QTRY_IMPL() exercises QTRY_LOOP_IMPL() twice, once directly, the
second time via QTRY_TIMEOUT_DEBUG_IMPL(); and QTRY_LOOP_IMPL()
deliberately doesn't bound its scope (e.g. with the canonical
do{...}while(0) trick) so that the latter can access its local
variable. Unfortunately, this means the local's declaration in the
second use of QTRY_LOOP_IMPL() shadows the first. So enclose the first
in braces to bound the scope.
Fixes: QTBUG-77297
Change-Id: I849bfe0b8abfb517ed3e783abf86c602163db137
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add overloads for qCompare() for QStringView making use of the fast
formatting helper introduced by 94aa350621
for int.
Speeds up the bug report example by a factor of 3..4.
Task-number: QTBUG-38890
Change-Id: Icc706618b2f1d23b37d354a04d4e1d1cc4b5aee3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Fix else after return/break
- Fix use of int as boolean literal
- Use range-based for in some cases
- Avoid copies by using const-ref
- Remove unnecessary null-check before delete
Task-number: QTBUG-69413
Change-Id: I69f46e6deaa55ef70a8b3a61e6539c79a64aaa23
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that all our supported compilers know char16_t, we no longer need
QStringViewLiteral, whose only purpose in life was to turn u"" into
L"" for MSVC < 2015.
Change-Id: I25a094fe7992d9d5dbeb4a524d9e99e043dcb8ce
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
"mac" scope in qmake actually means all mac platforms,
just like "darwin", aka macOS, iOS, watchOS, etc.
Regenerate corelib, gui and testlib after this modification.
This is a requirement for the iOS port.
Change-Id: I029c7e907d13f6ec31816a08602a5930f9ac16a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
- Remove virtual from functions declared as override
- Use " = default" for trivial constructors/destructors
- Remove all special functions from QTestLog
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I812b8116e5b4c927e4e5cee44e63bc705385d866
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I620e40a277dc2b20b0ec26fc32577e66b0456bb3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: Iba0834dc89cbfc215acc5873f31fa6eeed74177d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Factor out a helper template formatting the QCOMPARE failure message
delaying the formatting of the parameters with toString() and use that
for float, double, int and unsigned. This removes the need to always
format and allocate strings for the operands even in the success case,
speeding up the QColor test from 3.3s to 700ms (Windows/release).
Task-number: QTBUG-38890
Change-Id: I999484765bdaed921d3fc35f35a9fbbcd82a9704
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When accidentally running a test doing screen-grabbing
with High DPI scaling active, sizes of the obtained pixmaps
can differ due to the device pixel ratio. Add a check to make that
clearer.
[ChangeLog][QtTestLib] Comparison of QImage, QPixmap now checks for the
device pixel ratio.
Change-Id: Id8d5187e99c565c44a7bfb8b9cfb09737815fb15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the resource path 'base' was relative it would enter condition 3) in
qFindTestData() and it would actually find the nonsensical "://data" as a
viable candidate. We don't want to enter that case, but rather enter the
subsequent ('Try resources') case
Change-Id: I1928ba02c941e23fee4fec9052a1981e46fa59b7
Task-number: QTBUG-73512
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
You can create multiple instances of QBenchmarkGlobalData as the ctor
is public.
The qmltest plugin does create a static one, but only conditionally
assigns it to the singleton pointer. On shutdown the plugin is removed
and the QBenchmarkGlobalData::current should only be reset by the dtor
if it's actually pointing to the same object.
Change-Id: I616c1ccf6f7a00abf1de342094da88481510bc7b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Apply Fixits by Qt Creator with some amendments.
Task-number: QTBUG-69413
Change-Id: I366cca6e5755719e8241e76774af6be2b5312627
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were some changes done in pro2cmake, so regenerate the main
qtbase modules to keep everything up to date.
Some new whitespace got added.
Some special cases were removed (ZLIB).
