This is needed to make sure the output directory is in the correct
place somewhere under tests, rather than in $prefix/bin.
Change-Id: I98afa9c0a7517a8a10866b4c626bd4c4d2fd214f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When running Qt autotests on a developer machine with a high
resolution, failures occur due to either some widget becoming too
small, some rounding fuzz appearing when Qt High DPI scaling is active,
or some test taking screenshots failing to deal with device pixel
ratios != 1 in the obtained pixmaps.
It is not feasible to adapt all tests to pass on high resolution
monitors in both modes (Qt High DPI scaling enabled/disabled). It
should be possible to specify the High DPI setting per test.
Previously, it was not possible to set the Qt High DPI scaling
attributes since they must be applied before QApplication
instantiation.
Enable this by checking for the presence of a static void initMain()
function on the test object and invoking it before QApplication
instantiation.
Prototypically use it in tst_qtimer and to turn off High DPI scaling for
tst_QGL.
[ChangeLog][QtTestLib] It is now possible to perform static
initialization before QApplication instantiation by implementing a
initMain() function in the test class.
Change-Id: Idec0134b189710a14c41a451fa8445bc0c5b1cf3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There are two cases:
In a BlockingQueuedConnection, QMetaCallEvent doesn't allocate memory
and instead passes already existing pointers through. A QSemaphore
is used to serialize data access between threads. So the constructor
taking a QSemaphore can be simplified to only accept an existing arg
array.
In a QueuedConnection, QMetaCallEvent needs to make deep copies of
the arguments, and memory needs to be allocated based on the number
of arguments. The previous code put the burden of memory allocation
on the code generating the event, while the memory was free'd by
~QMetaCallEvent. Instead, make it QMetaCallEvent's responsibility
to allocate and free the memory as needed, and adjust the code
generating QMetaCallEvents.
We can allocate the memory for types and pointers to arguments in a
single block, starting with the space for the array of void*, followed
by the space for the array of integers to avoid byte alignment issues.
By pre-allocating the space that's needed by three arguments, we can
avoid all mallocs for the majority of QMetaCallEvents.
Until this change has propagated through qt5.git, we need to keep the
old API that is still used by QtDeclarative around. Once QtDeclarative
has migrated to the new API, it can be removed.
Change-Id: Id7359ffc14897237ea9672dabae9ef199a821907
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change makes the PREFIX parameter a required parameter if the
target does not specify a default. This way the behavior is clear when
reading the code: add_qt_resource() without PREFIX means it must come
frmo the target.
Change-Id: I79024e70e7b4d32a5164b93aa08ec9ff409b2d39
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Makes the conditions nicer to look at.
Change-Id: If07b4f96892e459a7e7a6a4f541311ebda11b1a8
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
If unset QT by default has value: "core gui". This patch adds this
behavior by pre-defining the value in the root scope.
qmimedata CMakeList.txt was re-generated.
Change-Id: Ib8b6064bc46c72d829e0077d09f21bbfb494e137
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
CMake doesn't support removing subdirectories therefore one need to
convert all removal to conditional adds. The resulting code doesn't
win a beauty contest. That is because handle_subdir works on already
processed strings which means it doesn't have access to the boolean
operations. As such it can not minimize the expressions, but it works
and in the most simple cases it is pretty good.
The patch re-generates CMakeLists.txt under tests/auto/corelib/kernel
excluding qcoreapplication, qmetatype, qmimedata, qobject, qtimer,
which are suffering from unrelated problems, like for example Gui,
pthread linkage issues.
Change-Id: I18a02f6eda7a3b41b1313211c8bc9ce277bb67be
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Somehow missed these during my first iteration.
Change-Id: Iaef0ab84d9320a98f49ec071c93cd6f2907d92c3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Windows has a problem relating to cross-DLL variable relocations: they
are not supported. Since QMetaObject's link to the parent class is done
via a pointer, every QMetaObject in a DLL or in the EXE that derives
from a class from another DLL (such as QObject) will be dynamically
initialized.
This commit changes the meta object pointers in QMetaObject::d from raw
pointers to a wrapper class SuperData, which is almost entirely source-
compatible with the pointer itself. On all systems except for Windows
with Qt 6, it's binary compatible with the current implementation.
But for Windows with Qt 6, this commit will store both the raw pointer
and a pointer to a function that returns the QMetaObject, with one of
them non-null only. For all meta objects constructed by moc, we store
the function pointer, which allows the staticMetaObject to be statically
intialized. For dynamic meta objects (QMetaObjectBuilder, QtDBus, QtQml,
ActiveQt), we'll store the actual raw pointer.
[ChangeLog][QtCore][QMetaObject] Some internal members of the
QMetaObject class have changed types. Those members are not public API
and thus should not cause source incompatibilities.
