload
to writeDatagram that can accept it.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca467f425ddc3d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
Replace substring functions that return QString with
corresponding functions that return QStringRef where
it's possible.
Change-Id: Id7f70e5bd72c91ed210ec463aad1d84fe3b40c15
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
If a user's code, attached to sslErrors signal, calls abort/close
or disconnectFromHost but our SSL socket was configured not to verify a peer,
no need to continue handshake after calling checkSslErrors
(and finally crashing on invalid 'ssl' pointer).
Task-number: QTBUG-53906
Change-Id: I7f185511d278f9d6f16e7d6c5ba424707141459c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Contrary to our initial assumption, this should be added by default to
allow full functionality during development by default. Developers need
to decide which capabilities to use during the publishing step already,
hence improve DX by adding this.
Task-number: QTBUG-50847
Change-Id: I36e0214f7bcf8610d31851eea172aba3944cfd99
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There is no need for the functions to assert. By returning false they
show that something went wrong and the error will be handled
gracefully.
Change-Id: Ib026adf5c6fb23b5e6b5598533caec3b3669220c
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
If runOnXamlThread returns anything but S_OK an exception is thrown
which might cause the application to terminate. So we give the lambda
a reference to hr and check that reference instead of runOnXamlThread's
return value for errors.
Change-Id: I1188ea720c63f6fdf43400f2f3ff928b72afc58e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
runOnXamlThread should always return S_OK (causes exceptions otherwise)
so we need another way of error reporting to the outside (hr reference).
A failed hr is reported to the outside (of the lambda) and interpreted
as an unknown error.
Specific error cases like the given address not being a local address
or the given address being in use already are handled inside the lambda.
The specificErrorSet variable is necessary in these cases so that the
error is not overwritten by unknownError.
Change-Id: I198d66fe97726d5127bf31e50c7eff3363d5259c
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
On ABIs where quint64 is aligned on 8-byte boundaries (such 32-bit
Windows and all 64-bit systems), there was a padding hole of 4 bytes
between QHostAddressPrivate::a and the anonymous union. If we move the
member to after the union, there is no hole anymore.
That operation causes the tail padding to grow from 3 to 7 bytes. Since
we also don't need full 32 bits for the protocol, we can shrink the
structure by 8 bytes on those architectures and by 4 bytes on 32-bit
Unix systems.
Change-Id: I461e9fc7199748faa187ffff1415d6601a7bd777
Reviewed-by: hjk <hjk@theqtcompany.com>
QSslSocket was not transmitting existing data after finishing its
handshake if it had to download a certificate on Windows.
Task-number: QTBUG-48816
Change-Id: Ie35b5f4ca0f6c3c40fe2394166eb31f9f72dac55
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Richard J. Moore <rich@kde.org>
Makes things symmetrical with the windows configure and cleans
up the logic in ssl.pri
Change-Id: I4a373afe78e904de7d04baea38c250ff0c9d5062
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The two functions are merged and also renamed.
handleConnectionEstablished indicates that the
operation succeeded, but that is not necessarily
the case.
Change-Id: I66a4181a5693353fc9507785a6e6bbb8d5300a4b
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This merge also blacklists a flaky tst_QGL::clipTest test on
OpenSUSE 13.1.
Conflicts:
src/network/socket/qnativesocketengine_winrt.cpp
tests/auto/opengl/qgl/BLACKLIST
Task-number: QTBUG-53133
Change-Id: I14b431aa5a189b7dd1d3e2dfff767d15df20fde3
This is needed for generic property access to work correctly.
Change-Id: I88cd40238a8caf8df6c71b22e2fa0c4d5655a88a
Reviewed-by: Richard J. Moore <rich@kde.org>
Add the /etc/ssl default path to the list of certificate directories for OpenBSD.
Change-Id: I13dff6a219e2c848501ec9bf191160a48f919515
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix compiling under OpenBSD by using Q_OS_OPENBSD define for missing
include file and adding required typedef. Obtained from OpenBSD ports
patches for qt-5.5.1 at
http://cvsweb.openbsd.org/cgi-bin/cvsweb/ports/x11/qt5/patches/
Change-Id: Ide223bffb6b116e8341d0eb39329af4d7a0be6a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
OpenBSD does not have EPROTO and LLINDEX.. LLINDEX is only a macro
pointing at sdl_index so use the FreeBSD macro from <net/if_dl.h> as a
a workaround.
Change-Id: Ic3ccecc1b671bb28d14da83ba915ec3fcad2657d
Reviewed-by: Richard J. Moore <rich@kde.org>
This allows us to pass pointers to storage that is not an array of
uchar, which it hardly ever is.