Some opengl code got moved around.
Some plugin types were added.
And some other minor things.
Change-Id: Ie8cba4a9aa6b4b163c39d6cf546ea9e0bfc05c01
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In order for test lib to locate the file requested via QFINDTESTDATA, it
needs the build directory of the test (for example
$builddir/tests/auto/foo/bar) and __FILE__ expanding to a path to the
source relative to this build directory.
With ninja, __FILE__ is a path that is always relative to the top-level
build directory, not the per-test case one. Therefore the path
resolution in testlib fails.
To accommodate this, add_qt_test() now always sets QT_TESTCASE_BUILDDIR
as well as the newly introduced QT_TESTCASE_SOURCEDIR, which, as an
absolute path, removes the need to use __FILE__.
Change-Id: I16c2b0001e38162e6da9fdb1a61f4f8ce634fe46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of generating .html page for each file in an example
project, generate links to code.qt.io, under the correct
path and branch, where the user can browse the example source.
Store all URLs under QT_INSTALL_DOCS/config where other qt5
submodules can access them. The repository name appears in
the URL, so we cannot define a single URL for all modules.
Task-number: QTBUG-74391
Change-Id: I63d4d6d2c352877797b1ee8e057d48c0cd789bff
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Each module that has publically declared classes or structs
that are not meant to be documented is given a dontdocument.qdoc
file to tell qdoc that these classes are not meant to be
documentented. Then qdoc will not print warnings about missing
\class comments for these classes and structs.
Change-Id: I9195f0b546032e1c7642c9da34d85a0a4a9bfb08
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This patch updates the code from the deprecated QRegExp class to
QRegularExpression.
Task-number: QTBUG-25485
Change-Id: I946790f50c6b14787bca31771de5e3a0d5fefe4c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTimer::singleShot is optimized for zero timeouts when using the API
taking a string method name. This optimization was not used for the API
taking a PMF or functor. This patch adds it, making the various API
calls behave similarly from a performance point of view.
The approach taken here requires a QObject context object. If none is
available, e.g. a nullptr was passed explicitly, or the
QTimer::singleShot(O, Functor) API was used, the optimization could
not easily be applied. This is not only bad from a performance POV,
but also poses as a potential source for heisenbugs: Using the
different API versions of QTimer::singleShot would use different code
paths internally, which then would not ensure the expected slot call
order. This problem actually existed already when mixing the
string-based slot syntax with PMF/functors in the QTimer::singleShot
API.
This patch overcomes this hurdle and fixes all of the above: When we
encounter a 0ms single shot timer, and no QObject context object is
available, we fall back to the main thread, or create a temporary
QObject for any other thread. The updated and extended benchmark
shows that this is still a significant performance improvement
over using a timer:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.48 msecs per iteration (total: 748, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
7.20 msecs per iteration (total: 720, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
6.79 msecs per iteration (total: 679, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
6.92 msecs per iteration (total: 693, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.34 msecs per iteration (total: 735, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.90 msecs per iteration (total: 690, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
7.46 msecs per iteration (total: 747, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
6.70 msecs per iteration (total: 671, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
13.75 msecs per iteration (total: 1,376, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
7.05 msecs per iteration (total: 706, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.70 msecs per iteration (total: 670, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
6.58 msecs per iteration (total: 658, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 20977ms
********* Finished testing of qtimer_vs_qmetaobject *********
Without the change to qtimer.cpp, the results are:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
112.84 msecs per iteration (total: 11,285, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
115.62 msecs per iteration (total: 11,563, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
110.81 msecs per iteration (total: 11,082, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.04 msecs per iteration (total: 704, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 746, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
118.42 msecs per iteration (total: 11,842, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
119.35 msecs per iteration (total: 11,936, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
130.96 msecs per iteration (total: 13,096, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
8.08 msecs per iteration (total: 808, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.79 msecs per iteration (total: 680, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
7.49 msecs per iteration (total: 749, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 153995ms
********* Finished testing of qtimer_vs_qmetaobject *********
Additionally, this patch adds a unit test to verify that the slot call
order for 0ms single shot timers is followed while mixing the various
API versions. It fails without this patch but passes now.