The macro QT_NO_DATA_RELOCATION existed in Qt 4 but was called
Q_NO_DATA_RELOCATION and only applied to Symbian. It was removed in
commit 24a72c4efa ("qglobal: Remove
symbian specific features").
Task-number: QTBUG-38876
Fixes: QTBUG-69963
Change-Id: Id92f4a61915b49ddaee6fffd14ae1cf615525e92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QLinkedList is still used in several tests. Add exceptions for
these subdirs.
Change-Id: I50ccd2a0892129d4a47aa4e2400211690da9a82d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There's like three pages of this when compiling the test :)
Change-Id: I923f2c4f5eff7c709977026666cc5b2a2cbfaa72
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced the usages of deprecated APIs of corelib by corresponding
alternatives in the library code and documentation.
- Modified the tests to make them build when deprecated APIs disabled:
* Made the the parts of the tests testing the deprecated APIs to
be compiled conditionally, only when the corresponding methods are
enabled.
* If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76491
Task-number: QTBUG-76539
Task-number: QTBUG-76541
Change-Id: I62ed4a5b530a965ec3f6502c6480808f938921aa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... and schedule it for removal in Qt 6.
This appears to have come to some fame on the internet, so better add
a deprecation warning before we remove it in Qt 6.
Change-Id: I42d91d933f47dfd2d8d54c92358e9e46ced6bf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The check to disable the test was the one for QRegExp. This patch fixes
that.
Change-Id: I8783f582998cdd6ffe5dc5dafb3d53d56cd91213
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix deprecation warnings - replace qFindChild/Children() with
QObject::findChild/Children() and replace some 0 with nullptr.
Change-Id: If2f01d12fa91d09d98a61f73b0449a6773ac93db
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Silence a warnings flood about qVariantFromValue(), QString::null
and QWeakPointer::data().
Change-Id: I73347190c0fa396b39b9efd00447cf24e48259a0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QMetaObject::newInstance returns a QObject, thus it's not possible to
create a new instance of a Q_GADGET using this function. Previously, we
returned a non-null QObject pointer for such scenarios, which then
leads to crashes when one tries to use it. Now, we check whether the
meta object inherits QObject's meta object, and error out early
otherwise.
Change-Id: I7b1fb6c8d48b3e98161894be2f281a491963345e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTimer::singleShot is optimized for zero timeouts when using the API
taking a string method name. This optimization was not used for the API
taking a PMF or functor. This patch adds it, making the various API
calls behave similarly from a performance point of view.
The approach taken here requires a QObject context object. If none is
available, e.g. a nullptr was passed explicitly, or the
QTimer::singleShot(O, Functor) API was used, the optimization could
not easily be applied. This is not only bad from a performance POV,
but also poses as a potential source for heisenbugs: Using the
different API versions of QTimer::singleShot would use different code
paths internally, which then would not ensure the expected slot call
order. This problem actually existed already when mixing the
string-based slot syntax with PMF/functors in the QTimer::singleShot
API.
This patch overcomes this hurdle and fixes all of the above: When we
encounter a 0ms single shot timer, and no QObject context object is
available, we fall back to the main thread, or create a temporary
QObject for any other thread. The updated and extended benchmark
shows that this is still a significant performance improvement
over using a timer:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.48 msecs per iteration (total: 748, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
7.20 msecs per iteration (total: 720, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
6.79 msecs per iteration (total: 679, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
6.92 msecs per iteration (total: 693, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.34 msecs per iteration (total: 735, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.90 msecs per iteration (total: 690, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
7.46 msecs per iteration (total: 747, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
6.70 msecs per iteration (total: 671, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
13.75 msecs per iteration (total: 1,376, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
7.05 msecs per iteration (total: 706, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.70 msecs per iteration (total: 670, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
6.58 msecs per iteration (total: 658, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 20977ms
********* Finished testing of qtimer_vs_qmetaobject *********
Without the change to qtimer.cpp, the results are:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
112.84 msecs per iteration (total: 11,285, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
115.62 msecs per iteration (total: 11,563, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
110.81 msecs per iteration (total: 11,082, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.04 msecs per iteration (total: 704, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 746, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
118.42 msecs per iteration (total: 11,842, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
119.35 msecs per iteration (total: 11,936, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
130.96 msecs per iteration (total: 13,096, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
8.08 msecs per iteration (total: 808, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.79 msecs per iteration (total: 680, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
7.49 msecs per iteration (total: 749, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 153995ms
********* Finished testing of qtimer_vs_qmetaobject *********
Additionally, this patch adds a unit test to verify that the slot call
order for 0ms single shot timers is followed while mixing the various
API versions. It fails without this patch but passes now.