Change-Id: Ifea6e497f11a461db432ffff14490d2c2df21906
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This class is no longer needed now that SecureTransport is the default
SSL backend on iOS. It also uses NSURLConnection, which is deprecated
on iOS and tvOS and completely prohibited on watchOS (in favor of
NSURLSession).
[ChangeLog][Important Behavior Changes] The NSURLConnection backend of
QNetworkAccessManager has been removed, since SecureTransport is the
default SSL backend on iOS and is enabled by default. This means that
building with -no-openssl -no-securetransport will no longer provide SSL
capabilities on iOS.
Task-number: QTBUG-45031
Change-Id: I86b774fa369c7d76197bfc0504d5ad234bb47e5c
Reviewed-by: Richard J. Moore <rich@kde.org>
Only the OpenSSL backend is supported right now.
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
set custom Diffie-Hellman parameters for QSslSocket-based servers.
Change-Id: I50148873132cd0ec7e414250b107b6b4cbde02ea
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Since 5.7 we can write downloaded byte arrays directly to the
QIODevice's internal read buffer without any memcpy/alloc overhead.
This makes various other buffers redundant, so remove them.
Task-number: QTBUG-45926
Change-Id: I577af70f856c9b852b7569a0070ae2bcbb4faaae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
If the client has responded to an earlier auth fail sensibly, further
use of the socks connection probably means we have fresh credentials.
So treat AuthenticatingError like Uninitialized. This makes
tst_QNetworkReply::authenticationCacheAfterCancel(*+socksauth) work
again.
Task-number: QTBUG-51545
Change-Id: I237ca5a3194b093cc6480dd33aa7709b7b584941
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
A port was being assigned to qint16 instead of quint16.
Change-Id: I9414e2dcca52beab1bc17ef61cfff56db8ab83a0
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
If no read was established before (no IO pending) the function
will fail. In this case there is no need to assert though.
Change-Id: Iaa18e4124389783fc2b8363a85c60a308903a713
Task-number: QTBUG-53424
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
As the functionality is not available for udp sockets trying to
call it will cause a crash on socket close.
Task-number: QTBUG-53424
Change-Id: Id80b36a248d12bf360135b2374c0a0efdab3a1f0
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Remove the extra write buffer from QLocalSocketPrivate and use
QIODevice's new internal write buffer.
Change-Id: I4297774ee89da2df59782adae8b804296e7f3301
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use QRingBuffer::append instead of an explicit reserve + memcpy.
Change-Id: I237d1e43a377e156c148e89e410e15e400e1e426
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Using multiple concurrent requests can cause a delay between a socket
closing and getting deleted. At that point the state was closingDown,
but not wasDeleted yet. Especially on slower arm devices, callbacks are
done from another thread causing synchronization issues.
Hence closingDown needs to be synced and handleReadyRead needs to have
more criterias to return early to avoid invalid access crashes.
Easiest to reproduce is heavy scrolling on the mapviewer example when it
downloads a huge amount of tiles and cancels those requests when not in
view anymore.
Change-Id: I442b6243bbefb3af938b6b1b3739a6a85b4887c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
[ChangeLog][QtNetwork][QAuthenticator] Fixed crash when
comparing a initialized QAuthenticator with an uninitialized
QAuthenticator.
Task-number: QTBUG-53338
Change-Id: Ib8b732b9c65c02ee542885e5d6fe9bd1589a6b1a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Port the last remaining Q_FOREACH user in QtNetwork to
C++11 range-for and mark the library as Q_FOREACH-free,
using QT_NO_FOREACH.
Change-Id: I8977f151e3575422fc1154677e035274c018d66f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Force overloads which relate to UDP or listening to fail with a
'UnsupportedSocketOperationError' error code.
Change-Id: I057c47864ee1d9c95b413edfda977dd0607844cb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Examples in binary packages now directly match the install path.
Change-Id: Ic1487bc766cfd3b0a0a340cc4ae4ba49d953eaa6
Task-number: QTBUG-52953
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MSVC 2013 does not like QStringLiteral between brackets.
Change-Id: Ic42f80b7a3abbb48df3d0e222bd5c868045a0ded
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Some Windows kernels return a v4-mapped QHostAddress::AnyIPv4 as a
local address of the socket which bound on both IPv4 and IPv6
interfaces. This address does not match to any special address and
should not be used to send the data.
To allow handling of the local addresses properly, replace it with
QHostAddress::Any.
Already tested by tst_qudpsocket.
Task-number: QTBUG-52714
Change-Id: Icb7cb75f48cd7ec9b0a9dfaf861ffe0d3093e20d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by replacing them with C++11 range-for loops.