Finally, another test is added to verify that using QTimer::singleShot
before a QCoreApplication was constructed is still working properly.
Change-Id: I0d6211554b6198cb3e527be9ec3adc572b1b54ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We may get calls to the MessageTypes-overload of addMessage via e.g.
qSkip, or other functions in QTestLog, so we have to implement the
function.
Change-Id: I9d58c73e93ca918c42448c246c37cc9ae6aa04de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rules of std don't permit us to add an overload for
fpclassify(qfloat16), so we need our own equivalent that we *can*
overload. Deploy it in the few places we use fpclassify().
Extended qnumeric's testing to cover qFpClassify().
Change-Id: Ie5a0a5cc24599d1571404c573d33c682b0d305a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Needed to disable QT_NO_UNSHARABLE_CONTAINERS, as this
triggers asserts.
QMetaType also has some Qt 6 specific code disabled to
get things to compile.
Fix various details in autotests to accommodate for
the changes with Qt 6.
Add a workaround for black lists on macos, where
QSysInfo::productType() now returns 'macos' and not
'osx' anymore.
Change-Id: Ie26afb12a2aac36521472715934a7e34639ea4d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In QCOMPARE, handle NaNs and infinities the way tests want them
handled, rather than by strict IEEE rules. In particular, if a test
expects NaN, this lets it treat that just like any other expected
value, despite NaN != NaN as float16 values. Likewise, format
infinities and NaNs specially in toString() so that they're reported
consistently.
Enable the qfloat16 tests that depend on this QCOMPARE() behavior.
Refise the testlib selftest's float test to test qfloat16 the same way
it tests float and double (and format the test the same way).
This is a follow-up to 37f617c405.
Change-Id: I433256a09b1657e6725d68d07c5f80d805bf586a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- braces on same line as else where applicable
- const where possible
- Same extended logging format for all cases
Change-Id: If0c91f270ce2a9be1d295f42a915900f3b1838cf
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We were potentially adding the Apple test logger multiple times, and we
didn't consider whether the existing loggers were logging to file or not
when circumventing them.
We now don't use the Apple logger if it would touch stderr and some other
logger is using stdout. In the case of no explicit logger being specified
on the command line, we allow the Apple logger to take priority over the
default plain test logger.
Change-Id: I31bbec4f4b3ab84ba9a2be35e8e5db08fee071a7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Removes useless indirection and builds on existing primitives in Qt.
Change-Id: I9fe50b21f5f77fc02566d5f5ff04c3e94c830e81
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The QTest::qCompare() implementations were almost duplicates; pull the
common code out into a templated version. Tweaked the
QTest::toString() specialization for float and double (a macro) and
fixed a bous modifier in double's format.
The doubleComparisons and floatComparisons tests in the tst_float.cpp
selftest shared a large block of tests in common, aside from the
difference of type. Break this out into a templated static function
to save duplication.
This prepares the way for using the same templated code for qfloat16.
Change-Id: I2823fd006910c5ff88335d625d1fa05cb7753513
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With "macos" keyword in place, we can blacklist using that
keyword instead of the old "osx".
Change-Id: Ib7a2f88265271df152320cce8594b8f788b47687
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Replace null and '\c nullptr' with \nullptr in the documentation.
Change-Id: I58934eea06943309ba895833f1991629870ab45b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The counter is just how many tests were blacklisted, regardless of
their success or otherwise. Skipping its increment for BXFAIL is apt
to introduce noise in our tracking of how many tests are blacklisted.
Change-Id: I1dd74e5f6619121c21d8741be7bc4e2d1cb43fa9
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
Enables the use of e.g. QT_NO_DEBUG in compiler flags, -fPIC, passing on of
QT_NAMESPACE, etc. pp.