Finally, another test is added to verify that using QTimer::singleShot
before a QCoreApplication was constructed is still working properly.
Change-Id: I0d6211554b6198cb3e527be9ec3adc572b1b54ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QVariant] Fixed a bug that caused isNull() to be
true after downcasting a QObject* payload using convert().
Fixes: QTBUG-73196
Change-Id: Ifda15952f873d7142c95609b69ac424bbf16b723
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove remaining handling of missing support for rvalue refs.
Change-Id: I78bab8bccfeeb9c76f464f345874364a37e4840a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QMetaObject] Non-copyable lambdas can now be used
with invokeMethod(). For consistency reasons, the functor object is
now always moved.
Fixes: QTBUG-69683
Change-Id: I66ff5e21d6d1926f0f7c5f8c304bed1a90b69917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Blacklisting did not work as blacklist should have contained osx
instead macos
Change-Id: Ifd76a38d371ccce545eb5df030aaa819b00a5b48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All types that can be trivially copied and destructed are by definition
relocatable, and we should apply those semantics when moving them in
memory.
Types that are trivial, are by definition not complex and should be
treated as such.
[ChangeLog][QtCore] Qt Containers and meta type system now use C++11
type traits (std::is_trivial, std::is_trivially_copyable and
std::is_trivially_destructible) to detect the class of a type not
explicitly set by Q_DECLARE_TYPEINFO. (Q_DECLARE_TYPEINFO is still
needed for QList.)
Done-with: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iebb87ece425ea919e86169d06cd509c54a074282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is not reason why it should be kept in secret. Not having public
accessor forces a user code to keep a copy of the id. Visible for
example in QML (QQmlValueType).
Change-Id: If0de65fb8d91bcd50880c66b5f87c68f6d888dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some people suggested the later, so let's have a second look at it
before it's too late.
Although I was in favor of the former I'm now having second thoughts.
connectTo() is meant to only be used in classes which have a clear dominant signal,
but there are rare classes that have two (example: QAbstractButton::toggled, QAbstractButton::clicked).
QAbstractButton::connectTo() would be ambiguous if we ever wanted to add these shorthand connects
to QtWidgets
Change-Id: I198ad3326d31dcf89b9c47a299124572ee7b11b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Synced QMetaObjectBuilder::MetaObjectFlag with the MetaObjectFlags enum
from qmetaobject_p.h. Also added a few comments for Qt 6.
Change-Id: Ieccd5cf8d512a6bf7256b2f4db88d45662774536
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This feature is needed to register complex types (e.g. Q_GADGETS) at
runtime, using a single constructor method and added type parameter.
Without having the type id available to the Constructor it is impossible
to specialize behavior, thus requiring separate constructors for each
type. Generating these separate constructors at compile time is easy,
but not at runtime.
[ChangeLog][QMetaType] QMetaType can now register constructor for a set
of dynamic types.
Change-Id: I6071271d0e157864594dd07b4bc3a0abbeb15a44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They have been blacklisted on windows and macOS previously. Now failing
on WinRT as well.
Task-number: QTBUG-69962
Change-Id: I30ca23005b082e820ee896fa36a8984a1536ad6b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
They have a separate type that we can't recognize directly, but we
can check if we can recognize the QFlags<T> form, though we have to
add a lot of template-conditions to avoid triggering QFlags static
asserts.
Change-Id: I00853682c5376dd3cc411ff151f47bce2389e277
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Adds an enumName to QMetaEnum to carry the name of the enum since for
flags that doesn't match the name of the Qt type, but is needed if the
flag is scoped.
Change-Id: I1c0f77eb9e40e6fd1eb6a59bea77caf0f33fcf43
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Alexandru Croitor
Daniel Smith
Friedemann Kleint
Marc Mutz
Volker Hilsheimer
Simon Hausmann
Jędrzej Nowacki
Sona Kurazyan
Thiago Macieira
Giuseppe D'Angelo
Edward Welbourne
Samuel Gaist
Christian Ehrlicher
Shawn Rutledge
Tobias Hunger
Liang Qi
Qt Forward Merge Bot
Milian Wolff
Allan Sandfeld Jensen
Lars Knoll
Timo Lang
Konstantin Shegunov
Joerg Bornemann
Hugo Beauzée-Luyssen
Juha Karjalainen
Olivier Goffart
Tony Sarajärvi
Christian Andersen
Tor Arne Vestbø
Oswald Buddenhagen
Jesus Fernandez
Ville Voutilainen
Ulf Hermann
Kari Oikarinen
Timur Pocheptsov
Anton Kudryavtsev
Sergio Martins
BogDan Vatra
Heikki Halmet
Oliver Wolff