This is the simplest of the patch series: Q_FOREACH took a
copy, so we do, too. Except we don't, since we're just
catching the return value that comes out of the function
(RVO). We can't feed the rvalues into range-for, because
they are non-const and would thus detach.
Change-Id: I42c9c44d948ab1512a69d42890187bc3cf2d7e58
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The printf-style version of QDebug expands to a lot less code than the
std::ostream-style version. Of course, you pay in type safety (but
compilers warn about it these days), you cannot stream complex Qt
types and streaming QStrings is awkward, but in many cases you
actually improve on readability.
But the main reason is that something that's not supposed to be
executed under normal operation has no business bloating executable
code size.
This is not an attempt at converting all qWarnings() to printf-style,
only the low-hanging fruit.
In this second part, replace
qWarning() << "" << non-QString
with
qWarning("..%.", non-QString).
QString (and QUrl etc) have special escaping handling when streamed
into QDebug, so leave those alone. They also seem to expand to less
code than the qPrintable() alternative, so there's no reason to
replace them.
Saves 2KiB, 3.4KiB, ~750b and ~450b in text size in QtCore, Gui,
Network and Widgets, resp., on optimized GCC 5.3 AMD64 builds.
Change-Id: Iae6823e543544347e628ca1060d6d51e3b04d3f4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][QtNetwork][QSslSocket] TLS PSK ciphers are possible in server sockets.
Task-number: QTBUG-39077
Change-Id: Iaa854a6f50242deae5492f2e4759c727488995f5
Reviewed-by: Richard J. Moore <rich@kde.org>
ALPN and NPN should not be mutually exclusive, it's possible that our
peer does not support ALPN but does support a protocol we can negotiate
via NPN. So use them both.
Change-Id: Ib3c8066d89117efab55ac8435cc2c806c7a1ece0
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Q_GLOBAL_STATIC does the thread-safe protection for us. And who said we
could only use non-POD types? We can just use a boolean!
Change-Id: Ifea6e497f11a461db432ffff1449b0a88d75d194
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add a named comparison method that allows the caller to
specify in how far a translation between IPv4 and IPv6 should be
performed before comparing.
Change-Id: I9aeffcd4539a6c0537c083c4553357b22167df3f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For CoW types, prefer const methods to avoid needless detach()ing.
Mark predictNextRequest() as const, because this method
does not modify the object.
Change-Id: Ic94e2b31445ece46ab1423bf5b5f4e66d9a5b6ca
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It's been unused ever since it was added in
bba86a01c9.
Change-Id: I6d5bc27a0744d37f873245c92a4e6ba8fc90c062
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Instead of checking for the presence of a NUL,
then splitting the QByteArray at NUL separators
just to join the parts with different binders,
simply use replace('\0', ...).
Change-Id: I0e0453b80f63cffce4a0ff152120ece754211166
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
The function QObject::children() returns by const-reference,
so its result can be passed to range-for without further changes.
Change-Id: Ic330a8e110d6dd5624b9e328ece2a614d5c71e4f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: I47c5308a6ad220b4c5495e55a3b0d38547bfa8d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... (or trivially marked const) local variables or
parameters, by replacing them with C++11 range-for
loops.
Also ported one indexed loop.
Change-Id: Idddcac48ce7527b1ea674671ceb9aaf4d31fb42e
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Allow sockets in bound state to wait for notifications.
Task-number: QTBUG-52449
Change-Id: I5c02bd61db68abca652312d4d59023963b05b3c5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
a != A || a != B looks suspiciously wrong.
Found, unfortunately, only by Coverity (CIDs 152247, 152249).
Change-Id: Ia7ec810dde2a3a33ae6fc5644a4eebf279dcffe8
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Found by Coverity, CID 11351. If we check 'if (backend)' at one line,
not clear why we do 'if (bakcend->canResume())' two lines above without any test.
Also, 'delete backend' is noop if backend is nullptr, so ...
even this 'if (backend)' is ... not needed.
Change-Id: I7a46ce04baeb9251debb7b246954911df58880ca
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Timur Pocheptsov
Alex Trotsenko
Anton Kudryavtsev
Marc Mutz
Thiago Macieira
Edward Welbourne
Ralf Nolden
Lars Knoll
Liang Qi
Giuseppe D'Angelo
Friedemann Kleint
André Klitzing
Maurice Kalinowski
Oliver Wolff
Martin Porcelli
Jake Petroules
Volker Krause
Topi Reinio
Mikkel Krautz
Edward Welbourne
Jesus Fernandez
Mike Krus
Joerg Bornemann
Simon Hausmann
Lorn Potter
Felix Braun