Dropping a lot of custom code which handled adding imported targets for
the command-line tools (this is all being handled by CMake already).
It needs to be investigated if we need to resurrect
Qt5GuiConfigExtras.cmake.in in one way or the other.
Change-Id: I4fa141b68fddaad4f33e628c59d5d0b3a7b3a096
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Refactor activate(), so that we eliminate almost all
checks for signal hooks in the common case.
Here are the benchmark numbers showing the improvement
for 100M signal emissions
without change with change
string based connect: 3836 3693
pointer based connect: 4571 4510
not connected: 479 433
disconnected: 559 522
Change-Id: I394e6ea5d5bc96e298e8cc0c763eed78c8041876
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
XML expects '.' as the decimal separator, but when using normal
%f formatting we end up depending on the user's current locale.
By using QString::number() we tap into qt_doubleToAscii which
forces the use of the C locale, giving predictable output.
Fixes: QTBUG-73227
Change-Id: I04d1adae2ef079442605e962007e5ce3fce896b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Based on Asmo Saarela's advice (QTPM-686), adapted on advice from
FrogLogic support and converted to a feature so that the selftest and
testlib qmake config can be co-ordinated.
Task-number: QTPM-1385
Change-Id: Icd706f086009e1e08b3f8c5cd553f792402e28c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
With all the headers missing, Creator's clang code model just gives up and
it's impossible to work on testlib in Creator.
Change-Id: I8814264db10992eeec6f45625580f6788d23b56b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Qt for Python users reading the documentation assume that int(0) can
be passed for pointer parameters. Use the newly introduced \nullptr to
disambiguate this.
In a follow-up step, the \nullptr macro can be defined as None
when generating the Qt for Python documentation.
Task-number: PYSIDE-903
Change-Id: I3a45f87175a0668ab5f3f95f0aff409f7e3ef027
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Christian Tismer <tismer@stackless.com>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Qt Test library sources specific to Core, GUI and Widgets modules
were moved around in commit 88867e39b.
The new source locations must be referenced in Qt Test documentation
configuration. The same sources are excluded in their original doc
projects, and the related snippet file is moved over to qttestlib.
The commit also fixes the remaining documentation issues for Qt Test.
Change-Id: Ibe011aa83639e574d647f12bc9e53e618781bce6
Reviewed-by: Martin Smith <martin.smith@qt.io>
* Only import features once
* Move Core specific code into its CMakeLists.txt file
* More consistently use target names like "Core" to
refer to "Qt modules". We tend to require either "Core"
or "QtCore" in places, which I find confusing.
Change-Id: Id54161bc5468412750cb9eb7eeb15de3812e8a09
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I was getting:
Actual (reader.validate()) : <null>
Expected (QCborError::NoError): NoError
Change-Id: Ib47c56818178458a88b4fffd1554f1751f447086
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The qCompare() implementation for double was handling infinities and
NaN the way tests need, but the one for float didn't; it has just the
same need, so apply the same fix. Extends 79493a3ee1.
Change-Id: I8425026acb61d535e449f579b77fdcd609157f7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Macro parameters should always be enclosed in braces when used.
Plain C strings passed in parantheses are interpreted as
const char[], at least by clang-tidy.
Implicitly decaying arrays into pointers should be avoided and
clang-tidy warns about this. Avoid both problems by always static
casting all messages to const char *.
Change-Id: I2be668169bec2823f69af3aa75086a31b0b31938
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was previously using 50ms steps, which was a bad choice for client
code whose total time-out was comparable to 50ms or less. Reduce the
time-step so that we loop several times within the timeout (but make
sure it's never zero, by adding 1ms).
Change-Id: I0428a7741c0741dfb312e40ae1eda900050195ab
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's not actually exercised by anything in our source tree, but is
potentially useful and has been part of the documented public API for
some time. So mention that the caller is responsible for delete[]ing
its return and add a test that exercises it.
