All remaining pieces are gone, configuration included.
Relevant CMakeLists and configure.cmake were regenerated.
Fixes: QTBUG-76502
Change-Id: I667b5da7e3802830d236d50b5e9190c2ee9c19e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QSocks5SocketEngine::simpleConnectToIMAP() is flaky. It may be
useful to log the socket error, to provide more info in case the
test fails again.
Change-Id: Ia5518dce13fd9da1fa5bfb3d5cf3a52a908b8698
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
0. The recent patch fixed the case when we can suddenly (meaning from
a particular version of Darwin) bind on a port number 1. Unfortunately,
it's not the case for IPv4 and while fixing one test case, the patch broke
another - so this patch addresses this.
1. Unfortunately, binding on a fixed port 1 on macOS made the test flaky
- we run this 'bind' several times and sometimes OS thinks port is already
bound (because of the previous test case) - closing the connection seems
to fix this problem (thus this patch do this also).
2. As a bonus a proper resource management added (aka RAII) where we would
previously leak a socket in case some QCOMPARE failed.
Fixes: QTBUG-81905
Change-Id: I90c128a332903bb44ab37de4775ca00d390dc162
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Apple changed on macOS 10.14 (Mojave). Windows has always allowed.
Fixes: QTBUG-81905
Change-Id: I572733186b73423b89e5fffd15f12fee3f03c055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Conflicts:
tests/manual/rhi/hellominimalcrossgfxtriangle/CMakeLists.txt
Hopefully final merge from wip/cmake, and then all cmake changes
should target dev directly.
Change-Id: I29b04c9b0284e97334877c77a32ffdf887dbf95b
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
This reverts commit 0de6c26ac1.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I67dbb5cada25da473bdd02e71b1e2d9bd03f039e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
bind on port 1/82 is now success, in QTcpSocket's test things are more
broken: changing the test row makes the test flaky with port not available
due to the previous test case.
Task-number: QTBUG-81905
Change-Id: Iaf1b5457fa3961a4f6bc92b79aa4668a8359136e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QLocalSocket::error is overloaded as a signal and an accessor (for the
error reported by the signal). This means connecting to the signal using
a pointer to member function would require ambiguity resolution. We
deprecate the old accessor (to be removed in Qt 6) and introduce a new one -
'socketError'.
[ChangeLog][Deprecation Notice] QLocalSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Iab346f7b4cd1024dee9e5ef71b4b7e09f6d95b12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qabstractsocketengine.cpp was changed to explicitly include its header
moc file, which works with AUTOMOC, but doesn't with qmake.
The header file needs to be explicitly listed in the HEADERS variable.
Amends 2a1fc7b835.
Change-Id: I9d31288d1f1eb2310679a7e685bd7ea458a77920
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Note the following bigger things that had to be done:
Handle GSS library / feature with a new custom find module.
Implement rudimentary support for relocatability (does not currently
handle extprefix).
Change-Id: Ic6cd27dda7ebca9829f51cb42ea76fff6d1767ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since the direct .moc inclusion was added for cmake, we need to make the
_p.h visible to qmake via HEADERS so that qmake can also see this.
Change-Id: I042544856fe28e46b978d3b5938fbff8614367be
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The requirement to separate debug and release DLLs on Windows stems from
the Visual Studio C run-time library appearing in two different variants
(debug and release) and not mixing well. It's possible to perform builds
without optimzations and with debug symbols while linking against the
release version of the C run-time, but at the same time the debug
version of the run-time brings other developer visible advantages.
MinGW on the other hand does not have this distinction, does not ship
with separate DLLS and does also not require the VS C runtime library.
Therefore we do not need this separation for MinGW, which means that our
packages can be reduced in size and application developers wishing to
debug their applications do not have to use debug builds of the Qt
libraries or run into Qt internal debug code.
Task-number: QTBUG-78445
Change-Id: Idf588606091298dc44262c4c89e689df18d34747
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The minimum supported version is Windows 7. Remove
QOperatingSystemVersion::WindowsVista added by
b0cd007335 and replace with "true"
wherever it was used.
Change-Id: I08c0208467b655a921b6773f77d8bc099be69031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is needed to make sure the output directory is in the correct
place somewhere under tests, rather than in $prefix/bin.
Change-Id: I98afa9c0a7517a8a10866b4c626bd4c4d2fd214f
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The direct use of pthread_yield() requires pthread linkage, which --
according to the cmake docs -- is best done by using CMake's
Threads::Threads target and the -pthread compiler flag preference.
Change-Id: Iacbd7dfce3ee2f792cea7f58d52b6b8ba8a84b18
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
QT_SOURCE_TREE is a variable that is set in qtbase/.qmake.conf.
In qtbase, it's used throughout various
projects to find cpp sources when building standalone tests (among
other things).
Everything works fine with qmake, because even if qmake is invoked
on the tests subfolder, qmake searches up the source directory tree
until it finds a .qmake.conf file, and uses that.
When building qttools with qmake, the qdoc project expects
to have a QT_SOURCE_TREE value, but it's not actually set in the
qttools/.qmake.conf file, so the generated include paths that use
that value are incorrect. Curiously the build still succeeds.
Now in CMake land we replaced QT_SOURCE_TREE with
CMAKE_SOURCE_DIR, but that does not work properly when doing a
standalone tests build, because the project in that case is the
tests one, and not the qtbase one, so configuration fails in a
developer build when trying to configure some private tests.
So far I've found that only qtbase actively uses this value.
A temporary fix is to save the qtbase source directory into a
QT_SOURCE_TREE variable inside the generated
BuildInternalsExtra.cmake file.
The pro2cmake script is changed to handle presence of QT_SOURCE_TREE
in a qrc file path. This is handled by finding the location of a
.qmake.conf file starting from the project file absolute path.
This is needed to stop the script from crashing when handling
the mimedatabase test projects for example.
The change also regenerates the relevant failing test projects, and
thus standalone tests (when doing developer builds aka private_tests
enabled) now configure and build successfully.
Change-Id: I15adc6f4ab6e3056c43ed850196204e2229c4d98
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The previous code handled only some error codes, in a very inefficient
way, for some code paths. This change standardizes error handling using
a helper function that maps winsock WSAE* codes to Qt error codes.
The test for connecting to unreachable hosts or ports is now more
generic, and enabled on Windows, where it passes in local tests,
but dependency on network configuration still makes it fragile,
so ignoring some failures without completely skipping the test.
[ChangeLog][Network][Windows] Correctly emit errors when trying to
reach unreachable hosts or services
Change-Id: Icaca3e6fef88621d683f6d6fa3016212847de4ea
Fixes: QTBUG-42567
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Mårten Nordheim
Leander Beernaert
Qt Forward Merge Bot
Sona Kurazyan
Alexandru Croitor
Lars Knoll
Alexander Akulich
Friedemann Kleint
Timur Pocheptsov
Liang Qi
Thiago Macieira
Tor Arne Vestbø
Simon Hausmann
Daniel Smith
Volker Hilsheimer