TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixed the other tests that used the methods, so that they now get the
data from QLocale instead; and added the missing feature #if-ery, as
these are textdate methods.
Change-Id: I896f356bdf88037db23590c71d0aeb0b8722bfa7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The code had min and max of an integral type and tested min + min / 2,
which naturally overflowed, provoking a compiler warning. The test
was meant to be testing min - min / 2; but min is even, so this is
just min / 2; and doubling that won't overflow (which is what the test
is about). As it happens, min + min / 2 is in fact max - max / 2,
which *would* be a good value to test, since max is odd. So add a
test for that and remove the broken test.
Change-Id: Iec34acbf0d5d7993d41ff844875dc10480b8eb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Don't just wait for 300ms for the thread to finish, this can
lead to faling tests esp. on slow hardware.
Also fix a mem leak.
Change-Id: Ifa90da5507fc6d65ef77e368d7c238271623ff53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use move on the existing value as well so the constructor makes more
of a difference.
Change-Id: Iee2080da7b7d2d88eb108f0448c61423c7256979
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And export the required symbols in OpenSSL so we can run the test there
as well even if it's not needed for any functionality.
Change-Id: I4246d2b0bbdd42079d255f97f3c66ce8bb37390b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QSqlError::text() returns single space if QSqlError is not valid. In
addition, it adds space in case one of driverText or databaseText
is empty.
Change condition upon which space is added between databaseText and
driverText, and update unit test to cover these cases.
Fixes: QTBUG-74575
Change-Id: I52cce9b0287a523d7ff9059cff38bcd8b26eb303
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using a style that wants to draw into the layout's margin (like
macOS style does with group box titles), parts of the widgets would be
clipped by the parent if the available margin is smaller than necessary.
This moves the x/y coordinates to at least 0/0, and adjusts width and
height accordingly.
[ChangeLog][QtWidgets][QLayout] Prevent clipping of group box titles
on macOS (and similar styles that draw into layout margins)
Change-Id: I32148a92858c13fb2325da4d0a2a58996e0e8930
Fixes: QTBUG-67608
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
[ChangeLog][QtCore] Added support of deduction guides for QPair
Change-Id: I41a798390dc2c925b0f8432ba12aa345724de2d7
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
They are the only Qt symbols neither prefixed with q or with the Qt
namespace. This changes preserves source and binary compatibility
while making it possible to define conflicting symbols.
Change-Id: I6d4181206e63faa922fa0c8b644e0a4b88826a97
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is flaky which was uncovered by the upcoming
QTimer::singleShot optimization patches:
When the Emitter's thread is started and executes the timout functor
before the state machine is started, then the state machine will never
see the emitSignalWithNoArg signal and thus never transition to the
final state and finish.
This patch ensures that the code in the background thread is only run
after the state machine was started to fix this flakyness.
Change-Id: I6f91a2420165662ece75e550a6d73fe098137d4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initially TESTSERVER_COMPOSE_FILE could be manually specified.
Later this got removed by accident. Re-enable this feature.
Furthermore, check if a module has a platform-specific compose file. If
not, fall back to a default docker-compose.yml. This is useful to
include testserver.pri from other modules, where no platform-specific
requirements are present, ie the image from provisioning works on all
platforms.
Change-Id: Icb92552fd61196be332b2431ab0f8a43b9157fc8
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore][QVariant] Fixed a bug that caused isNull() to be
true after downcasting a QObject* payload using convert().
Fixes: QTBUG-73196
Change-Id: Ifda15952f873d7142c95609b69ac424bbf16b723
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Copy the test data into a temporary directory and do all the work there
without tainting the source directory. More importantly, do not pull in
any settings from the Qt build to test what actual users will encounter.
Change-Id: I793b86bfadb7597efb47c8f2d3fc863384c78a79
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
A QCOMPARE(..., true) isn't much use; and failure would have set the
object's .errorString(), which seems like it'd be worth reporting, so
use QVERIFY2() instead.
Change-Id: I2f3f9379984694891de81d2ffebc696d91eec70f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rules of std don't permit us to add an overload for
fpclassify(qfloat16), so we need our own equivalent that we *can*
overload. Deploy it in the few places we use fpclassify().
Extended qnumeric's testing to cover qFpClassify().
Change-Id: Ie5a0a5cc24599d1571404c573d33c682b0d305a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Renamed the test, since it covers both, verified slightly more and
added checks that QCOMPARE() copes as intended. Fixed some minor
coding-style defects in the process.
Change-Id: I49c2ffa0568a29e9e4b7f7395d4cacdeb0401da0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While touching the code, deduplicate some methods.
Change-Id: I28f469f0e9ae000a34466b0ecc604b5f3bd09e63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moc now successfully parses enum values, that have been deprecated with
[[deprecated]]. This is valid c++17 and should be handled correctly.
By adding that functionality it is possible to parse Windows headers
which use this deprecation mechanism.
To make sure, that moc works correctly even on compilers that do not
support deprecated enum values yet, the auto test explicitly uses
[[deprecated]] enum values during moc run.
Fixes: QTBUG-74126
Change-Id: I7b9d9a49af6093a97f8fdb800ffbc5af3d54d262
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Previous blacklisting 5c4e5032b5 only
covered RHEL 6.6 and RHEL 7.4. The problem however exists in all
6.x and 7.x distros as they have the same openssl.
This however leaves us the problem with future RHEL 8. This will
keep blacklisting these tests there as well. We need a way to blacklist
versions with a wildcard so that we could say RHEL-7.*
Task-number: QTBUG-46203
Change-Id: I2cc52ba2eac949214ecaa02e19d9e623d5befc49
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qt_asciiToDouble accepts a length parameter, so we can just pass
that through. No need for explicitly null-terminating, which is
where the copy of the data would be made.
Change-Id: I4e7921541f03295a2fae6171b35157084ff3ed8c
Fixes: QTBUG-65748
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for SecureTransport backend. OpenSSL, while reading
RSA/DSA, is internally calling EVP_BytesToKey that
essentially does the same thing this patch does in
'deriveAesKey' and thus able to correctly decrypt
whatever it first encrypted (while generating/
encrypting keys).
Fixes: QTBUG-54422
Change-Id: Ia9f7599c5b19bf364c179f2abd2aab7ea5359a65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Edward Welbourne
Lars Knoll
Jędrzej Nowacki
Mårten Nordheim
Allan Sandfeld Jensen
Friedemann Kleint
Vincas Dargis
Volker Hilsheimer
Mikhail Svetkin
Milian Wolff
Maurice Kalinowski
Kari Oikarinen
Timo Lang
Tony Sarajärvi
Qt Forward Merge Bot
Joerg Bornemann
Jesus Fernandez
Liang Qi
Kai Koehne
Anton Kudryavtsev
Timur Pocheptsov
Oliver Wolff
hjk