Task-number: QTPM-1385
Change-Id: Ifc5284b9eb1b678cf3c9708c681311e874838fc6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use array dereferencing notation ptr[expr] rather than the more
verbose and less readable *(ptr + expr).
Change-Id: Ie98986e7f622aa1a94f3f14bc362ed65767f9d92
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A count(T *list) was declared but not defined; and the plain count()
that was defined isn't called by anything. It's in a private header,
so can be removed without harm.
Task-number: QTPM-1385
Change-Id: I1ac580d57996895a4123b4f55fa984e9c8001ecb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QTest::qtest_qParseArgs() takes a needlessly mutable parameter.
This needs transient legacy version until qtdeclarative is converted
to use the const-qualified variant.
Change-Id: I19fad25423f6f1ea7d5fac537815f4f633ac4405
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This reverts 4fe68ffbe5,
1dfc16f6da and
9545bee98a2431d4ef4c3449631a5fcb8d9bd57a; this feature has not been in
use for some time, so is just dead code.
[ChangeLog][QtTestLib] Removed support for GPU_BLACKLIST files.
Reimplementations or equivalents of QTEST_MAIN() should remove their
uses of QTEST_ADD_GPU_BLACKLIST_SUPPORT and its _DEFS; they are still
vacuously defined, but serve no remaining purpose and shall be
undefined in due course.
Change-Id: I94ffd5c37ce4e1f7cf25d3c7ae8d40696b74c911
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The version we're using is at least seven years old.
Let's try staying up to date ...
Change-Id: I450a2fc37c22740fe554a81b471bf0fad340498e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qabstractitemmodeltester.cpp:223:31: internal compiler error: in expand_expr_real_1, at expr.c:9170
Change-Id: I098c1bdf706512c91c649205f4675de0ca374227
Reviewed-by: David Faure <david.faure@kdab.com>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QTestEventList refers to QTestEvent, which is an
implementation detail that should not appear in
documentation.
Task-number: QTBUG-68109
Change-Id: Id132889427b757ea17165c8b15ed47bcfb9e1c3f
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Makes it easier to run a test repeatedly until it crashes, and then
attach a debugger.
Change-Id: I8ad5d706becd77a2743a51927c837f3d1da08624
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Having the helpers in each respective module lets us implement the
helpers using private APIs without forcing the test to add private
dependencies.
It also makes it easier to test Qt using a third party testing
framework (for running the test suite), while still using the helpers
for ensuring tests behave expectedly.
Change-Id: I2a6ce24526ed345f3513548f11da05c7804c203f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The documentation for match() indicates that the index has to be valid
since it determines which column to search in (in addition to "from
which row"). So call match with a valid index, if the model isn't empty.
Change-Id: I5f3754cf14d053bf04d207cefe7dcc938e0f4a5a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The code (in macros) uses these classes, so the header should ensure
they are defined.
Change-Id: Ic68fa5559b7c0481927b47775b9cb7da12be7979
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Fix warnings about invalid function type casts (return types
conflicting with the FARPROC returned by GetProcAddress()) like:
corelib\global\qoperatingsystemversion_win.cpp💯48: error: cast between incompatible function types from 'FARPROC' {aka 'long long int (*)()'} to 'RtlGetVersionFunction' {aka 'long int (*)(_OSVERSIONINFOW*)'} [-Werror=cast-function-type]
io\qlockfile_win.cpp:158:85: error: cast between incompatible function types from 'FARPROC' {aka 'long long int (*)()'} to 'GetModuleFileNameExFunc' {aka 'long unsigned int (*)(void*, HINSTANCE__*, wchar_t*, long unsigned int)'} [-Werror=cast-function-type]
by introducing nested casts.
Task-number: QTBUG-68742
Task-number: QTQAINFRA-2095
Change-Id: I3a5d2ea901bf5dc35963c589d61cf3dc7393377a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When cross-compiling for Android on Windows the 'relative to test
source' option could end up possibly matching with a matching folder in
root ('/') because file is a Windows path and the canonicalFilePath of
that path is "".
Fixes tst_qxmlstream (and possibly others) on Android when Qt is
compiled on Windows.
Task-number: QTBUG-68596
Change-Id: I378374e41eea80f43680b3941adaa91fa604934a
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
inLoop is only set, never read and it is private. Since the class is public, it
can't be removed yet, but add a comment so that it will be removed when
possible.
Change-Id: I5e212194cb65626fce2b4c7b68801a73dbe3f500
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Currently when doing comparison with std::tuple the fallback toString
method is called which returns a Q_NULLPTR thus not allowing proper
diagnostic of the values that triggered an error. This patch
adds support for std::tuple to improve the tests output readability.
[ChangeLog][QtTest][QCOMPARE] Now outputs contents of std::tuple on
failure.
Change-Id: I046a55e2ce44c3f7728d51e4745120d38aa5e007
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch removes a bad hack for Unity issue described in QTBUG-67757.
The workaround from 243a0660e1 caused
even more problems, see QTBUG-63542.
Besides causing more problems, the usage of this hack was inconsistent.
The goal was to get stable geometry before continuing further in the test
function. The same logic should have been used in qWaitForWindowExposed().
It was never documented that only qWaitForWindowActive() has this tweak.
Also this hack was needed only for Unity, instead being unconditionally
executed for all platforms.
Task-number: QTBUG-67757
Change-Id: I7b7fb4b09151c4ab4807282006d7f956b18f60ad
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This will make two floating points containing NaN compare as equal,
instead of the regular nan != nan IEEE behavior (which isn't very useful
in a unit-test framework).
Note that this does not apply to indirect comparisons, for example via
QVariant.
Change-Id: I39332e0a867442d58082fffd150851acfdd18c23
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It depends on QAbstractItemModel, so we need to switch it off if
itemmodel is unavailable.
Change-Id: I97246767a5e387b7a2cee90c34125a8411ef1c4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This follows the naming convention for global headers and causes
qttestglobal.h to be added to the top of the generated QtTest header. It
is necessary to have it there when other headers depend on features
defined in configure.json.
[ChangeLog][QtTest] The qtest_global.h header is now deprecated. Include
qttestglobal.h instead.
Change-Id: Iaed639d4e13dd99cee6387fce9d15d6e55b0b1e8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This helps to distinguish timeouts from real crashes in COIN.
This is already done for Windows.
Change-Id: I4daeafa36f50482d20cea4bd1106647081ff7abe
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Use QT_CONFIG(regularexpression), disentangle it from QT_BOOTSTRAPPED,
switch it off in the bootstrap build, remove the #ifdefs from
qregularexpression.{h|cpp}, and add QT_REQUIRE_CONFIG(regularexpression)
to the header.
qregularexpression.{h|cpp} are already correctly excluded in tools.pri
if !qtConfig(regularexpression).
Change-Id: I21de154a6a118b76f99003d3acb72ac1e220d302
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Useful for making sense of the event dispatcher, especially when running
tests.
Change-Id: Iea84bcfb40d4954439c2e31ffc0197c64907e800
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The Test Anything Protocol (TAP), was originally Perl's simple text-based
interface between testing modules and test harnesses, but has since been
adopted by a large number of producers and consumers in many different
languages, which allows colorizing and summarizing test results.
The format is very simple:
TAP version 13
ok 1 - test description
not ok 2 - test description
---
message: 'Failure message'
severity: fail
expected: 123
actual: 456
...
ok 3 - test description # SKIP
1..3
The specification [1] is very brief, so the implementation has been
based on how typical consumers behave, especially when it comes to
the undefined diagnostics block.
[1] http://testanything.org/tap-version-13-specification.html
Change-Id: I616e802ea380165c678510e940ddc6607d39c92d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtTestLib uses its own message handler for plain text logging, so it doesn't
go though the logic in qDefaultMessageHandler that dispatches logging to
alternate logging sinks.
Building on the approach of Android and Windows, we log to AUL from the
plain text logger. A future improvement in this area would be to make
QtTestLib make more use of the infrastructure in qlogging.cpp, but this
is a bigger task and requires a better overview of the requirements.
The AUL code has been isolated into a wrapper, to allow logging both
to AUl and to e.g. the QPlainTextLogger. This is needed so that we
short circuit the plain text logger in case AUL already has handled
printing to stderr.
Change-Id: Iee0c3902190bd081b7ffbaf77c41b3118ce7f6da
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The privately exported qt_logging_to_console() function has been renamed
to shouldLogToStderr, and exported in the QtPrivate namespace for QtTestLib.
[ChangeLog][Important behavior changes][Logging (including qDebug and
qWarning)] The QT_LOGGING_TO_CONSOLE environment variable has been
deprecated. Use the more specific QT_ASSUME_STDERR_HAS_CONSOLE or
QT_FORCE_STDERR_LOGGING, depending on your usecase.
Change-Id: Ie29228eeac3b700c3de94fee022d5d66d9b5c210
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 2eec3272c7.
The change to qWaitForWindowActive causes regressions
in qtdeclarative, so we need a better fix for the problems
we have with window waiting.
Task-number: QTBUG-66866
Change-Id: I8300dabc870d6aeaa9ba6bfcf3d64146b13c1955
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Based on the information we got from Unity developers, we need
to check for window's frame geometry to be set, not just window's
position to be set. On various window managers, a window is
'ready' once the frame geometry is set. This fixes autotest
flakiness of tests that use qWaitForWindowActive.
Task-number: QTBUG-66216
Change-Id: Icb664e7b802b474919f3b058c00681574522ccbe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Commit cf4a611115 refactored out test
identifier buildup into a standalone function, but it returned the
QTestCharBuffer as a value type, which ultimately caused it to crash:
Unfortunately QTestCharBuffer is not copied correctly: Since it uses the
default copy ctor it will copy the buf pointer and create a deep copy of
the staticBuf pointer. When the dtor was later called it would then end up
calling free(buf) (where buf pointed to the staticBuf of the original
QTestCharBuffer).
Task-number: QTBUG-66607
Change-Id: Ifa290658be6f077a0d6613451c26aeeffc8df41c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 6ffb358822)
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Move ivars into @implementation
- Use instancetype where applicable
- Use dot notation for property access
- Use subscript operator for dictionaries and arrays
- Format selectors consistently
- Use proper style for init methods
- Use generics instead of void pointers where possible
- Use "range for" loops instead of indexing
- Replace or replace IBAction/IBOutlet with void
Change-Id: I1667812a51d4dfe44ae80fe337cb1f4bc9699d92
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add formatting for registered enumerations based on QMetaEnum
and unregistered enumerations as hex values.
[ChangeLog][QtTest] QtTest now prints values of QFlags that failed to
compare with QCOMPARE.
Task-number: QTBUG-65845
Change-Id: I3eae6d20d3c0d72441ca6c4037d9a8dafa4b6357
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit cf4a611115 refactored out test
identifier buildup into a standalone function, but it returned the
QTestCharBuffer as a value type, which ultimately caused it to crash:
Unfortunately QTestCharBuffer is not copied correctly: Since it uses the
default copy ctor it will copy the buf pointer and create a deep copy of
the staticBuf pointer. When the dtor was later called it would then end up
calling free(buf) (where buf pointed to the staticBuf of the original
QTestCharBuffer).
Change-Id: Ifa290658be6f077a0d6613451c26aeeffc8df41c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The remaining time will be fetched again after checking the predicate, so the
read value was never used.
Change-Id: I627152116ea579577e490ecefbaee02fec4aabdc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Assuming this is someone's first contact with testlib, we want to
mention QCOMPARE. Make the whole thing a bit more readable instead of
squeezing everything into single lines and add a bit more code.
Change-Id: I76908003427277670d1199774083a3ee01b8747c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QtTestLib has its own message handler installed via qInstallMessageHandler,
so there is no need to set QT_LOGGING_TO_CONSOLE to force stderr output,
as that's what QPlainTestLogger::outputMessage uses anyways.
And in the case of using other testlib outputs such as XML, we're not going
to hit any of the code paths that would check QT_LOGGING_TO_CONSOLE.
The only relevant exception is Windows, which checks stderrHasConsoleAttached(),
which is affected by QT_LOGGING_TO_CONSOLE, but Qt Creator actually has an
explicit inversion of this existing code, to prevent it from setting
QT_LOGGING_TO_CONSOLE, so that output ends up in OutputDebugStringA
and can be read and distinguished from the debugger's output.
See QTCREATORBUG-16161.
Change-Id: Ia8a9b00b221ec5691b52485586f172c9261bf299
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We do add, remove or update third party code in minor releases,
sometimes even in patch level releases. However, the documentation is
supposed to be valid for all existing Qt 5 versions, but doing this for
attributions would require infrastructure we don't have.
Therefore rather make it explicit which Qt version the attributions
apply to. Also mention since when Qt is available under LGPLv3
(starting with Qt 5.4).
Task-number: QTBUG-65665
Change-Id: I328b5bf0c143f78ea61aad51f0644c3cbb6dee49
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This update also corrects all the remaining qdoc warnings
in the mnodule.
Change-Id: I1cea2cb1dd515d075a1e49a52ca78fc407c3a324
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
AKA the model tester, living in QtTestLib now.
Underwent some significant refactoring from the original modeltester:
in particular, it will stop testing illegal indices.
[ChangeLog][QtTestLib] Added QAbstractItemModelTester, a class
to help testing item models.
Change-Id: I0e5efed7217330be11465ce3abb3590f3f2601a4
Reviewed-by: David Faure <david.faure@kdab.com>
So invert the list and let "msvc-2017" be the latest, at least until we
know about a different version.
Change-Id: I39332e0a867442d58082fffd1504c316e27f51d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The update adds the moduleheader variable to the qdocconf
file for qttestlib.qdocconf and qmake.qdocconf. The problem with
qmake is that it doesn't have a module header file, but it does
have qmake_pch.h, which is used here. This update also corrects
several \fn commands in the qttestlib docs.
Change-Id: I2202b9db96390bac1ee491ca8a99ca9010057ce3
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Add the command line switch added in change
184c5470f534119b27c1a4caec29d699aba9c234 on qtdeclarative to the
help output of the qmltestrunner application.
Change-Id: I9f42719500e0039afa6a5b0f1f365611855229b3
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Edward Welbourne
Vitaly Fanaskov
Lars Knoll
Thiago Macieira
Friedemann Kleint
Marc Mutz
Alexandru Croitor
Tasuku Suzuki
Jan Arve Sæther
Ulf Hermann
Liang Qi
Simon Hausmann
Heikki Halmet
Giuseppe D'Angelo
Albert Astals Cid
Topi Reinio
Tobias Hunger
Martin Smith
Samuel Gaist
Milian Wolff
Allan Sandfeld Jensen
Qt Forward Merge Bot
Mårten Nordheim
Tor Arne Vestbø
Kevin Funk
Oliver Wolff
Robert Loehning
Mikhail Svetkin
Tony Sarajärvi
Christian Ehrlicher
Nico Vertriest
Paul Wicking
Sergio Martins
Venugopal Shivashankar
Kai Koehne
David Faure
Kari Oikarinen
Samuel Gaist
Gatis Paeglis
Filipe Azevedo
Ville Voutilainen
Jake Petroules
Jarek Kobus
Frederik Gladhorn
Jan Murawski